2018-01-22T18:05:33.236Z,1516644333.236 [Supervisor](DEBUG): Initializing supervisor.
2018-01-22T18:05:33.238Z,1516644333.238 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-01-22T18:05:33.239Z,1516644333.239 [SyncHandler](INFO): Protected caller Thread ID is 1051
2018-01-22T18:05:33.239Z,1516644333.239 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-01-22T18:05:33.240Z,1516644333.240 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-01-22T18:05:33.241Z,1516644333.241 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1052
2018-01-22T18:05:33.243Z,1516644333.243 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-01-22T18:05:33.254Z,1516644333.254 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-01-22T18:05:33.255Z,1516644333.255 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-01-22T18:05:33.256Z,1516644333.256 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1053
2018-01-22T18:05:33.256Z,1516644333.256 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-01-22T18:05:33.257Z,1516644333.257 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-01-22T18:05:33.258Z,1516644333.258 [logger ThreadHandler](INFO): Protected caller Thread ID is 1054
2018-01-22T18:05:33.260Z,1516644333.260 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-01-22T18:05:33.260Z,1516644333.260 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-01-22T18:05:33.261Z,1516644333.261 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-01-22T18:05:33.436Z,1516644333.436 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-01-22T18:05:33.437Z,1516644333.437 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-01-22T18:05:33.568Z,1516644333.568 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-01-22T18:05:33.568Z,1516644333.568 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-01-22T18:05:33.867Z,1516644333.867 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-01-22T18:05:33.867Z,1516644333.867 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-01-22T18:05:33.996Z,1516644333.996 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-01-22T18:05:33.996Z,1516644333.996 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-01-22T18:05:34.076Z,1516644334.076 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-01-22T18:05:34.261Z,1516644334.261 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-01-22T18:05:34.262Z,1516644334.262 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-01-22T18:05:34.357Z,1516644334.357 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-01-22T18:05:34.357Z,1516644334.357 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-01-22T18:05:34.662Z,1516644334.662 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-01-22T18:05:34.663Z,1516644334.663 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-01-22T18:05:34.983Z,1516644334.983 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-01-22T18:05:34.984Z,1516644334.984 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-01-22T18:05:35.257Z,1516644335.257 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-01-22T18:05:35.257Z,1516644335.257 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-01-22T18:05:35.719Z,1516644335.719 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-01-22T18:05:35.720Z,1516644335.720 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-01-22T18:05:35.917Z,1516644335.917 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-01-22T18:05:35.917Z,1516644335.917 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-01-22T18:05:36.013Z,1516644336.013 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-01-22T18:05:36.014Z,1516644336.014 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-01-22T18:05:36.444Z,1516644336.444 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-01-22T18:05:36.444Z,1516644336.444 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-01-22T18:05:36.547Z,1516644336.547 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-01-22T18:05:36.549Z,1516644336.549 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2018-01-22T18:05:36.550Z,1516644336.550 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2018-01-22T18:05:36.811Z,1516644336.811 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-01-22T18:05:36.812Z,1516644336.812 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2018-01-22T18:05:36.905Z,1516644336.905 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2018-01-22T18:05:37.004Z,1516644337.004 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2018-01-22T18:05:37.097Z,1516644337.097 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2018-01-22T18:05:37.181Z,1516644337.181 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2018-01-22T18:05:37.323Z,1516644337.323 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2018-01-22T18:05:37.479Z,1516644337.479 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2018-01-22T18:05:37.613Z,1516644337.613 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2018-01-22T18:05:37.706Z,1516644337.706 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2018-01-22T18:05:37.788Z,1516644337.788 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2018-01-22T18:05:37.943Z,1516644337.943 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/root/
2018-01-22T18:05:37.944Z,1516644337.944 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-01-22T18:05:37.947Z,1516644337.947 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-01-22T18:05:38.071Z,1516644338.071 [SBIT](DEBUG): Construct Startup Built In Test.
2018-01-22T18:05:38.101Z,1516644338.101 [SBIT] Loaded
2018-01-22T18:05:38.101Z,1516644338.101 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-01-22T18:05:38.101Z,1516644338.101 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-01-22T18:05:38.128Z,1516644338.128 [IBIT] Loaded
2018-01-22T18:05:38.128Z,1516644338.128 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-01-22T18:05:38.132Z,1516644338.132 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-01-22T18:05:38.282Z,1516644338.282 [CBIT] Loaded
2018-01-22T18:05:38.282Z,1516644338.282 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-01-22T18:05:38.283Z,1516644338.283 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-01-22T18:05:38.283Z,1516644338.283 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-01-22T18:05:38.348Z,1516644338.348 [VerticalControl](DEBUG): Construct VerticalControl.
2018-01-22T18:05:38.505Z,1516644338.505 [VerticalControl] Loaded
2018-01-22T18:05:38.505Z,1516644338.505 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-01-22T18:05:38.506Z,1516644338.506 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-01-22T18:05:38.564Z,1516644338.564 [HorizontalControl] Loaded
2018-01-22T18:05:38.565Z,1516644338.565 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-01-22T18:05:38.565Z,1516644338.565 [SpeedControl](DEBUG): Construct SpeedControl.
2018-01-22T18:05:38.571Z,1516644338.571 [SpeedControl] Loaded
2018-01-22T18:05:38.571Z,1516644338.571 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-01-22T18:05:38.572Z,1516644338.572 [LoopControl](DEBUG): Construct LoopControl.
2018-01-22T18:05:38.572Z,1516644338.572 [LoopControl] Loaded
2018-01-22T18:05:38.572Z,1516644338.572 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-01-22T18:05:38.573Z,1516644338.573 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-01-22T18:05:38.573Z,1516644338.573 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-01-22T18:05:38.612Z,1516644338.612 [DepthRateCalculator] Loaded
2018-01-22T18:05:38.613Z,1516644338.613 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-01-22T18:05:38.618Z,1516644338.618 [PitchRateCalculator] Loaded
2018-01-22T18:05:38.618Z,1516644338.618 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-01-22T18:05:38.634Z,1516644338.634 [SpeedCalculator] Loaded
2018-01-22T18:05:38.634Z,1516644338.634 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-01-22T18:05:38.655Z,1516644338.655 [TempGradientCalculator] Loaded
2018-01-22T18:05:38.655Z,1516644338.655 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-01-22T18:05:38.670Z,1516644338.670 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-01-22T18:05:38.670Z,1516644338.670 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-01-22T18:05:38.675Z,1516644338.675 [YawRateCalculator] Loaded
2018-01-22T18:05:38.675Z,1516644338.675 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-01-22T18:05:38.676Z,1516644338.676 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-01-22T18:05:38.676Z,1516644338.676 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-01-22T18:05:38.758Z,1516644338.758 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-01-22T18:05:38.758Z,1516644338.758 [StratificationFrontDetector](DEBUG): (re)initializing
2018-01-22T18:05:38.758Z,1516644338.758 [StratificationFrontDetector] Loaded
2018-01-22T18:05:38.758Z,1516644338.758 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-01-22T18:05:38.759Z,1516644338.759 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-01-22T18:05:38.760Z,1516644338.760 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-01-22T18:05:38.984Z,1516644338.984 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-01-22T18:05:38.985Z,1516644338.985 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-01-22T18:05:39.079Z,1516644339.079 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-01-22T18:05:39.079Z,1516644339.079 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-01-22T18:05:39.132Z,1516644339.132 [DeadReckonUsingSpeedCalculator] Loaded
2018-01-22T18:05:39.132Z,1516644339.132 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-01-22T18:05:39.185Z,1516644339.185 [DeadReckonWithRespectToSeafloor] Loaded
2018-01-22T18:05:39.185Z,1516644339.185 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-01-22T18:05:39.201Z,1516644339.201 [NavChart] Loaded
2018-01-22T18:05:39.202Z,1516644339.202 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-01-22T18:05:39.205Z,1516644339.205 [UniversalFixResidualReporter] Loaded
2018-01-22T18:05:39.206Z,1516644339.206 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-01-22T18:05:39.206Z,1516644339.206 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-01-22T18:05:39.207Z,1516644339.207 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-01-22T18:05:39.219Z,1516644339.219 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-01-22T18:05:39.220Z,1516644339.220 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-01-22T18:05:39.389Z,1516644339.389 [Aanderaa_O2] Loaded
2018-01-22T18:05:39.389Z,1516644339.389 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-01-22T18:05:39.435Z,1516644339.435 [CTD_Seabird] Loaded
2018-01-22T18:05:39.435Z,1516644339.435 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-01-22T18:05:39.437Z,1516644339.437 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D34E0
2018-01-22T18:05:39.437Z,1516644339.437 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 1133
2018-01-22T18:05:39.453Z,1516644339.453 [ESPComponent] Loaded
2018-01-22T18:05:39.453Z,1516644339.453 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-01-22T18:05:39.467Z,1516644339.467 [PAR_Licor] Loaded
2018-01-22T18:05:39.468Z,1516644339.468 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-01-22T18:05:39.515Z,1516644339.515 [WetLabsBB2FL] Loaded
2018-01-22T18:05:39.516Z,1516644339.516 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-01-22T18:05:39.517Z,1516644339.517 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407034E0
2018-01-22T18:05:39.517Z,1516644339.517 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 1134
2018-01-22T18:05:39.518Z,1516644339.518 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-01-22T18:05:39.518Z,1516644339.518 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-01-22T18:05:39.768Z,1516644339.768 [DataOverHttps] Loaded
2018-01-22T18:05:39.769Z,1516644339.769 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-01-22T18:05:39.774Z,1516644339.774 [DropWeight] Loaded
2018-01-22T18:05:39.774Z,1516644339.774 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-01-22T18:05:39.861Z,1516644339.861 [NAL9602] Loaded
2018-01-22T18:05:39.862Z,1516644339.862 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-01-22T18:05:39.867Z,1516644339.867 [Onboard] Loaded
2018-01-22T18:05:39.867Z,1516644339.867 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-01-22T18:05:39.874Z,1516644339.874 [Radio_Surface] Loaded
2018-01-22T18:05:39.874Z,1516644339.874 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-01-22T18:05:39.875Z,1516644339.875 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409474E0
2018-01-22T18:05:39.876Z,1516644339.876 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1135
2018-01-22T18:05:40.001Z,1516644340.001 [DAT] Loaded
2018-01-22T18:05:40.002Z,1516644340.002 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-01-22T18:05:40.048Z,1516644340.048 [PNI_TCM] Loaded
2018-01-22T18:05:40.048Z,1516644340.048 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-01-22T18:05:40.107Z,1516644340.107 [Rowe_600LCM] Loaded
2018-01-22T18:05:40.107Z,1516644340.107 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2018-01-22T18:05:40.108Z,1516644340.108 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409774E0
2018-01-22T18:05:40.109Z,1516644340.109 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 1136
2018-01-22T18:05:41.912Z,1516644341.912 [BPC1] Loaded
2018-01-22T18:05:41.912Z,1516644341.912 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-01-22T18:05:41.913Z,1516644341.913 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-01-22T18:05:41.913Z,1516644341.913 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-01-22T18:05:42.013Z,1516644342.013 [BuoyancyServo] Loaded
2018-01-22T18:05:42.014Z,1516644342.014 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-01-22T18:05:42.025Z,1516644342.025 [ElevatorServo] Loaded
2018-01-22T18:05:42.026Z,1516644342.026 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-01-22T18:05:42.036Z,1516644342.036 [MassServo] Loaded
2018-01-22T18:05:42.037Z,1516644342.037 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-01-22T18:05:42.048Z,1516644342.048 [RudderServo] Loaded
2018-01-22T18:05:42.048Z,1516644342.048 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-01-22T18:05:42.059Z,1516644342.059 [ThrusterServo] Loaded
2018-01-22T18:05:42.059Z,1516644342.059 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-01-22T18:05:42.060Z,1516644342.060 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-01-22T18:05:42.060Z,1516644342.060 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-01-22T18:05:42.184Z,1516644342.184 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-01-22T18:05:42.185Z,1516644342.185 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-01-22T18:05:42.209Z,1516644342.209 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-01-22T18:05:42.212Z,1516644342.212 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-01-22T18:05:42.213Z,1516644342.213 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-01-22T18:05:42.220Z,1516644342.220 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-01-22T18:05:42.221Z,1516644342.221 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A1E4E0
2018-01-22T18:05:42.221Z,1516644342.221 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1137
2018-01-22T18:05:42.226Z,1516644342.226 [Supervisor](INFO): Main Thread ID is 796
2018-01-22T18:05:42.226Z,1516644342.226 [Supervisor](DEBUG): Running supervisor.
2018-01-22T18:05:42.227Z,1516644342.227 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1138
2018-01-22T18:05:42.229Z,1516644342.229 [controlThread ThreadHandler](INFO): Handler Thread ID is 1139
2018-01-22T18:05:42.230Z,1516644342.230 [controlThread](DEBUG): Initializing ControlThread
2018-01-22T18:05:42.231Z,1516644342.231 [SBIT](INFO): Initialize SBIT Component.
2018-01-22T18:05:42.231Z,1516644342.231 [SBIT](IMPORTANT): git: 2017-12-12-30-gb0f7ff6
2018-01-22T18:05:42.231Z,1516644342.231 [SBIT](INFO): git hash: b0f7ff6b53ac09de70ba82b711a5c931a61d8eb6
2018-01-22T18:05:42.232Z,1516644342.232 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-01-22T18:05:42.233Z,1516644342.233 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-01-22T18:05:42.234Z,1516644342.234 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2018-01-22T18:05:42.235Z,1516644342.235 [IBIT](INFO): Initialize IBIT Component.
2018-01-22T18:05:42.235Z,1516644342.235 [CBIT](DEBUG): Initialize CBIT Component.
2018-01-22T18:05:42.236Z,1516644342.236 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2018-01-22T18:05:42.236Z,1516644342.236 [logger ThreadHandler](INFO): Handler Thread ID is 1140
2018-01-22T18:05:42.263Z,1516644342.263 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 1141
2018-01-22T18:05:42.264Z,1516644342.264 [CTD_Seabird](INFO): Initializing
2018-01-22T18:05:42.299Z,1516644342.299 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 1143
2018-01-22T18:05:42.301Z,1516644342.301 [WetLabsBB2FL](INFO): Powering down
2018-01-22T18:05:42.335Z,1516644342.335 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1144
2018-01-22T18:05:42.341Z,1516644342.341 [Radio_Surface](INFO): Powering up
2018-01-22T18:05:42.343Z,1516644342.343 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-01-22T18:05:42.345Z,1516644342.345 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-01-22T18:05:42.346Z,1516644342.346 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-01-22T18:05:42.347Z,1516644342.347 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-01-22T18:05:42.347Z,1516644342.347 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-22T18:05:42.347Z,1516644342.347 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-01-22T18:05:42.348Z,1516644342.348 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-01-22T18:05:42.348Z,1516644342.348 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-01-22T18:05:42.348Z,1516644342.348 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-01-22T18:05:42.349Z,1516644342.349 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-01-22T18:05:42.350Z,1516644342.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:05:42.351Z,1516644342.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:05:42.351Z,1516644342.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:05:42.352Z,1516644342.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:05:42.352Z,1516644342.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:05:42.353Z,1516644342.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:05:42.353Z,1516644342.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:05:42.354Z,1516644342.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:05:42.354Z,1516644342.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:05:42.354Z,1516644342.354 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-01-22T18:05:42.355Z,1516644342.355 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-01-22T18:05:42.367Z,1516644342.367 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 1145
2018-01-22T18:05:42.368Z,1516644342.368 [Rowe_600LCM](INFO): Initializing
2018-01-22T18:05:42.369Z,1516644342.369 [Rowe_600LCM](INFO): Checking LCM
2018-01-22T18:05:42.378Z,1516644342.378 [Rowe_600LCM](INFO): LCM OK
2018-01-22T18:05:42.378Z,1516644342.378 [Rowe_600LCM](INFO): Powering up
2018-01-22T18:05:42.384Z,1516644342.384 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-01-22T18:05:42.399Z,1516644342.399 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1146
2018-01-22T18:05:42.402Z,1516644342.402 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-01-22T18:05:42.403Z,1516644342.403 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-01-22T18:05:42.403Z,1516644342.403 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-01-22T18:05:42.403Z,1516644342.403 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-01-22T18:05:42.403Z,1516644342.403 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-01-22T18:05:42.403Z,1516644342.403 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-01-22T18:05:42.404Z,1516644342.404 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-01-22T18:05:42.405Z,1516644342.405 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-01-22T18:05:42.405Z,1516644342.405 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-01-22T18:05:42.405Z,1516644342.405 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-01-22T18:05:42.405Z,1516644342.405 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-01-22T18:05:42.434Z,1516644342.434 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-22T18:05:42.484Z,1516644342.484 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-01-22T18:05:42.485Z,1516644342.485 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-01-22T18:05:42.585Z,1516644342.585 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-01-22T18:05:42.586Z,1516644342.586 [Default:A.Wait](DEBUG): Construct Wait.
2018-01-22T18:05:42.587Z,1516644342.587 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-01-22T18:05:42.594Z,1516644342.594 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-22T18:05:42.594Z,1516644342.594 [CTD_Seabird](INFO): Powering down
2018-01-22T18:05:42.626Z,1516644342.626 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-01-22T18:05:42.645Z,1516644342.645 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-01-22T18:05:42.666Z,1516644342.666 [Default:E.Execute](DEBUG): Construct Execute.
2018-01-22T18:05:42.670Z,1516644342.670 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-01-22T18:05:42.675Z,1516644342.675 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-22T18:05:42.737Z,1516644342.737 [ESPComponent](INFO): powering down ESP
2018-01-22T18:05:43.087Z,1516644343.087 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-01-22T18:05:43.165Z,1516644343.165 [DAT](INFO): Powering up
2018-01-22T18:05:43.165Z,1516644343.165 [DAT](DEBUG): Initializing DAT.
2018-01-22T18:05:43.311Z,1516644343.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:43.400Z,1516644343.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:43.400Z,1516644343.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:43.404Z,1516644343.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:43.442Z,1516644343.442 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:43.465Z,1516644343.465 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:43.597Z,1516644343.597 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-01-22T18:05:43.603Z,1516644343.603 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-01-22T18:05:43.625Z,1516644343.625 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-01-22T18:05:43.635Z,1516644343.635 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-01-22T18:05:43.648Z,1516644343.648 [MassServo](DEBUG): Initializing EZServoServo.
2018-01-22T18:05:43.655Z,1516644343.655 [MassServo](DEBUG): Initializing MassServo.
2018-01-22T18:05:43.668Z,1516644343.668 [RudderServo](DEBUG): Initializing EZServoServo.
2018-01-22T18:05:43.675Z,1516644343.675 [RudderServo](DEBUG): Initializing RudderServo.
2018-01-22T18:05:43.689Z,1516644343.689 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-01-22T18:05:43.695Z,1516644343.695 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-01-22T18:05:43.739Z,1516644343.739 [CommandLine](FAULT): Scheduling is paused
2018-01-22T18:05:43.740Z,1516644343.740 [CBIT](INFO): Critical error at 20180122T180542
2018-01-22T18:05:43.740Z,1516644343.740 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-01-22T18:05:44.009Z,1516644344.009 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-01-22T18:05:44.009Z,1516644344.009 [DropWeight] Hardware Fault, FailCount= 1
2018-01-22T18:05:44.009Z,1516644344.009 [DropWeight](ERROR): Hardware Fault
2018-01-22T18:05:44.044Z,1516644344.044 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:44.047Z,1516644344.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.047Z,1516644344.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:44.048Z,1516644344.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:44.048Z,1516644344.048 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.049Z,1516644344.049 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.069Z,1516644344.069 [CBIT](INFO): Critical error at 20180122T180544
2018-01-22T18:05:44.072Z,1516644344.072 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-01-22T18:05:44.072Z,1516644344.072 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-01-22T18:05:44.213Z,1516644344.213 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:44.216Z,1516644344.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.216Z,1516644344.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:44.217Z,1516644344.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:44.218Z,1516644344.218 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.227Z,1516644344.227 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.632Z,1516644344.632 [CBIT](INFO): Critical error at 20180122T180544
2018-01-22T18:05:44.671Z,1516644344.671 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:44.674Z,1516644344.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.674Z,1516644344.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:44.675Z,1516644344.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:44.683Z,1516644344.683 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:44.683Z,1516644344.683 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.080Z,1516644345.080 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:45.083Z,1516644345.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.083Z,1516644345.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:45.084Z,1516644345.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:45.084Z,1516644345.084 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.085Z,1516644345.085 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.467Z,1516644345.467 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:45.469Z,1516644345.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.470Z,1516644345.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:45.471Z,1516644345.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:45.471Z,1516644345.471 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.472Z,1516644345.472 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:45.963Z,1516644345.963 [Aanderaa_O2](INFO): Powering down
2018-01-22T18:05:46.023Z,1516644346.023 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:46.026Z,1516644346.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.026Z,1516644346.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:46.035Z,1516644346.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:46.035Z,1516644346.035 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.036Z,1516644346.036 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.280Z,1516644346.280 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:46.284Z,1516644346.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.284Z,1516644346.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:46.285Z,1516644346.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:46.286Z,1516644346.286 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.287Z,1516644346.287 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-01-22T18:05:46.629Z,1516644346.629 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-01-22T18:05:46.732Z,1516644346.732 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:46.748Z,1516644346.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:46.749Z,1516644346.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:46.798Z,1516644346.798 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-01-22T18:05:46.836Z,1516644346.836 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-01-22T18:05:46.837Z,1516644346.837 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-01-22T18:05:46.837Z,1516644346.837 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-01-22T18:05:47.075Z,1516644347.075 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:47.079Z,1516644347.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:47.080Z,1516644347.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:47.516Z,1516644347.516 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:47.519Z,1516644347.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-01-22T18:05:47.520Z,1516644347.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:47.883Z,1516644347.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:47.897Z,1516644347.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:48.279Z,1516644348.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:48.300Z,1516644348.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:48.683Z,1516644348.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:48.704Z,1516644348.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:49.085Z,1516644349.085 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:49.122Z,1516644349.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:49.483Z,1516644349.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:49.492Z,1516644349.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:49.875Z,1516644349.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:49.888Z,1516644349.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:50.287Z,1516644350.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:50.301Z,1516644350.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:50.698Z,1516644350.698 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:50.712Z,1516644350.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:51.083Z,1516644351.083 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:51.096Z,1516644351.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:51.483Z,1516644351.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:51.489Z,1516644351.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:51.887Z,1516644351.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:51.908Z,1516644351.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:52.283Z,1516644352.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:52.296Z,1516644352.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:52.687Z,1516644352.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:52.692Z,1516644352.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:53.079Z,1516644353.079 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:53.084Z,1516644353.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:53.516Z,1516644353.516 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:53.534Z,1516644353.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:53.878Z,1516644353.878 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:53.912Z,1516644353.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:54.286Z,1516644354.286 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:54.312Z,1516644354.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:54.679Z,1516644354.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:54.700Z,1516644354.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:55.069Z,1516644355.069 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.10.9
Jan 13 2000 14:32:02 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2018-01-22T18:05:55.069Z,1516644355.069 [DAT](INFO): Got CONNECT
2018-01-22T18:05:55.083Z,1516644355.083 [DAT](INFO): entering command mode
2018-01-22T18:05:55.107Z,1516644355.107 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:55.112Z,1516644355.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:55.465Z,1516644355.465 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-22T18:05:55.483Z,1516644355.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:55.496Z,1516644355.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:55.864Z,1516644355.864 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-22T18:05:55.883Z,1516644355.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:55.896Z,1516644355.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:56.264Z,1516644356.264 [DAT](DEBUG): checking for command mode acknowledgment
2018-01-22T18:05:56.265Z,1516644356.265 [DAT](DEBUG): read user prompt 1: user:1>
2018-01-22T18:05:56.265Z,1516644356.265 [DAT](INFO): command mode acknowledged
2018-01-22T18:05:56.287Z,1516644356.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:56.292Z,1516644356.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:56.665Z,1516644356.665 [DAT](INFO): setting local address to 2
2018-01-22T18:05:56.697Z,1516644356.697 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:56.717Z,1516644356.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:57.081Z,1516644357.081 [DAT](DEBUG): checking for local address setting acknowledgment
2018-01-22T18:05:57.082Z,1516644357.082 [DAT](INFO): set local address to 2
2018-01-22T18:05:57.092Z,1516644357.092 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:57.097Z,1516644357.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:57.465Z,1516644357.465 [DAT](DEBUG): read user prompt 2: user:2>
2018-01-22T18:05:57.499Z,1516644357.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:57.515Z,1516644357.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:57.883Z,1516644357.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:57.898Z,1516644357.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:58.315Z,1516644358.315 [BPC1](INFO): Initialized
2018-01-22T18:05:58.327Z,1516644358.327 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:58.344Z,1516644358.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:58.687Z,1516644358.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:58.692Z,1516644358.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:59.140Z,1516644359.140 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:59.167Z,1516644359.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:59.508Z,1516644359.508 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:59.521Z,1516644359.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:05:59.879Z,1516644359.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:05:59.884Z,1516644359.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:00.283Z,1516644360.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:00.296Z,1516644360.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:00.675Z,1516644360.675 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:00.696Z,1516644360.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:01.094Z,1516644361.094 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:01.126Z,1516644361.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:01.483Z,1516644361.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:01.488Z,1516644361.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:01.875Z,1516644361.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:01.896Z,1516644361.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:02.324Z,1516644362.324 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:02.356Z,1516644362.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:02.688Z,1516644362.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:02.693Z,1516644362.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:03.123Z,1516644363.123 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:03.140Z,1516644363.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:03.477Z,1516644363.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:03.484Z,1516644363.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:03.953Z,1516644363.953 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:03.970Z,1516644363.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:04.275Z,1516644364.275 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:04.284Z,1516644364.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:04.679Z,1516644364.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:04.684Z,1516644364.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:05.122Z,1516644365.122 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:05.155Z,1516644365.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:05.475Z,1516644365.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:05.480Z,1516644365.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:05.875Z,1516644365.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:05.888Z,1516644365.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:06.311Z,1516644366.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:06.316Z,1516644366.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:06.702Z,1516644366.702 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:06.715Z,1516644366.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:07.104Z,1516644367.104 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:07.128Z,1516644367.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:07.490Z,1516644367.490 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:07.511Z,1516644367.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:07.903Z,1516644367.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:07.916Z,1516644367.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:08.283Z,1516644368.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:08.296Z,1516644368.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:08.683Z,1516644368.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:08.696Z,1516644368.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:09.091Z,1516644369.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:09.096Z,1516644369.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:09.491Z,1516644369.491 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:09.508Z,1516644369.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:09.883Z,1516644369.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:09.896Z,1516644369.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:09.923Z,1516644369.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:06:10.248Z,1516644370.248 [NAL9602](INFO): Powering up NAL9602
2018-01-22T18:06:10.279Z,1516644370.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:10.300Z,1516644370.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:10.683Z,1516644370.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:10.700Z,1516644370.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:10.719Z,1516644370.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:06:11.083Z,1516644371.083 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:11.096Z,1516644371.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:11.511Z,1516644371.511 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:11.517Z,1516644371.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:11.887Z,1516644371.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:11.900Z,1516644371.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:12.288Z,1516644372.288 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:12.296Z,1516644372.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:12.695Z,1516644372.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:12.708Z,1516644372.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:13.123Z,1516644373.123 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:13.128Z,1516644373.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:13.477Z,1516644373.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:13.494Z,1516644373.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:13.893Z,1516644373.893 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:13.907Z,1516644373.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:14.279Z,1516644374.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:14.293Z,1516644374.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:14.705Z,1516644374.705 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:14.718Z,1516644374.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:15.183Z,1516644375.183 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:15.208Z,1516644375.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:15.479Z,1516644375.479 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:15.492Z,1516644375.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:15.888Z,1516644375.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:15.900Z,1516644375.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:16.284Z,1516644376.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:16.293Z,1516644376.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:16.688Z,1516644376.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:16.698Z,1516644376.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:17.143Z,1516644377.143 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:17.167Z,1516644377.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:17.476Z,1516644377.476 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:17.505Z,1516644377.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:17.895Z,1516644377.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:17.900Z,1516644377.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:18.279Z,1516644378.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:18.319Z,1516644378.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:18.707Z,1516644378.707 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:18.719Z,1516644378.719 [CommandLine](IMPORTANT): got command show best depth
2018-01-22T18:06:18.720Z,1516644378.720 [CommandLine](IMPORTANT): depth best is null
2018-01-22T18:06:18.724Z,1516644378.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:19.141Z,1516644379.141 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:19.163Z,1516644379.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:19.487Z,1516644379.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:19.492Z,1516644379.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:19.893Z,1516644379.893 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:19.906Z,1516644379.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:20.279Z,1516644380.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:20.284Z,1516644380.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:20.691Z,1516644380.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:20.720Z,1516644380.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:21.091Z,1516644381.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:21.175Z,1516644381.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:21.444Z,1516644381.444 [NAL9602](INFO): NAL9602 initialized
2018-01-22T18:06:21.499Z,1516644381.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:21.508Z,1516644381.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:21.904Z,1516644381.904 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:21.917Z,1516644381.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:22.291Z,1516644382.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:22.328Z,1516644382.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:22.691Z,1516644382.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:22.724Z,1516644382.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:23.139Z,1516644383.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:23.144Z,1516644383.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:23.499Z,1516644383.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:23.536Z,1516644383.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:23.890Z,1516644383.890 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:23.903Z,1516644383.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:24.284Z,1516644384.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:24.293Z,1516644384.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:24.692Z,1516644384.692 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:24.697Z,1516644384.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:25.092Z,1516644385.092 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:25.101Z,1516644385.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:25.503Z,1516644385.503 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:25.508Z,1516644385.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:25.901Z,1516644385.901 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:25.910Z,1516644385.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:26.270Z,1516644386.270 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:26.307Z,1516644386.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:26.700Z,1516644386.700 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:26.705Z,1516644386.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:27.144Z,1516644387.144 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:27.161Z,1516644387.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:27.481Z,1516644387.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:27.494Z,1516644387.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:27.887Z,1516644387.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:27.896Z,1516644387.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:28.284Z,1516644388.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:28.293Z,1516644388.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:28.670Z,1516644388.670 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:28.703Z,1516644388.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:29.131Z,1516644389.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:29.153Z,1516644389.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:29.500Z,1516644389.500 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:29.513Z,1516644389.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:29.900Z,1516644389.900 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:29.909Z,1516644389.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:30.311Z,1516644390.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:30.316Z,1516644390.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:30.703Z,1516644390.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:30.712Z,1516644390.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:31.128Z,1516644391.128 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:31.156Z,1516644391.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:31.483Z,1516644391.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:31.500Z,1516644391.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:31.881Z,1516644391.881 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:31.890Z,1516644391.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:32.282Z,1516644392.282 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:32.295Z,1516644392.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:32.695Z,1516644392.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:32.700Z,1516644392.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:33.136Z,1516644393.136 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:33.153Z,1516644393.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:33.480Z,1516644393.480 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:33.489Z,1516644393.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:33.887Z,1516644393.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:33.892Z,1516644393.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:34.284Z,1516644394.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:34.293Z,1516644394.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:34.694Z,1516644394.694 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:34.703Z,1516644394.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:35.107Z,1516644395.107 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:35.112Z,1516644395.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:35.492Z,1516644395.492 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:35.501Z,1516644395.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:35.903Z,1516644395.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:35.912Z,1516644395.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:36.283Z,1516644396.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:36.300Z,1516644396.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:36.684Z,1516644396.684 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:36.693Z,1516644396.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:37.091Z,1516644397.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:37.100Z,1516644397.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:37.543Z,1516644397.543 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:37.548Z,1516644397.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:37.895Z,1516644397.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:37.904Z,1516644397.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:38.270Z,1516644398.270 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:38.311Z,1516644398.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:38.696Z,1516644398.696 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:38.701Z,1516644398.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:39.097Z,1516644399.097 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:39.112Z,1516644399.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:39.506Z,1516644399.506 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:39.527Z,1516644399.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:39.904Z,1516644399.904 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:39.913Z,1516644399.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:40.291Z,1516644400.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:40.300Z,1516644400.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:40.691Z,1516644400.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:40.700Z,1516644400.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:41.132Z,1516644401.132 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:41.145Z,1516644401.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:41.481Z,1516644401.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:41.486Z,1516644401.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:41.947Z,1516644401.947 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:41.952Z,1516644401.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:42.287Z,1516644402.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:42.296Z,1516644402.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:42.686Z,1516644402.686 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:42.701Z,1516644402.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:43.087Z,1516644403.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:43.154Z,1516644403.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:43.477Z,1516644403.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:43.486Z,1516644403.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:43.883Z,1516644403.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:43.910Z,1516644403.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:44.287Z,1516644404.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:44.292Z,1516644404.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:44.715Z,1516644404.715 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:44.720Z,1516644404.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:45.156Z,1516644405.156 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:45.169Z,1516644405.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:45.180Z,1516644405.180 [CommandLine](IMPORTANT): got command run ./Missions/Insert/Science.xml
2018-01-22T18:06:45.181Z,1516644405.181 [MissionManager](INFO): Loading Mission: ./Missions/Insert/Science.xml
2018-01-22T18:06:45.408Z,1516644405.408 [MissionManager](INFO): DefineArg Science.SampleISUS = 0 bool
2018-01-22T18:06:45.411Z,1516644405.411 [MissionManager](INFO): DefineArg Science.SampleISUSmaxPitch = 60.000000 arcdeg
2018-01-22T18:06:45.414Z,1516644405.414 [MissionManager](INFO): DefineArg Science.SampleISUSminPitch = -60.000000 arcdeg
2018-01-22T18:06:45.417Z,1516644405.417 [MissionManager](INFO): DefineArg Science.PeakDetectChlActive = 0 bool
2018-01-22T18:06:45.420Z,1516644405.420 [MissionManager](INFO): DefineArg Science.HighestChlPeakReportActive = 0 bool
2018-01-22T18:06:45.423Z,1516644405.423 [MissionManager](INFO): DefineArg Science.PatchTracking = 0 bool
2018-01-22T18:06:45.426Z,1516644405.426 [MissionManager](INFO): DefineArg Science.FilterWidthHorizontal = 3.000000 count
2018-01-22T18:06:45.492Z,1516644405.492 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:45.500Z,1516644405.500 [MissionManager](INFO): DefineArg Science.NumProfilesSlidingwindow = 100.000000 count
2018-01-22T18:06:45.506Z,1516644405.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:45.512Z,1516644405.512 [MissionManager](INFO): DefineArg Science.PeakDetectNO3Active = 0 bool
2018-01-22T18:06:45.519Z,1516644405.519 [MissionManager](INFO): DefineArg Science.PeakDetectOilActive = 0 bool
2018-01-22T18:06:45.539Z,1516644405.539 [MissionManager](INFO): DefineArg Science.UpwardDerivativeOfTemperatureActive = 0 bool
2018-01-22T18:06:45.542Z,1516644405.542 [MissionManager](INFO): DefineArg Science.EnabledAanderaaO2 = 1.000000 bool
2018-01-22T18:06:45.550Z,1516644405.550 [MissionManager](INFO): DefineArg Science.EnabledNeilBrown = 0.000000 bool
2018-01-22T18:06:45.558Z,1516644405.558 [MissionManager](INFO): DefineArg Science.EnabledSeabird = 1.000000 bool
2018-01-22T18:06:45.570Z,1516644405.570 [MissionManager](INFO): DefineArg Science.EnabledTurbulence_NPS = 0.000000 bool
2018-01-22T18:06:45.578Z,1516644405.578 [MissionManager](INFO): DefineArg Science.EnabledWetLabsBB2FL = 1.000000 bool
2018-01-22T18:06:45.595Z,1516644405.595 [MissionManager](INFO): DefineArg Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool
2018-01-22T18:06:45.603Z,1516644405.603 [MissionManager](INFO): DefineArg Science.EnabledISUS = 0.000000 bool
2018-01-22T18:06:45.619Z,1516644405.619 [MissionManager](INFO): DefineArg Science.LowPassWindowLength = 20.000000 count
2018-01-22T18:06:45.627Z,1516644405.627 [MissionManager](INFO): DefineArg Science.PeakChlShallowBound = nan m
2018-01-22T18:06:45.632Z,1516644405.632 [MissionManager](INFO): DefineArg Science.PeakChlDeepBound = nan m
2018-01-22T18:06:45.643Z,1516644405.643 [MissionManager](INFO): DefineOutput Science.PeakChl = 0.000000 ug/l
2018-01-22T18:06:45.651Z,1516644405.651 [MissionManager](INFO): DefineOutput Science.PeakChlDepth = 0.000000 m
2018-01-22T18:06:45.654Z,1516644405.654 [MissionManager](INFO): DefineOutput Science.PeakChlTemperature = 0.000000 degC
2018-01-22T18:06:45.662Z,1516644405.662 [MissionManager](INFO): DefineOutput Science.PeakChlLatitude = nan arcdeg
2018-01-22T18:06:45.669Z,1516644405.669 [MissionManager](INFO): DefineOutput Science.PeakChlLongitude = nan arcdeg
2018-01-22T18:06:45.673Z,1516644405.673 [MissionManager](INFO): DefineOutput Science.PeakNO3 = 0.000000 umol/l
2018-01-22T18:06:45.684Z,1516644405.684 [MissionManager](INFO): DefineOutput Science.PeakNO3Depth = 0.000000 m
2018-01-22T18:06:45.692Z,1516644405.692 [MissionManager](INFO): DefineOutput Science.PeakNO3Latitude = nan arcdeg
2018-01-22T18:06:45.699Z,1516644405.699 [MissionManager](INFO): DefineOutput Science.PeakNO3Longitude = nan arcdeg
2018-01-22T18:06:45.717Z,1516644405.717 [MissionManager](INFO): DefineOutput Science.PatchChl = 0.000000 m
2018-01-22T18:06:45.720Z,1516644405.720 [MissionManager](INFO): DefineOutput Science.PatchChlDepth = 0.000000 m
2018-01-22T18:06:45.731Z,1516644405.731 [MissionManager](INFO): DefineOutput Science.PatchChlLatitude = nan arcdeg
2018-01-22T18:06:45.739Z,1516644405.739 [MissionManager](INFO): DefineOutput Science.PatchChlLongitude = nan arcdeg
2018-01-22T18:06:45.742Z,1516644405.742 [MissionManager](INFO): DefineOutput Science.PatchChlDistance = nan arcdeg
2018-01-22T18:06:45.749Z,1516644405.749 [MissionManager](INFO): DefineOutput Science.PeakOil = 0.000000 kg/m3
2018-01-22T18:06:45.761Z,1516644405.761 [MissionManager](INFO): DefineOutput Science.PeakOilDepth = 0.000000 m
2018-01-22T18:06:45.766Z,1516644405.766 [MissionManager](INFO): DefineOutput Science.PeakOilLatitude = nan arcdeg
2018-01-22T18:06:45.774Z,1516644405.774 [MissionManager](INFO): DefineOutput Science.PeakOilLongitude = nan arcdeg
2018-01-22T18:06:45.819Z,1516644405.819 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:06:45.851Z,1516644405.851 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2018-01-22T18:06:45.907Z,1516644405.907 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:45.912Z,1516644405.912 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:06:45.921Z,1516644405.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:45.958Z,1516644405.958 [Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:06:46.018Z,1516644406.018 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Derivation="Tethys/Derivation"
       xmlns:Science="Tethys/Science"
       xmlns:Sensor="Tethys/Sensor"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Derivation http://okeanids.mbari.org/tethys/Xml/Derivation.xsd
                           Tethys/Science http://okeanids.mbari.org/tethys/Xml/Science.xsd
                           Tethys/Sensor http://okeanids.mbari.org/tethys/Xml/Sensor.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Science">

    <DefineArg Name="SampleISUS"><Description>
        Set either this or PeakDetectNO3Active to True in order to sample
        Nitrate. EnabledISUS must also be true.
    </Description><False/></DefineArg>

    <DefineArg Name="SampleISUSmaxPitch"><Description>
        Maximum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>60.0</Value></DefineArg>

    <DefineArg Name="SampleISUSminPitch"><Description>
        Minimum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>-60.0</Value></DefineArg>

    <DefineArg Name="PeakDetectChlActive"><Description>
        Turns on peak detection of Cholorphyll.
    </Description><False/></DefineArg>

    <DefineArg Name="HighestChlPeakReportActive"><Description>
        Turns on reporting of the highest peak value on yo-yo profiles in a
        horizontal sliding window (of length numProfilesSlidingwindow)
    </Description><False/></DefineArg>

    <DefineArg Name="PatchTracking"><Description>
        If tracking a patch
    </Description><False/></DefineArg>

    <DefineArg Name="FilterWidthHorizontal"><Description>
        Width of boxcar filter applied to yoyo-wise chl peaks to pick out the
        highest peak.
    </Description><Units:count/><Value>3</Value></DefineArg>

    <DefineArg Name="NumProfilesSlidingwindow"><Description>
        Length of horizontal sliding window. The highest yoyo-wise chl peak
        (after low-pass filtering by a filter of length FilterWidthHorizontal)
        within this window.
    </Description><Units:count/><Value>100</Value></DefineArg>

    <DefineArg Name="PeakDetectNO3Active"><Description>
        Turns on peak detection of Nitrate (and turns on ISUS).
    </Description><False/></DefineArg>

    <DefineArg Name="PeakDetectOilActive"><Description>
        Turns on peak detection of Dissolved Oil.
    </Description><False/></DefineArg>

    <DefineArg Name="UpwardDerivativeOfTemperatureActive"><Description>
        Turns on seawater temperature derivative.
    </Description><False/></DefineArg>

    <DefineArg Name="EnabledAanderaaO2"><Description>
        Automatically set to True if the Aanderaa O2 sensor is installed. Set to
        false to disable reading Aandera O2.
    </Description><Science:Aanderaa_O2.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledNeilBrown"><Description>
        Automatically set to true if the Neil Brown CTD is enabled. Set to false
        to disable reading from the Neil Brown.
    </Description><Science:CTD_NeilBrown.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledSeabird"><Description>
        Automatically set to true if the CTD is enabled. Set to false to disable
        reading from the CTD.
    </Description><Science:CTD_Seabird.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledTurbulence_NPS"><Description>
        Automatically set to true if the NPS Turbulence sensor is enabled. Set
        to false to disable reading from the NPS Turbulence sensor.
    </Description><Science:Turbulence_NPS.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsBB2FL"><Description>
        Automatically set to true if the the WetLabs BB2FL is enabled. Set to
        false to disable the WetLabs BB2FL.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsSeaOWL_UV_A"><Description>
        Automatically set to true if the the WetLabs SeaOWL UV-A is enabled. Set
        to false to disable the WetLabs SeaOWL UV-A.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledISUS"><Description>
        Automatically set to True if ISUS is enabled. Set to false to disable
        ISUS.
    </Description><Science:ISUS.loadAtStartup/></DefineArg>

<!--
    <DefineArg Name="EnabledSeeStar"><Description>
        Automatically set to True if SeeStar/SCPI is enabled. Set false to
        override.
    </Description><Sensor:SCPI.loadAtStartup/></DefineArg>

    <DefineArg Name="SeeStarTimeout"><Description>
        Timeout to trigger/read trigger for SeeStar camera.
    </Description><Sensor:SCPI.sampleTime/></DefineArg>

    <DefineArg Name="SeeStarTriggerDepth"><Description>
        Trigger the camera above this depth.
    </Description><Units:meter/><Value>40.0</Value></DefineArg>
-->

    <DefineArg Name="LowPassWindowLength"><Description>
        Low-pass window length (based on depth sensor sampling interval 0.4
        second) for low-pass filtering.
    </Description><Units:count/><Value>20</Value></DefineArg>

    <DefineArg Name="PeakChlShallowBound"><Description>
        Shallow depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineArg Name="PeakChlDeepBound"><Description>
        Deep depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineOutput Name="PeakChl"><Units:microgram_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlTemperature"><Units:celsius/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3"><Units:micromole_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Depth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Latitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Longitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChl"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlDistance"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOil"><Units:kilogram_per_cubic_meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOilLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <Parallel/>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledAanderaaO2"/>
        </While>
        <Universal:mass_concentration_of_oxygen_in_sea_water/>
    </ReadData>

    <ReadData>
        <While>
            <Arg Name="EnabledISUS"/>
            <And><Universal:platform_pitch_angle/><Lt><Arg Name="SampleISUSmaxPitch"/></Lt><And><Universal:platform_pitch_angle/><Gt><Arg Name="SampleISUSminPitch"/></Gt><And><Arg Name="SampleISUS"/><Or><Arg Name="PeakDetectNO3Active"/></Or></And></And></And>
        </While>
        <Universal:mole_concentration_of_nitrate_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
        </While>
        <Universal:sea_water_temperature/>
        <Universal:sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledSeabird"/>
        </While>
        <Science:CTD_Seabird.sea_water_temperature/>
        <Science:CTD_Seabird.sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
            <And><Arg Name="UpwardDerivativeOfTemperatureActive"/></And>
        </While>
        <Universal:upward_derivative_of_sea_water_temperature/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledTurbulence_NPS"/>
        </While>
        <Science:Turbulence_NPS.MicroCond/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsBB2FL"/>
            <Or><Arg Name="PeakDetectChlActive"/></Or>
        </While>
        <Universal:mass_concentration_of_chlorophyll_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsSeaOWL_UV_A"/>
            <Or><Arg Name="PeakDetectOilActive"/></Or>
        </While>
        <Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/>
    </ReadData>

    <Aggregate  Id="PeakDetectChl">

        <While>
            <Arg Name="PeakDetectChlActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_chlorophyll_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.shallowBound/><Arg Name="PeakChlShallowBound"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.deepBound/><Arg Name="PeakChlDeepBound"/></Setting>
            <OutputArg Name="PeakChl"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakChlDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakChlTemperature"><Trigger:PeakDetectVsDepth.peakTemperature/></OutputArg>
            <OutputArg Name="PeakChlLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakChlLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakChl"/><Arg Name="PeakChlDepth"/>
        </SendData>

    </Aggregate>

    <Aggregate Id="HighestChlPeakReport">

        <While>
            <Arg Name="HighestChlPeakReportActive"/>
        </While>

        <Trigger:PeakDetectHorizontal>
            <Sequence/>
            <Setting><Trigger:PeakDetectHorizontal.detectFrom/><Arg Name="PeakChl"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.depthFrom/><Arg Name="PeakChlDepth"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.latitudeFrom/><Arg Name="PeakChlLatitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.longitudeFrom/><Arg Name="PeakChlLongitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.patchTracking/><Arg Name="PatchTracking"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.filterWidth/><Arg Name="FilterWidthHorizontal"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.numProfilesSlidingwindow/><Arg Name="NumProfilesSlidingwindow"/></Setting>
            <OutputArg Name="PatchChl"><Trigger:PeakDetectHorizontal.peakDetect/></OutputArg>
            <OutputArg Name="PatchChlDepth"><Trigger:PeakDetectHorizontal.peakDepth/></OutputArg>
            <OutputArg Name="PatchChlLatitude"><Trigger:PeakDetectHorizontal.peakLatitude/></OutputArg>
            <OutputArg Name="PatchChlLongitude"><Trigger:PeakDetectHorizontal.peakLongitude/></OutputArg>
            <OutputArg Name="PatchChlDistance"><Trigger:PeakDetectHorizontal.peakDistance/></OutputArg>
        </Trigger:PeakDetectHorizontal>

    </Aggregate>

    <Aggregate Id="PeakDetectNO3">

        <While>
            <Arg Name="PeakDetectNO3Active"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mole_concentration_of_nitrate_in_sea_water/></Setting>
            <OutputArg Name="PeakNO3"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakNO3Depth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakNO3Latitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakNO3Longitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakNO3"/><Arg Name="PeakNO3Depth"/>
        </SendData>

    </Aggregate>

    <Aggregate  Id="PeakDetectOil">

        <While>
            <Arg Name="PeakDetectOilActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <OutputArg Name="PeakOil"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakOilDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakOilLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakOilLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakOil"/><Arg Name="PeakOilDepth"/>
        </SendData>

    </Aggregate>

<!--
    <Aggregate Id="RollSeeStar">

        <Description>
            Turn on the SeeStar/SCPI camera.
        </Description>

        <When>
            <Arg Name="EnabledSeeStar"/>
            <And><Universal:depth/><Lt><Arg Name="SeeStarTriggerDepth"/></Lt></And>
        </When>

        <ReadDatum Id="TriggerSeeStar">
            <Timeout Duration="SeeStarTimeout"/>
            <Sensor:SCPI.sampleSCPI/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Arg Name="SeeStarTimeout"/></Setting>
        </Guidance:Wait>

    </Aggregate>
-->

</Aggregate>


2018-01-22T18:06:46.021Z,1516644406.021 [CommandLine](IMPORTANT): Running ./Missions/Insert/Science.xml
2018-01-22T18:06:46.295Z,1516644406.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:46.308Z,1516644406.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:46.701Z,1516644406.701 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:46.706Z,1516644406.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:47.087Z,1516644407.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:47.092Z,1516644407.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:47.487Z,1516644407.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:47.496Z,1516644407.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:47.892Z,1516644407.892 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:47.897Z,1516644407.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:48.293Z,1516644408.293 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:48.298Z,1516644408.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:48.675Z,1516644408.675 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:48.704Z,1516644408.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:49.074Z,1516644409.074 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:49.079Z,1516644409.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:49.475Z,1516644409.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:49.480Z,1516644409.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:49.879Z,1516644409.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:49.884Z,1516644409.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:50.289Z,1516644410.289 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:50.294Z,1516644410.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:50.695Z,1516644410.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:50.724Z,1516644410.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:51.095Z,1516644411.095 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:51.100Z,1516644411.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:51.541Z,1516644411.541 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:51.556Z,1516644411.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:51.888Z,1516644411.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:51.892Z,1516644411.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:52.284Z,1516644412.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:52.289Z,1516644412.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:52.681Z,1516644412.681 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:52.686Z,1516644412.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:53.091Z,1516644413.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:53.096Z,1516644413.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:53.535Z,1516644413.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:53.548Z,1516644413.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:53.888Z,1516644413.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:53.893Z,1516644413.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:54.289Z,1516644414.289 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:54.293Z,1516644414.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:54.689Z,1516644414.689 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:54.694Z,1516644414.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:55.088Z,1516644415.088 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:55.093Z,1516644415.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:55.505Z,1516644415.505 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:55.510Z,1516644415.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:55.894Z,1516644415.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:55.899Z,1516644415.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:56.300Z,1516644416.300 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:56.305Z,1516644416.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:56.703Z,1516644416.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:56.708Z,1516644416.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:57.077Z,1516644417.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:57.106Z,1516644417.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:57.480Z,1516644417.480 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:57.485Z,1516644417.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:57.878Z,1516644417.878 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:57.883Z,1516644417.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:58.287Z,1516644418.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:58.292Z,1516644418.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:58.680Z,1516644418.680 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:58.685Z,1516644418.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:59.088Z,1516644419.088 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:59.093Z,1516644419.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:59.487Z,1516644419.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:59.496Z,1516644419.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:06:59.893Z,1516644419.893 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:06:59.898Z,1516644419.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:00.276Z,1516644420.276 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:00.289Z,1516644420.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:00.699Z,1516644420.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:00.708Z,1516644420.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:01.091Z,1516644421.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:01.100Z,1516644421.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:01.496Z,1516644421.496 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:01.501Z,1516644421.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:01.901Z,1516644421.901 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:01.911Z,1516644421.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:01.948Z,1516644421.948 [SBIT](IMPORTANT): Beginning Startup BIT
2018-01-22T18:07:01.956Z,1516644421.956 [CBIT](IMPORTANT): Beginning ground fault scan
2018-01-22T18:07:02.296Z,1516644422.296 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:02.305Z,1516644422.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:02.687Z,1516644422.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:02.692Z,1516644422.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:03.075Z,1516644423.075 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:03.096Z,1516644423.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:03.480Z,1516644423.480 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:03.485Z,1516644423.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:03.891Z,1516644423.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:03.896Z,1516644423.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:04.462Z,1516644424.462 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:04.493Z,1516644424.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:04.849Z,1516644424.849 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:04.854Z,1516644424.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:05.229Z,1516644425.229 [CommandLine](IMPORTANT): got command get CTD_Seabird.depth
2018-01-22T18:07:05.235Z,1516644425.235 [CommandLine](IMPORTANT): CTD_Seabird.depth nan m
2018-01-22T18:07:05.264Z,1516644425.264 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:05.289Z,1516644425.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:05.672Z,1516644425.672 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:05.677Z,1516644425.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:06.069Z,1516644426.069 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:06.074Z,1516644426.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:06.483Z,1516644426.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:06.512Z,1516644426.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:06.875Z,1516644426.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:06.880Z,1516644426.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:07.252Z,1516644427.252 [CommandLine](IMPORTANT): got command configSet list
2018-01-22T18:07:07.253Z,1516644427.253 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-01-22T18:07:07.253Z,1516644427.253 [CommandLine](IMPORTANT): Depth_Keller.loadAtStartup=0 bool;

2018-01-22T18:07:07.262Z,1516644427.262 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:07.272Z,1516644427.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:07.666Z,1516644427.666 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:07.671Z,1516644427.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:08.065Z,1516644428.065 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:08.070Z,1516644428.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:08.456Z,1516644428.456 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:08.461Z,1516644428.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:08.872Z,1516644428.872 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:08.877Z,1516644428.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:09.263Z,1516644429.263 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:09.271Z,1516644429.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:09.655Z,1516644429.655 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:09.660Z,1516644429.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:10.059Z,1516644430.059 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:10.064Z,1516644430.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:10.456Z,1516644430.456 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:10.461Z,1516644430.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:10.871Z,1516644430.871 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:10.876Z,1516644430.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:11.272Z,1516644431.272 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:11.277Z,1516644431.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:11.671Z,1516644431.671 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:11.676Z,1516644431.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:12.083Z,1516644432.083 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:12.088Z,1516644432.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:12.465Z,1516644432.465 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:12.471Z,1516644432.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:12.868Z,1516644432.868 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:12.873Z,1516644432.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:12.975Z,1516644432.975 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.004927
CHAN A1 (24V): -0.008997
CHAN A2 (12V): -0.000011
CHAN A3 (5V): -0.001731
CHAN B0 (3.3V): -0.001092
CHAN B1 (3.15aV): -0.001425
CHAN B2 (3.15bV): -0.000879
CHAN B3 (GND): -0.000644
OPEN: 0.003890
Full Scale Calc: 4.765 mA, -1.589 mA
2018-01-22T18:07:13.262Z,1516644433.262 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:13.267Z,1516644433.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:13.660Z,1516644433.660 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:13.665Z,1516644433.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:14.043Z,1516644434.043 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:14.056Z,1516644434.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:14.447Z,1516644434.447 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:14.473Z,1516644434.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:14.847Z,1516644434.847 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:14.854Z,1516644434.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:15.244Z,1516644435.244 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:15.249Z,1516644435.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:15.650Z,1516644435.650 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:15.655Z,1516644435.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:16.064Z,1516644436.064 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:16.089Z,1516644436.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:16.460Z,1516644436.460 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:16.465Z,1516644436.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:16.871Z,1516644436.871 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:16.900Z,1516644436.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:17.489Z,1516644437.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:17.494Z,1516644437.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:17.863Z,1516644437.863 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:17.868Z,1516644437.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:18.263Z,1516644438.263 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:18.268Z,1516644438.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:18.658Z,1516644438.658 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:18.663Z,1516644438.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:19.063Z,1516644439.063 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:19.068Z,1516644439.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:19.463Z,1516644439.463 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:19.468Z,1516644439.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:19.876Z,1516644439.876 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:19.881Z,1516644439.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:20.268Z,1516644440.268 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:20.273Z,1516644440.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:20.675Z,1516644440.675 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:20.680Z,1516644440.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:21.080Z,1516644441.080 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:21.085Z,1516644441.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:21.476Z,1516644441.476 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:21.482Z,1516644441.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:21.647Z,1516644441.647 [CommandLine](IMPORTANT): got command show stack
2018-01-22T18:07:21.647Z,1516644441.647 [CommandLine](IMPORTANT): Behavior Stack:

2018-01-22T18:07:21.648Z,1516644441.648 [MissionManager](IMPORTANT): Mission loaded, but not running.
2018-01-22T18:07:21.878Z,1516644441.878 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:21.883Z,1516644441.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:22.285Z,1516644442.285 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:22.290Z,1516644442.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:22.659Z,1516644442.659 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:22.692Z,1516644442.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:23.076Z,1516644443.076 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:23.081Z,1516644443.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:23.478Z,1516644443.478 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:23.499Z,1516644443.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:23.755Z,1516644443.755 [CommandLine](IMPORTANT): got command stop
2018-01-22T18:07:23.755Z,1516644443.755 [CommandLine](IMPORTANT): Scheduling is paused
2018-01-22T18:07:23.756Z,1516644443.756 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-22T18:07:23.869Z,1516644443.869 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:23.875Z,1516644443.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:24.267Z,1516644444.267 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:24.272Z,1516644444.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:24.665Z,1516644444.665 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:24.671Z,1516644444.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:25.072Z,1516644445.072 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:25.077Z,1516644445.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:25.470Z,1516644445.470 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:25.476Z,1516644445.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:25.875Z,1516644445.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:25.880Z,1516644445.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:26.283Z,1516644446.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:26.288Z,1516644446.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:26.679Z,1516644446.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:26.696Z,1516644446.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:27.076Z,1516644447.076 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:27.081Z,1516644447.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:27.475Z,1516644447.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:27.480Z,1516644447.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:27.863Z,1516644447.863 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:27.868Z,1516644447.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:28.275Z,1516644448.275 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:28.280Z,1516644448.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:28.668Z,1516644448.668 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:28.673Z,1516644448.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:29.065Z,1516644449.065 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:29.070Z,1516644449.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:29.475Z,1516644449.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:29.480Z,1516644449.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:29.872Z,1516644449.872 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:29.877Z,1516644449.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:30.271Z,1516644450.271 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:30.288Z,1516644450.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:30.678Z,1516644450.678 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:30.683Z,1516644450.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:31.076Z,1516644451.076 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:31.081Z,1516644451.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:31.491Z,1516644451.491 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:31.496Z,1516644451.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:31.879Z,1516644451.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:31.888Z,1516644451.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:32.283Z,1516644452.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:32.288Z,1516644452.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:32.678Z,1516644452.678 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:32.683Z,1516644452.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:33.063Z,1516644453.063 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:33.096Z,1516644453.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:33.463Z,1516644453.463 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:33.495Z,1516644453.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:33.882Z,1516644453.882 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:33.887Z,1516644453.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:34.284Z,1516644454.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:34.289Z,1516644454.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:34.663Z,1516644454.663 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:34.668Z,1516644454.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:35.071Z,1516644455.071 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:35.100Z,1516644455.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:35.462Z,1516644455.462 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:35.467Z,1516644455.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:35.875Z,1516644455.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:35.880Z,1516644455.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:36.267Z,1516644456.267 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:36.271Z,1516644456.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:36.676Z,1516644456.676 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:36.681Z,1516644456.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:37.171Z,1516644457.171 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:37.242Z,1516644457.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:37.479Z,1516644457.479 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:37.484Z,1516644457.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:37.879Z,1516644457.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:37.888Z,1516644457.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:38.273Z,1516644458.273 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:38.278Z,1516644458.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:38.671Z,1516644458.671 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:38.688Z,1516644458.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:39.059Z,1516644459.059 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:39.093Z,1516644459.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:39.476Z,1516644459.476 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:39.481Z,1516644459.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:39.875Z,1516644459.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:39.892Z,1516644459.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:40.263Z,1516644460.263 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:40.296Z,1516644460.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:40.663Z,1516644460.663 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:40.668Z,1516644460.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:41.067Z,1516644461.067 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:41.072Z,1516644461.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:41.463Z,1516644461.463 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:41.468Z,1516644461.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:41.875Z,1516644461.875 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:41.904Z,1516644461.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:42.272Z,1516644462.272 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:42.277Z,1516644462.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:42.676Z,1516644462.676 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:42.681Z,1516644462.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:43.069Z,1516644463.069 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:43.074Z,1516644463.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:43.469Z,1516644463.469 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:43.474Z,1516644463.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:43.871Z,1516644463.871 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:43.876Z,1516644463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:44.418Z,1516644464.418 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:44.423Z,1516644464.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:44.809Z,1516644464.809 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:44.814Z,1516644464.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:45.206Z,1516644465.206 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:45.211Z,1516644465.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:45.607Z,1516644465.607 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:45.616Z,1516644465.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:45.998Z,1516644465.998 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:46.011Z,1516644466.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:46.405Z,1516644466.405 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:46.409Z,1516644466.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:46.815Z,1516644466.815 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:46.820Z,1516644466.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:47.214Z,1516644467.214 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:47.219Z,1516644467.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:47.661Z,1516644467.661 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:47.670Z,1516644467.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:48.007Z,1516644468.007 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:48.012Z,1516644468.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:48.402Z,1516644468.402 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:48.407Z,1516644468.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:48.809Z,1516644468.809 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:48.814Z,1516644468.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:49.205Z,1516644469.205 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:49.210Z,1516644469.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:49.637Z,1516644469.637 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:49.650Z,1516644469.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:50.011Z,1516644470.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:50.024Z,1516644470.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:50.413Z,1516644470.413 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:50.417Z,1516644470.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:50.813Z,1516644470.813 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:50.818Z,1516644470.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:51.228Z,1516644471.228 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:51.240Z,1516644471.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:51.598Z,1516644471.598 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:51.603Z,1516644471.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:52.015Z,1516644472.015 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:52.020Z,1516644472.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:52.415Z,1516644472.415 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:52.420Z,1516644472.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:52.811Z,1516644472.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:52.816Z,1516644472.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:53.286Z,1516644473.286 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:53.291Z,1516644473.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:53.603Z,1516644473.603 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:53.608Z,1516644473.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:54.007Z,1516644474.007 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:54.011Z,1516644474.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:54.403Z,1516644474.403 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:54.407Z,1516644474.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:54.809Z,1516644474.809 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:54.813Z,1516644474.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:55.198Z,1516644475.198 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:55.233Z,1516644475.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:55.601Z,1516644475.601 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:55.606Z,1516644475.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:55.615Z,1516644475.615 [SBIT](IMPORTANT): SBIT PASSED
2018-01-22T18:07:56.011Z,1516644476.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:56.016Z,1516644476.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:56.019Z,1516644476.019 [MissionManager](IMPORTANT): Started mission Startup
2018-01-22T18:07:56.019Z,1516644476.019 [Startup] Running Loop=1
2018-01-22T18:07:56.019Z,1516644476.019 [Startup](DEBUG): Aggregate::initialize Startup
2018-01-22T18:07:56.019Z,1516644476.019 [Startup:A.GoToSurface] Running Loop=1
2018-01-22T18:07:56.019Z,1516644476.019 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-22T18:07:56.020Z,1516644476.020 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-22T18:07:56.020Z,1516644476.020 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-22T18:07:56.021Z,1516644476.021 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-22T18:07:56.021Z,1516644476.021 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-22T18:07:56.021Z,1516644476.021 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-22T18:07:56.407Z,1516644476.407 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:56.420Z,1516644476.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:56.812Z,1516644476.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:56.817Z,1516644476.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:57.271Z,1516644477.271 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:57.288Z,1516644477.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:57.608Z,1516644477.608 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:57.613Z,1516644477.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:58.151Z,1516644478.151 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:58.156Z,1516644478.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:58.567Z,1516644478.567 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:58.590Z,1516644478.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:58.955Z,1516644478.955 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:58.960Z,1516644478.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:59.359Z,1516644479.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x65351 got:0x6593
2018-01-22T18:07:59.383Z,1516644479.383 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:59.388Z,1516644479.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:07:59.740Z,1516644479.740 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:07:59.745Z,1516644479.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:00.139Z,1516644480.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:00.151Z,1516644480.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:00.540Z,1516644480.540 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:00.545Z,1516644480.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:00.943Z,1516644480.943 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:00.948Z,1516644480.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:01.344Z,1516644481.344 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:01.349Z,1516644481.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:01.752Z,1516644481.752 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:01.757Z,1516644481.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:02.156Z,1516644482.156 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:02.161Z,1516644482.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:02.548Z,1516644482.548 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:02.553Z,1516644482.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:02.950Z,1516644482.950 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:02.955Z,1516644482.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:03.352Z,1516644483.352 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:03.359Z,1516644483.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:03.739Z,1516644483.739 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:03.768Z,1516644483.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:04.141Z,1516644484.141 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:04.150Z,1516644484.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:04.536Z,1516644484.536 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:04.541Z,1516644484.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:04.943Z,1516644484.943 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:04.949Z,1516644484.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:05.335Z,1516644485.335 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:05.343Z,1516644485.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:05.732Z,1516644485.732 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:05.741Z,1516644485.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:06.137Z,1516644486.137 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:06.142Z,1516644486.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:06.547Z,1516644486.547 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:06.556Z,1516644486.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:06.930Z,1516644486.930 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:06.935Z,1516644486.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:07.345Z,1516644487.345 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:07.350Z,1516644487.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:07.745Z,1516644487.745 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:07.754Z,1516644487.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:08.163Z,1516644488.163 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:08.168Z,1516644488.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:08.544Z,1516644488.544 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:08.555Z,1516644488.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:08.927Z,1516644488.927 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:08.948Z,1516644488.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:09.328Z,1516644489.328 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:09.362Z,1516644489.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:09.731Z,1516644489.731 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:09.768Z,1516644489.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:10.131Z,1516644490.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:10.136Z,1516644490.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:10.527Z,1516644490.527 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:10.532Z,1516644490.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:10.942Z,1516644490.942 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:10.947Z,1516644490.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:11.347Z,1516644491.347 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:11.352Z,1516644491.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:11.730Z,1516644491.730 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:11.735Z,1516644491.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:12.138Z,1516644492.138 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:12.150Z,1516644492.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:12.547Z,1516644492.547 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:12.556Z,1516644492.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:12.959Z,1516644492.959 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:12.987Z,1516644492.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:13.384Z,1516644493.384 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:13.392Z,1516644493.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:13.753Z,1516644493.753 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:13.757Z,1516644493.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:14.140Z,1516644494.140 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:14.146Z,1516644494.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:14.533Z,1516644494.533 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:14.538Z,1516644494.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:14.939Z,1516644494.939 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:14.944Z,1516644494.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:15.329Z,1516644495.329 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:15.335Z,1516644495.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:15.729Z,1516644495.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:15.736Z,1516644495.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:16.139Z,1516644496.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:16.143Z,1516644496.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:16.522Z,1516644496.522 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:16.545Z,1516644496.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:16.847Z,1516644496.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:16.926Z,1516644496.926 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:16.960Z,1516644496.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:17.344Z,1516644497.344 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:17.355Z,1516644497.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:17.643Z,1516644497.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:17.749Z,1516644497.749 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:17.755Z,1516644497.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:18.047Z,1516644498.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:18.148Z,1516644498.148 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:18.153Z,1516644498.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:18.554Z,1516644498.554 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:18.562Z,1516644498.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:18.933Z,1516644498.933 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:18.952Z,1516644498.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:19.351Z,1516644499.351 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:19.356Z,1516644499.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:19.735Z,1516644499.735 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:19.744Z,1516644499.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:20.131Z,1516644500.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:20.136Z,1516644500.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:20.529Z,1516644500.529 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:20.534Z,1516644500.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:20.925Z,1516644500.925 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:20.939Z,1516644500.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:21.351Z,1516644501.351 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:21.359Z,1516644501.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:21.729Z,1516644501.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:21.735Z,1516644501.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:22.139Z,1516644502.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:22.144Z,1516644502.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:22.535Z,1516644502.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:22.540Z,1516644502.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:22.942Z,1516644502.942 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:22.947Z,1516644502.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:23.352Z,1516644503.352 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:23.360Z,1516644503.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:23.745Z,1516644503.745 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:23.757Z,1516644503.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:24.155Z,1516644504.155 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:24.160Z,1516644504.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:24.527Z,1516644504.527 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:24.532Z,1516644504.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:24.927Z,1516644504.927 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:24.932Z,1516644504.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:25.341Z,1516644505.341 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:25.371Z,1516644505.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:25.728Z,1516644505.728 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:25.733Z,1516644505.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:26.131Z,1516644506.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:26.136Z,1516644506.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:26.539Z,1516644506.539 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:26.552Z,1516644506.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:26.943Z,1516644506.943 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:26.948Z,1516644506.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:27.377Z,1516644507.377 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:27.401Z,1516644507.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:27.726Z,1516644507.726 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:27.731Z,1516644507.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:28.137Z,1516644508.137 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:28.154Z,1516644508.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:28.537Z,1516644508.537 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:28.542Z,1516644508.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:28.941Z,1516644508.941 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:28.946Z,1516644508.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:29.335Z,1516644509.335 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:29.340Z,1516644509.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:29.728Z,1516644509.728 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:29.733Z,1516644509.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:30.128Z,1516644510.128 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:30.133Z,1516644510.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:30.537Z,1516644510.537 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:30.542Z,1516644510.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:30.851Z,1516644510.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:30.929Z,1516644510.929 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:30.935Z,1516644510.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:31.336Z,1516644511.336 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:31.341Z,1516644511.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:31.649Z,1516644511.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:31.741Z,1516644511.741 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:31.746Z,1516644511.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:32.059Z,1516644512.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:32.140Z,1516644512.140 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:32.145Z,1516644512.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:32.540Z,1516644512.540 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:32.544Z,1516644512.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:32.856Z,1516644512.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:32.946Z,1516644512.946 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:32.951Z,1516644512.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:33.351Z,1516644513.351 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:33.356Z,1516644513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:33.652Z,1516644513.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:33.740Z,1516644513.740 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:33.745Z,1516644513.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:34.055Z,1516644514.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:34.145Z,1516644514.145 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:34.150Z,1516644514.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:34.533Z,1516644514.533 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:34.537Z,1516644514.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:34.931Z,1516644514.931 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:34.936Z,1516644514.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:35.379Z,1516644515.379 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:35.385Z,1516644515.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:35.729Z,1516644515.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:35.738Z,1516644515.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:36.135Z,1516644516.135 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:36.140Z,1516644516.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:36.539Z,1516644516.539 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:36.544Z,1516644516.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:36.935Z,1516644516.935 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:36.940Z,1516644516.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:37.349Z,1516644517.349 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:37.358Z,1516644517.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:37.739Z,1516644517.739 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:37.748Z,1516644517.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:38.122Z,1516644518.122 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:38.151Z,1516644518.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:38.568Z,1516644518.568 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:38.573Z,1516644518.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:38.944Z,1516644518.944 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:38.948Z,1516644518.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:39.369Z,1516644519.369 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:39.378Z,1516644519.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:39.742Z,1516644519.742 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:39.747Z,1516644519.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:40.148Z,1516644520.148 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:40.153Z,1516644520.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:40.546Z,1516644520.546 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:40.551Z,1516644520.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:40.934Z,1516644520.934 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:40.956Z,1516644520.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:41.395Z,1516644521.395 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:41.408Z,1516644521.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:41.739Z,1516644521.739 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:41.744Z,1516644521.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:42.129Z,1516644522.129 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:42.134Z,1516644522.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:42.539Z,1516644522.539 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:42.544Z,1516644522.544 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:42.544Z,1516644522.544 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-01-22T18:08:42.544Z,1516644522.544 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:08:42.545Z,1516644522.545 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:42.546Z,1516644522.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-01-22T18:08:42.546Z,1516644522.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:08:42.548Z,1516644522.548 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:42.548Z,1516644522.548 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-01-22T18:08:42.548Z,1516644522.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:08:42.575Z,1516644522.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:08:42.576Z,1516644522.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:08:42.576Z,1516644522.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:08:42.929Z,1516644522.929 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:42.944Z,1516644522.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:08:42.944Z,1516644522.944 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-01-22T18:08:42.944Z,1516644522.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:08:42.944Z,1516644522.944 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-01-22T18:08:42.945Z,1516644522.945 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:08:42.945Z,1516644522.945 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-01-22T18:08:43.329Z,1516644523.329 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:43.333Z,1516644523.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:08:43.334Z,1516644523.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:08:43.334Z,1516644523.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:08:43.334Z,1516644523.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:08:43.335Z,1516644523.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:08:43.335Z,1516644523.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:08:43.336Z,1516644523.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:08:43.336Z,1516644523.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:08:43.336Z,1516644523.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:08:43.745Z,1516644523.745 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:43.749Z,1516644523.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:44.154Z,1516644524.154 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:44.159Z,1516644524.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:44.553Z,1516644524.553 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:44.558Z,1516644524.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:44.871Z,1516644524.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:45.669Z,1516644525.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:46.103Z,1516644526.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:46.899Z,1516644526.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:47.695Z,1516644527.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:47.897Z,1516644527.897 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:47.902Z,1516644527.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:48.037Z,1516644528.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:48.042Z,1516644528.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:48.099Z,1516644528.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:48.367Z,1516644528.367 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:48.372Z,1516644528.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:48.739Z,1516644528.739 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.010293
2018-01-22T18:08:48.791Z,1516644528.791 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:48.800Z,1516644528.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:49.165Z,1516644529.165 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:49.170Z,1516644529.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:49.567Z,1516644529.567 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:49.572Z,1516644529.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:49.971Z,1516644529.971 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:49.980Z,1516644529.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:50.363Z,1516644530.363 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:50.369Z,1516644530.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:50.767Z,1516644530.767 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:50.776Z,1516644530.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:51.166Z,1516644531.166 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:51.171Z,1516644531.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:51.561Z,1516644531.561 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:51.567Z,1516644531.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:51.967Z,1516644531.967 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:51.976Z,1516644531.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:52.372Z,1516644532.372 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:52.377Z,1516644532.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:52.767Z,1516644532.767 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:52.773Z,1516644532.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:53.167Z,1516644533.167 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:53.172Z,1516644533.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:53.570Z,1516644533.570 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:53.575Z,1516644533.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:53.984Z,1516644533.984 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:54.001Z,1516644534.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:54.379Z,1516644534.379 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:54.384Z,1516644534.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:54.782Z,1516644534.782 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:54.787Z,1516644534.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:55.181Z,1516644535.181 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:55.186Z,1516644535.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:55.417Z,1516644535.417 [CommandLine](IMPORTANT): got command run ./Missions/Insert/Science.xml
2018-01-22T18:08:55.417Z,1516644535.417 [MissionManager](INFO): Uninitializing Mission Science
2018-01-22T18:08:55.428Z,1516644535.428 [MissionManager](INFO): Loading Mission: ./Missions/Insert/Science.xml
2018-01-22T18:08:55.563Z,1516644535.563 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:55.576Z,1516644535.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:55.718Z,1516644535.718 [MissionManager](INFO): DefineArg Science.SampleISUS = 0 bool
2018-01-22T18:08:55.720Z,1516644535.720 [MissionManager](INFO): DefineArg Science.SampleISUSmaxPitch = 60.000000 arcdeg
2018-01-22T18:08:55.723Z,1516644535.723 [MissionManager](INFO): DefineArg Science.SampleISUSminPitch = -60.000000 arcdeg
2018-01-22T18:08:55.724Z,1516644535.724 [MissionManager](INFO): DefineArg Science.PeakDetectChlActive = 0 bool
2018-01-22T18:08:55.726Z,1516644535.726 [MissionManager](INFO): DefineArg Science.HighestChlPeakReportActive = 0 bool
2018-01-22T18:08:55.728Z,1516644535.728 [MissionManager](INFO): DefineArg Science.PatchTracking = 0 bool
2018-01-22T18:08:55.730Z,1516644535.730 [MissionManager](INFO): DefineArg Science.FilterWidthHorizontal = 3.000000 count
2018-01-22T18:08:55.733Z,1516644535.733 [MissionManager](INFO): DefineArg Science.NumProfilesSlidingwindow = 100.000000 count
2018-01-22T18:08:55.771Z,1516644535.771 [MissionManager](INFO): DefineArg Science.PeakDetectNO3Active = 0 bool
2018-01-22T18:08:55.772Z,1516644535.772 [MissionManager](INFO): DefineArg Science.PeakDetectOilActive = 0 bool
2018-01-22T18:08:55.774Z,1516644535.774 [MissionManager](INFO): DefineArg Science.UpwardDerivativeOfTemperatureActive = 0 bool
2018-01-22T18:08:55.777Z,1516644535.777 [MissionManager](INFO): DefineArg Science.EnabledAanderaaO2 = 1.000000 bool
2018-01-22T18:08:55.780Z,1516644535.780 [MissionManager](INFO): DefineArg Science.EnabledNeilBrown = 0.000000 bool
2018-01-22T18:08:55.791Z,1516644535.791 [MissionManager](INFO): DefineArg Science.EnabledSeabird = 1.000000 bool
2018-01-22T18:08:55.795Z,1516644535.795 [MissionManager](INFO): DefineArg Science.EnabledTurbulence_NPS = 0.000000 bool
2018-01-22T18:08:55.801Z,1516644535.801 [MissionManager](INFO): DefineArg Science.EnabledWetLabsBB2FL = 1.000000 bool
2018-01-22T18:08:55.809Z,1516644535.809 [MissionManager](INFO): DefineArg Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool
2018-01-22T18:08:55.816Z,1516644535.816 [MissionManager](INFO): DefineArg Science.EnabledISUS = 0.000000 bool
2018-01-22T18:08:55.818Z,1516644535.818 [MissionManager](INFO): DefineArg Science.LowPassWindowLength = 20.000000 count
2018-01-22T18:08:55.824Z,1516644535.824 [MissionManager](INFO): DefineArg Science.PeakChlShallowBound = nan m
2018-01-22T18:08:55.826Z,1516644535.826 [MissionManager](INFO): DefineArg Science.PeakChlDeepBound = nan m
2018-01-22T18:08:55.832Z,1516644535.832 [MissionManager](INFO): DefineOutput Science.PeakChl = 0.000000 ug/l
2018-01-22T18:08:55.839Z,1516644535.839 [MissionManager](INFO): DefineOutput Science.PeakChlDepth = 0.000000 m
2018-01-22T18:08:55.841Z,1516644535.841 [MissionManager](INFO): DefineOutput Science.PeakChlTemperature = 0.000000 degC
2018-01-22T18:08:55.844Z,1516644535.844 [MissionManager](INFO): DefineOutput Science.PeakChlLatitude = nan arcdeg
2018-01-22T18:08:55.846Z,1516644535.846 [MissionManager](INFO): DefineOutput Science.PeakChlLongitude = nan arcdeg
2018-01-22T18:08:55.872Z,1516644535.872 [MissionManager](INFO): DefineOutput Science.PeakNO3 = 0.000000 umol/l
2018-01-22T18:08:55.883Z,1516644535.883 [MissionManager](INFO): DefineOutput Science.PeakNO3Depth = 0.000000 m
2018-01-22T18:08:55.885Z,1516644535.885 [MissionManager](INFO): DefineOutput Science.PeakNO3Latitude = nan arcdeg
2018-01-22T18:08:55.893Z,1516644535.893 [MissionManager](INFO): DefineOutput Science.PeakNO3Longitude = nan arcdeg
2018-01-22T18:08:55.908Z,1516644535.908 [MissionManager](INFO): DefineOutput Science.PatchChl = 0.000000 m
2018-01-22T18:08:55.910Z,1516644535.910 [MissionManager](INFO): DefineOutput Science.PatchChlDepth = 0.000000 m
2018-01-22T18:08:55.916Z,1516644535.916 [MissionManager](INFO): DefineOutput Science.PatchChlLatitude = nan arcdeg
2018-01-22T18:08:55.932Z,1516644535.932 [MissionManager](INFO): DefineOutput Science.PatchChlLongitude = nan arcdeg
2018-01-22T18:08:55.964Z,1516644535.964 [MissionManager](INFO): DefineOutput Science.PatchChlDistance = nan arcdeg
2018-01-22T18:08:55.966Z,1516644535.966 [MissionManager](INFO): DefineOutput Science.PeakOil = 0.000000 kg/m3
2018-01-22T18:08:55.972Z,1516644535.972 [MissionManager](INFO): DefineOutput Science.PeakOilDepth = 0.000000 m
2018-01-22T18:08:55.979Z,1516644535.979 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:55.983Z,1516644535.983 [MissionManager](INFO): DefineOutput Science.PeakOilLatitude = nan arcdeg
2018-01-22T18:08:55.985Z,1516644535.985 [MissionManager](INFO): DefineOutput Science.PeakOilLongitude = nan arcdeg
2018-01-22T18:08:55.992Z,1516644535.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:56.036Z,1516644536.036 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:08:56.046Z,1516644536.046 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2018-01-22T18:08:56.057Z,1516644536.057 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:08:56.064Z,1516644536.064 [Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:08:56.359Z,1516644536.359 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:56.364Z,1516644536.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:56.751Z,1516644536.751 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:56.755Z,1516644536.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:56.907Z,1516644536.907 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Derivation="Tethys/Derivation"
       xmlns:Science="Tethys/Science"
       xmlns:Sensor="Tethys/Sensor"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Derivation http://okeanids.mbari.org/tethys/Xml/Derivation.xsd
                           Tethys/Science http://okeanids.mbari.org/tethys/Xml/Science.xsd
                           Tethys/Sensor http://okeanids.mbari.org/tethys/Xml/Sensor.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Science">

    <DefineArg Name="SampleISUS"><Description>
        Set either this or PeakDetectNO3Active to True in order to sample
        Nitrate. EnabledISUS must also be true.
    </Description><False/></DefineArg>

    <DefineArg Name="SampleISUSmaxPitch"><Description>
        Maximum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>60.0</Value></DefineArg>

    <DefineArg Name="SampleISUSminPitch"><Description>
        Minimum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>-60.0</Value></DefineArg>

    <DefineArg Name="PeakDetectChlActive"><Description>
        Turns on peak detection of Cholorphyll.
    </Description><False/></DefineArg>

    <DefineArg Name="HighestChlPeakReportActive"><Description>
        Turns on reporting of the highest peak value on yo-yo profiles in a
        horizontal sliding window (of length numProfilesSlidingwindow)
    </Description><False/></DefineArg>

    <DefineArg Name="PatchTracking"><Description>
        If tracking a patch
    </Description><False/></DefineArg>

    <DefineArg Name="FilterWidthHorizontal"><Description>
        Width of boxcar filter applied to yoyo-wise chl peaks to pick out the
        highest peak.
    </Description><Units:count/><Value>3</Value></DefineArg>

    <DefineArg Name="NumProfilesSlidingwindow"><Description>
        Length of horizontal sliding window. The highest yoyo-wise chl peak
        (after low-pass filtering by a filter of length FilterWidthHorizontal)
        within this window.
    </Description><Units:count/><Value>100</Value></DefineArg>

    <DefineArg Name="PeakDetectNO3Active"><Description>
        Turns on peak detection of Nitrate (and turns on ISUS).
    </Description><False/></DefineArg>

    <DefineArg Name="PeakDetectOilActive"><Description>
        Turns on peak detection of Dissolved Oil.
    </Description><False/></DefineArg>

    <DefineArg Name="UpwardDerivativeOfTemperatureActive"><Description>
        Turns on seawater temperature derivative.
    </Description><False/></DefineArg>

    <DefineArg Name="EnabledAanderaaO2"><Description>
        Automatically set to True if the Aanderaa O2 sensor is installed. Set to
        false to disable reading Aandera O2.
    </Description><Science:Aanderaa_O2.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledNeilBrown"><Description>
        Automatically set to true if the Neil Brown CTD is enabled. Set to false
        to disable reading from the Neil Brown.
    </Description><Science:CTD_NeilBrown.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledSeabird"><Description>
        Automatically set to true if the CTD is enabled. Set to false to disable
        reading from the CTD.
    </Description><Science:CTD_Seabird.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledTurbulence_NPS"><Description>
        Automatically set to true if the NPS Turbulence sensor is enabled. Set
        to false to disable reading from the NPS Turbulence sensor.
    </Description><Science:Turbulence_NPS.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsBB2FL"><Description>
        Automatically set to true if the the WetLabs BB2FL is enabled. Set to
        false to disable the WetLabs BB2FL.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsSeaOWL_UV_A"><Description>
        Automatically set to true if the the WetLabs SeaOWL UV-A is enabled. Set
        to false to disable the WetLabs SeaOWL UV-A.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledISUS"><Description>
        Automatically set to True if ISUS is enabled. Set to false to disable
        ISUS.
    </Description><Science:ISUS.loadAtStartup/></DefineArg>

<!--
    <DefineArg Name="EnabledSeeStar"><Description>
        Automatically set to True if SeeStar/SCPI is enabled. Set false to
        override.
    </Description><Sensor:SCPI.loadAtStartup/></DefineArg>

    <DefineArg Name="SeeStarTimeout"><Description>
        Timeout to trigger/read trigger for SeeStar camera.
    </Description><Sensor:SCPI.sampleTime/></DefineArg>

    <DefineArg Name="SeeStarTriggerDepth"><Description>
        Trigger the camera above this depth.
    </Description><Units:meter/><Value>40.0</Value></DefineArg>
-->

    <DefineArg Name="LowPassWindowLength"><Description>
        Low-pass window length (based on depth sensor sampling interval 0.4
        second) for low-pass filtering.
    </Description><Units:count/><Value>20</Value></DefineArg>

    <DefineArg Name="PeakChlShallowBound"><Description>
        Shallow depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineArg Name="PeakChlDeepBound"><Description>
        Deep depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineOutput Name="PeakChl"><Units:microgram_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlTemperature"><Units:celsius/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3"><Units:micromole_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Depth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Latitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Longitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChl"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlDistance"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOil"><Units:kilogram_per_cubic_meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOilLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <Parallel/>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledAanderaaO2"/>
        </While>
        <Universal:mass_concentration_of_oxygen_in_sea_water/>
    </ReadData>

    <ReadData>
        <While>
            <Arg Name="EnabledISUS"/>
            <And><Universal:platform_pitch_angle/><Lt><Arg Name="SampleISUSmaxPitch"/></Lt><And><Universal:platform_pitch_angle/><Gt><Arg Name="SampleISUSminPitch"/></Gt><And><Arg Name="SampleISUS"/><Or><Arg Name="PeakDetectNO3Active"/></Or></And></And></And>
        </While>
        <Universal:mole_concentration_of_nitrate_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
        </While>
        <Universal:sea_water_temperature/>
        <Universal:sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledSeabird"/>
        </While>
        <Science:CTD_Seabird.sea_water_temperature/>
        <Science:CTD_Seabird.sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
            <And><Arg Name="UpwardDerivativeOfTemperatureActive"/></And>
        </While>
        <Universal:upward_derivative_of_sea_water_temperature/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledTurbulence_NPS"/>
        </While>
        <Science:Turbulence_NPS.MicroCond/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsBB2FL"/>
            <Or><Arg Name="PeakDetectChlActive"/></Or>
        </While>
        <Universal:mass_concentration_of_chlorophyll_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsSeaOWL_UV_A"/>
            <Or><Arg Name="PeakDetectOilActive"/></Or>
        </While>
        <Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/>
    </ReadData>

    <Aggregate  Id="PeakDetectChl">

        <While>
            <Arg Name="PeakDetectChlActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_chlorophyll_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.shallowBound/><Arg Name="PeakChlShallowBound"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.deepBound/><Arg Name="PeakChlDeepBound"/></Setting>
            <OutputArg Name="PeakChl"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakChlDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakChlTemperature"><Trigger:PeakDetectVsDepth.peakTemperature/></OutputArg>
            <OutputArg Name="PeakChlLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakChlLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakChl"/><Arg Name="PeakChlDepth"/>
        </SendData>

    </Aggregate>

    <Aggregate Id="HighestChlPeakReport">

        <While>
            <Arg Name="HighestChlPeakReportActive"/>
        </While>

        <Trigger:PeakDetectHorizontal>
            <Sequence/>
            <Setting><Trigger:PeakDetectHorizontal.detectFrom/><Arg Name="PeakChl"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.depthFrom/><Arg Name="PeakChlDepth"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.latitudeFrom/><Arg Name="PeakChlLatitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.longitudeFrom/><Arg Name="PeakChlLongitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.patchTracking/><Arg Name="PatchTracking"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.filterWidth/><Arg Name="FilterWidthHorizontal"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.numProfilesSlidingwindow/><Arg Name="NumProfilesSlidingwindow"/></Setting>
            <OutputArg Name="PatchChl"><Trigger:PeakDetectHorizontal.peakDetect/></OutputArg>
            <OutputArg Name="PatchChlDepth"><Trigger:PeakDetectHorizontal.peakDepth/></OutputArg>
            <OutputArg Name="PatchChlLatitude"><Trigger:PeakDetectHorizontal.peakLatitude/></OutputArg>
            <OutputArg Name="PatchChlLongitude"><Trigger:PeakDetectHorizontal.peakLongitude/></OutputArg>
            <OutputArg Name="PatchChlDistance"><Trigger:PeakDetectHorizontal.peakDistance/></OutputArg>
        </Trigger:PeakDetectHorizontal>

    </Aggregate>

    <Aggregate Id="PeakDetectNO3">

        <While>
            <Arg Name="PeakDetectNO3Active"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mole_concentration_of_nitrate_in_sea_water/></Setting>
            <OutputArg Name="PeakNO3"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakNO3Depth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakNO3Latitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakNO3Longitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakNO3"/><Arg Name="PeakNO3Depth"/>
        </SendData>

    </Aggregate>

    <Aggregate  Id="PeakDetectOil">

        <While>
            <Arg Name="PeakDetectOilActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <OutputArg Name="PeakOil"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakOilDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakOilLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakOilLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakOil"/><Arg Name="PeakOilDepth"/>
        </SendData>

    </Aggregate>

<!--
    <Aggregate Id="RollSeeStar">

        <Description>
            Turn on the SeeStar/SCPI camera.
        </Description>

        <When>
            <Arg Name="EnabledSeeStar"/>
            <And><Universal:depth/><Lt><Arg Name="SeeStarTriggerDepth"/></Lt></And>
        </When>

        <ReadDatum Id="TriggerSeeStar">
            <Timeout Duration="SeeStarTimeout"/>
            <Sensor:SCPI.sampleSCPI/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Arg Name="SeeStarTimeout"/></Setting>
        </Guidance:Wait>

    </Aggregate>
-->

</Aggregate>


2018-01-22T18:08:56.927Z,1516644536.927 [CommandLine](IMPORTANT): Running ./Missions/Insert/Science.xml
2018-01-22T18:08:57.172Z,1516644537.172 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:57.177Z,1516644537.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:57.611Z,1516644537.611 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:57.616Z,1516644537.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:58.010Z,1516644538.010 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:58.015Z,1516644538.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:58.401Z,1516644538.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:58.406Z,1516644538.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:58.797Z,1516644538.797 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:58.806Z,1516644538.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:58.916Z,1516644538.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:08:59.214Z,1516644539.214 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:59.219Z,1516644539.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:59.612Z,1516644539.612 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:08:59.616Z,1516644539.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:08:59.712Z,1516644539.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:00.023Z,1516644540.023 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:00.049Z,1516644540.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:00.123Z,1516644540.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:00.409Z,1516644540.409 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:00.414Z,1516644540.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:00.804Z,1516644540.804 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:00.809Z,1516644540.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:00.919Z,1516644540.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:01.207Z,1516644541.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:01.216Z,1516644541.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:01.607Z,1516644541.607 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:01.612Z,1516644541.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:01.715Z,1516644541.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:02.005Z,1516644542.005 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:02.010Z,1516644542.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:02.119Z,1516644542.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:02.401Z,1516644542.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:02.406Z,1516644542.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:02.804Z,1516644542.804 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:02.809Z,1516644542.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:03.213Z,1516644543.213 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:03.218Z,1516644543.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:03.602Z,1516644543.602 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:03.607Z,1516644543.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:04.011Z,1516644544.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:04.028Z,1516644544.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:04.416Z,1516644544.416 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:04.421Z,1516644544.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:04.812Z,1516644544.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:04.817Z,1516644544.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:05.217Z,1516644545.217 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:05.221Z,1516644545.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:05.612Z,1516644545.612 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:05.617Z,1516644545.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:06.003Z,1516644546.003 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:06.007Z,1516644546.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:06.401Z,1516644546.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:06.407Z,1516644546.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:06.811Z,1516644546.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:06.816Z,1516644546.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:07.207Z,1516644547.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:07.213Z,1516644547.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:07.601Z,1516644547.601 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:07.606Z,1516644547.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:08.009Z,1516644548.009 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:08.014Z,1516644548.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:08.401Z,1516644548.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:08.407Z,1516644548.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:08.810Z,1516644548.810 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:08.815Z,1516644548.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:09.210Z,1516644549.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:09.215Z,1516644549.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:09.619Z,1516644549.619 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:09.624Z,1516644549.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:10.017Z,1516644550.017 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:10.043Z,1516644550.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:10.415Z,1516644550.415 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:10.420Z,1516644550.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:10.812Z,1516644550.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:10.817Z,1516644550.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:11.201Z,1516644551.201 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:11.206Z,1516644551.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:11.610Z,1516644551.610 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:11.615Z,1516644551.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:12.020Z,1516644552.020 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:12.025Z,1516644552.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:12.399Z,1516644552.399 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:12.404Z,1516644552.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:12.799Z,1516644552.799 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:12.804Z,1516644552.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:12.931Z,1516644552.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:13.211Z,1516644553.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:13.241Z,1516644553.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:13.603Z,1516644553.603 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:13.608Z,1516644553.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:13.727Z,1516644553.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:13.997Z,1516644553.997 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:14.006Z,1516644554.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:14.139Z,1516644554.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:14.402Z,1516644554.402 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:14.407Z,1516644554.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:14.814Z,1516644554.814 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:14.819Z,1516644554.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:14.937Z,1516644554.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:15.215Z,1516644555.215 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:15.220Z,1516644555.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:15.623Z,1516644555.623 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:15.628Z,1516644555.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:15.731Z,1516644555.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:16.018Z,1516644556.018 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:16.023Z,1516644556.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:16.137Z,1516644556.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:09:16.411Z,1516644556.411 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:16.415Z,1516644556.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:16.802Z,1516644556.802 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:16.807Z,1516644556.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:17.202Z,1516644557.202 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:17.207Z,1516644557.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:17.610Z,1516644557.610 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:17.615Z,1516644557.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:18.002Z,1516644558.002 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:18.007Z,1516644558.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:18.402Z,1516644558.402 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:18.407Z,1516644558.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:18.810Z,1516644558.810 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:18.815Z,1516644558.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:19.202Z,1516644559.202 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:19.207Z,1516644559.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:19.608Z,1516644559.608 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:19.613Z,1516644559.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:20.023Z,1516644560.023 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:20.028Z,1516644560.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:20.412Z,1516644560.412 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:20.417Z,1516644560.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:20.815Z,1516644560.815 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:20.820Z,1516644560.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:21.212Z,1516644561.212 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:21.217Z,1516644561.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:21.602Z,1516644561.602 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:21.607Z,1516644561.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:22.002Z,1516644562.002 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:22.007Z,1516644562.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:22.411Z,1516644562.411 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:22.416Z,1516644562.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:22.802Z,1516644562.802 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:22.807Z,1516644562.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:23.201Z,1516644563.201 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:23.206Z,1516644563.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:23.604Z,1516644563.604 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:23.609Z,1516644563.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:24.002Z,1516644564.002 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:24.007Z,1516644564.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:24.401Z,1516644564.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:24.406Z,1516644564.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:24.811Z,1516644564.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:24.816Z,1516644564.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:25.216Z,1516644565.216 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:25.221Z,1516644565.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:25.612Z,1516644565.612 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:25.617Z,1516644565.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:26.021Z,1516644566.021 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:26.026Z,1516644566.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:26.415Z,1516644566.415 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:26.420Z,1516644566.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:26.802Z,1516644566.802 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:26.807Z,1516644566.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:27.207Z,1516644567.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:27.212Z,1516644567.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:27.603Z,1516644567.603 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:27.608Z,1516644567.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:28.011Z,1516644568.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:28.015Z,1516644568.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:28.415Z,1516644568.415 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:28.420Z,1516644568.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:28.813Z,1516644568.813 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:28.818Z,1516644568.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:29.210Z,1516644569.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:29.215Z,1516644569.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:29.619Z,1516644569.619 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:29.624Z,1516644569.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:30.023Z,1516644570.023 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:30.033Z,1516644570.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:30.416Z,1516644570.416 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:30.421Z,1516644570.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:30.813Z,1516644570.813 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:30.817Z,1516644570.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:31.216Z,1516644571.216 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:31.221Z,1516644571.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:31.612Z,1516644571.612 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:31.617Z,1516644571.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:32.015Z,1516644572.015 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:32.020Z,1516644572.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:32.412Z,1516644572.412 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:32.417Z,1516644572.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:32.812Z,1516644572.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:32.817Z,1516644572.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:33.196Z,1516644573.196 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:33.217Z,1516644573.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:33.600Z,1516644573.600 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:33.629Z,1516644573.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:33.999Z,1516644573.999 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:34.005Z,1516644574.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:34.399Z,1516644574.399 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:34.404Z,1516644574.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:34.803Z,1516644574.803 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:34.808Z,1516644574.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:35.203Z,1516644575.203 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:35.208Z,1516644575.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:35.615Z,1516644575.615 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:35.640Z,1516644575.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:36.016Z,1516644576.016 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:36.045Z,1516644576.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:36.408Z,1516644576.408 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:36.413Z,1516644576.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:36.807Z,1516644576.807 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:36.812Z,1516644576.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:37.203Z,1516644577.203 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:37.208Z,1516644577.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:37.606Z,1516644577.606 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:37.611Z,1516644577.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:38.003Z,1516644578.003 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:38.012Z,1516644578.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:38.401Z,1516644578.401 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:38.410Z,1516644578.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:38.800Z,1516644578.800 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:38.805Z,1516644578.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:39.207Z,1516644579.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:39.212Z,1516644579.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:39.611Z,1516644579.611 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:39.616Z,1516644579.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:40.015Z,1516644580.015 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:40.020Z,1516644580.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:40.414Z,1516644580.414 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:40.419Z,1516644580.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:40.815Z,1516644580.815 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:40.820Z,1516644580.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:41.211Z,1516644581.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:41.216Z,1516644581.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:41.616Z,1516644581.616 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:41.621Z,1516644581.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:42.011Z,1516644582.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:42.016Z,1516644582.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:42.411Z,1516644582.411 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:42.416Z,1516644582.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:42.814Z,1516644582.814 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:42.819Z,1516644582.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:43.211Z,1516644583.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:43.216Z,1516644583.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:43.615Z,1516644583.615 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:43.620Z,1516644583.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:44.011Z,1516644584.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:44.028Z,1516644584.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:44.409Z,1516644584.409 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:44.414Z,1516644584.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:44.806Z,1516644584.806 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:44.811Z,1516644584.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:48.173Z,1516644588.173 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:48.179Z,1516644588.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:48.311Z,1516644588.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:48.316Z,1516644588.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:48.663Z,1516644588.663 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:48.668Z,1516644588.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:49.054Z,1516644589.054 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:49.059Z,1516644589.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:49.476Z,1516644589.476 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:49.485Z,1516644589.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:49.839Z,1516644589.839 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:49.847Z,1516644589.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:50.234Z,1516644590.234 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:50.247Z,1516644590.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:50.641Z,1516644590.641 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:50.646Z,1516644590.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:51.037Z,1516644591.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:51.046Z,1516644591.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:51.508Z,1516644591.508 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:51.521Z,1516644591.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:51.839Z,1516644591.839 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:51.844Z,1516644591.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:52.234Z,1516644592.234 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:52.247Z,1516644592.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:52.642Z,1516644592.642 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:52.647Z,1516644592.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:53.049Z,1516644593.049 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:53.054Z,1516644593.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:53.447Z,1516644593.447 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:53.456Z,1516644593.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:53.861Z,1516644593.861 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:53.866Z,1516644593.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:54.255Z,1516644594.255 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:54.260Z,1516644594.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:54.649Z,1516644594.649 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:54.654Z,1516644594.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:55.055Z,1516644595.055 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:55.060Z,1516644595.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:55.431Z,1516644595.431 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:55.436Z,1516644595.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:55.839Z,1516644595.839 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:55.844Z,1516644595.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:56.243Z,1516644596.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:56.248Z,1516644596.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:56.637Z,1516644596.637 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:56.643Z,1516644596.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:57.039Z,1516644597.039 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:57.048Z,1516644597.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:57.485Z,1516644597.485 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:57.494Z,1516644597.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:57.837Z,1516644597.837 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:57.846Z,1516644597.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:58.256Z,1516644598.256 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:58.261Z,1516644598.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:58.648Z,1516644598.648 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:58.652Z,1516644598.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:59.052Z,1516644599.052 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:59.057Z,1516644599.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:59.480Z,1516644599.480 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:59.494Z,1516644599.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:09:59.851Z,1516644599.851 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:09:59.856Z,1516644599.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:00.231Z,1516644600.231 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:00.256Z,1516644600.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:00.631Z,1516644600.631 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:00.636Z,1516644600.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:01.031Z,1516644601.031 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:01.036Z,1516644601.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:01.477Z,1516644601.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:01.488Z,1516644601.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:01.835Z,1516644601.835 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:01.844Z,1516644601.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:02.236Z,1516644602.236 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:02.245Z,1516644602.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:02.643Z,1516644602.643 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:02.648Z,1516644602.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:03.048Z,1516644603.048 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:03.053Z,1516644603.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:03.499Z,1516644603.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:03.509Z,1516644603.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:03.857Z,1516644603.857 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:03.862Z,1516644603.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:04.256Z,1516644604.256 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:04.260Z,1516644604.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:04.653Z,1516644604.653 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:04.666Z,1516644604.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:05.046Z,1516644605.046 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:05.051Z,1516644605.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:05.444Z,1516644605.444 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:05.520Z,1516644605.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:05.838Z,1516644605.838 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:05.859Z,1516644605.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:06.235Z,1516644606.235 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:06.240Z,1516644606.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:06.635Z,1516644606.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:06.640Z,1516644606.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:07.035Z,1516644607.035 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:07.040Z,1516644607.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:07.438Z,1516644607.438 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:07.443Z,1516644607.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:07.874Z,1516644607.874 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:07.879Z,1516644607.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:08.239Z,1516644608.239 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:08.245Z,1516644608.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:08.648Z,1516644608.648 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:08.652Z,1516644608.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:09.040Z,1516644609.040 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:09.045Z,1516644609.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:09.451Z,1516644609.451 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:09.456Z,1516644609.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:09.857Z,1516644609.857 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:09.862Z,1516644609.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:10.236Z,1516644610.236 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:10.241Z,1516644610.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:10.649Z,1516644610.649 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:10.655Z,1516644610.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:11.042Z,1516644611.042 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:11.048Z,1516644611.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:11.490Z,1516644611.490 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:11.511Z,1516644611.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:11.835Z,1516644611.835 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:11.856Z,1516644611.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:12.233Z,1516644612.233 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:12.238Z,1516644612.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:12.635Z,1516644612.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:12.640Z,1516644612.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:13.033Z,1516644613.033 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:13.038Z,1516644613.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:13.494Z,1516644613.494 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:13.516Z,1516644613.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:13.847Z,1516644613.847 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:13.852Z,1516644613.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:14.244Z,1516644614.244 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:14.248Z,1516644614.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:14.651Z,1516644614.651 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:14.656Z,1516644614.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:15.051Z,1516644615.051 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:15.056Z,1516644615.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:15.488Z,1516644615.488 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:15.493Z,1516644615.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:15.837Z,1516644615.837 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:15.842Z,1516644615.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:16.240Z,1516644616.240 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:16.245Z,1516644616.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:16.635Z,1516644616.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:16.640Z,1516644616.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:17.054Z,1516644617.054 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:17.059Z,1516644617.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:17.480Z,1516644617.480 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:17.493Z,1516644617.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:17.836Z,1516644617.836 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:17.841Z,1516644617.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:18.236Z,1516644618.236 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:18.240Z,1516644618.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:18.639Z,1516644618.639 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:18.644Z,1516644618.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:19.070Z,1516644619.070 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:19.075Z,1516644619.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:19.449Z,1516644619.449 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:19.454Z,1516644619.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:19.867Z,1516644619.867 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:19.876Z,1516644619.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:20.249Z,1516644620.249 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:20.254Z,1516644620.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:20.638Z,1516644620.638 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:20.643Z,1516644620.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:21.047Z,1516644621.047 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:21.052Z,1516644621.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:21.446Z,1516644621.446 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:21.451Z,1516644621.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:21.860Z,1516644621.860 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:21.874Z,1516644621.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:22.243Z,1516644622.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:22.248Z,1516644622.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:22.651Z,1516644622.651 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:22.655Z,1516644622.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:23.048Z,1516644623.048 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:23.053Z,1516644623.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:23.448Z,1516644623.448 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:23.453Z,1516644623.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:23.870Z,1516644623.870 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:23.883Z,1516644623.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:24.244Z,1516644624.244 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:24.261Z,1516644624.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:24.640Z,1516644624.640 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:24.645Z,1516644624.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:25.044Z,1516644625.044 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:25.049Z,1516644625.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:25.503Z,1516644625.503 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:25.532Z,1516644625.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:25.836Z,1516644625.836 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:25.841Z,1516644625.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:26.247Z,1516644626.247 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:26.260Z,1516644626.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:26.638Z,1516644626.638 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:26.643Z,1516644626.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:27.048Z,1516644627.048 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:27.057Z,1516644627.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:27.473Z,1516644627.473 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:27.500Z,1516644627.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:27.830Z,1516644627.830 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:27.835Z,1516644627.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:28.235Z,1516644628.235 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:28.240Z,1516644628.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:28.635Z,1516644628.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:28.640Z,1516644628.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:29.035Z,1516644629.035 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:29.044Z,1516644629.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:29.501Z,1516644629.501 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:29.515Z,1516644629.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:29.848Z,1516644629.848 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:29.853Z,1516644629.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:30.253Z,1516644630.253 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:30.266Z,1516644630.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:30.651Z,1516644630.651 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:30.656Z,1516644630.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:31.051Z,1516644631.051 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:31.055Z,1516644631.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:31.468Z,1516644631.468 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:31.504Z,1516644631.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:31.839Z,1516644631.839 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:31.844Z,1516644631.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:32.235Z,1516644632.235 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:32.240Z,1516644632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:32.639Z,1516644632.639 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:32.644Z,1516644632.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:33.044Z,1516644633.044 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:33.049Z,1516644633.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:33.434Z,1516644633.434 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:33.443Z,1516644633.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:33.839Z,1516644633.839 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:33.844Z,1516644633.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:34.247Z,1516644634.247 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:34.252Z,1516644634.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:34.652Z,1516644634.652 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:34.657Z,1516644634.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:35.048Z,1516644635.048 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:35.053Z,1516644635.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:35.452Z,1516644635.452 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:35.457Z,1516644635.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:35.883Z,1516644635.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:35.892Z,1516644635.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:36.230Z,1516644636.230 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:36.235Z,1516644636.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:36.635Z,1516644636.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:36.640Z,1516644636.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:37.035Z,1516644637.035 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:37.040Z,1516644637.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:37.433Z,1516644637.433 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:37.438Z,1516644637.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:37.879Z,1516644637.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:37.888Z,1516644637.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:38.234Z,1516644638.234 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:38.247Z,1516644638.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:38.637Z,1516644638.637 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:38.642Z,1516644638.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:39.051Z,1516644639.051 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:39.068Z,1516644639.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:39.437Z,1516644639.437 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:39.442Z,1516644639.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:39.855Z,1516644639.855 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:39.860Z,1516644639.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:40.256Z,1516644640.256 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:40.261Z,1516644640.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:40.663Z,1516644640.663 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:40.668Z,1516644640.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:41.057Z,1516644641.057 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:41.062Z,1516644641.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:41.435Z,1516644641.435 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:41.520Z,1516644641.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:41.833Z,1516644641.833 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:41.842Z,1516644641.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:42.242Z,1516644642.242 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:42.247Z,1516644642.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:42.639Z,1516644642.639 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:42.644Z,1516644642.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:43.047Z,1516644643.047 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:43.052Z,1516644643.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:43.443Z,1516644643.443 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:43.455Z,1516644643.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:43.834Z,1516644643.834 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:43.847Z,1516644643.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:44.237Z,1516644644.237 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:44.251Z,1516644644.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:44.639Z,1516644644.639 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:44.644Z,1516644644.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:45.052Z,1516644645.052 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:45.057Z,1516644645.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:48.404Z,1516644648.404 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:48.413Z,1516644648.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:48.532Z,1516644648.532 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:48.537Z,1516644648.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:48.880Z,1516644648.880 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:48.885Z,1516644648.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:49.274Z,1516644649.274 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:49.283Z,1516644649.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:49.673Z,1516644649.673 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:49.686Z,1516644649.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:50.073Z,1516644650.073 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:50.078Z,1516644650.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:50.483Z,1516644650.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:50.488Z,1516644650.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:50.882Z,1516644650.882 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:50.887Z,1516644650.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:51.281Z,1516644651.281 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:51.285Z,1516644651.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:51.682Z,1516644651.682 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:51.687Z,1516644651.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:52.076Z,1516644652.076 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:52.081Z,1516644652.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:52.481Z,1516644652.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:52.486Z,1516644652.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:52.879Z,1516644652.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:52.888Z,1516644652.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:53.299Z,1516644653.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:53.304Z,1516644653.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:53.693Z,1516644653.693 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:53.698Z,1516644653.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:54.089Z,1516644654.089 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:54.098Z,1516644654.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:54.483Z,1516644654.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:54.488Z,1516644654.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:54.880Z,1516644654.880 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:54.885Z,1516644654.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:55.271Z,1516644655.271 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:55.276Z,1516644655.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:55.679Z,1516644655.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:55.708Z,1516644655.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:56.075Z,1516644656.075 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:56.080Z,1516644656.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:56.479Z,1516644656.479 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:56.484Z,1516644656.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:56.869Z,1516644656.869 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:56.883Z,1516644656.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:57.283Z,1516644657.283 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:57.288Z,1516644657.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:57.673Z,1516644657.673 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:57.678Z,1516644657.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:58.079Z,1516644658.079 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:58.088Z,1516644658.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:58.484Z,1516644658.484 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:10:58.484Z,1516644658.484 [BPC1] Communications Fault, FailCount= 1
2018-01-22T18:10:58.485Z,1516644658.485 [BPC1](ERROR): Communications Fault
2018-01-22T18:10:58.487Z,1516644658.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:58.493Z,1516644658.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:58.513Z,1516644658.513 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:10:58.884Z,1516644658.884 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:58.889Z,1516644658.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:59.287Z,1516644659.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:59.292Z,1516644659.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:59.683Z,1516644659.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:10:59.688Z,1516644659.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:10:59.700Z,1516644659.700 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:10:59.700Z,1516644659.700 [BPC1] No Fault, FailCount= 1
2018-01-22T18:11:00.131Z,1516644660.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:00.136Z,1516644660.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:00.469Z,1516644660.469 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:00.474Z,1516644660.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:00.873Z,1516644660.873 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:00.878Z,1516644660.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:01.284Z,1516644661.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:01.289Z,1516644661.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:01.673Z,1516644661.673 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:01.678Z,1516644661.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:02.074Z,1516644662.074 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:02.079Z,1516644662.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:02.483Z,1516644662.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:02.488Z,1516644662.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:02.879Z,1516644662.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:02.884Z,1516644662.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:03.273Z,1516644663.273 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:03.278Z,1516644663.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:03.688Z,1516644663.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:03.693Z,1516644663.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:04.091Z,1516644664.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:04.096Z,1516644664.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:04.487Z,1516644664.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:04.492Z,1516644664.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:04.891Z,1516644664.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:04.903Z,1516644664.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:05.279Z,1516644665.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:05.284Z,1516644665.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:05.679Z,1516644665.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:05.688Z,1516644665.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:06.087Z,1516644666.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:06.092Z,1516644666.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:06.481Z,1516644666.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:06.486Z,1516644666.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:06.879Z,1516644666.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:06.888Z,1516644666.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:07.287Z,1516644667.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:07.292Z,1516644667.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:07.685Z,1516644667.685 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:07.690Z,1516644667.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:08.081Z,1516644668.081 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:08.087Z,1516644668.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:08.486Z,1516644668.486 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:08.492Z,1516644668.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:08.894Z,1516644668.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:08.899Z,1516644668.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:09.291Z,1516644669.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:09.296Z,1516644669.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:09.695Z,1516644669.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:09.700Z,1516644669.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:10.084Z,1516644670.084 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:10.089Z,1516644670.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:10.483Z,1516644670.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:10.488Z,1516644670.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:10.890Z,1516644670.890 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:10.895Z,1516644670.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:11.284Z,1516644671.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:11.288Z,1516644671.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:11.681Z,1516644671.681 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:11.686Z,1516644671.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:12.090Z,1516644672.090 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:12.095Z,1516644672.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:12.484Z,1516644672.484 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:12.489Z,1516644672.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:12.881Z,1516644672.881 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:12.887Z,1516644672.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:13.286Z,1516644673.286 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:13.291Z,1516644673.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:13.683Z,1516644673.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:13.688Z,1516644673.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:14.096Z,1516644674.096 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:14.101Z,1516644674.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:14.496Z,1516644674.496 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:14.501Z,1516644674.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:14.887Z,1516644674.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:14.892Z,1516644674.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:15.307Z,1516644675.307 [BPC1](INFO): Initialized
2018-01-22T18:11:15.311Z,1516644675.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:15.316Z,1516644675.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:15.690Z,1516644675.690 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:15.695Z,1516644675.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:16.069Z,1516644676.069 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:16.074Z,1516644676.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:16.471Z,1516644676.471 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:16.476Z,1516644676.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:16.871Z,1516644676.871 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:16.876Z,1516644676.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:17.294Z,1516644677.294 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:17.299Z,1516644677.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:17.678Z,1516644677.678 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:17.683Z,1516644677.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:18.083Z,1516644678.083 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:18.096Z,1516644678.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:18.473Z,1516644678.473 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:18.478Z,1516644678.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:18.879Z,1516644678.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:18.888Z,1516644678.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:19.288Z,1516644679.288 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:19.293Z,1516644679.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:19.687Z,1516644679.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:19.692Z,1516644679.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:20.082Z,1516644680.082 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:20.087Z,1516644680.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:20.487Z,1516644680.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:20.491Z,1516644680.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:20.881Z,1516644680.881 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:20.886Z,1516644680.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:21.279Z,1516644681.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:21.283Z,1516644681.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:21.677Z,1516644681.677 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:21.682Z,1516644681.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:22.091Z,1516644682.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:22.096Z,1516644682.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:22.483Z,1516644682.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:22.488Z,1516644682.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:22.881Z,1516644682.881 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:22.886Z,1516644682.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:23.274Z,1516644683.274 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:23.279Z,1516644683.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:23.687Z,1516644683.687 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:23.692Z,1516644683.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:24.089Z,1516644684.089 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:24.094Z,1516644684.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:24.483Z,1516644684.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:24.488Z,1516644684.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:24.844Z,1516644684.844 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-01-22T18:11:24.887Z,1516644684.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:24.892Z,1516644684.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:25.284Z,1516644685.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:25.288Z,1516644685.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:25.691Z,1516644685.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:25.696Z,1516644685.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:26.087Z,1516644686.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:26.092Z,1516644686.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:26.491Z,1516644686.491 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:26.496Z,1516644686.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:26.891Z,1516644686.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:26.896Z,1516644686.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:27.270Z,1516644687.270 [PNI_TCM](ERROR): CRC does not match. Expected:0x2648 got:0x26941
2018-01-22T18:11:27.303Z,1516644687.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:27.324Z,1516644687.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:27.691Z,1516644687.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:27.696Z,1516644687.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:28.077Z,1516644688.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:28.081Z,1516644688.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:28.488Z,1516644688.488 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:28.497Z,1516644688.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:28.892Z,1516644688.892 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:28.897Z,1516644688.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:29.284Z,1516644689.284 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:29.289Z,1516644689.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:29.689Z,1516644689.689 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:29.698Z,1516644689.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:30.091Z,1516644690.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:30.100Z,1516644690.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:30.481Z,1516644690.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:30.486Z,1516644690.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:30.895Z,1516644690.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:30.900Z,1516644690.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:31.295Z,1516644691.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:31.300Z,1516644691.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:31.695Z,1516644691.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:31.699Z,1516644691.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:32.107Z,1516644692.107 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:32.112Z,1516644692.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:32.468Z,1516644692.468 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:32.485Z,1516644692.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:32.889Z,1516644692.889 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:32.893Z,1516644692.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:33.292Z,1516644693.292 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:33.297Z,1516644693.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:33.691Z,1516644693.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:33.696Z,1516644693.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:34.093Z,1516644694.093 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:34.098Z,1516644694.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:34.494Z,1516644694.494 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:34.499Z,1516644694.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:34.899Z,1516644694.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:34.908Z,1516644694.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:35.295Z,1516644695.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:35.304Z,1516644695.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:35.672Z,1516644695.672 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:35.677Z,1516644695.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:36.087Z,1516644696.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:36.096Z,1516644696.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:36.491Z,1516644696.491 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:36.496Z,1516644696.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:36.878Z,1516644696.878 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:36.884Z,1516644696.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:37.285Z,1516644697.285 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:37.291Z,1516644697.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:37.685Z,1516644697.685 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:37.689Z,1516644697.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:38.103Z,1516644698.103 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:38.108Z,1516644698.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:38.477Z,1516644698.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x19590 got:0x797
2018-01-22T18:11:38.512Z,1516644698.512 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:38.517Z,1516644698.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:38.877Z,1516644698.877 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:38.882Z,1516644698.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:39.277Z,1516644699.277 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:39.282Z,1516644699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:39.686Z,1516644699.686 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:39.693Z,1516644699.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:40.079Z,1516644700.079 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:40.085Z,1516644700.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:40.489Z,1516644700.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:40.494Z,1516644700.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:40.895Z,1516644700.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:40.900Z,1516644700.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:41.311Z,1516644701.311 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:41.316Z,1516644701.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:41.686Z,1516644701.686 [PNI_TCM](ERROR): CRC does not match. Expected:0x33179 got:0x42781
2018-01-22T18:11:41.707Z,1516644701.707 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:41.712Z,1516644701.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:42.087Z,1516644702.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:42.094Z,1516644702.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:42.473Z,1516644702.473 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:42.489Z,1516644702.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:42.895Z,1516644702.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:42.900Z,1516644702.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:43.303Z,1516644703.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:43.308Z,1516644703.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:43.719Z,1516644703.719 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:43.724Z,1516644703.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:43.724Z,1516644703.724 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-01-22T18:11:43.724Z,1516644703.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:11:43.726Z,1516644703.726 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:43.726Z,1516644703.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-01-22T18:11:43.726Z,1516644703.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:11:43.748Z,1516644703.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:43.748Z,1516644703.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-01-22T18:11:43.748Z,1516644703.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:11:43.776Z,1516644703.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:11:43.776Z,1516644703.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:11:43.777Z,1516644703.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:11:44.080Z,1516644704.080 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:44.127Z,1516644704.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:11:44.127Z,1516644704.127 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-01-22T18:11:44.127Z,1516644704.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:11:44.127Z,1516644704.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-01-22T18:11:44.128Z,1516644704.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:11:44.128Z,1516644704.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-01-22T18:11:44.484Z,1516644704.484 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:44.490Z,1516644704.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:11:44.519Z,1516644704.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:11:44.520Z,1516644704.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:11:44.520Z,1516644704.520 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:11:44.521Z,1516644704.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:11:44.521Z,1516644704.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:11:44.521Z,1516644704.521 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:11:44.522Z,1516644704.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:11:44.522Z,1516644704.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:11:44.873Z,1516644704.873 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:44.882Z,1516644704.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:45.281Z,1516644705.281 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:45.287Z,1516644705.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:48.588Z,1516644708.588 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:48.593Z,1516644708.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:48.724Z,1516644708.724 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:48.728Z,1516644708.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:49.092Z,1516644709.092 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:49.110Z,1516644709.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:49.493Z,1516644709.493 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:49.498Z,1516644709.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:49.897Z,1516644709.897 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:49.921Z,1516644709.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:50.287Z,1516644710.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:50.292Z,1516644710.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:50.683Z,1516644710.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:50.688Z,1516644710.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:51.087Z,1516644711.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:51.092Z,1516644711.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:51.499Z,1516644711.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:51.504Z,1516644711.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:51.899Z,1516644711.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:51.904Z,1516644711.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:52.290Z,1516644712.290 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:52.303Z,1516644712.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:52.685Z,1516644712.685 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:52.690Z,1516644712.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:53.091Z,1516644713.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:53.100Z,1516644713.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:53.475Z,1516644713.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:53.492Z,1516644713.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:53.898Z,1516644713.898 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:53.903Z,1516644713.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:54.299Z,1516644714.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:54.308Z,1516644714.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:54.698Z,1516644714.698 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:54.703Z,1516644714.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:55.100Z,1516644715.100 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:55.109Z,1516644715.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:55.477Z,1516644715.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:55.482Z,1516644715.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:55.883Z,1516644715.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:55.888Z,1516644715.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:56.277Z,1516644716.277 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:56.282Z,1516644716.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:56.682Z,1516644716.682 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:56.687Z,1516644716.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:57.077Z,1516644717.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:57.082Z,1516644717.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:57.484Z,1516644717.484 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:57.489Z,1516644717.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:57.888Z,1516644717.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:57.893Z,1516644717.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:58.287Z,1516644718.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:58.292Z,1516644718.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:58.688Z,1516644718.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:58.698Z,1516644718.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:59.087Z,1516644719.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:59.092Z,1516644719.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:59.483Z,1516644719.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:59.488Z,1516644719.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:11:59.884Z,1516644719.884 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:11:59.889Z,1516644719.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:00.303Z,1516644720.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:00.308Z,1516644720.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:00.692Z,1516644720.692 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:00.697Z,1516644720.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:01.100Z,1516644721.100 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:01.105Z,1516644721.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:01.490Z,1516644721.490 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:01.495Z,1516644721.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:01.888Z,1516644721.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:01.893Z,1516644721.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:02.291Z,1516644722.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:02.296Z,1516644722.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:02.694Z,1516644722.694 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:02.699Z,1516644722.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:03.074Z,1516644723.074 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:03.107Z,1516644723.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:03.495Z,1516644723.495 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:03.500Z,1516644723.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:03.897Z,1516644723.897 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:03.902Z,1516644723.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:04.299Z,1516644724.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:04.308Z,1516644724.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:04.679Z,1516644724.679 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:04.684Z,1516644724.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:05.080Z,1516644725.080 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:05.084Z,1516644725.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:05.483Z,1516644725.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:05.488Z,1516644725.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:05.885Z,1516644725.885 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:05.890Z,1516644725.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:06.291Z,1516644726.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:06.296Z,1516644726.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:06.688Z,1516644726.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:06.693Z,1516644726.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:07.084Z,1516644727.084 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:07.089Z,1516644727.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:07.477Z,1516644727.477 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:07.482Z,1516644727.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:07.880Z,1516644727.880 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:07.885Z,1516644727.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:08.279Z,1516644728.279 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:08.284Z,1516644728.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:08.677Z,1516644728.677 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:08.682Z,1516644728.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:09.077Z,1516644729.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:09.086Z,1516644729.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:09.495Z,1516644729.495 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:09.512Z,1516644729.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:09.894Z,1516644729.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:09.899Z,1516644729.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:10.289Z,1516644730.289 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:10.298Z,1516644730.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:10.681Z,1516644730.681 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:10.686Z,1516644730.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:11.086Z,1516644731.086 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:11.091Z,1516644731.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:11.483Z,1516644731.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:11.487Z,1516644731.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:11.888Z,1516644731.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:11.893Z,1516644731.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:12.307Z,1516644732.307 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:12.312Z,1516644732.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:12.695Z,1516644732.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:12.700Z,1516644732.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:13.095Z,1516644733.095 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:13.100Z,1516644733.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:13.490Z,1516644733.490 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:13.495Z,1516644733.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:13.887Z,1516644733.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:13.892Z,1516644733.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:14.292Z,1516644734.292 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:14.297Z,1516644734.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:14.703Z,1516644734.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:14.708Z,1516644734.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:15.092Z,1516644735.092 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:15.097Z,1516644735.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:15.492Z,1516644735.492 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:15.497Z,1516644735.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:15.894Z,1516644735.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:15.899Z,1516644735.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:16.303Z,1516644736.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:16.308Z,1516644736.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:16.692Z,1516644736.692 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:16.717Z,1516644736.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:17.091Z,1516644737.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:17.095Z,1516644737.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:17.489Z,1516644737.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:17.494Z,1516644737.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:17.887Z,1516644737.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:17.892Z,1516644737.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:18.295Z,1516644738.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:18.312Z,1516644738.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:18.695Z,1516644738.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:18.700Z,1516644738.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:19.089Z,1516644739.089 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:19.094Z,1516644739.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:19.482Z,1516644739.482 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:19.486Z,1516644739.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:19.887Z,1516644739.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:19.892Z,1516644739.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:20.295Z,1516644740.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:20.300Z,1516644740.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:20.695Z,1516644740.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:20.700Z,1516644740.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:21.094Z,1516644741.094 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:21.099Z,1516644741.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:21.486Z,1516644741.486 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:21.491Z,1516644741.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:21.894Z,1516644741.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:21.899Z,1516644741.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:22.289Z,1516644742.289 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:22.298Z,1516644742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:22.695Z,1516644742.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:22.700Z,1516644742.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:23.099Z,1516644743.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:23.104Z,1516644743.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:23.475Z,1516644743.475 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:23.500Z,1516644743.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:23.879Z,1516644743.879 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:23.908Z,1516644743.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:24.285Z,1516644744.285 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:24.302Z,1516644744.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:24.700Z,1516644744.700 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:24.705Z,1516644744.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:25.084Z,1516644745.084 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:25.089Z,1516644745.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:25.508Z,1516644745.508 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:25.513Z,1516644745.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:25.887Z,1516644745.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:25.892Z,1516644745.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:26.292Z,1516644746.292 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:26.297Z,1516644746.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:26.727Z,1516644746.727 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:26.732Z,1516644746.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:27.099Z,1516644747.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:27.108Z,1516644747.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:27.495Z,1516644747.495 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:27.504Z,1516644747.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:27.915Z,1516644747.915 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:27.920Z,1516644747.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:28.301Z,1516644748.301 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:28.310Z,1516644748.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:28.718Z,1516644748.718 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:28.724Z,1516644748.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:29.098Z,1516644749.098 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:29.131Z,1516644749.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:29.481Z,1516644749.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:29.486Z,1516644749.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:29.888Z,1516644749.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:29.893Z,1516644749.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:30.307Z,1516644750.307 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:30.346Z,1516644750.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:30.703Z,1516644750.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:30.737Z,1516644750.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:31.091Z,1516644751.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:31.104Z,1516644751.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:31.500Z,1516644751.500 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:31.504Z,1516644751.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:31.887Z,1516644751.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:31.896Z,1516644751.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:32.308Z,1516644752.308 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:32.317Z,1516644752.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:32.703Z,1516644752.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:32.716Z,1516644752.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:33.099Z,1516644753.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:33.112Z,1516644753.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:33.485Z,1516644753.485 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:33.489Z,1516644753.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:33.907Z,1516644753.907 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:33.912Z,1516644753.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:34.299Z,1516644754.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:34.304Z,1516644754.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:34.698Z,1516644754.698 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:34.707Z,1516644754.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:35.097Z,1516644755.097 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:35.114Z,1516644755.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:35.481Z,1516644755.481 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:35.525Z,1516644755.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:35.880Z,1516644755.880 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:35.889Z,1516644755.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:36.316Z,1516644756.316 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:36.325Z,1516644756.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:36.699Z,1516644756.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:36.708Z,1516644756.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:37.099Z,1516644757.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:37.108Z,1516644757.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:37.487Z,1516644757.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:37.504Z,1516644757.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:37.884Z,1516644757.884 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:37.889Z,1516644757.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:38.293Z,1516644758.293 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:38.302Z,1516644758.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:38.720Z,1516644758.720 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:38.726Z,1516644758.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:39.095Z,1516644759.095 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:39.100Z,1516644759.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:39.498Z,1516644759.498 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:39.503Z,1516644759.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:39.899Z,1516644759.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:39.904Z,1516644759.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:40.285Z,1516644760.285 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:40.309Z,1516644760.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:40.696Z,1516644760.696 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:40.701Z,1516644760.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:41.112Z,1516644761.112 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:41.130Z,1516644761.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:41.483Z,1516644761.483 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:41.512Z,1516644761.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:41.905Z,1516644761.905 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:41.910Z,1516644761.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:42.299Z,1516644762.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:42.304Z,1516644762.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:42.693Z,1516644762.693 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:42.698Z,1516644762.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:43.095Z,1516644763.095 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:43.100Z,1516644763.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:43.492Z,1516644763.492 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:43.496Z,1516644763.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:43.878Z,1516644763.878 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:43.883Z,1516644763.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:44.299Z,1516644764.299 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:44.304Z,1516644764.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:44.695Z,1516644764.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:44.700Z,1516644764.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:45.095Z,1516644765.095 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:45.100Z,1516644765.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:45.485Z,1516644765.485 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:45.490Z,1516644765.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:48.827Z,1516644768.827 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:48.832Z,1516644768.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:48.968Z,1516644768.968 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:48.973Z,1516644768.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:49.296Z,1516644769.296 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:49.301Z,1516644769.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:49.756Z,1516644769.756 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:49.792Z,1516644769.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:50.098Z,1516644770.098 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:50.103Z,1516644770.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:50.497Z,1516644770.497 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:50.502Z,1516644770.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:50.899Z,1516644770.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:50.903Z,1516644770.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:51.295Z,1516644771.295 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:51.300Z,1516644771.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:51.756Z,1516644771.756 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:51.762Z,1516644771.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:52.107Z,1516644772.107 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:52.116Z,1516644772.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:52.499Z,1516644772.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:52.516Z,1516644772.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:52.895Z,1516644772.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:52.912Z,1516644772.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:53.307Z,1516644773.307 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:53.312Z,1516644773.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:53.700Z,1516644773.700 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:53.768Z,1516644773.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:54.097Z,1516644774.097 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:54.102Z,1516644774.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:54.487Z,1516644774.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:54.516Z,1516644774.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:54.887Z,1516644774.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:54.892Z,1516644774.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:55.312Z,1516644775.312 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:55.317Z,1516644775.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:55.715Z,1516644775.715 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:55.720Z,1516644775.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:56.119Z,1516644776.119 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:56.124Z,1516644776.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:56.491Z,1516644776.491 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:56.496Z,1516644776.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:56.887Z,1516644776.887 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:56.892Z,1516644776.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:57.287Z,1516644777.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:57.292Z,1516644777.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:57.697Z,1516644777.697 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:57.702Z,1516644777.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:58.124Z,1516644778.124 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:58.129Z,1516644778.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:58.502Z,1516644778.502 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:58.531Z,1516644778.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:58.888Z,1516644778.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:58.893Z,1516644778.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:59.291Z,1516644779.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:59.296Z,1516644779.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:12:59.751Z,1516644779.751 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:12:59.756Z,1516644779.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:00.103Z,1516644780.103 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:00.108Z,1516644780.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:00.509Z,1516644780.509 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:00.514Z,1516644780.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:00.900Z,1516644780.900 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:00.905Z,1516644780.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:01.301Z,1516644781.301 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:01.311Z,1516644781.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:01.742Z,1516644781.742 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:01.762Z,1516644781.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:02.099Z,1516644782.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:02.108Z,1516644782.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:02.499Z,1516644782.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:02.504Z,1516644782.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:02.902Z,1516644782.902 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:02.907Z,1516644782.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:03.293Z,1516644783.293 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:03.298Z,1516644783.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:03.740Z,1516644783.740 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:03.753Z,1516644783.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:04.093Z,1516644784.093 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:04.098Z,1516644784.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:04.489Z,1516644784.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:04.494Z,1516644784.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:04.891Z,1516644784.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:04.896Z,1516644784.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:05.291Z,1516644785.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:05.296Z,1516644785.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:05.743Z,1516644785.743 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:05.748Z,1516644785.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:06.099Z,1516644786.099 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:06.108Z,1516644786.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:06.504Z,1516644786.504 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:06.509Z,1516644786.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:06.900Z,1516644786.900 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:06.905Z,1516644786.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:07.303Z,1516644787.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:07.308Z,1516644787.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:07.698Z,1516644787.698 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:07.703Z,1516644787.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:08.091Z,1516644788.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:08.100Z,1516644788.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:08.490Z,1516644788.490 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:08.495Z,1516644788.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:08.886Z,1516644788.886 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:08.899Z,1516644788.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:09.296Z,1516644789.296 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:09.301Z,1516644789.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:09.699Z,1516644789.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:09.704Z,1516644789.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:10.120Z,1516644790.120 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:10.125Z,1516644790.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:10.499Z,1516644790.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:10.504Z,1516644790.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:10.896Z,1516644790.896 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:10.901Z,1516644790.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:11.298Z,1516644791.298 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:11.303Z,1516644791.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:11.695Z,1516644791.695 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:11.708Z,1516644791.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:12.112Z,1516644792.112 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:12.121Z,1516644792.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:12.512Z,1516644792.512 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:12.517Z,1516644792.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:12.902Z,1516644792.902 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:12.907Z,1516644792.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:13.309Z,1516644793.309 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:13.314Z,1516644793.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:13.683Z,1516644793.683 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:13.735Z,1516644793.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:14.087Z,1516644794.087 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:14.092Z,1516644794.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:14.487Z,1516644794.487 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:14.492Z,1516644794.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:14.891Z,1516644794.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:14.896Z,1516644794.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:15.285Z,1516644795.285 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:15.290Z,1516644795.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:15.745Z,1516644795.745 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:15.775Z,1516644795.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:16.103Z,1516644796.103 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:16.132Z,1516644796.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:16.493Z,1516644796.493 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:16.498Z,1516644796.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:16.888Z,1516644796.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:16.892Z,1516644796.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:17.289Z,1516644797.289 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:17.294Z,1516644797.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:17.685Z,1516644797.685 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:17.741Z,1516644797.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:18.089Z,1516644798.089 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:18.094Z,1516644798.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:18.501Z,1516644798.501 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:18.510Z,1516644798.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:18.904Z,1516644798.904 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:18.909Z,1516644798.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:19.300Z,1516644799.300 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:19.305Z,1516644799.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:19.721Z,1516644799.721 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:19.758Z,1516644799.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:20.091Z,1516644800.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:20.100Z,1516644800.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:20.489Z,1516644800.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:20.498Z,1516644800.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:20.903Z,1516644800.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:20.908Z,1516644800.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:21.282Z,1516644801.282 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:21.303Z,1516644801.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:21.709Z,1516644801.709 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:21.714Z,1516644801.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:22.115Z,1516644802.115 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:22.125Z,1516644802.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:22.508Z,1516644802.508 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:22.513Z,1516644802.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:22.891Z,1516644802.891 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:22.896Z,1516644802.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:23.287Z,1516644803.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:23.292Z,1516644803.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:23.699Z,1516644803.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:23.704Z,1516644803.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:24.139Z,1516644804.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:24.148Z,1516644804.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:24.496Z,1516644804.496 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:24.501Z,1516644804.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:24.903Z,1516644804.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:24.908Z,1516644804.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:25.296Z,1516644805.296 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:25.300Z,1516644805.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:25.699Z,1516644805.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:25.715Z,1516644805.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:26.134Z,1516644806.134 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:26.147Z,1516644806.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:26.498Z,1516644806.498 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:26.504Z,1516644806.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:26.894Z,1516644806.894 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:26.899Z,1516644806.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:27.298Z,1516644807.298 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:27.303Z,1516644807.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:27.703Z,1516644807.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:27.749Z,1516644807.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:28.097Z,1516644808.097 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:28.101Z,1516644808.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:28.499Z,1516644808.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:28.504Z,1516644808.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:28.889Z,1516644808.889 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:28.894Z,1516644808.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:29.301Z,1516644809.301 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:29.305Z,1516644809.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:29.689Z,1516644809.689 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:29.694Z,1516644809.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:30.090Z,1516644810.090 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:30.095Z,1516644810.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:30.512Z,1516644810.512 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:30.517Z,1516644810.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:30.904Z,1516644810.904 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:30.909Z,1516644810.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:31.300Z,1516644811.300 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:31.305Z,1516644811.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:31.699Z,1516644811.699 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:31.704Z,1516644811.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:32.096Z,1516644812.096 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:32.101Z,1516644812.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:32.497Z,1516644812.497 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:32.502Z,1516644812.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:32.902Z,1516644812.902 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:32.907Z,1516644812.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:33.296Z,1516644813.296 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:33.301Z,1516644813.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:33.703Z,1516644813.703 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:33.708Z,1516644813.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:34.108Z,1516644814.108 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:34.113Z,1516644814.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:34.493Z,1516644814.493 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:34.506Z,1516644814.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:34.895Z,1516644814.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:34.926Z,1516644814.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:35.287Z,1516644815.287 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:35.291Z,1516644815.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:35.686Z,1516644815.686 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:35.691Z,1516644815.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:36.091Z,1516644816.091 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:36.096Z,1516644816.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:36.501Z,1516644816.501 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:36.506Z,1516644816.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:36.897Z,1516644816.897 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:36.902Z,1516644816.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:37.293Z,1516644817.293 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:37.298Z,1516644817.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:37.686Z,1516644817.686 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:37.699Z,1516644817.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:38.140Z,1516644818.140 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:38.145Z,1516644818.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:38.501Z,1516644818.501 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:38.506Z,1516644818.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:38.903Z,1516644818.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:38.908Z,1516644818.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:39.301Z,1516644819.301 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:39.305Z,1516644819.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:39.700Z,1516644819.700 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:39.706Z,1516644819.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:40.144Z,1516644820.144 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:40.156Z,1516644820.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:40.493Z,1516644820.493 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:40.498Z,1516644820.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:40.885Z,1516644820.885 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:40.890Z,1516644820.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:41.290Z,1516644821.290 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:41.294Z,1516644821.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:41.691Z,1516644821.691 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:41.696Z,1516644821.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:42.088Z,1516644822.088 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:42.093Z,1516644822.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:42.499Z,1516644822.499 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:42.508Z,1516644822.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:42.903Z,1516644822.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:42.908Z,1516644822.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:43.297Z,1516644823.297 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:43.302Z,1516644823.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:43.689Z,1516644823.689 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:43.698Z,1516644823.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:44.090Z,1516644824.090 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:44.095Z,1516644824.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:44.489Z,1516644824.489 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:44.494Z,1516644824.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:44.899Z,1516644824.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:44.904Z,1516644824.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:45.291Z,1516644825.291 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:45.296Z,1516644825.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:45.704Z,1516644825.704 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:45.709Z,1516644825.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:48.965Z,1516644828.965 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:48.970Z,1516644828.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:49.105Z,1516644829.105 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:49.123Z,1516644829.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:49.451Z,1516644829.451 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:49.456Z,1516644829.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:49.909Z,1516644829.909 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:49.927Z,1516644829.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:50.247Z,1516644830.247 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:50.252Z,1516644830.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:50.641Z,1516644830.641 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:50.646Z,1516644830.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:51.045Z,1516644831.045 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:51.059Z,1516644831.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:51.447Z,1516644831.447 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:51.452Z,1516644831.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:51.837Z,1516644831.837 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:51.842Z,1516644831.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:52.240Z,1516644832.240 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:52.245Z,1516644832.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:52.637Z,1516644832.637 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:52.642Z,1516644832.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:53.037Z,1516644833.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:53.042Z,1516644833.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:53.441Z,1516644833.441 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:53.446Z,1516644833.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:53.844Z,1516644833.844 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:53.848Z,1516644833.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:54.247Z,1516644834.247 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:54.252Z,1516644834.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:54.643Z,1516644834.643 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:54.647Z,1516644834.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:55.040Z,1516644835.040 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:55.045Z,1516644835.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:55.451Z,1516644835.451 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:55.456Z,1516644835.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:55.861Z,1516644835.861 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:55.866Z,1516644835.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:56.237Z,1516644836.237 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:56.245Z,1516644836.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:56.623Z,1516644836.623 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:56.648Z,1516644836.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:57.027Z,1516644837.027 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:57.048Z,1516644837.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:57.451Z,1516644837.451 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:57.456Z,1516644837.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:57.857Z,1516644837.857 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:57.866Z,1516644837.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:58.243Z,1516644838.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:58.248Z,1516644838.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:58.646Z,1516644838.646 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:58.651Z,1516644838.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:59.025Z,1516644839.025 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:59.030Z,1516644839.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:59.433Z,1516644839.433 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:59.438Z,1516644839.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:13:59.853Z,1516644839.853 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:13:59.867Z,1516644839.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:00.241Z,1516644840.241 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:00.269Z,1516644840.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:00.627Z,1516644840.627 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:00.632Z,1516644840.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:01.052Z,1516644841.052 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:01.057Z,1516644841.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:01.441Z,1516644841.441 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:01.465Z,1516644841.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:01.873Z,1516644841.873 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:01.882Z,1516644841.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:02.241Z,1516644842.241 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:02.245Z,1516644842.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:02.625Z,1516644842.625 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:02.634Z,1516644842.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:03.029Z,1516644843.029 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:03.035Z,1516644843.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:03.439Z,1516644843.439 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:03.444Z,1516644843.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:03.886Z,1516644843.886 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:03.899Z,1516644843.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:04.243Z,1516644844.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:04.252Z,1516644844.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:04.636Z,1516644844.636 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:04.641Z,1516644844.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:05.037Z,1516644845.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:05.042Z,1516644845.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:05.444Z,1516644845.444 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:05.449Z,1516644845.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:05.851Z,1516644845.851 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:05.856Z,1516644845.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:06.251Z,1516644846.251 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:06.256Z,1516644846.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:06.643Z,1516644846.643 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:06.648Z,1516644846.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:07.039Z,1516644847.039 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:07.044Z,1516644847.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:07.371Z,1516644847.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:07.436Z,1516644847.436 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:07.445Z,1516644847.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:07.845Z,1516644847.845 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:07.849Z,1516644847.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:08.169Z,1516644848.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:08.251Z,1516644848.251 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:08.256Z,1516644848.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:08.583Z,1516644848.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:08.642Z,1516644848.642 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:08.647Z,1516644848.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:09.042Z,1516644849.042 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:09.047Z,1516644849.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:09.451Z,1516644849.451 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:09.456Z,1516644849.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:09.868Z,1516644849.868 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:09.878Z,1516644849.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:10.243Z,1516644850.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:10.248Z,1516644850.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:10.631Z,1516644850.631 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:10.665Z,1516644850.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:11.031Z,1516644851.031 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:11.063Z,1516644851.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:11.448Z,1516644851.448 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:11.452Z,1516644851.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:11.871Z,1516644851.871 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:11.876Z,1516644851.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:12.245Z,1516644852.245 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:12.250Z,1516644852.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:12.631Z,1516644852.631 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:12.636Z,1516644852.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:13.037Z,1516644853.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:13.042Z,1516644853.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:13.437Z,1516644853.437 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:13.442Z,1516644853.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:13.901Z,1516644853.901 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:13.927Z,1516644853.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:14.241Z,1516644854.241 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:14.251Z,1516644854.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:14.642Z,1516644854.642 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:14.647Z,1516644854.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:15.039Z,1516644855.039 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:15.048Z,1516644855.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:15.448Z,1516644855.448 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:15.453Z,1516644855.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:15.877Z,1516644855.877 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:15.887Z,1516644855.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:16.237Z,1516644856.237 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:16.246Z,1516644856.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:16.624Z,1516644856.624 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:16.641Z,1516644856.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:17.024Z,1516644857.024 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:17.029Z,1516644857.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:17.447Z,1516644857.447 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:17.456Z,1516644857.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:17.888Z,1516644857.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:17.913Z,1516644857.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:18.247Z,1516644858.247 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:18.256Z,1516644858.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:18.634Z,1516644858.634 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:18.640Z,1516644858.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:19.041Z,1516644859.041 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:19.047Z,1516644859.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:19.441Z,1516644859.441 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:19.446Z,1516644859.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:19.845Z,1516644859.845 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:19.863Z,1516644859.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:20.251Z,1516644860.251 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:20.256Z,1516644860.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:20.635Z,1516644860.635 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:20.640Z,1516644860.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:21.038Z,1516644861.038 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:21.043Z,1516644861.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:21.403Z,1516644861.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:21.453Z,1516644861.453 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:21.457Z,1516644861.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:21.844Z,1516644861.844 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:21.849Z,1516644861.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:22.199Z,1516644862.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:22.256Z,1516644862.256 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:22.261Z,1516644862.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:22.612Z,1516644862.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:22.643Z,1516644862.643 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:22.647Z,1516644862.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:23.036Z,1516644863.036 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:23.041Z,1516644863.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:23.449Z,1516644863.449 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:23.454Z,1516644863.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:23.899Z,1516644863.899 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:23.907Z,1516644863.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:24.245Z,1516644864.245 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:24.258Z,1516644864.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:24.624Z,1516644864.624 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:24.640Z,1516644864.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:25.022Z,1516644865.022 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:25.027Z,1516644865.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:25.450Z,1516644865.450 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:25.455Z,1516644865.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:25.900Z,1516644865.900 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:25.925Z,1516644865.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:26.233Z,1516644866.233 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:26.250Z,1516644866.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:26.623Z,1516644866.623 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:26.628Z,1516644866.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:27.035Z,1516644867.035 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:27.068Z,1516644867.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:27.448Z,1516644867.448 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:27.453Z,1516644867.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:27.876Z,1516644867.876 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:27.881Z,1516644867.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:28.261Z,1516644868.261 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:28.270Z,1516644868.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:28.628Z,1516644868.628 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:28.632Z,1516644868.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:29.026Z,1516644869.026 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:29.031Z,1516644869.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:29.437Z,1516644869.437 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:29.442Z,1516644869.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:29.888Z,1516644869.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:29.917Z,1516644869.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:30.243Z,1516644870.243 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:30.256Z,1516644870.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:30.643Z,1516644870.643 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:30.648Z,1516644870.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:31.032Z,1516644871.032 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:31.037Z,1516644871.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:31.433Z,1516644871.433 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:31.438Z,1516644871.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:31.840Z,1516644871.840 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:31.845Z,1516644871.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:32.264Z,1516644872.264 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:32.269Z,1516644872.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:32.651Z,1516644872.651 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:32.656Z,1516644872.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:33.038Z,1516644873.038 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:33.044Z,1516644873.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:33.435Z,1516644873.435 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:33.440Z,1516644873.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:33.840Z,1516644873.840 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:33.845Z,1516644873.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:34.255Z,1516644874.255 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:34.265Z,1516644874.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:34.647Z,1516644874.647 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:34.652Z,1516644874.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:35.043Z,1516644875.043 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:35.048Z,1516644875.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:35.450Z,1516644875.450 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:35.455Z,1516644875.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:35.467Z,1516644875.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:35.840Z,1516644875.840 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:35.844Z,1516644875.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:36.249Z,1516644876.249 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:36.258Z,1516644876.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:36.263Z,1516644876.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:36.648Z,1516644876.648 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:36.653Z,1516644876.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:36.667Z,1516644876.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:14:37.045Z,1516644877.045 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:37.050Z,1516644877.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:37.429Z,1516644877.429 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:37.434Z,1516644877.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:37.895Z,1516644877.895 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:37.908Z,1516644877.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:38.237Z,1516644878.237 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:38.241Z,1516644878.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:38.639Z,1516644878.639 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:38.644Z,1516644878.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:39.039Z,1516644879.039 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:39.044Z,1516644879.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:39.429Z,1516644879.429 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:39.434Z,1516644879.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:39.884Z,1516644879.884 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:39.897Z,1516644879.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:40.238Z,1516644880.238 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:40.243Z,1516644880.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:40.640Z,1516644880.640 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:40.645Z,1516644880.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:41.051Z,1516644881.051 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:41.056Z,1516644881.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:41.440Z,1516644881.440 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:41.444Z,1516644881.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:41.888Z,1516644881.888 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:41.893Z,1516644881.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:42.229Z,1516644882.229 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:42.234Z,1516644882.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:42.629Z,1516644882.629 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:42.638Z,1516644882.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:43.032Z,1516644883.032 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:43.037Z,1516644883.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:43.435Z,1516644883.435 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:43.440Z,1516644883.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:43.903Z,1516644883.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:43.928Z,1516644883.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:44.245Z,1516644884.245 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:44.252Z,1516644884.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:44.640Z,1516644884.640 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:44.645Z,1516644884.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:44.645Z,1516644884.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-01-22T18:14:44.645Z,1516644884.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:14:44.647Z,1516644884.647 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:44.647Z,1516644884.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-01-22T18:14:44.647Z,1516644884.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:14:44.649Z,1516644884.649 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:44.649Z,1516644884.649 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-01-22T18:14:44.649Z,1516644884.649 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:14:44.661Z,1516644884.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:14:44.661Z,1516644884.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:14:44.662Z,1516644884.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:14:45.022Z,1516644885.022 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:45.049Z,1516644885.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:14:45.049Z,1516644885.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-01-22T18:14:45.049Z,1516644885.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:14:45.049Z,1516644885.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-01-22T18:14:45.050Z,1516644885.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:14:45.050Z,1516644885.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-01-22T18:14:45.431Z,1516644885.431 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:45.435Z,1516644885.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:14:45.435Z,1516644885.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:14:45.436Z,1516644885.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:14:45.436Z,1516644885.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:14:45.436Z,1516644885.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:14:45.437Z,1516644885.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:14:45.437Z,1516644885.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:14:45.437Z,1516644885.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:14:45.438Z,1516644885.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:14:45.837Z,1516644885.837 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:45.842Z,1516644885.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:49.228Z,1516644889.228 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:49.233Z,1516644889.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:49.377Z,1516644889.377 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:49.383Z,1516644889.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:49.701Z,1516644889.701 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:49.706Z,1516644889.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:50.103Z,1516644890.103 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:50.108Z,1516644890.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:50.502Z,1516644890.502 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:50.507Z,1516644890.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:50.901Z,1516644890.901 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:50.907Z,1516644890.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:51.293Z,1516644891.293 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:51.302Z,1516644891.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:51.704Z,1516644891.704 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:51.709Z,1516644891.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:52.110Z,1516644892.110 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:52.115Z,1516644892.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:52.505Z,1516644892.505 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:52.513Z,1516644892.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:52.555Z,1516644892.555 [CommandLine](IMPORTANT): got command run ./Missions/Insert/Science.xml
2018-01-22T18:14:52.556Z,1516644892.556 [MissionManager](INFO): Uninitializing Mission Science
2018-01-22T18:14:52.566Z,1516644892.566 [MissionManager](INFO): Loading Mission: ./Missions/Insert/Science.xml
2018-01-22T18:14:52.769Z,1516644892.769 [MissionManager](INFO): DefineArg Science.SampleISUS = 0 bool
2018-01-22T18:14:52.772Z,1516644892.772 [MissionManager](INFO): DefineArg Science.SampleISUSmaxPitch = 60.000000 arcdeg
2018-01-22T18:14:52.774Z,1516644892.774 [MissionManager](INFO): DefineArg Science.SampleISUSminPitch = -60.000000 arcdeg
2018-01-22T18:14:52.776Z,1516644892.776 [MissionManager](INFO): DefineArg Science.PeakDetectChlActive = 0 bool
2018-01-22T18:14:52.778Z,1516644892.778 [MissionManager](INFO): DefineArg Science.HighestChlPeakReportActive = 0 bool
2018-01-22T18:14:52.780Z,1516644892.780 [MissionManager](INFO): DefineArg Science.PatchTracking = 0 bool
2018-01-22T18:14:52.782Z,1516644892.782 [MissionManager](INFO): DefineArg Science.FilterWidthHorizontal = 3.000000 count
2018-01-22T18:14:52.784Z,1516644892.784 [MissionManager](INFO): DefineArg Science.NumProfilesSlidingwindow = 100.000000 count
2018-01-22T18:14:52.786Z,1516644892.786 [MissionManager](INFO): DefineArg Science.PeakDetectNO3Active = 0 bool
2018-01-22T18:14:52.788Z,1516644892.788 [MissionManager](INFO): DefineArg Science.PeakDetectOilActive = 0 bool
2018-01-22T18:14:52.790Z,1516644892.790 [MissionManager](INFO): DefineArg Science.UpwardDerivativeOfTemperatureActive = 0 bool
2018-01-22T18:14:52.792Z,1516644892.792 [MissionManager](INFO): DefineArg Science.EnabledAanderaaO2 = 1.000000 bool
2018-01-22T18:14:52.795Z,1516644892.795 [MissionManager](INFO): DefineArg Science.EnabledNeilBrown = 0.000000 bool
2018-01-22T18:14:52.797Z,1516644892.797 [MissionManager](INFO): DefineArg Science.EnabledSeabird = 1.000000 bool
2018-01-22T18:14:52.828Z,1516644892.828 [MissionManager](INFO): DefineArg Science.EnabledTurbulence_NPS = 0.000000 bool
2018-01-22T18:14:52.830Z,1516644892.830 [MissionManager](INFO): DefineArg Science.EnabledWetLabsBB2FL = 1.000000 bool
2018-01-22T18:14:52.833Z,1516644892.833 [MissionManager](INFO): DefineArg Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool
2018-01-22T18:14:52.840Z,1516644892.840 [MissionManager](INFO): DefineArg Science.EnabledISUS = 0.000000 bool
2018-01-22T18:14:52.842Z,1516644892.842 [MissionManager](INFO): DefineArg Science.LowPassWindowLength = 20.000000 count
2018-01-22T18:14:52.848Z,1516644892.848 [MissionManager](INFO): DefineArg Science.PeakChlShallowBound = nan m
2018-01-22T18:14:52.891Z,1516644892.891 [MissionManager](INFO): DefineArg Science.PeakChlDeepBound = nan m
2018-01-22T18:14:52.893Z,1516644892.893 [MissionManager](INFO): DefineOutput Science.PeakChl = 0.000000 ug/l
2018-01-22T18:14:52.903Z,1516644892.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:52.908Z,1516644892.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:52.920Z,1516644892.920 [MissionManager](INFO): DefineOutput Science.PeakChlDepth = 0.000000 m
2018-01-22T18:14:52.922Z,1516644892.922 [MissionManager](INFO): DefineOutput Science.PeakChlTemperature = 0.000000 degC
2018-01-22T18:14:52.942Z,1516644892.942 [MissionManager](INFO): DefineOutput Science.PeakChlLatitude = nan arcdeg
2018-01-22T18:14:52.948Z,1516644892.948 [MissionManager](INFO): DefineOutput Science.PeakChlLongitude = nan arcdeg
2018-01-22T18:14:52.950Z,1516644892.950 [MissionManager](INFO): DefineOutput Science.PeakNO3 = 0.000000 umol/l
2018-01-22T18:14:52.957Z,1516644892.957 [MissionManager](INFO): DefineOutput Science.PeakNO3Depth = 0.000000 m
2018-01-22T18:14:52.963Z,1516644892.963 [MissionManager](INFO): DefineOutput Science.PeakNO3Latitude = nan arcdeg
2018-01-22T18:14:52.965Z,1516644892.965 [MissionManager](INFO): DefineOutput Science.PeakNO3Longitude = nan arcdeg
2018-01-22T18:14:52.972Z,1516644892.972 [MissionManager](INFO): DefineOutput Science.PatchChl = 0.000000 m
2018-01-22T18:14:52.974Z,1516644892.974 [MissionManager](INFO): DefineOutput Science.PatchChlDepth = 0.000000 m
2018-01-22T18:14:52.985Z,1516644892.985 [MissionManager](INFO): DefineOutput Science.PatchChlLatitude = nan arcdeg
2018-01-22T18:14:52.988Z,1516644892.988 [MissionManager](INFO): DefineOutput Science.PatchChlLongitude = nan arcdeg
2018-01-22T18:14:52.990Z,1516644892.990 [MissionManager](INFO): DefineOutput Science.PatchChlDistance = nan arcdeg
2018-01-22T18:14:52.996Z,1516644892.996 [MissionManager](INFO): DefineOutput Science.PeakOil = 0.000000 kg/m3
2018-01-22T18:14:52.998Z,1516644892.998 [MissionManager](INFO): DefineOutput Science.PeakOilDepth = 0.000000 m
2018-01-22T18:14:53.005Z,1516644893.005 [MissionManager](INFO): DefineOutput Science.PeakOilLatitude = nan arcdeg
2018-01-22T18:14:53.011Z,1516644893.011 [MissionManager](INFO): DefineOutput Science.PeakOilLongitude = nan arcdeg
2018-01-22T18:14:53.037Z,1516644893.037 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:14:53.087Z,1516644893.087 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2018-01-22T18:14:53.113Z,1516644893.113 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:14:53.126Z,1516644893.126 [Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-01-22T18:14:53.170Z,1516644893.170 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Derivation="Tethys/Derivation"
       xmlns:Science="Tethys/Science"
       xmlns:Sensor="Tethys/Sensor"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Derivation http://okeanids.mbari.org/tethys/Xml/Derivation.xsd
                           Tethys/Science http://okeanids.mbari.org/tethys/Xml/Science.xsd
                           Tethys/Sensor http://okeanids.mbari.org/tethys/Xml/Sensor.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Science">

    <DefineArg Name="SampleISUS"><Description>
        Set either this or PeakDetectNO3Active to True in order to sample
        Nitrate. EnabledISUS must also be true.
    </Description><False/></DefineArg>

    <DefineArg Name="SampleISUSmaxPitch"><Description>
        Maximum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>60.0</Value></DefineArg>

    <DefineArg Name="SampleISUSminPitch"><Description>
        Minimum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>-60.0</Value></DefineArg>

    <DefineArg Name="PeakDetectChlActive"><Description>
        Turns on peak detection of Cholorphyll.
    </Description><False/></DefineArg>

    <DefineArg Name="HighestChlPeakReportActive"><Description>
        Turns on reporting of the highest peak value on yo-yo profiles in a
        horizontal sliding window (of length numProfilesSlidingwindow)
    </Description><False/></DefineArg>

    <DefineArg Name="PatchTracking"><Description>
        If tracking a patch
    </Description><False/></DefineArg>

    <DefineArg Name="FilterWidthHorizontal"><Description>
        Width of boxcar filter applied to yoyo-wise chl peaks to pick out the
        highest peak.
    </Description><Units:count/><Value>3</Value></DefineArg>

    <DefineArg Name="NumProfilesSlidingwindow"><Description>
        Length of horizontal sliding window. The highest yoyo-wise chl peak
        (after low-pass filtering by a filter of length FilterWidthHorizontal)
        within this window.
    </Description><Units:count/><Value>100</Value></DefineArg>

    <DefineArg Name="PeakDetectNO3Active"><Description>
        Turns on peak detection of Nitrate (and turns on ISUS).
    </Description><False/></DefineArg>

    <DefineArg Name="PeakDetectOilActive"><Description>
        Turns on peak detection of Dissolved Oil.
    </Description><False/></DefineArg>

    <DefineArg Name="UpwardDerivativeOfTemperatureActive"><Description>
        Turns on seawater temperature derivative.
    </Description><False/></DefineArg>

    <DefineArg Name="EnabledAanderaaO2"><Description>
        Automatically set to True if the Aanderaa O2 sensor is installed. Set to
        false to disable reading Aandera O2.
    </Description><Science:Aanderaa_O2.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledNeilBrown"><Description>
        Automatically set to true if the Neil Brown CTD is enabled. Set to false
        to disable reading from the Neil Brown.
    </Description><Science:CTD_NeilBrown.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledSeabird"><Description>
        Automatically set to true if the CTD is enabled. Set to false to disable
        reading from the CTD.
    </Description><Science:CTD_Seabird.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledTurbulence_NPS"><Description>
        Automatically set to true if the NPS Turbulence sensor is enabled. Set
        to false to disable reading from the NPS Turbulence sensor.
    </Description><Science:Turbulence_NPS.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsBB2FL"><Description>
        Automatically set to true if the the WetLabs BB2FL is enabled. Set to
        false to disable the WetLabs BB2FL.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsSeaOWL_UV_A"><Description>
        Automatically set to true if the the WetLabs SeaOWL UV-A is enabled. Set
        to false to disable the WetLabs SeaOWL UV-A.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledISUS"><Description>
        Automatically set to True if ISUS is enabled. Set to false to disable
        ISUS.
    </Description><Science:ISUS.loadAtStartup/></DefineArg>

<!--
    <DefineArg Name="EnabledSeeStar"><Description>
        Automatically set to True if SeeStar/SCPI is enabled. Set false to
        override.
    </Description><Sensor:SCPI.loadAtStartup/></DefineArg>

    <DefineArg Name="SeeStarTimeout"><Description>
        Timeout to trigger/read trigger for SeeStar camera.
    </Description><Sensor:SCPI.sampleTime/></DefineArg>

    <DefineArg Name="SeeStarTriggerDepth"><Description>
        Trigger the camera above this depth.
    </Description><Units:meter/><Value>40.0</Value></DefineArg>
-->

    <DefineArg Name="LowPassWindowLength"><Description>
        Low-pass window length (based on depth sensor sampling interval 0.4
        second) for low-pass filtering.
    </Description><Units:count/><Value>20</Value></DefineArg>

    <DefineArg Name="PeakChlShallowBound"><Description>
        Shallow depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineArg Name="PeakChlDeepBound"><Description>
        Deep depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineOutput Name="PeakChl"><Units:microgram_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlTemperature"><Units:celsius/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3"><Units:micromole_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Depth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Latitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Longitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChl"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlDistance"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOil"><Units:kilogram_per_cubic_meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakOilLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakOilLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <Parallel/>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledAanderaaO2"/>
        </While>
        <Universal:mass_concentration_of_oxygen_in_sea_water/>
    </ReadData>

    <ReadData>
        <While>
            <Arg Name="EnabledISUS"/>
            <And><Universal:platform_pitch_angle/><Lt><Arg Name="SampleISUSmaxPitch"/></Lt><And><Universal:platform_pitch_angle/><Gt><Arg Name="SampleISUSminPitch"/></Gt><And><Arg Name="SampleISUS"/><Or><Arg Name="PeakDetectNO3Active"/></Or></And></And></And>
        </While>
        <Universal:mole_concentration_of_nitrate_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
        </While>
        <Universal:sea_water_temperature/>
        <Universal:sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledSeabird"/>
        </While>
        <Science:CTD_Seabird.sea_water_temperature/>
        <Science:CTD_Seabird.sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
            <And><Arg Name="UpwardDerivativeOfTemperatureActive"/></And>
        </While>
        <Universal:upward_derivative_of_sea_water_temperature/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledTurbulence_NPS"/>
        </While>
        <Science:Turbulence_NPS.MicroCond/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsBB2FL"/>
            <Or><Arg Name="PeakDetectChlActive"/></Or>
        </While>
        <Universal:mass_concentration_of_chlorophyll_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsSeaOWL_UV_A"/>
            <Or><Arg Name="PeakDetectOilActive"/></Or>
        </While>
        <Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/>
    </ReadData>

    <Aggregate  Id="PeakDetectChl">

        <While>
            <Arg Name="PeakDetectChlActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_chlorophyll_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.shallowBound/><Arg Name="PeakChlShallowBound"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.deepBound/><Arg Name="PeakChlDeepBound"/></Setting>
            <OutputArg Name="PeakChl"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakChlDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakChlTemperature"><Trigger:PeakDetectVsDepth.peakTemperature/></OutputArg>
            <OutputArg Name="PeakChlLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakChlLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakChl"/><Arg Name="PeakChlDepth"/>
        </SendData>

    </Aggregate>

    <Aggregate Id="HighestChlPeakReport">

        <While>
            <Arg Name="HighestChlPeakReportActive"/>
        </While>

        <Trigger:PeakDetectHorizontal>
            <Sequence/>
            <Setting><Trigger:PeakDetectHorizontal.detectFrom/><Arg Name="PeakChl"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.depthFrom/><Arg Name="PeakChlDepth"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.latitudeFrom/><Arg Name="PeakChlLatitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.longitudeFrom/><Arg Name="PeakChlLongitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.patchTracking/><Arg Name="PatchTracking"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.filterWidth/><Arg Name="FilterWidthHorizontal"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.numProfilesSlidingwindow/><Arg Name="NumProfilesSlidingwindow"/></Setting>
            <OutputArg Name="PatchChl"><Trigger:PeakDetectHorizontal.peakDetect/></OutputArg>
            <OutputArg Name="PatchChlDepth"><Trigger:PeakDetectHorizontal.peakDepth/></OutputArg>
            <OutputArg Name="PatchChlLatitude"><Trigger:PeakDetectHorizontal.peakLatitude/></OutputArg>
            <OutputArg Name="PatchChlLongitude"><Trigger:PeakDetectHorizontal.peakLongitude/></OutputArg>
            <OutputArg Name="PatchChlDistance"><Trigger:PeakDetectHorizontal.peakDistance/></OutputArg>
        </Trigger:PeakDetectHorizontal>

    </Aggregate>

    <Aggregate Id="PeakDetectNO3">

        <While>
            <Arg Name="PeakDetectNO3Active"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mole_concentration_of_nitrate_in_sea_water/></Setting>
            <OutputArg Name="PeakNO3"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakNO3Depth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakNO3Latitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakNO3Longitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakNO3"/><Arg Name="PeakNO3Depth"/>
        </SendData>

    </Aggregate>

    <Aggregate  Id="PeakDetectOil">

        <While>
            <Arg Name="PeakDetectOilActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_petroleum_hydrocarbons_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <OutputArg Name="PeakOil"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakOilDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakOilLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakOilLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakOil"/><Arg Name="PeakOilDepth"/>
        </SendData>

    </Aggregate>

<!--
    <Aggregate Id="RollSeeStar">

        <Description>
            Turn on the SeeStar/SCPI camera.
        </Description>

        <When>
            <Arg Name="EnabledSeeStar"/>
            <And><Universal:depth/><Lt><Arg Name="SeeStarTriggerDepth"/></Lt></And>
        </When>

        <ReadDatum Id="TriggerSeeStar">
            <Timeout Duration="SeeStarTimeout"/>
            <Sensor:SCPI.sampleSCPI/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Arg Name="SeeStarTimeout"/></Setting>
        </Guidance:Wait>

    </Aggregate>
-->

</Aggregate>


2018-01-22T18:14:53.176Z,1516644893.176 [CommandLine](IMPORTANT): Running ./Missions/Insert/Science.xml
2018-01-22T18:14:53.307Z,1516644893.307 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:53.316Z,1516644893.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:53.688Z,1516644893.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:53.710Z,1516644893.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:54.108Z,1516644894.108 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:54.115Z,1516644894.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:54.511Z,1516644894.511 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:54.516Z,1516644894.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:54.937Z,1516644894.937 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:54.942Z,1516644894.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:55.335Z,1516644895.335 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:55.340Z,1516644895.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:55.726Z,1516644895.726 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:55.731Z,1516644895.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:56.131Z,1516644896.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:56.136Z,1516644896.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:56.535Z,1516644896.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:56.544Z,1516644896.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:56.949Z,1516644896.949 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:56.954Z,1516644896.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:57.348Z,1516644897.348 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:57.352Z,1516644897.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:57.728Z,1516644897.728 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:57.733Z,1516644897.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:58.126Z,1516644898.126 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:58.131Z,1516644898.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:58.536Z,1516644898.536 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:58.541Z,1516644898.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:58.947Z,1516644898.947 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:58.952Z,1516644898.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:59.336Z,1516644899.336 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:59.341Z,1516644899.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:14:59.729Z,1516644899.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:14:59.734Z,1516644899.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:00.124Z,1516644900.124 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:00.129Z,1516644900.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:00.536Z,1516644900.536 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:00.541Z,1516644900.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:00.940Z,1516644900.940 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:00.944Z,1516644900.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:01.336Z,1516644901.336 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:01.341Z,1516644901.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:01.726Z,1516644901.726 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:01.731Z,1516644901.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:02.134Z,1516644902.134 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:02.139Z,1516644902.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:02.536Z,1516644902.536 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:02.541Z,1516644902.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:02.939Z,1516644902.939 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:02.944Z,1516644902.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:03.347Z,1516644903.347 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:03.352Z,1516644903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:03.463Z,1516644903.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:03.736Z,1516644903.736 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:03.741Z,1516644903.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:04.135Z,1516644904.135 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:04.140Z,1516644904.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:04.260Z,1516644904.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:04.543Z,1516644904.543 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:04.548Z,1516644904.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:04.942Z,1516644904.942 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:04.947Z,1516644904.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:05.055Z,1516644905.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:05.328Z,1516644905.328 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:05.345Z,1516644905.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:05.731Z,1516644905.731 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:05.760Z,1516644905.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:05.851Z,1516644905.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:06.129Z,1516644906.129 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:06.134Z,1516644906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:06.255Z,1516644906.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:06.537Z,1516644906.537 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:06.542Z,1516644906.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:06.935Z,1516644906.935 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:06.940Z,1516644906.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:07.331Z,1516644907.331 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:07.336Z,1516644907.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:07.431Z,1516644907.431 [CommandLine](IMPORTANT): got command show stack
2018-01-22T18:15:07.431Z,1516644907.431 [CommandLine](IMPORTANT): Behavior Stack:

2018-01-22T18:15:07.432Z,1516644907.432 [Startup](IMPORTANT): Priority 0: Startup:A.GoToSurface
2018-01-22T18:15:07.725Z,1516644907.725 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:07.729Z,1516644907.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:08.131Z,1516644908.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:08.136Z,1516644908.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:08.529Z,1516644908.529 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:08.535Z,1516644908.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:08.933Z,1516644908.933 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:08.937Z,1516644908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:09.331Z,1516644909.331 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:09.336Z,1516644909.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:09.719Z,1516644909.719 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:09.724Z,1516644909.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:10.137Z,1516644910.137 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:10.146Z,1516644910.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:10.529Z,1516644910.529 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:10.542Z,1516644910.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:10.943Z,1516644910.943 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:10.948Z,1516644910.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:11.344Z,1516644911.344 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:11.349Z,1516644911.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:11.727Z,1516644911.727 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:11.732Z,1516644911.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:12.127Z,1516644912.127 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:12.132Z,1516644912.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:12.529Z,1516644912.529 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:12.534Z,1516644912.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:12.937Z,1516644912.937 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:12.942Z,1516644912.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:13.329Z,1516644913.329 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:13.334Z,1516644913.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:13.727Z,1516644913.727 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:13.736Z,1516644913.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:14.134Z,1516644914.134 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:14.139Z,1516644914.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:14.533Z,1516644914.533 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:14.539Z,1516644914.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:14.933Z,1516644914.933 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:14.938Z,1516644914.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:15.335Z,1516644915.335 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:15.340Z,1516644915.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:15.735Z,1516644915.735 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:15.740Z,1516644915.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:16.124Z,1516644916.124 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:16.129Z,1516644916.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:16.543Z,1516644916.543 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:16.548Z,1516644916.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:16.938Z,1516644916.938 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:16.943Z,1516644916.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:17.339Z,1516644917.339 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:17.344Z,1516644917.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:17.483Z,1516644917.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:17.729Z,1516644917.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:17.734Z,1516644917.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:18.124Z,1516644918.124 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:18.129Z,1516644918.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:18.281Z,1516644918.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:18.543Z,1516644918.543 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:18.548Z,1516644918.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:18.691Z,1516644918.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:18.941Z,1516644918.941 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:18.946Z,1516644918.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:19.339Z,1516644919.339 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:19.344Z,1516644919.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:19.487Z,1516644919.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:19.737Z,1516644919.737 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:19.742Z,1516644919.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:20.131Z,1516644920.131 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:20.136Z,1516644920.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:20.283Z,1516644920.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:20.551Z,1516644920.551 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:20.576Z,1516644920.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:20.687Z,1516644920.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:20.951Z,1516644920.951 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:20.956Z,1516644920.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:21.350Z,1516644921.350 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:21.359Z,1516644921.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:21.732Z,1516644921.732 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:21.737Z,1516644921.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:22.133Z,1516644922.133 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:22.150Z,1516644922.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:22.561Z,1516644922.561 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:22.566Z,1516644922.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:22.971Z,1516644922.971 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:22.996Z,1516644922.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:23.333Z,1516644923.333 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:23.363Z,1516644923.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:23.752Z,1516644923.752 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:23.765Z,1516644923.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:24.136Z,1516644924.136 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:24.145Z,1516644924.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:24.547Z,1516644924.547 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:24.552Z,1516644924.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:24.941Z,1516644924.941 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:24.946Z,1516644924.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:25.343Z,1516644925.343 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:25.348Z,1516644925.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:25.727Z,1516644925.727 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:25.732Z,1516644925.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:26.129Z,1516644926.129 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:26.134Z,1516644926.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:26.547Z,1516644926.547 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:26.556Z,1516644926.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:26.947Z,1516644926.947 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:26.952Z,1516644926.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:27.348Z,1516644927.348 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:27.352Z,1516644927.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:27.739Z,1516644927.739 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:27.748Z,1516644927.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:28.136Z,1516644928.136 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:28.141Z,1516644928.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:28.520Z,1516644928.520 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:28.545Z,1516644928.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:28.937Z,1516644928.937 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:28.947Z,1516644928.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:29.359Z,1516644929.359 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:29.365Z,1516644929.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:29.761Z,1516644929.761 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:29.766Z,1516644929.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:30.127Z,1516644930.127 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:30.132Z,1516644930.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:30.535Z,1516644930.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:30.572Z,1516644930.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:30.820Z,1516644930.820 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool
2018-01-22T18:15:30.927Z,1516644930.927 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:30.932Z,1516644930.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:31.327Z,1516644931.327 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:31.332Z,1516644931.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:31.507Z,1516644931.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:31.737Z,1516644931.737 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:31.742Z,1516644931.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:32.139Z,1516644932.139 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:32.144Z,1516644932.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:32.305Z,1516644932.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:32.541Z,1516644932.541 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:32.546Z,1516644932.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:32.715Z,1516644932.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:32.925Z,1516644932.925 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:32.934Z,1516644932.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:33.331Z,1516644933.331 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:33.336Z,1516644933.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:33.511Z,1516644933.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:33.731Z,1516644933.731 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:33.740Z,1516644933.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:34.136Z,1516644934.136 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:34.141Z,1516644934.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:34.252Z,1516644934.252 [CommandLine](IMPORTANT): got command show stack
2018-01-22T18:15:34.252Z,1516644934.252 [CommandLine](IMPORTANT): Behavior Stack:

2018-01-22T18:15:34.252Z,1516644934.252 [Startup](IMPORTANT): Priority 0: Startup:A.GoToSurface
2018-01-22T18:15:34.307Z,1516644934.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:34.535Z,1516644934.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:34.544Z,1516644934.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:34.711Z,1516644934.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:34.947Z,1516644934.947 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:34.952Z,1516644934.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:35.347Z,1516644935.347 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:35.352Z,1516644935.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:35.737Z,1516644935.737 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:35.742Z,1516644935.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:36.134Z,1516644936.134 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:36.139Z,1516644936.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:36.531Z,1516644936.531 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:36.544Z,1516644936.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:36.935Z,1516644936.935 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:36.940Z,1516644936.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:37.323Z,1516644937.323 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:37.356Z,1516644937.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:37.729Z,1516644937.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:37.754Z,1516644937.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:38.151Z,1516644938.151 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:38.156Z,1516644938.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:38.551Z,1516644938.551 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:38.556Z,1516644938.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:38.931Z,1516644938.931 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:38.964Z,1516644938.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:39.047Z,1516644939.047 [CommandLine](IMPORTANT): got command get depth
2018-01-22T18:15:39.047Z,1516644939.047 [CommandLine](FAULT): Element has no value
2018-01-22T18:15:39.327Z,1516644939.327 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:39.332Z,1516644939.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:39.721Z,1516644939.721 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:39.727Z,1516644939.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:40.130Z,1516644940.130 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:40.135Z,1516644940.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:40.531Z,1516644940.531 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:40.536Z,1516644940.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:40.929Z,1516644940.929 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:40.934Z,1516644940.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:41.339Z,1516644941.339 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:41.373Z,1516644941.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:41.729Z,1516644941.729 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:41.733Z,1516644941.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:42.133Z,1516644942.133 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:42.139Z,1516644942.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:42.401Z,1516644942.401 [CommandLine](IMPORTANT): got command set depth 0.000000 meter
2018-01-22T18:15:42.522Z,1516644942.522 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:42.531Z,1516644942.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:42.560Z,1516644942.560 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T18:15:42.930Z,1516644942.930 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:42.935Z,1516644942.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:43.335Z,1516644943.335 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:43.340Z,1516644943.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:43.745Z,1516644943.745 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:43.750Z,1516644943.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:44.144Z,1516644944.144 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:44.151Z,1516644944.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:44.535Z,1516644944.535 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:44.540Z,1516644944.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:44.925Z,1516644944.925 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:44.931Z,1516644944.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:45.334Z,1516644945.334 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:45.339Z,1516644945.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:45.543Z,1516644945.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:45.733Z,1516644945.733 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:45.742Z,1516644945.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:46.128Z,1516644946.128 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:46.133Z,1516644946.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:46.339Z,1516644946.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:46.755Z,1516644946.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:15:47.980Z,1516644947.980 [CommandLine](IMPORTANT): got command maintain sensor depth 0.000000 meter
2018-01-22T18:15:47.984Z,1516644947.984 [ComponentRegistry](DEBUG): SyncComponent "Maintain_depth" handled in the control thread.
2018-01-22T18:15:49.541Z,1516644949.541 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:49.546Z,1516644949.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:49.566Z,1516644949.566 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Maintain_depth,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-22T18:15:49.688Z,1516644949.688 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:49.693Z,1516644949.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:50.065Z,1516644950.065 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:50.091Z,1516644950.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:50.433Z,1516644950.433 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:50.439Z,1516644950.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:50.808Z,1516644950.808 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:50.817Z,1516644950.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:51.209Z,1516644951.209 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:51.214Z,1516644951.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:51.623Z,1516644951.623 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:51.641Z,1516644951.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:52.045Z,1516644952.045 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:52.074Z,1516644952.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:52.199Z,1516644952.199 [CommandLine](IMPORTANT): got command get depth
2018-01-22T18:15:52.199Z,1516644952.199 [CommandLine](FAULT): Element has no value
2018-01-22T18:15:52.420Z,1516644952.420 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:52.430Z,1516644952.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:52.827Z,1516644952.827 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:52.836Z,1516644952.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:53.225Z,1516644953.225 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:53.230Z,1516644953.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:53.631Z,1516644953.631 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:53.636Z,1516644953.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:54.037Z,1516644954.037 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:54.065Z,1516644954.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:54.415Z,1516644954.415 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:54.420Z,1516644954.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:54.811Z,1516644954.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:54.816Z,1516644954.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:55.218Z,1516644955.218 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:55.223Z,1516644955.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:55.621Z,1516644955.621 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:55.626Z,1516644955.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:56.065Z,1516644956.065 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:56.089Z,1516644956.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:56.421Z,1516644956.421 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:56.434Z,1516644956.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:56.811Z,1516644956.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:56.816Z,1516644956.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:57.219Z,1516644957.219 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:57.224Z,1516644957.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:57.613Z,1516644957.613 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:57.619Z,1516644957.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:58.017Z,1516644958.017 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:58.022Z,1516644958.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:58.427Z,1516644958.427 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:58.432Z,1516644958.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:58.823Z,1516644958.823 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:58.828Z,1516644958.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:59.210Z,1516644959.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:59.215Z,1516644959.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:15:59.623Z,1516644959.623 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:15:59.628Z,1516644959.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:00.025Z,1516644960.025 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:00.039Z,1516644960.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:00.426Z,1516644960.426 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:00.431Z,1516644960.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:00.817Z,1516644960.817 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:00.822Z,1516644960.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:01.211Z,1516644961.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:01.216Z,1516644961.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:01.622Z,1516644961.622 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:01.627Z,1516644961.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:02.041Z,1516644962.041 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:02.046Z,1516644962.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:02.414Z,1516644962.414 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:02.427Z,1516644962.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:02.812Z,1516644962.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:02.817Z,1516644962.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:03.211Z,1516644963.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:03.217Z,1516644963.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:03.620Z,1516644963.620 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:03.625Z,1516644963.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:04.060Z,1516644964.060 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:04.070Z,1516644964.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:04.423Z,1516644964.423 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:04.429Z,1516644964.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:04.810Z,1516644964.810 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:04.823Z,1516644964.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:05.210Z,1516644965.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:05.215Z,1516644965.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:05.622Z,1516644965.622 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:05.627Z,1516644965.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:06.052Z,1516644966.052 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:06.065Z,1516644966.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:06.427Z,1516644966.427 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:06.432Z,1516644966.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:06.807Z,1516644966.807 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:06.839Z,1516644966.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:07.207Z,1516644967.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:07.236Z,1516644967.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:07.627Z,1516644967.627 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:07.632Z,1516644967.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:08.053Z,1516644968.053 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:08.062Z,1516644968.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:08.431Z,1516644968.431 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:08.436Z,1516644968.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:08.811Z,1516644968.811 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:08.816Z,1516644968.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:09.210Z,1516644969.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:09.215Z,1516644969.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:09.620Z,1516644969.620 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:09.625Z,1516644969.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:10.084Z,1516644970.084 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:10.093Z,1516644970.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:10.427Z,1516644970.427 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:10.432Z,1516644970.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:10.823Z,1516644970.823 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:10.828Z,1516644970.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:11.221Z,1516644971.221 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:11.226Z,1516644971.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:11.621Z,1516644971.621 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:11.630Z,1516644971.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:12.031Z,1516644972.031 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:12.036Z,1516644972.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:12.429Z,1516644972.429 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:12.434Z,1516644972.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:12.827Z,1516644972.827 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:12.832Z,1516644972.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:13.228Z,1516644973.228 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:13.234Z,1516644973.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:13.628Z,1516644973.628 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:13.633Z,1516644973.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:14.029Z,1516644974.029 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:14.034Z,1516644974.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:14.447Z,1516644974.447 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:14.452Z,1516644974.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:14.812Z,1516644974.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:14.841Z,1516644974.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:15.210Z,1516644975.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:15.215Z,1516644975.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:15.613Z,1516644975.613 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:16:15.613Z,1516644975.613 [BPC1] Communications Fault, FailCount= 2
2018-01-22T18:16:15.613Z,1516644975.613 [BPC1](ERROR): Communications Fault
2018-01-22T18:16:15.616Z,1516644975.616 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:15.620Z,1516644975.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:15.645Z,1516644975.645 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:16:16.056Z,1516644976.056 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:16.065Z,1516644976.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:16.419Z,1516644976.419 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:16.424Z,1516644976.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:16.810Z,1516644976.810 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:16.823Z,1516644976.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:16.856Z,1516644976.856 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:16:16.856Z,1516644976.856 [BPC1] No Fault, FailCount= 2
2018-01-22T18:16:17.267Z,1516644977.267 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:17.272Z,1516644977.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:17.621Z,1516644977.621 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:17.630Z,1516644977.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:18.082Z,1516644978.082 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:18.092Z,1516644978.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:18.431Z,1516644978.431 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:18.448Z,1516644978.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:18.821Z,1516644978.821 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:18.826Z,1516644978.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:19.219Z,1516644979.219 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:19.224Z,1516644979.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:19.629Z,1516644979.629 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:19.634Z,1516644979.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:20.080Z,1516644980.080 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:20.089Z,1516644980.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:20.435Z,1516644980.435 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:20.440Z,1516644980.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:20.808Z,1516644980.808 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:20.813Z,1516644980.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:21.219Z,1516644981.219 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:21.252Z,1516644981.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:21.611Z,1516644981.611 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:21.616Z,1516644981.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:22.084Z,1516644982.084 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:22.093Z,1516644982.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:22.388Z,1516644982.388 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T18:16:22.388Z,1516644982.388 [NAL9602] Data Fault, FailCount= 1
2018-01-22T18:16:22.388Z,1516644982.388 [NAL9602](ERROR): Data Fault
2018-01-22T18:16:22.431Z,1516644982.431 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:22.448Z,1516644982.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:22.465Z,1516644982.465 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T18:16:22.784Z,1516644982.784 [NAL9602](INFO): Powering down
2018-01-22T18:16:22.831Z,1516644982.831 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:22.837Z,1516644982.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:23.211Z,1516644983.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:23.216Z,1516644983.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:23.619Z,1516644983.619 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:23.624Z,1516644983.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:23.636Z,1516644983.636 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T18:16:23.636Z,1516644983.636 [NAL9602] No Fault, FailCount= 1
2018-01-22T18:16:24.065Z,1516644984.065 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:24.094Z,1516644984.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:24.421Z,1516644984.421 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:24.454Z,1516644984.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:24.815Z,1516644984.815 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:24.820Z,1516644984.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:25.206Z,1516644985.206 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:25.211Z,1516644985.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:25.610Z,1516644985.610 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:25.615Z,1516644985.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:26.028Z,1516644986.028 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:26.033Z,1516644986.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:26.442Z,1516644986.442 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:26.463Z,1516644986.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:26.812Z,1516644986.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:26.817Z,1516644986.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:27.215Z,1516644987.215 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:27.220Z,1516644987.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:27.612Z,1516644987.612 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:27.617Z,1516644987.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:28.010Z,1516644988.010 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:28.016Z,1516644988.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:28.423Z,1516644988.423 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:28.436Z,1516644988.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:28.822Z,1516644988.822 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:28.827Z,1516644988.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:29.202Z,1516644989.202 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:29.228Z,1516644989.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:29.624Z,1516644989.624 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:29.629Z,1516644989.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:30.078Z,1516644990.078 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:30.083Z,1516644990.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:30.413Z,1516644990.413 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:30.418Z,1516644990.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:30.806Z,1516644990.806 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:30.819Z,1516644990.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:31.223Z,1516644991.223 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:31.278Z,1516644991.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:31.606Z,1516644991.606 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:31.611Z,1516644991.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:32.071Z,1516644992.071 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:32.081Z,1516644992.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:32.431Z,1516644992.431 [BPC1](INFO): Initialized
2018-01-22T18:16:32.439Z,1516644992.439 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:32.444Z,1516644992.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:32.807Z,1516644992.807 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:32.813Z,1516644992.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:33.211Z,1516644993.211 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:33.217Z,1516644993.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:33.606Z,1516644993.606 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:33.611Z,1516644993.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:34.069Z,1516644994.069 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:34.083Z,1516644994.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:34.408Z,1516644994.408 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:34.413Z,1516644994.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:34.807Z,1516644994.807 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:34.816Z,1516644994.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:35.212Z,1516644995.212 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:35.217Z,1516644995.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:35.617Z,1516644995.617 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:35.622Z,1516644995.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:36.045Z,1516644996.045 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:36.073Z,1516644996.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:36.404Z,1516644996.404 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:36.409Z,1516644996.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:36.807Z,1516644996.807 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:36.816Z,1516644996.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:37.217Z,1516644997.217 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:37.222Z,1516644997.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:37.610Z,1516644997.610 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:37.615Z,1516644997.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:38.011Z,1516644998.011 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:38.016Z,1516644998.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:38.408Z,1516644998.408 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:38.417Z,1516644998.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:38.815Z,1516644998.815 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:38.820Z,1516644998.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:39.210Z,1516644999.210 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:39.215Z,1516644999.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:39.356Z,1516644999.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:16:39.619Z,1516644999.619 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:39.637Z,1516644999.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:40.008Z,1516645000.008 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:40.013Z,1516645000.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:40.152Z,1516645000.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:16:40.448Z,1516645000.448 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:40.457Z,1516645000.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:40.813Z,1516645000.813 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:40.817Z,1516645000.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:41.209Z,1516645001.209 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:41.213Z,1516645001.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:41.613Z,1516645001.613 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:41.618Z,1516645001.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:42.014Z,1516645002.014 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:42.019Z,1516645002.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:42.452Z,1516645002.452 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:42.461Z,1516645002.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:42.812Z,1516645002.812 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:42.817Z,1516645002.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:43.220Z,1516645003.220 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:43.225Z,1516645003.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:43.610Z,1516645003.610 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:43.615Z,1516645003.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:44.077Z,1516645004.077 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:44.103Z,1516645004.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:44.421Z,1516645004.421 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:44.426Z,1516645004.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:44.803Z,1516645004.803 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:44.838Z,1516645004.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:45.207Z,1516645005.207 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:45.245Z,1516645005.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:45.607Z,1516645005.607 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:45.645Z,1516645005.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:46.003Z,1516645006.003 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:46.007Z,1516645006.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:46.421Z,1516645006.421 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:46.425Z,1516645006.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:49.645Z,1516645009.645 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:49.650Z,1516645009.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:49.767Z,1516645009.767 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:49.772Z,1516645009.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:50.138Z,1516645010.138 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:50.148Z,1516645010.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:50.524Z,1516645010.524 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:50.534Z,1516645010.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:50.909Z,1516645010.909 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:50.914Z,1516645010.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:51.315Z,1516645011.315 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:51.320Z,1516645011.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:51.708Z,1516645011.708 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:51.712Z,1516645011.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:52.160Z,1516645012.160 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:52.184Z,1516645012.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:52.521Z,1516645012.521 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:52.526Z,1516645012.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:52.876Z,1516645012.876 [NAL9602](INFO): Powering up NAL9602
2018-01-22T18:16:52.903Z,1516645012.903 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:52.936Z,1516645012.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:53.303Z,1516645013.303 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:53.308Z,1516645013.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:53.717Z,1516645013.717 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:53.721Z,1516645013.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:54.112Z,1516645014.112 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:54.117Z,1516645014.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:54.543Z,1516645014.543 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:54.560Z,1516645014.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:54.915Z,1516645014.915 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:54.958Z,1516645014.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:55.265Z,1516645015.265 [CommandLine](IMPORTANT): got command maintain sensor CTD_Seabird.depth 0.000000 meter
2018-01-22T18:16:55.266Z,1516645015.266 [ComponentRegistry](DEBUG): SyncComponent "Maintain_CTD_Seabird.depth" handled in the control thread.
2018-01-22T18:16:55.329Z,1516645015.329 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-01-22T18:16:55.334Z,1516645015.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:55.378Z,1516645015.378 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Maintain_depth,Maintain_CTD_Seabird.depth,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-22T18:16:55.725Z,1516645015.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:55.729Z,1516645015.729 [Startup:StartupSatComms] Running Loop=1
2018-01-22T18:16:55.730Z,1516645015.730 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-01-22T18:16:55.730Z,1516645015.730 [Startup:StartupSatComms:A] Running Loop=1
2018-01-22T18:16:56.120Z,1516645016.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:56.124Z,1516645016.124 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-01-22T18:16:56.523Z,1516645016.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:56.917Z,1516645016.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:57.332Z,1516645017.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:57.516Z,1516645017.516 [CommandLine](IMPORTANT): got command get depth
2018-01-22T18:16:57.517Z,1516645017.517 [CommandLine](IMPORTANT): depth 0.000000 m
2018-01-22T18:16:57.827Z,1516645017.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:58.220Z,1516645018.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:58.625Z,1516645018.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:59.026Z,1516645019.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:59.435Z,1516645019.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:16:59.556Z,1516645019.556 [CommandLine](IMPORTANT): got command show best depth
2018-01-22T18:16:59.557Z,1516645019.557 [CommandLine](IMPORTANT): depth best is CTD_Seabird.depth
2018-01-22T18:16:59.832Z,1516645019.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:00.231Z,1516645020.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:00.613Z,1516645020.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:01.036Z,1516645021.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:01.416Z,1516645021.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:01.835Z,1516645021.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:02.238Z,1516645022.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:02.627Z,1516645022.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:03.016Z,1516645023.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:03.443Z,1516645023.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:03.792Z,1516645023.792 [NAL9602](INFO): NAL9602 initialized
2018-01-22T18:17:03.853Z,1516645023.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:04.216Z,1516645024.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:04.626Z,1516645024.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:05.056Z,1516645025.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:05.419Z,1516645025.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:05.823Z,1516645025.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:06.231Z,1516645026.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:06.637Z,1516645026.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:06.680Z,1516645026.680 [CommandLine](IMPORTANT): got command show stack
2018-01-22T18:17:06.680Z,1516645026.680 [CommandLine](IMPORTANT): Behavior Stack:

2018-01-22T18:17:06.680Z,1516645026.680 [Startup](IMPORTANT): Priority 0: Startup:A.GoToSurface
2018-01-22T18:17:06.681Z,1516645026.681 [Startup:StartupSatComms](IMPORTANT): Priority 1: Startup:StartupSatComms:A
2018-01-22T18:17:07.065Z,1516645027.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:07.433Z,1516645027.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:07.819Z,1516645027.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:08.232Z,1516645028.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:08.628Z,1516645028.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:09.028Z,1516645029.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:09.432Z,1516645029.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:09.843Z,1516645029.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:10.234Z,1516645030.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:10.629Z,1516645030.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:11.030Z,1516645031.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:11.433Z,1516645031.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:11.830Z,1516645031.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:12.231Z,1516645032.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:12.637Z,1516645032.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:13.045Z,1516645033.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:13.443Z,1516645033.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:13.824Z,1516645033.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:14.237Z,1516645034.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:14.635Z,1516645034.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:15.044Z,1516645035.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:15.445Z,1516645035.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:15.842Z,1516645035.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:16.264Z,1516645036.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:16.615Z,1516645036.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:17.016Z,1516645037.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:17.465Z,1516645037.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:17.823Z,1516645037.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:18.255Z,1516645038.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:18.653Z,1516645038.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:19.049Z,1516645039.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:19.459Z,1516645039.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:19.825Z,1516645039.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:20.237Z,1516645040.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:20.630Z,1516645040.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:21.031Z,1516645041.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:21.441Z,1516645041.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:21.845Z,1516645041.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:22.234Z,1516645042.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:22.647Z,1516645042.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:23.035Z,1516645043.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:23.436Z,1516645043.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:23.839Z,1516645043.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:24.022Z,1516645044.022 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool
2018-01-22T18:17:24.239Z,1516645044.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:24.649Z,1516645044.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:25.052Z,1516645045.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:25.445Z,1516645045.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:25.841Z,1516645045.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:26.219Z,1516645046.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:26.644Z,1516645046.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:27.056Z,1516645047.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:27.460Z,1516645047.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:27.838Z,1516645047.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:28.259Z,1516645048.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:28.641Z,1516645048.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:29.049Z,1516645049.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:29.420Z,1516645049.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x63591 got:0x63260
2018-01-22T18:17:29.449Z,1516645049.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:29.828Z,1516645049.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:30.218Z,1516645050.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x20138 got:0x38526
2018-01-22T18:17:30.244Z,1516645050.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:30.649Z,1516645050.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:31.032Z,1516645051.032 [PNI_TCM](ERROR): CRC does not match. Expected:0x45226 got:0x4372
2018-01-22T18:17:31.056Z,1516645051.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:31.441Z,1516645051.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:31.833Z,1516645051.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:32.239Z,1516645052.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:32.413Z,1516645052.413 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 0.000000 bool
2018-01-22T18:17:32.645Z,1516645052.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:33.033Z,1516645053.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:33.440Z,1516645053.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:33.857Z,1516645053.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:34.266Z,1516645054.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:34.658Z,1516645054.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:35.030Z,1516645055.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:35.440Z,1516645055.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:35.845Z,1516645055.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:36.257Z,1516645056.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:36.649Z,1516645056.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:37.055Z,1516645057.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:37.454Z,1516645057.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:37.844Z,1516645057.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:38.229Z,1516645058.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:38.633Z,1516645058.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:39.037Z,1516645059.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:39.462Z,1516645059.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:39.841Z,1516645059.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:40.261Z,1516645060.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:40.639Z,1516645060.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:41.037Z,1516645061.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:41.440Z,1516645061.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:41.492Z,1516645061.492 [CommandLine](IMPORTANT): got command set NAL9602.platform_communications 1.000000 bool
2018-01-22T18:17:41.854Z,1516645061.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:42.229Z,1516645062.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:42.627Z,1516645062.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:43.037Z,1516645063.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:43.432Z,1516645063.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:43.835Z,1516645063.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:44.244Z,1516645064.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:44.614Z,1516645064.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.017Z,1516645065.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.422Z,1516645065.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.442Z,1516645065.442 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.443Z,1516645065.443 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-01-22T18:17:45.443Z,1516645065.443 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:17:45.446Z,1516645065.446 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.446Z,1516645065.446 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-01-22T18:17:45.446Z,1516645065.446 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:17:45.465Z,1516645065.465 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:17:45.466Z,1516645065.466 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:17:45.831Z,1516645065.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:45.831Z,1516645065.831 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-01-22T18:17:45.831Z,1516645065.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:17:45.857Z,1516645065.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:17:45.857Z,1516645065.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:17:45.858Z,1516645065.858 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-01-22T18:17:45.858Z,1516645065.858 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:17:45.858Z,1516645065.858 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-01-22T18:17:46.255Z,1516645066.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:17:46.255Z,1516645066.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:17:46.256Z,1516645066.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:17:46.256Z,1516645066.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:17:46.256Z,1516645066.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:17:46.257Z,1516645066.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:17:46.288Z,1516645066.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:17:46.288Z,1516645066.288 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-01-22T18:17:46.635Z,1516645066.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:17:46.636Z,1516645066.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:17:46.636Z,1516645066.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:17:49.840Z,1516645069.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:49.979Z,1516645069.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:50.341Z,1516645070.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:50.748Z,1516645070.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:51.128Z,1516645071.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:51.528Z,1516645071.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:51.936Z,1516645071.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:52.328Z,1516645072.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:52.737Z,1516645072.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:53.144Z,1516645073.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:53.559Z,1516645073.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:53.928Z,1516645073.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:54.337Z,1516645074.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:54.729Z,1516645074.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:55.128Z,1516645075.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:55.541Z,1516645075.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:55.942Z,1516645075.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:55.946Z,1516645075.946 [Startup:StartupSatComms:A](INFO): Timed out from 2018-01-22T18:16:55.7Z
2018-01-22T18:17:55.946Z,1516645075.946 [Startup:StartupSatComms:A] Stopped
2018-01-22T18:17:55.946Z,1516645075.946 [Startup:StartupSatComms:B] Running Loop=1
2018-01-22T18:17:56.345Z,1516645076.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:56.349Z,1516645076.349 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-22T18:17:56.836Z,1516645076.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:57.132Z,1516645077.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:57.545Z,1516645077.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:57.924Z,1516645077.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:58.325Z,1516645078.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:58.739Z,1516645078.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:59.151Z,1516645079.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:59.552Z,1516645079.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:17:59.954Z,1516645079.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:03.201Z,1516645083.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:03.285Z,1516645083.285 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T172818/Courier0012.lzma
2018-01-22T18:18:03.357Z,1516645083.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:03.674Z,1516645083.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:04.025Z,1516645084.025 [DataOverHttps](INFO): Moved sent file to Logs/20180122T172818/Courier0012.lzma.bak
2018-01-22T18:18:04.025Z,1516645084.025 [DataOverHttps](INFO): SBD MOMSN=7750600
2018-01-22T18:18:04.097Z,1516645084.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:10.622Z,1516645090.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:10.765Z,1516645090.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:11.707Z,1516645091.707 [CommandLine](IMPORTANT): got command show stack
2018-01-22T18:18:11.707Z,1516645091.707 [CommandLine](IMPORTANT): Behavior Stack:

2018-01-22T18:18:11.708Z,1516645091.708 [Startup](IMPORTANT): Priority 0: Startup:A.GoToSurface
2018-01-22T18:18:11.708Z,1516645091.708 [Startup:StartupSatComms](IMPORTANT): Priority 1: Startup:StartupSatComms:B
2018-01-22T18:18:14.017Z,1516645094.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:14.223Z,1516645094.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:14.491Z,1516645094.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:14.891Z,1516645094.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:15.296Z,1516645095.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:15.695Z,1516645095.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:16.587Z,1516645096.587 [CommandLine](IMPORTANT): got command do
2018-01-22T18:18:16.587Z,1516645096.587 [CommandLine](FAULT): Incomplete syntax. Try: help do
2018-01-22T18:18:18.211Z,1516645098.211 [CommandLine](IMPORTANT): got command ! date
2018-01-22T18:18:18.329Z,1516645098.329 [CommandLine](IMPORTANT): Mon Jan 22 18:18:18 UTC 2018

2018-01-22T18:18:19.131Z,1516645099.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:19.203Z,1516645099.203 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20180122T180533/Courier0000.lzma
2018-01-22T18:18:19.273Z,1516645099.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:19.619Z,1516645099.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:19.969Z,1516645099.969 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0000.lzma.bak
2018-01-22T18:18:19.969Z,1516645099.969 [DataOverHttps](INFO): SBD MOMSN=7750602
2018-01-22T18:18:20.043Z,1516645100.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:20.679Z,1516645100.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:20.800Z,1516645100.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:24.494Z,1516645104.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:24.645Z,1516645104.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:25.021Z,1516645105.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:25.403Z,1516645105.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:25.800Z,1516645105.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:26.280Z,1516645106.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:29.676Z,1516645109.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:29.769Z,1516645109.769 [DataOverHttps](INFO): Sending 641 bytes from file Logs/20180122T172818/Express0013.lzma
2018-01-22T18:18:29.856Z,1516645109.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:30.181Z,1516645110.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:30.521Z,1516645110.521 [DataOverHttps](INFO): Moved sent file to Logs/20180122T172818/Express0013.lzma.bak
2018-01-22T18:18:30.521Z,1516645110.521 [DataOverHttps](INFO): SBD MOMSN=7750608
2018-01-22T18:18:30.593Z,1516645110.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:31.174Z,1516645111.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:31.377Z,1516645111.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:34.651Z,1516645114.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:34.783Z,1516645114.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:35.155Z,1516645115.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:35.590Z,1516645115.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:35.942Z,1516645115.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:36.350Z,1516645116.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:39.560Z,1516645119.560 [CommandLine](IMPORTANT): got command set NAL9602.time_fix 1516645120.000000 second
2018-01-22T18:18:39.679Z,1516645119.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:39.817Z,1516645119.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:40.133Z,1516645120.133 [DataOverHttps](INFO): Sending 1193 bytes from file Logs/20180122T180533/Express0001.lzma
2018-01-22T18:18:40.265Z,1516645120.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:40.577Z,1516645120.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:40.925Z,1516645120.925 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0001.lzma.bak
2018-01-22T18:18:40.925Z,1516645120.925 [DataOverHttps](INFO): SBD MOMSN=7750644
2018-01-22T18:18:40.988Z,1516645120.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:41.577Z,1516645121.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:41.580Z,1516645121.580 [Startup:StartupSatComms:B] Stopped
2018-01-22T18:18:41.580Z,1516645121.580 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-01-22T18:18:41.580Z,1516645121.580 [Startup:StartupSatComms] Stopped
2018-01-22T18:18:41.580Z,1516645121.580 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-01-22T18:18:41.581Z,1516645121.581 [Startup](INFO): Completed Startup
2018-01-22T18:18:41.581Z,1516645121.581 [MissionManager](INFO): Startup is completed.
2018-01-22T18:18:41.581Z,1516645121.581 [MissionManager](INFO): Uninitializing Mission Startup
2018-01-22T18:18:41.581Z,1516645121.581 [Startup] Stopped
2018-01-22T18:18:41.582Z,1516645121.582 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-01-22T18:18:41.582Z,1516645121.582 [Startup:A.GoToSurface] Stopped
2018-01-22T18:18:41.582Z,1516645121.582 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-22T18:18:41.790Z,1516645121.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:41.793Z,1516645121.793 [MissionManager](IMPORTANT): Started mission Science
2018-01-22T18:18:41.793Z,1516645121.793 [Science] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science](DEBUG): Aggregate::initialize Science
2018-01-22T18:18:41.794Z,1516645121.794 [Science:A] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:B] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:C] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:D] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:E] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:F] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:G] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:H] Running Loop=1
2018-01-22T18:18:41.794Z,1516645121.794 [Science:PeakDetectChl] Running Loop=1
2018-01-22T18:18:41.807Z,1516645121.807 [Science:PeakDetectChl](DEBUG): Aggregate::initialize Science:PeakDetectChl
2018-01-22T18:18:41.807Z,1516645121.807 [Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2018-01-22T18:18:41.807Z,1516645121.807 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-01-22T18:18:41.809Z,1516645121.809 [Science:HighestChlPeakReport] Running Loop=1
2018-01-22T18:18:41.809Z,1516645121.809 [Science:HighestChlPeakReport](DEBUG): Aggregate::initialize Science:HighestChlPeakReport
2018-01-22T18:18:41.809Z,1516645121.809 [Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1
2018-01-22T18:18:41.809Z,1516645121.809 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize.
2018-01-22T18:18:41.810Z,1516645121.810 [Science:PeakDetectNO3] Running Loop=1
2018-01-22T18:18:41.810Z,1516645121.810 [Science:PeakDetectNO3](DEBUG): Aggregate::initialize Science:PeakDetectNO3
2018-01-22T18:18:41.810Z,1516645121.810 [Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1
2018-01-22T18:18:41.810Z,1516645121.810 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-01-22T18:18:41.816Z,1516645121.816 [Science:PeakDetectOil] Running Loop=1
2018-01-22T18:18:41.816Z,1516645121.816 [Science:PeakDetectOil](DEBUG): Aggregate::initialize Science:PeakDetectOil
2018-01-22T18:18:41.816Z,1516645121.816 [Science:PeakDetectOil:A.PeakDetectVsDepth] Running Loop=1
2018-01-22T18:18:41.816Z,1516645121.816 [Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectOil] Stopped
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectOil](DEBUG): Aggregate::uninitialize Science:PeakDetectOil
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectOil:A.PeakDetectVsDepth] Stopped
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectNO3] Stopped
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize Science:PeakDetectNO3
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped
2018-01-22T18:18:41.823Z,1516645121.823 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-01-22T18:18:41.823Z,1516645121.823 [Science:HighestChlPeakReport] Stopped
2018-01-22T18:18:41.824Z,1516645121.824 [Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize Science:HighestChlPeakReport
2018-01-22T18:18:41.824Z,1516645121.824 [Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped
2018-01-22T18:18:41.824Z,1516645121.824 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize.
2018-01-22T18:18:41.824Z,1516645121.824 [Science:PeakDetectChl] Stopped
2018-01-22T18:18:41.824Z,1516645121.824 [Science:PeakDetectChl](DEBUG): Aggregate::uninitialize Science:PeakDetectChl
2018-01-22T18:18:41.824Z,1516645121.824 [Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped
2018-01-22T18:18:41.824Z,1516645121.824 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-01-22T18:18:41.824Z,1516645121.824 [Science:H] Running Loop=1
2018-01-22T18:18:41.825Z,1516645121.825 [Science:H](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_petroleum_hydrocarbons_in_sea_water
2018-01-22T18:18:41.835Z,1516645121.835 [Science:G] Running Loop=1
2018-01-22T18:18:41.839Z,1516645121.839 [Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2018-01-22T18:18:41.841Z,1516645121.841 [Science:F] Stopped
2018-01-22T18:18:41.841Z,1516645121.841 [Science:E] Stopped
2018-01-22T18:18:41.841Z,1516645121.841 [Science:D] Running Loop=1
2018-01-22T18:18:41.841Z,1516645121.841 [Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature
2018-01-22T18:18:41.842Z,1516645121.842 [Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity
2018-01-22T18:18:41.844Z,1516645121.844 [Science:C] Running Loop=1
2018-01-22T18:18:41.844Z,1516645121.844 [Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2018-01-22T18:18:41.845Z,1516645121.845 [Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2018-01-22T18:18:41.846Z,1516645121.846 [Science:B] Stopped
2018-01-22T18:18:41.851Z,1516645121.851 [Science:A] Running Loop=1
2018-01-22T18:18:41.851Z,1516645121.851 [Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water
2018-01-22T18:18:42.083Z,1516645122.083 [CTD_Seabird](INFO): Initializing
2018-01-22T18:18:42.084Z,1516645122.084 [CTD_Seabird](INFO): Checking LCM
2018-01-22T18:18:42.084Z,1516645122.084 [CTD_Seabird](INFO): LCM OK
2018-01-22T18:18:42.084Z,1516645122.084 [CTD_Seabird](INFO): Powering up
2018-01-22T18:18:42.217Z,1516645122.217 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=4
2018-01-22T18:18:42.217Z,1516645122.217 [WetLabsBB2FL](INFO): Powering up
2018-01-22T18:18:45.353Z,1516645125.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:45.542Z,1516645125.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:45.857Z,1516645125.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:46.256Z,1516645126.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:46.709Z,1516645126.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:47.057Z,1516645127.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:47.465Z,1516645127.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:47.527Z,1516645127.527 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-22T18:18:47.623Z,1516645127.623 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-01-22T18:18:47.625Z,1516645127.625 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-01-22T18:18:47.896Z,1516645127.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:48.343Z,1516645128.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:48.690Z,1516645128.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:49.054Z,1516645129.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:49.446Z,1516645129.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:49.862Z,1516645129.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:50.108Z,1516645130.108 [CommandLine](IMPORTANT): got command maintain clear
2018-01-22T18:18:50.343Z,1516645130.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:50.384Z,1516645130.384 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-01-22T18:18:50.682Z,1516645130.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:51.123Z,1516645131.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:51.472Z,1516645131.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:51.860Z,1516645131.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:52.384Z,1516645132.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:52.605Z,1516645132.605 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	448		239.848		88.277		22.242		30.628		30.628		38.428		7.800		834.8		859.1		221.9	



2018-01-22T18:18:52.605Z,1516645132.605 [Aanderaa_O2](DEBUG): Error parsing device response
2018-01-22T18:18:52.698Z,1516645132.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:53.055Z,1516645133.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:53.461Z,1516645133.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:53.803Z,1516645133.803 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	448		239.828		88.269		22.241		30.629		30.629		38.429		7.800		834.7		858.0		221.9	



2018-01-22T18:18:53.803Z,1516645133.803 [Aanderaa_O2](DEBUG): Error parsing device response
2018-01-22T18:18:53.861Z,1516645133.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:54.375Z,1516645134.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:54.698Z,1516645134.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:55.002Z,1516645135.002 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	448		239.716		88.227		22.241		30.635		30.635		38.433		7.799		834.6		857.2		221.9	

2018-01-22T18:18:55.003Z,1516645135.003 [Aanderaa_O2](DEBUG): Error parsing device response
2018-01-22T18:18:55.060Z,1516645135.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:55.440Z,1516645135.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:55.873Z,1516645135.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:56.050Z,1516645136.050 [CommandLine](IMPORTANT): got command report touch CTD_Seabird.depth
2018-01-22T18:18:56.326Z,1516645136.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:56.682Z,1516645136.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:57.002Z,1516645137.002 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	448		239.721		88.226		22.239		30.635		30.635		38.432		7.797		834.4		856.1		221.9	

2018-01-22T18:18:57.002Z,1516645137.002 [Aanderaa_O2](DEBUG): Error parsing device response
2018-01-22T18:18:57.072Z,1516645137.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:57.458Z,1516645137.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:57.852Z,1516645137.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:58.254Z,1516645138.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:58.658Z,1516645138.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:59.079Z,1516645139.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:59.440Z,1516645139.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:18:59.864Z,1516645139.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:00.276Z,1516645140.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:00.693Z,1516645140.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:01.060Z,1516645141.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:01.480Z,1516645141.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:01.763Z,1516645141.763 [CommandLine](IMPORTANT): got command get depth
2018-01-22T18:19:01.764Z,1516645141.764 [CommandLine](IMPORTANT): depth 0.000000 m
2018-01-22T18:19:01.861Z,1516645141.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:02.252Z,1516645142.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:02.686Z,1516645142.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:03.083Z,1516645143.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:03.439Z,1516645143.439 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010574 psu
2018-01-22T18:19:03.441Z,1516645143.441 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:03.465Z,1516645143.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:03.525Z,1516645143.525 [Reporter](INFO): CTD_Seabird.depth 68.816902 m
2018-01-22T18:19:03.873Z,1516645143.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:04.218Z,1516645144.218 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010573 psu
2018-01-22T18:19:04.219Z,1516645144.219 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:04.332Z,1516645144.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:04.387Z,1516645144.387 [Reporter](INFO): CTD_Seabird.depth 68.806984 m
2018-01-22T18:19:04.651Z,1516645144.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:05.048Z,1516645145.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:05.420Z,1516645145.420 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010572 psu
2018-01-22T18:19:05.422Z,1516645145.422 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:05.456Z,1516645145.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:05.500Z,1516645145.500 [Reporter](INFO): CTD_Seabird.depth 68.806984 m
2018-01-22T18:19:05.897Z,1516645145.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:06.324Z,1516645146.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:06.620Z,1516645146.620 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010540 psu
2018-01-22T18:19:06.622Z,1516645146.622 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:06.678Z,1516645146.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:06.702Z,1516645146.702 [Reporter](INFO): CTD_Seabird.depth 68.777222 m
2018-01-22T18:19:07.056Z,1516645147.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:07.229Z,1516645147.229 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010297 psu
2018-01-22T18:19:07.231Z,1516645147.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:07.467Z,1516645147.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:07.515Z,1516645147.515 [Reporter](INFO): CTD_Seabird.depth 68.777222 m
2018-01-22T18:19:07.862Z,1516645147.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:08.317Z,1516645148.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:08.432Z,1516645148.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010569 psu
2018-01-22T18:19:08.433Z,1516645148.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:08.650Z,1516645148.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:08.687Z,1516645148.687 [Reporter](INFO): CTD_Seabird.depth 69.432129 m
2018-01-22T18:19:09.070Z,1516645149.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:09.228Z,1516645149.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010568 psu
2018-01-22T18:19:09.231Z,1516645149.231 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:09.471Z,1516645149.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:09.486Z,1516645149.486 [Reporter](INFO): CTD_Seabird.depth 69.074898 m
2018-01-22T18:19:09.842Z,1516645149.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:10.345Z,1516645150.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:10.433Z,1516645150.433 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010599 psu
2018-01-22T18:19:10.435Z,1516645150.435 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:10.647Z,1516645150.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:10.662Z,1516645150.662 [Reporter](INFO): CTD_Seabird.depth 69.521439 m
2018-01-22T18:19:11.056Z,1516645151.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:11.228Z,1516645151.228 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010663 psu
2018-01-22T18:19:11.230Z,1516645151.230 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:11.457Z,1516645151.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:11.472Z,1516645151.472 [Reporter](INFO): CTD_Seabird.depth 69.233673 m
2018-01-22T18:19:11.865Z,1516645151.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:12.276Z,1516645152.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:12.428Z,1516645152.428 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010534 psu
2018-01-22T18:19:12.429Z,1516645152.429 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:12.680Z,1516645152.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:12.695Z,1516645152.695 [Reporter](INFO): CTD_Seabird.depth 69.045135 m
2018-01-22T18:19:13.069Z,1516645153.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:13.449Z,1516645153.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:13.853Z,1516645153.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:14.019Z,1516645154.019 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010564 psu
2018-01-22T18:19:14.022Z,1516645154.022 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:14.273Z,1516645154.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:14.304Z,1516645154.304 [Reporter](INFO): CTD_Seabird.depth 69.035210 m
2018-01-22T18:19:14.704Z,1516645154.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010532 psu
2018-01-22T18:19:14.705Z,1516645154.705 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:14.721Z,1516645154.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:14.761Z,1516645154.761 [Reporter](INFO): CTD_Seabird.depth 69.055061 m
2018-01-22T18:19:15.080Z,1516645155.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:15.468Z,1516645155.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:15.499Z,1516645155.499 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010563 psu
2018-01-22T18:19:15.500Z,1516645155.500 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:15.854Z,1516645155.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:15.889Z,1516645155.889 [Reporter](INFO): CTD_Seabird.depth 69.035210 m
2018-01-22T18:19:16.236Z,1516645156.236 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010561 psu
2018-01-22T18:19:16.237Z,1516645156.237 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:16.321Z,1516645156.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:16.357Z,1516645156.357 [Reporter](INFO): CTD_Seabird.depth 68.995514 m
2018-01-22T18:19:16.690Z,1516645156.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:17.091Z,1516645157.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:17.237Z,1516645157.237 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010560 psu
2018-01-22T18:19:17.239Z,1516645157.239 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:17.456Z,1516645157.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:17.483Z,1516645157.483 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:17.866Z,1516645157.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:18.368Z,1516645158.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:18.440Z,1516645158.440 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010559 psu
2018-01-22T18:19:18.441Z,1516645158.441 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:18.495Z,1516645158.495 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:18.672Z,1516645158.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:19.052Z,1516645159.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:19.461Z,1516645159.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:19.934Z,1516645159.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:20.031Z,1516645160.031 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010558 psu
2018-01-22T18:19:20.032Z,1516645160.032 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:20.339Z,1516645160.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:20.405Z,1516645160.405 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:20.436Z,1516645160.436 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010556 psu
2018-01-22T18:19:20.437Z,1516645160.437 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:20.684Z,1516645160.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:20.716Z,1516645160.716 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:21.081Z,1516645161.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:21.488Z,1516645161.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:21.856Z,1516645161.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:22.027Z,1516645162.027 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010555 psu
2018-01-22T18:19:22.028Z,1516645162.028 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:22.372Z,1516645162.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:22.432Z,1516645162.432 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010554 psu
2018-01-22T18:19:22.433Z,1516645162.433 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:22.441Z,1516645162.441 [Reporter](INFO): CTD_Seabird.depth 69.035210 m
2018-01-22T18:19:22.660Z,1516645162.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:23.049Z,1516645163.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:23.264Z,1516645163.264 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:23.264Z,1516645163.264 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 100.888250 psi
2018-01-22T18:19:23.462Z,1516645163.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:23.876Z,1516645163.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:24.023Z,1516645164.023 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010553 psu
2018-01-22T18:19:24.024Z,1516645164.024 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:24.344Z,1516645164.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:24.380Z,1516645164.380 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:24.428Z,1516645164.428 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010552 psu
2018-01-22T18:19:24.429Z,1516645164.429 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:24.672Z,1516645164.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:24.696Z,1516645164.696 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:25.068Z,1516645165.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:25.461Z,1516645165.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:25.854Z,1516645165.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:26.019Z,1516645166.019 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010551 psu
2018-01-22T18:19:26.020Z,1516645166.020 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:26.376Z,1516645166.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:26.432Z,1516645166.432 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:26.681Z,1516645166.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:26.828Z,1516645166.828 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010549 psu
2018-01-22T18:19:26.829Z,1516645166.829 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:27.070Z,1516645167.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:27.085Z,1516645167.085 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:27.254Z,1516645167.254 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010548 psu
2018-01-22T18:19:27.257Z,1516645167.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:27.464Z,1516645167.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:27.488Z,1516645167.488 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:27.852Z,1516645167.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:28.280Z,1516645168.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:28.720Z,1516645168.720 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010547 psu
2018-01-22T18:19:28.721Z,1516645168.721 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:28.727Z,1516645168.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:28.771Z,1516645168.771 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:29.045Z,1516645169.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:29.256Z,1516645169.256 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010546 psu
2018-01-22T18:19:29.257Z,1516645169.257 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:29.456Z,1516645169.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:29.488Z,1516645169.488 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:29.643Z,1516645169.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:29.884Z,1516645169.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:30.295Z,1516645170.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:30.439Z,1516645170.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:30.734Z,1516645170.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:30.777Z,1516645170.777 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010545 psu
2018-01-22T18:19:30.779Z,1516645170.779 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:30.789Z,1516645170.789 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:30.843Z,1516645170.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:31.052Z,1516645171.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:31.259Z,1516645171.259 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010543 psu
2018-01-22T18:19:31.260Z,1516645171.260 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:31.460Z,1516645171.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:31.487Z,1516645171.487 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:31.639Z,1516645171.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:31.876Z,1516645171.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:31.947Z,1516645171.947 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:31.948Z,1516645171.948 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 100.873747 psi
2018-01-22T18:19:32.343Z,1516645172.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:32.436Z,1516645172.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:32.460Z,1516645172.460 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010542 psu
2018-01-22T18:19:32.461Z,1516645172.461 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:32.663Z,1516645172.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:32.679Z,1516645172.679 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:32.839Z,1516645172.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:33.066Z,1516645173.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:33.478Z,1516645173.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:33.852Z,1516645173.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:34.051Z,1516645174.051 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010541 psu
2018-01-22T18:19:34.052Z,1516645174.052 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:34.353Z,1516645174.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:34.393Z,1516645174.393 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:34.457Z,1516645174.457 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010540 psu
2018-01-22T18:19:34.459Z,1516645174.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:34.663Z,1516645174.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:34.686Z,1516645174.686 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:35.048Z,1516645175.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:35.476Z,1516645175.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:35.860Z,1516645175.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:36.051Z,1516645176.051 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010539 psu
2018-01-22T18:19:36.053Z,1516645176.053 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:36.384Z,1516645176.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:36.457Z,1516645176.457 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010537 psu
2018-01-22T18:19:36.459Z,1516645176.459 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:36.481Z,1516645176.481 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:36.693Z,1516645176.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:37.064Z,1516645177.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:37.327Z,1516645177.327 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:37.328Z,1516645177.328 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 100.873747 psi
2018-01-22T18:19:37.468Z,1516645177.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:37.857Z,1516645177.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:38.051Z,1516645178.051 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010536 psu
2018-01-22T18:19:38.052Z,1516645178.052 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:38.345Z,1516645178.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:38.385Z,1516645178.385 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:38.456Z,1516645178.456 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010535 psu
2018-01-22T18:19:38.458Z,1516645178.458 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:38.681Z,1516645178.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:38.719Z,1516645178.719 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:39.087Z,1516645179.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:39.488Z,1516645179.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:39.656Z,1516645179.656 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010534 psu
2018-01-22T18:19:39.657Z,1516645179.657 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:39.855Z,1516645179.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:39.915Z,1516645179.915 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:40.273Z,1516645180.273 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010533 psu
2018-01-22T18:19:40.275Z,1516645180.275 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:40.292Z,1516645180.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:40.360Z,1516645180.360 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:40.413Z,1516645180.413 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:40.414Z,1516645180.414 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 100.873747 psi
2018-01-22T18:19:40.663Z,1516645180.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:41.048Z,1516645181.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:41.444Z,1516645181.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:41.476Z,1516645181.476 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010532 psu
2018-01-22T18:19:41.477Z,1516645181.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:41.874Z,1516645181.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:41.901Z,1516645181.901 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:42.266Z,1516645182.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:42.750Z,1516645182.750 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010531 psu
2018-01-22T18:19:42.751Z,1516645182.751 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:43.278Z,1516645183.278 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010530 psu
2018-01-22T18:19:43.279Z,1516645183.279 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:43.660Z,1516645183.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:44.455Z,1516645184.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:44.558Z,1516645184.558 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:44.563Z,1516645184.563 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 100.859243 psi
2018-01-22T18:19:44.726Z,1516645184.726 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010529 psu
2018-01-22T18:19:44.727Z,1516645184.727 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:44.859Z,1516645184.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:45.281Z,1516645185.281 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010528 psu
2018-01-22T18:19:45.282Z,1516645185.282 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:45.656Z,1516645185.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:46.451Z,1516645186.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:46.480Z,1516645186.480 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010527 psu
2018-01-22T18:19:46.482Z,1516645186.482 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:46.855Z,1516645186.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:19:47.118Z,1516645187.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:47.133Z,1516645187.133 [Reporter](INFO): CTD_Seabird.depth 69.015366 m
2018-01-22T18:19:47.297Z,1516645187.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:47.607Z,1516645187.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:47.993Z,1516645187.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:48.071Z,1516645188.071 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010526 psu
2018-01-22T18:19:48.072Z,1516645188.072 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:48.429Z,1516645188.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:48.470Z,1516645188.470 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:48.476Z,1516645188.476 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010524 psu
2018-01-22T18:19:48.477Z,1516645188.477 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:48.812Z,1516645188.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:48.847Z,1516645188.847 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:49.204Z,1516645189.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:49.602Z,1516645189.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:50.005Z,1516645190.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:50.067Z,1516645190.067 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010492 psu
2018-01-22T18:19:50.069Z,1516645190.069 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:50.441Z,1516645190.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:50.472Z,1516645190.472 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010491 psu
2018-01-22T18:19:50.473Z,1516645190.473 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:50.478Z,1516645190.478 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:50.796Z,1516645190.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:51.196Z,1516645191.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:51.612Z,1516645191.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:52.016Z,1516645192.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:52.063Z,1516645192.063 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010521 psu
2018-01-22T18:19:52.065Z,1516645192.065 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:52.432Z,1516645192.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:52.463Z,1516645192.463 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:52.468Z,1516645192.468 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010520 psu
2018-01-22T18:19:52.469Z,1516645192.469 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:52.806Z,1516645192.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:52.848Z,1516645192.848 [Reporter](INFO): CTD_Seabird.depth 69.025291 m
2018-01-22T18:19:53.188Z,1516645193.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:53.599Z,1516645193.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:53.668Z,1516645193.668 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010519 psu
2018-01-22T18:19:53.669Z,1516645193.669 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:54.012Z,1516645194.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:54.052Z,1516645194.052 [Reporter](INFO): CTD_Seabird.depth 69.005440 m
2018-01-22T18:19:54.079Z,1516645194.079 [CommandLine](IMPORTANT): got command report clear
2018-01-22T18:19:54.294Z,1516645194.294 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010518 psu
2018-01-22T18:19:54.296Z,1516645194.296 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:54.461Z,1516645194.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:54.818Z,1516645194.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:55.196Z,1516645195.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:55.638Z,1516645195.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:55.887Z,1516645195.887 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010517 psu
2018-01-22T18:19:55.889Z,1516645195.889 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:56.045Z,1516645196.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:56.298Z,1516645196.298 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010516 psu
2018-01-22T18:19:56.300Z,1516645196.300 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:56.433Z,1516645196.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:56.608Z,1516645196.608 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:56.609Z,1516645196.609 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 80.771516 psi
2018-01-22T18:19:56.857Z,1516645196.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:57.179Z,1516645197.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:57.300Z,1516645197.300 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010515 psu
2018-01-22T18:19:57.301Z,1516645197.301 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:57.591Z,1516645197.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:58.024Z,1516645198.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:58.427Z,1516645198.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:58.768Z,1516645198.768 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010483 psu
2018-01-22T18:19:58.769Z,1516645198.769 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:58.901Z,1516645198.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:59.212Z,1516645199.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:19:59.383Z,1516645199.383 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:19:59.384Z,1516645199.384 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 31.400670 psi
2018-01-22T18:19:59.563Z,1516645199.563 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010514 psu
2018-01-22T18:19:59.565Z,1516645199.565 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:19:59.632Z,1516645199.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:00.007Z,1516645200.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:00.304Z,1516645200.304 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010482 psu
2018-01-22T18:20:00.305Z,1516645200.305 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:00.455Z,1516645200.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:00.780Z,1516645200.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:01.205Z,1516645201.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:01.504Z,1516645201.504 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010481 psu
2018-01-22T18:20:01.505Z,1516645201.505 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:01.637Z,1516645201.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:02.029Z,1516645202.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:02.476Z,1516645202.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:02.704Z,1516645202.704 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010481 psu
2018-01-22T18:20:02.706Z,1516645202.706 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:02.829Z,1516645202.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:03.043Z,1516645203.043 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:03.043Z,1516645203.043 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 14.605300 psi
2018-01-22T18:20:03.195Z,1516645203.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:03.338Z,1516645203.338 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010512 psu
2018-01-22T18:20:03.339Z,1516645203.339 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:03.595Z,1516645203.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:04.016Z,1516645204.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:04.443Z,1516645204.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:04.540Z,1516645204.540 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010511 psu
2018-01-22T18:20:04.541Z,1516645204.541 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:04.820Z,1516645204.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:05.216Z,1516645205.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:05.312Z,1516645205.312 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010510 psu
2018-01-22T18:20:05.313Z,1516645205.313 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:05.602Z,1516645205.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:05.910Z,1516645205.910 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:05.910Z,1516645205.910 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 10.573251 psi
2018-01-22T18:20:06.012Z,1516645206.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:06.441Z,1516645206.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:06.512Z,1516645206.512 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010477 psu
2018-01-22T18:20:06.513Z,1516645206.513 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:06.795Z,1516645206.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:07.192Z,1516645207.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:07.604Z,1516645207.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:08.048Z,1516645208.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:08.103Z,1516645208.103 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010508 psu
2018-01-22T18:20:08.105Z,1516645208.105 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:08.508Z,1516645208.508 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010507 psu
2018-01-22T18:20:08.510Z,1516645208.510 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:08.510Z,1516645208.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:08.816Z,1516645208.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:09.192Z,1516645209.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:09.376Z,1516645209.376 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:09.377Z,1516645209.377 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 8.238144 psi
2018-01-22T18:20:09.604Z,1516645209.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:10.000Z,1516645210.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:10.100Z,1516645210.100 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010506 psu
2018-01-22T18:20:10.102Z,1516645210.102 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:10.388Z,1516645210.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:10.504Z,1516645210.504 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010505 psu
2018-01-22T18:20:10.505Z,1516645210.505 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:10.809Z,1516645210.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:11.232Z,1516645211.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:11.602Z,1516645211.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:12.020Z,1516645212.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:12.096Z,1516645212.096 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010472 psu
2018-01-22T18:20:12.098Z,1516645212.098 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:12.384Z,1516645212.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:12.500Z,1516645212.500 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010503 psu
2018-01-22T18:20:12.502Z,1516645212.502 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:12.792Z,1516645212.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:12.836Z,1516645212.836 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:12.836Z,1516645212.836 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 6.280134 psi
2018-01-22T18:20:13.216Z,1516645213.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:13.590Z,1516645213.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:14.001Z,1516645214.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:14.091Z,1516645214.091 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010501 psu
2018-01-22T18:20:14.092Z,1516645214.092 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:14.447Z,1516645214.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:14.496Z,1516645214.496 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010500 psu
2018-01-22T18:20:14.497Z,1516645214.497 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:14.820Z,1516645214.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:15.235Z,1516645215.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:15.620Z,1516645215.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:15.696Z,1516645215.696 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010499 psu
2018-01-22T18:20:15.697Z,1516645215.697 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:15.989Z,1516645215.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:16.328Z,1516645216.328 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010498 psu
2018-01-22T18:20:16.330Z,1516645216.330 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:16.469Z,1516645216.469 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:16.469Z,1516645216.469 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 5.018306 psi
2018-01-22T18:20:16.487Z,1516645216.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:16.799Z,1516645216.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:17.217Z,1516645217.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:17.528Z,1516645217.528 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010465 psu
2018-01-22T18:20:17.529Z,1516645217.529 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:17.629Z,1516645217.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:18.013Z,1516645218.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:18.471Z,1516645218.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:18.728Z,1516645218.728 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010464 psu
2018-01-22T18:20:18.730Z,1516645218.730 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:18.834Z,1516645218.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:19.209Z,1516645219.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:19.336Z,1516645219.336 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010495 psu
2018-01-22T18:20:19.338Z,1516645219.338 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:19.596Z,1516645219.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:19.849Z,1516645219.849 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:19.849Z,1516645219.849 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 4.307621 psi
2018-01-22T18:20:19.990Z,1516645219.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:20.472Z,1516645220.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:20.536Z,1516645220.536 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010462 psu
2018-01-22T18:20:20.537Z,1516645220.537 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:20.807Z,1516645220.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:21.197Z,1516645221.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:21.600Z,1516645221.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:22.004Z,1516645222.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:22.127Z,1516645222.127 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010461 psu
2018-01-22T18:20:22.129Z,1516645222.129 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:22.512Z,1516645222.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:22.532Z,1516645222.532 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010460 psu
2018-01-22T18:20:22.534Z,1516645222.534 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:22.828Z,1516645222.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:23.225Z,1516645223.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:23.594Z,1516645223.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:23.993Z,1516645223.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:24.123Z,1516645224.123 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010459 psu
2018-01-22T18:20:24.125Z,1516645224.125 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:24.414Z,1516645224.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:24.813Z,1516645224.813 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010458 psu
2018-01-22T18:20:24.815Z,1516645224.815 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:24.835Z,1516645224.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:24.872Z,1516645224.872 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:24.873Z,1516645224.873 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 3.002281 psi
2018-01-22T18:20:25.201Z,1516645225.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:25.579Z,1516645225.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:25.611Z,1516645225.611 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010457 psu
2018-01-22T18:20:25.613Z,1516645225.613 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:26.016Z,1516645226.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:26.344Z,1516645226.344 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010456 psu
2018-01-22T18:20:26.345Z,1516645226.345 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:26.443Z,1516645226.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:26.831Z,1516645226.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:27.205Z,1516645227.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:27.345Z,1516645227.345 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010455 psu
2018-01-22T18:20:27.347Z,1516645227.347 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:27.596Z,1516645227.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:27.991Z,1516645227.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:28.510Z,1516645228.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:28.548Z,1516645228.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010455 psu
2018-01-22T18:20:28.550Z,1516645228.550 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:28.816Z,1516645228.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:29.230Z,1516645229.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:29.624Z,1516645229.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:29.896Z,1516645229.896 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:29.897Z,1516645229.897 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 1.667934 psi
2018-01-22T18:20:29.987Z,1516645229.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:30.139Z,1516645230.139 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010454 psu
2018-01-22T18:20:30.140Z,1516645230.140 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:30.469Z,1516645230.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:30.548Z,1516645230.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010453 psu
2018-01-22T18:20:30.553Z,1516645230.553 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:30.808Z,1516645230.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:31.193Z,1516645231.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:31.608Z,1516645231.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:32.001Z,1516645232.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:32.143Z,1516645232.143 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010452 psu
2018-01-22T18:20:32.144Z,1516645232.144 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:32.481Z,1516645232.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:32.549Z,1516645232.549 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010483 psu
2018-01-22T18:20:32.556Z,1516645232.556 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:32.841Z,1516645232.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:33.200Z,1516645233.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:33.613Z,1516645233.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:33.707Z,1516645233.707 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:33.708Z,1516645233.708 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 1.058775 psi
2018-01-22T18:20:34.002Z,1516645234.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:34.147Z,1516645234.147 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010451 psu
2018-01-22T18:20:34.148Z,1516645234.148 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:34.467Z,1516645234.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:34.553Z,1516645234.553 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010450 psu
2018-01-22T18:20:34.554Z,1516645234.554 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:34.820Z,1516645234.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:35.195Z,1516645235.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:35.623Z,1516645235.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:36.011Z,1516645236.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:36.143Z,1516645236.143 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010449 psu
2018-01-22T18:20:36.145Z,1516645236.145 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:36.405Z,1516645236.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:36.548Z,1516645236.548 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010448 psu
2018-01-22T18:20:36.549Z,1516645236.549 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:36.839Z,1516645236.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:37.201Z,1516645237.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:37.579Z,1516645237.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:38.011Z,1516645238.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:38.139Z,1516645238.139 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010447 psu
2018-01-22T18:20:38.140Z,1516645238.140 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:38.400Z,1516645238.400 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:38.401Z,1516645238.401 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.725189 psi
2018-01-22T18:20:38.449Z,1516645238.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:38.544Z,1516645238.544 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010478 psu
2018-01-22T18:20:38.546Z,1516645238.546 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:38.832Z,1516645238.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:39.196Z,1516645239.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:39.610Z,1516645239.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:39.985Z,1516645239.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:40.135Z,1516645240.135 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010477 psu
2018-01-22T18:20:40.137Z,1516645240.137 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:40.421Z,1516645240.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:40.540Z,1516645240.540 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010475 psu
2018-01-22T18:20:40.541Z,1516645240.541 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:40.841Z,1516645240.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:41.232Z,1516645241.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:41.604Z,1516645241.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:41.872Z,1516645241.872 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:41.873Z,1516645241.873 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.609158 psi
2018-01-22T18:20:41.000Z,1516645242.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:42.131Z,1516645242.131 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010474 psu
2018-01-22T18:20:42.133Z,1516645242.133 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:42.492Z,1516645242.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:42.536Z,1516645242.536 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010441 psu
2018-01-22T18:20:42.537Z,1516645242.537 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:43.737Z,1516645243.737 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010440 psu
2018-01-22T18:20:43.739Z,1516645243.739 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:44.372Z,1516645244.372 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010439 psu
2018-01-22T18:20:44.373Z,1516645244.373 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:45.572Z,1516645245.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010438 psu
2018-01-22T18:20:45.573Z,1516645245.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:45.710Z,1516645245.710 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:45.715Z,1516645245.715 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.536640 psi
2018-01-22T18:20:46.773Z,1516645246.773 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010437 psu
2018-01-22T18:20:46.776Z,1516645246.776 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:47.232Z,1516645247.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:47.232Z,1516645247.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-01-22T18:20:47.233Z,1516645247.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:20:47.239Z,1516645247.239 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:47.239Z,1516645247.239 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-01-22T18:20:47.239Z,1516645247.239 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:20:47.241Z,1516645247.241 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:47.241Z,1516645247.241 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-01-22T18:20:47.241Z,1516645247.241 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:20:47.294Z,1516645247.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:20:47.294Z,1516645247.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:20:47.294Z,1516645247.294 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:20:47.295Z,1516645247.295 [CBIT](INFO): Clearing failed state for component DropWeight
2018-01-22T18:20:47.295Z,1516645247.295 [DropWeight] No Fault, FailCount= 1
2018-01-22T18:20:47.377Z,1516645247.377 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010436 psu
2018-01-22T18:20:47.378Z,1516645247.378 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:47.478Z,1516645247.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:20:47.478Z,1516645247.478 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-01-22T18:20:47.489Z,1516645247.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:20:47.489Z,1516645247.489 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-01-22T18:20:47.490Z,1516645247.490 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:20:47.490Z,1516645247.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-01-22T18:20:47.832Z,1516645247.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:20:47.833Z,1516645247.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:20:47.834Z,1516645247.834 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:20:47.834Z,1516645247.834 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:20:47.851Z,1516645247.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:20:47.852Z,1516645247.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:20:47.852Z,1516645247.852 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:20:47.853Z,1516645247.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:20:47.854Z,1516645247.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:20:48.209Z,1516645248.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:48.576Z,1516645248.576 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010467 psu
2018-01-22T18:20:48.577Z,1516645248.577 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:48.648Z,1516645248.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:48.989Z,1516645248.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:49.245Z,1516645249.245 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:49.245Z,1516645249.245 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.522136 psi
2018-01-22T18:20:49.408Z,1516645249.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:49.813Z,1516645249.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:50.167Z,1516645250.167 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010466 psu
2018-01-22T18:20:50.169Z,1516645250.169 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:50.180Z,1516645250.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:50.570Z,1516645250.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:50.572Z,1516645250.572 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010433 psu
2018-01-22T18:20:50.573Z,1516645250.573 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:50.985Z,1516645250.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:51.404Z,1516645251.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:51.780Z,1516645251.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:52.163Z,1516645252.163 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010432 psu
2018-01-22T18:20:52.165Z,1516645252.165 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:52.175Z,1516645252.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:52.568Z,1516645252.568 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010431 psu
2018-01-22T18:20:52.570Z,1516645252.570 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:52.581Z,1516645252.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:52.985Z,1516645252.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:53.415Z,1516645253.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:53.784Z,1516645253.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:54.159Z,1516645254.159 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010430 psu
2018-01-22T18:20:54.160Z,1516645254.160 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:54.232Z,1516645254.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:54.564Z,1516645254.564 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010429 psu
2018-01-22T18:20:54.566Z,1516645254.566 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:54.645Z,1516645254.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:54.851Z,1516645254.851 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:20:54.852Z,1516645254.852 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.493128 psi
2018-01-22T18:20:55.004Z,1516645255.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:55.425Z,1516645255.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:55.784Z,1516645255.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:56.155Z,1516645256.155 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010429 psu
2018-01-22T18:20:56.157Z,1516645256.157 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:56.182Z,1516645256.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:56.561Z,1516645256.561 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010428 psu
2018-01-22T18:20:56.562Z,1516645256.562 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:56.628Z,1516645256.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:57.007Z,1516645257.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:57.408Z,1516645257.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:57.764Z,1516645257.764 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010427 psu
2018-01-22T18:20:57.766Z,1516645257.766 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:57.821Z,1516645257.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:58.184Z,1516645258.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:58.393Z,1516645258.393 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010426 psu
2018-01-22T18:20:58.395Z,1516645258.395 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:58.572Z,1516645258.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:59.007Z,1516645259.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:59.409Z,1516645259.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:20:59.597Z,1516645259.597 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010426 psu
2018-01-22T18:20:59.600Z,1516645259.600 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:20:59.785Z,1516645259.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:00.186Z,1516645260.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:00.593Z,1516645260.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:00.688Z,1516645260.688 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:21:00.689Z,1516645260.689 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.493128 psi
2018-01-22T18:21:00.802Z,1516645260.802 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010425 psu
2018-01-22T18:21:00.803Z,1516645260.803 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:00.984Z,1516645260.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:01.398Z,1516645261.398 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010424 psu
2018-01-22T18:21:01.399Z,1516645261.399 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:01.412Z,1516645261.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:01.779Z,1516645261.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:02.205Z,1516645262.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:02.581Z,1516645262.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:02.600Z,1516645262.600 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010455 psu
2018-01-22T18:21:02.601Z,1516645262.601 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:02.990Z,1516645262.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:03.444Z,1516645263.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:03.797Z,1516645263.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:04.191Z,1516645264.191 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010423 psu
2018-01-22T18:21:04.193Z,1516645264.193 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:04.212Z,1516645264.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:04.601Z,1516645264.601 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010422 psu
2018-01-22T18:21:04.602Z,1516645264.602 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:04.611Z,1516645264.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:04.984Z,1516645264.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:05.400Z,1516645265.400 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:21:05.401Z,1516645265.401 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.493128 psi
2018-01-22T18:21:05.410Z,1516645265.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:05.790Z,1516645265.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:06.196Z,1516645266.196 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010421 psu
2018-01-22T18:21:06.198Z,1516645266.198 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:06.217Z,1516645266.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:06.588Z,1516645266.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:06.600Z,1516645266.600 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010420 psu
2018-01-22T18:21:06.601Z,1516645266.601 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:06.992Z,1516645266.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:07.375Z,1516645267.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:07.787Z,1516645267.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:08.178Z,1516645268.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:08.192Z,1516645268.192 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010419 psu
2018-01-22T18:21:08.194Z,1516645268.194 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:08.580Z,1516645268.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:08.596Z,1516645268.596 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010419 psu
2018-01-22T18:21:08.597Z,1516645268.597 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:09.012Z,1516645269.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:09.434Z,1516645269.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:09.801Z,1516645269.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:10.187Z,1516645270.187 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010450 psu
2018-01-22T18:21:10.189Z,1516645270.189 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:10.205Z,1516645270.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:10.584Z,1516645270.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:10.592Z,1516645270.592 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010418 psu
2018-01-22T18:21:10.593Z,1516645270.593 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:10.980Z,1516645270.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:11.100Z,1516645271.100 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:21:11.101Z,1516645271.101 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.478625 psi
2018-01-22T18:21:11.421Z,1516645271.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:11.792Z,1516645271.792 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010417 psu
2018-01-22T18:21:11.794Z,1516645271.794 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:11.797Z,1516645271.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:12.196Z,1516645272.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:12.415Z,1516645272.415 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010416 psu
2018-01-22T18:21:12.416Z,1516645272.416 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:12.589Z,1516645272.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:12.969Z,1516645272.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:13.422Z,1516645273.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:13.616Z,1516645273.616 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010415 psu
2018-01-22T18:21:13.617Z,1516645273.617 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:13.792Z,1516645273.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:14.177Z,1516645274.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:14.576Z,1516645274.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:14.816Z,1516645274.816 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010415 psu
2018-01-22T18:21:14.818Z,1516645274.818 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:15.008Z,1516645275.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:15.421Z,1516645275.421 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010414 psu
2018-01-22T18:21:15.424Z,1516645275.424 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:15.434Z,1516645275.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:15.797Z,1516645275.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:16.184Z,1516645276.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:16.624Z,1516645276.624 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010414 psu
2018-01-22T18:21:16.625Z,1516645276.625 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:16.633Z,1516645276.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:16.981Z,1516645276.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:17.438Z,1516645277.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:17.777Z,1516645277.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x20883 got:0x4867
2018-01-22T18:21:17.801Z,1516645277.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:18.196Z,1516645278.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:18.215Z,1516645278.215 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010413 psu
2018-01-22T18:21:18.216Z,1516645278.216 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:18.227Z,1516645278.227 [CommandLine](IMPORTANT): got command get CTD_Seabird.sea_water_pressure pound_per_square_inch
2018-01-22T18:21:18.228Z,1516645278.228 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure 0.493128 psi
2018-01-22T18:21:18.625Z,1516645278.625 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010445 psu
2018-01-22T18:21:18.626Z,1516645278.626 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:18.635Z,1516645278.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:18.988Z,1516645278.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:19.364Z,1516645279.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x55350 got:0x39196
2018-01-22T18:21:19.404Z,1516645279.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:19.793Z,1516645279.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:20.175Z,1516645280.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:20.215Z,1516645280.215 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010412 psu
2018-01-22T18:21:20.217Z,1516645280.217 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:20.588Z,1516645280.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:20.620Z,1516645280.620 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010411 psu
2018-01-22T18:21:20.621Z,1516645280.621 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:20.992Z,1516645280.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:21.440Z,1516645281.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:21.798Z,1516645281.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:22.191Z,1516645282.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:22.211Z,1516645282.211 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010410 psu
2018-01-22T18:21:22.212Z,1516645282.212 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:22.582Z,1516645282.582 [PNI_TCM](ERROR): CRC does not match. Expected:0x14637 got:0x5305
2018-01-22T18:21:22.608Z,1516645282.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:22.616Z,1516645282.616 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010409 psu
2018-01-22T18:21:22.617Z,1516645282.617 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:23.000Z,1516645283.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:23.387Z,1516645283.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:23.790Z,1516645283.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:23.811Z,1516645283.811 [CommandLine](IMPORTANT): got command stop
2018-01-22T18:21:23.812Z,1516645283.812 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-01-22T18:21:24.207Z,1516645284.207 [CTD_Seabird](ERROR): Salinity reading out of range: 0.010408 psu
2018-01-22T18:21:24.209Z,1516645284.209 [CTD_Seabird](INFO): some bad data, not updating bins
2018-01-22T18:21:24.244Z,1516645284.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:24.248Z,1516645284.248 [MissionManager](INFO): MissionManager is completed.
2018-01-22T18:21:24.249Z,1516645284.249 [MissionManager](INFO): Uninitializing Mission Science
2018-01-22T18:21:24.249Z,1516645284.249 [Science] Stopped
2018-01-22T18:21:24.249Z,1516645284.249 [Science](DEBUG): Aggregate::uninitialize Science
2018-01-22T18:21:24.249Z,1516645284.249 [Science:A] Stopped
2018-01-22T18:21:24.249Z,1516645284.249 [Science:C] Stopped
2018-01-22T18:21:24.249Z,1516645284.249 [Science:D] Stopped
2018-01-22T18:21:24.249Z,1516645284.249 [Science:G] Stopped
2018-01-22T18:21:24.249Z,1516645284.249 [Science:H] Stopped
2018-01-22T18:21:24.481Z,1516645284.481 [WetLabsBB2FL](INFO): Powering down
2018-01-22T18:21:24.676Z,1516645284.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:24.688Z,1516645284.688 [MissionManager](IMPORTANT): Started mission Default
2018-01-22T18:21:24.688Z,1516645284.688 [Default] Running Loop=1
2018-01-22T18:21:24.688Z,1516645284.688 [Default](DEBUG): Aggregate::initialize Default
2018-01-22T18:21:24.689Z,1516645284.689 [Default:B.GoToSurface] Running Loop=1
2018-01-22T18:21:24.689Z,1516645284.689 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-01-22T18:21:24.689Z,1516645284.689 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-01-22T18:21:24.689Z,1516645284.689 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-01-22T18:21:24.690Z,1516645284.690 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-01-22T18:21:24.690Z,1516645284.690 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-01-22T18:21:24.695Z,1516645284.695 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-01-22T18:21:24.696Z,1516645284.696 [Default:A.Wait] Running Loop=1
2018-01-22T18:21:24.696Z,1516645284.696 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-01-22T18:21:24.842Z,1516645284.842 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-22T18:21:24.842Z,1516645284.842 [CTD_Seabird](INFO): Powering down
2018-01-22T18:21:25.043Z,1516645285.043 [Aanderaa_O2](INFO): Powering down
2018-01-22T18:21:25.101Z,1516645285.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:25.388Z,1516645285.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:25.783Z,1516645285.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:26.177Z,1516645286.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:26.594Z,1516645286.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:26.989Z,1516645286.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:27.389Z,1516645287.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:27.804Z,1516645287.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:28.173Z,1516645288.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:28.596Z,1516645288.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:28.973Z,1516645288.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:29.372Z,1516645289.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:29.803Z,1516645289.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:30.197Z,1516645290.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:30.598Z,1516645290.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:30.988Z,1516645290.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:31.368Z,1516645291.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:31.802Z,1516645291.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:32.181Z,1516645292.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:32.617Z,1516645292.617 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:21:32.617Z,1516645292.617 [BPC1] Communications Fault, FailCount= 3
2018-01-22T18:21:32.617Z,1516645292.617 [BPC1](ERROR): Communications Fault
2018-01-22T18:21:32.644Z,1516645292.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:32.662Z,1516645292.662 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:21:32.979Z,1516645292.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:33.376Z,1516645293.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:33.787Z,1516645293.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:33.812Z,1516645293.812 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:21:33.812Z,1516645293.812 [BPC1] No Fault, FailCount= 3
2018-01-22T18:21:33.836Z,1516645293.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:34.224Z,1516645294.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:34.569Z,1516645294.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:34.631Z,1516645294.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:34.982Z,1516645294.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:35.386Z,1516645295.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:35.780Z,1516645295.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:36.170Z,1516645296.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:36.577Z,1516645296.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:36.982Z,1516645296.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:37.370Z,1516645297.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:37.782Z,1516645297.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:37.785Z,1516645297.785 [Default:A.Wait](INFO): Done Waiting.
2018-01-22T18:21:37.785Z,1516645297.785 [Default:A.Wait] Stopped
2018-01-22T18:21:37.785Z,1516645297.785 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T18:21:38.190Z,1516645298.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:38.202Z,1516645298.202 [Default:CheckIn] Running Loop=1
2018-01-22T18:21:38.202Z,1516645298.202 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T18:21:38.202Z,1516645298.202 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T18:21:38.591Z,1516645298.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:38.594Z,1516645298.594 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-01-22T18:21:38.972Z,1516645298.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:39.374Z,1516645299.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:39.777Z,1516645299.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:40.186Z,1516645300.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:40.588Z,1516645300.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:40.980Z,1516645300.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:41.372Z,1516645301.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:41.785Z,1516645301.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:42.184Z,1516645302.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:42.594Z,1516645302.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:45.841Z,1516645305.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:45.971Z,1516645305.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:46.326Z,1516645306.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:46.747Z,1516645306.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:47.123Z,1516645307.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:47.528Z,1516645307.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:47.900Z,1516645307.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:48.304Z,1516645308.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:48.708Z,1516645308.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:49.140Z,1516645309.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:49.531Z,1516645309.531 [BPC1](INFO): Initialized
2018-01-22T18:21:49.541Z,1516645309.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:49.913Z,1516645309.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:50.079Z,1516645310.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:50.296Z,1516645310.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:50.712Z,1516645310.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:50.877Z,1516645310.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:51.136Z,1516645311.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:51.287Z,1516645311.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:51.512Z,1516645311.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:51.913Z,1516645311.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:52.083Z,1516645312.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:52.313Z,1516645312.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:52.716Z,1516645312.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:52.879Z,1516645312.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:53.106Z,1516645313.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:53.283Z,1516645313.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:21:53.505Z,1516645313.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:53.911Z,1516645313.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:54.307Z,1516645314.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:54.705Z,1516645314.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:55.114Z,1516645315.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:55.513Z,1516645315.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:55.913Z,1516645315.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:56.312Z,1516645316.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:56.712Z,1516645316.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:57.113Z,1516645317.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:57.510Z,1516645317.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:57.914Z,1516645317.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:58.314Z,1516645318.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:58.716Z,1516645318.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:59.112Z,1516645319.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:59.507Z,1516645319.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:21:59.908Z,1516645319.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:00.309Z,1516645320.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:00.720Z,1516645320.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:01.124Z,1516645321.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:01.524Z,1516645321.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:01.920Z,1516645321.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:02.307Z,1516645322.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:02.708Z,1516645322.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:03.112Z,1516645323.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:03.519Z,1516645323.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:03.917Z,1516645323.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:04.316Z,1516645324.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:04.724Z,1516645324.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:05.115Z,1516645325.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:05.508Z,1516645325.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:05.908Z,1516645325.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:06.316Z,1516645326.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:06.716Z,1516645326.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:07.127Z,1516645327.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:07.521Z,1516645327.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:07.925Z,1516645327.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:08.310Z,1516645328.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:08.707Z,1516645328.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:09.112Z,1516645329.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:09.515Z,1516645329.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:09.920Z,1516645329.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:10.324Z,1516645330.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:10.724Z,1516645330.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:11.110Z,1516645331.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:11.508Z,1516645331.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:11.919Z,1516645331.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:12.312Z,1516645332.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:12.720Z,1516645332.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:13.121Z,1516645333.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:13.528Z,1516645333.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:13.920Z,1516645333.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:14.310Z,1516645334.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:14.712Z,1516645334.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:15.115Z,1516645335.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:15.516Z,1516645335.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:15.924Z,1516645335.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:16.324Z,1516645336.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:16.721Z,1516645336.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:17.107Z,1516645337.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:17.513Z,1516645337.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:17.920Z,1516645337.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:18.316Z,1516645338.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:18.714Z,1516645338.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:19.128Z,1516645339.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:19.528Z,1516645339.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:19.928Z,1516645339.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:20.310Z,1516645340.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:20.709Z,1516645340.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:21.113Z,1516645341.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:21.521Z,1516645341.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:21.921Z,1516645341.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:22.322Z,1516645342.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:22.728Z,1516645342.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:23.179Z,1516645343.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:23.502Z,1516645343.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:23.933Z,1516645343.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:24.314Z,1516645344.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:24.740Z,1516645344.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:25.155Z,1516645345.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:25.554Z,1516645345.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:25.948Z,1516645345.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:26.317Z,1516645346.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:26.741Z,1516645346.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:27.116Z,1516645347.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:27.545Z,1516645347.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:27.972Z,1516645347.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:28.325Z,1516645348.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:28.776Z,1516645348.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:29.125Z,1516645349.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:29.537Z,1516645349.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:29.951Z,1516645349.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:30.337Z,1516645350.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:30.733Z,1516645350.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:31.137Z,1516645351.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:31.548Z,1516645351.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:31.968Z,1516645351.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:32.327Z,1516645352.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:32.728Z,1516645352.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:33.129Z,1516645353.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:33.549Z,1516645353.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:33.940Z,1516645353.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:34.364Z,1516645354.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:34.734Z,1516645354.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:35.120Z,1516645355.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:35.497Z,1516645355.497 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-22T18:22:35.528Z,1516645355.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:35.924Z,1516645355.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:36.320Z,1516645356.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:36.721Z,1516645356.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:37.132Z,1516645357.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:37.525Z,1516645357.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:37.926Z,1516645357.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:38.326Z,1516645358.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:38.705Z,1516645358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:39.124Z,1516645359.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:39.511Z,1516645359.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:39.937Z,1516645359.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:40.340Z,1516645360.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:40.717Z,1516645360.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:41.120Z,1516645361.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:41.528Z,1516645361.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:41.907Z,1516645361.907 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-22T18:22:41.928Z,1516645361.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:42.320Z,1516645362.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:42.734Z,1516645362.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:45.939Z,1516645365.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:46.084Z,1516645366.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:46.434Z,1516645366.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:46.830Z,1516645366.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:47.226Z,1516645367.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:47.628Z,1516645367.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:48.034Z,1516645368.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:48.433Z,1516645368.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:48.846Z,1516645368.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:49.230Z,1516645369.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:49.630Z,1516645369.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:50.037Z,1516645370.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:50.429Z,1516645370.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:50.823Z,1516645370.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:51.242Z,1516645371.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:51.641Z,1516645371.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:52.040Z,1516645372.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:52.428Z,1516645372.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:52.828Z,1516645372.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:53.236Z,1516645373.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:53.629Z,1516645373.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:54.039Z,1516645374.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:54.438Z,1516645374.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:54.894Z,1516645374.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:55.239Z,1516645375.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:55.630Z,1516645375.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:56.027Z,1516645376.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:56.432Z,1516645376.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:56.827Z,1516645376.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:57.242Z,1516645377.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:57.648Z,1516645377.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:58.041Z,1516645378.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:58.432Z,1516645378.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:58.835Z,1516645378.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:59.240Z,1516645379.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:22:59.632Z,1516645379.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:00.041Z,1516645380.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:00.440Z,1516645380.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:00.861Z,1516645380.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:01.238Z,1516645381.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:01.632Z,1516645381.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:02.027Z,1516645382.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:02.435Z,1516645382.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:02.832Z,1516645382.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:03.243Z,1516645383.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:03.641Z,1516645383.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:04.040Z,1516645384.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:04.449Z,1516645384.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:04.825Z,1516645384.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:05.223Z,1516645385.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:05.632Z,1516645385.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:06.060Z,1516645386.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:06.429Z,1516645386.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:06.853Z,1516645386.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:07.231Z,1516645387.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:07.628Z,1516645387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:08.130Z,1516645388.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:08.423Z,1516645388.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:08.836Z,1516645388.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:09.237Z,1516645389.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:09.633Z,1516645389.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:10.033Z,1516645390.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:10.432Z,1516645390.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:10.826Z,1516645390.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:11.229Z,1516645391.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:11.635Z,1516645391.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:12.037Z,1516645392.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:12.444Z,1516645392.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:12.836Z,1516645392.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:13.238Z,1516645393.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:13.636Z,1516645393.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:14.044Z,1516645394.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:14.440Z,1516645394.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:14.829Z,1516645394.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:15.253Z,1516645395.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:15.641Z,1516645395.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:16.052Z,1516645396.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:16.434Z,1516645396.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:16.840Z,1516645396.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:17.237Z,1516645397.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:17.633Z,1516645397.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:18.038Z,1516645398.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:18.439Z,1516645398.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:18.852Z,1516645398.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:19.228Z,1516645399.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:19.631Z,1516645399.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:20.042Z,1516645400.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:20.443Z,1516645400.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:20.824Z,1516645400.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:21.250Z,1516645401.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:21.645Z,1516645401.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:22.043Z,1516645402.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:22.424Z,1516645402.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:22.824Z,1516645402.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:23.232Z,1516645403.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:23.627Z,1516645403.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:24.044Z,1516645404.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:24.440Z,1516645404.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:24.844Z,1516645404.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:25.236Z,1516645405.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:25.635Z,1516645405.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:26.037Z,1516645406.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:26.439Z,1516645406.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:26.837Z,1516645406.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:27.248Z,1516645407.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:27.652Z,1516645407.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:28.048Z,1516645408.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:28.440Z,1516645408.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:28.819Z,1516645408.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:29.224Z,1516645409.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:29.625Z,1516645409.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:30.053Z,1516645410.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:30.444Z,1516645410.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:30.854Z,1516645410.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:31.243Z,1516645411.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:31.626Z,1516645411.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:32.056Z,1516645412.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:32.437Z,1516645412.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:32.829Z,1516645412.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:33.259Z,1516645413.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:33.635Z,1516645413.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:34.033Z,1516645414.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:34.430Z,1516645414.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:34.832Z,1516645414.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:35.236Z,1516645415.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:35.627Z,1516645415.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:36.037Z,1516645416.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:36.441Z,1516645416.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:36.831Z,1516645416.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:37.236Z,1516645417.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:37.631Z,1516645417.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:38.034Z,1516645418.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:38.427Z,1516645418.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:38.832Z,1516645418.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:39.248Z,1516645419.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:39.644Z,1516645419.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:40.039Z,1516645420.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:40.436Z,1516645420.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:40.834Z,1516645420.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:41.235Z,1516645421.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:41.631Z,1516645421.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:42.037Z,1516645422.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:42.450Z,1516645422.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:42.852Z,1516645422.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:46.127Z,1516645426.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:46.256Z,1516645426.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:46.605Z,1516645426.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:47.009Z,1516645427.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:47.406Z,1516645427.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:47.800Z,1516645427.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:48.200Z,1516645428.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:48.200Z,1516645428.200 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-01-22T18:23:48.200Z,1516645428.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:23:48.202Z,1516645428.202 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:48.202Z,1516645428.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-01-22T18:23:48.202Z,1516645428.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:23:48.204Z,1516645428.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:48.204Z,1516645428.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-01-22T18:23:48.204Z,1516645428.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:23:48.215Z,1516645428.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:23:48.216Z,1516645428.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:23:48.216Z,1516645428.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:23:48.627Z,1516645428.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:23:48.628Z,1516645428.628 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-01-22T18:23:48.628Z,1516645428.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:23:48.628Z,1516645428.628 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-01-22T18:23:48.629Z,1516645428.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:23:48.629Z,1516645428.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-01-22T18:23:49.025Z,1516645429.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:23:49.025Z,1516645429.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:23:49.025Z,1516645429.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:23:49.026Z,1516645429.026 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:23:49.026Z,1516645429.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:23:49.027Z,1516645429.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:23:49.027Z,1516645429.027 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:23:49.027Z,1516645429.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:23:49.028Z,1516645429.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:23:49.424Z,1516645429.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:49.820Z,1516645429.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:50.219Z,1516645430.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:50.616Z,1516645430.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:51.106Z,1516645431.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:51.400Z,1516645431.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:51.800Z,1516645431.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:52.224Z,1516645432.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:52.620Z,1516645432.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:53.022Z,1516645433.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:53.400Z,1516645433.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:53.800Z,1516645433.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:54.199Z,1516645434.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:54.600Z,1516645434.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:55.081Z,1516645435.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:55.412Z,1516645435.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:55.812Z,1516645435.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:56.200Z,1516645436.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:56.608Z,1516645436.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:57.007Z,1516645437.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:57.412Z,1516645437.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:57.813Z,1516645437.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:58.208Z,1516645438.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:58.604Z,1516645438.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:59.020Z,1516645439.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:59.413Z,1516645439.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:23:59.813Z,1516645439.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:00.211Z,1516645440.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:00.599Z,1516645440.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:01.016Z,1516645441.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:01.413Z,1516645441.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:01.813Z,1516645441.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:02.206Z,1516645442.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:02.608Z,1516645442.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:03.022Z,1516645443.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:03.420Z,1516645443.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:03.820Z,1516645443.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:04.200Z,1516645444.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:04.604Z,1516645444.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:05.014Z,1516645445.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:05.414Z,1516645445.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:05.813Z,1516645445.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:06.208Z,1516645446.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:06.604Z,1516645446.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:07.020Z,1516645447.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:07.418Z,1516645447.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:07.814Z,1516645447.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:08.220Z,1516645448.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:08.604Z,1516645448.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:09.022Z,1516645449.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:09.414Z,1516645449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:09.818Z,1516645449.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:10.200Z,1516645450.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:10.596Z,1516645450.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:11.010Z,1516645451.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:11.420Z,1516645451.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:11.816Z,1516645451.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:12.203Z,1516645452.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:12.608Z,1516645452.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:13.014Z,1516645453.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:13.418Z,1516645453.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:13.812Z,1516645453.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:14.200Z,1516645454.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:14.607Z,1516645454.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:15.009Z,1516645455.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:15.412Z,1516645455.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:15.813Z,1516645455.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:16.204Z,1516645456.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:16.604Z,1516645456.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:17.013Z,1516645457.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:17.418Z,1516645457.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:17.812Z,1516645457.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:18.203Z,1516645458.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:18.604Z,1516645458.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:19.016Z,1516645459.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:19.418Z,1516645459.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:19.814Z,1516645459.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:20.205Z,1516645460.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:20.607Z,1516645460.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:21.016Z,1516645461.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:21.413Z,1516645461.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:21.826Z,1516645461.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:22.209Z,1516645462.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:22.605Z,1516645462.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:23.016Z,1516645463.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:23.412Z,1516645463.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:23.813Z,1516645463.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:24.212Z,1516645464.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:24.606Z,1516645464.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:25.014Z,1516645465.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:25.432Z,1516645465.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:25.821Z,1516645465.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:26.216Z,1516645466.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:26.596Z,1516645466.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:27.020Z,1516645467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:27.420Z,1516645467.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:27.822Z,1516645467.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:28.197Z,1516645468.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:28.600Z,1516645468.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:29.023Z,1516645469.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:29.419Z,1516645469.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:29.810Z,1516645469.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:30.208Z,1516645470.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:30.604Z,1516645470.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:31.002Z,1516645471.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:31.406Z,1516645471.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:31.806Z,1516645471.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:32.205Z,1516645472.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:32.612Z,1516645472.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:33.004Z,1516645473.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:33.408Z,1516645473.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:33.810Z,1516645473.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:34.212Z,1516645474.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:34.614Z,1516645474.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:35.012Z,1516645475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:35.399Z,1516645475.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:35.799Z,1516645475.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:36.207Z,1516645476.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:36.608Z,1516645476.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:37.006Z,1516645477.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:37.417Z,1516645477.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:37.813Z,1516645477.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:38.212Z,1516645478.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:38.608Z,1516645478.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:39.012Z,1516645479.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:39.407Z,1516645479.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:39.816Z,1516645479.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:40.214Z,1516645480.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:40.624Z,1516645480.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:41.015Z,1516645481.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:41.408Z,1516645481.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:41.793Z,1516645481.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:42.196Z,1516645482.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:42.598Z,1516645482.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:43.018Z,1516645483.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:46.348Z,1516645486.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:46.515Z,1516645486.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:46.876Z,1516645486.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:47.248Z,1516645487.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:47.648Z,1516645487.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:48.050Z,1516645488.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:48.449Z,1516645488.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:48.911Z,1516645488.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:49.252Z,1516645489.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:49.652Z,1516645489.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:50.061Z,1516645490.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:50.459Z,1516645490.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:50.864Z,1516645490.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:51.252Z,1516645491.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:51.650Z,1516645491.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:52.066Z,1516645492.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:52.459Z,1516645492.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:52.858Z,1516645492.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:53.252Z,1516645493.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:53.652Z,1516645493.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:54.059Z,1516645494.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:54.461Z,1516645494.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:54.873Z,1516645494.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:55.252Z,1516645495.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:55.636Z,1516645495.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:56.073Z,1516645496.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:56.465Z,1516645496.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:56.886Z,1516645496.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:57.256Z,1516645497.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:57.639Z,1516645497.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:58.062Z,1516645498.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:58.462Z,1516645498.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:58.896Z,1516645498.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:59.252Z,1516645499.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:24:59.644Z,1516645499.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:00.048Z,1516645500.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:00.450Z,1516645500.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:00.882Z,1516645500.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:01.263Z,1516645501.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:01.656Z,1516645501.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:02.052Z,1516645502.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:02.454Z,1516645502.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:02.956Z,1516645502.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:03.272Z,1516645503.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:03.658Z,1516645503.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:04.070Z,1516645504.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:04.452Z,1516645504.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:04.852Z,1516645504.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:05.272Z,1516645505.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:05.655Z,1516645505.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:06.049Z,1516645506.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:06.466Z,1516645506.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:06.864Z,1516645506.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:07.276Z,1516645507.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:07.649Z,1516645507.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:08.056Z,1516645508.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:08.459Z,1516645508.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:08.906Z,1516645508.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:09.258Z,1516645509.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:09.668Z,1516645509.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:10.068Z,1516645510.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:10.448Z,1516645510.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:10.900Z,1516645510.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:11.260Z,1516645511.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:11.645Z,1516645511.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:12.047Z,1516645512.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:12.464Z,1516645512.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:12.911Z,1516645512.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:13.266Z,1516645513.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:13.653Z,1516645513.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:14.048Z,1516645514.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:14.452Z,1516645514.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:14.899Z,1516645514.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:15.269Z,1516645515.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:15.666Z,1516645515.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:16.072Z,1516645516.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:16.436Z,1516645516.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:16.835Z,1516645516.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:17.261Z,1516645517.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:17.645Z,1516645517.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:18.046Z,1516645518.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:18.458Z,1516645518.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:18.857Z,1516645518.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:19.276Z,1516645519.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:19.660Z,1516645519.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:20.048Z,1516645520.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:20.452Z,1516645520.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:20.848Z,1516645520.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:21.284Z,1516645521.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:21.658Z,1516645521.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:22.062Z,1516645522.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:22.444Z,1516645522.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:22.896Z,1516645522.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:23.246Z,1516645523.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:23.645Z,1516645523.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:24.048Z,1516645524.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:24.454Z,1516645524.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:24.892Z,1516645524.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:25.264Z,1516645525.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:25.649Z,1516645525.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:26.052Z,1516645526.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:26.484Z,1516645526.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:26.917Z,1516645526.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:27.266Z,1516645527.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:27.661Z,1516645527.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:28.059Z,1516645528.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:28.456Z,1516645528.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:28.913Z,1516645528.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:29.242Z,1516645529.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:29.644Z,1516645529.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:30.044Z,1516645530.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:30.471Z,1516645530.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:30.854Z,1516645530.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:31.253Z,1516645531.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:31.643Z,1516645531.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:32.045Z,1516645532.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:32.447Z,1516645532.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:32.852Z,1516645532.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:33.283Z,1516645533.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:33.664Z,1516645533.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:34.057Z,1516645534.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:34.448Z,1516645534.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:34.844Z,1516645534.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:35.270Z,1516645535.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:35.644Z,1516645535.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:36.048Z,1516645536.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:36.457Z,1516645536.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:36.915Z,1516645536.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:37.258Z,1516645537.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:37.652Z,1516645537.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:38.053Z,1516645538.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:38.449Z,1516645538.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:38.904Z,1516645538.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:39.262Z,1516645539.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:39.672Z,1516645539.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:40.065Z,1516645540.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:40.439Z,1516645540.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:40.899Z,1516645540.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:41.251Z,1516645541.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:41.649Z,1516645541.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:42.048Z,1516645542.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:42.457Z,1516645542.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:42.928Z,1516645542.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:42.966Z,1516645542.966 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T18:25:43.259Z,1516645543.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:46.523Z,1516645546.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:46.654Z,1516645546.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:47.020Z,1516645547.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:47.428Z,1516645547.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:47.820Z,1516645547.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:48.212Z,1516645548.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:48.616Z,1516645548.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:49.017Z,1516645549.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:49.425Z,1516645549.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:49.831Z,1516645549.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:50.220Z,1516645550.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:50.618Z,1516645550.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:51.013Z,1516645551.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:51.412Z,1516645551.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:51.811Z,1516645551.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:52.229Z,1516645552.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:52.621Z,1516645552.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:53.021Z,1516645553.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:53.423Z,1516645553.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:53.820Z,1516645553.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:54.202Z,1516645554.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:54.605Z,1516645554.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:55.008Z,1516645555.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:55.428Z,1516645555.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:55.824Z,1516645555.824 [PNI_TCM](ERROR): CRC does not match. Expected:0x60072 got:0x6336
2018-01-22T18:25:55.848Z,1516645555.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:56.227Z,1516645556.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:56.602Z,1516645556.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:57.032Z,1516645557.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:57.427Z,1516645557.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:57.808Z,1516645557.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:58.234Z,1516645558.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:58.631Z,1516645558.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:59.048Z,1516645559.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:59.411Z,1516645559.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:25:59.817Z,1516645559.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:00.229Z,1516645560.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:00.613Z,1516645560.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:01.010Z,1516645561.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:01.409Z,1516645561.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:01.833Z,1516645561.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:02.216Z,1516645562.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:02.610Z,1516645562.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:03.013Z,1516645563.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:03.434Z,1516645563.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:03.817Z,1516645563.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:04.217Z,1516645564.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:04.613Z,1516645564.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:05.044Z,1516645565.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:05.415Z,1516645565.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:05.820Z,1516645565.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:06.213Z,1516645566.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:06.632Z,1516645566.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:07.021Z,1516645567.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:07.422Z,1516645567.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:07.820Z,1516645567.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:08.245Z,1516645568.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:08.613Z,1516645568.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:09.019Z,1516645569.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:09.415Z,1516645569.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:09.812Z,1516645569.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:10.229Z,1516645570.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:10.625Z,1516645570.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:11.028Z,1516645571.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:11.415Z,1516645571.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:11.814Z,1516645571.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:12.232Z,1516645572.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:12.632Z,1516645572.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:13.071Z,1516645573.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:13.422Z,1516645573.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:13.800Z,1516645573.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:14.200Z,1516645574.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:14.599Z,1516645574.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:15.008Z,1516645575.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:15.440Z,1516645575.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:15.816Z,1516645575.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:16.210Z,1516645576.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:16.499Z,1516645576.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:16.604Z,1516645576.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:17.010Z,1516645577.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:17.297Z,1516645577.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:17.405Z,1516645577.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:17.707Z,1516645577.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:17.804Z,1516645577.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:18.221Z,1516645578.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:18.613Z,1516645578.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:19.022Z,1516645579.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:19.408Z,1516645579.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:19.820Z,1516645579.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:20.216Z,1516645580.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:20.630Z,1516645580.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:21.017Z,1516645581.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:21.414Z,1516645581.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:21.800Z,1516645581.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:22.227Z,1516645582.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:22.627Z,1516645582.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:23.028Z,1516645583.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:23.399Z,1516645583.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:23.803Z,1516645583.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:24.214Z,1516645584.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:24.609Z,1516645584.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:25.014Z,1516645585.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:25.403Z,1516645585.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:25.816Z,1516645585.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:26.216Z,1516645586.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:26.616Z,1516645586.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:27.063Z,1516645587.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:27.420Z,1516645587.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:27.808Z,1516645587.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:28.217Z,1516645588.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:28.614Z,1516645588.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:29.016Z,1516645589.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:29.412Z,1516645589.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:29.812Z,1516645589.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:30.221Z,1516645590.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:30.516Z,1516645590.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:30.617Z,1516645590.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:31.017Z,1516645591.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:31.313Z,1516645591.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:31.408Z,1516645591.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:31.719Z,1516645591.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:31.828Z,1516645591.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:32.221Z,1516645592.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:32.620Z,1516645592.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:33.032Z,1516645593.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:33.404Z,1516645593.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:33.816Z,1516645593.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:34.222Z,1516645594.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:34.618Z,1516645594.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:35.033Z,1516645595.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:35.401Z,1516645595.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:35.804Z,1516645595.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:36.216Z,1516645596.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:36.620Z,1516645596.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:37.046Z,1516645597.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:37.412Z,1516645597.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:37.808Z,1516645597.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:38.224Z,1516645598.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:38.235Z,1516645598.235 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T18:21:38.2Z
2018-01-22T18:26:38.235Z,1516645598.235 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T18:26:38.236Z,1516645598.236 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T18:26:38.615Z,1516645598.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:38.619Z,1516645598.619 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-01-22T18:26:39.172Z,1516645599.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:39.420Z,1516645599.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:42.926Z,1516645602.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:43.007Z,1516645603.007 [DataOverHttps](INFO): Sending 145 bytes from file Logs/20180122T180533/Courier0004.lzma
2018-01-22T18:26:43.072Z,1516645603.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:43.427Z,1516645603.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:43.781Z,1516645603.781 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0004.lzma.bak
2018-01-22T18:26:43.781Z,1516645603.781 [DataOverHttps](INFO): SBD MOMSN=7750747
2018-01-22T18:26:43.850Z,1516645603.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:44.461Z,1516645604.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:44.535Z,1516645604.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:44.640Z,1516645604.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:45.333Z,1516645605.333 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:45.767Z,1516645605.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:47.978Z,1516645607.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:48.112Z,1516645608.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:48.464Z,1516645608.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:48.861Z,1516645608.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:49.270Z,1516645609.270 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:49.271Z,1516645609.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-01-22T18:26:49.271Z,1516645609.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:26:49.273Z,1516645609.273 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:49.273Z,1516645609.273 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-01-22T18:26:49.273Z,1516645609.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:26:49.275Z,1516645609.275 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:49.275Z,1516645609.275 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-01-22T18:26:49.275Z,1516645609.275 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:26:49.287Z,1516645609.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:26:49.287Z,1516645609.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:26:49.288Z,1516645609.288 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:26:49.641Z,1516645609.641 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:26:49.641Z,1516645609.641 [BPC1] Communications Fault, FailCount= 4
2018-01-22T18:26:49.641Z,1516645609.641 [BPC1](ERROR): Communications Fault
2018-01-22T18:26:49.687Z,1516645609.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:26:49.687Z,1516645609.687 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-01-22T18:26:49.688Z,1516645609.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:26:49.688Z,1516645609.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-01-22T18:26:49.688Z,1516645609.688 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:26:49.688Z,1516645609.688 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-01-22T18:26:49.689Z,1516645609.689 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:26:52.911Z,1516645612.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:26:52.912Z,1516645612.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:26:52.912Z,1516645612.912 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:26:52.913Z,1516645612.913 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:26:52.913Z,1516645612.913 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:26:52.913Z,1516645612.913 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:26:52.914Z,1516645612.914 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:26:52.914Z,1516645612.914 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:26:52.914Z,1516645612.914 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:26:53.034Z,1516645613.034 [DataOverHttps](INFO): Sending 1085 bytes from file Logs/20180122T180533/Express0005.lzma
2018-01-22T18:26:53.125Z,1516645613.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:53.401Z,1516645613.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:53.426Z,1516645613.426 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:26:53.426Z,1516645613.426 [BPC1] No Fault, FailCount= 4
2018-01-22T18:26:53.741Z,1516645613.741 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0005.lzma.bak
2018-01-22T18:26:53.741Z,1516645613.741 [DataOverHttps](INFO): SBD MOMSN=7750749
2018-01-22T18:26:53.870Z,1516645613.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:54.408Z,1516645614.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:54.411Z,1516645614.411 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T18:26:54.411Z,1516645614.411 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T18:26:54.411Z,1516645614.411 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T18:26:54.547Z,1516645614.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:54.596Z,1516645614.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:55.343Z,1516645615.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:55.747Z,1516645615.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:56.544Z,1516645616.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:57.341Z,1516645617.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:57.783Z,1516645617.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:57.888Z,1516645617.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:58.004Z,1516645618.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:58.377Z,1516645618.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:58.579Z,1516645618.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:58.781Z,1516645618.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:59.176Z,1516645619.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:59.375Z,1516645619.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:59.557Z,1516645619.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:26:59.779Z,1516645619.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:26:59.986Z,1516645619.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:00.356Z,1516645620.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:00.575Z,1516645620.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:00.756Z,1516645620.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:01.172Z,1516645621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:01.371Z,1516645621.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:01.580Z,1516645621.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:01.775Z,1516645621.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:01.980Z,1516645621.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:02.380Z,1516645622.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:02.571Z,1516645622.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:02.768Z,1516645622.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:03.172Z,1516645623.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:03.367Z,1516645623.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:03.565Z,1516645623.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:03.771Z,1516645623.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:03.966Z,1516645623.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:04.377Z,1516645624.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:04.567Z,1516645624.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:04.720Z,1516645624.720 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T18:27:04.721Z,1516645624.721 [NAL9602] Data Fault, FailCount= 2
2018-01-22T18:27:04.721Z,1516645624.721 [NAL9602](ERROR): Data Fault
2018-01-22T18:27:04.787Z,1516645624.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:04.807Z,1516645624.807 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T18:27:05.128Z,1516645625.128 [NAL9602](INFO): Powering down
2018-01-22T18:27:05.180Z,1516645625.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:05.363Z,1516645625.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:05.574Z,1516645625.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:05.767Z,1516645625.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:05.975Z,1516645625.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:05.987Z,1516645625.987 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T18:27:05.988Z,1516645625.988 [NAL9602] No Fault, FailCount= 2
2018-01-22T18:27:06.367Z,1516645626.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:06.563Z,1516645626.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:06.751Z,1516645626.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:07.150Z,1516645627.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:07.361Z,1516645627.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:07.577Z,1516645627.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:07.767Z,1516645627.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:07.951Z,1516645627.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:08.355Z,1516645628.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:08.564Z,1516645628.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:08.751Z,1516645628.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:09.187Z,1516645629.187 [BPC1](INFO): Initialized
2018-01-22T18:27:09.196Z,1516645629.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:09.359Z,1516645629.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:09.564Z,1516645629.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:09.763Z,1516645629.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:09.955Z,1516645629.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:10.363Z,1516645630.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:10.559Z,1516645630.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:10.765Z,1516645630.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:11.168Z,1516645631.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:11.357Z,1516645631.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:11.563Z,1516645631.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:11.787Z,1516645631.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:11.966Z,1516645631.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:12.364Z,1516645632.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:12.583Z,1516645632.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:12.764Z,1516645632.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:13.166Z,1516645633.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:13.381Z,1516645633.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:13.568Z,1516645633.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:13.787Z,1516645633.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:13.964Z,1516645633.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:14.363Z,1516645634.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:14.585Z,1516645634.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:14.761Z,1516645634.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:15.164Z,1516645635.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:15.379Z,1516645635.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:15.585Z,1516645635.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:15.783Z,1516645635.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:15.961Z,1516645635.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:16.367Z,1516645636.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:16.579Z,1516645636.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:16.764Z,1516645636.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:17.168Z,1516645637.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:17.375Z,1516645637.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:17.624Z,1516645637.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:17.779Z,1516645637.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:17.972Z,1516645637.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:18.379Z,1516645638.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:18.575Z,1516645638.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:18.776Z,1516645638.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:19.163Z,1516645639.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:19.371Z,1516645639.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:19.588Z,1516645639.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:19.775Z,1516645639.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:19.960Z,1516645639.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:20.360Z,1516645640.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:20.571Z,1516645640.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:20.760Z,1516645640.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:21.168Z,1516645641.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:21.367Z,1516645641.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:21.560Z,1516645641.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:21.771Z,1516645641.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:21.960Z,1516645641.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:22.372Z,1516645642.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:22.567Z,1516645642.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:22.767Z,1516645642.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:23.164Z,1516645643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:23.363Z,1516645643.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:23.574Z,1516645643.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:23.767Z,1516645643.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:23.963Z,1516645643.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:24.367Z,1516645644.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:24.563Z,1516645644.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:24.762Z,1516645644.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:25.167Z,1516645645.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:25.361Z,1516645645.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:25.571Z,1516645645.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:25.807Z,1516645645.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:25.965Z,1516645645.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:26.362Z,1516645646.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:26.603Z,1516645646.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:26.764Z,1516645646.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:27.165Z,1516645647.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:27.401Z,1516645647.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:27.584Z,1516645647.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:27.811Z,1516645647.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:27.963Z,1516645647.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:28.380Z,1516645648.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:28.608Z,1516645648.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:28.757Z,1516645648.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x58321 got:0x31517
2018-01-22T18:27:28.776Z,1516645648.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:29.207Z,1516645649.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:29.403Z,1516645649.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:29.610Z,1516645649.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:29.807Z,1516645649.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:29.976Z,1516645649.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:30.378Z,1516645650.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:30.603Z,1516645650.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:30.780Z,1516645650.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:31.219Z,1516645651.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:31.399Z,1516645651.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:31.593Z,1516645651.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:31.803Z,1516645651.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:31.988Z,1516645651.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:32.360Z,1516645652.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:32.599Z,1516645652.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:32.788Z,1516645652.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:33.192Z,1516645653.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:33.414Z,1516645653.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:33.572Z,1516645653.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:33.820Z,1516645653.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:33.990Z,1516645653.990 [PNI_TCM](ERROR): CRC does not match. Expected:0x6674 got:0x19181
2018-01-22T18:27:34.012Z,1516645654.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:34.361Z,1516645654.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:34.615Z,1516645654.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:34.775Z,1516645654.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:35.217Z,1516645655.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:35.411Z,1516645655.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:35.520Z,1516645655.520 [NAL9602](INFO): Powering up NAL9602
2018-01-22T18:27:35.591Z,1516645655.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:35.815Z,1516645655.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:36.006Z,1516645656.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:36.381Z,1516645656.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:36.611Z,1516645656.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:36.818Z,1516645656.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:37.210Z,1516645657.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:37.407Z,1516645657.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:37.565Z,1516645657.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:37.812Z,1516645657.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:37.988Z,1516645657.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:38.405Z,1516645658.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:38.607Z,1516645658.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:38.779Z,1516645658.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:39.182Z,1516645659.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:39.405Z,1516645659.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:39.581Z,1516645659.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:39.847Z,1516645659.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:39.951Z,1516645659.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:40.358Z,1516645660.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:40.643Z,1516645660.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:40.757Z,1516645660.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:41.180Z,1516645661.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:41.439Z,1516645661.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:41.585Z,1516645661.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:41.843Z,1516645661.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:41.981Z,1516645661.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:42.360Z,1516645662.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:42.639Z,1516645662.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:42.771Z,1516645662.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:43.157Z,1516645663.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:43.435Z,1516645663.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:43.576Z,1516645663.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:43.839Z,1516645663.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:43.962Z,1516645663.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:44.390Z,1516645664.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:44.635Z,1516645664.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:44.758Z,1516645664.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:45.165Z,1516645665.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:45.431Z,1516645665.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:45.568Z,1516645665.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:45.835Z,1516645665.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:45.990Z,1516645665.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:46.372Z,1516645666.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:46.631Z,1516645666.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:46.724Z,1516645666.724 [NAL9602](INFO): NAL9602 initialized
2018-01-22T18:27:46.787Z,1516645666.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:47.166Z,1516645667.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:47.429Z,1516645667.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:47.592Z,1516645667.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:47.835Z,1516645667.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:47.969Z,1516645667.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:48.368Z,1516645668.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:48.631Z,1516645668.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:48.768Z,1516645668.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:49.164Z,1516645669.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:49.429Z,1516645669.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:49.563Z,1516645669.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:49.835Z,1516645669.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:49.962Z,1516645669.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:50.372Z,1516645670.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:50.631Z,1516645670.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:50.795Z,1516645670.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:51.211Z,1516645671.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:51.429Z,1516645671.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:51.572Z,1516645671.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:51.835Z,1516645671.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:51.965Z,1516645671.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:52.364Z,1516645672.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:52.631Z,1516645672.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:52.758Z,1516645672.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:53.173Z,1516645673.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:53.432Z,1516645673.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:53.597Z,1516645673.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:53.851Z,1516645673.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:54.002Z,1516645674.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:54.360Z,1516645674.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:54.647Z,1516645674.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:54.766Z,1516645674.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:55.169Z,1516645675.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:55.445Z,1516645675.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:55.851Z,1516645675.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:56.647Z,1516645676.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:57.443Z,1516645677.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:58.239Z,1516645678.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:58.411Z,1516645678.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:58.544Z,1516645678.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:58.885Z,1516645678.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:59.035Z,1516645679.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:27:59.290Z,1516645679.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:59.681Z,1516645679.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:27:59.831Z,1516645679.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:00.076Z,1516645680.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:00.464Z,1516645680.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:00.627Z,1516645680.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:00.871Z,1516645680.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:01.353Z,1516645681.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:01.423Z,1516645681.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:01.696Z,1516645681.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:01.827Z,1516645681.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:02.078Z,1516645682.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:02.231Z,1516645682.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:02.470Z,1516645682.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:02.635Z,1516645682.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:02.877Z,1516645682.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:03.280Z,1516645683.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:03.431Z,1516645683.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:03.682Z,1516645683.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:03.835Z,1516645683.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:04.088Z,1516645684.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:04.482Z,1516645684.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:04.631Z,1516645684.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:04.882Z,1516645684.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:05.276Z,1516645685.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:05.427Z,1516645685.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:05.683Z,1516645685.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:05.831Z,1516645685.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:06.083Z,1516645686.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:06.479Z,1516645686.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:06.627Z,1516645686.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:06.930Z,1516645686.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:07.282Z,1516645687.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:07.425Z,1516645687.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:07.682Z,1516645687.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:07.875Z,1516645687.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:08.081Z,1516645688.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:08.482Z,1516645688.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:08.671Z,1516645688.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:08.874Z,1516645688.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:09.274Z,1516645689.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:09.469Z,1516645689.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:09.684Z,1516645689.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:09.875Z,1516645689.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:10.082Z,1516645690.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:10.481Z,1516645690.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:10.671Z,1516645690.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:10.881Z,1516645690.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:11.280Z,1516645691.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:11.468Z,1516645691.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:11.682Z,1516645691.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:11.871Z,1516645691.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:12.082Z,1516645692.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:12.480Z,1516645692.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:12.667Z,1516645692.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:12.876Z,1516645692.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:13.296Z,1516645693.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:13.463Z,1516645693.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:13.693Z,1516645693.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:13.867Z,1516645693.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:14.098Z,1516645694.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:14.472Z,1516645694.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:14.663Z,1516645694.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:14.876Z,1516645694.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:15.280Z,1516645695.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:15.459Z,1516645695.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:15.674Z,1516645695.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:15.863Z,1516645695.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:16.092Z,1516645696.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:16.488Z,1516645696.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:16.659Z,1516645696.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:16.888Z,1516645696.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:17.280Z,1516645697.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:17.455Z,1516645697.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:17.678Z,1516645697.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:17.859Z,1516645697.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:18.076Z,1516645698.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:18.479Z,1516645698.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:18.658Z,1516645698.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:18.877Z,1516645698.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:19.296Z,1516645699.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:19.451Z,1516645699.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:19.694Z,1516645699.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:19.855Z,1516645699.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:20.094Z,1516645700.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:20.481Z,1516645700.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:20.651Z,1516645700.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:20.884Z,1516645700.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:21.281Z,1516645701.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:21.449Z,1516645701.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:21.683Z,1516645701.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:21.895Z,1516645701.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:22.094Z,1516645702.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:22.485Z,1516645702.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:22.691Z,1516645702.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:22.900Z,1516645702.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:23.288Z,1516645703.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:23.489Z,1516645703.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:23.688Z,1516645703.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:23.895Z,1516645703.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:24.085Z,1516645704.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:24.491Z,1516645704.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:24.691Z,1516645704.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:24.875Z,1516645704.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:25.287Z,1516645705.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:25.487Z,1516645705.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:25.704Z,1516645705.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:25.891Z,1516645705.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:26.093Z,1516645706.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:26.486Z,1516645706.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:26.687Z,1516645706.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:26.878Z,1516645706.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:27.276Z,1516645707.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:27.483Z,1516645707.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:27.686Z,1516645707.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:27.887Z,1516645707.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:28.093Z,1516645708.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:28.490Z,1516645708.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:28.683Z,1516645708.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:28.893Z,1516645708.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:29.288Z,1516645709.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:29.479Z,1516645709.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:29.688Z,1516645709.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:29.883Z,1516645709.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:30.089Z,1516645710.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:30.492Z,1516645710.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:30.679Z,1516645710.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:30.900Z,1516645710.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:31.288Z,1516645711.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:31.477Z,1516645711.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:31.672Z,1516645711.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:31.883Z,1516645711.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:32.090Z,1516645712.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:32.503Z,1516645712.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:32.679Z,1516645712.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:32.900Z,1516645712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:33.276Z,1516645713.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:33.475Z,1516645713.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:33.680Z,1516645713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:33.879Z,1516645713.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:34.084Z,1516645714.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:34.482Z,1516645714.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:34.675Z,1516645714.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:34.885Z,1516645714.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:35.275Z,1516645715.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:35.473Z,1516645715.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:35.680Z,1516645715.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:35.919Z,1516645715.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:36.092Z,1516645716.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:36.492Z,1516645716.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:36.715Z,1516645716.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:36.888Z,1516645716.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:37.291Z,1516645717.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:37.513Z,1516645717.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:37.688Z,1516645717.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:37.919Z,1516645717.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:38.085Z,1516645718.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:38.492Z,1516645718.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:38.715Z,1516645718.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:38.894Z,1516645718.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:39.280Z,1516645719.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:39.511Z,1516645719.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:39.685Z,1516645719.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:39.915Z,1516645719.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:40.090Z,1516645720.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:40.492Z,1516645720.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:40.711Z,1516645720.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:40.891Z,1516645720.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:41.284Z,1516645721.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:41.507Z,1516645721.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:41.682Z,1516645721.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:41.911Z,1516645721.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:42.097Z,1516645722.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:42.502Z,1516645722.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:42.707Z,1516645722.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:42.889Z,1516645722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:43.288Z,1516645723.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:43.503Z,1516645723.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:43.696Z,1516645723.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:43.907Z,1516645723.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:44.093Z,1516645724.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:44.500Z,1516645724.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:44.703Z,1516645724.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:44.901Z,1516645724.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:45.292Z,1516645725.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:45.499Z,1516645725.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:45.688Z,1516645725.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:45.903Z,1516645725.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:46.094Z,1516645726.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:46.493Z,1516645726.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:46.699Z,1516645726.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:46.896Z,1516645726.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:47.301Z,1516645727.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:47.495Z,1516645727.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:47.688Z,1516645727.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:47.899Z,1516645727.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:48.092Z,1516645728.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:48.504Z,1516645728.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:48.695Z,1516645728.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:48.892Z,1516645728.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:49.290Z,1516645729.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:49.493Z,1516645729.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:49.691Z,1516645729.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:49.939Z,1516645729.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:50.093Z,1516645730.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:50.499Z,1516645730.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:50.735Z,1516645730.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:50.893Z,1516645730.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:51.269Z,1516645731.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:51.533Z,1516645731.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:51.694Z,1516645731.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:51.943Z,1516645731.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:52.098Z,1516645732.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:52.496Z,1516645732.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:52.739Z,1516645732.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:52.896Z,1516645732.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:53.298Z,1516645733.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:53.535Z,1516645733.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:53.694Z,1516645733.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:53.939Z,1516645733.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:54.097Z,1516645734.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:54.504Z,1516645734.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:54.737Z,1516645734.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:54.900Z,1516645734.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:55.284Z,1516645735.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:55.531Z,1516645735.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:55.935Z,1516645735.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:56.732Z,1516645736.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:57.527Z,1516645737.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:57.931Z,1516645737.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:58.505Z,1516645738.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:58.647Z,1516645738.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:58.727Z,1516645738.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:58.977Z,1516645738.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:59.407Z,1516645739.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:59.524Z,1516645739.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:28:59.769Z,1516645739.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:28:59.927Z,1516645739.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:00.170Z,1516645740.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:00.571Z,1516645740.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:00.724Z,1516645740.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:00.970Z,1516645740.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:01.375Z,1516645741.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:01.519Z,1516645741.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:01.806Z,1516645741.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:01.923Z,1516645741.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:02.177Z,1516645742.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:02.570Z,1516645742.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:02.719Z,1516645742.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:02.970Z,1516645742.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:03.371Z,1516645743.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:03.517Z,1516645743.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:03.770Z,1516645743.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:03.963Z,1516645743.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:04.192Z,1516645744.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:04.584Z,1516645744.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:04.759Z,1516645744.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:04.984Z,1516645744.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:05.374Z,1516645745.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:05.558Z,1516645745.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:05.779Z,1516645745.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:05.963Z,1516645745.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:06.178Z,1516645746.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:06.583Z,1516645746.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:06.759Z,1516645746.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:06.984Z,1516645746.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:07.396Z,1516645747.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:07.558Z,1516645747.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:07.790Z,1516645747.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:07.963Z,1516645747.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:08.182Z,1516645748.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:08.577Z,1516645748.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:08.762Z,1516645748.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:08.980Z,1516645748.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:09.382Z,1516645749.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:09.555Z,1516645749.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:09.786Z,1516645749.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:09.961Z,1516645749.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:10.187Z,1516645750.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:10.583Z,1516645750.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:10.755Z,1516645750.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:10.987Z,1516645750.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:11.384Z,1516645751.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:11.551Z,1516645751.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:11.778Z,1516645751.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:11.955Z,1516645751.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:12.177Z,1516645752.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:12.584Z,1516645752.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:12.751Z,1516645752.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:12.968Z,1516645752.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:13.396Z,1516645753.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:13.547Z,1516645753.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:13.792Z,1516645753.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:13.951Z,1516645753.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:14.188Z,1516645754.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:14.585Z,1516645754.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:14.747Z,1516645754.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:14.984Z,1516645754.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:15.364Z,1516645755.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:15.543Z,1516645755.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:15.768Z,1516645755.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:15.947Z,1516645755.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:16.194Z,1516645756.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:16.577Z,1516645756.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:16.743Z,1516645756.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:16.996Z,1516645756.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:17.375Z,1516645757.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:17.541Z,1516645757.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:17.770Z,1516645757.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:17.983Z,1516645757.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:18.180Z,1516645758.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:18.576Z,1516645758.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:18.779Z,1516645758.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:18.972Z,1516645758.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:19.392Z,1516645759.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:19.576Z,1516645759.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:19.800Z,1516645759.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:19.987Z,1516645759.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:20.191Z,1516645760.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:20.600Z,1516645760.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:20.783Z,1516645760.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:20.988Z,1516645760.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:21.389Z,1516645761.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:21.579Z,1516645761.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:21.763Z,1516645761.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:21.983Z,1516645761.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:22.201Z,1516645762.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:22.587Z,1516645762.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:22.779Z,1516645762.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:22.993Z,1516645762.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:23.368Z,1516645763.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:23.577Z,1516645763.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:23.776Z,1516645763.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:23.985Z,1516645763.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:24.176Z,1516645764.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:24.576Z,1516645764.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:24.779Z,1516645764.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:24.971Z,1516645764.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:25.378Z,1516645765.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:25.575Z,1516645765.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:25.799Z,1516645765.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:25.979Z,1516645765.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:26.196Z,1516645766.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:26.570Z,1516645766.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:26.775Z,1516645766.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:26.977Z,1516645766.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:27.376Z,1516645767.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:27.571Z,1516645767.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:27.779Z,1516645767.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:27.975Z,1516645767.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:28.195Z,1516645768.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:28.588Z,1516645768.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:28.771Z,1516645768.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:28.988Z,1516645768.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:29.374Z,1516645769.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:29.567Z,1516645769.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:29.776Z,1516645769.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:29.971Z,1516645769.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:30.175Z,1516645770.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:30.584Z,1516645770.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:30.767Z,1516645770.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:30.974Z,1516645770.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:31.385Z,1516645771.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:31.565Z,1516645771.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:31.785Z,1516645771.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:32.003Z,1516645772.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:32.184Z,1516645772.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:32.577Z,1516645772.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:32.799Z,1516645772.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:32.983Z,1516645772.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:33.375Z,1516645773.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:33.597Z,1516645773.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:33.777Z,1516645773.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:34.011Z,1516645774.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:34.188Z,1516645774.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:34.584Z,1516645774.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:34.807Z,1516645774.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:34.986Z,1516645774.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:35.382Z,1516645775.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:35.623Z,1516645775.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:35.780Z,1516645775.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:36.027Z,1516645776.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:36.185Z,1516645776.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:36.595Z,1516645776.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:36.824Z,1516645776.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:36.985Z,1516645776.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:37.376Z,1516645777.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:37.619Z,1516645777.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:37.784Z,1516645777.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:38.023Z,1516645778.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:38.187Z,1516645778.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:38.587Z,1516645778.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:38.819Z,1516645778.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:38.992Z,1516645778.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:39.381Z,1516645779.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:39.617Z,1516645779.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:39.786Z,1516645779.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:40.023Z,1516645780.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:40.190Z,1516645780.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:40.590Z,1516645780.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:40.819Z,1516645780.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:40.992Z,1516645780.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:41.382Z,1516645781.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:41.617Z,1516645781.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:41.784Z,1516645781.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:42.023Z,1516645782.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:42.185Z,1516645782.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:42.596Z,1516645782.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:42.819Z,1516645782.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:42.990Z,1516645782.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:43.388Z,1516645783.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:43.617Z,1516645783.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:43.792Z,1516645783.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:44.019Z,1516645784.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:44.188Z,1516645784.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:44.589Z,1516645784.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:44.817Z,1516645784.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:45.000Z,1516645785.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:45.380Z,1516645785.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:45.613Z,1516645785.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:45.785Z,1516645785.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:46.043Z,1516645786.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:46.196Z,1516645786.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:46.598Z,1516645786.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:46.839Z,1516645786.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:46.994Z,1516645786.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:47.388Z,1516645787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:47.635Z,1516645787.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:47.788Z,1516645787.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:48.039Z,1516645788.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:48.200Z,1516645788.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:48.598Z,1516645788.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:48.835Z,1516645788.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:48.000Z,1516645789.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:49.396Z,1516645789.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:49.631Z,1516645789.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:49.769Z,1516645789.769 [PNI_TCM](ERROR): CRC does not match. Expected:0x25620 got:0x18755
2018-01-22T18:29:49.796Z,1516645789.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:50.035Z,1516645790.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:50.192Z,1516645790.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:50.581Z,1516645790.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:50.831Z,1516645790.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:50.989Z,1516645790.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:51.376Z,1516645791.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:51.627Z,1516645791.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:51.785Z,1516645791.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.031Z,1516645792.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:52.193Z,1516645792.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.591Z,1516645792.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.827Z,1516645792.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:52.988Z,1516645792.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.988Z,1516645792.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-01-22T18:29:52.988Z,1516645792.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:29:52.990Z,1516645792.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.990Z,1516645792.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-01-22T18:29:52.990Z,1516645792.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:29:52.993Z,1516645792.993 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:52.993Z,1516645792.993 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-01-22T18:29:52.993Z,1516645792.993 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:29:53.029Z,1516645793.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:29:53.029Z,1516645793.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:29:53.030Z,1516645793.030 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:29:53.397Z,1516645793.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:29:53.397Z,1516645793.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-01-22T18:29:53.398Z,1516645793.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:29:53.398Z,1516645793.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-01-22T18:29:53.398Z,1516645793.398 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:29:53.398Z,1516645793.398 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-01-22T18:29:53.623Z,1516645793.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:53.781Z,1516645793.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:29:53.781Z,1516645793.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:29:53.782Z,1516645793.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:29:53.782Z,1516645793.782 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:29:53.783Z,1516645793.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:29:53.783Z,1516645793.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:29:53.783Z,1516645793.783 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:29:53.784Z,1516645793.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:29:53.784Z,1516645793.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:29:54.027Z,1516645794.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:54.196Z,1516645794.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:54.597Z,1516645794.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:54.825Z,1516645794.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:54.999Z,1516645794.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:55.389Z,1516645795.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:55.619Z,1516645795.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:56.023Z,1516645796.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:56.819Z,1516645796.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:57.615Z,1516645797.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:58.019Z,1516645798.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:58.655Z,1516645798.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:58.785Z,1516645798.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:58.815Z,1516645798.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:59.137Z,1516645799.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:59.544Z,1516645799.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:29:59.613Z,1516645799.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:29:59.928Z,1516645799.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:00.063Z,1516645800.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:00.324Z,1516645800.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:00.728Z,1516645800.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:00.859Z,1516645800.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:01.121Z,1516645801.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:01.530Z,1516645801.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:01.655Z,1516645801.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:01.933Z,1516645801.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:02.059Z,1516645802.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:02.338Z,1516645802.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:02.726Z,1516645802.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:02.855Z,1516645802.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:03.133Z,1516645803.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:03.528Z,1516645803.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:03.651Z,1516645803.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:03.935Z,1516645803.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:04.055Z,1516645804.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:04.347Z,1516645804.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:04.736Z,1516645804.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:04.851Z,1516645804.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:05.144Z,1516645805.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:05.532Z,1516645805.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:05.647Z,1516645805.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:05.929Z,1516645805.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:06.051Z,1516645806.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:06.326Z,1516645806.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:06.733Z,1516645806.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:06.847Z,1516645806.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:07.126Z,1516645807.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:07.529Z,1516645807.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:07.643Z,1516645807.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:07.942Z,1516645807.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:08.047Z,1516645808.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:08.344Z,1516645808.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:08.728Z,1516645808.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:08.843Z,1516645808.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:09.133Z,1516645809.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:09.529Z,1516645809.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:09.639Z,1516645809.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:09.931Z,1516645809.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:10.043Z,1516645810.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:10.339Z,1516645810.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:10.736Z,1516645810.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:10.839Z,1516645810.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:11.145Z,1516645811.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:11.532Z,1516645811.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:11.635Z,1516645811.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:11.935Z,1516645811.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:12.039Z,1516645812.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:12.328Z,1516645812.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:12.713Z,1516645812.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:12.835Z,1516645812.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:13.112Z,1516645813.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:13.535Z,1516645813.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:13.633Z,1516645813.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:13.950Z,1516645813.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:14.071Z,1516645814.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:14.340Z,1516645814.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:14.720Z,1516645814.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:14.867Z,1516645814.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:15.119Z,1516645815.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:15.520Z,1516645815.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:15.665Z,1516645815.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:15.940Z,1516645815.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:16.077Z,1516645816.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:16.344Z,1516645816.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:16.745Z,1516645816.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:16.871Z,1516645816.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:17.126Z,1516645817.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:17.524Z,1516645817.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:17.668Z,1516645817.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:17.918Z,1516645817.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:18.071Z,1516645818.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:18.318Z,1516645818.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:18.725Z,1516645818.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:18.867Z,1516645818.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:19.124Z,1516645819.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:19.528Z,1516645819.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:19.663Z,1516645819.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:19.956Z,1516645819.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:20.067Z,1516645820.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:20.327Z,1516645820.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:20.736Z,1516645820.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:20.863Z,1516645820.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:21.129Z,1516645821.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:21.528Z,1516645821.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:21.659Z,1516645821.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:21.927Z,1516645821.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:22.063Z,1516645822.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:22.334Z,1516645822.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:22.733Z,1516645822.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:22.859Z,1516645822.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:23.133Z,1516645823.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:23.522Z,1516645823.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:23.655Z,1516645823.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:23.920Z,1516645823.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:24.059Z,1516645824.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:24.324Z,1516645824.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:24.732Z,1516645824.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:24.855Z,1516645824.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:25.119Z,1516645825.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:25.538Z,1516645825.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:25.653Z,1516645825.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:25.944Z,1516645825.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:26.061Z,1516645826.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:26.343Z,1516645826.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:26.730Z,1516645826.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:26.855Z,1516645826.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:27.133Z,1516645827.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:27.530Z,1516645827.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:27.653Z,1516645827.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:27.927Z,1516645827.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:28.095Z,1516645828.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:28.345Z,1516645828.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:28.736Z,1516645828.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:28.891Z,1516645828.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:29.135Z,1516645829.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:29.532Z,1516645829.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:29.689Z,1516645829.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:29.939Z,1516645829.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:30.099Z,1516645830.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:30.343Z,1516645830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:30.715Z,1516645830.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:30.895Z,1516645830.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:31.140Z,1516645831.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:31.548Z,1516645831.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:31.691Z,1516645831.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:31.955Z,1516645831.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:32.095Z,1516645832.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:32.345Z,1516645832.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:32.720Z,1516645832.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:32.891Z,1516645832.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:33.124Z,1516645833.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:33.526Z,1516645833.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:33.687Z,1516645833.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:33.929Z,1516645833.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:34.091Z,1516645834.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:34.327Z,1516645834.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:34.728Z,1516645834.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:34.890Z,1516645834.890 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:35.131Z,1516645835.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:35.529Z,1516645835.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:35.683Z,1516645835.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:35.927Z,1516645835.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:36.087Z,1516645836.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:36.324Z,1516645836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:36.720Z,1516645836.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:36.884Z,1516645836.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:37.125Z,1516645837.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:37.540Z,1516645837.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:37.679Z,1516645837.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:37.938Z,1516645837.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:38.083Z,1516645838.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:38.340Z,1516645838.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:38.731Z,1516645838.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:38.879Z,1516645838.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:39.132Z,1516645839.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:39.521Z,1516645839.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:39.675Z,1516645839.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:39.921Z,1516645839.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:40.079Z,1516645840.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:40.339Z,1516645840.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:40.736Z,1516645840.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:40.875Z,1516645840.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:41.136Z,1516645841.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:41.524Z,1516645841.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:41.673Z,1516645841.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:41.928Z,1516645841.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:42.115Z,1516645842.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:42.325Z,1516645842.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:42.712Z,1516645842.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:42.911Z,1516645842.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:43.111Z,1516645843.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:43.537Z,1516645843.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:43.709Z,1516645843.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:43.945Z,1516645843.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:44.131Z,1516645844.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:44.348Z,1516645844.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:44.720Z,1516645844.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:44.927Z,1516645844.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:45.112Z,1516645845.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:45.540Z,1516645845.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:45.725Z,1516645845.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:45.943Z,1516645845.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:46.131Z,1516645846.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:46.340Z,1516645846.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:46.747Z,1516645846.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:46.927Z,1516645846.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:47.140Z,1516645847.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:47.543Z,1516645847.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:47.725Z,1516645847.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:47.920Z,1516645847.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:48.131Z,1516645848.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:48.316Z,1516645848.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:48.719Z,1516645848.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:48.927Z,1516645848.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:49.124Z,1516645849.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:49.545Z,1516645849.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:49.723Z,1516645849.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:49.953Z,1516645849.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:50.127Z,1516645850.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:50.348Z,1516645850.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:50.720Z,1516645850.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:50.923Z,1516645850.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:51.124Z,1516645851.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:51.524Z,1516645851.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:51.720Z,1516645851.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:51.922Z,1516645851.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:52.123Z,1516645852.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:52.355Z,1516645852.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:52.727Z,1516645852.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:52.919Z,1516645852.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:53.129Z,1516645853.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:53.524Z,1516645853.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:53.715Z,1516645853.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:53.920Z,1516645853.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:54.119Z,1516645854.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:54.318Z,1516645854.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:54.728Z,1516645854.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:54.915Z,1516645854.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:55.122Z,1516645855.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:55.540Z,1516645855.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:55.713Z,1516645855.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:56.135Z,1516645856.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:56.931Z,1516645856.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:57.727Z,1516645857.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:58.149Z,1516645858.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:58.812Z,1516645858.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:58.943Z,1516645858.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:30:58.950Z,1516645858.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:59.295Z,1516645859.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:59.706Z,1516645859.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:30:59.739Z,1516645859.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:00.098Z,1516645860.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:00.143Z,1516645860.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:00.509Z,1516645860.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:00.908Z,1516645860.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:00.940Z,1516645860.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:01.320Z,1516645861.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:01.706Z,1516645861.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:01.735Z,1516645861.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:02.106Z,1516645862.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:02.139Z,1516645862.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:02.496Z,1516645862.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:02.900Z,1516645862.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:02.935Z,1516645862.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:03.314Z,1516645863.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:03.712Z,1516645863.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:03.731Z,1516645863.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:04.120Z,1516645864.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:04.135Z,1516645864.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:04.512Z,1516645864.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:04.904Z,1516645864.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:04.931Z,1516645864.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:05.318Z,1516645865.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:05.701Z,1516645865.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:05.727Z,1516645865.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:06.105Z,1516645866.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:06.131Z,1516645866.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:06.496Z,1516645866.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:06.908Z,1516645866.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:06.927Z,1516645866.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:07.308Z,1516645867.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:07.708Z,1516645867.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:07.723Z,1516645867.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:08.118Z,1516645868.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:08.127Z,1516645868.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:08.496Z,1516645868.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:08.895Z,1516645868.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:08.923Z,1516645868.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:09.309Z,1516645869.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:09.721Z,1516645869.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:09.792Z,1516645869.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:10.116Z,1516645870.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:10.187Z,1516645870.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:10.491Z,1516645870.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:10.898Z,1516645870.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:10.983Z,1516645870.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:11.320Z,1516645871.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:11.779Z,1516645871.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:11.796Z,1516645871.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:12.104Z,1516645872.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:12.191Z,1516645872.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:12.503Z,1516645872.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:12.910Z,1516645872.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:12.987Z,1516645872.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:13.318Z,1516645873.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:13.713Z,1516645873.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:13.783Z,1516645873.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:14.119Z,1516645874.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:14.187Z,1516645874.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:14.504Z,1516645874.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:14.904Z,1516645874.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:14.985Z,1516645874.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:15.321Z,1516645875.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:15.711Z,1516645875.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:15.779Z,1516645875.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:16.124Z,1516645876.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:16.183Z,1516645876.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:16.492Z,1516645876.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:16.896Z,1516645876.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:16.979Z,1516645876.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:17.301Z,1516645877.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:17.708Z,1516645877.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:17.775Z,1516645877.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:18.104Z,1516645878.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:18.179Z,1516645878.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:18.496Z,1516645878.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:18.900Z,1516645878.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:18.975Z,1516645878.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:19.312Z,1516645879.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:19.718Z,1516645879.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:19.771Z,1516645879.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:20.113Z,1516645880.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:20.175Z,1516645880.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:20.504Z,1516645880.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:20.912Z,1516645880.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:20.971Z,1516645880.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:21.320Z,1516645881.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:21.716Z,1516645881.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:21.768Z,1516645881.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:22.118Z,1516645882.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:22.171Z,1516645882.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:22.489Z,1516645882.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:22.887Z,1516645882.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:22.967Z,1516645882.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:23.324Z,1516645883.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:23.764Z,1516645883.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:23.798Z,1516645883.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:24.105Z,1516645884.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:24.200Z,1516645884.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:24.499Z,1516645884.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:24.901Z,1516645884.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:24.995Z,1516645884.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:25.302Z,1516645885.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:25.701Z,1516645885.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:25.791Z,1516645885.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:26.120Z,1516645886.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:26.203Z,1516645886.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:26.500Z,1516645886.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:26.900Z,1516645886.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:26.999Z,1516645886.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:27.303Z,1516645887.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:27.705Z,1516645887.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:27.795Z,1516645887.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:28.116Z,1516645888.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:28.199Z,1516645888.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:28.509Z,1516645888.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:28.895Z,1516645888.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:28.995Z,1516645888.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:29.299Z,1516645889.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:29.701Z,1516645889.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:29.791Z,1516645889.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:30.103Z,1516645890.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:30.195Z,1516645890.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:30.520Z,1516645890.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:30.909Z,1516645890.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:30.991Z,1516645890.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:31.309Z,1516645891.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:31.695Z,1516645891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:31.787Z,1516645891.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:32.104Z,1516645892.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:32.191Z,1516645892.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:32.493Z,1516645892.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:32.905Z,1516645892.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:32.987Z,1516645892.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:33.289Z,1516645893.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:33.717Z,1516645893.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:33.783Z,1516645893.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:34.126Z,1516645894.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:34.187Z,1516645894.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:34.514Z,1516645894.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:34.912Z,1516645894.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:34.983Z,1516645894.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:35.289Z,1516645895.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:35.704Z,1516645895.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:35.779Z,1516645895.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:36.100Z,1516645896.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:36.183Z,1516645896.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:36.508Z,1516645896.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:36.905Z,1516645896.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:36.979Z,1516645896.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:37.304Z,1516645897.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:37.695Z,1516645897.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:37.777Z,1516645897.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:38.108Z,1516645898.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:38.207Z,1516645898.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:38.496Z,1516645898.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:38.896Z,1516645898.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:39.003Z,1516645899.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:39.304Z,1516645899.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:39.708Z,1516645899.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:39.800Z,1516645899.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:40.114Z,1516645900.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:40.211Z,1516645900.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:40.514Z,1516645900.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:40.904Z,1516645900.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:41.007Z,1516645901.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:41.306Z,1516645901.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:41.710Z,1516645901.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:41.803Z,1516645901.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:42.096Z,1516645902.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:42.207Z,1516645902.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:42.513Z,1516645902.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:42.925Z,1516645902.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:43.003Z,1516645903.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:43.311Z,1516645903.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:43.704Z,1516645903.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:43.801Z,1516645903.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:44.118Z,1516645904.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:44.207Z,1516645904.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:44.496Z,1516645904.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:44.896Z,1516645904.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:45.003Z,1516645905.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:45.292Z,1516645905.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:45.698Z,1516645905.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:45.800Z,1516645905.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:46.114Z,1516645906.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:46.203Z,1516645906.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:46.523Z,1516645906.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:46.892Z,1516645906.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:46.999Z,1516645906.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:47.296Z,1516645907.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:47.700Z,1516645907.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:47.795Z,1516645907.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:48.100Z,1516645908.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:48.199Z,1516645908.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:48.518Z,1516645908.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:48.902Z,1516645908.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:48.995Z,1516645908.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:49.305Z,1516645909.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:49.700Z,1516645909.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:49.791Z,1516645909.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:50.099Z,1516645910.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:50.195Z,1516645910.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:50.504Z,1516645910.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:50.898Z,1516645910.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:50.991Z,1516645910.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:51.308Z,1516645911.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:51.710Z,1516645911.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:51.789Z,1516645911.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:52.119Z,1516645912.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:52.231Z,1516645912.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:52.523Z,1516645912.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:52.909Z,1516645912.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:53.027Z,1516645913.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:53.293Z,1516645913.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:53.688Z,1516645913.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:53.823Z,1516645913.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:54.092Z,1516645914.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:54.227Z,1516645914.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:54.520Z,1516645914.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:54.917Z,1516645914.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:54.920Z,1516645914.920 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T18:31:54.920Z,1516645914.920 [Default:CheckIn:C.Wait] Stopped
2018-01-22T18:31:54.920Z,1516645914.920 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T18:31:54.921Z,1516645914.921 [Default:CheckIn:D] Running Loop=1
2018-01-22T18:31:55.023Z,1516645915.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:55.317Z,1516645915.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:55.323Z,1516645915.323 [Default:CheckIn:D] Stopped
2018-01-22T18:31:55.323Z,1516645915.323 [Default:CheckIn:E] Running Loop=1
2018-01-22T18:31:55.715Z,1516645915.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:55.718Z,1516645915.718 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.510545 min 
2018-01-22T18:31:55.720Z,1516645915.720 [Default:CheckIn:E] Stopped
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn] Stopped
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn](INFO): Running loop #2
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn] Running Loop=2
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T18:31:55.721Z,1516645915.721 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T18:31:55.819Z,1516645915.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:56.223Z,1516645916.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:57.019Z,1516645917.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:57.815Z,1516645917.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:58.219Z,1516645918.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:58.988Z,1516645918.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:59.015Z,1516645919.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:59.116Z,1516645919.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:59.524Z,1516645919.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:31:59.811Z,1516645919.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:31:59.883Z,1516645919.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:00.215Z,1516645920.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:00.258Z,1516645920.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:00.651Z,1516645920.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:01.011Z,1516645921.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:01.061Z,1516645921.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:01.516Z,1516645921.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:01.807Z,1516645921.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:01.868Z,1516645921.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:02.211Z,1516645922.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:02.245Z,1516645922.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:02.668Z,1516645922.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:03.007Z,1516645923.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:03.081Z,1516645923.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:03.526Z,1516645923.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:03.811Z,1516645923.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:03.864Z,1516645923.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:04.218Z,1516645924.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:04.258Z,1516645924.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:04.656Z,1516645924.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:05.011Z,1516645925.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:05.058Z,1516645925.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:05.464Z,1516645925.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:05.808Z,1516645925.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:05.903Z,1516645925.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:06.251Z,1516645926.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:06.266Z,1516645926.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:06.657Z,1516645926.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:07.047Z,1516645927.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:07.054Z,1516645927.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:07.452Z,1516645927.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:07.844Z,1516645927.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:07.895Z,1516645927.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:08.260Z,1516645928.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:08.295Z,1516645928.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:08.665Z,1516645928.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:09.068Z,1516645929.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:09.091Z,1516645929.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:09.508Z,1516645929.508 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:32:09.508Z,1516645929.508 [BPC1] Communications Fault, FailCount= 5
2018-01-22T18:32:09.508Z,1516645929.508 [BPC1](ERROR): Communications Fault
2018-01-22T18:32:09.524Z,1516645929.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:09.580Z,1516645929.580 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:32:09.853Z,1516645929.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:09.887Z,1516645929.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:10.264Z,1516645930.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:10.291Z,1516645930.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:10.644Z,1516645930.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:10.677Z,1516645930.677 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:32:10.677Z,1516645930.677 [BPC1] No Fault, FailCount= 5
2018-01-22T18:32:11.087Z,1516645931.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:11.116Z,1516645931.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:11.524Z,1516645931.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:11.877Z,1516645931.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:11.883Z,1516645931.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:12.257Z,1516645932.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:12.287Z,1516645932.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:12.652Z,1516645932.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:13.059Z,1516645933.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:13.083Z,1516645933.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:13.521Z,1516645933.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:13.856Z,1516645933.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:13.879Z,1516645933.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:14.246Z,1516645934.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:14.283Z,1516645934.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:14.656Z,1516645934.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:15.057Z,1516645935.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:15.079Z,1516645935.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:15.534Z,1516645935.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:15.854Z,1516645935.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:15.875Z,1516645935.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:16.251Z,1516645936.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:16.279Z,1516645936.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:16.656Z,1516645936.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:17.052Z,1516645937.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:17.075Z,1516645937.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:17.464Z,1516645937.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:17.867Z,1516645937.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:17.871Z,1516645937.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:18.268Z,1516645938.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:18.275Z,1516645938.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:18.661Z,1516645938.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:19.055Z,1516645939.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:19.071Z,1516645939.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:19.444Z,1516645939.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:19.870Z,1516645939.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:19.921Z,1516645939.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:20.277Z,1516645940.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:20.283Z,1516645940.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:20.684Z,1516645940.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:21.079Z,1516645941.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:21.081Z,1516645941.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:21.481Z,1516645941.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:21.875Z,1516645941.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:21.895Z,1516645941.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:22.260Z,1516645942.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:22.335Z,1516645942.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:22.664Z,1516645942.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:23.060Z,1516645943.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:23.131Z,1516645943.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:23.535Z,1516645943.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:23.866Z,1516645943.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:23.927Z,1516645943.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:24.268Z,1516645944.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:24.331Z,1516645944.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:24.661Z,1516645944.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:25.063Z,1516645945.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:25.127Z,1516645945.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:25.504Z,1516645945.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:25.862Z,1516645945.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:25.923Z,1516645945.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:26.256Z,1516645946.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:26.329Z,1516645946.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:26.666Z,1516645946.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:27.066Z,1516645947.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:27.124Z,1516645947.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:27.530Z,1516645947.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:27.863Z,1516645947.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:27.919Z,1516645947.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:28.260Z,1516645948.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:28.323Z,1516645948.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:28.665Z,1516645948.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:29.061Z,1516645949.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:29.119Z,1516645949.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:29.501Z,1516645949.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:29.870Z,1516645949.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:29.915Z,1516645949.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:30.277Z,1516645950.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:30.319Z,1516645950.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:30.662Z,1516645950.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:31.073Z,1516645951.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:31.115Z,1516645951.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:31.469Z,1516645951.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:31.897Z,1516645951.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:31.911Z,1516645951.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:32.294Z,1516645952.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:32.315Z,1516645952.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:32.682Z,1516645952.682 [BPC1](INFO): Initialized
2018-01-22T18:32:32.689Z,1516645952.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:33.064Z,1516645953.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:33.111Z,1516645953.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:33.493Z,1516645953.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:33.907Z,1516645953.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:33.952Z,1516645953.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:34.290Z,1516645954.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:34.347Z,1516645954.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:34.700Z,1516645954.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:35.057Z,1516645955.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:35.144Z,1516645955.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:35.476Z,1516645955.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:35.943Z,1516645955.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:35.974Z,1516645955.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:36.312Z,1516645956.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:36.371Z,1516645956.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:36.666Z,1516645956.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:37.080Z,1516645957.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:37.167Z,1516645957.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:37.574Z,1516645957.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:37.884Z,1516645957.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:37.964Z,1516645957.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:38.301Z,1516645958.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:38.367Z,1516645958.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:38.662Z,1516645958.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:39.057Z,1516645959.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:39.163Z,1516645959.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:39.544Z,1516645959.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:39.876Z,1516645959.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:39.960Z,1516645959.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:40.273Z,1516645960.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:40.363Z,1516645960.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:40.656Z,1516645960.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:41.052Z,1516645961.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:41.159Z,1516645961.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:41.458Z,1516645961.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:41.865Z,1516645961.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:41.955Z,1516645961.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:42.268Z,1516645962.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:42.359Z,1516645962.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:42.653Z,1516645962.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:43.053Z,1516645963.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:43.155Z,1516645963.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:43.465Z,1516645963.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:43.872Z,1516645963.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:43.951Z,1516645963.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:44.276Z,1516645964.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:44.355Z,1516645964.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:44.658Z,1516645964.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:45.057Z,1516645965.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:45.151Z,1516645965.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:45.467Z,1516645965.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:45.917Z,1516645965.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:45.947Z,1516645965.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:46.269Z,1516645966.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:46.351Z,1516645966.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:46.656Z,1516645966.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:47.068Z,1516645967.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:47.147Z,1516645967.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:47.469Z,1516645967.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:47.944Z,1516645967.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:47.946Z,1516645967.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:48.253Z,1516645968.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:48.347Z,1516645968.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:48.647Z,1516645968.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:49.052Z,1516645969.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:49.143Z,1516645969.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:49.472Z,1516645969.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:49.928Z,1516645969.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:49.939Z,1516645969.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:50.286Z,1516645970.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:50.355Z,1516645970.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:50.656Z,1516645970.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:51.052Z,1516645971.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:51.151Z,1516645971.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:51.461Z,1516645971.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:51.868Z,1516645971.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:51.947Z,1516645971.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:52.264Z,1516645972.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:52.351Z,1516645972.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:52.664Z,1516645972.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.051Z,1516645973.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.147Z,1516645973.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:53.464Z,1516645973.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.881Z,1516645973.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.881Z,1516645973.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-01-22T18:32:53.881Z,1516645973.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:32:53.883Z,1516645973.883 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.883Z,1516645973.883 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-01-22T18:32:53.883Z,1516645973.883 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:32:53.908Z,1516645973.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:53.908Z,1516645973.908 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-01-22T18:32:53.908Z,1516645973.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:32:53.943Z,1516645973.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:53.949Z,1516645973.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:32:53.949Z,1516645973.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:32:53.949Z,1516645973.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:32:54.288Z,1516645974.288 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:32:54.288Z,1516645974.288 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-01-22T18:32:54.289Z,1516645974.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:32:54.289Z,1516645974.289 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-01-22T18:32:54.289Z,1516645974.289 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:32:54.289Z,1516645974.289 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-01-22T18:32:54.347Z,1516645974.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:54.651Z,1516645974.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:32:54.651Z,1516645974.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:32:54.652Z,1516645974.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:32:54.652Z,1516645974.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:32:54.652Z,1516645974.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:32:54.653Z,1516645974.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:32:54.653Z,1516645974.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:32:54.654Z,1516645974.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:32:54.654Z,1516645974.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:32:55.056Z,1516645975.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:55.144Z,1516645975.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:55.464Z,1516645975.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:55.865Z,1516645975.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:55.939Z,1516645975.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:56.343Z,1516645976.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:57.139Z,1516645977.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:57.935Z,1516645977.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:58.339Z,1516645978.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:59.102Z,1516645979.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:59.135Z,1516645979.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:59.245Z,1516645979.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:59.640Z,1516645979.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:32:59.931Z,1516645979.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:32:59.988Z,1516645979.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:00.336Z,1516645980.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:00.371Z,1516645980.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:00.780Z,1516645980.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:01.131Z,1516645981.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:01.182Z,1516645981.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:01.580Z,1516645981.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:01.927Z,1516645981.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:01.984Z,1516645981.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:02.331Z,1516645982.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:02.375Z,1516645982.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:02.777Z,1516645982.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:03.127Z,1516645983.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:03.171Z,1516645983.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:03.581Z,1516645983.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:03.925Z,1516645983.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:03.990Z,1516645983.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:04.335Z,1516645984.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:04.388Z,1516645984.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:04.778Z,1516645984.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:05.131Z,1516645985.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:05.173Z,1516645985.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:05.634Z,1516645985.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:05.927Z,1516645985.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:05.988Z,1516645985.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:06.334Z,1516645986.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:06.360Z,1516645986.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:06.781Z,1516645986.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:07.127Z,1516645987.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:07.183Z,1516645987.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:07.635Z,1516645987.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:07.924Z,1516645987.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:07.975Z,1516645987.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:08.327Z,1516645988.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:08.377Z,1516645988.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:08.784Z,1516645988.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:09.124Z,1516645989.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:09.180Z,1516645989.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:09.709Z,1516645989.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:09.930Z,1516645989.930 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:09.994Z,1516645989.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:10.335Z,1516645990.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:10.387Z,1516645990.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:10.768Z,1516645990.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:11.131Z,1516645991.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:11.165Z,1516645991.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:11.633Z,1516645991.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:11.927Z,1516645991.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:11.992Z,1516645991.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:12.331Z,1516645992.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:12.372Z,1516645992.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:12.786Z,1516645992.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:13.128Z,1516645993.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:13.188Z,1516645993.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:13.649Z,1516645993.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:13.924Z,1516645993.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:13.973Z,1516645993.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:14.327Z,1516645994.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:14.377Z,1516645994.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:14.770Z,1516645994.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:15.124Z,1516645995.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:15.180Z,1516645995.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:15.584Z,1516645995.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:15.937Z,1516645995.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:16.015Z,1516645996.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:16.360Z,1516645996.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:16.382Z,1516645996.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:16.780Z,1516645996.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:17.155Z,1516645997.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:17.172Z,1516645997.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:17.576Z,1516645997.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:17.951Z,1516645997.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:18.012Z,1516645998.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:18.368Z,1516645998.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:18.399Z,1516645998.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:18.781Z,1516645998.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:19.188Z,1516645999.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:19.195Z,1516645999.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:19.635Z,1516645999.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:19.974Z,1516645999.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:19.991Z,1516645999.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:20.372Z,1516646000.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:20.395Z,1516646000.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:20.780Z,1516646000.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:21.189Z,1516646001.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:21.191Z,1516646001.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:21.644Z,1516646001.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:21.969Z,1516646001.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:21.987Z,1516646001.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:22.373Z,1516646002.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:22.391Z,1516646002.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:22.770Z,1516646002.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:23.171Z,1516646003.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:23.187Z,1516646003.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:23.632Z,1516646003.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:23.968Z,1516646003.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:23.983Z,1516646003.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:24.372Z,1516646004.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:24.387Z,1516646004.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:24.786Z,1516646004.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:25.181Z,1516646005.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:25.183Z,1516646005.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:25.647Z,1516646005.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:25.972Z,1516646005.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:25.979Z,1516646005.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:26.376Z,1516646006.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:26.383Z,1516646006.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:26.769Z,1516646006.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:27.166Z,1516646007.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:27.179Z,1516646007.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:27.576Z,1516646007.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:27.975Z,1516646007.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:27.984Z,1516646007.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:28.379Z,1516646008.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:28.382Z,1516646008.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:28.777Z,1516646008.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:29.175Z,1516646009.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:29.179Z,1516646009.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:29.574Z,1516646009.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:29.971Z,1516646009.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:30.064Z,1516646010.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:30.369Z,1516646010.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:30.447Z,1516646010.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:30.782Z,1516646010.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:31.181Z,1516646011.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:31.243Z,1516646011.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:31.583Z,1516646011.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:32.011Z,1516646012.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:32.039Z,1516646012.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:32.377Z,1516646012.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:32.443Z,1516646012.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:32.761Z,1516646012.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:33.160Z,1516646013.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:33.239Z,1516646013.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:33.661Z,1516646013.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:33.990Z,1516646013.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:34.035Z,1516646014.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:34.374Z,1516646014.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:34.439Z,1516646014.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:34.764Z,1516646014.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:35.169Z,1516646015.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:35.235Z,1516646015.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:35.639Z,1516646015.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:35.967Z,1516646015.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:36.031Z,1516646016.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:36.366Z,1516646016.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:36.436Z,1516646016.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:36.774Z,1516646016.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:37.179Z,1516646017.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:37.231Z,1516646017.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:37.635Z,1516646017.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:37.976Z,1516646017.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:38.027Z,1516646018.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:38.376Z,1516646018.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:38.432Z,1516646018.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:38.777Z,1516646018.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:39.174Z,1516646019.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:39.227Z,1516646019.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:39.665Z,1516646019.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:39.980Z,1516646019.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:40.023Z,1516646020.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:40.391Z,1516646020.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:40.427Z,1516646020.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:40.772Z,1516646020.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:41.175Z,1516646021.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:41.223Z,1516646021.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:41.580Z,1516646021.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:41.964Z,1516646021.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:42.019Z,1516646022.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:42.359Z,1516646022.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:42.423Z,1516646022.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:42.789Z,1516646022.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:43.173Z,1516646023.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:43.219Z,1516646023.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:43.574Z,1516646023.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:44.015Z,1516646024.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:44.072Z,1516646024.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:44.372Z,1516646024.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:44.471Z,1516646024.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:44.777Z,1516646024.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:45.177Z,1516646025.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:45.267Z,1516646025.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:45.582Z,1516646025.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:46.026Z,1516646026.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:46.063Z,1516646026.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:46.389Z,1516646026.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:46.467Z,1516646026.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:46.764Z,1516646026.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:47.166Z,1516646027.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:47.263Z,1516646027.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:47.573Z,1516646027.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:47.988Z,1516646027.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:48.059Z,1516646028.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:48.380Z,1516646028.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:48.463Z,1516646028.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:48.774Z,1516646028.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:49.178Z,1516646029.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:49.259Z,1516646029.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:49.581Z,1516646029.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:49.982Z,1516646029.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:50.056Z,1516646030.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:50.386Z,1516646030.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:50.459Z,1516646030.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:50.764Z,1516646030.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:51.164Z,1516646031.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:51.255Z,1516646031.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:51.592Z,1516646031.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:51.977Z,1516646031.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:52.051Z,1516646032.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:52.369Z,1516646032.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:52.455Z,1516646032.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:52.769Z,1516646032.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:53.171Z,1516646033.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:53.251Z,1516646033.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:53.576Z,1516646033.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:53.992Z,1516646033.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:54.055Z,1516646034.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:54.381Z,1516646034.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:54.459Z,1516646034.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:54.769Z,1516646034.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:55.178Z,1516646035.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:55.255Z,1516646035.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:55.581Z,1516646035.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:55.982Z,1516646035.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:56.051Z,1516646036.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:56.455Z,1516646036.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:57.251Z,1516646037.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:58.048Z,1516646038.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:58.451Z,1516646038.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:59.218Z,1516646039.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:59.267Z,1516646039.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:33:59.340Z,1516646039.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:33:59.683Z,1516646039.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:00.065Z,1516646040.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:00.092Z,1516646040.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:00.471Z,1516646040.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:00.491Z,1516646040.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:00.896Z,1516646040.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:01.267Z,1516646041.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:01.293Z,1516646041.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:01.720Z,1516646041.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:02.063Z,1516646042.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:02.103Z,1516646042.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:02.467Z,1516646042.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:02.496Z,1516646042.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:02.892Z,1516646042.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:03.263Z,1516646043.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:03.290Z,1516646043.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:03.744Z,1516646043.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:04.059Z,1516646044.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:04.108Z,1516646044.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:04.464Z,1516646044.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:04.508Z,1516646044.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:04.926Z,1516646044.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:05.260Z,1516646045.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:05.296Z,1516646045.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:05.716Z,1516646045.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:06.057Z,1516646046.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:06.100Z,1516646046.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:06.463Z,1516646046.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:06.500Z,1516646046.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:06.906Z,1516646046.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:07.259Z,1516646047.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:07.311Z,1516646047.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:07.725Z,1516646047.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:08.055Z,1516646048.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:08.097Z,1516646048.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:08.460Z,1516646048.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:08.500Z,1516646048.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:08.879Z,1516646048.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:09.257Z,1516646049.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:09.279Z,1516646049.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:09.763Z,1516646049.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:10.051Z,1516646050.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:10.117Z,1516646050.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:10.455Z,1516646050.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:10.493Z,1516646050.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:10.884Z,1516646050.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:11.252Z,1516646051.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:11.291Z,1516646051.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:11.683Z,1516646051.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:12.048Z,1516646052.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:12.112Z,1516646052.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:12.452Z,1516646052.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:12.487Z,1516646052.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:12.895Z,1516646052.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:13.247Z,1516646053.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:13.300Z,1516646053.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:13.696Z,1516646053.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:14.043Z,1516646054.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:14.105Z,1516646054.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:14.463Z,1516646054.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:14.485Z,1516646054.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:14.894Z,1516646054.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:15.259Z,1516646055.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:15.291Z,1516646055.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:15.751Z,1516646055.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:16.056Z,1516646056.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:16.108Z,1516646056.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:16.459Z,1516646056.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:16.501Z,1516646056.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:16.900Z,1516646056.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:17.256Z,1516646057.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:17.281Z,1516646057.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:17.724Z,1516646057.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:18.051Z,1516646058.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:18.068Z,1516646058.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:18.095Z,1516646058.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:18.455Z,1516646058.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:18.461Z,1516646058.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:18.489Z,1516646058.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:18.882Z,1516646058.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:18.898Z,1516646058.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:19.252Z,1516646059.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:19.282Z,1516646059.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:19.302Z,1516646059.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:19.738Z,1516646059.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:19.761Z,1516646059.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:20.050Z,1516646060.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:20.064Z,1516646060.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:20.094Z,1516646060.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:20.456Z,1516646060.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:20.462Z,1516646060.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:20.489Z,1516646060.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:20.862Z,1516646060.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:20.899Z,1516646060.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:21.252Z,1516646061.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:21.262Z,1516646061.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:21.277Z,1516646061.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:21.746Z,1516646061.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:22.047Z,1516646062.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:22.100Z,1516646062.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:22.451Z,1516646062.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:22.491Z,1516646062.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:22.888Z,1516646062.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:23.247Z,1516646063.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:23.284Z,1516646063.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:23.681Z,1516646063.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:24.043Z,1516646064.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:24.096Z,1516646064.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:24.447Z,1516646064.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:24.487Z,1516646064.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:24.896Z,1516646064.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:25.243Z,1516646065.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:25.283Z,1516646065.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:25.298Z,1516646065.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:25.679Z,1516646065.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:25.698Z,1516646065.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:26.041Z,1516646066.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:26.095Z,1516646066.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:26.127Z,1516646066.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:26.461Z,1516646066.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:26.463Z,1516646066.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:26.492Z,1516646066.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:26.862Z,1516646066.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:26.895Z,1516646066.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:27.259Z,1516646067.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:27.262Z,1516646067.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:27.300Z,1516646067.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:27.683Z,1516646067.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:27.697Z,1516646067.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:28.056Z,1516646068.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:28.092Z,1516646068.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:28.118Z,1516646068.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:28.467Z,1516646068.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:28.479Z,1516646068.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:28.506Z,1516646068.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:28.896Z,1516646068.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:29.263Z,1516646069.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:29.304Z,1516646069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:29.749Z,1516646069.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:30.060Z,1516646070.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:30.082Z,1516646070.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:30.464Z,1516646070.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:30.488Z,1516646070.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:30.889Z,1516646070.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:31.259Z,1516646071.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:31.293Z,1516646071.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:31.739Z,1516646071.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:32.055Z,1516646072.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:32.100Z,1516646072.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:32.459Z,1516646072.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:32.467Z,1516646072.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:32.491Z,1516646072.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:32.865Z,1516646072.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:32.884Z,1516646072.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:33.255Z,1516646073.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:33.263Z,1516646073.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:33.296Z,1516646073.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:33.750Z,1516646073.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:34.051Z,1516646074.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:34.102Z,1516646074.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:34.455Z,1516646074.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:34.489Z,1516646074.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:34.888Z,1516646074.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:35.251Z,1516646075.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:35.284Z,1516646075.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:35.736Z,1516646075.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:36.048Z,1516646076.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:36.104Z,1516646076.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:36.452Z,1516646076.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:36.487Z,1516646076.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:36.900Z,1516646076.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:37.247Z,1516646077.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:37.298Z,1516646077.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:37.697Z,1516646077.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:38.043Z,1516646078.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:38.112Z,1516646078.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:38.447Z,1516646078.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:38.476Z,1516646078.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:38.876Z,1516646078.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:39.243Z,1516646079.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:39.304Z,1516646079.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:39.708Z,1516646079.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:40.040Z,1516646080.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:40.136Z,1516646080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:40.489Z,1516646080.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:40.491Z,1516646080.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:40.882Z,1516646080.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:41.282Z,1516646081.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:41.287Z,1516646081.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:41.683Z,1516646081.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:42.084Z,1516646082.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:42.144Z,1516646082.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:42.493Z,1516646082.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:42.535Z,1516646082.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:42.898Z,1516646082.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:43.297Z,1516646083.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:43.331Z,1516646083.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:43.760Z,1516646083.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:44.100Z,1516646084.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:44.127Z,1516646084.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:44.504Z,1516646084.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:44.531Z,1516646084.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:44.876Z,1516646084.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:45.280Z,1516646085.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:45.327Z,1516646085.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:45.749Z,1516646085.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:46.097Z,1516646086.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:46.123Z,1516646086.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:46.503Z,1516646086.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:46.527Z,1516646086.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:46.886Z,1516646086.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:47.283Z,1516646087.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:47.323Z,1516646087.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:47.741Z,1516646087.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:48.076Z,1516646088.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:48.119Z,1516646088.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:48.482Z,1516646088.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:48.523Z,1516646088.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:48.889Z,1516646088.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:49.292Z,1516646089.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:49.319Z,1516646089.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:49.760Z,1516646089.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:50.083Z,1516646090.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:50.115Z,1516646090.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:50.496Z,1516646090.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:50.519Z,1516646090.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:50.884Z,1516646090.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:51.288Z,1516646091.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:51.315Z,1516646091.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:51.696Z,1516646091.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:52.103Z,1516646092.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:52.111Z,1516646092.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:52.506Z,1516646092.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:52.515Z,1516646092.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:52.896Z,1516646092.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:53.289Z,1516646093.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:53.311Z,1516646093.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:53.689Z,1516646093.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:54.108Z,1516646094.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:54.137Z,1516646094.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:54.479Z,1516646094.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:54.555Z,1516646094.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:54.901Z,1516646094.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:55.306Z,1516646095.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:55.351Z,1516646095.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:55.689Z,1516646095.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:56.155Z,1516646096.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:56.169Z,1516646096.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:56.559Z,1516646096.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:57.355Z,1516646097.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:58.151Z,1516646098.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:58.555Z,1516646098.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:59.351Z,1516646099.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:34:59.367Z,1516646099.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:59.472Z,1516646099.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:34:59.867Z,1516646099.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:00.147Z,1516646100.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:00.283Z,1516646100.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:00.551Z,1516646100.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:00.668Z,1516646100.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:01.043Z,1516646101.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:01.347Z,1516646101.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:01.454Z,1516646101.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:01.870Z,1516646101.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:02.143Z,1516646102.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:02.250Z,1516646102.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:02.547Z,1516646102.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:02.651Z,1516646102.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:03.049Z,1516646103.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:03.343Z,1516646103.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:03.468Z,1516646103.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:03.851Z,1516646103.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:04.139Z,1516646104.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:04.249Z,1516646104.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:04.543Z,1516646104.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:04.649Z,1516646104.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:05.067Z,1516646105.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:05.339Z,1516646105.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:05.452Z,1516646105.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:05.884Z,1516646105.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:06.135Z,1516646106.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:06.252Z,1516646106.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:06.539Z,1516646106.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:06.671Z,1516646106.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:07.051Z,1516646107.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:07.335Z,1516646107.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:07.452Z,1516646107.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:07.846Z,1516646107.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:08.131Z,1516646108.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:08.276Z,1516646108.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:08.535Z,1516646108.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:08.644Z,1516646108.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:09.054Z,1516646109.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:09.331Z,1516646109.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:09.456Z,1516646109.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:09.876Z,1516646109.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:10.127Z,1516646110.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:10.259Z,1516646110.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:10.531Z,1516646110.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:10.653Z,1516646110.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:11.063Z,1516646111.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:11.327Z,1516646111.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:11.460Z,1516646111.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:11.849Z,1516646111.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:12.123Z,1516646112.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:12.261Z,1516646112.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:12.527Z,1516646112.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:12.657Z,1516646112.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:13.052Z,1516646113.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:13.323Z,1516646113.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:13.456Z,1516646113.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:13.856Z,1516646113.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:14.121Z,1516646114.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:14.252Z,1516646114.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:14.529Z,1516646114.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:14.652Z,1516646114.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:15.056Z,1516646115.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:15.323Z,1516646115.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:15.467Z,1516646115.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:15.862Z,1516646115.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:16.119Z,1516646116.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:16.252Z,1516646116.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:16.523Z,1516646116.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:16.650Z,1516646116.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:17.092Z,1516646117.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:17.319Z,1516646117.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:17.455Z,1516646117.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:17.851Z,1516646117.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:18.115Z,1516646118.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:18.257Z,1516646118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:18.519Z,1516646118.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:18.660Z,1516646118.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:19.056Z,1516646119.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:19.315Z,1516646119.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:19.451Z,1516646119.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:19.901Z,1516646119.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:20.111Z,1516646120.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:20.267Z,1516646120.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:20.515Z,1516646120.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:20.668Z,1516646120.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:21.060Z,1516646121.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:21.311Z,1516646121.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:21.462Z,1516646121.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:21.832Z,1516646121.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:22.109Z,1516646122.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:22.264Z,1516646122.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:22.547Z,1516646122.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:22.636Z,1516646122.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:23.063Z,1516646123.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:23.343Z,1516646123.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:23.446Z,1516646123.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:23.845Z,1516646123.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:24.141Z,1516646124.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:24.244Z,1516646124.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:24.547Z,1516646124.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:24.638Z,1516646124.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:25.040Z,1516646125.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:25.343Z,1516646125.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:25.442Z,1516646125.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:25.857Z,1516646125.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:26.139Z,1516646126.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:26.252Z,1516646126.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:26.543Z,1516646126.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:26.658Z,1516646126.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:27.040Z,1516646127.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:27.339Z,1516646127.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:27.444Z,1516646127.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:27.857Z,1516646127.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:28.135Z,1516646128.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:28.249Z,1516646128.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:28.539Z,1516646128.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:28.640Z,1516646128.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:29.058Z,1516646129.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:29.335Z,1516646129.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:29.454Z,1516646129.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:29.865Z,1516646129.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:30.133Z,1516646130.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:30.236Z,1516646130.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:30.539Z,1516646130.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:30.632Z,1516646130.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:31.036Z,1516646131.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:31.335Z,1516646131.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:31.440Z,1516646131.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:31.861Z,1516646131.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:32.131Z,1516646132.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:32.261Z,1516646132.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:32.535Z,1516646132.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:32.646Z,1516646132.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:33.040Z,1516646133.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:33.331Z,1516646133.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:33.448Z,1516646133.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:33.913Z,1516646133.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:34.127Z,1516646134.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:34.241Z,1516646134.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:34.531Z,1516646134.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:34.654Z,1516646134.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:35.064Z,1516646135.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:35.327Z,1516646135.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:35.464Z,1516646135.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:35.855Z,1516646135.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:36.125Z,1516646136.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:36.252Z,1516646136.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:36.559Z,1516646136.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:36.644Z,1516646136.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:37.038Z,1516646137.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:37.355Z,1516646137.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:37.442Z,1516646137.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:37.846Z,1516646137.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:38.153Z,1516646138.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:38.258Z,1516646138.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:38.559Z,1516646138.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:38.648Z,1516646138.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:39.042Z,1516646139.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:39.355Z,1516646139.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:39.439Z,1516646139.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:39.865Z,1516646139.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:40.151Z,1516646140.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:40.244Z,1516646140.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:40.555Z,1516646140.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:40.640Z,1516646140.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:41.061Z,1516646141.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:41.351Z,1516646141.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:41.452Z,1516646141.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:41.873Z,1516646141.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:42.147Z,1516646142.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:42.252Z,1516646142.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:42.551Z,1516646142.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:42.649Z,1516646142.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:43.049Z,1516646143.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:43.062Z,1516646143.062 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T18:35:43.347Z,1516646143.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:43.451Z,1516646143.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:43.866Z,1516646143.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:44.143Z,1516646144.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:44.248Z,1516646144.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:44.547Z,1516646144.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:44.657Z,1516646144.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:45.049Z,1516646145.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:45.343Z,1516646145.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:45.443Z,1516646145.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:45.869Z,1516646145.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:46.139Z,1516646146.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:46.248Z,1516646146.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:46.543Z,1516646146.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:46.635Z,1516646146.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:47.062Z,1516646147.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:47.339Z,1516646147.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:47.458Z,1516646147.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:47.902Z,1516646147.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:48.135Z,1516646148.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:48.249Z,1516646148.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:48.539Z,1516646148.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:48.648Z,1516646148.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:49.049Z,1516646149.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:49.335Z,1516646149.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:49.448Z,1516646149.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:49.854Z,1516646149.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:50.133Z,1516646150.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:50.259Z,1516646150.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:50.583Z,1516646150.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:50.667Z,1516646150.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:51.042Z,1516646151.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:51.379Z,1516646151.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:51.448Z,1516646151.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:51.852Z,1516646151.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:52.177Z,1516646152.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:52.254Z,1516646152.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:52.583Z,1516646152.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:52.648Z,1516646152.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:53.060Z,1516646153.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:53.379Z,1516646153.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:53.456Z,1516646153.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:53.875Z,1516646153.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:54.175Z,1516646154.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:54.257Z,1516646154.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:54.579Z,1516646154.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:54.648Z,1516646154.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:55.037Z,1516646155.037 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:55.038Z,1516646155.038 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-01-22T18:35:55.038Z,1516646155.038 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:35:55.040Z,1516646155.040 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:55.041Z,1516646155.041 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-01-22T18:35:55.041Z,1516646155.041 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:35:55.043Z,1516646155.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:55.043Z,1516646155.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-01-22T18:35:55.043Z,1516646155.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:35:55.055Z,1516646155.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:35:55.055Z,1516646155.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:35:55.055Z,1516646155.055 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:35:55.375Z,1516646155.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:55.479Z,1516646155.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:35:55.479Z,1516646155.479 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-01-22T18:35:55.479Z,1516646155.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:35:55.479Z,1516646155.479 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-01-22T18:35:55.480Z,1516646155.480 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:35:55.480Z,1516646155.480 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-01-22T18:35:55.892Z,1516646155.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:35:55.893Z,1516646155.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:35:55.893Z,1516646155.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:35:55.893Z,1516646155.893 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:35:55.894Z,1516646155.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:35:55.894Z,1516646155.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:35:55.901Z,1516646155.901 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:35:55.906Z,1516646155.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:35:55.908Z,1516646155.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:35:56.173Z,1516646156.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:56.272Z,1516646156.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:56.581Z,1516646156.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:57.375Z,1516646157.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:58.171Z,1516646158.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:58.575Z,1516646158.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:59.371Z,1516646159.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:35:59.560Z,1516646159.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:35:59.692Z,1516646159.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:00.036Z,1516646160.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:00.167Z,1516646160.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:00.438Z,1516646160.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:00.571Z,1516646160.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:00.830Z,1516646160.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:01.230Z,1516646161.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:01.367Z,1516646161.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:01.630Z,1516646161.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:02.028Z,1516646162.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:02.163Z,1516646162.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:02.430Z,1516646162.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:02.567Z,1516646162.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:02.828Z,1516646162.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:03.226Z,1516646163.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:03.363Z,1516646163.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:03.630Z,1516646163.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:04.037Z,1516646164.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:04.161Z,1516646164.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:04.437Z,1516646164.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:04.605Z,1516646164.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:04.836Z,1516646164.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:05.236Z,1516646165.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:05.399Z,1516646165.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:05.631Z,1516646165.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:06.030Z,1516646166.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:06.197Z,1516646166.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:06.432Z,1516646166.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:06.605Z,1516646166.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:06.837Z,1516646166.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:07.237Z,1516646167.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:07.399Z,1516646167.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:07.637Z,1516646167.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:08.032Z,1516646168.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:08.195Z,1516646168.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:08.430Z,1516646168.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:08.599Z,1516646168.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:08.837Z,1516646168.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:09.231Z,1516646169.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:09.395Z,1516646169.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:09.630Z,1516646169.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:10.038Z,1516646170.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:10.192Z,1516646170.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:10.437Z,1516646170.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:10.595Z,1516646170.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:10.840Z,1516646170.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:11.228Z,1516646171.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:11.391Z,1516646171.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:11.634Z,1516646171.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:12.032Z,1516646172.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:12.187Z,1516646172.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:12.440Z,1516646172.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:12.591Z,1516646172.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:12.847Z,1516646172.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:13.244Z,1516646173.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:13.387Z,1516646173.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:13.649Z,1516646173.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:14.040Z,1516646174.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:14.183Z,1516646174.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:14.444Z,1516646174.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:14.587Z,1516646174.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:14.824Z,1516646174.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:15.219Z,1516646175.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:15.383Z,1516646175.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:15.617Z,1516646175.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:16.029Z,1516646176.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:16.179Z,1516646176.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:16.453Z,1516646176.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:16.583Z,1516646176.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:16.833Z,1516646176.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:17.222Z,1516646177.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:17.379Z,1516646177.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:17.621Z,1516646177.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:18.028Z,1516646178.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:18.185Z,1516646178.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:18.432Z,1516646178.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:18.627Z,1516646178.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:18.829Z,1516646178.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:19.229Z,1516646179.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:19.423Z,1516646179.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:19.629Z,1516646179.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:20.023Z,1516646180.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:20.221Z,1516646180.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:20.421Z,1516646180.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:20.627Z,1516646180.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:20.836Z,1516646180.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:21.228Z,1516646181.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:21.423Z,1516646181.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:21.632Z,1516646181.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:22.036Z,1516646182.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:22.219Z,1516646182.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:22.440Z,1516646182.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:22.623Z,1516646182.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:22.836Z,1516646182.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:23.241Z,1516646183.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:23.419Z,1516646183.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:23.636Z,1516646183.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:24.029Z,1516646184.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:24.215Z,1516646184.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:24.444Z,1516646184.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:24.619Z,1516646184.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:24.844Z,1516646184.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:25.252Z,1516646185.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:25.415Z,1516646185.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:25.645Z,1516646185.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:26.040Z,1516646186.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:26.211Z,1516646186.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:26.436Z,1516646186.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:26.615Z,1516646186.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:26.819Z,1516646186.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:27.220Z,1516646187.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:27.411Z,1516646187.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:27.624Z,1516646187.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:28.048Z,1516646188.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:28.207Z,1516646188.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:28.448Z,1516646188.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:28.611Z,1516646188.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:28.845Z,1516646188.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:29.220Z,1516646189.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:29.407Z,1516646189.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:29.624Z,1516646189.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:30.048Z,1516646190.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:30.203Z,1516646190.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:30.448Z,1516646190.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:30.607Z,1516646190.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:30.829Z,1516646190.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:31.234Z,1516646191.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:31.404Z,1516646191.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:31.631Z,1516646191.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:32.029Z,1516646192.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:32.201Z,1516646192.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:32.428Z,1516646192.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:32.643Z,1516646192.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:32.830Z,1516646192.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:33.230Z,1516646193.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:33.442Z,1516646193.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:33.637Z,1516646193.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:34.027Z,1516646194.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:34.237Z,1516646194.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:34.422Z,1516646194.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:34.651Z,1516646194.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:34.831Z,1516646194.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:35.236Z,1516646195.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:35.447Z,1516646195.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:35.622Z,1516646195.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:36.039Z,1516646196.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:36.245Z,1516646196.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:36.448Z,1516646196.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:36.647Z,1516646196.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:36.835Z,1516646196.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:37.227Z,1516646197.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:37.443Z,1516646197.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:37.635Z,1516646197.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:38.039Z,1516646198.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:38.239Z,1516646198.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:38.425Z,1516646198.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:38.643Z,1516646198.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:38.836Z,1516646198.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:39.240Z,1516646199.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:39.439Z,1516646199.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:39.640Z,1516646199.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:40.032Z,1516646200.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:40.235Z,1516646200.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:40.430Z,1516646200.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:40.639Z,1516646200.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:40.843Z,1516646200.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:41.244Z,1516646201.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:41.435Z,1516646201.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:41.641Z,1516646201.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:42.032Z,1516646202.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:42.231Z,1516646202.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:42.432Z,1516646202.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:42.635Z,1516646202.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:42.847Z,1516646202.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:43.248Z,1516646203.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:43.431Z,1516646203.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:43.643Z,1516646203.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:44.035Z,1516646204.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:44.227Z,1516646204.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:44.429Z,1516646204.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:44.631Z,1516646204.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:44.831Z,1516646204.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x25854 got:0x58887
2018-01-22T18:36:44.849Z,1516646204.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:45.241Z,1516646205.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:45.427Z,1516646205.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:45.641Z,1516646205.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:46.036Z,1516646206.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:46.225Z,1516646206.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:46.413Z,1516646206.413 [PNI_TCM](ERROR): CRC does not match. Expected:0x31227 got:0x29760
2018-01-22T18:36:46.433Z,1516646206.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:46.667Z,1516646206.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:46.839Z,1516646206.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:47.242Z,1516646207.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:47.463Z,1516646207.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:47.641Z,1516646207.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:48.038Z,1516646208.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:48.261Z,1516646208.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:48.440Z,1516646208.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:48.675Z,1516646208.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:48.841Z,1516646208.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:49.245Z,1516646209.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:49.473Z,1516646209.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:49.660Z,1516646209.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:50.037Z,1516646210.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:50.291Z,1516646210.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:50.440Z,1516646210.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:50.695Z,1516646210.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:50.860Z,1516646210.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:51.248Z,1516646211.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:51.491Z,1516646211.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:51.646Z,1516646211.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:52.044Z,1516646212.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:52.287Z,1516646212.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:52.443Z,1516646212.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:52.691Z,1516646212.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:52.845Z,1516646212.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:53.254Z,1516646213.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:53.487Z,1516646213.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:53.656Z,1516646213.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:54.049Z,1516646214.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:54.283Z,1516646214.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:54.433Z,1516646214.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:54.689Z,1516646214.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:54.832Z,1516646214.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:55.236Z,1516646215.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:55.483Z,1516646215.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:55.656Z,1516646215.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:56.027Z,1516646216.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x37371 got:0x901
2018-01-22T18:36:56.060Z,1516646216.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:56.064Z,1516646216.064 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T18:31:55.7Z
2018-01-22T18:36:56.064Z,1516646216.064 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T18:36:56.064Z,1516646216.064 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T18:36:56.279Z,1516646216.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:56.433Z,1516646216.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:56.683Z,1516646216.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:57.480Z,1516646217.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:58.275Z,1516646218.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:58.679Z,1516646218.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:59.475Z,1516646219.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:36:59.824Z,1516646219.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:36:59.915Z,1516646219.915 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0008.lzma
2018-01-22T18:36:59.984Z,1516646219.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:00.273Z,1516646220.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:00.344Z,1516646220.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:00.649Z,1516646220.649 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0008.lzma.bak
2018-01-22T18:37:00.649Z,1516646220.649 [DataOverHttps](INFO): SBD MOMSN=7750804
2018-01-22T18:37:00.695Z,1516646220.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:00.711Z,1516646220.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:01.507Z,1516646221.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:01.998Z,1516646221.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:02.135Z,1516646222.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:02.303Z,1516646222.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:02.707Z,1516646222.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:05.447Z,1516646225.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:05.604Z,1516646225.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:05.988Z,1516646225.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:06.320Z,1516646226.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:06.713Z,1516646226.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:07.114Z,1516646227.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:10.459Z,1516646230.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:10.536Z,1516646230.536 [DataOverHttps](INFO): Sending 159 bytes from file Logs/20180122T180533/Express0009.lzma
2018-01-22T18:37:10.644Z,1516646230.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:10.941Z,1516646230.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:11.292Z,1516646231.292 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0009.lzma.bak
2018-01-22T18:37:11.292Z,1516646231.292 [DataOverHttps](INFO): SBD MOMSN=7750806
2018-01-22T18:37:11.363Z,1516646231.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:11.929Z,1516646231.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:11.997Z,1516646231.997 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T18:37:11.997Z,1516646231.997 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T18:37:11.997Z,1516646231.997 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T18:37:12.125Z,1516646232.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:15.390Z,1516646235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:15.544Z,1516646235.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:15.889Z,1516646235.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:16.344Z,1516646236.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:16.670Z,1516646236.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:17.072Z,1516646237.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:17.484Z,1516646237.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:17.880Z,1516646237.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:18.285Z,1516646238.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:18.685Z,1516646238.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:19.072Z,1516646239.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:19.471Z,1516646239.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:19.885Z,1516646239.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:20.292Z,1516646240.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:20.696Z,1516646240.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:21.084Z,1516646241.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:21.475Z,1516646241.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:21.888Z,1516646241.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:22.296Z,1516646242.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:22.685Z,1516646242.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:23.067Z,1516646243.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:23.472Z,1516646243.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:23.878Z,1516646243.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:24.292Z,1516646244.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:24.684Z,1516646244.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:25.072Z,1516646245.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:25.471Z,1516646245.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:25.543Z,1516646245.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:25.884Z,1516646245.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:26.287Z,1516646246.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:26.339Z,1516646246.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:26.692Z,1516646246.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:26.743Z,1516646246.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:27.084Z,1516646247.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:27.476Z,1516646247.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:27.539Z,1516646247.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:27.884Z,1516646247.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:28.335Z,1516646248.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:28.342Z,1516646248.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:28.685Z,1516646248.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:28.779Z,1516646248.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:29.076Z,1516646249.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:29.480Z,1516646249.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:29.575Z,1516646249.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:29.886Z,1516646249.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:30.343Z,1516646250.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:30.371Z,1516646250.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:30.685Z,1516646250.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:30.775Z,1516646250.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:31.078Z,1516646251.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:31.478Z,1516646251.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:31.571Z,1516646251.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:31.900Z,1516646251.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:32.293Z,1516646252.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:32.368Z,1516646252.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:32.690Z,1516646252.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:32.771Z,1516646252.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:33.064Z,1516646253.064 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:37:33.064Z,1516646253.064 [BPC1] Communications Fault, FailCount= 6
2018-01-22T18:37:33.064Z,1516646253.064 [BPC1](ERROR): Communications Fault
2018-01-22T18:37:33.091Z,1516646253.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:33.136Z,1516646253.136 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:37:33.480Z,1516646253.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:33.567Z,1516646253.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:33.888Z,1516646253.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:34.289Z,1516646254.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:34.302Z,1516646254.302 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:37:34.302Z,1516646254.302 [BPC1] No Fault, FailCount= 6
2018-01-22T18:37:34.363Z,1516646254.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:34.740Z,1516646254.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:34.767Z,1516646254.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:35.084Z,1516646255.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:35.463Z,1516646255.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:35.563Z,1516646255.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:35.889Z,1516646255.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:36.304Z,1516646256.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:36.359Z,1516646256.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:36.696Z,1516646256.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:36.763Z,1516646256.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:37.067Z,1516646257.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:37.472Z,1516646257.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:37.559Z,1516646257.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:37.877Z,1516646257.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:38.296Z,1516646258.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:38.355Z,1516646258.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:38.697Z,1516646258.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:38.759Z,1516646258.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:39.072Z,1516646259.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:39.476Z,1516646259.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:39.555Z,1516646259.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:39.902Z,1516646259.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:40.301Z,1516646260.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:40.351Z,1516646260.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:40.681Z,1516646260.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:41.063Z,1516646261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:41.147Z,1516646261.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:41.463Z,1516646261.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:41.908Z,1516646261.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:41.944Z,1516646261.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:42.277Z,1516646262.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:42.687Z,1516646262.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:42.739Z,1516646262.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:43.077Z,1516646263.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:43.472Z,1516646263.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:43.535Z,1516646263.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:43.868Z,1516646263.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:44.264Z,1516646264.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:44.332Z,1516646264.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:44.668Z,1516646264.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:44.923Z,1516646264.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:45.082Z,1516646265.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:45.327Z,1516646265.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:45.493Z,1516646265.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:45.731Z,1516646265.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:45.884Z,1516646265.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:46.280Z,1516646266.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:46.431Z,1516646266.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:46.668Z,1516646266.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:47.064Z,1516646267.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:47.227Z,1516646267.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:47.468Z,1516646267.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:47.872Z,1516646267.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:48.023Z,1516646268.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:48.244Z,1516646268.244 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T18:37:48.244Z,1516646268.244 [NAL9602] Data Fault, FailCount= 3
2018-01-22T18:37:48.244Z,1516646268.244 [NAL9602](ERROR): Data Fault
2018-01-22T18:37:48.276Z,1516646268.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:48.309Z,1516646268.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T18:37:48.427Z,1516646268.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:48.636Z,1516646268.636 [NAL9602](INFO): Powering down
2018-01-22T18:37:48.677Z,1516646268.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:49.070Z,1516646269.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:49.223Z,1516646269.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:49.469Z,1516646269.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:49.482Z,1516646269.482 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T18:37:49.482Z,1516646269.482 [NAL9602] No Fault, FailCount= 3
2018-01-22T18:37:49.883Z,1516646269.883 [BPC1](INFO): Initialized
2018-01-22T18:37:49.889Z,1516646269.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:50.021Z,1516646270.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:50.277Z,1516646270.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:50.431Z,1516646270.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:50.671Z,1516646270.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:51.081Z,1516646271.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:51.227Z,1516646271.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:51.474Z,1516646271.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:51.878Z,1516646271.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:52.025Z,1516646272.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:52.283Z,1516646272.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:52.431Z,1516646272.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:52.676Z,1516646272.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:53.078Z,1516646273.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:53.227Z,1516646273.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:53.480Z,1516646273.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:53.868Z,1516646273.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:54.030Z,1516646274.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:54.280Z,1516646274.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:54.488Z,1516646274.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:54.680Z,1516646274.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:55.070Z,1516646275.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:55.283Z,1516646275.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:55.482Z,1516646275.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:55.887Z,1516646275.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:56.079Z,1516646276.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:56.289Z,1516646276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:56.677Z,1516646276.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:56.815Z,1516646276.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:57.079Z,1516646277.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:57.480Z,1516646277.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:57.611Z,1516646277.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:57.884Z,1516646277.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:58.309Z,1516646278.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:58.407Z,1516646278.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:58.681Z,1516646278.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:58.844Z,1516646278.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:59.081Z,1516646279.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:59.464Z,1516646279.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:37:59.639Z,1516646279.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:37:59.896Z,1516646279.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:00.285Z,1516646280.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:00.435Z,1516646280.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:00.690Z,1516646280.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:00.839Z,1516646280.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:01.097Z,1516646281.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:01.469Z,1516646281.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:01.635Z,1516646281.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:01.876Z,1516646281.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:02.280Z,1516646282.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:02.431Z,1516646282.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:02.734Z,1516646282.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:02.835Z,1516646282.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:03.082Z,1516646283.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:03.484Z,1516646283.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:03.632Z,1516646283.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:03.880Z,1516646283.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:04.288Z,1516646284.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:04.427Z,1516646284.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:04.692Z,1516646284.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:04.831Z,1516646284.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:05.118Z,1516646285.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:05.533Z,1516646285.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:05.627Z,1516646285.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:05.879Z,1516646285.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:06.285Z,1516646286.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:06.423Z,1516646286.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:06.689Z,1516646286.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:06.827Z,1516646286.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:07.059Z,1516646287.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:07.484Z,1516646287.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:07.623Z,1516646287.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:07.867Z,1516646287.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:08.268Z,1516646288.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:08.421Z,1516646288.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:08.668Z,1516646288.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:08.827Z,1516646288.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:09.068Z,1516646289.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:09.466Z,1516646289.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:09.624Z,1516646289.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:09.876Z,1516646289.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:10.271Z,1516646290.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:10.419Z,1516646290.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:10.672Z,1516646290.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:10.823Z,1516646290.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:11.071Z,1516646291.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:11.472Z,1516646291.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:11.619Z,1516646291.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:11.865Z,1516646291.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:12.269Z,1516646292.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:12.415Z,1516646292.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:12.674Z,1516646292.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:12.819Z,1516646292.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:13.615Z,1516646293.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:14.411Z,1516646294.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:14.815Z,1516646294.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:15.611Z,1516646295.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:15.911Z,1516646295.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:16.101Z,1516646296.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:16.375Z,1516646296.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:16.407Z,1516646296.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:16.780Z,1516646296.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:16.811Z,1516646296.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:17.171Z,1516646297.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:17.580Z,1516646297.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:17.607Z,1516646297.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:17.969Z,1516646297.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:18.375Z,1516646298.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:18.411Z,1516646298.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:18.741Z,1516646298.741 [NAL9602](INFO): Powering up NAL9602
2018-01-22T18:38:18.788Z,1516646298.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:18.815Z,1516646298.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:19.179Z,1516646299.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:19.575Z,1516646299.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:19.611Z,1516646299.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:19.976Z,1516646299.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:20.371Z,1516646300.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:20.407Z,1516646300.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:20.776Z,1516646300.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:20.811Z,1516646300.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:21.168Z,1516646301.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:21.566Z,1516646301.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:21.607Z,1516646301.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:21.972Z,1516646301.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:22.371Z,1516646302.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:22.403Z,1516646302.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:22.784Z,1516646302.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:23.176Z,1516646303.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:23.199Z,1516646303.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:23.591Z,1516646303.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:23.963Z,1516646303.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:23.996Z,1516646303.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:24.394Z,1516646304.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:24.772Z,1516646304.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:24.791Z,1516646304.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:25.171Z,1516646305.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:25.580Z,1516646305.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:25.587Z,1516646305.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:25.980Z,1516646305.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:26.384Z,1516646306.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:26.448Z,1516646306.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:26.781Z,1516646306.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:26.791Z,1516646306.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:27.181Z,1516646307.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:27.195Z,1516646307.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:27.583Z,1516646307.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:27.599Z,1516646307.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:27.981Z,1516646307.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:28.390Z,1516646308.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:28.395Z,1516646308.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:28.789Z,1516646308.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:28.799Z,1516646308.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:29.185Z,1516646309.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:29.592Z,1516646309.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:29.595Z,1516646309.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:29.936Z,1516646309.936 [NAL9602](INFO): NAL9602 initialized
2018-01-22T18:38:29.984Z,1516646309.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:30.391Z,1516646310.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:30.393Z,1516646310.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:30.795Z,1516646310.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:30.796Z,1516646310.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:31.188Z,1516646311.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:31.591Z,1516646311.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:31.595Z,1516646311.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:31.994Z,1516646311.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:32.380Z,1516646312.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:32.387Z,1516646312.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:32.772Z,1516646312.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:32.791Z,1516646312.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:33.175Z,1516646313.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:33.602Z,1516646313.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:33.981Z,1516646313.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:34.401Z,1516646314.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:34.788Z,1516646314.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:35.182Z,1516646315.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:35.584Z,1516646315.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:35.591Z,1516646315.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:35.988Z,1516646315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:36.387Z,1516646316.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:36.394Z,1516646316.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:36.791Z,1516646316.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:36.793Z,1516646316.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:37.196Z,1516646317.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:37.586Z,1516646317.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:37.587Z,1516646317.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:37.991Z,1516646317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:38.364Z,1516646318.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:38.385Z,1516646318.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:38.780Z,1516646318.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:38.875Z,1516646318.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:39.171Z,1516646319.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:39.611Z,1516646319.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:39.671Z,1516646319.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:39.982Z,1516646319.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:40.445Z,1516646320.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:40.467Z,1516646320.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:40.780Z,1516646320.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:40.879Z,1516646320.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:41.175Z,1516646321.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:41.580Z,1516646321.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:41.675Z,1516646321.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:41.976Z,1516646321.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:42.389Z,1516646322.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:42.472Z,1516646322.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:42.800Z,1516646322.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:42.875Z,1516646322.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:43.203Z,1516646323.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:43.567Z,1516646323.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:43.671Z,1516646323.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:43.972Z,1516646323.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:44.384Z,1516646324.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:44.467Z,1516646324.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:44.774Z,1516646324.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:44.871Z,1516646324.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:38:45.183Z,1516646325.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:45.588Z,1516646325.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:45.983Z,1516646325.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:46.389Z,1516646326.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:46.780Z,1516646326.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:47.174Z,1516646327.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:47.586Z,1516646327.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:47.978Z,1516646327.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:48.384Z,1516646328.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:48.793Z,1516646328.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:49.195Z,1516646329.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:49.578Z,1516646329.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:49.983Z,1516646329.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:50.378Z,1516646330.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:50.784Z,1516646330.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:51.182Z,1516646331.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:51.585Z,1516646331.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:51.988Z,1516646331.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:52.433Z,1516646332.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:52.768Z,1516646332.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:53.173Z,1516646333.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:53.572Z,1516646333.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:53.992Z,1516646333.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:54.397Z,1516646334.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:54.781Z,1516646334.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.204Z,1516646335.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.572Z,1516646335.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.974Z,1516646335.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.974Z,1516646335.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-01-22T18:38:55.974Z,1516646335.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:38:55.980Z,1516646335.980 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.980Z,1516646335.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-01-22T18:38:55.980Z,1516646335.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:38:55.982Z,1516646335.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:55.982Z,1516646335.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-01-22T18:38:55.982Z,1516646335.982 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:38:56.011Z,1516646336.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:38:56.011Z,1516646336.011 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:38:56.011Z,1516646336.011 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:38:56.397Z,1516646336.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:38:56.398Z,1516646336.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-01-22T18:38:56.398Z,1516646336.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:38:56.398Z,1516646336.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-01-22T18:38:56.399Z,1516646336.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:38:56.399Z,1516646336.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-01-22T18:38:56.785Z,1516646336.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:38:56.785Z,1516646336.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:38:56.786Z,1516646336.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:38:56.786Z,1516646336.786 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:38:56.786Z,1516646336.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:38:56.787Z,1516646336.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:38:56.787Z,1516646336.787 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:38:56.788Z,1516646336.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:38:56.788Z,1516646336.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:38:57.187Z,1516646337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:57.590Z,1516646337.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:57.992Z,1516646337.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:58.391Z,1516646338.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:58.776Z,1516646338.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:59.168Z,1516646339.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:59.569Z,1516646339.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:38:59.996Z,1516646339.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:00.391Z,1516646340.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:00.793Z,1516646340.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:01.196Z,1516646341.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:01.572Z,1516646341.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:01.971Z,1516646341.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:02.388Z,1516646342.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:02.775Z,1516646342.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:03.177Z,1516646343.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:03.582Z,1516646343.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:03.979Z,1516646343.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:04.393Z,1516646344.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:04.778Z,1516646344.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:05.172Z,1516646345.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:05.577Z,1516646345.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:05.979Z,1516646345.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:06.380Z,1516646346.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:06.790Z,1516646346.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:07.189Z,1516646347.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:07.581Z,1516646347.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:07.983Z,1516646347.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:08.384Z,1516646348.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:08.785Z,1516646348.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:09.187Z,1516646349.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:09.590Z,1516646349.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:09.995Z,1516646349.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:10.398Z,1516646350.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:10.784Z,1516646350.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:11.167Z,1516646351.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:11.569Z,1516646351.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:11.977Z,1516646351.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:12.382Z,1516646352.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:12.783Z,1516646352.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:16.010Z,1516646356.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:16.187Z,1516646356.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:16.475Z,1516646356.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:16.881Z,1516646356.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:17.288Z,1516646357.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:17.695Z,1516646357.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:18.089Z,1516646358.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:18.476Z,1516646358.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:18.880Z,1516646358.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:19.302Z,1516646359.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:19.689Z,1516646359.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:20.096Z,1516646360.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:20.528Z,1516646360.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:20.872Z,1516646360.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:21.295Z,1516646361.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:21.699Z,1516646361.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:21.763Z,1516646361.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:22.098Z,1516646362.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:22.541Z,1516646362.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:22.559Z,1516646362.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:22.876Z,1516646362.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:22.963Z,1516646362.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:23.282Z,1516646363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:23.681Z,1516646363.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:24.121Z,1516646364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:24.474Z,1516646364.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:24.882Z,1516646364.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:25.282Z,1516646365.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:25.688Z,1516646365.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:26.081Z,1516646366.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:26.487Z,1516646366.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:26.879Z,1516646366.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:27.293Z,1516646367.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:27.689Z,1516646367.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:28.090Z,1516646368.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:28.492Z,1516646368.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:28.868Z,1516646368.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:29.300Z,1516646369.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:29.698Z,1516646369.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:30.100Z,1516646370.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:30.476Z,1516646370.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:30.884Z,1516646370.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:31.284Z,1516646371.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:31.689Z,1516646371.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:32.099Z,1516646372.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:32.489Z,1516646372.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:32.881Z,1516646372.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:33.281Z,1516646373.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:33.687Z,1516646373.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:34.081Z,1516646374.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:34.548Z,1516646374.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:34.893Z,1516646374.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:35.291Z,1516646375.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:35.685Z,1516646375.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:36.083Z,1516646376.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:36.498Z,1516646376.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:36.879Z,1516646376.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:37.276Z,1516646377.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:37.686Z,1516646377.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:38.081Z,1516646378.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:38.496Z,1516646378.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:38.879Z,1516646378.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:39.276Z,1516646379.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:39.687Z,1516646379.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:40.076Z,1516646380.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:40.504Z,1516646380.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:40.889Z,1516646380.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:41.290Z,1516646381.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:41.685Z,1516646381.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:42.106Z,1516646382.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:42.491Z,1516646382.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:42.876Z,1516646382.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:43.272Z,1516646383.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:43.682Z,1516646383.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:44.101Z,1516646384.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:44.505Z,1516646384.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:44.876Z,1516646384.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:45.275Z,1516646385.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:45.684Z,1516646385.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:46.077Z,1516646386.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:46.484Z,1516646386.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:46.892Z,1516646386.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:47.287Z,1516646387.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:47.677Z,1516646387.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:48.088Z,1516646388.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:48.477Z,1516646388.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:48.881Z,1516646388.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:49.285Z,1516646389.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:49.687Z,1516646389.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:49.771Z,1516646389.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:50.090Z,1516646390.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:50.534Z,1516646390.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:50.567Z,1516646390.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:50.871Z,1516646390.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:50.987Z,1516646390.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:39:51.272Z,1516646391.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:51.672Z,1516646391.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:52.076Z,1516646392.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:52.478Z,1516646392.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:52.902Z,1516646392.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:53.282Z,1516646393.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:53.676Z,1516646393.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:54.080Z,1516646394.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:54.473Z,1516646394.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:54.880Z,1516646394.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:55.284Z,1516646395.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:55.688Z,1516646395.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:56.083Z,1516646396.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:56.492Z,1516646396.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:56.883Z,1516646396.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:57.284Z,1516646397.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:57.692Z,1516646397.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:58.084Z,1516646398.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:58.497Z,1516646398.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:58.886Z,1516646398.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:59.299Z,1516646399.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:39:59.688Z,1516646399.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:00.068Z,1516646400.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:00.476Z,1516646400.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:00.872Z,1516646400.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:01.272Z,1516646401.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:01.682Z,1516646401.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:02.086Z,1516646402.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:02.482Z,1516646402.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:02.878Z,1516646402.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:03.276Z,1516646403.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:03.688Z,1516646403.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:03.795Z,1516646403.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:04.076Z,1516646404.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:04.488Z,1516646404.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:04.591Z,1516646404.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:04.897Z,1516646404.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:04.995Z,1516646404.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:05.290Z,1516646405.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:05.682Z,1516646405.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:06.068Z,1516646406.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:06.472Z,1516646406.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:06.868Z,1516646406.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:07.272Z,1516646407.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:07.694Z,1516646407.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:08.100Z,1516646408.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:08.495Z,1516646408.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:08.872Z,1516646408.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:09.276Z,1516646409.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:09.672Z,1516646409.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:10.072Z,1516646410.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:10.478Z,1516646410.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:10.901Z,1516646410.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:11.282Z,1516646411.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:11.676Z,1516646411.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:12.076Z,1516646412.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:12.479Z,1516646412.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:12.878Z,1516646412.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:16.137Z,1516646416.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:16.288Z,1516646416.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:16.644Z,1516646416.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:17.039Z,1516646417.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:17.432Z,1516646417.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:17.803Z,1516646417.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:17.836Z,1516646417.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:18.244Z,1516646418.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:18.599Z,1516646418.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:18.656Z,1516646418.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:19.021Z,1516646419.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:19.046Z,1516646419.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:19.445Z,1516646419.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:19.815Z,1516646419.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:19.837Z,1516646419.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:20.292Z,1516646420.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:20.611Z,1516646420.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:20.644Z,1516646420.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:21.015Z,1516646421.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:21.048Z,1516646421.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:21.456Z,1516646421.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:21.858Z,1516646421.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:22.298Z,1516646422.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:22.625Z,1516646422.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:23.028Z,1516646423.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:23.432Z,1516646423.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:23.836Z,1516646423.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:24.310Z,1516646424.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:24.638Z,1516646424.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:25.044Z,1516646425.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:25.438Z,1516646425.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:25.836Z,1516646425.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:26.289Z,1516646426.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:26.642Z,1516646426.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:27.036Z,1516646427.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:27.445Z,1516646427.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:27.853Z,1516646427.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:28.246Z,1516646428.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:28.630Z,1516646428.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:29.027Z,1516646429.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:29.432Z,1516646429.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:29.828Z,1516646429.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:30.232Z,1516646430.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:30.664Z,1516646430.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:31.044Z,1516646431.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:31.444Z,1516646431.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:31.819Z,1516646431.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:31.837Z,1516646431.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:32.234Z,1516646432.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:32.615Z,1516646432.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:32.684Z,1516646432.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:33.032Z,1516646433.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:33.051Z,1516646433.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:33.444Z,1516646433.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:33.845Z,1516646433.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:33.847Z,1516646433.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:34.296Z,1516646434.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:34.640Z,1516646434.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:34.643Z,1516646434.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:35.041Z,1516646435.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:35.047Z,1516646435.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:35.456Z,1516646435.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:35.847Z,1516646435.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:36.305Z,1516646436.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:36.632Z,1516646436.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:37.027Z,1516646437.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:37.457Z,1516646437.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:37.855Z,1516646437.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:38.312Z,1516646438.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:38.632Z,1516646438.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:39.032Z,1516646439.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:39.440Z,1516646439.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:39.845Z,1516646439.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:40.316Z,1516646440.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:40.632Z,1516646440.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:41.033Z,1516646441.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:41.440Z,1516646441.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:41.852Z,1516646441.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:42.241Z,1516646442.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:42.644Z,1516646442.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:43.040Z,1516646443.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:43.450Z,1516646443.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:43.848Z,1516646443.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:44.252Z,1516646444.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:44.677Z,1516646444.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:45.032Z,1516646445.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:45.458Z,1516646445.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:45.863Z,1516646445.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:45.899Z,1516646445.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:46.242Z,1516646446.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:46.681Z,1516646446.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:46.703Z,1516646446.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:47.030Z,1516646447.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:47.107Z,1516646447.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:40:47.438Z,1516646447.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:47.848Z,1516646447.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:48.327Z,1516646448.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:48.641Z,1516646448.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:49.038Z,1516646449.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:49.446Z,1516646449.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:49.859Z,1516646449.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:50.331Z,1516646450.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:50.640Z,1516646450.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:51.043Z,1516646451.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:51.445Z,1516646451.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:51.845Z,1516646451.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:52.305Z,1516646452.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:52.639Z,1516646452.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:53.045Z,1516646453.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:53.459Z,1516646453.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:53.847Z,1516646453.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:54.305Z,1516646454.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:54.642Z,1516646454.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:55.042Z,1516646455.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:55.451Z,1516646455.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:55.848Z,1516646455.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:56.246Z,1516646456.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:56.658Z,1516646456.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:57.036Z,1516646457.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:57.438Z,1516646457.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:57.860Z,1516646457.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:58.238Z,1516646458.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:58.672Z,1516646458.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:59.029Z,1516646459.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:59.449Z,1516646459.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:40:59.857Z,1516646459.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:00.237Z,1516646460.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:00.701Z,1516646460.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:01.041Z,1516646461.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:01.449Z,1516646461.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:01.848Z,1516646461.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:02.247Z,1516646462.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:02.624Z,1516646462.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:03.023Z,1516646463.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:03.444Z,1516646463.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:03.852Z,1516646463.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:04.252Z,1516646464.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:04.627Z,1516646464.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:05.036Z,1516646465.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:05.438Z,1516646465.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:05.837Z,1516646465.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:06.237Z,1516646466.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:06.641Z,1516646466.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:07.032Z,1516646467.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:07.444Z,1516646467.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:07.843Z,1516646467.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:08.244Z,1516646468.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:08.640Z,1516646468.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:09.035Z,1516646469.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:09.446Z,1516646469.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:09.850Z,1516646469.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:10.246Z,1516646470.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:10.641Z,1516646470.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:11.044Z,1516646471.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:11.448Z,1516646471.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:11.854Z,1516646471.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:12.249Z,1516646472.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:12.705Z,1516646472.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:13.048Z,1516646473.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:16.351Z,1516646476.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:16.503Z,1516646476.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:16.859Z,1516646476.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:17.260Z,1516646477.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:17.640Z,1516646477.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:18.039Z,1516646478.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:18.461Z,1516646478.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:18.843Z,1516646478.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:19.261Z,1516646479.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:19.640Z,1516646479.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:20.045Z,1516646480.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:20.436Z,1516646480.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:20.848Z,1516646480.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:21.235Z,1516646481.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:21.653Z,1516646481.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:22.041Z,1516646482.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x41291 got:0x54040
2018-01-22T18:41:22.075Z,1516646482.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:22.446Z,1516646482.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:22.840Z,1516646482.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:23.252Z,1516646483.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:23.639Z,1516646483.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:24.046Z,1516646484.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:24.471Z,1516646484.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:24.860Z,1516646484.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:25.242Z,1516646485.242 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-22T18:41:25.275Z,1516646485.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:25.652Z,1516646485.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:26.039Z,1516646486.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:26.452Z,1516646486.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:26.847Z,1516646486.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:27.238Z,1516646487.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:27.651Z,1516646487.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:28.060Z,1516646488.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:28.450Z,1516646488.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:28.844Z,1516646488.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:29.241Z,1516646489.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:29.644Z,1516646489.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:30.040Z,1516646490.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:30.453Z,1516646490.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:30.851Z,1516646490.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:31.268Z,1516646491.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:31.664Z,1516646491.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:32.052Z,1516646492.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:32.432Z,1516646492.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:32.829Z,1516646492.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:33.231Z,1516646493.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:33.645Z,1516646493.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:34.044Z,1516646494.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:34.453Z,1516646494.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:34.835Z,1516646494.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:35.243Z,1516646495.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:35.642Z,1516646495.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:36.045Z,1516646496.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:36.424Z,1516646496.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:36.854Z,1516646496.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:37.252Z,1516646497.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:37.668Z,1516646497.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:38.024Z,1516646498.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:38.479Z,1516646498.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:38.856Z,1516646498.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:39.252Z,1516646499.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:39.661Z,1516646499.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:40.067Z,1516646500.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:40.460Z,1516646500.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:40.835Z,1516646500.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:41.236Z,1516646501.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:41.635Z,1516646501.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:42.046Z,1516646502.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:42.440Z,1516646502.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:42.841Z,1516646502.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:43.244Z,1516646503.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:43.656Z,1516646503.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:44.032Z,1516646504.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:44.429Z,1516646504.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:44.844Z,1516646504.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:45.236Z,1516646505.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:45.644Z,1516646505.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:46.044Z,1516646506.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:46.441Z,1516646506.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:46.831Z,1516646506.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:47.240Z,1516646507.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:47.638Z,1516646507.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:48.038Z,1516646508.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:48.439Z,1516646508.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:48.842Z,1516646508.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:49.252Z,1516646509.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:49.645Z,1516646509.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:50.038Z,1516646510.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:50.441Z,1516646510.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:50.844Z,1516646510.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:51.241Z,1516646511.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:51.667Z,1516646511.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:52.049Z,1516646512.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:52.494Z,1516646512.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:52.840Z,1516646512.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:53.224Z,1516646513.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:53.623Z,1516646513.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:54.046Z,1516646514.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:54.423Z,1516646514.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:54.855Z,1516646514.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:55.254Z,1516646515.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:55.642Z,1516646515.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.036Z,1516646516.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.438Z,1516646516.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.833Z,1516646516.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.833Z,1516646516.833 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-01-22T18:41:56.833Z,1516646516.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:41:56.835Z,1516646516.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.835Z,1516646516.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-01-22T18:41:56.835Z,1516646516.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:41:56.837Z,1516646516.837 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:56.837Z,1516646516.837 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-01-22T18:41:56.837Z,1516646516.837 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:41:56.849Z,1516646516.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:41:56.849Z,1516646516.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:41:56.849Z,1516646516.849 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:41:57.253Z,1516646517.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:41:57.253Z,1516646517.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-01-22T18:41:57.253Z,1516646517.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:41:57.253Z,1516646517.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-01-22T18:41:57.254Z,1516646517.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:41:57.254Z,1516646517.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-01-22T18:41:57.651Z,1516646517.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:41:57.651Z,1516646517.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:41:57.652Z,1516646517.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:41:57.652Z,1516646517.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:41:57.652Z,1516646517.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:41:57.653Z,1516646517.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:41:57.653Z,1516646517.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:41:57.653Z,1516646517.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:41:57.654Z,1516646517.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:41:58.045Z,1516646518.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:58.456Z,1516646518.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:58.840Z,1516646518.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:59.247Z,1516646519.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:41:59.628Z,1516646519.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:00.024Z,1516646520.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:00.463Z,1516646520.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:00.838Z,1516646520.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:01.237Z,1516646521.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:01.638Z,1516646521.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:02.038Z,1516646522.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:02.454Z,1516646522.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:02.837Z,1516646522.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:03.232Z,1516646523.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:03.644Z,1516646523.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:04.044Z,1516646524.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:04.449Z,1516646524.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:04.832Z,1516646524.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:05.240Z,1516646525.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:05.636Z,1516646525.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:06.036Z,1516646526.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:06.494Z,1516646526.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:06.846Z,1516646526.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:07.257Z,1516646527.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:07.638Z,1516646527.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:08.032Z,1516646528.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:08.436Z,1516646528.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:08.841Z,1516646528.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:09.231Z,1516646529.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:09.638Z,1516646529.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:10.037Z,1516646530.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:10.437Z,1516646530.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:10.845Z,1516646530.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:11.235Z,1516646531.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:11.634Z,1516646531.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:12.033Z,1516646532.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:12.472Z,1516646532.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:12.479Z,1516646532.479 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T18:42:12.479Z,1516646532.479 [Default:CheckIn:C.Wait] Stopped
2018-01-22T18:42:12.479Z,1516646532.479 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T18:42:12.479Z,1516646532.479 [Default:CheckIn:D] Running Loop=1
2018-01-22T18:42:12.852Z,1516646532.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:12.859Z,1516646532.859 [Default:CheckIn:D] Stopped
2018-01-22T18:42:12.859Z,1516646532.859 [Default:CheckIn:E] Running Loop=1
2018-01-22T18:42:13.248Z,1516646533.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:13.251Z,1516646533.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.802850 min 
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn:E] Stopped
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn] Stopped
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn](INFO): Running loop #3
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn] Running Loop=3
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T18:42:13.252Z,1516646533.252 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T18:42:16.598Z,1516646536.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:16.740Z,1516646536.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:17.061Z,1516646537.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:17.490Z,1516646537.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:17.865Z,1516646537.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:18.261Z,1516646538.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:18.678Z,1516646538.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:19.071Z,1516646539.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:19.470Z,1516646539.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:19.872Z,1516646539.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:20.264Z,1516646540.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:20.669Z,1516646540.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:21.069Z,1516646541.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:21.473Z,1516646541.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:21.881Z,1516646541.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:22.276Z,1516646542.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:22.678Z,1516646542.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:23.071Z,1516646543.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:23.472Z,1516646543.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:23.868Z,1516646543.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:24.264Z,1516646544.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:24.677Z,1516646544.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:25.077Z,1516646545.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:25.486Z,1516646545.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:25.871Z,1516646545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:26.278Z,1516646546.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:26.697Z,1516646546.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:27.059Z,1516646547.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:27.476Z,1516646547.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:27.880Z,1516646547.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:28.284Z,1516646548.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:28.688Z,1516646548.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:29.081Z,1516646549.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:29.475Z,1516646549.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:29.885Z,1516646549.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:30.274Z,1516646550.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:30.684Z,1516646550.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:31.092Z,1516646551.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:31.488Z,1516646551.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:31.870Z,1516646551.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:32.270Z,1516646552.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:32.716Z,1516646552.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:33.108Z,1516646553.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:33.492Z,1516646553.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:33.889Z,1516646553.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:34.292Z,1516646554.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:34.689Z,1516646554.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:35.068Z,1516646555.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:35.466Z,1516646555.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:35.864Z,1516646555.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:36.268Z,1516646556.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:36.676Z,1516646556.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:37.076Z,1516646557.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:37.476Z,1516646557.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:37.876Z,1516646557.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:38.264Z,1516646558.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:38.670Z,1516646558.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:39.067Z,1516646559.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:39.472Z,1516646559.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:39.878Z,1516646559.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:40.277Z,1516646560.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:40.684Z,1516646560.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:41.076Z,1516646561.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:41.480Z,1516646561.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:41.869Z,1516646561.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:42.271Z,1516646562.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:42.687Z,1516646562.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:43.088Z,1516646563.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:43.478Z,1516646563.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:43.880Z,1516646563.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:44.255Z,1516646564.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:44.660Z,1516646564.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:45.056Z,1516646565.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:45.455Z,1516646565.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:45.883Z,1516646565.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:46.285Z,1516646566.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:46.666Z,1516646566.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:47.064Z,1516646567.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:47.464Z,1516646567.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:47.864Z,1516646567.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:48.264Z,1516646568.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:48.692Z,1516646568.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:49.084Z,1516646569.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:49.485Z,1516646569.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:49.865Z,1516646569.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:50.257Z,1516646570.257 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:42:50.257Z,1516646570.257 [BPC1] Communications Fault, FailCount= 7
2018-01-22T18:42:50.258Z,1516646570.258 [BPC1](ERROR): Communications Fault
2018-01-22T18:42:50.265Z,1516646570.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:50.306Z,1516646570.306 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:42:50.661Z,1516646570.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:51.069Z,1516646571.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:51.461Z,1516646571.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:51.475Z,1516646571.475 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:42:51.475Z,1516646571.475 [BPC1] No Fault, FailCount= 7
2018-01-22T18:42:51.925Z,1516646571.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:52.256Z,1516646572.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:52.271Z,1516646572.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:52.656Z,1516646572.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:52.676Z,1516646572.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:53.048Z,1516646573.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:53.068Z,1516646573.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:53.444Z,1516646573.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:53.476Z,1516646573.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:53.853Z,1516646573.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:53.869Z,1516646573.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:54.247Z,1516646574.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:54.271Z,1516646574.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:54.662Z,1516646574.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:54.684Z,1516646574.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:55.057Z,1516646575.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:55.073Z,1516646575.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:55.477Z,1516646575.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:55.597Z,1516646575.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:55.837Z,1516646575.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:55.868Z,1516646575.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:56.241Z,1516646576.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:56.265Z,1516646576.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:56.656Z,1516646576.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:56.676Z,1516646576.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:57.041Z,1516646577.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:57.076Z,1516646577.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:57.441Z,1516646577.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:57.472Z,1516646577.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:57.862Z,1516646577.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:57.877Z,1516646577.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:58.251Z,1516646578.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:58.285Z,1516646578.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:58.651Z,1516646578.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:58.680Z,1516646578.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:59.041Z,1516646579.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:59.075Z,1516646579.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:59.437Z,1516646579.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:59.478Z,1516646579.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:42:59.842Z,1516646579.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:42:59.873Z,1516646579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:00.241Z,1516646580.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:00.280Z,1516646580.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:00.651Z,1516646580.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:00.684Z,1516646580.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:01.055Z,1516646581.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:01.080Z,1516646581.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:01.455Z,1516646581.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:01.488Z,1516646581.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:01.841Z,1516646581.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:01.860Z,1516646581.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:02.241Z,1516646582.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:02.260Z,1516646582.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:02.646Z,1516646582.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:02.664Z,1516646582.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:03.042Z,1516646583.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:03.057Z,1516646583.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:03.441Z,1516646583.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:03.460Z,1516646583.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:03.855Z,1516646583.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:03.886Z,1516646583.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:04.259Z,1516646584.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:04.292Z,1516646584.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:04.655Z,1516646584.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:04.670Z,1516646584.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:05.052Z,1516646585.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:05.072Z,1516646585.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:05.447Z,1516646585.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:05.468Z,1516646585.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:05.846Z,1516646585.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:05.868Z,1516646585.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:06.246Z,1516646586.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:06.261Z,1516646586.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:06.654Z,1516646586.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:06.669Z,1516646586.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:07.067Z,1516646587.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:07.099Z,1516646587.099 [BPC1](INFO): Initialized
2018-01-22T18:43:07.108Z,1516646587.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:07.455Z,1516646587.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:07.470Z,1516646587.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:07.848Z,1516646587.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:07.868Z,1516646587.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:08.247Z,1516646588.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:08.261Z,1516646588.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:08.663Z,1516646588.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:08.678Z,1516646588.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:09.055Z,1516646589.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:09.070Z,1516646589.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:09.455Z,1516646589.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:09.470Z,1516646589.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:09.848Z,1516646589.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:09.864Z,1516646589.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:10.248Z,1516646590.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:10.268Z,1516646590.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:10.652Z,1516646590.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:10.672Z,1516646590.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:11.055Z,1516646591.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:11.070Z,1516646591.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:11.455Z,1516646591.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:11.476Z,1516646591.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:11.852Z,1516646591.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:11.867Z,1516646591.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:12.243Z,1516646592.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:12.271Z,1516646592.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:12.655Z,1516646592.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:12.670Z,1516646592.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:13.055Z,1516646593.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:13.070Z,1516646593.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:13.456Z,1516646593.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:13.471Z,1516646593.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:16.751Z,1516646596.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:16.766Z,1516646596.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:16.863Z,1516646596.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:16.904Z,1516646596.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:17.227Z,1516646597.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:43:17.258Z,1516646597.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:17.663Z,1516646597.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:18.038Z,1516646598.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:18.429Z,1516646598.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:18.888Z,1516646598.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:19.239Z,1516646599.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:19.642Z,1516646599.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:20.043Z,1516646600.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:20.439Z,1516646600.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:20.888Z,1516646600.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:21.239Z,1516646601.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:21.652Z,1516646601.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:22.045Z,1516646602.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:22.447Z,1516646602.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:22.844Z,1516646602.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:23.228Z,1516646603.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:23.657Z,1516646603.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:24.069Z,1516646604.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:24.453Z,1516646604.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:24.836Z,1516646604.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:25.235Z,1516646605.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:25.636Z,1516646605.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:26.041Z,1516646606.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:26.452Z,1516646606.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:26.851Z,1516646606.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:27.231Z,1516646607.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:27.636Z,1516646607.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:28.036Z,1516646608.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:28.423Z,1516646608.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:28.848Z,1516646608.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:29.252Z,1516646609.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:29.660Z,1516646609.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:30.027Z,1516646610.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:30.427Z,1516646610.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:30.859Z,1516646610.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:31.232Z,1516646611.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:31.632Z,1516646611.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:32.059Z,1516646612.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:32.457Z,1516646612.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:32.912Z,1516646612.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:33.232Z,1516646613.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:33.636Z,1516646613.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:34.028Z,1516646614.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:34.425Z,1516646614.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:34.905Z,1516646614.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:35.252Z,1516646615.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:35.656Z,1516646615.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:36.048Z,1516646616.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:36.428Z,1516646616.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:36.853Z,1516646616.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:37.225Z,1516646617.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:37.628Z,1516646617.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:38.056Z,1516646618.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:38.449Z,1516646618.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:38.849Z,1516646618.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:39.233Z,1516646619.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:39.642Z,1516646619.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:40.047Z,1516646620.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:40.430Z,1516646620.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:40.847Z,1516646620.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:41.252Z,1516646621.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:41.647Z,1516646621.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:42.037Z,1516646622.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:42.441Z,1516646622.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:42.840Z,1516646622.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:43.235Z,1516646623.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:43.642Z,1516646623.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:44.052Z,1516646624.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:44.448Z,1516646624.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:44.856Z,1516646624.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:45.244Z,1516646625.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:45.633Z,1516646625.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:46.043Z,1516646626.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:46.441Z,1516646626.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:46.845Z,1516646626.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:47.246Z,1516646627.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:47.649Z,1516646627.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:48.031Z,1516646628.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:48.441Z,1516646628.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:48.840Z,1516646628.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:49.228Z,1516646629.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:49.628Z,1516646629.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:50.054Z,1516646630.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:50.437Z,1516646630.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:50.861Z,1516646630.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:51.235Z,1516646631.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:51.627Z,1516646631.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:52.031Z,1516646632.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:52.436Z,1516646632.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:52.840Z,1516646632.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:53.238Z,1516646633.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:53.638Z,1516646633.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:54.031Z,1516646634.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:54.438Z,1516646634.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:54.836Z,1516646634.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:55.236Z,1516646635.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:55.638Z,1516646635.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:56.036Z,1516646636.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:56.438Z,1516646636.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:56.845Z,1516646636.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:57.235Z,1516646637.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:57.630Z,1516646637.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:58.032Z,1516646638.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:58.436Z,1516646638.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:58.840Z,1516646638.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:59.244Z,1516646639.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:43:59.638Z,1516646639.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:00.026Z,1516646640.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:00.438Z,1516646640.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:00.827Z,1516646640.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:01.232Z,1516646641.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:01.632Z,1516646641.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:02.044Z,1516646642.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:02.442Z,1516646642.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:02.845Z,1516646642.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:03.244Z,1516646643.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:03.624Z,1516646643.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:04.028Z,1516646644.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:04.428Z,1516646644.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:04.851Z,1516646644.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:05.257Z,1516646645.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:05.653Z,1516646645.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:06.024Z,1516646646.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:06.432Z,1516646646.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:06.837Z,1516646646.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:07.231Z,1516646647.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:07.631Z,1516646647.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:08.061Z,1516646648.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:08.438Z,1516646648.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:08.861Z,1516646648.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:09.236Z,1516646649.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:09.628Z,1516646649.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:10.054Z,1516646650.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:10.439Z,1516646650.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:10.841Z,1516646650.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:11.244Z,1516646651.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:11.651Z,1516646651.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:12.037Z,1516646652.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:12.437Z,1516646652.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:12.843Z,1516646652.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:13.229Z,1516646653.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:13.642Z,1516646653.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:16.854Z,1516646656.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:17.048Z,1516646657.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:17.325Z,1516646657.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:17.732Z,1516646657.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:18.119Z,1516646658.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:18.526Z,1516646658.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:18.932Z,1516646658.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:19.336Z,1516646659.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:19.736Z,1516646659.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:20.124Z,1516646660.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:20.518Z,1516646660.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:20.932Z,1516646660.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:21.332Z,1516646661.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:21.733Z,1516646661.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:22.132Z,1516646662.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:22.539Z,1516646662.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:22.929Z,1516646662.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:23.328Z,1516646663.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:23.712Z,1516646663.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:24.142Z,1516646664.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:24.536Z,1516646664.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:24.939Z,1516646664.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:25.315Z,1516646665.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:25.716Z,1516646665.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:26.144Z,1516646666.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:26.517Z,1516646666.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:26.948Z,1516646666.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:27.343Z,1516646667.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:27.744Z,1516646667.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:28.116Z,1516646668.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:28.515Z,1516646668.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:28.964Z,1516646668.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:29.318Z,1516646669.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:29.728Z,1516646669.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:30.136Z,1516646670.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:30.534Z,1516646670.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:30.998Z,1516646670.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:31.325Z,1516646671.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:31.712Z,1516646671.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:32.143Z,1516646672.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:32.509Z,1516646672.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:32.938Z,1516646672.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:33.344Z,1516646673.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:33.747Z,1516646673.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:34.121Z,1516646674.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:34.521Z,1516646674.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:34.914Z,1516646674.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:35.324Z,1516646675.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:35.722Z,1516646675.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:36.128Z,1516646676.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:36.532Z,1516646676.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:36.931Z,1516646676.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:37.319Z,1516646677.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:37.719Z,1516646677.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:38.124Z,1516646678.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:38.518Z,1516646678.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:38.933Z,1516646678.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:39.332Z,1516646679.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:39.732Z,1516646679.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:40.119Z,1516646680.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:40.527Z,1516646680.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:40.926Z,1516646680.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:41.323Z,1516646681.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:41.723Z,1516646681.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:42.128Z,1516646682.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:42.537Z,1516646682.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:42.933Z,1516646682.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:43.325Z,1516646683.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:43.725Z,1516646683.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:44.135Z,1516646684.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:44.516Z,1516646684.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:44.977Z,1516646684.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:45.344Z,1516646685.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:45.740Z,1516646685.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:46.136Z,1516646686.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:46.512Z,1516646686.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:46.911Z,1516646686.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:47.316Z,1516646687.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:47.712Z,1516646687.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:48.142Z,1516646688.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:48.545Z,1516646688.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:48.945Z,1516646688.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:49.320Z,1516646689.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:49.720Z,1516646689.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:50.119Z,1516646690.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:50.516Z,1516646690.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:50.944Z,1516646690.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:51.326Z,1516646691.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:51.725Z,1516646691.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:52.120Z,1516646692.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:52.520Z,1516646692.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:52.920Z,1516646692.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:53.319Z,1516646693.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:53.724Z,1516646693.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:54.128Z,1516646694.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:54.525Z,1516646694.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:54.949Z,1516646694.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:55.317Z,1516646695.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:55.718Z,1516646695.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:56.124Z,1516646696.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:56.522Z,1516646696.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:56.932Z,1516646696.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:57.340Z,1516646697.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:57.732Z,1516646697.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:57.732Z,1516646697.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-01-22T18:44:57.732Z,1516646697.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:44:57.734Z,1516646697.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:57.734Z,1516646697.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-01-22T18:44:57.734Z,1516646697.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:44:57.736Z,1516646697.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:57.736Z,1516646697.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-01-22T18:44:57.736Z,1516646697.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:44:57.748Z,1516646697.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:44:57.748Z,1516646697.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:44:57.748Z,1516646697.748 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:44:58.134Z,1516646698.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:44:58.134Z,1516646698.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-01-22T18:44:58.135Z,1516646698.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:44:58.135Z,1516646698.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-01-22T18:44:58.135Z,1516646698.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:44:58.135Z,1516646698.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-01-22T18:44:58.527Z,1516646698.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:44:58.527Z,1516646698.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:44:58.528Z,1516646698.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:44:58.528Z,1516646698.528 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:44:58.528Z,1516646698.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:44:58.529Z,1516646698.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:44:58.529Z,1516646698.529 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:44:58.529Z,1516646698.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:44:58.530Z,1516646698.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:44:58.925Z,1516646698.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:59.316Z,1516646699.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:44:59.712Z,1516646699.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:00.134Z,1516646700.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:00.545Z,1516646700.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:00.943Z,1516646700.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:01.320Z,1516646701.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:01.720Z,1516646701.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:02.117Z,1516646702.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:02.514Z,1516646702.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:02.922Z,1516646702.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:03.348Z,1516646703.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:03.726Z,1516646703.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:04.120Z,1516646704.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:04.520Z,1516646704.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:04.916Z,1516646704.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:05.320Z,1516646705.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:05.724Z,1516646705.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:06.126Z,1516646706.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:06.525Z,1516646706.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:06.946Z,1516646706.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:07.320Z,1516646707.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:07.727Z,1516646707.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:08.133Z,1516646708.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:08.520Z,1516646708.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:08.934Z,1516646708.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:09.340Z,1516646709.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:09.733Z,1516646709.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:10.122Z,1516646710.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:10.527Z,1516646710.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:10.930Z,1516646710.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:11.331Z,1516646711.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:11.733Z,1516646711.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:12.136Z,1516646712.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:12.540Z,1516646712.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:12.936Z,1516646712.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:13.312Z,1516646713.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:13.715Z,1516646713.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:17.049Z,1516646717.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:17.192Z,1516646717.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:17.534Z,1516646717.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:17.947Z,1516646717.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:18.341Z,1516646718.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:18.755Z,1516646718.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:19.128Z,1516646719.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:19.528Z,1516646719.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:19.928Z,1516646719.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:20.327Z,1516646720.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:20.776Z,1516646720.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:21.125Z,1516646721.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:21.532Z,1516646721.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:21.920Z,1516646721.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:22.323Z,1516646722.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:22.784Z,1516646722.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:23.134Z,1516646723.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:23.532Z,1516646723.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:23.943Z,1516646723.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:24.332Z,1516646724.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:24.712Z,1516646724.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:25.142Z,1516646725.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:25.515Z,1516646725.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:25.930Z,1516646725.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:26.264Z,1516646726.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:45:26.333Z,1516646726.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:26.737Z,1516646726.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:27.061Z,1516646727.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:45:27.129Z,1516646727.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:27.479Z,1516646727.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:45:27.527Z,1516646727.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:27.921Z,1516646727.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:28.325Z,1516646728.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:28.763Z,1516646728.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:29.142Z,1516646729.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:29.533Z,1516646729.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:29.936Z,1516646729.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:30.328Z,1516646730.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:30.823Z,1516646730.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:31.116Z,1516646731.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:31.517Z,1516646731.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:31.923Z,1516646731.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:32.324Z,1516646732.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:32.772Z,1516646732.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:33.131Z,1516646733.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:33.508Z,1516646733.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:33.908Z,1516646733.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:34.332Z,1516646734.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:34.790Z,1516646734.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:35.142Z,1516646735.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:35.541Z,1516646735.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:35.948Z,1516646735.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:36.315Z,1516646736.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:36.720Z,1516646736.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:37.136Z,1516646737.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:37.526Z,1516646737.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:37.931Z,1516646737.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:38.335Z,1516646738.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:38.731Z,1516646738.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:39.134Z,1516646739.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:39.524Z,1516646739.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:39.924Z,1516646739.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:40.325Z,1516646740.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:40.728Z,1516646740.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:41.138Z,1516646741.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:41.532Z,1516646741.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:41.933Z,1516646741.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:42.326Z,1516646742.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:42.771Z,1516646742.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:43.131Z,1516646743.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:43.156Z,1516646743.156 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T18:45:43.508Z,1516646743.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:43.931Z,1516646743.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:44.344Z,1516646744.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:44.779Z,1516646744.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:45.122Z,1516646745.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:45.516Z,1516646745.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:45.916Z,1516646745.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:46.321Z,1516646746.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:46.779Z,1516646746.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:47.126Z,1516646747.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:47.528Z,1516646747.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:47.928Z,1516646747.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:48.315Z,1516646748.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:48.766Z,1516646748.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:49.128Z,1516646749.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:49.516Z,1516646749.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:49.930Z,1516646749.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:50.342Z,1516646750.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:50.730Z,1516646750.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:51.110Z,1516646751.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:51.512Z,1516646751.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:51.937Z,1516646751.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:52.335Z,1516646752.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:52.738Z,1516646752.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:53.156Z,1516646753.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:53.519Z,1516646753.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:53.942Z,1516646753.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:54.344Z,1516646754.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:54.726Z,1516646754.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:55.151Z,1516646755.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:55.524Z,1516646755.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:55.936Z,1516646755.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:56.336Z,1516646756.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:56.783Z,1516646756.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:57.123Z,1516646757.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:57.520Z,1516646757.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:57.932Z,1516646757.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:58.331Z,1516646758.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:58.804Z,1516646758.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:59.108Z,1516646759.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:59.516Z,1516646759.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:45:59.922Z,1516646759.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:00.326Z,1516646760.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:00.800Z,1516646760.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:01.119Z,1516646761.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:01.520Z,1516646761.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:01.930Z,1516646761.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:02.329Z,1516646762.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:02.799Z,1516646762.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:03.133Z,1516646763.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:03.532Z,1516646763.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:03.931Z,1516646763.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:04.340Z,1516646764.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:04.744Z,1516646764.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:05.140Z,1516646765.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:05.515Z,1516646765.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:05.937Z,1516646765.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:06.337Z,1516646766.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:06.741Z,1516646766.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:07.171Z,1516646767.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:07.514Z,1516646767.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:07.928Z,1516646767.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:08.322Z,1516646768.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:08.722Z,1516646768.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:09.168Z,1516646769.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:09.530Z,1516646769.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:09.928Z,1516646769.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:10.328Z,1516646770.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:10.757Z,1516646770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:11.109Z,1516646771.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:11.512Z,1516646771.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:11.943Z,1516646771.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:12.322Z,1516646772.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:12.788Z,1516646772.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:13.132Z,1516646773.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:13.521Z,1516646773.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:13.930Z,1516646773.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:17.278Z,1516646777.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:17.409Z,1516646777.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:17.741Z,1516646777.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:18.149Z,1516646778.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:18.540Z,1516646778.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:18.973Z,1516646778.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:19.376Z,1516646779.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:19.771Z,1516646779.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:20.142Z,1516646780.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:20.544Z,1516646780.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:20.956Z,1516646780.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:21.364Z,1516646781.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:21.753Z,1516646781.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:22.148Z,1516646782.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:22.546Z,1516646782.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:22.957Z,1516646782.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:23.364Z,1516646783.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:23.756Z,1516646783.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:24.152Z,1516646784.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:24.557Z,1516646784.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:24.953Z,1516646784.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:25.364Z,1516646785.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:25.761Z,1516646785.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:26.159Z,1516646786.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:26.555Z,1516646786.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:26.960Z,1516646786.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:27.368Z,1516646787.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:27.763Z,1516646787.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:28.158Z,1516646788.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:28.554Z,1516646788.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:28.959Z,1516646788.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:29.364Z,1516646789.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:29.764Z,1516646789.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:30.148Z,1516646790.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:30.559Z,1516646790.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:30.971Z,1516646790.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:31.359Z,1516646791.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:31.765Z,1516646791.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:32.140Z,1516646792.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:32.567Z,1516646792.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:32.967Z,1516646792.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:33.367Z,1516646793.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:33.767Z,1516646793.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:34.168Z,1516646794.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:34.544Z,1516646794.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:34.964Z,1516646794.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:35.350Z,1516646795.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:35.756Z,1516646795.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:36.156Z,1516646796.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:36.371Z,1516646796.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:36.552Z,1516646796.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:36.961Z,1516646796.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:37.169Z,1516646797.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:37.361Z,1516646797.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:37.581Z,1516646797.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:37.758Z,1516646797.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:38.158Z,1516646798.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:38.375Z,1516646798.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:38.554Z,1516646798.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:38.955Z,1516646798.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:39.171Z,1516646799.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:39.362Z,1516646799.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:39.575Z,1516646799.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:39.765Z,1516646799.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:40.152Z,1516646800.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:40.553Z,1516646800.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:40.953Z,1516646800.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x33887 got:0x19133
2018-01-22T18:46:40.980Z,1516646800.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:41.356Z,1516646801.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:41.760Z,1516646801.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:42.158Z,1516646802.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:42.534Z,1516646802.534 [PNI_TCM](ERROR): CRC does not match. Expected:0x64723 got:0x20742
2018-01-22T18:46:42.557Z,1516646802.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:42.955Z,1516646802.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:43.362Z,1516646803.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:43.771Z,1516646803.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:44.150Z,1516646804.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:44.555Z,1516646804.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:44.967Z,1516646804.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:45.364Z,1516646805.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:45.765Z,1516646805.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:46.157Z,1516646806.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:46.553Z,1516646806.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:46.952Z,1516646806.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:47.354Z,1516646807.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:47.772Z,1516646807.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:48.150Z,1516646808.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:48.565Z,1516646808.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:48.955Z,1516646808.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:49.356Z,1516646809.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:49.753Z,1516646809.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:50.176Z,1516646810.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:50.395Z,1516646810.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:50.548Z,1516646810.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x42363 got:0x49152
2018-01-22T18:46:50.584Z,1516646810.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:50.964Z,1516646810.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:51.193Z,1516646811.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:51.348Z,1516646811.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:51.603Z,1516646811.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:51.760Z,1516646811.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:52.150Z,1516646812.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:52.399Z,1516646812.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:52.560Z,1516646812.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:52.950Z,1516646812.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:53.195Z,1516646813.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:53.369Z,1516646813.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:53.599Z,1516646813.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:46:53.763Z,1516646813.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:54.176Z,1516646814.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:54.557Z,1516646814.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:54.960Z,1516646814.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:55.349Z,1516646815.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:55.763Z,1516646815.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:56.168Z,1516646816.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:56.569Z,1516646816.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:56.972Z,1516646816.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:57.361Z,1516646817.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:57.756Z,1516646817.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:58.164Z,1516646818.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:58.541Z,1516646818.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:58.951Z,1516646818.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:59.353Z,1516646819.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:46:59.769Z,1516646819.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:00.158Z,1516646820.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:00.549Z,1516646820.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:00.983Z,1516646820.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:01.381Z,1516646821.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:01.744Z,1516646821.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:02.157Z,1516646822.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:02.556Z,1516646822.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:02.980Z,1516646822.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:03.349Z,1516646823.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:03.752Z,1516646823.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:04.152Z,1516646824.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:04.411Z,1516646824.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:04.569Z,1516646824.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:04.952Z,1516646824.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:05.209Z,1516646825.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:05.359Z,1516646825.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:05.625Z,1516646825.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:05.772Z,1516646825.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:06.187Z,1516646826.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:06.419Z,1516646826.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:06.545Z,1516646826.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:06.957Z,1516646826.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:07.215Z,1516646827.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:07.364Z,1516646827.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:07.619Z,1516646827.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:47:07.752Z,1516646827.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:08.159Z,1516646828.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:08.565Z,1516646828.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:08.965Z,1516646828.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:09.360Z,1516646829.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:09.752Z,1516646829.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:10.160Z,1516646830.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:10.563Z,1516646830.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:10.956Z,1516646830.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:11.358Z,1516646831.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:11.771Z,1516646831.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:12.176Z,1516646832.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:12.560Z,1516646832.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:12.960Z,1516646832.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:13.348Z,1516646833.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:13.352Z,1516646833.352 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T18:42:13.3Z
2018-01-22T18:47:13.352Z,1516646833.352 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T18:47:13.352Z,1516646833.352 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T18:47:13.752Z,1516646833.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:14.284Z,1516646834.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:17.537Z,1516646837.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:17.599Z,1516646837.599 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0012.lzma
2018-01-22T18:47:17.664Z,1516646837.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:18.005Z,1516646838.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:18.365Z,1516646838.365 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0012.lzma.bak
2018-01-22T18:47:18.365Z,1516646838.365 [DataOverHttps](INFO): SBD MOMSN=7750872
2018-01-22T18:47:18.414Z,1516646838.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:19.083Z,1516646839.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:19.312Z,1516646839.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:22.470Z,1516646842.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:22.605Z,1516646842.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:22.990Z,1516646842.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:23.379Z,1516646843.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:23.771Z,1516646843.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:24.170Z,1516646844.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:27.528Z,1516646847.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:27.611Z,1516646847.611 [DataOverHttps](INFO): Sending 127 bytes from file Logs/20180122T180533/Express0013.lzma
2018-01-22T18:47:27.694Z,1516646847.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:28.024Z,1516646848.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:28.392Z,1516646848.392 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0013.lzma.bak
2018-01-22T18:47:28.393Z,1516646848.393 [DataOverHttps](INFO): SBD MOMSN=7750874
2018-01-22T18:47:28.429Z,1516646848.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:29.122Z,1516646849.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:29.125Z,1516646849.125 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T18:47:29.125Z,1516646849.125 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T18:47:29.125Z,1516646849.125 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T18:47:29.278Z,1516646849.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:33.478Z,1516646853.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:33.636Z,1516646853.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:33.997Z,1516646853.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:34.434Z,1516646854.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:34.842Z,1516646854.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:35.206Z,1516646855.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:35.628Z,1516646855.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:36.012Z,1516646856.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:36.404Z,1516646856.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:36.804Z,1516646856.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:37.188Z,1516646857.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:37.627Z,1516646857.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:38.003Z,1516646858.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:38.408Z,1516646858.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:38.807Z,1516646858.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:39.221Z,1516646859.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:39.616Z,1516646859.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:40.021Z,1516646860.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:40.396Z,1516646860.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:40.797Z,1516646860.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:41.218Z,1516646861.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:41.609Z,1516646861.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:42.014Z,1516646862.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:42.404Z,1516646862.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:42.795Z,1516646862.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:43.192Z,1516646863.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:43.594Z,1516646863.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:43.984Z,1516646863.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:44.400Z,1516646864.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:44.800Z,1516646864.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:45.207Z,1516646865.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:45.599Z,1516646865.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:45.980Z,1516646865.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:46.380Z,1516646866.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:46.784Z,1516646866.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:47.205Z,1516646867.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:47.611Z,1516646867.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:47.994Z,1516646867.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:48.381Z,1516646868.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:48.784Z,1516646868.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:49.192Z,1516646869.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:49.583Z,1516646869.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:49.992Z,1516646869.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:50.396Z,1516646870.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:50.796Z,1516646870.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:51.192Z,1516646871.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:51.592Z,1516646871.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:51.982Z,1516646871.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:52.384Z,1516646872.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:52.796Z,1516646872.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:53.193Z,1516646873.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:53.621Z,1516646873.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:54.003Z,1516646874.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:54.384Z,1516646874.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:54.780Z,1516646874.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:55.183Z,1516646875.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:55.580Z,1516646875.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:55.980Z,1516646875.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:56.473Z,1516646876.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:56.833Z,1516646876.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:57.205Z,1516646877.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:57.592Z,1516646877.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.009Z,1516646878.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.404Z,1516646878.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.784Z,1516646878.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.784Z,1516646878.784 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-01-22T18:47:58.784Z,1516646878.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:47:58.786Z,1516646878.786 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.786Z,1516646878.786 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-01-22T18:47:58.786Z,1516646878.786 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:47:58.788Z,1516646878.788 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:47:58.788Z,1516646878.788 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-01-22T18:47:58.788Z,1516646878.788 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:47:58.829Z,1516646878.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:47:58.829Z,1516646878.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:47:58.829Z,1516646878.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:47:59.208Z,1516646879.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:47:59.208Z,1516646879.208 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-01-22T18:47:59.209Z,1516646879.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:47:59.209Z,1516646879.209 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-01-22T18:47:59.209Z,1516646879.209 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:47:59.209Z,1516646879.209 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-01-22T18:47:59.600Z,1516646879.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:47:59.601Z,1516646879.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:47:59.601Z,1516646879.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:47:59.602Z,1516646879.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:47:59.602Z,1516646879.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:47:59.602Z,1516646879.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:47:59.603Z,1516646879.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:47:59.603Z,1516646879.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:47:59.604Z,1516646879.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:47:59.994Z,1516646879.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:00.393Z,1516646880.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:00.788Z,1516646880.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:01.175Z,1516646881.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:01.580Z,1516646881.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:01.980Z,1516646881.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:02.402Z,1516646882.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:02.809Z,1516646882.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:03.216Z,1516646883.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:03.580Z,1516646883.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:03.979Z,1516646883.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:04.380Z,1516646884.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:04.780Z,1516646884.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:05.186Z,1516646885.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:05.596Z,1516646885.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:05.990Z,1516646885.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:06.392Z,1516646886.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:06.784Z,1516646886.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:07.183Z,1516646887.183 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:48:07.183Z,1516646887.183 [BPC1] Communications Fault, FailCount= 8
2018-01-22T18:48:07.183Z,1516646887.183 [BPC1](ERROR): Communications Fault
2018-01-22T18:48:07.190Z,1516646887.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:07.232Z,1516646887.232 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:48:07.588Z,1516646887.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:07.988Z,1516646887.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:08.393Z,1516646888.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:08.423Z,1516646888.423 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:48:08.423Z,1516646888.423 [BPC1] No Fault, FailCount= 8
2018-01-22T18:48:08.844Z,1516646888.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:09.200Z,1516646889.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:09.584Z,1516646889.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:09.984Z,1516646889.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:10.385Z,1516646890.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:10.792Z,1516646890.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:11.197Z,1516646891.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:11.604Z,1516646891.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:11.998Z,1516646891.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:12.391Z,1516646892.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:12.791Z,1516646892.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:13.196Z,1516646893.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:13.600Z,1516646893.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:13.996Z,1516646893.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:14.404Z,1516646894.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:14.797Z,1516646894.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:15.200Z,1516646895.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:15.589Z,1516646895.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:15.989Z,1516646895.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:16.395Z,1516646896.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:16.790Z,1516646896.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:17.208Z,1516646897.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:17.608Z,1516646897.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:18.004Z,1516646898.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:18.396Z,1516646898.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:18.780Z,1516646898.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:19.180Z,1516646899.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:19.584Z,1516646899.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:19.979Z,1516646899.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:20.390Z,1516646900.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:20.809Z,1516646900.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:21.206Z,1516646901.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:21.579Z,1516646901.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:21.979Z,1516646901.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:22.380Z,1516646902.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:22.779Z,1516646902.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:23.209Z,1516646903.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:23.610Z,1516646903.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:24.007Z,1516646904.007 [BPC1](INFO): Initialized
2018-01-22T18:48:24.022Z,1516646904.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:24.382Z,1516646904.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:24.783Z,1516646904.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:25.188Z,1516646905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:25.591Z,1516646905.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:25.987Z,1516646905.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:26.395Z,1516646906.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:26.790Z,1516646906.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:27.189Z,1516646907.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:27.582Z,1516646907.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:27.991Z,1516646907.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:28.380Z,1516646908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:28.789Z,1516646908.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:29.190Z,1516646909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:29.591Z,1516646909.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:32.925Z,1516646912.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:33.100Z,1516646913.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:33.412Z,1516646913.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:33.800Z,1516646913.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:34.152Z,1516646914.152 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T18:48:34.153Z,1516646914.153 [NAL9602] Data Fault, FailCount= 4
2018-01-22T18:48:34.153Z,1516646914.153 [NAL9602](ERROR): Data Fault
2018-01-22T18:48:34.212Z,1516646914.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:34.225Z,1516646914.225 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T18:48:34.552Z,1516646914.552 [NAL9602](INFO): Powering down
2018-01-22T18:48:34.601Z,1516646914.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:35.070Z,1516646915.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:35.396Z,1516646915.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:35.417Z,1516646915.417 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T18:48:35.417Z,1516646915.417 [NAL9602] No Fault, FailCount= 4
2018-01-22T18:48:35.799Z,1516646915.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:36.189Z,1516646916.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:36.586Z,1516646916.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:37.060Z,1516646917.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:37.412Z,1516646917.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:37.790Z,1516646917.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:38.197Z,1516646918.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:38.595Z,1516646918.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:38.989Z,1516646918.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:39.412Z,1516646919.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:39.790Z,1516646919.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:40.190Z,1516646920.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:40.593Z,1516646920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:40.997Z,1516646920.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:41.443Z,1516646921.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:41.792Z,1516646921.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:42.196Z,1516646922.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:42.592Z,1516646922.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:42.991Z,1516646922.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:43.416Z,1516646923.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:43.797Z,1516646923.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:44.199Z,1516646924.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:44.602Z,1516646924.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:45.057Z,1516646925.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:45.388Z,1516646925.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:45.785Z,1516646925.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:46.183Z,1516646926.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:46.592Z,1516646926.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:47.065Z,1516646927.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:47.386Z,1516646927.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:47.792Z,1516646927.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:48.186Z,1516646928.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:48.587Z,1516646928.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:49.061Z,1516646929.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:49.391Z,1516646929.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:49.787Z,1516646929.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:50.196Z,1516646930.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:50.592Z,1516646930.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:51.046Z,1516646931.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:51.391Z,1516646931.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:51.786Z,1516646931.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:52.190Z,1516646932.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:52.590Z,1516646932.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:52.996Z,1516646932.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:53.389Z,1516646933.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:53.801Z,1516646933.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:54.196Z,1516646934.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:54.592Z,1516646934.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:54.991Z,1516646934.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:55.441Z,1516646935.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:55.795Z,1516646935.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:56.195Z,1516646936.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:56.610Z,1516646936.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:56.983Z,1516646936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:57.428Z,1516646937.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:57.789Z,1516646937.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:58.189Z,1516646938.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:58.608Z,1516646938.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:58.988Z,1516646938.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:59.386Z,1516646939.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:48:59.796Z,1516646939.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:00.192Z,1516646940.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:00.587Z,1516646940.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:01.039Z,1516646941.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:01.397Z,1516646941.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:01.791Z,1516646941.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:02.200Z,1516646942.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:02.597Z,1516646942.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:02.989Z,1516646942.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:03.401Z,1516646943.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:03.797Z,1516646943.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:04.195Z,1516646944.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:04.600Z,1516646944.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:04.952Z,1516646944.952 [NAL9602](INFO): Powering up NAL9602
2018-01-22T18:49:04.995Z,1516646944.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:05.387Z,1516646945.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:05.800Z,1516646945.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:06.208Z,1516646946.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:06.583Z,1516646946.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:07.007Z,1516646947.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:07.396Z,1516646947.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:07.790Z,1516646947.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:08.190Z,1516646948.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:08.596Z,1516646948.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:08.991Z,1516646948.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:09.445Z,1516646949.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:09.802Z,1516646949.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:10.187Z,1516646950.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:10.596Z,1516646950.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:10.997Z,1516646950.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:11.466Z,1516646951.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:11.786Z,1516646951.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:12.187Z,1516646952.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:12.586Z,1516646952.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:12.992Z,1516646952.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:13.397Z,1516646953.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:13.791Z,1516646953.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:14.196Z,1516646954.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:14.594Z,1516646954.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:14.988Z,1516646954.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:15.408Z,1516646955.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:15.806Z,1516646955.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:16.152Z,1516646956.152 [NAL9602](INFO): NAL9602 initialized
2018-01-22T18:49:16.200Z,1516646956.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:16.608Z,1516646956.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:17.013Z,1516646957.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:17.402Z,1516646957.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:17.812Z,1516646957.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:18.200Z,1516646958.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:18.592Z,1516646958.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:19.000Z,1516646959.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:19.386Z,1516646959.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:19.794Z,1516646959.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:20.197Z,1516646960.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:20.597Z,1516646960.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:20.990Z,1516646960.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:21.400Z,1516646961.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:21.800Z,1516646961.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:22.190Z,1516646962.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:22.602Z,1516646962.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:23.004Z,1516646963.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:23.467Z,1516646963.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:23.798Z,1516646963.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:24.204Z,1516646964.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:24.590Z,1516646964.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:24.000Z,1516646965.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:25.448Z,1516646965.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:25.808Z,1516646965.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:26.212Z,1516646966.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:26.616Z,1516646966.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:26.983Z,1516646966.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:27.391Z,1516646967.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:27.796Z,1516646967.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:28.187Z,1516646968.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:28.605Z,1516646968.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:29.016Z,1516646969.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:29.404Z,1516646969.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:29.800Z,1516646969.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:33.009Z,1516646973.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:33.170Z,1516646973.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:33.500Z,1516646973.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:33.894Z,1516646973.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:34.285Z,1516646974.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:34.677Z,1516646974.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:35.083Z,1516646975.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:35.492Z,1516646975.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:35.892Z,1516646975.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:36.293Z,1516646976.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:36.685Z,1516646976.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:37.092Z,1516646977.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:37.509Z,1516646977.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:37.898Z,1516646977.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:38.290Z,1516646978.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:38.685Z,1516646978.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:39.072Z,1516646979.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:39.510Z,1516646979.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:39.897Z,1516646979.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:40.292Z,1516646980.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:40.684Z,1516646980.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:41.146Z,1516646981.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:41.492Z,1516646981.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:41.890Z,1516646981.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:42.290Z,1516646982.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:42.685Z,1516646982.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:43.144Z,1516646983.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:43.512Z,1516646983.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:43.892Z,1516646983.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:44.297Z,1516646984.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:44.674Z,1516646984.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:45.144Z,1516646985.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:45.488Z,1516646985.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:45.888Z,1516646985.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:46.282Z,1516646986.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:46.677Z,1516646986.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:47.147Z,1516646987.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:47.500Z,1516646987.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:47.889Z,1516646987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:48.298Z,1516646988.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:48.681Z,1516646988.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:49.068Z,1516646989.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:49.504Z,1516646989.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:49.882Z,1516646989.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:50.282Z,1516646990.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:50.680Z,1516646990.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:51.075Z,1516646991.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:51.548Z,1516646991.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:51.891Z,1516646991.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:52.296Z,1516646992.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:52.684Z,1516646992.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:53.084Z,1516646993.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:53.518Z,1516646993.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:53.893Z,1516646993.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:54.288Z,1516646994.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:54.685Z,1516646994.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:55.139Z,1516646995.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:55.476Z,1516646995.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:55.901Z,1516646995.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:56.301Z,1516646996.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:56.671Z,1516646996.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:57.069Z,1516646997.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:57.488Z,1516646997.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:57.892Z,1516646997.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:58.296Z,1516646998.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:58.676Z,1516646998.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:59.117Z,1516646999.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:59.482Z,1516646999.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:49:59.885Z,1516646999.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:00.287Z,1516647000.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:00.680Z,1516647000.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:01.074Z,1516647001.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:01.486Z,1516647001.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:01.888Z,1516647001.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:02.289Z,1516647002.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:02.687Z,1516647002.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:03.081Z,1516647003.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:03.497Z,1516647003.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:03.904Z,1516647003.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:04.282Z,1516647004.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:04.671Z,1516647004.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:05.069Z,1516647005.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:05.560Z,1516647005.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:05.885Z,1516647005.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:06.282Z,1516647006.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:06.675Z,1516647006.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:07.073Z,1516647007.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:07.553Z,1516647007.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:07.882Z,1516647007.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:08.281Z,1516647008.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:08.675Z,1516647008.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:09.082Z,1516647009.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:09.474Z,1516647009.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:09.896Z,1516647009.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:10.286Z,1516647010.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:10.684Z,1516647010.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:11.080Z,1516647011.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:11.474Z,1516647011.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:11.875Z,1516647011.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:12.280Z,1516647012.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:12.682Z,1516647012.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:13.081Z,1516647013.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:13.495Z,1516647013.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:13.876Z,1516647013.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:14.275Z,1516647014.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:14.680Z,1516647014.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:15.076Z,1516647015.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:15.481Z,1516647015.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:15.889Z,1516647015.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:16.289Z,1516647016.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:16.689Z,1516647016.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:17.083Z,1516647017.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:17.482Z,1516647017.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:17.881Z,1516647017.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:18.284Z,1516647018.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:18.690Z,1516647018.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:19.093Z,1516647019.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:19.564Z,1516647019.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:19.869Z,1516647019.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:20.272Z,1516647020.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:20.668Z,1516647020.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:21.073Z,1516647021.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:21.530Z,1516647021.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:21.883Z,1516647021.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:22.282Z,1516647022.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:22.688Z,1516647022.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:23.075Z,1516647023.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:23.485Z,1516647023.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:23.886Z,1516647023.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:24.289Z,1516647024.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:24.692Z,1516647024.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:25.089Z,1516647025.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:25.505Z,1516647025.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:25.884Z,1516647025.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:26.267Z,1516647026.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:26.671Z,1516647026.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:27.080Z,1516647027.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:27.480Z,1516647027.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:27.886Z,1516647027.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:28.281Z,1516647028.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:28.682Z,1516647028.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:29.076Z,1516647029.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:29.484Z,1516647029.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:29.892Z,1516647029.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:33.131Z,1516647033.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:33.292Z,1516647033.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:33.628Z,1516647033.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:34.008Z,1516647034.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:34.403Z,1516647034.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:34.799Z,1516647034.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:35.212Z,1516647035.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:35.620Z,1516647035.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:36.010Z,1516647036.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:36.418Z,1516647036.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:36.798Z,1516647036.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:37.236Z,1516647037.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:37.597Z,1516647037.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:38.000Z,1516647038.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:38.392Z,1516647038.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:38.819Z,1516647038.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:39.264Z,1516647039.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:39.627Z,1516647039.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:39.989Z,1516647039.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:40.388Z,1516647040.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:40.801Z,1516647040.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:41.241Z,1516647041.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:41.624Z,1516647041.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:42.010Z,1516647042.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:42.423Z,1516647042.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:42.804Z,1516647042.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:43.262Z,1516647043.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:43.608Z,1516647043.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:44.010Z,1516647044.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:44.404Z,1516647044.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:44.816Z,1516647044.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:45.272Z,1516647045.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:45.619Z,1516647045.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:46.008Z,1516647046.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:46.394Z,1516647046.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:46.804Z,1516647046.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:47.203Z,1516647047.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:47.617Z,1516647047.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:48.009Z,1516647048.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:48.356Z,1516647048.356 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-01-22T18:50:48.356Z,1516647048.356 [DropWeight] Hardware Fault, FailCount= 1
2018-01-22T18:50:48.356Z,1516647048.356 [DropWeight](ERROR): Hardware Fault
2018-01-22T18:50:48.426Z,1516647048.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:48.445Z,1516647048.445 [CommandLine](FAULT): Scheduling is paused
2018-01-22T18:50:48.445Z,1516647048.445 [CBIT](INFO): Critical error at 20180122T185048
2018-01-22T18:50:48.452Z,1516647048.452 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-01-22T18:50:48.452Z,1516647048.452 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-01-22T18:50:48.804Z,1516647048.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:48.815Z,1516647048.815 [CBIT](INFO): Critical error at 20180122T185048
2018-01-22T18:50:49.195Z,1516647049.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:49.621Z,1516647049.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:49.999Z,1516647049.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:50.401Z,1516647050.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:50.806Z,1516647050.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:51.260Z,1516647051.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:51.602Z,1516647051.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:51.999Z,1516647051.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:52.404Z,1516647052.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:52.802Z,1516647052.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:53.262Z,1516647053.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:53.610Z,1516647053.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:54.014Z,1516647054.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:54.402Z,1516647054.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:54.792Z,1516647054.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:55.272Z,1516647055.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:55.632Z,1516647055.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:56.003Z,1516647056.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:56.400Z,1516647056.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:56.804Z,1516647056.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:57.257Z,1516647057.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:57.606Z,1516647057.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:58.020Z,1516647058.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:58.405Z,1516647058.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:58.803Z,1516647058.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:59.203Z,1516647059.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:59.624Z,1516647059.624 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:59.624Z,1516647059.624 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-01-22T18:50:59.624Z,1516647059.624 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:50:59.626Z,1516647059.626 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:59.626Z,1516647059.626 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-01-22T18:50:59.626Z,1516647059.626 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:50:59.632Z,1516647059.632 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:50:59.632Z,1516647059.632 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-01-22T18:50:59.632Z,1516647059.632 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:50:59.661Z,1516647059.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:50:59.662Z,1516647059.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:50:59.662Z,1516647059.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:51:00.030Z,1516647060.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:51:00.030Z,1516647060.030 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-01-22T18:51:00.031Z,1516647060.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:51:00.031Z,1516647060.031 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-01-22T18:51:00.031Z,1516647060.031 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:51:00.031Z,1516647060.031 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-01-22T18:51:00.397Z,1516647060.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:51:00.398Z,1516647060.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:51:00.398Z,1516647060.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:51:00.399Z,1516647060.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:51:00.399Z,1516647060.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:51:00.399Z,1516647060.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:51:00.400Z,1516647060.400 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:51:00.400Z,1516647060.400 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:51:00.400Z,1516647060.400 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:51:00.796Z,1516647060.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:01.196Z,1516647061.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:01.650Z,1516647061.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:02.003Z,1516647062.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:02.404Z,1516647062.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:02.796Z,1516647062.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:03.202Z,1516647063.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:03.639Z,1516647063.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:04.002Z,1516647064.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:04.404Z,1516647064.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:04.794Z,1516647064.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:05.272Z,1516647065.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:05.604Z,1516647065.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:06.008Z,1516647066.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:06.408Z,1516647066.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:06.796Z,1516647066.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:07.262Z,1516647067.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:07.605Z,1516647067.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:08.014Z,1516647068.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:08.405Z,1516647068.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:08.807Z,1516647068.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:09.257Z,1516647069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:09.606Z,1516647069.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:10.021Z,1516647070.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:10.406Z,1516647070.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:10.805Z,1516647070.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:11.255Z,1516647071.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:11.606Z,1516647071.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:12.028Z,1516647072.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:12.416Z,1516647072.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:12.809Z,1516647072.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:13.208Z,1516647073.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:13.619Z,1516647073.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:14.013Z,1516647074.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:14.398Z,1516647074.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:14.792Z,1516647074.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:15.201Z,1516647075.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:15.644Z,1516647075.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:16.002Z,1516647076.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:16.404Z,1516647076.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:16.797Z,1516647076.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:17.208Z,1516647077.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:17.676Z,1516647077.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:18.018Z,1516647078.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:18.416Z,1516647078.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:18.789Z,1516647078.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:19.191Z,1516647079.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:19.606Z,1516647079.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:20.003Z,1516647080.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:20.404Z,1516647080.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:20.800Z,1516647080.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:21.195Z,1516647081.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:21.605Z,1516647081.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:22.019Z,1516647082.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:22.404Z,1516647082.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:22.804Z,1516647082.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:23.198Z,1516647083.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:23.605Z,1516647083.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:24.009Z,1516647084.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:24.408Z,1516647084.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:24.796Z,1516647084.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:25.194Z,1516647085.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:25.613Z,1516647085.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:26.009Z,1516647086.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:26.406Z,1516647086.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:26.803Z,1516647086.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:27.201Z,1516647087.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:27.602Z,1516647087.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:28.009Z,1516647088.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:28.409Z,1516647088.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:28.806Z,1516647088.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:29.203Z,1516647089.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:29.652Z,1516647089.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:30.011Z,1516647090.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:33.327Z,1516647093.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:33.450Z,1516647093.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:33.824Z,1516647093.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:34.220Z,1516647094.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:34.605Z,1516647094.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:35.001Z,1516647095.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:35.402Z,1516647095.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:35.810Z,1516647095.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:36.212Z,1516647096.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:36.607Z,1516647096.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:37.009Z,1516647097.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:37.391Z,1516647097.391 [PNI_TCM](ERROR): CRC does not match. Expected:0x54029 got:0x20647
2018-01-22T18:51:37.412Z,1516647097.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:37.797Z,1516647097.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:38.200Z,1516647098.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:38.616Z,1516647098.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:39.003Z,1516647099.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x25832 got:0x888
2018-01-22T18:51:39.026Z,1516647099.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:39.409Z,1516647099.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:39.804Z,1516647099.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:40.212Z,1516647100.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:40.592Z,1516647100.592 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-22T18:51:40.635Z,1516647100.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:41.001Z,1516647101.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:41.401Z,1516647101.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:41.829Z,1516647101.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:42.198Z,1516647102.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x14161 got:0x7489
2018-01-22T18:51:42.236Z,1516647102.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:42.617Z,1516647102.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:42.998Z,1516647102.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:43.408Z,1516647103.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:43.802Z,1516647103.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:44.202Z,1516647104.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:44.607Z,1516647104.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:45.033Z,1516647105.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:45.402Z,1516647105.402 [PNI_TCM](ERROR): CRC does not match. Expected:0x22695 got:0x13507
2018-01-22T18:51:45.430Z,1516647105.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:45.816Z,1516647105.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:46.210Z,1516647106.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:46.614Z,1516647106.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:47.003Z,1516647107.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:47.411Z,1516647107.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:47.808Z,1516647107.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:48.224Z,1516647108.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:48.612Z,1516647108.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:49.004Z,1516647109.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:49.401Z,1516647109.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:49.808Z,1516647109.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:50.210Z,1516647110.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:50.604Z,1516647110.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:51.015Z,1516647111.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:51.424Z,1516647111.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:51.811Z,1516647111.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:52.216Z,1516647112.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:52.609Z,1516647112.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:52.988Z,1516647112.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:53.392Z,1516647113.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:53.816Z,1516647113.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:54.225Z,1516647114.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:54.629Z,1516647114.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:54.995Z,1516647114.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:55.431Z,1516647115.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:55.802Z,1516647115.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:56.208Z,1516647116.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:56.593Z,1516647116.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:57.005Z,1516647117.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:57.407Z,1516647117.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:57.827Z,1516647117.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:58.199Z,1516647118.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:58.594Z,1516647118.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:58.871Z,1516647118.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:51:59.009Z,1516647119.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:59.395Z,1516647119.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:51:59.668Z,1516647119.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:51:59.799Z,1516647119.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:00.209Z,1516647120.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:00.606Z,1516647120.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:00.994Z,1516647120.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:01.404Z,1516647121.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:01.820Z,1516647121.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:02.204Z,1516647122.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:02.594Z,1516647122.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:03.005Z,1516647123.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:03.428Z,1516647123.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:03.810Z,1516647123.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:04.198Z,1516647124.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:04.596Z,1516647124.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:05.004Z,1516647125.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:05.421Z,1516647125.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:05.839Z,1516647125.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:06.208Z,1516647126.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:06.616Z,1516647126.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:06.995Z,1516647126.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:07.416Z,1516647127.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:07.800Z,1516647127.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:08.202Z,1516647128.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:08.599Z,1516647128.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:09.018Z,1516647129.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:09.460Z,1516647129.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:09.837Z,1516647129.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:10.219Z,1516647130.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:10.608Z,1516647130.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:11.008Z,1516647131.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:11.389Z,1516647131.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:11.823Z,1516647131.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:12.220Z,1516647132.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:12.619Z,1516647132.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:12.994Z,1516647132.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:13.393Z,1516647133.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:13.800Z,1516647133.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:14.196Z,1516647134.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:14.596Z,1516647134.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:15.006Z,1516647135.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:15.412Z,1516647135.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:15.806Z,1516647135.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:16.203Z,1516647136.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:16.603Z,1516647136.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:17.008Z,1516647137.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:17.405Z,1516647137.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:17.812Z,1516647137.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:18.208Z,1516647138.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:18.605Z,1516647138.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:18.995Z,1516647138.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:19.406Z,1516647139.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:19.800Z,1516647139.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:20.204Z,1516647140.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:20.605Z,1516647140.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:21.015Z,1516647141.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:21.416Z,1516647141.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:21.808Z,1516647141.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:22.207Z,1516647142.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:22.605Z,1516647142.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:23.005Z,1516647143.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:23.466Z,1516647143.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:23.806Z,1516647143.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:24.211Z,1516647144.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:24.616Z,1516647144.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:25.005Z,1516647145.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:25.404Z,1516647145.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:25.807Z,1516647145.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:26.205Z,1516647146.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:26.605Z,1516647146.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:26.911Z,1516647146.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:52:27.015Z,1516647147.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:27.411Z,1516647147.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:27.709Z,1516647147.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:52:27.814Z,1516647147.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:28.131Z,1516647148.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:52:28.207Z,1516647148.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:28.605Z,1516647148.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:29.005Z,1516647149.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:29.418Z,1516647149.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:29.425Z,1516647149.425 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T18:52:29.426Z,1516647149.426 [Default:CheckIn:C.Wait] Stopped
2018-01-22T18:52:29.426Z,1516647149.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T18:52:29.426Z,1516647149.426 [Default:CheckIn:D] Running Loop=1
2018-01-22T18:52:29.816Z,1516647149.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:29.819Z,1516647149.819 [Default:CheckIn:D] Stopped
2018-01-22T18:52:29.819Z,1516647149.819 [Default:CheckIn:E] Running Loop=1
2018-01-22T18:52:30.217Z,1516647150.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:30.220Z,1516647150.220 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.085510 min 
2018-01-22T18:52:30.220Z,1516647150.220 [Default:CheckIn:E] Stopped
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn] Stopped
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn](INFO): Running loop #4
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn] Running Loop=4
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T18:52:30.221Z,1516647150.221 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T18:52:33.572Z,1516647153.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:33.704Z,1516647153.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:34.038Z,1516647154.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:34.436Z,1516647154.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:34.879Z,1516647154.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:35.287Z,1516647155.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:35.661Z,1516647155.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:36.059Z,1516647156.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:36.460Z,1516647156.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:36.860Z,1516647156.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:37.258Z,1516647157.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:37.657Z,1516647157.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:38.059Z,1516647158.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:38.469Z,1516647158.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:38.866Z,1516647158.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:39.264Z,1516647159.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:39.642Z,1516647159.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:40.058Z,1516647160.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:40.428Z,1516647160.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:40.856Z,1516647160.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:41.285Z,1516647161.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:41.660Z,1516647161.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:42.062Z,1516647162.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:42.448Z,1516647162.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:42.870Z,1516647162.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:43.275Z,1516647163.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:43.645Z,1516647163.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:44.095Z,1516647164.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:44.460Z,1516647164.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:44.860Z,1516647164.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:45.247Z,1516647165.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:45.644Z,1516647165.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:46.045Z,1516647166.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:46.439Z,1516647166.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:46.846Z,1516647166.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:47.249Z,1516647167.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:47.648Z,1516647167.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:48.027Z,1516647168.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:48.432Z,1516647168.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:48.836Z,1516647168.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:49.232Z,1516647169.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:49.639Z,1516647169.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:50.042Z,1516647170.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:50.442Z,1516647170.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:50.844Z,1516647170.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:51.233Z,1516647171.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:51.637Z,1516647171.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:52.034Z,1516647172.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:52.443Z,1516647172.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:52.838Z,1516647172.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:53.241Z,1516647173.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:53.638Z,1516647173.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:54.044Z,1516647174.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:54.433Z,1516647174.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:54.834Z,1516647174.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:55.235Z,1516647175.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:55.634Z,1516647175.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:56.050Z,1516647176.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:56.448Z,1516647176.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:56.848Z,1516647176.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:57.234Z,1516647177.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:57.633Z,1516647177.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:58.040Z,1516647178.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:58.443Z,1516647178.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:58.845Z,1516647178.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:59.248Z,1516647179.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:52:59.652Z,1516647179.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:00.036Z,1516647180.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:00.443Z,1516647180.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:00.843Z,1516647180.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:01.235Z,1516647181.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:01.641Z,1516647181.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:02.056Z,1516647182.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:02.447Z,1516647182.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:02.845Z,1516647182.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:03.237Z,1516647183.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:03.635Z,1516647183.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:04.035Z,1516647184.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:04.444Z,1516647184.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:04.848Z,1516647184.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:05.249Z,1516647185.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:05.646Z,1516647185.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:06.040Z,1516647186.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:06.445Z,1516647186.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:06.851Z,1516647186.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:07.245Z,1516647187.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:07.645Z,1516647187.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:08.051Z,1516647188.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:08.449Z,1516647188.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:08.846Z,1516647188.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:08.981Z,1516647188.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:09.228Z,1516647189.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:09.632Z,1516647189.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:09.777Z,1516647189.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:10.074Z,1516647190.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:10.183Z,1516647190.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:10.437Z,1516647190.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:10.854Z,1516647190.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:10.979Z,1516647190.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:11.266Z,1516647191.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:11.668Z,1516647191.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:11.775Z,1516647191.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:12.040Z,1516647192.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:12.179Z,1516647192.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:12.424Z,1516647192.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:12.836Z,1516647192.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:13.229Z,1516647193.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:13.682Z,1516647193.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:14.047Z,1516647194.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:14.448Z,1516647194.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:14.840Z,1516647194.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:15.225Z,1516647195.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:15.656Z,1516647195.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:16.037Z,1516647196.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:16.432Z,1516647196.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:16.848Z,1516647196.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:17.272Z,1516647197.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:17.649Z,1516647197.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:18.044Z,1516647198.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:18.434Z,1516647198.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:18.839Z,1516647198.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:19.236Z,1516647199.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:19.640Z,1516647199.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:20.059Z,1516647200.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:20.449Z,1516647200.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:20.845Z,1516647200.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:21.244Z,1516647201.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:21.635Z,1516647201.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:22.048Z,1516647202.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:22.438Z,1516647202.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:22.845Z,1516647202.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:22.995Z,1516647202.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:23.254Z,1516647203.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:23.645Z,1516647203.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:23.793Z,1516647203.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:24.030Z,1516647204.030 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:53:24.030Z,1516647204.030 [BPC1] Communications Fault, FailCount= 9
2018-01-22T18:53:24.030Z,1516647204.030 [BPC1](ERROR): Communications Fault
2018-01-22T18:53:24.037Z,1516647204.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:24.051Z,1516647204.051 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:53:24.207Z,1516647204.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:24.444Z,1516647204.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:24.852Z,1516647204.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:25.003Z,1516647205.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:25.251Z,1516647205.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:25.264Z,1516647205.264 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T18:53:25.264Z,1516647205.264 [BPC1] No Fault, FailCount= 9
2018-01-22T18:53:25.696Z,1516647205.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:25.799Z,1516647205.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:26.040Z,1516647206.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:26.203Z,1516647206.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:26.428Z,1516647206.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:26.853Z,1516647206.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:27.261Z,1516647207.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:27.633Z,1516647207.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:28.032Z,1516647208.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:28.432Z,1516647208.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:28.856Z,1516647208.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:29.256Z,1516647209.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:29.654Z,1516647209.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:30.032Z,1516647210.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:30.458Z,1516647210.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:33.724Z,1516647213.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:33.876Z,1516647213.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:34.223Z,1516647214.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:34.613Z,1516647214.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:35.024Z,1516647215.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:35.411Z,1516647215.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:35.883Z,1516647215.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:36.223Z,1516647216.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:36.621Z,1516647216.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:37.004Z,1516647217.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:37.075Z,1516647217.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:37.396Z,1516647217.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:37.883Z,1516647217.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:37.904Z,1516647217.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:38.226Z,1516647218.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:38.287Z,1516647218.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:38.613Z,1516647218.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:39.008Z,1516647219.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:39.406Z,1516647219.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:39.815Z,1516647219.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:40.221Z,1516647220.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:40.617Z,1516647220.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:41.027Z,1516647221.027 [BPC1](INFO): Initialized
2018-01-22T18:53:41.046Z,1516647221.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:41.407Z,1516647221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:41.820Z,1516647221.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:42.217Z,1516647222.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:42.619Z,1516647222.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:43.015Z,1516647223.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:43.416Z,1516647223.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:43.810Z,1516647223.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:44.214Z,1516647224.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:44.612Z,1516647224.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:45.004Z,1516647225.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:45.406Z,1516647225.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:45.815Z,1516647225.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:46.220Z,1516647226.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:46.620Z,1516647226.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:47.020Z,1516647227.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:47.407Z,1516647227.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:47.808Z,1516647227.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:48.216Z,1516647228.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:48.620Z,1516647228.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:49.017Z,1516647229.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:49.403Z,1516647229.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:49.869Z,1516647229.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:50.204Z,1516647230.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:50.604Z,1516647230.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:51.010Z,1516647231.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:51.083Z,1516647231.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:51.413Z,1516647231.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:51.880Z,1516647231.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:51.888Z,1516647231.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:52.212Z,1516647232.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:52.283Z,1516647232.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:53:52.602Z,1516647232.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:53.007Z,1516647233.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:53.412Z,1516647233.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:53.812Z,1516647233.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:54.210Z,1516647234.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:54.613Z,1516647234.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:55.015Z,1516647235.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:55.406Z,1516647235.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:55.814Z,1516647235.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:56.220Z,1516647236.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:56.603Z,1516647236.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:57.017Z,1516647237.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:57.420Z,1516647237.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:57.819Z,1516647237.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:58.212Z,1516647238.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:58.619Z,1516647238.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:58.995Z,1516647238.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:59.420Z,1516647239.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:53:59.811Z,1516647239.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:00.214Z,1516647240.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:00.620Z,1516647240.620 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:00.620Z,1516647240.620 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-01-22T18:54:00.620Z,1516647240.620 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:54:00.622Z,1516647240.622 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:00.622Z,1516647240.622 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-01-22T18:54:00.622Z,1516647240.622 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:54:00.624Z,1516647240.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:00.624Z,1516647240.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-01-22T18:54:00.624Z,1516647240.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:54:00.652Z,1516647240.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:54:00.652Z,1516647240.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:54:00.652Z,1516647240.652 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:54:01.033Z,1516647241.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:54:01.033Z,1516647241.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-01-22T18:54:01.034Z,1516647241.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:54:01.034Z,1516647241.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-01-22T18:54:01.063Z,1516647241.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:54:01.063Z,1516647241.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-01-22T18:54:01.405Z,1516647241.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:54:01.406Z,1516647241.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:54:01.406Z,1516647241.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:54:01.407Z,1516647241.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:54:01.407Z,1516647241.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:54:01.407Z,1516647241.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:54:01.408Z,1516647241.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:54:01.408Z,1516647241.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:54:01.408Z,1516647241.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:54:01.813Z,1516647241.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:02.219Z,1516647242.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:02.609Z,1516647242.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:03.016Z,1516647243.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:03.420Z,1516647243.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:03.875Z,1516647243.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:04.220Z,1516647244.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:04.604Z,1516647244.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:04.999Z,1516647244.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:05.404Z,1516647245.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:05.849Z,1516647245.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:06.217Z,1516647246.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:06.621Z,1516647246.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:07.016Z,1516647247.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:07.408Z,1516647247.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:07.807Z,1516647247.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:08.215Z,1516647248.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:08.615Z,1516647248.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:09.029Z,1516647249.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:09.421Z,1516647249.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:09.821Z,1516647249.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:10.212Z,1516647250.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:10.612Z,1516647250.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:11.001Z,1516647251.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:11.405Z,1516647251.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:11.809Z,1516647251.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:12.227Z,1516647252.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:12.631Z,1516647252.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:13.014Z,1516647253.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:13.405Z,1516647253.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:13.805Z,1516647253.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:14.211Z,1516647254.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:14.605Z,1516647254.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:15.012Z,1516647255.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:15.420Z,1516647255.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:15.817Z,1516647255.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:16.216Z,1516647256.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:16.612Z,1516647256.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:17.019Z,1516647257.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:17.417Z,1516647257.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:17.886Z,1516647257.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:18.217Z,1516647258.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:18.623Z,1516647258.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:19.023Z,1516647259.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:19.416Z,1516647259.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:19.853Z,1516647259.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:20.212Z,1516647260.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:20.604Z,1516647260.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:21.016Z,1516647261.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:21.413Z,1516647261.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:21.810Z,1516647261.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:22.204Z,1516647262.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:22.615Z,1516647262.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:23.004Z,1516647263.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:23.412Z,1516647263.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:23.811Z,1516647263.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:24.210Z,1516647264.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:24.613Z,1516647264.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:25.015Z,1516647265.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:25.401Z,1516647265.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:25.810Z,1516647265.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:26.220Z,1516647266.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:26.605Z,1516647266.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:27.021Z,1516647267.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:27.413Z,1516647267.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:27.816Z,1516647267.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:28.212Z,1516647268.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:28.610Z,1516647268.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:29.002Z,1516647269.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:29.416Z,1516647269.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:29.820Z,1516647269.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:30.218Z,1516647270.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:30.619Z,1516647270.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:33.925Z,1516647273.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:34.054Z,1516647274.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:34.421Z,1516647274.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:34.814Z,1516647274.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:35.220Z,1516647275.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:35.618Z,1516647275.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:36.027Z,1516647276.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:36.425Z,1516647276.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:36.821Z,1516647276.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:37.215Z,1516647277.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:37.619Z,1516647277.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:38.016Z,1516647278.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:38.423Z,1516647278.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:38.813Z,1516647278.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:39.220Z,1516647279.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:39.628Z,1516647279.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:40.022Z,1516647280.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:40.416Z,1516647280.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:40.823Z,1516647280.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:41.223Z,1516647281.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:41.633Z,1516647281.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:42.028Z,1516647282.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:42.427Z,1516647282.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:42.826Z,1516647282.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:43.208Z,1516647283.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:43.683Z,1516647283.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:44.008Z,1516647284.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:44.408Z,1516647284.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:44.816Z,1516647284.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:45.214Z,1516647285.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:45.640Z,1516647285.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:46.022Z,1516647286.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:46.408Z,1516647286.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:46.815Z,1516647286.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:47.218Z,1516647287.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:47.615Z,1516647287.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:48.024Z,1516647288.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:48.417Z,1516647288.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:48.828Z,1516647288.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:49.212Z,1516647289.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:49.649Z,1516647289.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:50.008Z,1516647290.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:50.423Z,1516647290.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:50.819Z,1516647290.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:51.219Z,1516647291.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:51.655Z,1516647291.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:52.028Z,1516647292.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:52.411Z,1516647292.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:52.823Z,1516647292.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:53.212Z,1516647293.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:53.631Z,1516647293.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:54.021Z,1516647294.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:54.423Z,1516647294.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:54.819Z,1516647294.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:55.214Z,1516647295.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:55.649Z,1516647295.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:56.012Z,1516647296.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:56.423Z,1516647296.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:56.820Z,1516647296.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:57.221Z,1516647297.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:57.661Z,1516647297.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:58.014Z,1516647298.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:58.412Z,1516647298.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:58.812Z,1516647298.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:59.212Z,1516647299.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:54:59.612Z,1516647299.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:00.034Z,1516647300.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:00.421Z,1516647300.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:00.813Z,1516647300.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:01.215Z,1516647301.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:01.609Z,1516647301.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:02.020Z,1516647302.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:02.412Z,1516647302.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:02.810Z,1516647302.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:03.216Z,1516647303.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:03.659Z,1516647303.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:04.032Z,1516647304.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:04.412Z,1516647304.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:04.814Z,1516647304.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:05.214Z,1516647305.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:05.650Z,1516647305.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:06.025Z,1516647306.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:06.425Z,1516647306.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:06.821Z,1516647306.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:07.217Z,1516647307.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:07.668Z,1516647307.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:08.023Z,1516647308.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:08.417Z,1516647308.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:08.822Z,1516647308.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:09.226Z,1516647309.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:09.673Z,1516647309.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:10.036Z,1516647310.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:10.421Z,1516647310.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:10.828Z,1516647310.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:11.209Z,1516647311.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:11.603Z,1516647311.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:12.035Z,1516647312.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:12.417Z,1516647312.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:12.815Z,1516647312.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:13.221Z,1516647313.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:13.616Z,1516647313.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:14.022Z,1516647314.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:14.416Z,1516647314.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:14.811Z,1516647314.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:15.232Z,1516647315.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:15.621Z,1516647315.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:16.027Z,1516647316.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:16.410Z,1516647316.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:16.821Z,1516647316.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:17.212Z,1516647317.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:17.671Z,1516647317.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:18.023Z,1516647318.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:18.432Z,1516647318.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:18.820Z,1516647318.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:19.223Z,1516647319.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:19.660Z,1516647319.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:20.039Z,1516647320.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:20.436Z,1516647320.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:20.830Z,1516647320.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:21.205Z,1516647321.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:21.681Z,1516647321.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:22.017Z,1516647322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:22.418Z,1516647322.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:22.814Z,1516647322.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:23.211Z,1516647323.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:23.668Z,1516647323.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:24.024Z,1516647324.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:24.426Z,1516647324.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:24.821Z,1516647324.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:25.220Z,1516647325.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:25.616Z,1516647325.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:26.024Z,1516647326.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:26.420Z,1516647326.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:26.820Z,1516647326.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:27.216Z,1516647327.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:27.619Z,1516647327.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:28.058Z,1516647328.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:28.424Z,1516647328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:28.820Z,1516647328.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:29.211Z,1516647329.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:29.610Z,1516647329.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:30.036Z,1516647330.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:30.436Z,1516647330.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:30.824Z,1516647330.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:34.174Z,1516647334.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:34.318Z,1516647334.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:34.647Z,1516647334.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:35.046Z,1516647335.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:35.448Z,1516647335.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:35.842Z,1516647335.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:36.240Z,1516647336.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:36.639Z,1516647336.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:37.048Z,1516647337.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:37.446Z,1516647337.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:37.848Z,1516647337.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:38.239Z,1516647338.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:38.641Z,1516647338.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:39.047Z,1516647339.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:39.450Z,1516647339.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:39.856Z,1516647339.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:40.243Z,1516647340.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:40.638Z,1516647340.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:41.047Z,1516647341.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:41.439Z,1516647341.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:41.838Z,1516647341.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:42.256Z,1516647342.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:42.656Z,1516647342.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:43.049Z,1516647343.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:43.447Z,1516647343.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:43.460Z,1516647343.460 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T18:55:43.839Z,1516647343.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:44.246Z,1516647344.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:44.647Z,1516647344.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:45.049Z,1516647345.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:45.452Z,1516647345.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:45.849Z,1516647345.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:46.239Z,1516647346.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:46.638Z,1516647346.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:47.049Z,1516647347.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:47.452Z,1516647347.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:47.848Z,1516647347.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:48.248Z,1516647348.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:48.648Z,1516647348.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:49.050Z,1516647349.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:49.457Z,1516647349.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:49.850Z,1516647349.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:50.249Z,1516647350.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:50.651Z,1516647350.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:51.050Z,1516647351.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:51.452Z,1516647351.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:51.856Z,1516647351.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:52.248Z,1516647352.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:52.649Z,1516647352.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:53.060Z,1516647353.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:53.453Z,1516647353.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:53.860Z,1516647353.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:54.240Z,1516647354.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:54.656Z,1516647354.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:55.053Z,1516647355.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:55.455Z,1516647355.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:55.859Z,1516647355.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:56.253Z,1516647356.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:56.655Z,1516647356.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:57.050Z,1516647357.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:57.453Z,1516647357.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:57.861Z,1516647357.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:58.256Z,1516647358.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:58.652Z,1516647358.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:59.058Z,1516647359.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:59.462Z,1516647359.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:55:59.860Z,1516647359.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:00.241Z,1516647360.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:00.636Z,1516647360.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:01.068Z,1516647361.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:01.465Z,1516647361.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:01.869Z,1516647361.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:02.244Z,1516647362.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:02.644Z,1516647362.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:03.050Z,1516647363.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:03.445Z,1516647363.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:03.869Z,1516647363.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:04.238Z,1516647364.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:04.640Z,1516647364.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:05.043Z,1516647365.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:05.445Z,1516647365.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:05.857Z,1516647365.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:06.253Z,1516647366.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:06.652Z,1516647366.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:07.049Z,1516647367.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:07.452Z,1516647367.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:07.858Z,1516647367.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:08.248Z,1516647368.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:08.656Z,1516647368.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:09.055Z,1516647369.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:09.454Z,1516647369.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:09.856Z,1516647369.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:10.241Z,1516647370.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:10.641Z,1516647370.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:11.068Z,1516647371.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:11.464Z,1516647371.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:11.852Z,1516647371.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:12.251Z,1516647372.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:12.650Z,1516647372.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:13.061Z,1516647373.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:13.457Z,1516647373.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:13.861Z,1516647373.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:14.244Z,1516647374.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:14.652Z,1516647374.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:15.053Z,1516647375.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:15.457Z,1516647375.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:15.859Z,1516647375.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:16.243Z,1516647376.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:16.648Z,1516647376.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:17.046Z,1516647377.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:17.453Z,1516647377.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:17.854Z,1516647377.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:18.254Z,1516647378.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:18.647Z,1516647378.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:19.054Z,1516647379.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:19.456Z,1516647379.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:19.852Z,1516647379.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:20.258Z,1516647380.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:20.668Z,1516647380.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:21.054Z,1516647381.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:21.456Z,1516647381.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:21.866Z,1516647381.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:22.257Z,1516647382.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:22.632Z,1516647382.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x22943 got:0x49303
2018-01-22T18:56:22.665Z,1516647382.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:23.040Z,1516647383.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:23.462Z,1516647383.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:23.868Z,1516647383.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:24.269Z,1516647384.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:24.643Z,1516647384.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:25.042Z,1516647385.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:25.448Z,1516647385.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:25.837Z,1516647385.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x48052 got:0x6593
2018-01-22T18:56:25.870Z,1516647385.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:26.248Z,1516647386.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:26.646Z,1516647386.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:27.049Z,1516647387.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:27.443Z,1516647387.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:27.845Z,1516647387.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:28.242Z,1516647388.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:28.664Z,1516647388.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:29.041Z,1516647389.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x10759 got:0x56966
2018-01-22T18:56:29.068Z,1516647389.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:29.454Z,1516647389.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:29.860Z,1516647389.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:30.281Z,1516647390.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:30.639Z,1516647390.639 [PNI_TCM](ERROR): CRC does not match. Expected:0x10764 got:0x16879
2018-01-22T18:56:30.664Z,1516647390.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:31.048Z,1516647391.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:34.392Z,1516647394.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:34.530Z,1516647394.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:34.862Z,1516647394.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:35.262Z,1516647395.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:35.662Z,1516647395.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:36.053Z,1516647396.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:36.468Z,1516647396.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:36.855Z,1516647396.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:37.273Z,1516647397.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:37.668Z,1516647397.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:38.130Z,1516647398.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:38.461Z,1516647398.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:38.863Z,1516647398.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:39.261Z,1516647399.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:39.661Z,1516647399.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:40.117Z,1516647400.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:40.481Z,1516647400.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:40.881Z,1516647400.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:41.282Z,1516647401.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:41.651Z,1516647401.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:42.055Z,1516647402.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:42.467Z,1516647402.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:42.855Z,1516647402.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:43.264Z,1516647403.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:43.668Z,1516647403.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:44.064Z,1516647404.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:44.471Z,1516647404.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:44.872Z,1516647404.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:45.247Z,1516647405.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:45.648Z,1516647405.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:46.075Z,1516647406.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:46.470Z,1516647406.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:46.877Z,1516647406.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:47.274Z,1516647407.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:47.654Z,1516647407.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:48.075Z,1516647408.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:48.476Z,1516647408.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:48.851Z,1516647408.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:49.262Z,1516647409.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:49.661Z,1516647409.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:50.058Z,1516647410.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:50.460Z,1516647410.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:50.860Z,1516647410.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:51.260Z,1516647411.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:51.655Z,1516647411.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:52.087Z,1516647412.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:52.472Z,1516647412.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:52.869Z,1516647412.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:53.276Z,1516647413.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:53.655Z,1516647413.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:54.054Z,1516647414.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:54.466Z,1516647414.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:54.865Z,1516647414.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:55.266Z,1516647415.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:55.669Z,1516647415.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:56.074Z,1516647416.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:56.454Z,1516647416.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:56.856Z,1516647416.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:57.250Z,1516647417.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:57.656Z,1516647417.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:58.056Z,1516647418.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:58.462Z,1516647418.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:58.886Z,1516647418.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:59.261Z,1516647419.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:56:59.652Z,1516647419.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:00.053Z,1516647420.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:00.460Z,1516647420.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:00.854Z,1516647420.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:01.258Z,1516647421.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:01.661Z,1516647421.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:01.662Z,1516647421.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-01-22T18:57:01.662Z,1516647421.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T18:57:01.664Z,1516647421.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:01.664Z,1516647421.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-01-22T18:57:01.664Z,1516647421.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T18:57:01.666Z,1516647421.666 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:01.666Z,1516647421.666 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-01-22T18:57:01.666Z,1516647421.666 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T18:57:01.689Z,1516647421.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T18:57:01.689Z,1516647421.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T18:57:01.690Z,1516647421.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T18:57:02.075Z,1516647422.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T18:57:02.075Z,1516647422.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-01-22T18:57:02.076Z,1516647422.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T18:57:02.076Z,1516647422.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-01-22T18:57:02.076Z,1516647422.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T18:57:02.076Z,1516647422.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-01-22T18:57:02.453Z,1516647422.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T18:57:02.454Z,1516647422.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:57:02.454Z,1516647422.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:57:02.455Z,1516647422.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T18:57:02.455Z,1516647422.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:57:02.455Z,1516647422.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:57:02.456Z,1516647422.456 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T18:57:02.456Z,1516647422.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T18:57:02.456Z,1516647422.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T18:57:02.863Z,1516647422.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:03.255Z,1516647423.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:03.655Z,1516647423.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:04.068Z,1516647424.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:04.476Z,1516647424.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:04.869Z,1516647424.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:05.276Z,1516647425.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:05.657Z,1516647425.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:06.068Z,1516647426.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:06.456Z,1516647426.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:06.871Z,1516647426.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:07.262Z,1516647427.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:07.661Z,1516647427.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:08.059Z,1516647428.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:08.458Z,1516647428.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:08.868Z,1516647428.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:09.268Z,1516647429.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:09.666Z,1516647429.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:10.067Z,1516647430.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:10.476Z,1516647430.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:10.880Z,1516647430.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:11.270Z,1516647431.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:11.672Z,1516647431.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:12.071Z,1516647432.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:12.453Z,1516647432.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:12.856Z,1516647432.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:13.279Z,1516647433.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:13.687Z,1516647433.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:14.059Z,1516647434.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:14.461Z,1516647434.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:14.856Z,1516647434.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:15.254Z,1516647435.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:15.662Z,1516647435.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:16.060Z,1516647436.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:16.464Z,1516647436.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:16.862Z,1516647436.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:17.259Z,1516647437.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:17.654Z,1516647437.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:18.053Z,1516647438.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:18.460Z,1516647438.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:18.858Z,1516647438.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:19.264Z,1516647439.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:19.672Z,1516647439.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:20.076Z,1516647440.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:20.475Z,1516647440.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:20.851Z,1516647440.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:21.251Z,1516647441.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:21.656Z,1516647441.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:22.050Z,1516647442.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:22.458Z,1516647442.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:22.861Z,1516647442.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:23.288Z,1516647443.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:23.655Z,1516647443.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:24.059Z,1516647444.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:24.460Z,1516647444.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:24.853Z,1516647444.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:25.258Z,1516647445.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:25.661Z,1516647445.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:26.058Z,1516647446.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:26.454Z,1516647446.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:26.860Z,1516647446.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:27.255Z,1516647447.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:27.657Z,1516647447.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:28.060Z,1516647448.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:28.466Z,1516647448.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:28.868Z,1516647448.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:29.265Z,1516647449.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:29.655Z,1516647449.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:30.060Z,1516647450.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:30.468Z,1516647450.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:30.475Z,1516647450.475 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T18:52:30.2Z
2018-01-22T18:57:30.475Z,1516647450.475 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T18:57:30.476Z,1516647450.476 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T18:57:30.864Z,1516647450.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:31.384Z,1516647451.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:34.607Z,1516647454.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:34.700Z,1516647454.700 [DataOverHttps](INFO): Sending 104 bytes from file Logs/20180122T180533/Courier0016.lzma
2018-01-22T18:57:34.769Z,1516647454.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:35.081Z,1516647455.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:35.433Z,1516647455.433 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0016.lzma.bak
2018-01-22T18:57:35.433Z,1516647455.433 [DataOverHttps](INFO): SBD MOMSN=7750927
2018-01-22T18:57:35.488Z,1516647455.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:36.442Z,1516647456.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:36.600Z,1516647456.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:42.518Z,1516647462.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:42.689Z,1516647462.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:43.052Z,1516647463.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:43.427Z,1516647463.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:43.893Z,1516647463.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:44.268Z,1516647464.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:49.790Z,1516647469.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:49.867Z,1516647469.867 [DataOverHttps](INFO): Sending 152 bytes from file Logs/20180122T180533/Express0017.lzma
2018-01-22T18:57:49.930Z,1516647469.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:50.280Z,1516647470.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:50.617Z,1516647470.617 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0017.lzma.bak
2018-01-22T18:57:50.617Z,1516647470.617 [DataOverHttps](INFO): SBD MOMSN=7750929
2018-01-22T18:57:50.665Z,1516647470.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:51.264Z,1516647471.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:51.268Z,1516647471.268 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T18:57:51.268Z,1516647471.268 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T18:57:51.268Z,1516647471.268 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T18:57:51.487Z,1516647471.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:54.834Z,1516647474.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:54.976Z,1516647474.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:55.326Z,1516647475.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:55.728Z,1516647475.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:56.124Z,1516647476.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:56.528Z,1516647476.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:56.932Z,1516647476.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:57.328Z,1516647477.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:57.722Z,1516647477.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:58.136Z,1516647478.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:58.529Z,1516647478.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:58.924Z,1516647478.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:59.334Z,1516647479.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:57:59.747Z,1516647479.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:00.173Z,1516647480.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:00.524Z,1516647480.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:00.925Z,1516647480.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:01.323Z,1516647481.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:01.735Z,1516647481.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:02.123Z,1516647482.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:02.545Z,1516647482.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:02.948Z,1516647482.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:03.334Z,1516647483.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:03.747Z,1516647483.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:04.128Z,1516647484.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:04.520Z,1516647484.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:04.924Z,1516647484.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:05.330Z,1516647485.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:05.750Z,1516647485.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:06.125Z,1516647486.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:06.605Z,1516647486.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:06.936Z,1516647486.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:07.320Z,1516647487.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:07.716Z,1516647487.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:08.120Z,1516647488.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:08.526Z,1516647488.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:08.929Z,1516647488.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:09.330Z,1516647489.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:09.718Z,1516647489.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:10.127Z,1516647490.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:10.528Z,1516647490.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:10.918Z,1516647490.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:11.353Z,1516647491.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:11.734Z,1516647491.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:12.125Z,1516647492.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:12.528Z,1516647492.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:12.922Z,1516647492.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:13.322Z,1516647493.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:13.731Z,1516647493.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:14.128Z,1516647494.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:14.534Z,1516647494.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:14.944Z,1516647494.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:15.333Z,1516647495.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:15.723Z,1516647495.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:16.131Z,1516647496.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:16.530Z,1516647496.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:16.922Z,1516647496.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:17.335Z,1516647497.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:17.740Z,1516647497.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:18.133Z,1516647498.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:18.536Z,1516647498.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:18.923Z,1516647498.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:19.323Z,1516647499.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:19.735Z,1516647499.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:20.136Z,1516647500.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:20.538Z,1516647500.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:20.937Z,1516647500.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:21.335Z,1516647501.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:21.723Z,1516647501.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:22.130Z,1516647502.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:22.524Z,1516647502.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:22.924Z,1516647502.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:23.329Z,1516647503.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:23.736Z,1516647503.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:24.144Z,1516647504.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:24.531Z,1516647504.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:24.923Z,1516647504.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:25.322Z,1516647505.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:25.732Z,1516647505.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:26.129Z,1516647506.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:26.534Z,1516647506.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:26.937Z,1516647506.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:27.341Z,1516647507.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:27.733Z,1516647507.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:28.133Z,1516647508.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:28.532Z,1516647508.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:28.932Z,1516647508.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:29.344Z,1516647509.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:29.739Z,1516647509.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:30.142Z,1516647510.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:30.531Z,1516647510.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:30.936Z,1516647510.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:31.316Z,1516647511.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:31.475Z,1516647511.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:31.717Z,1516647511.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:32.116Z,1516647512.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:32.272Z,1516647512.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:32.543Z,1516647512.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:32.675Z,1516647512.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:32.956Z,1516647512.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:33.352Z,1516647513.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:33.724Z,1516647513.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:34.129Z,1516647514.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:34.536Z,1516647514.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:34.934Z,1516647514.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:35.330Z,1516647515.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:35.732Z,1516647515.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:36.132Z,1516647516.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:36.528Z,1516647516.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:36.923Z,1516647516.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:37.322Z,1516647517.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:37.726Z,1516647517.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:38.129Z,1516647518.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:38.534Z,1516647518.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:38.937Z,1516647518.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:39.332Z,1516647519.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:39.722Z,1516647519.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:40.125Z,1516647520.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:40.524Z,1516647520.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:40.923Z,1516647520.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:41.327Z,1516647521.327 [BPC1](ERROR): Failed to receive battery data
2018-01-22T18:58:41.327Z,1516647521.327 [BPC1] Communications Fault, FailCount= 10
2018-01-22T18:58:41.327Z,1516647521.327 [BPC1](ERROR): Communications Fault
2018-01-22T18:58:41.334Z,1516647521.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:41.347Z,1516647521.347 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T18:58:41.347Z,1516647521.347 [CBIT](CRITICAL): Communications Fault in component: BPC1
2018-01-22T18:58:41.738Z,1516647521.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:41.749Z,1516647521.749 [CBIT](INFO): Critical error at 20180122T185841
2018-01-22T18:58:42.132Z,1516647522.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:42.536Z,1516647522.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:42.939Z,1516647522.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:43.334Z,1516647523.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:43.747Z,1516647523.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:44.133Z,1516647524.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:44.539Z,1516647524.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:44.936Z,1516647524.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:45.341Z,1516647525.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:45.529Z,1516647525.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:45.745Z,1516647525.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:46.129Z,1516647526.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:46.324Z,1516647526.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:46.532Z,1516647526.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:46.727Z,1516647526.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:58:46.918Z,1516647526.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:47.330Z,1516647527.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:47.729Z,1516647527.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:48.125Z,1516647528.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:48.528Z,1516647528.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:48.927Z,1516647528.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:49.331Z,1516647529.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:49.740Z,1516647529.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:50.140Z,1516647530.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:50.527Z,1516647530.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:50.931Z,1516647530.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:51.345Z,1516647531.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:51.735Z,1516647531.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:54.994Z,1516647534.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:55.121Z,1516647535.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:55.488Z,1516647535.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:55.893Z,1516647535.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:56.285Z,1516647536.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:56.688Z,1516647536.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:57.104Z,1516647537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:57.492Z,1516647537.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:57.878Z,1516647537.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:58.332Z,1516647538.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:58.683Z,1516647538.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:59.070Z,1516647539.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:59.497Z,1516647539.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:58:59.897Z,1516647539.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:00.352Z,1516647540.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:00.680Z,1516647540.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:01.074Z,1516647541.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:01.484Z,1516647541.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:01.884Z,1516647541.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:02.278Z,1516647542.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:02.694Z,1516647542.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:03.102Z,1516647543.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:03.489Z,1516647543.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:03.878Z,1516647543.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:04.295Z,1516647544.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:04.684Z,1516647544.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:05.070Z,1516647545.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:05.491Z,1516647545.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:05.904Z,1516647545.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:06.292Z,1516647546.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:06.688Z,1516647546.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:07.080Z,1516647547.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:07.480Z,1516647547.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:07.890Z,1516647547.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:08.291Z,1516647548.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:08.696Z,1516647548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:09.098Z,1516647549.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:09.489Z,1516647549.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:09.888Z,1516647549.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:10.289Z,1516647550.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:10.688Z,1516647550.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:11.088Z,1516647551.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:11.499Z,1516647551.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:11.895Z,1516647551.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:12.359Z,1516647552.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:12.680Z,1516647552.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:13.074Z,1516647553.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:13.484Z,1516647553.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:13.579Z,1516647553.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:13.880Z,1516647553.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:14.351Z,1516647554.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:14.376Z,1516647554.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:14.681Z,1516647554.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:14.779Z,1516647554.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:15.086Z,1516647555.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:15.481Z,1516647555.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:15.575Z,1516647555.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:15.878Z,1516647555.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:16.284Z,1516647556.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:16.371Z,1516647556.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:16.685Z,1516647556.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:16.775Z,1516647556.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:17.078Z,1516647557.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:17.440Z,1516647557.440 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T18:59:17.440Z,1516647557.440 [NAL9602] Data Fault, FailCount= 5
2018-01-22T18:59:17.440Z,1516647557.440 [NAL9602](ERROR): Data Fault
2018-01-22T18:59:17.496Z,1516647557.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:17.521Z,1516647557.521 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T18:59:17.521Z,1516647557.521 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-22T18:59:17.571Z,1516647557.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:17.840Z,1516647557.840 [NAL9602](INFO): Powering down
2018-01-22T18:59:17.884Z,1516647557.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:17.907Z,1516647557.907 [CBIT](INFO): Critical error at 20180122T185917
2018-01-22T18:59:18.286Z,1516647558.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:18.368Z,1516647558.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:18.686Z,1516647558.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:18.771Z,1516647558.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:19.070Z,1516647559.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:19.492Z,1516647559.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:19.567Z,1516647559.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:19.876Z,1516647559.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:20.275Z,1516647560.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:20.363Z,1516647560.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:20.678Z,1516647560.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:20.767Z,1516647560.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:21.074Z,1516647561.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:21.474Z,1516647561.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:21.563Z,1516647561.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:21.874Z,1516647561.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:22.282Z,1516647562.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:22.359Z,1516647562.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:22.683Z,1516647562.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:22.763Z,1516647562.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:23.077Z,1516647563.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:23.478Z,1516647563.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:23.559Z,1516647563.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:23.884Z,1516647563.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:24.304Z,1516647564.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:24.355Z,1516647564.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:24.684Z,1516647564.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:24.759Z,1516647564.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:25.083Z,1516647565.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:25.484Z,1516647565.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:25.555Z,1516647565.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:25.883Z,1516647565.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:26.284Z,1516647566.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:26.352Z,1516647566.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:26.675Z,1516647566.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:26.795Z,1516647566.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:27.080Z,1516647567.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:27.475Z,1516647567.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:27.591Z,1516647567.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:27.880Z,1516647567.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:28.275Z,1516647568.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:28.387Z,1516647568.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:28.684Z,1516647568.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:28.791Z,1516647568.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:29.080Z,1516647569.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:29.484Z,1516647569.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:29.587Z,1516647569.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:29.881Z,1516647569.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:30.286Z,1516647570.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:30.383Z,1516647570.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:30.696Z,1516647570.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:30.787Z,1516647570.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:31.078Z,1516647571.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:31.477Z,1516647571.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:31.583Z,1516647571.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:31.886Z,1516647571.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:32.284Z,1516647572.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:32.379Z,1516647572.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:32.686Z,1516647572.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:32.783Z,1516647572.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:33.086Z,1516647573.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:33.497Z,1516647573.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:33.579Z,1516647573.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:33.878Z,1516647573.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:34.287Z,1516647574.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:34.375Z,1516647574.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:34.688Z,1516647574.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:34.779Z,1516647574.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:35.088Z,1516647575.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:35.489Z,1516647575.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:35.575Z,1516647575.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:35.888Z,1516647575.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:36.288Z,1516647576.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:36.372Z,1516647576.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:36.690Z,1516647576.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:36.775Z,1516647576.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:37.070Z,1516647577.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:37.492Z,1516647577.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:37.571Z,1516647577.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:37.870Z,1516647577.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:38.278Z,1516647578.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:38.368Z,1516647578.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:38.674Z,1516647578.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:38.771Z,1516647578.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:39.074Z,1516647579.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:39.473Z,1516647579.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:39.568Z,1516647579.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:39.873Z,1516647579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:40.273Z,1516647580.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:40.365Z,1516647580.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:40.681Z,1516647580.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:40.803Z,1516647580.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:41.081Z,1516647581.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:41.479Z,1516647581.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:41.600Z,1516647581.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:41.882Z,1516647581.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:42.286Z,1516647582.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:42.396Z,1516647582.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:42.688Z,1516647582.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:42.799Z,1516647582.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:43.077Z,1516647583.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:43.477Z,1516647583.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:43.595Z,1516647583.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:43.885Z,1516647583.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:44.284Z,1516647584.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:44.391Z,1516647584.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:44.677Z,1516647584.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:44.795Z,1516647584.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:45.085Z,1516647585.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:45.477Z,1516647585.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:45.591Z,1516647585.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:45.877Z,1516647585.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:46.284Z,1516647586.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:46.387Z,1516647586.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:46.685Z,1516647586.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:46.791Z,1516647586.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:47.077Z,1516647587.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:47.488Z,1516647587.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:47.587Z,1516647587.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:47.877Z,1516647587.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:48.284Z,1516647588.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:48.383Z,1516647588.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:48.686Z,1516647588.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:48.787Z,1516647588.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:49.084Z,1516647589.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:49.483Z,1516647589.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:49.583Z,1516647589.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:49.888Z,1516647589.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:50.285Z,1516647590.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:50.379Z,1516647590.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:50.684Z,1516647590.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:50.783Z,1516647590.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:51.086Z,1516647591.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:51.484Z,1516647591.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:51.579Z,1516647591.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:51.892Z,1516647591.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:52.375Z,1516647592.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:52.779Z,1516647592.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:53.575Z,1516647593.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:54.377Z,1516647594.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:54.820Z,1516647594.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:55.188Z,1516647595.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:55.308Z,1516647595.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:55.631Z,1516647595.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:55.659Z,1516647595.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:56.065Z,1516647596.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:56.427Z,1516647596.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:56.463Z,1516647596.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:56.831Z,1516647596.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:56.868Z,1516647596.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:57.261Z,1516647597.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:57.627Z,1516647597.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:57.664Z,1516647597.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:58.096Z,1516647598.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:58.423Z,1516647598.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:58.472Z,1516647598.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:58.828Z,1516647598.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:58.870Z,1516647598.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:59.261Z,1516647599.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T18:59:59.623Z,1516647599.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T18:59:59.669Z,1516647599.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:00.112Z,1516647600.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:00.419Z,1516647600.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:00.472Z,1516647600.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:00.823Z,1516647600.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:00.868Z,1516647600.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:01.254Z,1516647601.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:01.619Z,1516647601.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:01.676Z,1516647601.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:02.104Z,1516647602.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:02.431Z,1516647602.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:02.496Z,1516647602.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:02.496Z,1516647602.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-01-22T19:00:02.496Z,1516647602.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:00:02.498Z,1516647602.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:02.498Z,1516647602.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-01-22T19:00:02.498Z,1516647602.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:00:02.500Z,1516647602.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:02.500Z,1516647602.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-01-22T19:00:02.500Z,1516647602.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:00:02.512Z,1516647602.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:00:02.512Z,1516647602.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:00:02.512Z,1516647602.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:00:02.835Z,1516647602.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:02.894Z,1516647602.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:00:02.894Z,1516647602.894 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-01-22T19:00:02.899Z,1516647602.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:00:02.899Z,1516647602.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-01-22T19:00:02.899Z,1516647602.899 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:00:02.900Z,1516647602.900 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-01-22T19:00:03.261Z,1516647603.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:00:03.261Z,1516647603.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:00:03.261Z,1516647603.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:00:03.262Z,1516647603.262 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:00:03.262Z,1516647603.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:00:03.267Z,1516647603.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:00:03.267Z,1516647603.267 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:00:03.267Z,1516647603.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:00:03.268Z,1516647603.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:00:03.632Z,1516647603.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:03.668Z,1516647603.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:04.117Z,1516647604.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:04.428Z,1516647604.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:04.484Z,1516647604.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:04.832Z,1516647604.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:04.865Z,1516647604.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:05.268Z,1516647605.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:05.628Z,1516647605.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:05.671Z,1516647605.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:06.117Z,1516647606.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:06.423Z,1516647606.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:06.456Z,1516647606.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:06.828Z,1516647606.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:06.855Z,1516647606.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:07.260Z,1516647607.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:07.623Z,1516647607.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:07.660Z,1516647607.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:08.058Z,1516647608.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:08.420Z,1516647608.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:08.496Z,1516647608.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:08.851Z,1516647608.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:08.859Z,1516647608.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:09.259Z,1516647609.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:09.647Z,1516647609.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:09.664Z,1516647609.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:10.057Z,1516647610.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:10.444Z,1516647610.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:10.489Z,1516647610.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:10.847Z,1516647610.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:10.862Z,1516647610.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:11.261Z,1516647611.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:11.643Z,1516647611.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:11.663Z,1516647611.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:12.120Z,1516647612.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:12.439Z,1516647612.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:12.476Z,1516647612.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:12.843Z,1516647612.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:12.867Z,1516647612.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:13.268Z,1516647613.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:13.640Z,1516647613.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:13.672Z,1516647613.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:14.143Z,1516647614.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:14.436Z,1516647614.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:14.466Z,1516647614.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:14.840Z,1516647614.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:14.870Z,1516647614.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:15.270Z,1516647615.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:15.636Z,1516647615.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:15.676Z,1516647615.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:16.124Z,1516647616.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:16.431Z,1516647616.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:16.484Z,1516647616.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:16.836Z,1516647616.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:16.871Z,1516647616.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:17.254Z,1516647617.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:17.631Z,1516647617.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:17.655Z,1516647617.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:18.126Z,1516647618.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:18.428Z,1516647618.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:18.456Z,1516647618.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:18.832Z,1516647618.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:18.860Z,1516647618.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:19.258Z,1516647619.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:19.627Z,1516647619.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:19.664Z,1516647619.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:20.064Z,1516647620.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:20.424Z,1516647620.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:20.479Z,1516647620.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:20.828Z,1516647620.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:20.867Z,1516647620.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:21.266Z,1516647621.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:21.623Z,1516647621.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:21.666Z,1516647621.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:22.072Z,1516647622.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:22.420Z,1516647622.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:22.515Z,1516647622.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:22.868Z,1516647622.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:22.903Z,1516647622.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:23.264Z,1516647623.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:23.670Z,1516647623.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:23.699Z,1516647623.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:24.068Z,1516647624.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:24.495Z,1516647624.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:24.508Z,1516647624.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:24.868Z,1516647624.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:24.899Z,1516647624.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:25.268Z,1516647625.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:25.672Z,1516647625.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:25.695Z,1516647625.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:26.123Z,1516647626.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:26.463Z,1516647626.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:26.491Z,1516647626.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:26.859Z,1516647626.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:26.895Z,1516647626.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:27.263Z,1516647627.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:27.657Z,1516647627.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:27.691Z,1516647627.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:28.138Z,1516647628.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:28.461Z,1516647628.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:28.487Z,1516647628.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:28.865Z,1516647628.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:28.891Z,1516647628.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:29.264Z,1516647629.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:29.666Z,1516647629.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:29.687Z,1516647629.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:30.122Z,1516647630.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:30.461Z,1516647630.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:30.483Z,1516647630.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:30.869Z,1516647630.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:30.887Z,1516647630.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:31.261Z,1516647631.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:31.661Z,1516647631.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:31.683Z,1516647631.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:32.135Z,1516647632.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:32.454Z,1516647632.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:32.479Z,1516647632.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:32.853Z,1516647632.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:32.883Z,1516647632.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:33.254Z,1516647633.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:33.654Z,1516647633.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:33.679Z,1516647633.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:34.061Z,1516647634.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:34.463Z,1516647634.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:34.475Z,1516647634.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:34.871Z,1516647634.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:34.879Z,1516647634.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:35.261Z,1516647635.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:35.669Z,1516647635.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:35.675Z,1516647635.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:36.061Z,1516647636.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:36.471Z,1516647636.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:36.498Z,1516647636.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:36.876Z,1516647636.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:36.927Z,1516647636.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:37.260Z,1516647637.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:37.653Z,1516647637.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:37.723Z,1516647637.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:38.054Z,1516647638.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:38.505Z,1516647638.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:38.519Z,1516647638.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:38.857Z,1516647638.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:38.935Z,1516647638.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:39.257Z,1516647639.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:39.657Z,1516647639.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:39.731Z,1516647639.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:40.057Z,1516647640.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:40.464Z,1516647640.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:40.527Z,1516647640.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:40.870Z,1516647640.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:40.931Z,1516647640.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:41.261Z,1516647641.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:41.671Z,1516647641.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:41.727Z,1516647641.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:42.061Z,1516647642.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:42.461Z,1516647642.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:42.523Z,1516647642.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:42.869Z,1516647642.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:42.927Z,1516647642.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:43.265Z,1516647643.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:43.661Z,1516647643.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:43.723Z,1516647643.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:44.069Z,1516647644.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:44.461Z,1516647644.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:44.519Z,1516647644.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:44.862Z,1516647644.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:44.923Z,1516647644.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:45.270Z,1516647645.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:45.661Z,1516647645.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:45.719Z,1516647645.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:46.061Z,1516647646.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:46.477Z,1516647646.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:46.515Z,1516647646.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:46.868Z,1516647646.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:46.919Z,1516647646.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:47.268Z,1516647647.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:47.669Z,1516647647.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:47.715Z,1516647647.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:48.068Z,1516647648.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:48.469Z,1516647648.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:48.511Z,1516647648.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:48.869Z,1516647648.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:48.915Z,1516647648.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:49.268Z,1516647649.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:49.676Z,1516647649.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:49.711Z,1516647649.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:50.054Z,1516647650.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:50.507Z,1516647650.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:50.528Z,1516647650.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:50.854Z,1516647650.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:50.951Z,1516647650.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:51.258Z,1516647651.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:51.655Z,1516647651.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:51.747Z,1516647651.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:52.061Z,1516647652.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:52.543Z,1516647652.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:52.947Z,1516647652.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:53.743Z,1516647653.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:54.539Z,1516647654.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:54.943Z,1516647654.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:55.441Z,1516647655.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:55.556Z,1516647655.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:55.739Z,1516647655.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:55.902Z,1516647655.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:56.340Z,1516647656.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:56.535Z,1516647656.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:56.710Z,1516647656.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:56.939Z,1516647656.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:57.102Z,1516647657.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:57.505Z,1516647657.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:57.735Z,1516647657.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:57.901Z,1516647657.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:58.309Z,1516647658.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:58.531Z,1516647658.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:58.712Z,1516647658.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:58.935Z,1516647658.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:59.101Z,1516647659.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:59.501Z,1516647659.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:00:59.731Z,1516647659.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:00:59.901Z,1516647659.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:00.309Z,1516647660.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:00.527Z,1516647660.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:00.712Z,1516647660.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:00.931Z,1516647660.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:01.101Z,1516647661.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:01.505Z,1516647661.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:01.727Z,1516647661.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:01.905Z,1516647661.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:02.306Z,1516647662.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:02.523Z,1516647662.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:02.710Z,1516647662.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:02.927Z,1516647662.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:03.102Z,1516647663.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:03.501Z,1516647663.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:03.723Z,1516647663.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:03.906Z,1516647663.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:04.306Z,1516647664.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:04.520Z,1516647664.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:04.710Z,1516647664.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:04.923Z,1516647664.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:05.106Z,1516647665.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:05.505Z,1516647665.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:05.721Z,1516647665.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:05.907Z,1516647665.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:06.304Z,1516647666.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:06.516Z,1516647666.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:06.704Z,1516647666.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:06.919Z,1516647666.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:07.106Z,1516647667.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:07.508Z,1516647667.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:07.715Z,1516647667.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:07.908Z,1516647667.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:08.317Z,1516647668.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:08.511Z,1516647668.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:08.710Z,1516647668.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:08.915Z,1516647668.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:09.109Z,1516647669.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:09.510Z,1516647669.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:09.711Z,1516647669.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:09.904Z,1516647669.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:10.309Z,1516647670.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:10.507Z,1516647670.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:10.716Z,1516647670.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:10.911Z,1516647670.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:11.110Z,1516647671.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:11.504Z,1516647671.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:11.708Z,1516647671.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:11.912Z,1516647671.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:12.314Z,1516647672.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:12.503Z,1516647672.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:12.712Z,1516647672.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:12.907Z,1516647672.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:13.105Z,1516647673.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:13.505Z,1516647673.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:13.703Z,1516647673.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:13.915Z,1516647673.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:14.307Z,1516647674.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:14.499Z,1516647674.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:14.712Z,1516647674.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:14.903Z,1516647674.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:15.114Z,1516647675.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:15.520Z,1516647675.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:15.699Z,1516647675.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:15.908Z,1516647675.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:16.315Z,1516647676.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:16.495Z,1516647676.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:16.716Z,1516647676.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:16.899Z,1516647676.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:17.111Z,1516647677.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:17.515Z,1516647677.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:17.529Z,1516647677.529 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:01:17.529Z,1516647677.529 [NAL9602] No Fault, FailCount= 5
2018-01-22T19:01:17.695Z,1516647677.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:17.876Z,1516647677.876 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:01:17.918Z,1516647677.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:18.309Z,1516647678.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:18.493Z,1516647678.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:18.724Z,1516647678.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:18.937Z,1516647678.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:19.120Z,1516647679.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:19.510Z,1516647679.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:19.731Z,1516647679.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:19.909Z,1516647679.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:20.323Z,1516647680.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:20.529Z,1516647680.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:20.718Z,1516647680.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:20.939Z,1516647680.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:21.116Z,1516647681.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:21.512Z,1516647681.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:21.735Z,1516647681.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:21.918Z,1516647681.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:22.313Z,1516647682.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:22.531Z,1516647682.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:22.722Z,1516647682.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:22.935Z,1516647682.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:23.116Z,1516647683.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:23.519Z,1516647683.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:23.731Z,1516647683.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:23.918Z,1516647683.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:24.319Z,1516647684.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:24.527Z,1516647684.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:24.716Z,1516647684.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:24.931Z,1516647684.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:25.119Z,1516647685.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:25.505Z,1516647685.505 [PNI_TCM](ERROR): CRC does not match. Expected:0x27242 got:0x49303
2018-01-22T19:01:25.528Z,1516647685.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:25.727Z,1516647685.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:25.917Z,1516647685.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:26.313Z,1516647686.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:26.523Z,1516647686.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:26.724Z,1516647686.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:26.927Z,1516647686.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:27.114Z,1516647687.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:27.520Z,1516647687.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:27.723Z,1516647687.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:27.921Z,1516647687.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:28.324Z,1516647688.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:28.519Z,1516647688.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:28.737Z,1516647688.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:28.923Z,1516647688.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:29.068Z,1516647689.068 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:01:29.122Z,1516647689.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:29.523Z,1516647689.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:29.719Z,1516647689.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:29.930Z,1516647689.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:30.332Z,1516647690.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:30.515Z,1516647690.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:30.728Z,1516647690.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:30.919Z,1516647690.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:31.124Z,1516647691.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:31.525Z,1516647691.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:31.715Z,1516647691.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:31.914Z,1516647691.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:32.304Z,1516647692.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:32.513Z,1516647692.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:32.724Z,1516647692.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:32.959Z,1516647692.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:33.129Z,1516647693.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:33.511Z,1516647693.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x31955 got:0x21050
2018-01-22T19:01:33.539Z,1516647693.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:33.755Z,1516647693.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:33.908Z,1516647693.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:34.321Z,1516647694.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:34.553Z,1516647694.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:34.728Z,1516647694.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:34.959Z,1516647694.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:35.109Z,1516647695.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:35.538Z,1516647695.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:35.755Z,1516647695.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:35.953Z,1516647695.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:36.340Z,1516647696.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:36.551Z,1516647696.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:36.708Z,1516647696.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x16921 got:0x20763
2018-01-22T19:01:36.744Z,1516647696.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:36.955Z,1516647696.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:37.112Z,1516647697.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:37.509Z,1516647697.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:37.751Z,1516647697.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:37.934Z,1516647697.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:38.313Z,1516647698.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:38.547Z,1516647698.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:38.715Z,1516647698.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:38.951Z,1516647698.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:39.136Z,1516647699.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:39.540Z,1516647699.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:39.747Z,1516647699.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:39.907Z,1516647699.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:40.316Z,1516647700.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:40.543Z,1516647700.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:40.715Z,1516647700.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:40.947Z,1516647700.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:41.137Z,1516647701.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:41.521Z,1516647701.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:41.743Z,1516647701.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:41.920Z,1516647701.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:42.334Z,1516647702.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:42.539Z,1516647702.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:42.726Z,1516647702.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:42.943Z,1516647702.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:43.111Z,1516647703.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:43.513Z,1516647703.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:43.739Z,1516647703.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:43.923Z,1516647703.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:44.341Z,1516647704.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:44.535Z,1516647704.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:44.724Z,1516647704.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:44.939Z,1516647704.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:45.127Z,1516647705.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:45.524Z,1516647705.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:45.735Z,1516647705.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:45.920Z,1516647705.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:46.306Z,1516647706.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:46.533Z,1516647706.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:46.721Z,1516647706.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:46.985Z,1516647706.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:47.120Z,1516647707.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:47.520Z,1516647707.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:47.779Z,1516647707.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:47.928Z,1516647707.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:48.322Z,1516647708.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:48.577Z,1516647708.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:48.713Z,1516647708.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:48.995Z,1516647708.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:49.114Z,1516647709.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:49.505Z,1516647709.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:49.791Z,1516647709.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:49.920Z,1516647709.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:50.315Z,1516647710.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:50.589Z,1516647710.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:50.717Z,1516647710.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:50.995Z,1516647710.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:51.120Z,1516647711.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:51.536Z,1516647711.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:51.793Z,1516647711.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:51.914Z,1516647711.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:52.321Z,1516647712.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:52.587Z,1516647712.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:52.993Z,1516647712.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:53.787Z,1516647713.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:54.583Z,1516647714.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:54.987Z,1516647714.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:55.585Z,1516647715.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:55.708Z,1516647715.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:55.783Z,1516647715.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:56.088Z,1516647716.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:56.488Z,1516647716.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:56.580Z,1516647716.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:56.888Z,1516647716.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:56.983Z,1516647716.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:57.273Z,1516647717.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:57.678Z,1516647717.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:57.779Z,1516647717.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:58.084Z,1516647718.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:58.484Z,1516647718.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:58.575Z,1516647718.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:58.889Z,1516647718.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:58.979Z,1516647718.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:01:59.292Z,1516647719.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:59.680Z,1516647719.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:01:59.775Z,1516647719.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:00.085Z,1516647720.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:00.474Z,1516647720.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:00.573Z,1516647720.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:00.879Z,1516647720.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:01.011Z,1516647721.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:01.288Z,1516647721.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:01.693Z,1516647721.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:01.807Z,1516647721.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:02.097Z,1516647722.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:02.477Z,1516647722.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:02.603Z,1516647722.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:02.878Z,1516647722.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:03.007Z,1516647723.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:03.270Z,1516647723.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:03.676Z,1516647723.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:03.803Z,1516647723.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:04.070Z,1516647724.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:04.477Z,1516647724.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:04.599Z,1516647724.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:04.882Z,1516647724.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:05.003Z,1516647725.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:05.285Z,1516647725.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:05.672Z,1516647725.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:05.799Z,1516647725.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:06.084Z,1516647726.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:06.473Z,1516647726.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:06.597Z,1516647726.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:06.882Z,1516647726.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:07.003Z,1516647727.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:07.283Z,1516647727.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:07.678Z,1516647727.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:07.799Z,1516647727.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:08.081Z,1516647728.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:08.515Z,1516647728.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:08.596Z,1516647728.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:08.878Z,1516647728.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:08.999Z,1516647728.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:09.279Z,1516647729.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:09.683Z,1516647729.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:09.797Z,1516647729.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:10.074Z,1516647730.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:10.484Z,1516647730.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:10.591Z,1516647730.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:10.882Z,1516647730.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:10.995Z,1516647730.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:11.280Z,1516647731.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:11.679Z,1516647731.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:11.791Z,1516647731.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:12.083Z,1516647732.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:12.481Z,1516647732.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:12.587Z,1516647732.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:12.875Z,1516647732.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:12.991Z,1516647732.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:13.284Z,1516647733.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:13.685Z,1516647733.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:13.787Z,1516647733.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:14.087Z,1516647734.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:14.484Z,1516647734.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:14.585Z,1516647734.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:14.881Z,1516647734.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:15.023Z,1516647735.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:15.274Z,1516647735.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:15.683Z,1516647735.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:15.819Z,1516647735.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:16.092Z,1516647736.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:16.484Z,1516647736.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:16.617Z,1516647736.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:16.893Z,1516647736.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:17.027Z,1516647737.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:17.286Z,1516647737.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:17.684Z,1516647737.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:17.823Z,1516647737.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:18.078Z,1516647738.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:18.475Z,1516647738.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:18.619Z,1516647738.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:18.884Z,1516647738.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:19.023Z,1516647739.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:19.284Z,1516647739.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:19.696Z,1516647739.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:19.819Z,1516647739.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:20.091Z,1516647740.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:20.486Z,1516647740.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:20.615Z,1516647740.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:20.882Z,1516647740.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:21.019Z,1516647741.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:21.281Z,1516647741.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:21.679Z,1516647741.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:21.815Z,1516647741.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:22.076Z,1516647742.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:22.500Z,1516647742.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:22.611Z,1516647742.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:22.894Z,1516647742.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:23.015Z,1516647743.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:23.288Z,1516647743.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:23.685Z,1516647743.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:23.811Z,1516647743.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:24.087Z,1516647744.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:24.486Z,1516647744.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:24.607Z,1516647744.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:24.886Z,1516647744.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:25.011Z,1516647745.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:25.288Z,1516647745.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:25.695Z,1516647745.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:25.807Z,1516647745.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:26.091Z,1516647746.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:26.489Z,1516647746.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:26.603Z,1516647746.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:26.879Z,1516647746.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:27.007Z,1516647747.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:27.289Z,1516647747.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:27.688Z,1516647747.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:27.803Z,1516647747.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:28.072Z,1516647748.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:28.477Z,1516647748.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:28.601Z,1516647748.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:28.882Z,1516647748.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:29.047Z,1516647749.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:29.285Z,1516647749.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:29.674Z,1516647749.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:29.845Z,1516647749.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:30.073Z,1516647750.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:30.474Z,1516647750.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:30.641Z,1516647750.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:30.898Z,1516647750.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:31.071Z,1516647751.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:31.290Z,1516647751.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:31.700Z,1516647751.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:31.867Z,1516647751.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:32.105Z,1516647752.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:32.489Z,1516647752.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:32.663Z,1516647752.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:32.904Z,1516647752.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:33.067Z,1516647753.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:33.309Z,1516647753.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:33.690Z,1516647753.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:33.863Z,1516647753.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:34.095Z,1516647754.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:34.483Z,1516647754.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:34.659Z,1516647754.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:34.908Z,1516647754.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:35.063Z,1516647755.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:35.284Z,1516647755.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:35.702Z,1516647755.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:35.861Z,1516647755.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:36.092Z,1516647756.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:36.500Z,1516647756.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:36.655Z,1516647756.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:36.904Z,1516647756.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:37.059Z,1516647757.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:37.295Z,1516647757.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:37.670Z,1516647757.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:37.855Z,1516647757.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:38.072Z,1516647758.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:38.500Z,1516647758.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:38.651Z,1516647758.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:38.912Z,1516647758.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:39.055Z,1516647759.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:39.288Z,1516647759.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:39.676Z,1516647759.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:39.852Z,1516647759.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:40.096Z,1516647760.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:40.508Z,1516647760.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:40.647Z,1516647760.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:40.900Z,1516647760.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:41.051Z,1516647761.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:41.339Z,1516647761.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:41.696Z,1516647761.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:41.847Z,1516647761.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:42.087Z,1516647762.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:42.484Z,1516647762.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:42.648Z,1516647762.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:42.884Z,1516647762.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:43.070Z,1516647763.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:43.287Z,1516647763.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:43.688Z,1516647763.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:43.863Z,1516647763.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:44.096Z,1516647764.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:44.488Z,1516647764.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:44.661Z,1516647764.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:44.892Z,1516647764.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:45.075Z,1516647765.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:45.288Z,1516647765.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:45.672Z,1516647765.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:45.871Z,1516647765.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:46.076Z,1516647766.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:46.477Z,1516647766.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:46.671Z,1516647766.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:46.901Z,1516647766.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:47.075Z,1516647767.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:47.281Z,1516647767.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:47.676Z,1516647767.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:47.871Z,1516647767.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:48.076Z,1516647768.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:48.502Z,1516647768.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:48.667Z,1516647768.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:48.900Z,1516647768.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:49.071Z,1516647769.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:49.286Z,1516647769.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:49.673Z,1516647769.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:49.867Z,1516647769.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:50.109Z,1516647770.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:50.478Z,1516647770.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:50.663Z,1516647770.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:50.909Z,1516647770.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:51.067Z,1516647771.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:51.277Z,1516647771.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:51.676Z,1516647771.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:51.679Z,1516647771.679 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:02:51.679Z,1516647771.679 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:02:51.679Z,1516647771.679 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:02:51.679Z,1516647771.679 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:02:51.863Z,1516647771.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:52.074Z,1516647772.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:52.081Z,1516647772.081 [Default:CheckIn:D] Stopped
2018-01-22T19:02:52.081Z,1516647772.081 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:02:52.510Z,1516647772.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:52.513Z,1516647772.513 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.456543 min 
2018-01-22T19:02:52.513Z,1516647772.513 [Default:CheckIn:E] Stopped
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn] Stopped
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn](INFO): Running loop #5
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn] Running Loop=5
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:02:52.514Z,1516647772.514 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:02:52.659Z,1516647772.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:53.063Z,1516647773.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:53.859Z,1516647773.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:54.655Z,1516647774.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:55.059Z,1516647775.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:55.855Z,1516647775.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:56.064Z,1516647776.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:56.208Z,1516647776.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:56.530Z,1516647776.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:56.653Z,1516647776.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:56.944Z,1516647776.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:57.091Z,1516647777.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:57.335Z,1516647777.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:57.740Z,1516647777.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:57.887Z,1516647777.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:58.138Z,1516647778.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:58.540Z,1516647778.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:58.685Z,1516647778.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:58.932Z,1516647778.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:59.091Z,1516647779.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:02:59.336Z,1516647779.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:59.731Z,1516647779.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:02:59.887Z,1516647779.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:00.133Z,1516647780.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:00.565Z,1516647780.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:00.683Z,1516647780.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:00.938Z,1516647780.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:01.087Z,1516647781.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:01.340Z,1516647781.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:01.729Z,1516647781.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:01.883Z,1516647781.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:02.129Z,1516647782.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:02.540Z,1516647782.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:02.679Z,1516647782.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:02.930Z,1516647782.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:03.083Z,1516647783.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:03.331Z,1516647783.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:03.331Z,1516647783.331 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-01-22T19:03:03.331Z,1516647783.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:03:03.333Z,1516647783.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:03.333Z,1516647783.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-01-22T19:03:03.333Z,1516647783.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:03:03.335Z,1516647783.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:03.335Z,1516647783.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-01-22T19:03:03.335Z,1516647783.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:03:03.355Z,1516647783.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:03:03.355Z,1516647783.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:03:03.355Z,1516647783.355 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:03:03.766Z,1516647783.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:03:03.767Z,1516647783.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-01-22T19:03:03.767Z,1516647783.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:03:03.767Z,1516647783.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-01-22T19:03:03.768Z,1516647783.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:03:03.768Z,1516647783.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-01-22T19:03:03.879Z,1516647783.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:04.147Z,1516647784.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:03:04.147Z,1516647784.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:03:04.147Z,1516647784.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:03:04.148Z,1516647784.148 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:03:04.148Z,1516647784.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:03:04.148Z,1516647784.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:03:04.149Z,1516647784.149 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:03:04.149Z,1516647784.149 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:03:04.149Z,1516647784.149 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:03:04.540Z,1516647784.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:04.675Z,1516647784.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:04.936Z,1516647784.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:05.079Z,1516647785.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:05.344Z,1516647785.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:05.734Z,1516647785.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:05.875Z,1516647785.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:06.136Z,1516647786.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:06.541Z,1516647786.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:06.671Z,1516647786.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:06.949Z,1516647786.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:07.075Z,1516647787.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:07.343Z,1516647787.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:07.740Z,1516647787.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:07.871Z,1516647787.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:08.138Z,1516647788.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:08.544Z,1516647788.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:08.667Z,1516647788.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:08.949Z,1516647788.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:09.071Z,1516647789.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:09.340Z,1516647789.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:09.750Z,1516647789.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:09.867Z,1516647789.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:10.149Z,1516647790.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:10.543Z,1516647790.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:10.665Z,1516647790.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:10.939Z,1516647790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:11.103Z,1516647791.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:11.344Z,1516647791.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:11.740Z,1516647791.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:11.899Z,1516647791.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:12.140Z,1516647792.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:12.551Z,1516647792.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:12.697Z,1516647792.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:12.945Z,1516647792.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:13.107Z,1516647793.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:13.348Z,1516647793.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:13.743Z,1516647793.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:13.903Z,1516647793.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:14.140Z,1516647794.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:14.552Z,1516647794.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:14.699Z,1516647794.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:14.948Z,1516647794.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:15.103Z,1516647795.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:15.341Z,1516647795.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:15.741Z,1516647795.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:15.899Z,1516647795.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:16.143Z,1516647796.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:16.552Z,1516647796.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:16.695Z,1516647796.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:16.947Z,1516647796.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:17.099Z,1516647797.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:17.351Z,1516647797.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:17.740Z,1516647797.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:17.895Z,1516647797.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:18.140Z,1516647798.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:18.544Z,1516647798.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:18.691Z,1516647798.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:18.945Z,1516647798.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:19.095Z,1516647799.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:19.349Z,1516647799.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:19.743Z,1516647799.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:19.891Z,1516647799.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:20.140Z,1516647800.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:20.541Z,1516647800.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:20.687Z,1516647800.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:20.948Z,1516647800.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:21.091Z,1516647801.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:21.337Z,1516647801.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:21.740Z,1516647801.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:21.887Z,1516647801.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:22.135Z,1516647802.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:22.541Z,1516647802.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:22.683Z,1516647802.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:22.945Z,1516647802.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:23.087Z,1516647803.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:23.351Z,1516647803.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:23.744Z,1516647803.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:23.884Z,1516647803.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:24.144Z,1516647804.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:24.549Z,1516647804.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:24.681Z,1516647804.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:24.951Z,1516647804.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:25.131Z,1516647805.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:25.345Z,1516647805.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:25.736Z,1516647805.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:25.927Z,1516647805.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:26.130Z,1516647806.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:26.548Z,1516647806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:26.724Z,1516647806.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:26.944Z,1516647806.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:27.127Z,1516647807.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:27.348Z,1516647807.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:27.731Z,1516647807.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:27.924Z,1516647807.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:28.140Z,1516647808.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:28.544Z,1516647808.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:28.719Z,1516647808.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:28.944Z,1516647808.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:29.123Z,1516647809.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:29.352Z,1516647809.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:29.736Z,1516647809.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:29.921Z,1516647809.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:30.138Z,1516647810.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:30.548Z,1516647810.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:30.715Z,1516647810.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:30.945Z,1516647810.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:31.119Z,1516647811.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:31.341Z,1516647811.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:31.740Z,1516647811.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:31.915Z,1516647811.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:32.135Z,1516647812.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:32.552Z,1516647812.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:32.711Z,1516647812.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:32.950Z,1516647812.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:33.115Z,1516647813.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:33.345Z,1516647813.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:33.740Z,1516647813.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:33.911Z,1516647813.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:34.148Z,1516647814.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:34.553Z,1516647814.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:34.707Z,1516647814.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:34.954Z,1516647814.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:35.111Z,1516647815.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:35.350Z,1516647815.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:35.745Z,1516647815.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:35.907Z,1516647815.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:36.144Z,1516647816.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:36.551Z,1516647816.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:36.703Z,1516647816.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:36.950Z,1516647816.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:37.107Z,1516647817.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:37.348Z,1516647817.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:37.733Z,1516647817.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:37.903Z,1516647817.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:38.132Z,1516647818.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:38.550Z,1516647818.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:38.701Z,1516647818.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:38.959Z,1516647818.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:39.151Z,1516647819.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:39.359Z,1516647819.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:39.740Z,1516647819.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:39.947Z,1516647819.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:40.140Z,1516647820.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:40.542Z,1516647820.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:40.745Z,1516647820.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:40.944Z,1516647820.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:41.151Z,1516647821.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:41.348Z,1516647821.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:41.369Z,1516647821.369 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:03:41.369Z,1516647821.369 [BPC1] No Fault, FailCount= 10
2018-01-22T19:03:41.792Z,1516647821.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:41.947Z,1516647821.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:42.139Z,1516647822.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:42.548Z,1516647822.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:42.743Z,1516647822.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:42.946Z,1516647822.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:43.147Z,1516647823.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:43.344Z,1516647823.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:43.750Z,1516647823.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:43.943Z,1516647823.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:44.148Z,1516647824.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:44.555Z,1516647824.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:44.739Z,1516647824.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:44.967Z,1516647824.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:45.143Z,1516647825.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:45.347Z,1516647825.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:45.747Z,1516647825.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:45.939Z,1516647825.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:46.142Z,1516647826.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:46.546Z,1516647826.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:46.735Z,1516647826.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:46.960Z,1516647826.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:47.139Z,1516647827.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:47.351Z,1516647827.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:47.738Z,1516647827.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:47.935Z,1516647827.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:48.145Z,1516647828.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:48.548Z,1516647828.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:48.733Z,1516647828.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:48.946Z,1516647828.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:49.139Z,1516647829.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:49.349Z,1516647829.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:49.752Z,1516647829.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:49.935Z,1516647829.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:50.126Z,1516647830.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:50.531Z,1516647830.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:50.731Z,1516647830.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:50.943Z,1516647830.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:51.135Z,1516647831.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:51.325Z,1516647831.325 [PNI_TCM](ERROR): CRC does not match. Expected:0x16567 got:0x6593
2018-01-22T19:03:51.356Z,1516647831.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:51.753Z,1516647831.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:51.931Z,1516647831.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:52.153Z,1516647832.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:52.561Z,1516647832.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:52.729Z,1516647832.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:53.171Z,1516647833.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:53.967Z,1516647833.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:54.765Z,1516647834.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:55.192Z,1516647835.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:55.774Z,1516647835.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:55.903Z,1516647835.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:55.987Z,1516647835.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:56.260Z,1516647836.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:56.664Z,1516647836.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:56.783Z,1516647836.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:57.067Z,1516647837.067 [BPC1](INFO): Initialized
2018-01-22T19:03:57.076Z,1516647837.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:57.187Z,1516647837.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:57.436Z,1516647837.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:57.836Z,1516647837.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:57.983Z,1516647837.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:58.235Z,1516647838.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:58.660Z,1516647838.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:58.779Z,1516647838.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:59.072Z,1516647839.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:59.183Z,1516647839.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:03:59.446Z,1516647839.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:59.834Z,1516647839.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:03:59.979Z,1516647839.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:00.238Z,1516647840.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:00.636Z,1516647840.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:00.775Z,1516647840.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:01.048Z,1516647841.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:01.179Z,1516647841.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:01.444Z,1516647841.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:01.842Z,1516647841.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:01.975Z,1516647841.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:02.245Z,1516647842.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:02.647Z,1516647842.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:02.771Z,1516647842.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:03.038Z,1516647843.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:03.175Z,1516647843.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:03.443Z,1516647843.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:03.841Z,1516647843.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:03.971Z,1516647843.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:04.240Z,1516647844.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:04.654Z,1516647844.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:04.767Z,1516647844.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:05.046Z,1516647845.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:05.171Z,1516647845.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:05.440Z,1516647845.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:05.846Z,1516647845.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:05.967Z,1516647845.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:06.244Z,1516647846.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:06.639Z,1516647846.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:06.770Z,1516647846.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:07.045Z,1516647847.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:07.191Z,1516647847.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:07.442Z,1516647847.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:07.847Z,1516647847.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:07.987Z,1516647847.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:08.250Z,1516647848.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:08.655Z,1516647848.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:08.785Z,1516647848.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:09.039Z,1516647849.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:09.195Z,1516647849.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:09.447Z,1516647849.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:09.854Z,1516647849.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:09.991Z,1516647849.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:10.239Z,1516647850.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:10.656Z,1516647850.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:10.788Z,1516647850.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:11.066Z,1516647851.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:11.191Z,1516647851.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:11.449Z,1516647851.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:11.839Z,1516647851.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:11.987Z,1516647851.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:12.245Z,1516647852.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:12.639Z,1516647852.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:12.783Z,1516647852.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:13.047Z,1516647853.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:13.187Z,1516647853.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:13.447Z,1516647853.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:13.850Z,1516647853.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:13.983Z,1516647853.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:14.252Z,1516647854.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:14.656Z,1516647854.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:14.779Z,1516647854.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:15.035Z,1516647855.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:15.183Z,1516647855.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:15.439Z,1516647855.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:15.846Z,1516647855.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:15.979Z,1516647855.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:16.239Z,1516647856.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:16.660Z,1516647856.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:16.775Z,1516647856.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:17.111Z,1516647857.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:17.179Z,1516647857.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:17.448Z,1516647857.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:17.838Z,1516647857.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:17.975Z,1516647857.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:18.249Z,1516647858.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:18.639Z,1516647858.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:18.773Z,1516647858.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:19.039Z,1516647859.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:19.179Z,1516647859.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:19.442Z,1516647859.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:19.851Z,1516647859.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:19.975Z,1516647859.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:20.252Z,1516647860.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:20.645Z,1516647860.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:20.773Z,1516647860.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:21.039Z,1516647861.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:21.215Z,1516647861.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:21.439Z,1516647861.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:21.844Z,1516647861.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:22.011Z,1516647862.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:22.249Z,1516647862.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:22.652Z,1516647862.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:22.809Z,1516647862.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:23.061Z,1516647863.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:23.215Z,1516647863.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:23.452Z,1516647863.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:23.840Z,1516647863.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:24.011Z,1516647864.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:24.232Z,1516647864.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:24.654Z,1516647864.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:24.807Z,1516647864.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:25.054Z,1516647865.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:25.211Z,1516647865.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:25.460Z,1516647865.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:25.836Z,1516647865.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:26.007Z,1516647866.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:26.235Z,1516647866.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:26.655Z,1516647866.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:26.803Z,1516647866.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:27.051Z,1516647867.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:27.207Z,1516647867.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:27.457Z,1516647867.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:27.861Z,1516647867.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:28.003Z,1516647868.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:28.255Z,1516647868.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:28.662Z,1516647868.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:28.799Z,1516647868.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:29.063Z,1516647869.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:29.203Z,1516647869.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:29.450Z,1516647869.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:29.833Z,1516647869.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:29.999Z,1516647869.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:30.236Z,1516647870.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:30.657Z,1516647870.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:30.797Z,1516647870.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:31.054Z,1516647871.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:31.203Z,1516647871.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:31.459Z,1516647871.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:31.839Z,1516647871.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:31.999Z,1516647871.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:32.239Z,1516647872.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:32.652Z,1516647872.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:32.795Z,1516647872.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:33.046Z,1516647873.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:33.199Z,1516647873.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:33.448Z,1516647873.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:33.848Z,1516647873.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:33.995Z,1516647873.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:34.241Z,1516647874.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:34.647Z,1516647874.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:34.793Z,1516647874.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:35.054Z,1516647875.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:35.239Z,1516647875.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:35.449Z,1516647875.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:35.840Z,1516647875.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:36.035Z,1516647876.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:36.244Z,1516647876.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:36.649Z,1516647876.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:36.833Z,1516647876.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:37.054Z,1516647877.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:37.239Z,1516647877.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:37.452Z,1516647877.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:37.840Z,1516647877.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:38.035Z,1516647878.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:38.244Z,1516647878.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:38.649Z,1516647878.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:38.831Z,1516647878.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:39.053Z,1516647879.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:39.235Z,1516647879.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:39.448Z,1516647879.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:39.839Z,1516647879.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:40.031Z,1516647880.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:40.238Z,1516647880.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:40.656Z,1516647880.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:40.827Z,1516647880.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:41.058Z,1516647881.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:41.231Z,1516647881.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:41.456Z,1516647881.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:41.840Z,1516647881.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:42.027Z,1516647882.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:42.248Z,1516647882.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:42.652Z,1516647882.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:42.823Z,1516647882.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:43.049Z,1516647883.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:43.227Z,1516647883.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:43.460Z,1516647883.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:43.848Z,1516647883.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:44.023Z,1516647884.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:44.246Z,1516647884.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:44.649Z,1516647884.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:44.819Z,1516647884.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:45.052Z,1516647885.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:45.223Z,1516647885.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:45.460Z,1516647885.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:45.847Z,1516647885.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:46.021Z,1516647886.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:46.239Z,1516647886.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:46.660Z,1516647886.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:46.815Z,1516647886.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:47.053Z,1516647887.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:47.219Z,1516647887.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:47.455Z,1516647887.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:47.844Z,1516647887.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:48.015Z,1516647888.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:48.249Z,1516647888.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:48.651Z,1516647888.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:48.813Z,1516647888.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:49.060Z,1516647889.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:49.259Z,1516647889.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:49.452Z,1516647889.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:49.840Z,1516647889.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:50.055Z,1516647890.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:50.243Z,1516647890.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:50.652Z,1516647890.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:50.853Z,1516647890.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:51.060Z,1516647891.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:51.263Z,1516647891.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:51.447Z,1516647891.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:51.844Z,1516647891.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:52.059Z,1516647892.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:52.244Z,1516647892.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:52.660Z,1516647892.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:52.855Z,1516647892.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:53.259Z,1516647893.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:54.055Z,1516647894.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:54.851Z,1516647894.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:55.255Z,1516647895.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:55.902Z,1516647895.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:56.041Z,1516647896.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:56.051Z,1516647896.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:56.364Z,1516647896.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:56.783Z,1516647896.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:56.847Z,1516647896.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:57.176Z,1516647897.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:57.251Z,1516647897.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:57.576Z,1516647897.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:57.970Z,1516647897.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:58.047Z,1516647898.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:58.369Z,1516647898.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:58.769Z,1516647898.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:58.843Z,1516647898.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:59.171Z,1516647899.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:59.247Z,1516647899.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:04:59.565Z,1516647899.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:04:59.974Z,1516647899.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:00.043Z,1516647900.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:00.365Z,1516647900.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:00.776Z,1516647900.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:00.839Z,1516647900.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:01.174Z,1516647901.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:01.243Z,1516647901.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:01.576Z,1516647901.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:01.974Z,1516647901.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:02.039Z,1516647902.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:02.368Z,1516647902.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:02.771Z,1516647902.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:02.836Z,1516647902.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:03.172Z,1516647903.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:03.291Z,1516647903.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:03.572Z,1516647903.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:03.977Z,1516647903.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:04.087Z,1516647904.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:04.377Z,1516647904.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:04.777Z,1516647904.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:04.883Z,1516647904.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:05.180Z,1516647905.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:05.307Z,1516647905.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:05.577Z,1516647905.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:05.980Z,1516647905.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:06.103Z,1516647906.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:06.359Z,1516647906.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:06.786Z,1516647906.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:06.899Z,1516647906.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:07.185Z,1516647907.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:07.303Z,1516647907.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:07.593Z,1516647907.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:07.964Z,1516647907.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:08.099Z,1516647908.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:08.368Z,1516647908.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:08.784Z,1516647908.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:08.895Z,1516647908.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:09.167Z,1516647909.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:09.299Z,1516647909.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:09.568Z,1516647909.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:09.978Z,1516647909.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:10.095Z,1516647910.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:10.377Z,1516647910.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:10.769Z,1516647910.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:10.891Z,1516647910.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:11.171Z,1516647911.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:11.295Z,1516647911.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:11.566Z,1516647911.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:11.975Z,1516647911.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:12.091Z,1516647912.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:12.367Z,1516647912.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:12.771Z,1516647912.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:12.889Z,1516647912.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:13.173Z,1516647913.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:13.295Z,1516647913.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:13.576Z,1516647913.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:13.966Z,1516647913.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:14.091Z,1516647914.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:14.371Z,1516647914.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:14.772Z,1516647914.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:14.889Z,1516647914.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:15.175Z,1516647915.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:15.295Z,1516647915.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:15.567Z,1516647915.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:15.973Z,1516647915.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:16.092Z,1516647916.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:16.383Z,1516647916.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:16.784Z,1516647916.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:16.889Z,1516647916.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:17.181Z,1516647917.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:17.303Z,1516647917.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:17.578Z,1516647917.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:17.979Z,1516647917.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:18.099Z,1516647918.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:18.384Z,1516647918.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:18.779Z,1516647918.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:18.897Z,1516647918.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:19.196Z,1516647919.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:19.319Z,1516647919.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:19.582Z,1516647919.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:19.984Z,1516647919.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:20.115Z,1516647920.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:20.359Z,1516647920.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:20.768Z,1516647920.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:20.911Z,1516647920.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:21.168Z,1516647921.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:21.315Z,1516647921.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:21.564Z,1516647921.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:21.986Z,1516647921.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:22.111Z,1516647922.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:22.374Z,1516647922.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:22.773Z,1516647922.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:22.907Z,1516647922.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:23.180Z,1516647923.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:23.311Z,1516647923.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:23.568Z,1516647923.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:23.969Z,1516647923.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:24.107Z,1516647924.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:24.372Z,1516647924.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:24.777Z,1516647924.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:24.903Z,1516647924.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:25.186Z,1516647925.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:25.307Z,1516647925.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:25.584Z,1516647925.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:25.974Z,1516647925.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:26.103Z,1516647926.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:26.374Z,1516647926.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:26.771Z,1516647926.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:26.901Z,1516647926.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:27.174Z,1516647927.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:27.307Z,1516647927.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:27.569Z,1516647927.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:27.978Z,1516647927.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:28.105Z,1516647928.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:28.380Z,1516647928.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:28.784Z,1516647928.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:28.899Z,1516647928.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:29.186Z,1516647929.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:29.303Z,1516647929.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:29.572Z,1516647929.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:29.972Z,1516647929.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:30.099Z,1516647930.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:30.375Z,1516647930.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:30.776Z,1516647930.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:30.899Z,1516647930.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:31.180Z,1516647931.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:31.327Z,1516647931.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:31.589Z,1516647931.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:31.972Z,1516647931.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:32.123Z,1516647932.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:32.367Z,1516647932.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:32.776Z,1516647932.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:32.921Z,1516647932.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:33.172Z,1516647933.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:33.327Z,1516647933.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:33.572Z,1516647933.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:33.977Z,1516647933.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:34.124Z,1516647934.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:34.380Z,1516647934.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:34.777Z,1516647934.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:34.919Z,1516647934.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:35.170Z,1516647935.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:35.323Z,1516647935.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:35.568Z,1516647935.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:35.968Z,1516647935.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:36.119Z,1516647936.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:36.376Z,1516647936.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:36.777Z,1516647936.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:36.915Z,1516647936.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:37.181Z,1516647937.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:37.319Z,1516647937.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:37.580Z,1516647937.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:37.972Z,1516647937.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:38.115Z,1516647938.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:38.372Z,1516647938.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:38.769Z,1516647938.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:38.911Z,1516647938.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:39.172Z,1516647939.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:39.315Z,1516647939.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:39.568Z,1516647939.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:39.977Z,1516647939.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:40.111Z,1516647940.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:40.381Z,1516647940.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:40.777Z,1516647940.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:40.907Z,1516647940.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:41.169Z,1516647941.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:41.311Z,1516647941.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:41.572Z,1516647941.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:41.972Z,1516647941.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:42.108Z,1516647942.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:42.376Z,1516647942.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:42.777Z,1516647942.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:42.905Z,1516647942.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:43.181Z,1516647943.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:43.311Z,1516647943.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:43.577Z,1516647943.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:43.590Z,1516647943.590 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:05:43.972Z,1516647943.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:44.107Z,1516647944.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:44.372Z,1516647944.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:44.789Z,1516647944.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:44.905Z,1516647944.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:45.181Z,1516647945.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:45.353Z,1516647945.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:45.578Z,1516647945.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:45.979Z,1516647945.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:46.148Z,1516647946.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:46.372Z,1516647946.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:46.778Z,1516647946.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:46.944Z,1516647946.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:47.181Z,1516647947.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:47.347Z,1516647947.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:47.578Z,1516647947.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:47.968Z,1516647947.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:48.143Z,1516647948.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:48.376Z,1516647948.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:48.389Z,1516647948.389 [CBIT](INFO): Clearing failed state for component DropWeight
2018-01-22T19:05:48.389Z,1516647948.389 [DropWeight] No Fault, FailCount= 1
2018-01-22T19:05:48.777Z,1516647948.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:48.939Z,1516647948.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:49.181Z,1516647949.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:49.343Z,1516647949.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:49.586Z,1516647949.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:49.978Z,1516647949.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:50.139Z,1516647950.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:50.373Z,1516647950.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:50.781Z,1516647950.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:50.935Z,1516647950.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:51.182Z,1516647951.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:51.339Z,1516647951.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:51.582Z,1516647951.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:51.980Z,1516647951.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:52.135Z,1516647952.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:52.372Z,1516647952.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:52.783Z,1516647952.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:52.931Z,1516647952.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:53.335Z,1516647953.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:54.131Z,1516647954.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:54.927Z,1516647954.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:55.331Z,1516647955.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:56.050Z,1516647956.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:56.127Z,1516647956.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:56.200Z,1516647956.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:56.533Z,1516647956.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:56.923Z,1516647956.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:56.946Z,1516647956.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:57.327Z,1516647957.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:57.343Z,1516647957.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:57.745Z,1516647957.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:58.123Z,1516647958.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:58.157Z,1516647958.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:58.545Z,1516647958.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:58.921Z,1516647958.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:58.989Z,1516647958.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:59.320Z,1516647959.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:05:59.415Z,1516647959.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:05:59.724Z,1516647959.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:00.148Z,1516647960.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:00.211Z,1516647960.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:00.548Z,1516647960.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:00.997Z,1516647960.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:01.007Z,1516647961.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:01.348Z,1516647961.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:01.423Z,1516647961.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:01.724Z,1516647961.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:02.132Z,1516647962.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:02.219Z,1516647962.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:02.532Z,1516647962.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:02.946Z,1516647962.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:03.015Z,1516647963.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:03.345Z,1516647963.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:03.419Z,1516647963.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:03.744Z,1516647963.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:04.135Z,1516647964.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:04.215Z,1516647964.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:04.534Z,1516647964.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:04.534Z,1516647964.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-01-22T19:06:04.534Z,1516647964.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:06:04.540Z,1516647964.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:04.540Z,1516647964.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-01-22T19:06:04.540Z,1516647964.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:06:04.542Z,1516647964.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:04.542Z,1516647964.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-01-22T19:06:04.542Z,1516647964.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:06:04.593Z,1516647964.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:06:04.594Z,1516647964.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:06:04.603Z,1516647964.603 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:06:04.958Z,1516647964.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:06:04.958Z,1516647964.958 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-01-22T19:06:04.959Z,1516647964.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:06:04.959Z,1516647964.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-01-22T19:06:04.959Z,1516647964.959 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:06:04.959Z,1516647964.959 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-01-22T19:06:05.011Z,1516647965.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:05.323Z,1516647965.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:06:05.324Z,1516647965.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:06:05.324Z,1516647965.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:06:05.324Z,1516647965.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:06:05.325Z,1516647965.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:06:05.325Z,1516647965.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:06:05.325Z,1516647965.325 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:06:05.326Z,1516647965.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:06:05.326Z,1516647965.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:06:05.415Z,1516647965.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:05.728Z,1516647965.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:06.150Z,1516647966.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:06.211Z,1516647966.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:06.557Z,1516647966.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:06.945Z,1516647966.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:07.007Z,1516647967.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:07.335Z,1516647967.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:07.411Z,1516647967.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:07.740Z,1516647967.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:08.149Z,1516647968.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:08.207Z,1516647968.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:08.524Z,1516647968.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:08.966Z,1516647968.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:09.003Z,1516647969.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:09.338Z,1516647969.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:09.407Z,1516647969.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:09.744Z,1516647969.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:10.135Z,1516647970.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:10.203Z,1516647970.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:10.536Z,1516647970.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:10.938Z,1516647970.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:10.999Z,1516647970.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:11.341Z,1516647971.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:11.403Z,1516647971.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:11.733Z,1516647971.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:12.152Z,1516647972.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:12.199Z,1516647972.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:12.541Z,1516647972.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:12.996Z,1516647972.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:12.000Z,1516647973.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:13.338Z,1516647973.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:13.447Z,1516647973.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:13.744Z,1516647973.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:14.140Z,1516647974.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:14.243Z,1516647974.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:14.538Z,1516647974.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:14.000Z,1516647975.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:15.039Z,1516647975.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:15.350Z,1516647975.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:15.443Z,1516647975.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:15.755Z,1516647975.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:16.124Z,1516647976.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:16.524Z,1516647976.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:16.928Z,1516647976.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:17.332Z,1516647977.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:17.732Z,1516647977.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:18.155Z,1516647978.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:18.554Z,1516647978.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:18.950Z,1516647978.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:19.323Z,1516647979.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:19.728Z,1516647979.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:20.129Z,1516647980.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:20.528Z,1516647980.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:20.955Z,1516647980.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:21.353Z,1516647981.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:21.755Z,1516647981.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:22.136Z,1516647982.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:22.227Z,1516647982.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:22.537Z,1516647982.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:22.940Z,1516647982.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:23.023Z,1516647983.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:23.341Z,1516647983.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:23.427Z,1516647983.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:23.730Z,1516647983.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:24.145Z,1516647984.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:24.223Z,1516647984.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:24.544Z,1516647984.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:24.940Z,1516647984.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:25.019Z,1516647985.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:25.338Z,1516647985.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:25.423Z,1516647985.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:25.739Z,1516647985.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:26.132Z,1516647986.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:26.219Z,1516647986.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:26.534Z,1516647986.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:26.997Z,1516647986.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:27.015Z,1516647987.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:27.346Z,1516647987.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:27.451Z,1516647987.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:27.746Z,1516647987.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:28.140Z,1516647988.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:28.247Z,1516647988.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:28.533Z,1516647988.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:28.942Z,1516647988.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:29.043Z,1516647989.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:29.344Z,1516647989.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:29.447Z,1516647989.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:29.723Z,1516647989.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:30.153Z,1516647990.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:30.243Z,1516647990.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:30.549Z,1516647990.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:30.934Z,1516647990.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:31.039Z,1516647991.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:31.349Z,1516647991.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:31.443Z,1516647991.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:31.732Z,1516647991.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:32.136Z,1516647992.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:32.534Z,1516647992.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:32.944Z,1516647992.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:33.344Z,1516647993.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:33.745Z,1516647993.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:34.136Z,1516647994.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:34.532Z,1516647994.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:34.931Z,1516647994.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:35.344Z,1516647995.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:35.736Z,1516647995.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:36.145Z,1516647996.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:36.545Z,1516647996.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:36.941Z,1516647996.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:37.336Z,1516647997.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:37.740Z,1516647997.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:38.140Z,1516647998.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:38.227Z,1516647998.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:38.532Z,1516647998.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:38.945Z,1516647998.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:39.023Z,1516647999.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:39.344Z,1516647999.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:39.427Z,1516647999.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:39.747Z,1516647999.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:40.139Z,1516648000.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:40.223Z,1516648000.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:40.532Z,1516648000.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:40.936Z,1516648000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:41.021Z,1516648001.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:41.344Z,1516648001.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:41.447Z,1516648001.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:41.739Z,1516648001.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:42.148Z,1516648002.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:42.243Z,1516648002.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:42.550Z,1516648002.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:42.944Z,1516648002.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:43.039Z,1516648003.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:43.336Z,1516648003.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:43.455Z,1516648003.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:43.740Z,1516648003.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:44.135Z,1516648004.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:44.540Z,1516648004.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:44.946Z,1516648004.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:45.345Z,1516648005.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:45.748Z,1516648005.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:46.136Z,1516648006.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:46.542Z,1516648006.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:46.944Z,1516648006.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:47.344Z,1516648007.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:47.733Z,1516648007.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:48.147Z,1516648008.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:48.546Z,1516648008.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:48.941Z,1516648008.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:49.337Z,1516648009.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:49.741Z,1516648009.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:50.140Z,1516648010.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:50.538Z,1516648010.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:50.953Z,1516648010.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:51.356Z,1516648011.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:51.744Z,1516648011.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:52.144Z,1516648012.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:52.540Z,1516648012.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:52.946Z,1516648012.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:56.198Z,1516648016.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:56.271Z,1516648016.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:56.342Z,1516648016.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:56.670Z,1516648016.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:57.068Z,1516648017.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:57.120Z,1516648017.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:57.470Z,1516648017.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:57.475Z,1516648017.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:06:57.863Z,1516648017.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:58.276Z,1516648018.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:58.745Z,1516648018.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:59.074Z,1516648019.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:59.476Z,1516648019.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:06:59.876Z,1516648019.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:00.261Z,1516648020.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:00.688Z,1516648020.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:01.080Z,1516648021.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:01.464Z,1516648021.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:01.878Z,1516648021.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:02.278Z,1516648022.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:02.734Z,1516648022.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:03.080Z,1516648023.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:03.468Z,1516648023.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:03.878Z,1516648023.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:04.282Z,1516648024.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:04.756Z,1516648024.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:05.062Z,1516648025.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:05.465Z,1516648025.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:05.870Z,1516648025.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:06.276Z,1516648026.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:06.671Z,1516648026.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:07.076Z,1516648027.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:07.472Z,1516648027.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:07.879Z,1516648027.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:08.278Z,1516648028.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:08.677Z,1516648028.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:09.118Z,1516648029.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:09.472Z,1516648029.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:09.879Z,1516648029.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:10.290Z,1516648030.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:10.339Z,1516648030.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:10.678Z,1516648030.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:11.120Z,1516648031.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:11.135Z,1516648031.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:11.476Z,1516648031.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:11.539Z,1516648031.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:11.888Z,1516648031.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:12.279Z,1516648032.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:12.751Z,1516648032.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:13.057Z,1516648033.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:13.479Z,1516648033.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:13.880Z,1516648033.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:14.282Z,1516648034.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:14.751Z,1516648034.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:15.064Z,1516648035.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:15.468Z,1516648035.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:15.895Z,1516648035.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:16.274Z,1516648036.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:16.670Z,1516648036.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:17.064Z,1516648037.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:17.472Z,1516648037.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:17.878Z,1516648037.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:18.277Z,1516648038.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:18.714Z,1516648038.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:19.070Z,1516648039.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:19.467Z,1516648039.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:19.884Z,1516648039.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:20.280Z,1516648040.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:20.676Z,1516648040.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:21.064Z,1516648041.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:21.464Z,1516648041.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:21.881Z,1516648041.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:22.277Z,1516648042.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:22.684Z,1516648042.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:23.143Z,1516648043.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:23.476Z,1516648043.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:23.887Z,1516648043.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:24.279Z,1516648044.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:24.343Z,1516648044.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:24.680Z,1516648044.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:25.128Z,1516648045.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:25.139Z,1516648045.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:25.459Z,1516648045.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:25.551Z,1516648045.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:07:25.876Z,1516648045.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:26.276Z,1516648046.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:26.676Z,1516648046.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:27.077Z,1516648047.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:27.464Z,1516648047.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:27.868Z,1516648047.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:28.276Z,1516648048.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:28.668Z,1516648048.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:29.085Z,1516648049.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:29.483Z,1516648049.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:29.887Z,1516648049.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:30.271Z,1516648050.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:30.656Z,1516648050.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:31.062Z,1516648051.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:31.468Z,1516648051.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:31.872Z,1516648051.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:32.270Z,1516648052.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:32.670Z,1516648052.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:33.078Z,1516648053.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:33.463Z,1516648053.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:33.863Z,1516648053.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:34.280Z,1516648054.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:34.664Z,1516648054.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:35.073Z,1516648055.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:35.483Z,1516648055.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:35.888Z,1516648055.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:36.269Z,1516648056.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:36.676Z,1516648056.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:37.141Z,1516648057.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:37.479Z,1516648057.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:37.870Z,1516648057.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:38.285Z,1516648058.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:38.724Z,1516648058.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:39.168Z,1516648059.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:39.494Z,1516648059.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:39.870Z,1516648059.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:40.268Z,1516648060.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:40.708Z,1516648060.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:41.116Z,1516648061.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:41.500Z,1516648061.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:41.889Z,1516648061.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:42.284Z,1516648062.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:42.697Z,1516648062.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:43.071Z,1516648063.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:43.508Z,1516648063.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:43.916Z,1516648063.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:44.313Z,1516648064.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:44.773Z,1516648064.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:45.116Z,1516648065.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:45.477Z,1516648065.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:45.892Z,1516648065.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:46.257Z,1516648066.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:46.692Z,1516648066.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:47.100Z,1516648067.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:47.480Z,1516648067.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:47.888Z,1516648067.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:48.266Z,1516648068.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:48.668Z,1516648068.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:49.076Z,1516648069.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:49.468Z,1516648069.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:49.876Z,1516648069.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:50.288Z,1516648070.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:50.688Z,1516648070.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:51.142Z,1516648071.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:51.456Z,1516648071.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:51.860Z,1516648071.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:52.256Z,1516648072.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:52.656Z,1516648072.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:52.660Z,1516648072.660 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:02:52.5Z
2018-01-22T19:07:52.660Z,1516648072.660 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:07:52.660Z,1516648072.660 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:07:53.137Z,1516648073.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:56.450Z,1516648076.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:56.539Z,1516648076.539 [DataOverHttps](INFO): Sending 95 bytes from file Logs/20180122T180533/Courier0020.lzma
2018-01-22T19:07:56.586Z,1516648076.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:56.925Z,1516648076.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:57.285Z,1516648077.285 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0020.lzma.bak
2018-01-22T19:07:57.285Z,1516648077.285 [DataOverHttps](INFO): SBD MOMSN=7750994
2018-01-22T19:07:57.354Z,1516648077.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:58.025Z,1516648078.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:07:58.164Z,1516648078.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:01.473Z,1516648081.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:01.616Z,1516648081.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:01.937Z,1516648081.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:02.350Z,1516648082.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:02.744Z,1516648082.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:03.160Z,1516648083.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:06.412Z,1516648086.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:06.503Z,1516648086.503 [DataOverHttps](INFO): Sending 127 bytes from file Logs/20180122T180533/Express0021.lzma
2018-01-22T19:08:06.560Z,1516648086.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:06.908Z,1516648086.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:07.261Z,1516648087.261 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0021.lzma.bak
2018-01-22T19:08:07.261Z,1516648087.261 [DataOverHttps](INFO): SBD MOMSN=7750996
2018-01-22T19:08:07.325Z,1516648087.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:07.909Z,1516648087.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:07.912Z,1516648087.912 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:08:07.912Z,1516648087.912 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:08:07.912Z,1516648087.912 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:08:08.116Z,1516648088.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:11.527Z,1516648091.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:11.676Z,1516648091.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:12.020Z,1516648092.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:12.424Z,1516648092.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:12.867Z,1516648092.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:13.234Z,1516648093.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:13.629Z,1516648093.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:14.036Z,1516648094.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:14.444Z,1516648094.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:14.873Z,1516648094.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:15.232Z,1516648095.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:15.612Z,1516648095.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:16.032Z,1516648096.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:16.445Z,1516648096.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:16.875Z,1516648096.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:17.224Z,1516648097.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:17.615Z,1516648097.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:18.024Z,1516648098.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:18.424Z,1516648098.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:18.816Z,1516648098.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:19.260Z,1516648099.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:19.629Z,1516648099.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:20.028Z,1516648100.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:20.423Z,1516648100.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:20.820Z,1516648100.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:21.235Z,1516648101.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:21.615Z,1516648101.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:22.032Z,1516648102.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:22.430Z,1516648102.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:22.887Z,1516648102.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:23.226Z,1516648103.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:23.620Z,1516648103.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:24.024Z,1516648104.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:24.430Z,1516648104.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:24.876Z,1516648104.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:25.244Z,1516648105.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:25.644Z,1516648105.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:26.040Z,1516648106.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:26.411Z,1516648106.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:26.886Z,1516648106.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:27.216Z,1516648107.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:27.620Z,1516648107.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:28.047Z,1516648108.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:28.444Z,1516648108.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:28.894Z,1516648108.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:29.212Z,1516648109.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:29.615Z,1516648109.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:30.043Z,1516648110.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:30.417Z,1516648110.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:30.811Z,1516648110.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:31.232Z,1516648111.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:31.632Z,1516648111.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:32.024Z,1516648112.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:32.419Z,1516648112.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:32.827Z,1516648112.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:33.247Z,1516648113.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:33.621Z,1516648113.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:34.040Z,1516648114.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:34.430Z,1516648114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:34.832Z,1516648114.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:35.236Z,1516648115.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:35.616Z,1516648115.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:36.042Z,1516648116.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:36.422Z,1516648116.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:36.897Z,1516648116.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:37.219Z,1516648117.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:37.628Z,1516648117.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:38.025Z,1516648118.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:38.424Z,1516648118.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:38.878Z,1516648118.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:39.217Z,1516648119.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:39.626Z,1516648119.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:40.035Z,1516648120.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:40.435Z,1516648120.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:40.888Z,1516648120.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:41.209Z,1516648121.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:41.608Z,1516648121.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:42.044Z,1516648122.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:42.440Z,1516648122.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:42.892Z,1516648122.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:43.216Z,1516648123.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:43.623Z,1516648123.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:44.024Z,1516648124.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:44.429Z,1516648124.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:44.824Z,1516648124.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:45.216Z,1516648125.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:45.620Z,1516648125.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:46.036Z,1516648126.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:46.429Z,1516648126.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:46.830Z,1516648126.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:47.273Z,1516648127.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:47.607Z,1516648127.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:48.036Z,1516648128.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:48.440Z,1516648128.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:48.834Z,1516648128.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:49.257Z,1516648129.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:49.616Z,1516648129.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:50.039Z,1516648130.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:50.437Z,1516648130.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:50.911Z,1516648130.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:51.216Z,1516648131.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:51.620Z,1516648131.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:52.024Z,1516648132.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:52.428Z,1516648132.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:52.869Z,1516648132.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:53.222Z,1516648133.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:53.620Z,1516648133.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:54.028Z,1516648134.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:54.425Z,1516648134.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:54.903Z,1516648134.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:55.225Z,1516648135.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:55.624Z,1516648135.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:56.030Z,1516648136.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:56.429Z,1516648136.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:56.885Z,1516648136.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:57.202Z,1516648137.202 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:08:57.202Z,1516648137.202 [BPC1] Communications Fault, FailCount= 1
2018-01-22T19:08:57.202Z,1516648137.202 [BPC1](ERROR): Communications Fault
2018-01-22T19:08:57.221Z,1516648137.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:57.247Z,1516648137.247 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:08:57.628Z,1516648137.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:58.033Z,1516648138.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:58.439Z,1516648138.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:58.452Z,1516648138.452 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:08:58.452Z,1516648138.452 [BPC1] No Fault, FailCount= 1
2018-01-22T19:08:58.941Z,1516648138.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:59.212Z,1516648139.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:08:59.607Z,1516648139.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:00.040Z,1516648140.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:00.440Z,1516648140.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:00.835Z,1516648140.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:01.285Z,1516648141.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:01.612Z,1516648141.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:02.037Z,1516648142.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:02.433Z,1516648142.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:02.835Z,1516648142.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:03.282Z,1516648143.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:03.616Z,1516648143.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:04.042Z,1516648144.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:04.417Z,1516648144.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:04.885Z,1516648144.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:05.212Z,1516648145.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:05.612Z,1516648145.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:05.612Z,1516648145.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-01-22T19:09:05.612Z,1516648145.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:09:05.614Z,1516648145.614 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:05.614Z,1516648145.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-01-22T19:09:05.614Z,1516648145.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:09:05.620Z,1516648145.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:05.620Z,1516648145.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-01-22T19:09:05.620Z,1516648145.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:09:05.650Z,1516648145.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:09:05.650Z,1516648145.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:09:05.650Z,1516648145.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:09:06.040Z,1516648146.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:09:06.040Z,1516648146.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-01-22T19:09:06.040Z,1516648146.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:09:06.041Z,1516648146.041 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-01-22T19:09:06.041Z,1516648146.041 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:09:06.041Z,1516648146.041 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-01-22T19:09:06.421Z,1516648146.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:09:06.421Z,1516648146.421 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:09:06.422Z,1516648146.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:09:06.422Z,1516648146.422 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:09:06.423Z,1516648146.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:09:06.423Z,1516648146.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:09:06.423Z,1516648146.423 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:09:06.424Z,1516648146.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:09:06.424Z,1516648146.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:09:06.828Z,1516648146.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:07.236Z,1516648147.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:07.632Z,1516648147.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:08.013Z,1516648148.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:08.438Z,1516648148.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:11.704Z,1516648151.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:11.836Z,1516648151.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:12.206Z,1516648152.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:12.597Z,1516648152.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:13.016Z,1516648153.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:13.363Z,1516648153.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:13.780Z,1516648153.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:14.199Z,1516648154.199 [BPC1](INFO): Initialized
2018-01-22T19:09:14.208Z,1516648154.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:14.584Z,1516648154.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:14.988Z,1516648154.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:15.372Z,1516648155.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:15.772Z,1516648155.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:16.176Z,1516648156.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:16.568Z,1516648156.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:16.967Z,1516648156.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:17.384Z,1516648157.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:17.780Z,1516648157.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:18.180Z,1516648158.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:18.570Z,1516648158.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:18.983Z,1516648158.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:19.372Z,1516648159.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:19.776Z,1516648159.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:20.177Z,1516648160.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:20.580Z,1516648160.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:20.992Z,1516648160.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:21.372Z,1516648161.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:21.773Z,1516648161.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:22.180Z,1516648162.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:22.577Z,1516648162.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:22.990Z,1516648162.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:23.391Z,1516648163.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:23.783Z,1516648163.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:24.184Z,1516648164.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:24.580Z,1516648164.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:24.990Z,1516648164.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:25.386Z,1516648165.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:25.772Z,1516648165.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:26.186Z,1516648166.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:26.587Z,1516648166.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:27.048Z,1516648167.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:27.383Z,1516648167.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:27.776Z,1516648167.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:28.168Z,1516648168.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:28.564Z,1516648168.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:28.972Z,1516648168.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:29.399Z,1516648169.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:29.774Z,1516648169.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:30.177Z,1516648170.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:30.564Z,1516648170.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:30.976Z,1516648170.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:31.373Z,1516648171.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:31.780Z,1516648171.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:32.183Z,1516648172.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:32.589Z,1516648172.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:33.003Z,1516648173.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:33.373Z,1516648173.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:33.764Z,1516648173.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:34.164Z,1516648174.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:34.568Z,1516648174.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:35.013Z,1516648175.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:35.378Z,1516648175.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:35.776Z,1516648175.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:36.175Z,1516648176.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:36.568Z,1516648176.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:37.001Z,1516648177.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:37.371Z,1516648177.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:37.776Z,1516648177.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:38.192Z,1516648178.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:38.588Z,1516648178.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:39.003Z,1516648179.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:39.380Z,1516648179.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:39.785Z,1516648179.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:40.163Z,1516648180.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:40.590Z,1516648180.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:41.055Z,1516648181.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:41.387Z,1516648181.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:41.787Z,1516648181.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:42.189Z,1516648182.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:42.588Z,1516648182.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:42.960Z,1516648182.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:43.387Z,1516648183.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:43.768Z,1516648183.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:44.184Z,1516648184.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:44.585Z,1516648184.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:44.986Z,1516648184.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:45.392Z,1516648185.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:45.768Z,1516648185.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:46.162Z,1516648186.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:46.588Z,1516648186.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:47.022Z,1516648187.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:47.388Z,1516648187.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:47.789Z,1516648187.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:48.173Z,1516648188.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:48.574Z,1516648188.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:49.020Z,1516648189.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:49.373Z,1516648189.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:49.766Z,1516648189.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:50.174Z,1516648190.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:50.573Z,1516648190.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:51.026Z,1516648191.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:51.373Z,1516648191.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:51.765Z,1516648191.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:52.172Z,1516648192.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:52.568Z,1516648192.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:53.021Z,1516648193.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:53.382Z,1516648193.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:53.781Z,1516648193.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:54.188Z,1516648194.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:54.582Z,1516648194.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:55.021Z,1516648195.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:55.375Z,1516648195.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:55.767Z,1516648195.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:56.180Z,1516648196.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:56.580Z,1516648196.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:56.976Z,1516648196.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:57.381Z,1516648197.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:57.766Z,1516648197.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:58.172Z,1516648198.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:58.568Z,1516648198.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:58.976Z,1516648198.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:59.383Z,1516648199.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:09:59.780Z,1516648199.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:00.181Z,1516648200.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:00.579Z,1516648200.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:01.031Z,1516648201.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:01.378Z,1516648201.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:01.775Z,1516648201.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:02.180Z,1516648202.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:02.581Z,1516648202.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:03.047Z,1516648203.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:03.376Z,1516648203.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:03.779Z,1516648203.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:04.184Z,1516648204.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:04.584Z,1516648204.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:05.014Z,1516648205.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:05.392Z,1516648205.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:05.794Z,1516648205.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:06.195Z,1516648206.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:06.562Z,1516648206.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:07.045Z,1516648207.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:07.370Z,1516648207.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:07.772Z,1516648207.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:08.180Z,1516648208.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:08.599Z,1516648208.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:11.916Z,1516648211.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:12.051Z,1516648212.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:12.384Z,1516648212.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:12.778Z,1516648212.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:13.190Z,1516648213.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:13.613Z,1516648213.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:13.992Z,1516648213.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:14.383Z,1516648214.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:14.784Z,1516648214.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:15.181Z,1516648215.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:15.585Z,1516648215.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:15.985Z,1516648215.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:16.376Z,1516648216.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:16.778Z,1516648216.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:17.193Z,1516648217.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:17.592Z,1516648217.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:17.985Z,1516648217.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:18.379Z,1516648218.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:18.775Z,1516648218.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:19.198Z,1516648219.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:19.592Z,1516648219.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:19.996Z,1516648219.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:20.384Z,1516648220.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:20.779Z,1516648220.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:21.189Z,1516648221.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:21.592Z,1516648221.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:21.996Z,1516648221.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:22.379Z,1516648222.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:22.790Z,1516648222.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:23.195Z,1516648223.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:23.596Z,1516648223.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:23.994Z,1516648223.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:24.382Z,1516648224.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:24.787Z,1516648224.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:25.193Z,1516648225.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:25.594Z,1516648225.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:25.993Z,1516648225.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:26.380Z,1516648226.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:26.782Z,1516648226.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:27.189Z,1516648227.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:27.593Z,1516648227.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:27.996Z,1516648227.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:28.384Z,1516648228.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:28.781Z,1516648228.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:29.189Z,1516648229.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:29.593Z,1516648229.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:29.994Z,1516648229.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:30.382Z,1516648230.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:30.786Z,1516648230.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:31.194Z,1516648231.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:31.592Z,1516648231.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:31.999Z,1516648231.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:32.383Z,1516648232.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:32.790Z,1516648232.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:33.200Z,1516648233.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:33.600Z,1516648233.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:33.000Z,1516648234.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:34.385Z,1516648234.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:34.785Z,1516648234.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:35.196Z,1516648235.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:35.593Z,1516648235.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:35.989Z,1516648235.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:36.382Z,1516648236.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:36.783Z,1516648236.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:37.189Z,1516648237.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:37.600Z,1516648237.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:37.994Z,1516648237.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:38.385Z,1516648238.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:38.788Z,1516648238.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:39.193Z,1516648239.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:39.604Z,1516648239.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:39.993Z,1516648239.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:40.387Z,1516648240.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:40.784Z,1516648240.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:41.202Z,1516648241.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:41.601Z,1516648241.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:41.997Z,1516648241.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:42.386Z,1516648242.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:42.785Z,1516648242.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:43.190Z,1516648243.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:43.604Z,1516648243.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:44.004Z,1516648244.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:44.395Z,1516648244.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:44.790Z,1516648244.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:45.205Z,1516648245.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:45.589Z,1516648245.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:46.067Z,1516648246.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:46.396Z,1516648246.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:46.793Z,1516648246.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:47.200Z,1516648247.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:47.603Z,1516648247.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:48.002Z,1516648248.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:48.393Z,1516648248.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:48.795Z,1516648248.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:49.196Z,1516648249.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:49.589Z,1516648249.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x48759 got:0x7105
2018-01-22T19:10:49.616Z,1516648249.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:50.020Z,1516648250.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:50.400Z,1516648250.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:50.796Z,1516648250.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:51.171Z,1516648251.171 [PNI_TCM](ERROR): CRC does not match. Expected:0x8171 got:0x8131
2018-01-22T19:10:51.195Z,1516648251.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:51.585Z,1516648251.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:51.982Z,1516648251.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:52.390Z,1516648252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:52.793Z,1516648252.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:53.204Z,1516648253.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:53.590Z,1516648253.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:53.987Z,1516648253.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:54.396Z,1516648254.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:54.785Z,1516648254.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:55.200Z,1516648255.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:55.597Z,1516648255.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:55.999Z,1516648255.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:56.408Z,1516648256.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:56.785Z,1516648256.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:57.195Z,1516648257.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:57.596Z,1516648257.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:57.988Z,1516648257.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:58.404Z,1516648258.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:58.802Z,1516648258.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:59.208Z,1516648259.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:59.596Z,1516648259.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:10:59.994Z,1516648259.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:00.399Z,1516648260.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:00.801Z,1516648260.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:01.197Z,1516648261.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:01.608Z,1516648261.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:02.007Z,1516648262.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:02.396Z,1516648262.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:02.794Z,1516648262.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:03.208Z,1516648263.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:03.600Z,1516648263.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:04.003Z,1516648264.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:04.410Z,1516648264.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:04.798Z,1516648264.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:05.211Z,1516648265.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:05.600Z,1516648265.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:05.988Z,1516648265.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:06.383Z,1516648266.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:06.784Z,1516648266.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:07.193Z,1516648267.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:07.617Z,1516648267.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:07.988Z,1516648267.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:08.416Z,1516648268.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:08.795Z,1516648268.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:12.081Z,1516648272.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:12.216Z,1516648272.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:12.563Z,1516648272.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:12.976Z,1516648272.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:13.358Z,1516648273.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:13.764Z,1516648273.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:14.141Z,1516648274.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:14.548Z,1516648274.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:14.945Z,1516648274.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:15.367Z,1516648275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:15.768Z,1516648275.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:16.168Z,1516648276.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:16.549Z,1516648276.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:16.946Z,1516648276.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:17.356Z,1516648277.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:17.748Z,1516648277.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:18.147Z,1516648278.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:18.554Z,1516648278.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:18.953Z,1516648278.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:19.356Z,1516648279.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:19.756Z,1516648279.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:20.152Z,1516648280.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:20.548Z,1516648280.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:20.950Z,1516648280.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:21.366Z,1516648281.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:21.762Z,1516648281.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:22.161Z,1516648282.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:22.556Z,1516648282.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:22.955Z,1516648282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:23.354Z,1516648283.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:23.741Z,1516648283.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:24.145Z,1516648284.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:24.570Z,1516648284.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:24.966Z,1516648284.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:25.350Z,1516648285.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:25.743Z,1516648285.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:26.144Z,1516648286.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:26.544Z,1516648286.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:26.948Z,1516648286.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:27.371Z,1516648287.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:27.771Z,1516648287.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:28.160Z,1516648288.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:28.546Z,1516648288.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:28.945Z,1516648288.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:29.356Z,1516648289.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:29.752Z,1516648289.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:30.147Z,1516648290.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:30.508Z,1516648290.508 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T19:11:30.508Z,1516648290.509 [NAL9602] Data Fault, FailCount= 1
2018-01-22T19:11:30.509Z,1516648290.509 [NAL9602](ERROR): Data Fault
2018-01-22T19:11:30.559Z,1516648290.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:30.581Z,1516648290.581 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T19:11:30.908Z,1516648290.908 [NAL9602](INFO): Powering down
2018-01-22T19:11:30.952Z,1516648290.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:31.354Z,1516648291.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:31.760Z,1516648291.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:31.785Z,1516648291.785 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:11:31.785Z,1516648291.785 [NAL9602] No Fault, FailCount= 1
2018-01-22T19:11:32.155Z,1516648292.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:32.547Z,1516648292.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:32.947Z,1516648292.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:33.353Z,1516648293.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:33.747Z,1516648293.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:34.147Z,1516648294.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:34.555Z,1516648294.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:34.947Z,1516648294.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:35.347Z,1516648295.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:35.760Z,1516648295.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:36.148Z,1516648296.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:36.546Z,1516648296.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:36.957Z,1516648296.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:37.352Z,1516648297.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:37.760Z,1516648297.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:38.155Z,1516648298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:38.552Z,1516648298.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:38.952Z,1516648298.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:39.354Z,1516648299.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:39.752Z,1516648299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:40.147Z,1516648300.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:40.551Z,1516648300.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:40.947Z,1516648300.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:41.360Z,1516648301.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:41.756Z,1516648301.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:42.147Z,1516648302.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:42.547Z,1516648302.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:42.957Z,1516648302.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:43.352Z,1516648303.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:43.755Z,1516648303.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:44.159Z,1516648304.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:44.552Z,1516648304.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:44.947Z,1516648304.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:45.360Z,1516648305.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:45.756Z,1516648305.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:46.152Z,1516648306.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:46.551Z,1516648306.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:46.964Z,1516648306.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:47.360Z,1516648307.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:47.739Z,1516648307.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:48.166Z,1516648308.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:48.543Z,1516648308.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:48.944Z,1516648308.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:49.348Z,1516648309.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:49.764Z,1516648309.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:50.144Z,1516648310.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:50.543Z,1516648310.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:50.948Z,1516648310.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:51.344Z,1516648311.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:51.745Z,1516648311.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:52.141Z,1516648312.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:52.542Z,1516648312.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:52.942Z,1516648312.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:53.343Z,1516648313.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:53.743Z,1516648313.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:54.172Z,1516648314.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:54.544Z,1516648314.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:54.948Z,1516648314.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:55.344Z,1516648315.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:55.742Z,1516648315.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:56.142Z,1516648316.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:56.542Z,1516648316.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:56.948Z,1516648316.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:57.352Z,1516648317.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:57.748Z,1516648317.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:58.148Z,1516648318.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:58.548Z,1516648318.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:58.948Z,1516648318.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:59.352Z,1516648319.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:11:59.748Z,1516648319.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:00.148Z,1516648320.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:00.552Z,1516648320.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:00.912Z,1516648320.912 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:12:00.945Z,1516648320.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:01.372Z,1516648321.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:01.745Z,1516648321.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:02.152Z,1516648322.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:02.543Z,1516648322.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:02.947Z,1516648322.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:03.348Z,1516648323.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:03.752Z,1516648323.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:04.178Z,1516648324.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:04.548Z,1516648324.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:04.948Z,1516648324.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:05.347Z,1516648325.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:05.752Z,1516648325.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:06.145Z,1516648326.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:06.546Z,1516648326.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:06.546Z,1516648326.546 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-01-22T19:12:06.546Z,1516648326.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:12:06.552Z,1516648326.552 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:06.552Z,1516648326.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-01-22T19:12:06.553Z,1516648326.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:12:06.554Z,1516648326.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:06.559Z,1516648326.559 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-01-22T19:12:06.559Z,1516648326.559 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:12:06.581Z,1516648326.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:12:06.581Z,1516648326.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:12:06.581Z,1516648326.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:12:06.975Z,1516648326.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:12:06.975Z,1516648326.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-01-22T19:12:06.975Z,1516648326.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:12:06.975Z,1516648326.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-01-22T19:12:06.976Z,1516648326.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:12:06.976Z,1516648326.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-01-22T19:12:07.349Z,1516648327.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:12:07.350Z,1516648327.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:12:07.350Z,1516648327.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:12:07.351Z,1516648327.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:12:07.351Z,1516648327.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:12:07.351Z,1516648327.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:12:07.352Z,1516648327.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:12:07.352Z,1516648327.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:12:07.352Z,1516648327.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:12:07.756Z,1516648327.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:08.149Z,1516648328.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:08.548Z,1516648328.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:08.959Z,1516648328.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:12.243Z,1516648332.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:12.382Z,1516648332.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:12.677Z,1516648332.677 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:12:12.717Z,1516648332.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:13.119Z,1516648333.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:13.521Z,1516648333.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:13.920Z,1516648333.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:14.321Z,1516648334.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:14.715Z,1516648334.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:15.110Z,1516648335.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:15.523Z,1516648335.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:15.917Z,1516648335.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:16.317Z,1516648336.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:16.732Z,1516648336.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:17.134Z,1516648337.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:17.566Z,1516648337.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:17.904Z,1516648337.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:18.308Z,1516648338.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:18.704Z,1516648338.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:19.108Z,1516648339.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:19.577Z,1516648339.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:19.914Z,1516648339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:20.314Z,1516648340.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:20.708Z,1516648340.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:21.106Z,1516648341.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:21.506Z,1516648341.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:21.916Z,1516648341.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:22.306Z,1516648342.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:22.720Z,1516648342.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:23.120Z,1516648343.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:23.520Z,1516648343.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:23.916Z,1516648343.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:24.314Z,1516648344.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:24.713Z,1516648344.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:25.115Z,1516648345.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:25.529Z,1516648345.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:25.922Z,1516648345.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:26.320Z,1516648346.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:26.716Z,1516648346.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:27.116Z,1516648347.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:27.505Z,1516648347.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:27.914Z,1516648347.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:28.314Z,1516648348.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:28.716Z,1516648348.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:29.120Z,1516648349.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:29.521Z,1516648349.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:29.906Z,1516648349.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:30.310Z,1516648350.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:30.709Z,1516648350.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:31.117Z,1516648351.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:31.589Z,1516648351.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:31.922Z,1516648351.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:32.331Z,1516648352.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:32.704Z,1516648352.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:33.100Z,1516648353.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:33.554Z,1516648353.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:33.912Z,1516648353.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:34.304Z,1516648354.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:34.714Z,1516648354.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:35.114Z,1516648355.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:35.522Z,1516648355.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:35.911Z,1516648355.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:36.312Z,1516648356.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:36.716Z,1516648356.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:37.120Z,1516648357.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:37.539Z,1516648357.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:37.936Z,1516648357.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:38.334Z,1516648358.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:38.733Z,1516648358.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:39.136Z,1516648359.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:39.544Z,1516648359.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:39.912Z,1516648359.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:40.316Z,1516648360.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:40.748Z,1516648360.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:41.156Z,1516648361.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:41.532Z,1516648361.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:41.906Z,1516648361.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:42.339Z,1516648362.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:42.739Z,1516648362.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:43.118Z,1516648363.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:43.548Z,1516648363.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:43.936Z,1516648363.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:44.350Z,1516648364.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:44.733Z,1516648364.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:45.132Z,1516648365.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:45.613Z,1516648365.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:45.925Z,1516648365.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:46.339Z,1516648366.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:46.736Z,1516648366.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:47.135Z,1516648367.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:47.537Z,1516648367.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:47.909Z,1516648367.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:48.308Z,1516648368.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:48.708Z,1516648368.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:49.108Z,1516648369.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:49.537Z,1516648369.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:49.937Z,1516648369.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:50.328Z,1516648370.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:50.732Z,1516648370.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:51.104Z,1516648371.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:51.513Z,1516648371.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:51.915Z,1516648371.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:52.311Z,1516648372.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:52.717Z,1516648372.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:53.117Z,1516648373.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:53.522Z,1516648373.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:53.920Z,1516648373.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:54.311Z,1516648374.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:54.720Z,1516648374.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:55.121Z,1516648375.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:55.527Z,1516648375.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:55.932Z,1516648375.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:56.328Z,1516648376.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:56.713Z,1516648376.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:57.112Z,1516648377.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:57.522Z,1516648377.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:57.912Z,1516648377.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:58.299Z,1516648378.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:58.728Z,1516648378.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:59.129Z,1516648379.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:59.514Z,1516648379.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:12:59.915Z,1516648379.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:00.317Z,1516648380.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:00.708Z,1516648380.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:01.118Z,1516648381.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:01.525Z,1516648381.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:01.922Z,1516648381.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:02.323Z,1516648382.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:02.720Z,1516648382.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:03.112Z,1516648383.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:03.499Z,1516648383.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:03.900Z,1516648383.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:04.324Z,1516648384.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:04.728Z,1516648384.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:05.128Z,1516648385.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:05.531Z,1516648385.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:05.925Z,1516648385.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:06.328Z,1516648386.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:06.724Z,1516648386.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:07.104Z,1516648387.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:07.526Z,1516648387.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:07.933Z,1516648387.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:08.314Z,1516648388.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:08.317Z,1516648388.317 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:13:08.317Z,1516648388.317 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:13:08.317Z,1516648388.317 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:13:08.318Z,1516648388.318 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:13:08.706Z,1516648388.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:08.713Z,1516648388.713 [Default:CheckIn:D] Stopped
2018-01-22T19:13:08.713Z,1516648388.713 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:13:09.109Z,1516648389.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:09.115Z,1516648389.115 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.733748 min 
2018-01-22T19:13:09.115Z,1516648389.115 [Default:CheckIn:E] Stopped
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn] Stopped
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn](INFO): Running loop #6
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn] Running Loop=6
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:13:09.116Z,1516648389.116 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:13:12.383Z,1516648392.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:12.508Z,1516648392.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:12.858Z,1516648392.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:13.262Z,1516648393.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:13.662Z,1516648393.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:14.048Z,1516648394.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:14.444Z,1516648394.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:14.841Z,1516648394.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:15.248Z,1516648395.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:15.665Z,1516648395.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:16.058Z,1516648396.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:16.480Z,1516648396.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:16.856Z,1516648396.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:17.313Z,1516648397.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:17.648Z,1516648397.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:18.045Z,1516648398.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:18.443Z,1516648398.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:18.854Z,1516648398.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:19.333Z,1516648399.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:19.658Z,1516648399.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:20.046Z,1516648400.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:20.460Z,1516648400.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:20.853Z,1516648400.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:21.315Z,1516648401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:21.665Z,1516648401.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:22.057Z,1516648402.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:22.468Z,1516648402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:22.856Z,1516648402.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:23.306Z,1516648403.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:23.640Z,1516648403.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:24.041Z,1516648404.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:24.440Z,1516648404.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:24.866Z,1516648404.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:25.273Z,1516648405.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:25.664Z,1516648405.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:26.047Z,1516648406.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:26.459Z,1516648406.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:26.848Z,1516648406.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:27.256Z,1516648407.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:27.701Z,1516648407.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:28.061Z,1516648408.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:28.461Z,1516648408.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:28.859Z,1516648408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:29.249Z,1516648409.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:29.697Z,1516648409.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:30.068Z,1516648410.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:30.462Z,1516648410.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:30.862Z,1516648410.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:31.302Z,1516648411.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:31.648Z,1516648411.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:32.058Z,1516648412.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:32.454Z,1516648412.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:32.854Z,1516648412.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:33.303Z,1516648413.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:33.656Z,1516648413.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:34.048Z,1516648414.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:34.458Z,1516648414.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:34.852Z,1516648414.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:35.322Z,1516648415.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:35.661Z,1516648415.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:36.066Z,1516648416.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:36.456Z,1516648416.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:36.852Z,1516648416.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:37.241Z,1516648417.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:37.649Z,1516648417.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:38.054Z,1516648418.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:38.455Z,1516648418.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:38.855Z,1516648418.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:39.246Z,1516648419.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:39.652Z,1516648419.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:40.050Z,1516648420.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:40.447Z,1516648420.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:40.855Z,1516648420.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:41.254Z,1516648421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:41.705Z,1516648421.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:42.041Z,1516648422.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:42.445Z,1516648422.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:42.864Z,1516648422.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:43.266Z,1516648423.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:43.713Z,1516648423.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:44.049Z,1516648424.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:44.460Z,1516648424.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:44.868Z,1516648424.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:45.302Z,1516648425.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:45.653Z,1516648425.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:46.048Z,1516648426.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:46.450Z,1516648426.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:46.864Z,1516648426.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:47.269Z,1516648427.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:47.674Z,1516648427.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:48.063Z,1516648428.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:48.452Z,1516648428.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:48.852Z,1516648428.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:49.249Z,1516648429.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:49.655Z,1516648429.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:50.064Z,1516648430.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:50.457Z,1516648430.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:50.857Z,1516648430.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:51.247Z,1516648431.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:51.655Z,1516648431.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:52.052Z,1516648432.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:52.456Z,1516648432.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:52.856Z,1516648432.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:53.261Z,1516648433.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:53.663Z,1516648433.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:54.061Z,1516648434.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:54.448Z,1516648434.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:54.849Z,1516648434.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:55.259Z,1516648435.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:55.701Z,1516648435.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:56.061Z,1516648436.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:56.466Z,1516648436.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:56.862Z,1516648436.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:57.254Z,1516648437.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:57.711Z,1516648437.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:58.047Z,1516648438.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:58.441Z,1516648438.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:58.848Z,1516648438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:59.254Z,1516648439.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:13:59.668Z,1516648439.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:00.066Z,1516648440.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:00.456Z,1516648440.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:00.855Z,1516648440.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:01.240Z,1516648441.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:01.644Z,1516648441.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:02.076Z,1516648442.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:02.469Z,1516648442.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:02.866Z,1516648442.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:03.248Z,1516648443.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:03.650Z,1516648443.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:04.051Z,1516648444.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:04.449Z,1516648444.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:04.856Z,1516648444.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:05.260Z,1516648445.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:05.660Z,1516648445.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:06.072Z,1516648446.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:06.456Z,1516648446.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:06.857Z,1516648446.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:07.259Z,1516648447.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:07.657Z,1516648447.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:08.072Z,1516648448.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:08.466Z,1516648448.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:08.862Z,1516648448.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:09.261Z,1516648449.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:12.583Z,1516648452.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:12.719Z,1516648452.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:13.089Z,1516648453.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:13.492Z,1516648453.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:13.884Z,1516648453.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:14.263Z,1516648454.263 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:14:14.263Z,1516648454.263 [BPC1] Communications Fault, FailCount= 2
2018-01-22T19:14:14.263Z,1516648454.263 [BPC1](ERROR): Communications Fault
2018-01-22T19:14:14.276Z,1516648454.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:14.296Z,1516648454.296 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:14:14.668Z,1516648454.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:15.056Z,1516648455.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:15.479Z,1516648455.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:15.500Z,1516648455.500 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:14:15.500Z,1516648455.500 [BPC1] No Fault, FailCount= 2
2018-01-22T19:14:15.928Z,1516648455.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:16.288Z,1516648456.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:16.685Z,1516648456.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:17.089Z,1516648457.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:17.489Z,1516648457.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:17.864Z,1516648457.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:18.290Z,1516648458.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:18.668Z,1516648458.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:19.070Z,1516648459.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:19.469Z,1516648459.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:19.877Z,1516648459.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:20.269Z,1516648460.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:20.680Z,1516648460.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:21.068Z,1516648461.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:21.501Z,1516648461.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:21.873Z,1516648461.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:22.276Z,1516648462.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:22.677Z,1516648462.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:23.085Z,1516648463.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:23.460Z,1516648463.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:23.876Z,1516648463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:24.276Z,1516648464.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:24.660Z,1516648464.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:24.943Z,1516648464.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:25.082Z,1516648465.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:25.480Z,1516648465.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:25.742Z,1516648465.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:25.908Z,1516648465.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:26.147Z,1516648466.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:26.272Z,1516648466.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:26.667Z,1516648466.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:26.943Z,1516648466.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:27.064Z,1516648467.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:27.468Z,1516648467.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:27.741Z,1516648467.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:27.875Z,1516648467.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:28.147Z,1516648468.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:28.283Z,1516648468.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:28.676Z,1516648468.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:29.076Z,1516648469.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:29.464Z,1516648469.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:29.872Z,1516648469.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:30.276Z,1516648470.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:30.663Z,1516648470.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:31.095Z,1516648471.095 [BPC1](INFO): Initialized
2018-01-22T19:14:31.122Z,1516648471.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:31.488Z,1516648471.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:31.879Z,1516648471.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:32.273Z,1516648472.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:32.676Z,1516648472.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:33.072Z,1516648473.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:33.479Z,1516648473.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:33.876Z,1516648473.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:34.279Z,1516648474.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:34.679Z,1516648474.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:35.082Z,1516648475.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:35.536Z,1516648475.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:35.864Z,1516648475.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:36.260Z,1516648476.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:36.664Z,1516648476.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:37.074Z,1516648477.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:37.470Z,1516648477.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:37.872Z,1516648477.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:38.266Z,1516648478.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:38.672Z,1516648478.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:38.959Z,1516648478.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:39.065Z,1516648479.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:39.473Z,1516648479.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:39.758Z,1516648479.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:39.872Z,1516648479.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:40.171Z,1516648480.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:40.277Z,1516648480.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:40.678Z,1516648480.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:40.968Z,1516648480.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:41.083Z,1516648481.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:41.479Z,1516648481.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:41.763Z,1516648481.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:41.876Z,1516648481.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:42.167Z,1516648482.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:42.274Z,1516648482.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:42.668Z,1516648482.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:43.085Z,1516648483.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:43.483Z,1516648483.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:43.881Z,1516648483.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:44.280Z,1516648484.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:44.680Z,1516648484.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:45.055Z,1516648485.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:45.489Z,1516648485.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:45.861Z,1516648485.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:46.281Z,1516648486.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:46.683Z,1516648486.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:47.088Z,1516648487.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:47.474Z,1516648487.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:47.864Z,1516648487.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:48.265Z,1516648488.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:48.664Z,1516648488.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:49.076Z,1516648489.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:49.526Z,1516648489.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:49.884Z,1516648489.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:50.268Z,1516648490.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:50.684Z,1516648490.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:51.084Z,1516648491.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:51.459Z,1516648491.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:51.864Z,1516648491.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:52.270Z,1516648492.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:52.673Z,1516648492.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:52.983Z,1516648492.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:53.076Z,1516648493.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:53.463Z,1516648493.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:53.781Z,1516648493.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:53.867Z,1516648493.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:54.195Z,1516648494.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:54.266Z,1516648494.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:54.660Z,1516648494.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:54.991Z,1516648494.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:55.084Z,1516648495.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:55.498Z,1516648495.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:55.787Z,1516648495.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:55.878Z,1516648495.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:56.191Z,1516648496.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:14:56.268Z,1516648496.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:56.675Z,1516648496.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:57.051Z,1516648497.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:57.490Z,1516648497.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:57.864Z,1516648497.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:58.274Z,1516648498.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:58.688Z,1516648498.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:59.084Z,1516648499.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:59.496Z,1516648499.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:14:59.876Z,1516648499.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:00.268Z,1516648500.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:00.661Z,1516648500.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:01.069Z,1516648501.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:01.508Z,1516648501.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:01.870Z,1516648501.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:02.261Z,1516648502.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:02.668Z,1516648502.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:03.062Z,1516648503.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:03.547Z,1516648503.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:03.868Z,1516648503.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:04.273Z,1516648504.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:04.680Z,1516648504.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:05.084Z,1516648505.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:05.464Z,1516648505.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:05.880Z,1516648505.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:06.276Z,1516648506.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:06.664Z,1516648506.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:07.003Z,1516648507.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:07.089Z,1516648507.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:07.480Z,1516648507.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:07.480Z,1516648507.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-01-22T19:15:07.480Z,1516648507.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:15:07.482Z,1516648507.482 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:07.482Z,1516648507.482 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-01-22T19:15:07.482Z,1516648507.482 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:15:07.484Z,1516648507.484 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:07.484Z,1516648507.484 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-01-22T19:15:07.484Z,1516648507.484 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:15:07.530Z,1516648507.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:15:07.531Z,1516648507.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:15:07.531Z,1516648507.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:15:07.804Z,1516648507.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:07.898Z,1516648507.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:15:07.898Z,1516648507.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-01-22T19:15:07.915Z,1516648507.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:15:07.915Z,1516648507.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-01-22T19:15:07.915Z,1516648507.915 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:15:07.915Z,1516648507.915 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-01-22T19:15:08.211Z,1516648508.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:08.254Z,1516648508.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:15:08.275Z,1516648508.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:15:08.275Z,1516648508.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:15:08.275Z,1516648508.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:15:08.276Z,1516648508.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:15:08.276Z,1516648508.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:15:08.276Z,1516648508.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:15:08.277Z,1516648508.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:15:08.277Z,1516648508.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:15:08.659Z,1516648508.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:09.007Z,1516648509.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:09.081Z,1516648509.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:09.503Z,1516648509.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:09.803Z,1516648509.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:10.207Z,1516648510.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:12.690Z,1516648512.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:12.822Z,1516648512.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:13.172Z,1516648513.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:13.593Z,1516648513.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:13.960Z,1516648513.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:14.364Z,1516648514.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:14.762Z,1516648514.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:15.192Z,1516648515.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:15.575Z,1516648515.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:15.976Z,1516648515.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:16.376Z,1516648516.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:16.772Z,1516648516.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:17.156Z,1516648517.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:17.601Z,1516648517.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:17.962Z,1516648517.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:18.364Z,1516648518.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:18.768Z,1516648518.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:19.172Z,1516648519.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:19.566Z,1516648519.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:19.957Z,1516648519.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:20.357Z,1516648520.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:20.775Z,1516648520.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:21.174Z,1516648521.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:21.595Z,1516648521.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:21.970Z,1516648521.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:22.369Z,1516648522.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:22.766Z,1516648522.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:23.160Z,1516648523.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:23.560Z,1516648523.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:23.960Z,1516648523.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:24.376Z,1516648524.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:24.799Z,1516648524.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:25.168Z,1516648525.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:25.559Z,1516648525.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:25.973Z,1516648525.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:26.365Z,1516648526.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:26.764Z,1516648526.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:27.179Z,1516648527.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:27.579Z,1516648527.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:27.982Z,1516648527.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:28.366Z,1516648528.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:28.768Z,1516648528.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:29.184Z,1516648529.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:29.570Z,1516648529.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:29.952Z,1516648529.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:30.385Z,1516648530.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:30.762Z,1516648530.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:31.182Z,1516648531.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:31.616Z,1516648531.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:31.985Z,1516648531.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:32.363Z,1516648532.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:32.760Z,1516648532.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:33.172Z,1516648533.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:33.568Z,1516648533.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:33.998Z,1516648533.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:34.356Z,1516648534.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:34.759Z,1516648534.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:35.171Z,1516648535.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:35.557Z,1516648535.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:35.965Z,1516648535.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:36.379Z,1516648536.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:36.769Z,1516648536.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:37.182Z,1516648537.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:37.565Z,1516648537.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:37.972Z,1516648537.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:38.365Z,1516648538.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:38.748Z,1516648538.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:39.167Z,1516648539.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:39.575Z,1516648539.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:39.979Z,1516648539.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:40.362Z,1516648540.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:40.761Z,1516648540.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:41.158Z,1516648541.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:41.572Z,1516648541.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:41.962Z,1516648541.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:42.372Z,1516648542.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:42.766Z,1516648542.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:43.168Z,1516648543.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:43.577Z,1516648543.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:43.612Z,1516648543.612 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:15:43.962Z,1516648543.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:44.357Z,1516648544.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:44.771Z,1516648544.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:45.172Z,1516648545.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:45.608Z,1516648545.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:45.974Z,1516648545.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:46.364Z,1516648546.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:46.768Z,1516648546.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:46.839Z,1516648546.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:47.151Z,1516648547.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:47.549Z,1516648547.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:47.635Z,1516648547.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:47.956Z,1516648547.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:48.275Z,1516648548.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:48.379Z,1516648548.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:48.776Z,1516648548.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:49.071Z,1516648549.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:49.174Z,1516648549.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:49.560Z,1516648549.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:49.872Z,1516648549.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:49.984Z,1516648549.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:50.275Z,1516648550.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:15:50.358Z,1516648550.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:50.760Z,1516648550.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:51.168Z,1516648551.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:51.595Z,1516648551.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:51.974Z,1516648551.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:52.365Z,1516648552.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:52.765Z,1516648552.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:53.156Z,1516648553.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:53.584Z,1516648553.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:53.964Z,1516648553.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:54.374Z,1516648554.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:54.779Z,1516648554.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:55.178Z,1516648555.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:55.585Z,1516648555.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:55.953Z,1516648555.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:56.368Z,1516648556.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:56.752Z,1516648556.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:57.172Z,1516648557.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:57.594Z,1516648557.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:57.984Z,1516648557.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:58.351Z,1516648558.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:58.760Z,1516648558.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:59.160Z,1516648559.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:59.631Z,1516648559.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:15:59.955Z,1516648559.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:00.362Z,1516648560.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:00.762Z,1516648560.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:01.161Z,1516648561.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:01.564Z,1516648561.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:01.961Z,1516648561.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:02.355Z,1516648562.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:02.768Z,1516648562.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:03.165Z,1516648563.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:03.568Z,1516648563.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:03.976Z,1516648563.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:04.367Z,1516648564.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:04.762Z,1516648564.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:05.168Z,1516648565.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:05.608Z,1516648565.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:05.968Z,1516648565.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:06.363Z,1516648566.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:06.762Z,1516648566.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:07.161Z,1516648567.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:07.613Z,1516648567.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:07.972Z,1516648567.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:08.360Z,1516648568.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:08.768Z,1516648568.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:09.170Z,1516648569.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:09.617Z,1516648569.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:12.822Z,1516648572.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:12.939Z,1516648572.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:13.295Z,1516648573.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:13.693Z,1516648573.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:14.096Z,1516648574.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:14.504Z,1516648574.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:14.908Z,1516648574.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:15.304Z,1516648575.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:15.700Z,1516648575.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:16.097Z,1516648576.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:16.500Z,1516648576.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:16.890Z,1516648576.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:17.304Z,1516648577.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:17.707Z,1516648577.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:18.106Z,1516648578.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:18.496Z,1516648578.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:18.900Z,1516648578.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:19.300Z,1516648579.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:19.697Z,1516648579.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:20.112Z,1516648580.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:20.508Z,1516648580.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:20.912Z,1516648580.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:21.312Z,1516648581.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:21.706Z,1516648581.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:22.099Z,1516648582.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:22.497Z,1516648582.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:22.885Z,1516648582.885 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-22T19:16:22.920Z,1516648582.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:23.315Z,1516648583.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:23.697Z,1516648583.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:24.115Z,1516648584.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:24.498Z,1516648584.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:24.892Z,1516648584.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:25.292Z,1516648585.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:25.700Z,1516648585.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:26.130Z,1516648586.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:26.512Z,1516648586.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:26.900Z,1516648586.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:27.309Z,1516648587.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:27.693Z,1516648587.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x13461 got:0x60957
2018-01-22T19:16:27.718Z,1516648587.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:28.103Z,1516648588.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:28.495Z,1516648588.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:28.902Z,1516648588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:29.320Z,1516648589.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:29.696Z,1516648589.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:30.106Z,1516648590.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:30.504Z,1516648590.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:30.895Z,1516648590.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:31.293Z,1516648591.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:31.704Z,1516648591.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:32.108Z,1516648592.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:32.505Z,1516648592.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:32.903Z,1516648592.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:33.319Z,1516648593.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:33.723Z,1516648593.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:34.103Z,1516648594.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:34.499Z,1516648594.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:34.902Z,1516648594.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:35.320Z,1516648595.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:35.714Z,1516648595.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:36.108Z,1516648596.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:36.486Z,1516648596.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:36.912Z,1516648596.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:37.288Z,1516648597.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:37.681Z,1516648597.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:38.089Z,1516648598.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:38.515Z,1516648598.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:38.916Z,1516648598.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:39.316Z,1516648599.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:39.692Z,1516648599.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:40.100Z,1516648600.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:40.486Z,1516648600.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:40.886Z,1516648600.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:41.300Z,1516648601.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:41.724Z,1516648601.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:42.115Z,1516648602.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:42.491Z,1516648602.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:42.894Z,1516648602.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:43.290Z,1516648603.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:43.697Z,1516648603.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:44.101Z,1516648604.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:44.506Z,1516648604.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:44.929Z,1516648604.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:45.300Z,1516648605.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:45.688Z,1516648605.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:46.102Z,1516648606.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:46.500Z,1516648606.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:46.887Z,1516648606.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:47.316Z,1516648607.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:47.707Z,1516648607.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:48.116Z,1516648608.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:48.500Z,1516648608.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:48.892Z,1516648608.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:49.297Z,1516648609.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:49.680Z,1516648609.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:50.084Z,1516648610.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:50.512Z,1516648610.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:50.917Z,1516648610.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:51.294Z,1516648611.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:51.692Z,1516648611.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:52.089Z,1516648612.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:52.492Z,1516648612.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:52.886Z,1516648612.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:53.294Z,1516648613.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:53.694Z,1516648613.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:54.094Z,1516648614.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:54.500Z,1516648614.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:54.887Z,1516648614.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:55.290Z,1516648615.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:55.740Z,1516648615.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:56.104Z,1516648616.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:56.504Z,1516648616.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:56.900Z,1516648616.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:57.311Z,1516648617.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:57.694Z,1516648617.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:58.096Z,1516648618.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:58.493Z,1516648618.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:58.900Z,1516648618.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:59.308Z,1516648619.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:16:59.704Z,1516648619.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:00.104Z,1516648620.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:00.492Z,1516648620.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:00.880Z,1516648620.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:01.279Z,1516648621.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:01.686Z,1516648621.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:02.084Z,1516648622.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:02.510Z,1516648622.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:02.912Z,1516648622.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:03.315Z,1516648623.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:03.692Z,1516648623.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:04.085Z,1516648624.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:04.492Z,1516648624.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:04.892Z,1516648624.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:05.300Z,1516648625.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:05.697Z,1516648625.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:06.108Z,1516648626.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:06.491Z,1516648626.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:06.889Z,1516648626.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:07.300Z,1516648627.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:07.702Z,1516648627.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:08.092Z,1516648628.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:08.503Z,1516648628.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:08.901Z,1516648628.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:09.312Z,1516648629.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:09.739Z,1516648629.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:12.962Z,1516648632.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:13.091Z,1516648633.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:13.440Z,1516648633.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:13.862Z,1516648633.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:14.259Z,1516648634.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:14.636Z,1516648634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:15.033Z,1516648635.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:15.432Z,1516648635.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:15.836Z,1516648635.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:16.249Z,1516648636.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:16.640Z,1516648636.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:17.042Z,1516648637.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:17.433Z,1516648637.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:17.828Z,1516648637.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:18.243Z,1516648638.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:18.644Z,1516648638.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:19.033Z,1516648639.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:19.448Z,1516648639.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:19.848Z,1516648639.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:20.252Z,1516648640.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:20.632Z,1516648640.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:21.032Z,1516648641.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:21.420Z,1516648641.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:21.824Z,1516648641.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:22.248Z,1516648642.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:22.650Z,1516648642.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:23.034Z,1516648643.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:23.432Z,1516648643.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:23.836Z,1516648643.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:24.236Z,1516648644.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:24.633Z,1516648644.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:25.027Z,1516648645.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:25.441Z,1516648645.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:25.845Z,1516648645.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:26.242Z,1516648646.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:26.640Z,1516648646.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:27.031Z,1516648647.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:27.437Z,1516648647.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:27.828Z,1516648647.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:28.248Z,1516648648.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:28.636Z,1516648648.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:29.041Z,1516648649.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:29.440Z,1516648649.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:29.831Z,1516648649.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:30.243Z,1516648650.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:30.641Z,1516648650.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:31.048Z,1516648651.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:31.430Z,1516648651.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:31.830Z,1516648651.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:32.228Z,1516648652.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:32.644Z,1516648652.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:33.044Z,1516648653.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:33.448Z,1516648653.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:33.828Z,1516648653.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:34.232Z,1516648654.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:34.640Z,1516648654.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:35.044Z,1516648655.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:35.452Z,1516648655.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:35.845Z,1516648655.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:36.251Z,1516648656.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:36.643Z,1516648656.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:37.044Z,1516648657.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:37.424Z,1516648657.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:37.855Z,1516648657.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:38.226Z,1516648658.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:38.650Z,1516648658.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:39.049Z,1516648659.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:39.447Z,1516648659.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:39.828Z,1516648659.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:40.256Z,1516648660.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:40.668Z,1516648660.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:41.073Z,1516648661.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:41.446Z,1516648661.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:41.856Z,1516648661.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:42.248Z,1516648662.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:42.646Z,1516648662.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:43.062Z,1516648663.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:43.452Z,1516648663.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:43.839Z,1516648663.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:44.237Z,1516648664.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:44.640Z,1516648664.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:45.066Z,1516648665.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:45.452Z,1516648665.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:45.851Z,1516648665.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:46.253Z,1516648666.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:46.651Z,1516648666.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:47.059Z,1516648667.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:47.461Z,1516648667.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:47.888Z,1516648667.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:48.284Z,1516648668.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:48.650Z,1516648668.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:49.053Z,1516648669.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:49.459Z,1516648669.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:49.857Z,1516648669.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:50.260Z,1516648670.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:50.660Z,1516648670.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:51.064Z,1516648671.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:51.464Z,1516648671.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:51.835Z,1516648671.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:52.240Z,1516648672.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:52.636Z,1516648672.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:53.032Z,1516648673.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:53.460Z,1516648673.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:53.849Z,1516648673.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:54.260Z,1516648674.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:54.644Z,1516648674.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:55.038Z,1516648675.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:55.444Z,1516648675.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:55.846Z,1516648675.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:56.240Z,1516648676.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:56.652Z,1516648676.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:57.064Z,1516648677.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:57.446Z,1516648677.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:57.827Z,1516648677.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:58.248Z,1516648678.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:58.648Z,1516648678.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:59.032Z,1516648679.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:59.452Z,1516648679.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:17:59.864Z,1516648679.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:00.257Z,1516648680.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:00.655Z,1516648680.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:01.022Z,1516648681.022 [PNI_TCM](ERROR): CRC does not match. Expected:0x50038 got:0x818
2018-01-22T19:18:01.057Z,1516648681.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:01.431Z,1516648681.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:01.856Z,1516648681.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:02.233Z,1516648682.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:02.636Z,1516648682.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:03.079Z,1516648683.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:03.452Z,1516648683.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:03.830Z,1516648683.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:04.238Z,1516648684.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:04.641Z,1516648684.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:05.053Z,1516648685.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:05.441Z,1516648685.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:05.843Z,1516648685.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:06.237Z,1516648686.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:06.657Z,1516648686.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:07.041Z,1516648687.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:07.433Z,1516648687.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:07.837Z,1516648687.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:08.261Z,1516648688.261 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:08.261Z,1516648688.261 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-01-22T19:18:08.261Z,1516648688.261 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:18:08.274Z,1516648688.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:18:08.641Z,1516648688.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:08.641Z,1516648688.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-01-22T19:18:08.641Z,1516648688.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:18:08.643Z,1516648688.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:08.643Z,1516648688.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-01-22T19:18:08.643Z,1516648688.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:18:08.667Z,1516648688.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:18:08.667Z,1516648688.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-01-22T19:18:08.668Z,1516648688.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:18:08.668Z,1516648688.668 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:18:09.059Z,1516648689.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:18:09.060Z,1516648689.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:18:09.060Z,1516648689.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:18:09.087Z,1516648689.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:18:09.088Z,1516648689.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-01-22T19:18:09.088Z,1516648689.088 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:18:09.088Z,1516648689.088 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-01-22T19:18:09.447Z,1516648689.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:09.447Z,1516648689.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:18:09.448Z,1516648689.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:18:09.448Z,1516648689.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:18:09.448Z,1516648689.448 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:18:09.449Z,1516648689.449 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:18:09.449Z,1516648689.449 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:18:09.451Z,1516648689.451 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:13:09.1Z
2018-01-22T19:18:09.451Z,1516648689.451 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:18:09.451Z,1516648689.451 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:18:09.855Z,1516648689.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:13.210Z,1516648693.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:13.300Z,1516648693.300 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0024.lzma
2018-01-22T19:18:13.375Z,1516648693.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:13.777Z,1516648693.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:14.061Z,1516648694.061 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0024.lzma.bak
2018-01-22T19:18:14.061Z,1516648694.061 [DataOverHttps](INFO): SBD MOMSN=7751062
2018-01-22T19:18:14.148Z,1516648694.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:14.731Z,1516648694.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:14.929Z,1516648694.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:18.287Z,1516648698.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:18.435Z,1516648698.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:18.758Z,1516648698.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:19.162Z,1516648699.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:19.558Z,1516648699.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:20.013Z,1516648700.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:23.212Z,1516648703.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:23.299Z,1516648703.299 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0025.lzma
2018-01-22T19:18:23.364Z,1516648703.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:23.708Z,1516648703.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:24.090Z,1516648704.090 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0025.lzma.bak
2018-01-22T19:18:24.100Z,1516648704.100 [DataOverHttps](INFO): SBD MOMSN=7751064
2018-01-22T19:18:24.177Z,1516648704.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:24.728Z,1516648704.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:24.731Z,1516648704.731 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:18:24.732Z,1516648704.732 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:18:24.732Z,1516648704.732 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:18:24.925Z,1516648704.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:28.240Z,1516648708.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:28.380Z,1516648708.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:28.729Z,1516648708.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:29.141Z,1516648709.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:29.530Z,1516648709.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:29.909Z,1516648709.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:30.324Z,1516648710.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:30.717Z,1516648710.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:31.120Z,1516648711.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:31.518Z,1516648711.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:31.918Z,1516648711.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:32.330Z,1516648712.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:32.725Z,1516648712.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:33.112Z,1516648713.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:33.513Z,1516648713.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:33.926Z,1516648713.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:34.332Z,1516648714.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:34.728Z,1516648714.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:35.126Z,1516648715.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:35.522Z,1516648715.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:35.926Z,1516648715.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:36.337Z,1516648716.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:36.727Z,1516648716.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:37.129Z,1516648717.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:37.529Z,1516648717.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:37.925Z,1516648717.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:38.319Z,1516648718.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:38.733Z,1516648718.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:39.136Z,1516648719.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:39.535Z,1516648719.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:39.926Z,1516648719.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:40.321Z,1516648720.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:40.727Z,1516648720.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:41.129Z,1516648721.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:41.544Z,1516648721.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:41.930Z,1516648721.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:42.332Z,1516648722.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:42.720Z,1516648722.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:43.131Z,1516648723.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:43.533Z,1516648723.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:43.910Z,1516648723.910 [PNI_TCM](ERROR): CRC does not match. Expected:0x46479 got:0x1857
2018-01-22T19:18:43.952Z,1516648723.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:44.331Z,1516648724.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:44.744Z,1516648724.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:45.143Z,1516648725.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:45.544Z,1516648725.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:45.932Z,1516648725.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:46.316Z,1516648726.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:46.720Z,1516648726.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:47.120Z,1516648727.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:47.520Z,1516648727.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:47.944Z,1516648727.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:48.325Z,1516648728.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:48.718Z,1516648728.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:49.116Z,1516648729.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:49.516Z,1516648729.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:49.928Z,1516648729.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:50.313Z,1516648730.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:50.777Z,1516648730.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:51.127Z,1516648731.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:51.540Z,1516648731.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:51.924Z,1516648731.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:52.316Z,1516648732.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:52.710Z,1516648732.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:53.125Z,1516648733.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:53.541Z,1516648733.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:53.928Z,1516648733.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:54.328Z,1516648734.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:54.725Z,1516648734.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:55.116Z,1516648735.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:55.510Z,1516648735.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:55.914Z,1516648735.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:56.357Z,1516648736.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:56.738Z,1516648736.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:57.133Z,1516648737.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:57.525Z,1516648737.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:57.935Z,1516648737.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:58.326Z,1516648738.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:58.727Z,1516648738.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:59.127Z,1516648739.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:59.534Z,1516648739.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:18:59.937Z,1516648739.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:00.348Z,1516648740.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:00.710Z,1516648740.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:01.134Z,1516648741.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:01.512Z,1516648741.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:01.937Z,1516648741.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:02.321Z,1516648742.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:02.745Z,1516648742.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:03.134Z,1516648743.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:03.529Z,1516648743.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:03.931Z,1516648743.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:04.351Z,1516648744.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:04.715Z,1516648744.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:05.124Z,1516648745.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:05.371Z,1516648745.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:19:05.528Z,1516648745.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:05.949Z,1516648745.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:06.169Z,1516648746.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:19:06.333Z,1516648746.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:06.579Z,1516648746.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:19:06.717Z,1516648746.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:07.126Z,1516648747.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:07.519Z,1516648747.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:07.916Z,1516648747.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:08.313Z,1516648748.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:08.729Z,1516648748.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:09.151Z,1516648749.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:09.528Z,1516648749.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:09.927Z,1516648749.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:10.320Z,1516648750.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:10.712Z,1516648750.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:11.119Z,1516648751.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:11.532Z,1516648751.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:11.956Z,1516648751.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:12.356Z,1516648752.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:12.718Z,1516648752.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:13.120Z,1516648753.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:13.524Z,1516648753.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:13.920Z,1516648753.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:14.324Z,1516648754.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:14.737Z,1516648754.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:15.136Z,1516648755.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:15.533Z,1516648755.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:15.961Z,1516648755.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:16.319Z,1516648756.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:16.730Z,1516648756.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:17.120Z,1516648757.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:17.528Z,1516648757.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:17.947Z,1516648757.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:18.343Z,1516648758.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:18.729Z,1516648758.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:19.133Z,1516648759.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:19.525Z,1516648759.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:19.917Z,1516648759.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:20.324Z,1516648760.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:20.739Z,1516648760.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:21.129Z,1516648761.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:21.529Z,1516648761.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:21.921Z,1516648761.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:22.322Z,1516648762.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:22.722Z,1516648762.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:23.127Z,1516648763.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:23.530Z,1516648763.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:23.940Z,1516648763.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:24.332Z,1516648764.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:24.724Z,1516648764.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:25.117Z,1516648765.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:25.535Z,1516648765.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:28.799Z,1516648768.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:28.941Z,1516648768.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:29.297Z,1516648769.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:29.702Z,1516648769.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:30.106Z,1516648770.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:30.492Z,1516648770.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:30.896Z,1516648770.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:31.269Z,1516648771.269 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:19:31.270Z,1516648771.270 [BPC1] Communications Fault, FailCount= 3
2018-01-22T19:19:31.270Z,1516648771.270 [BPC1](ERROR): Communications Fault
2018-01-22T19:19:31.278Z,1516648771.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:31.315Z,1516648771.315 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:19:31.708Z,1516648771.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:32.108Z,1516648772.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:32.505Z,1516648772.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:32.518Z,1516648772.518 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:19:32.518Z,1516648772.518 [BPC1] No Fault, FailCount= 3
2018-01-22T19:19:32.949Z,1516648772.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:33.280Z,1516648773.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:33.688Z,1516648773.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:34.084Z,1516648774.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:34.517Z,1516648774.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:34.904Z,1516648774.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:35.304Z,1516648775.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:35.684Z,1516648775.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:36.087Z,1516648776.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:36.486Z,1516648776.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:36.880Z,1516648776.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:37.288Z,1516648777.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:37.689Z,1516648777.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:38.090Z,1516648778.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:38.490Z,1516648778.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:38.882Z,1516648778.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:39.279Z,1516648779.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:39.688Z,1516648779.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:40.092Z,1516648780.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:40.491Z,1516648780.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:40.892Z,1516648780.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:41.290Z,1516648781.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:41.688Z,1516648781.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:42.081Z,1516648782.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:42.488Z,1516648782.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:42.884Z,1516648782.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:43.283Z,1516648783.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:43.689Z,1516648783.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:44.096Z,1516648784.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:44.490Z,1516648784.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:44.890Z,1516648784.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:45.288Z,1516648785.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:45.683Z,1516648785.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:46.081Z,1516648786.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:46.492Z,1516648786.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:46.889Z,1516648786.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:47.289Z,1516648787.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:47.688Z,1516648787.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:48.105Z,1516648788.105 [BPC1](INFO): Initialized
2018-01-22T19:19:48.112Z,1516648788.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:48.491Z,1516648788.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:48.892Z,1516648788.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:49.284Z,1516648789.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:49.697Z,1516648789.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:50.104Z,1516648790.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:50.497Z,1516648790.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:50.888Z,1516648790.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:51.291Z,1516648791.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:51.684Z,1516648791.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:52.088Z,1516648792.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:52.507Z,1516648792.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:52.896Z,1516648792.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:53.297Z,1516648793.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:53.691Z,1516648793.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:54.083Z,1516648794.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:54.492Z,1516648794.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:54.892Z,1516648794.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:55.283Z,1516648795.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:55.700Z,1516648795.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:56.108Z,1516648796.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:56.500Z,1516648796.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:56.875Z,1516648796.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:57.275Z,1516648797.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:57.676Z,1516648797.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:58.075Z,1516648798.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:58.512Z,1516648798.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:58.899Z,1516648798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:59.306Z,1516648799.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:19:59.676Z,1516648799.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:00.075Z,1516648800.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:00.480Z,1516648800.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:00.880Z,1516648800.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:01.284Z,1516648801.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:01.701Z,1516648801.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:02.089Z,1516648802.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:02.504Z,1516648802.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:02.884Z,1516648802.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:03.279Z,1516648803.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:03.680Z,1516648803.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:04.088Z,1516648804.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:04.516Z,1516648804.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:04.893Z,1516648804.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:05.289Z,1516648805.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:05.688Z,1516648805.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:06.092Z,1516648806.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:06.481Z,1516648806.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:06.890Z,1516648806.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:07.288Z,1516648807.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:07.698Z,1516648807.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:08.100Z,1516648808.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:08.500Z,1516648808.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:08.888Z,1516648808.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:09.288Z,1516648809.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:09.685Z,1516648809.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:10.085Z,1516648810.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:10.515Z,1516648810.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:10.896Z,1516648810.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:11.316Z,1516648811.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:11.698Z,1516648811.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:12.101Z,1516648812.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:12.492Z,1516648812.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:12.877Z,1516648812.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:13.284Z,1516648813.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:13.709Z,1516648813.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:14.106Z,1516648814.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:14.490Z,1516648814.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:14.886Z,1516648814.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:15.287Z,1516648815.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:15.479Z,1516648815.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:15.685Z,1516648815.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:16.079Z,1516648816.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:16.277Z,1516648816.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:16.516Z,1516648816.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:16.687Z,1516648816.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:16.905Z,1516648816.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:17.308Z,1516648817.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:17.685Z,1516648817.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:18.088Z,1516648818.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:18.503Z,1516648818.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:18.914Z,1516648818.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:19.291Z,1516648819.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:19.688Z,1516648819.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:20.088Z,1516648820.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:20.492Z,1516648820.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:20.890Z,1516648820.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:21.312Z,1516648821.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:21.710Z,1516648821.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:22.088Z,1516648822.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:22.496Z,1516648822.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:22.886Z,1516648822.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:23.288Z,1516648823.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:23.700Z,1516648823.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:24.096Z,1516648824.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:24.496Z,1516648824.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:24.889Z,1516648824.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:25.288Z,1516648825.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:25.689Z,1516648825.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:28.939Z,1516648828.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:29.075Z,1516648829.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:29.432Z,1516648829.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:29.527Z,1516648829.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:29.835Z,1516648829.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:30.211Z,1516648830.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:30.324Z,1516648830.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:30.605Z,1516648830.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:30.727Z,1516648830.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:31.020Z,1516648831.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:31.404Z,1516648831.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:31.818Z,1516648831.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:32.220Z,1516648832.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:32.617Z,1516648832.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:33.003Z,1516648833.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:33.410Z,1516648833.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:33.812Z,1516648833.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:34.216Z,1516648834.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:34.623Z,1516648834.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:35.012Z,1516648835.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:35.417Z,1516648835.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:35.811Z,1516648835.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:36.208Z,1516648836.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:36.604Z,1516648836.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:37.016Z,1516648837.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:37.407Z,1516648837.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:37.818Z,1516648837.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:38.224Z,1516648838.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:38.616Z,1516648838.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:39.013Z,1516648839.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:39.415Z,1516648839.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:39.812Z,1516648839.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:40.217Z,1516648840.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:40.628Z,1516648840.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:41.021Z,1516648841.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:41.421Z,1516648841.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:41.799Z,1516648841.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:42.204Z,1516648842.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:42.630Z,1516648842.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:43.000Z,1516648843.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:43.399Z,1516648843.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:43.810Z,1516648843.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:44.235Z,1516648844.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:44.606Z,1516648844.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:45.002Z,1516648845.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:45.403Z,1516648845.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:45.808Z,1516648845.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:46.212Z,1516648846.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:46.610Z,1516648846.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:47.010Z,1516648847.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:47.410Z,1516648847.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:47.804Z,1516648847.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:48.202Z,1516648848.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:48.612Z,1516648848.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:49.009Z,1516648849.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:49.402Z,1516648849.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:49.817Z,1516648849.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:50.215Z,1516648850.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:50.612Z,1516648850.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:51.012Z,1516648851.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:51.408Z,1516648851.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:51.808Z,1516648851.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:52.216Z,1516648852.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:52.627Z,1516648852.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:53.020Z,1516648853.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:53.420Z,1516648853.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:53.811Z,1516648853.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:54.204Z,1516648854.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:54.612Z,1516648854.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:55.021Z,1516648855.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:55.413Z,1516648855.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:55.817Z,1516648855.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:56.224Z,1516648856.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:56.614Z,1516648856.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:57.012Z,1516648857.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:57.422Z,1516648857.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:57.551Z,1516648857.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:57.797Z,1516648857.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:58.200Z,1516648858.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:58.348Z,1516648858.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:58.627Z,1516648858.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:58.755Z,1516648858.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:20:59.028Z,1516648859.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:59.427Z,1516648859.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:20:59.798Z,1516648859.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:00.200Z,1516648860.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:00.599Z,1516648860.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:01.034Z,1516648861.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:01.403Z,1516648861.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:01.816Z,1516648861.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:02.217Z,1516648862.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:02.612Z,1516648862.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:03.009Z,1516648863.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:03.411Z,1516648863.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:03.809Z,1516648863.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:04.209Z,1516648864.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:04.622Z,1516648864.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:05.017Z,1516648865.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:05.421Z,1516648865.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:05.816Z,1516648865.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:06.215Z,1516648866.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:06.620Z,1516648866.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:06.999Z,1516648866.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:07.397Z,1516648867.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:07.827Z,1516648867.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:08.227Z,1516648868.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:08.627Z,1516648868.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:09.000Z,1516648869.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:09.404Z,1516648869.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:09.404Z,1516648869.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-01-22T19:21:09.404Z,1516648869.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:21:09.447Z,1516648869.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:21:09.798Z,1516648869.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:09.798Z,1516648869.798 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-01-22T19:21:09.798Z,1516648869.798 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:21:09.800Z,1516648869.800 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:09.800Z,1516648869.800 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-01-22T19:21:09.800Z,1516648869.800 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:21:09.813Z,1516648869.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:21:09.813Z,1516648869.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-01-22T19:21:09.813Z,1516648869.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:21:09.813Z,1516648869.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:21:10.205Z,1516648870.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:21:10.205Z,1516648870.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:21:10.206Z,1516648870.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:21:10.218Z,1516648870.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:21:10.218Z,1516648870.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-01-22T19:21:10.219Z,1516648870.219 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:21:10.219Z,1516648870.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-01-22T19:21:10.619Z,1516648870.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:10.619Z,1516648870.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:21:10.620Z,1516648870.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:21:10.620Z,1516648870.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:21:10.620Z,1516648870.620 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:21:10.621Z,1516648870.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:21:10.621Z,1516648870.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:21:11.012Z,1516648871.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:11.415Z,1516648871.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:11.567Z,1516648871.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:11.803Z,1516648871.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:12.204Z,1516648872.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:12.365Z,1516648872.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:12.609Z,1516648872.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:12.775Z,1516648872.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:13.007Z,1516648873.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:13.400Z,1516648873.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:13.571Z,1516648873.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:13.814Z,1516648873.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:14.224Z,1516648874.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:14.367Z,1516648874.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:14.616Z,1516648874.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:14.771Z,1516648874.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:15.003Z,1516648875.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:15.414Z,1516648875.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:15.800Z,1516648875.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:16.203Z,1516648876.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:16.617Z,1516648876.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:17.016Z,1516648877.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:17.416Z,1516648877.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:17.814Z,1516648877.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:18.203Z,1516648878.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:18.608Z,1516648878.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:19.061Z,1516648879.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:19.404Z,1516648879.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:19.816Z,1516648879.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:20.224Z,1516648880.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:20.616Z,1516648880.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:21.008Z,1516648881.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:21.411Z,1516648881.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:21.812Z,1516648881.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:22.216Z,1516648882.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:22.622Z,1516648882.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:23.015Z,1516648883.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:23.417Z,1516648883.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:23.815Z,1516648883.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:24.209Z,1516648884.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:24.616Z,1516648884.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:25.016Z,1516648885.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:25.413Z,1516648885.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:25.631Z,1516648885.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:25.823Z,1516648885.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:26.427Z,1516648886.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:26.831Z,1516648886.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:29.109Z,1516648889.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:29.260Z,1516648889.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:29.578Z,1516648889.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:30.036Z,1516648890.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:30.375Z,1516648890.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:30.789Z,1516648890.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:31.202Z,1516648891.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:31.581Z,1516648891.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:31.980Z,1516648891.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:32.383Z,1516648892.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:32.785Z,1516648892.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:33.182Z,1516648893.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:33.594Z,1516648893.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:34.064Z,1516648894.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:34.400Z,1516648894.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:34.785Z,1516648894.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:35.192Z,1516648895.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:35.595Z,1516648895.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:35.999Z,1516648895.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:36.381Z,1516648896.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:36.776Z,1516648896.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:37.184Z,1516648897.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:37.586Z,1516648897.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:37.985Z,1516648897.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:38.464Z,1516648898.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:38.785Z,1516648898.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:39.262Z,1516648899.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:39.579Z,1516648899.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:39.659Z,1516648899.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:39.979Z,1516648899.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:40.432Z,1516648900.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:40.455Z,1516648900.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:40.793Z,1516648900.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:40.863Z,1516648900.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:41.188Z,1516648901.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:41.596Z,1516648901.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:41.991Z,1516648901.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:42.368Z,1516648902.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:42.788Z,1516648902.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:43.172Z,1516648903.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:43.590Z,1516648903.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:43.999Z,1516648903.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:44.402Z,1516648904.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:44.776Z,1516648904.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:45.180Z,1516648905.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:45.612Z,1516648905.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:45.985Z,1516648905.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:46.385Z,1516648906.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:46.788Z,1516648906.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:47.180Z,1516648907.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:47.595Z,1516648907.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:47.996Z,1516648907.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:48.394Z,1516648908.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:48.785Z,1516648908.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:49.188Z,1516648909.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:49.589Z,1516648909.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:49.994Z,1516648909.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:50.400Z,1516648910.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:50.786Z,1516648910.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:51.185Z,1516648911.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:51.607Z,1516648911.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:51.993Z,1516648911.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:52.453Z,1516648912.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:52.782Z,1516648912.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:53.184Z,1516648913.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:53.587Z,1516648913.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:53.667Z,1516648913.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:53.987Z,1516648913.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:54.459Z,1516648914.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:54.463Z,1516648914.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:54.785Z,1516648914.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:54.887Z,1516648914.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:21:55.189Z,1516648915.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:55.578Z,1516648915.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:55.986Z,1516648915.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:56.394Z,1516648916.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:56.793Z,1516648916.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:57.186Z,1516648917.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:57.584Z,1516648917.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:57.986Z,1516648917.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:58.386Z,1516648918.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:58.804Z,1516648918.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:59.193Z,1516648919.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:59.594Z,1516648919.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:21:59.992Z,1516648919.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:00.396Z,1516648920.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:00.788Z,1516648920.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:01.173Z,1516648921.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:01.572Z,1516648921.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:01.998Z,1516648921.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:02.412Z,1516648922.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:02.806Z,1516648922.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:03.184Z,1516648923.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:03.577Z,1516648923.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:03.988Z,1516648923.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:04.392Z,1516648924.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:04.792Z,1516648924.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:05.192Z,1516648925.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:05.587Z,1516648925.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:05.982Z,1516648925.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:06.414Z,1516648926.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:06.786Z,1516648926.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:07.188Z,1516648927.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:07.586Z,1516648927.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:07.994Z,1516648927.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:08.464Z,1516648928.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:08.794Z,1516648928.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:09.197Z,1516648929.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:09.596Z,1516648929.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:09.000Z,1516648930.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:10.388Z,1516648930.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:10.794Z,1516648930.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:11.205Z,1516648931.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:11.585Z,1516648931.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:11.979Z,1516648931.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:12.383Z,1516648932.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:12.783Z,1516648932.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:13.176Z,1516648933.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:13.580Z,1516648933.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:13.948Z,1516648933.948 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T19:22:13.948Z,1516648933.948 [NAL9602] Data Fault, FailCount= 2
2018-01-22T19:22:13.948Z,1516648933.948 [NAL9602](ERROR): Data Fault
2018-01-22T19:22:13.984Z,1516648933.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:14.021Z,1516648934.021 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T19:22:14.340Z,1516648934.340 [NAL9602](INFO): Powering down
2018-01-22T19:22:14.386Z,1516648934.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:14.788Z,1516648934.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:15.178Z,1516648935.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:15.191Z,1516648935.191 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:22:15.191Z,1516648935.191 [NAL9602] No Fault, FailCount= 2
2018-01-22T19:22:15.578Z,1516648935.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:15.984Z,1516648935.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:16.384Z,1516648936.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:16.782Z,1516648936.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:17.178Z,1516648937.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:17.588Z,1516648937.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:17.984Z,1516648937.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:18.392Z,1516648938.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:18.792Z,1516648938.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:19.181Z,1516648939.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:19.586Z,1516648939.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:19.985Z,1516648939.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:20.390Z,1516648940.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:20.792Z,1516648940.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:21.189Z,1516648941.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:21.591Z,1516648941.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:21.989Z,1516648941.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:22.389Z,1516648942.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:22.784Z,1516648942.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:23.176Z,1516648943.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:23.584Z,1516648943.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:23.980Z,1516648943.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:24.384Z,1516648944.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:24.784Z,1516648944.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:25.180Z,1516648945.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:25.580Z,1516648945.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:25.979Z,1516648945.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:30.680Z,1516648950.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:30.844Z,1516648950.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:31.215Z,1516648951.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:31.619Z,1516648951.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:32.005Z,1516648952.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:32.408Z,1516648952.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:32.820Z,1516648952.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:33.212Z,1516648953.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:33.590Z,1516648953.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:34.016Z,1516648954.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:34.400Z,1516648954.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:34.792Z,1516648954.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:35.209Z,1516648955.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:35.593Z,1516648955.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:35.998Z,1516648955.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:36.394Z,1516648956.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:36.821Z,1516648956.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:37.232Z,1516648957.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:37.608Z,1516648957.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:38.039Z,1516648958.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:38.416Z,1516648958.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:38.813Z,1516648958.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:39.227Z,1516648959.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:39.607Z,1516648959.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:40.009Z,1516648960.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:40.389Z,1516648960.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:40.788Z,1516648960.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:41.191Z,1516648961.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:41.588Z,1516648961.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:41.994Z,1516648961.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:42.389Z,1516648962.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:42.796Z,1516648962.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:43.193Z,1516648963.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:43.595Z,1516648963.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:43.996Z,1516648963.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:44.348Z,1516648964.348 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:22:44.401Z,1516648964.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:44.799Z,1516648964.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:45.184Z,1516648965.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:45.588Z,1516648965.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:45.988Z,1516648965.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:46.384Z,1516648966.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:46.800Z,1516648966.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:47.184Z,1516648967.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:47.588Z,1516648967.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:47.984Z,1516648967.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:48.388Z,1516648968.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:48.783Z,1516648968.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:49.183Z,1516648969.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:49.579Z,1516648969.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:49.988Z,1516648969.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:50.384Z,1516648970.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:50.784Z,1516648970.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:51.188Z,1516648971.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:51.596Z,1516648971.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:51.991Z,1516648971.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:52.391Z,1516648972.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:52.793Z,1516648972.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:53.195Z,1516648973.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:53.586Z,1516648973.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:53.986Z,1516648973.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:54.389Z,1516648974.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:54.796Z,1516648974.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:55.201Z,1516648975.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:55.548Z,1516648975.548 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:22:55.594Z,1516648975.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:55.994Z,1516648975.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:56.401Z,1516648976.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:56.803Z,1516648976.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:57.204Z,1516648977.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:57.593Z,1516648977.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:57.995Z,1516648977.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:58.393Z,1516648978.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:58.799Z,1516648978.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:59.204Z,1516648979.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:22:59.605Z,1516648979.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:00.002Z,1516648980.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:00.395Z,1516648980.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:00.800Z,1516648980.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:01.196Z,1516648981.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:01.580Z,1516648981.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:02.002Z,1516648982.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:02.411Z,1516648982.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:02.806Z,1516648982.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:03.179Z,1516648983.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:03.579Z,1516648983.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:03.980Z,1516648983.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:04.384Z,1516648984.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:04.808Z,1516648984.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:05.208Z,1516648985.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:05.607Z,1516648985.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:06.008Z,1516648986.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:06.396Z,1516648986.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:06.786Z,1516648986.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:07.188Z,1516648987.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:07.586Z,1516648987.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:07.994Z,1516648987.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:08.401Z,1516648988.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:08.794Z,1516648988.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:09.190Z,1516648989.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:09.593Z,1516648989.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:10.000Z,1516648990.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:10.397Z,1516648990.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:10.796Z,1516648990.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:11.211Z,1516648991.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:11.602Z,1516648991.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:12.006Z,1516648992.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:12.399Z,1516648992.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:12.789Z,1516648992.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:13.193Z,1516648993.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:13.580Z,1516648993.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:14.003Z,1516648994.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:14.401Z,1516648994.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:14.804Z,1516648994.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:15.187Z,1516648995.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:15.590Z,1516648995.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:15.996Z,1516648995.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:16.395Z,1516648996.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:16.802Z,1516648996.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:17.215Z,1516648997.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:17.605Z,1516648997.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:18.012Z,1516648998.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:18.398Z,1516648998.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:18.796Z,1516648998.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:19.191Z,1516648999.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:19.604Z,1516648999.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:19.999Z,1516648999.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:20.416Z,1516649000.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:20.808Z,1516649000.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:21.197Z,1516649001.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:21.598Z,1516649001.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:21.992Z,1516649001.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:22.400Z,1516649002.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:22.780Z,1516649002.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:23.206Z,1516649003.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:23.605Z,1516649003.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:24.005Z,1516649004.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:24.409Z,1516649004.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:24.788Z,1516649004.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:25.188Z,1516649005.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:25.191Z,1516649005.191 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:23:25.191Z,1516649005.191 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:23:25.191Z,1516649005.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:23:25.191Z,1516649005.191 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:23:25.585Z,1516649005.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:25.588Z,1516649005.588 [Default:CheckIn:D] Stopped
2018-01-22T19:23:25.588Z,1516649005.588 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:23:26.009Z,1516649006.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:26.013Z,1516649006.013 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.014994 min 
2018-01-22T19:23:26.013Z,1516649006.013 [Default:CheckIn:E] Stopped
2018-01-22T19:23:26.013Z,1516649006.013 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:23:26.013Z,1516649006.013 [Default:CheckIn] Stopped
2018-01-22T19:23:26.013Z,1516649006.013 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:23:26.014Z,1516649006.014 [Default:CheckIn](INFO): Running loop #7
2018-01-22T19:23:26.014Z,1516649006.014 [Default:CheckIn] Running Loop=7
2018-01-22T19:23:26.014Z,1516649006.014 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:23:26.014Z,1516649006.014 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:23:29.280Z,1516649009.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:29.428Z,1516649009.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:29.775Z,1516649009.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:30.180Z,1516649010.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:30.614Z,1516649010.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:30.992Z,1516649010.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:31.390Z,1516649011.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:31.787Z,1516649011.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:32.175Z,1516649012.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:32.626Z,1516649012.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:32.972Z,1516649012.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:33.369Z,1516649013.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:33.768Z,1516649013.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:34.237Z,1516649014.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:34.584Z,1516649014.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:34.996Z,1516649014.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:35.380Z,1516649015.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:35.779Z,1516649015.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:36.216Z,1516649016.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:36.583Z,1516649016.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:36.990Z,1516649016.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:37.390Z,1516649017.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:37.787Z,1516649017.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:38.179Z,1516649018.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:38.588Z,1516649018.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:38.963Z,1516649018.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:39.372Z,1516649019.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:39.772Z,1516649019.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:40.178Z,1516649020.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:40.578Z,1516649020.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:40.978Z,1516649020.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:41.371Z,1516649021.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:41.778Z,1516649021.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:42.177Z,1516649022.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:42.569Z,1516649022.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:42.988Z,1516649022.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:43.380Z,1516649023.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:43.779Z,1516649023.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:44.170Z,1516649024.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:44.617Z,1516649024.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:44.968Z,1516649024.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:45.372Z,1516649025.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:45.772Z,1516649025.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:46.178Z,1516649026.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:46.648Z,1516649026.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:46.978Z,1516649026.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:47.370Z,1516649027.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:47.770Z,1516649027.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:48.181Z,1516649028.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:48.587Z,1516649028.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:48.991Z,1516649028.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:49.393Z,1516649029.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:49.790Z,1516649029.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:50.196Z,1516649030.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:50.588Z,1516649030.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:50.971Z,1516649030.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:51.370Z,1516649031.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:51.784Z,1516649031.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:52.184Z,1516649032.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:52.585Z,1516649032.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:52.992Z,1516649032.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:53.376Z,1516649033.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:53.781Z,1516649033.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:54.177Z,1516649034.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:54.570Z,1516649034.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:54.986Z,1516649034.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:55.386Z,1516649035.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:55.788Z,1516649035.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:56.176Z,1516649036.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:56.580Z,1516649036.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:56.984Z,1516649036.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:57.377Z,1516649037.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:57.780Z,1516649037.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:58.186Z,1516649038.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:58.641Z,1516649038.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:58.978Z,1516649038.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:59.372Z,1516649039.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:23:59.772Z,1516649039.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:00.189Z,1516649040.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:00.608Z,1516649040.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:00.996Z,1516649040.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:01.393Z,1516649041.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:01.790Z,1516649041.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:02.172Z,1516649042.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:02.571Z,1516649042.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:02.976Z,1516649042.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:03.372Z,1516649043.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:03.783Z,1516649043.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:04.188Z,1516649044.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:04.592Z,1516649044.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:04.996Z,1516649044.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:05.376Z,1516649045.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:05.764Z,1516649045.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:06.169Z,1516649046.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:06.592Z,1516649046.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:06.994Z,1516649046.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:07.403Z,1516649047.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:07.778Z,1516649047.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:08.176Z,1516649048.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:08.577Z,1516649048.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:08.973Z,1516649048.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:09.373Z,1516649049.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:09.784Z,1516649049.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:10.188Z,1516649050.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:10.581Z,1516649050.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:10.581Z,1516649050.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-01-22T19:24:10.581Z,1516649050.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:24:10.619Z,1516649050.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:24:10.992Z,1516649050.992 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:10.992Z,1516649050.992 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-01-22T19:24:10.992Z,1516649050.992 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:24:10.994Z,1516649050.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:10.994Z,1516649050.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-01-22T19:24:10.994Z,1516649050.994 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:24:11.026Z,1516649051.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:24:11.026Z,1516649051.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-01-22T19:24:11.031Z,1516649051.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:24:11.031Z,1516649051.031 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:24:11.371Z,1516649051.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:24:11.371Z,1516649051.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:24:11.372Z,1516649051.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:24:11.384Z,1516649051.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:24:11.384Z,1516649051.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-01-22T19:24:11.385Z,1516649051.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:24:11.385Z,1516649051.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-01-22T19:24:11.784Z,1516649051.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:11.784Z,1516649051.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:24:11.785Z,1516649051.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:24:11.785Z,1516649051.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:24:11.785Z,1516649051.785 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:24:11.786Z,1516649051.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:24:11.786Z,1516649051.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:24:12.185Z,1516649052.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:12.634Z,1516649052.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:12.989Z,1516649052.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:13.391Z,1516649053.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:13.788Z,1516649053.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:14.181Z,1516649054.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:14.564Z,1516649054.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:14.988Z,1516649054.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:15.390Z,1516649055.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:15.768Z,1516649055.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:16.195Z,1516649056.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:16.594Z,1516649056.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:16.978Z,1516649056.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:17.372Z,1516649057.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:17.776Z,1516649057.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:18.170Z,1516649058.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:18.574Z,1516649058.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:18.978Z,1516649058.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:19.377Z,1516649059.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:19.778Z,1516649059.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:20.174Z,1516649060.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:20.576Z,1516649060.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:20.988Z,1516649060.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:21.383Z,1516649061.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:21.788Z,1516649061.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:22.176Z,1516649062.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:22.584Z,1516649062.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:22.988Z,1516649062.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:23.384Z,1516649063.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:23.784Z,1516649063.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:24.180Z,1516649064.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:24.578Z,1516649064.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:24.996Z,1516649064.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:25.389Z,1516649065.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:25.786Z,1516649065.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:26.181Z,1516649066.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:29.530Z,1516649069.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:29.680Z,1516649069.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:30.026Z,1516649070.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:30.403Z,1516649070.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:30.806Z,1516649070.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:31.198Z,1516649071.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:31.604Z,1516649071.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:32.039Z,1516649072.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:32.430Z,1516649072.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:32.816Z,1516649072.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:33.199Z,1516649073.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:33.608Z,1516649073.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:34.016Z,1516649074.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:34.416Z,1516649074.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:34.816Z,1516649074.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:35.202Z,1516649075.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:35.605Z,1516649075.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:36.014Z,1516649076.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:36.419Z,1516649076.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:36.810Z,1516649076.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:37.188Z,1516649077.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:37.592Z,1516649077.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:38.024Z,1516649078.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:38.449Z,1516649078.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:38.816Z,1516649078.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:39.212Z,1516649079.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:39.592Z,1516649079.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:40.017Z,1516649080.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:40.414Z,1516649080.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:40.815Z,1516649080.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:41.192Z,1516649081.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:41.600Z,1516649081.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:42.002Z,1516649082.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:42.412Z,1516649082.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:42.810Z,1516649082.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:43.196Z,1516649083.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:43.598Z,1516649083.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:44.009Z,1516649084.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:44.420Z,1516649084.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:44.821Z,1516649084.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:45.201Z,1516649085.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:45.601Z,1516649085.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:46.030Z,1516649086.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:46.415Z,1516649086.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:46.815Z,1516649086.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:47.192Z,1516649087.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:47.588Z,1516649087.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:48.014Z,1516649088.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:48.417Z,1516649088.417 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:24:48.417Z,1516649088.417 [BPC1] Communications Fault, FailCount= 4
2018-01-22T19:24:48.417Z,1516649088.417 [BPC1](ERROR): Communications Fault
2018-01-22T19:24:48.424Z,1516649088.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:48.444Z,1516649088.444 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:24:48.802Z,1516649088.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:49.196Z,1516649089.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:49.596Z,1516649089.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:49.636Z,1516649089.636 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:24:49.637Z,1516649089.637 [BPC1] No Fault, FailCount= 4
2018-01-22T19:24:50.061Z,1516649090.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:50.424Z,1516649090.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:50.826Z,1516649090.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:51.196Z,1516649091.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:51.604Z,1516649091.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:52.008Z,1516649092.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:52.475Z,1516649092.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:52.802Z,1516649092.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:53.204Z,1516649093.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:53.595Z,1516649093.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:54.002Z,1516649094.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:54.407Z,1516649094.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:54.808Z,1516649094.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:55.196Z,1516649095.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:55.595Z,1516649095.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:56.008Z,1516649096.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:56.408Z,1516649096.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:56.806Z,1516649096.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:57.197Z,1516649097.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:57.598Z,1516649097.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:58.016Z,1516649098.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:58.440Z,1516649098.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:58.806Z,1516649098.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:59.208Z,1516649099.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:24:59.596Z,1516649099.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:00.010Z,1516649100.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:00.440Z,1516649100.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:00.807Z,1516649100.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:01.200Z,1516649101.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:01.608Z,1516649101.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:02.009Z,1516649102.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:02.432Z,1516649102.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:02.820Z,1516649102.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:03.209Z,1516649103.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:03.601Z,1516649103.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:04.018Z,1516649104.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:04.431Z,1516649104.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:04.810Z,1516649104.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:05.215Z,1516649105.215 [BPC1](INFO): Initialized
2018-01-22T19:25:05.228Z,1516649105.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:05.588Z,1516649105.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:06.018Z,1516649106.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:06.468Z,1516649106.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:06.816Z,1516649106.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:07.201Z,1516649107.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:07.598Z,1516649107.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:08.011Z,1516649108.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:08.401Z,1516649108.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:08.817Z,1516649108.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:09.197Z,1516649109.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:09.597Z,1516649109.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:10.015Z,1516649110.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:10.405Z,1516649110.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:10.820Z,1516649110.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:11.216Z,1516649111.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:11.597Z,1516649111.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:12.004Z,1516649112.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:12.445Z,1516649112.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:12.807Z,1516649112.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:13.218Z,1516649113.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:13.616Z,1516649113.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:14.026Z,1516649114.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:14.443Z,1516649114.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:14.821Z,1516649114.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:15.206Z,1516649115.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:15.606Z,1516649115.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:16.009Z,1516649116.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:16.450Z,1516649116.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:16.818Z,1516649116.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:17.214Z,1516649117.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:17.600Z,1516649117.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:18.008Z,1516649118.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:18.465Z,1516649118.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:18.796Z,1516649118.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:19.202Z,1516649119.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:19.602Z,1516649119.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:20.002Z,1516649120.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:20.456Z,1516649120.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:20.812Z,1516649120.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:21.200Z,1516649121.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:21.605Z,1516649121.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:22.007Z,1516649122.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:22.409Z,1516649122.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:22.816Z,1516649122.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:23.214Z,1516649123.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:23.604Z,1516649123.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:24.008Z,1516649124.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:24.388Z,1516649124.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:24.821Z,1516649124.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:25.217Z,1516649125.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:25.610Z,1516649125.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:26.021Z,1516649126.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:26.470Z,1516649126.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:29.628Z,1516649129.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:29.747Z,1516649129.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:30.119Z,1516649130.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:30.539Z,1516649130.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:30.926Z,1516649130.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:31.296Z,1516649131.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:31.728Z,1516649131.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:32.089Z,1516649132.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:32.500Z,1516649132.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:32.896Z,1516649132.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:33.309Z,1516649133.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:33.701Z,1516649133.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:34.108Z,1516649134.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:34.543Z,1516649134.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:34.900Z,1516649134.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:35.300Z,1516649135.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:35.696Z,1516649135.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:36.108Z,1516649136.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:36.516Z,1516649136.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:36.916Z,1516649136.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:37.295Z,1516649137.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:37.704Z,1516649137.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:38.091Z,1516649138.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:38.500Z,1516649138.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:38.904Z,1516649138.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:39.305Z,1516649139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:39.711Z,1516649139.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:40.109Z,1516649140.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:40.496Z,1516649140.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:40.896Z,1516649140.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:41.304Z,1516649141.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:41.701Z,1516649141.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:42.109Z,1516649142.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:42.516Z,1516649142.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:42.946Z,1516649142.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:43.301Z,1516649143.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:43.704Z,1516649143.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:43.717Z,1516649143.717 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:25:44.104Z,1516649144.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:44.527Z,1516649144.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:44.979Z,1516649144.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:45.301Z,1516649145.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:45.701Z,1516649145.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:46.109Z,1516649146.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:46.516Z,1516649146.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:46.910Z,1516649146.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:47.308Z,1516649147.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:47.701Z,1516649147.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:48.104Z,1516649148.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:48.533Z,1516649148.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:48.920Z,1516649148.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:49.292Z,1516649149.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:49.696Z,1516649149.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:50.102Z,1516649150.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:50.505Z,1516649150.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:50.940Z,1516649150.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:51.296Z,1516649151.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:51.702Z,1516649151.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:52.108Z,1516649152.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:52.499Z,1516649152.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:52.907Z,1516649152.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:53.301Z,1516649153.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:53.696Z,1516649153.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:54.112Z,1516649154.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:54.516Z,1516649154.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:54.908Z,1516649154.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:55.308Z,1516649155.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:55.704Z,1516649155.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:56.110Z,1516649156.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:56.517Z,1516649156.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:56.916Z,1516649156.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:57.307Z,1516649157.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:57.706Z,1516649157.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:58.111Z,1516649158.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:58.522Z,1516649158.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:58.909Z,1516649158.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:59.312Z,1516649159.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:25:59.688Z,1516649159.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:00.112Z,1516649160.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:00.530Z,1516649160.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:00.903Z,1516649160.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:01.299Z,1516649161.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:01.704Z,1516649161.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:02.103Z,1516649162.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:02.565Z,1516649162.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:02.912Z,1516649162.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:03.308Z,1516649163.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:03.712Z,1516649163.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:04.122Z,1516649164.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:04.513Z,1516649164.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:04.910Z,1516649164.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:05.288Z,1516649165.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:05.692Z,1516649165.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:06.110Z,1516649166.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:06.509Z,1516649166.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:06.914Z,1516649166.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:07.296Z,1516649167.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:07.696Z,1516649167.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:08.106Z,1516649168.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:08.529Z,1516649168.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:08.908Z,1516649168.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:09.295Z,1516649169.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:09.702Z,1516649169.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:10.108Z,1516649170.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:10.540Z,1516649170.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:10.902Z,1516649170.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:11.301Z,1516649171.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:11.695Z,1516649171.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:12.109Z,1516649172.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:12.516Z,1516649172.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:12.910Z,1516649172.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:13.308Z,1516649173.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:13.692Z,1516649173.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:14.118Z,1516649174.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:14.534Z,1516649174.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:14.914Z,1516649174.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:15.291Z,1516649175.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:15.700Z,1516649175.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:16.101Z,1516649176.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:16.573Z,1516649176.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:16.901Z,1516649176.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:17.301Z,1516649177.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:17.700Z,1516649177.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:18.104Z,1516649178.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:18.502Z,1516649178.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:18.904Z,1516649178.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:19.301Z,1516649179.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:19.705Z,1516649179.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:20.097Z,1516649180.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:20.494Z,1516649180.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:20.905Z,1516649180.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:21.302Z,1516649181.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:21.701Z,1516649181.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:22.108Z,1516649182.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:22.547Z,1516649182.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:22.908Z,1516649182.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:23.299Z,1516649183.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:23.698Z,1516649183.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:24.097Z,1516649184.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:24.559Z,1516649184.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:24.921Z,1516649184.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:25.308Z,1516649185.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:25.704Z,1516649185.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:26.105Z,1516649186.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:26.555Z,1516649186.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:29.712Z,1516649189.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:29.855Z,1516649189.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:30.213Z,1516649190.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:30.621Z,1516649190.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:31.000Z,1516649191.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:31.381Z,1516649191.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:31.789Z,1516649191.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:32.184Z,1516649192.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:32.588Z,1516649192.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:32.992Z,1516649192.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:33.380Z,1516649193.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:33.784Z,1516649193.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:34.192Z,1516649194.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:34.588Z,1516649194.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:34.992Z,1516649194.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:35.379Z,1516649195.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:35.776Z,1516649195.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:36.187Z,1516649196.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:36.596Z,1516649196.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:36.988Z,1516649196.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:37.380Z,1516649197.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:37.784Z,1516649197.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:38.189Z,1516649198.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:38.589Z,1516649198.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:39.007Z,1516649199.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:39.382Z,1516649199.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:39.784Z,1516649199.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:40.194Z,1516649200.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:40.589Z,1516649200.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:40.990Z,1516649200.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:41.369Z,1516649201.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:41.768Z,1516649201.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:42.200Z,1516649202.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:42.599Z,1516649202.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:42.997Z,1516649202.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:43.385Z,1516649203.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:43.780Z,1516649203.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:44.192Z,1516649204.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:44.642Z,1516649204.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:44.995Z,1516649204.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:45.386Z,1516649205.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:45.788Z,1516649205.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:46.191Z,1516649206.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:46.588Z,1516649206.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:46.987Z,1516649206.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:47.392Z,1516649207.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:47.790Z,1516649207.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:48.202Z,1516649208.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:48.604Z,1516649208.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:49.004Z,1516649209.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:49.393Z,1516649209.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:49.767Z,1516649209.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:50.202Z,1516649210.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:50.603Z,1516649210.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:50.992Z,1516649210.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:51.376Z,1516649211.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:51.776Z,1516649211.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:52.186Z,1516649212.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:52.612Z,1516649212.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:52.981Z,1516649212.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:53.380Z,1516649213.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:53.782Z,1516649213.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:54.182Z,1516649214.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:54.593Z,1516649214.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:55.017Z,1516649215.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:55.378Z,1516649215.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:55.780Z,1516649215.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:56.204Z,1516649216.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:56.600Z,1516649216.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:56.992Z,1516649216.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:57.380Z,1516649217.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:57.801Z,1516649217.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:58.195Z,1516649218.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:58.649Z,1516649218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:58.000Z,1516649219.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:59.377Z,1516649219.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:26:59.776Z,1516649219.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:00.203Z,1516649220.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:00.585Z,1516649220.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:01.004Z,1516649221.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:01.376Z,1516649221.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:01.780Z,1516649221.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:02.183Z,1516649222.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:02.582Z,1516649222.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:02.983Z,1516649222.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:03.379Z,1516649223.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:03.776Z,1516649223.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:04.190Z,1516649224.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:04.619Z,1516649224.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:04.990Z,1516649224.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:05.384Z,1516649225.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:05.780Z,1516649225.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:06.189Z,1516649226.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:06.621Z,1516649226.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:06.993Z,1516649226.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:07.386Z,1516649227.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:07.787Z,1516649227.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:08.187Z,1516649228.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:08.613Z,1516649228.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:08.000Z,1516649229.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:09.395Z,1516649229.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:09.794Z,1516649229.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:10.197Z,1516649230.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:10.622Z,1516649230.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:10.982Z,1516649230.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:11.388Z,1516649231.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:11.388Z,1516649231.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-01-22T19:27:11.388Z,1516649231.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:27:11.431Z,1516649231.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:27:11.813Z,1516649231.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:27:11.813Z,1516649231.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-01-22T19:27:12.180Z,1516649232.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:27:12.181Z,1516649232.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:27:12.181Z,1516649232.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:27:12.183Z,1516649232.183 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:12.183Z,1516649232.183 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-01-22T19:27:12.183Z,1516649232.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:27:12.185Z,1516649232.185 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:12.185Z,1516649232.185 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-01-22T19:27:12.185Z,1516649232.185 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:27:12.213Z,1516649232.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:27:12.213Z,1516649232.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:27:12.640Z,1516649232.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:12.687Z,1516649232.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:27:12.687Z,1516649232.687 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-01-22T19:27:12.688Z,1516649232.688 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:27:12.688Z,1516649232.688 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-01-22T19:27:12.992Z,1516649232.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:12.992Z,1516649232.992 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:27:12.993Z,1516649232.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:27:12.993Z,1516649232.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:27:12.993Z,1516649232.993 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:27:12.994Z,1516649232.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:27:12.994Z,1516649232.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:27:13.382Z,1516649233.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:13.784Z,1516649233.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:14.178Z,1516649234.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:14.588Z,1516649234.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:14.999Z,1516649234.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:15.390Z,1516649235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:15.789Z,1516649235.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:16.183Z,1516649236.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:16.576Z,1516649236.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:16.984Z,1516649236.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:17.394Z,1516649237.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:17.792Z,1516649237.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:18.194Z,1516649238.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:18.645Z,1516649238.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:18.987Z,1516649238.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:19.391Z,1516649239.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:19.769Z,1516649239.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:20.172Z,1516649240.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:20.646Z,1516649240.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:20.999Z,1516649240.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:21.416Z,1516649241.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:21.785Z,1516649241.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:22.188Z,1516649242.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:22.665Z,1516649242.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:23.008Z,1516649243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:23.404Z,1516649243.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:23.816Z,1516649243.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:24.200Z,1516649244.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:24.675Z,1516649244.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:25.012Z,1516649245.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:25.381Z,1516649245.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:25.784Z,1516649245.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:26.186Z,1516649246.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:26.689Z,1516649246.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:32.931Z,1516649252.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:33.072Z,1516649253.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:33.396Z,1516649253.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:33.820Z,1516649253.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:34.196Z,1516649254.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:34.652Z,1516649254.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:35.004Z,1516649255.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:35.449Z,1516649255.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:35.812Z,1516649255.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:36.212Z,1516649256.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:36.721Z,1516649256.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:37.017Z,1516649257.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:37.414Z,1516649257.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:37.806Z,1516649257.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:38.210Z,1516649258.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:38.665Z,1516649258.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:39.002Z,1516649259.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:39.388Z,1516649259.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:39.789Z,1516649259.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:40.188Z,1516649260.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:40.656Z,1516649260.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:41.016Z,1516649261.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:41.402Z,1516649261.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:41.796Z,1516649261.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:42.208Z,1516649262.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:42.596Z,1516649262.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:43.064Z,1516649263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:43.409Z,1516649263.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:43.805Z,1516649263.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:44.207Z,1516649264.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:44.600Z,1516649264.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:45.021Z,1516649265.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:45.400Z,1516649265.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:45.808Z,1516649265.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:46.196Z,1516649266.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:46.659Z,1516649266.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:47.012Z,1516649267.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:47.415Z,1516649267.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:47.803Z,1516649267.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:48.200Z,1516649268.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:48.658Z,1516649268.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:49.008Z,1516649269.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:49.422Z,1516649269.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:49.818Z,1516649269.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:50.217Z,1516649270.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:50.652Z,1516649270.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:50.996Z,1516649270.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:51.400Z,1516649271.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:51.792Z,1516649271.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:52.196Z,1516649272.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:52.672Z,1516649272.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:53.026Z,1516649273.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:53.402Z,1516649273.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:53.793Z,1516649273.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:54.207Z,1516649274.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:54.596Z,1516649274.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:55.002Z,1516649275.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:55.409Z,1516649275.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:55.808Z,1516649275.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:56.208Z,1516649276.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:56.612Z,1516649276.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:57.026Z,1516649277.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:57.410Z,1516649277.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:57.801Z,1516649277.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:58.188Z,1516649278.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:58.618Z,1516649278.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:59.039Z,1516649279.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:59.409Z,1516649279.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:27:59.813Z,1516649279.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:00.193Z,1516649280.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:00.660Z,1516649280.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:01.006Z,1516649281.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:01.416Z,1516649281.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:01.810Z,1516649281.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:02.213Z,1516649282.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:02.658Z,1516649282.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:02.996Z,1516649282.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:03.396Z,1516649283.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:03.812Z,1516649283.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:04.200Z,1516649284.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:04.680Z,1516649284.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:05.041Z,1516649285.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:05.418Z,1516649285.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:05.796Z,1516649285.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:06.192Z,1516649286.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:06.665Z,1516649286.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:07.007Z,1516649287.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:07.409Z,1516649287.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:07.809Z,1516649287.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:08.218Z,1516649288.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:08.612Z,1516649288.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:09.008Z,1516649289.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:09.403Z,1516649289.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:09.812Z,1516649289.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:10.200Z,1516649290.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:10.613Z,1516649290.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:11.069Z,1516649291.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:11.415Z,1516649291.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:11.796Z,1516649291.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:12.196Z,1516649292.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:12.596Z,1516649292.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:13.070Z,1516649293.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:13.413Z,1516649293.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:13.811Z,1516649293.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:14.211Z,1516649294.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:14.599Z,1516649294.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:15.019Z,1516649295.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:15.396Z,1516649295.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:15.800Z,1516649295.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:16.196Z,1516649296.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:16.608Z,1516649296.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:17.009Z,1516649297.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:17.410Z,1516649297.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:17.800Z,1516649297.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:18.198Z,1516649298.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:18.597Z,1516649298.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:19.012Z,1516649299.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:19.420Z,1516649299.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:19.816Z,1516649299.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:20.210Z,1516649300.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:20.608Z,1516649300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:20.000Z,1516649301.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:21.392Z,1516649301.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:21.791Z,1516649301.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:22.200Z,1516649302.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:22.606Z,1516649302.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:23.001Z,1516649303.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:23.402Z,1516649303.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:23.794Z,1516649303.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:24.195Z,1516649304.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:24.594Z,1516649304.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:25.064Z,1516649305.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:25.420Z,1516649305.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:25.812Z,1516649305.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:26.210Z,1516649306.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:26.213Z,1516649306.213 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:23:26.0Z
2018-01-22T19:28:26.213Z,1516649306.213 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:28:26.214Z,1516649306.214 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:28:26.612Z,1516649306.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:30.058Z,1516649310.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:30.135Z,1516649310.135 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0028.lzma
2018-01-22T19:28:30.201Z,1516649310.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:30.530Z,1516649310.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:30.897Z,1516649310.897 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0028.lzma.bak
2018-01-22T19:28:30.897Z,1516649310.897 [DataOverHttps](INFO): SBD MOMSN=7751136
2018-01-22T19:28:30.965Z,1516649310.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:31.542Z,1516649311.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:31.732Z,1516649311.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:35.240Z,1516649315.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:35.368Z,1516649315.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:35.744Z,1516649315.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:36.142Z,1516649316.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:36.542Z,1516649316.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:36.942Z,1516649316.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:40.188Z,1516649320.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:40.275Z,1516649320.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:40.280Z,1516649320.280 [DataOverHttps](INFO): Sending 127 bytes from file Logs/20180122T180533/Express0029.lzma
2018-01-22T19:28:40.344Z,1516649320.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:40.686Z,1516649320.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:41.040Z,1516649321.040 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0029.lzma.bak
2018-01-22T19:28:41.041Z,1516649321.041 [DataOverHttps](INFO): SBD MOMSN=7751138
2018-01-22T19:28:41.071Z,1516649321.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:41.134Z,1516649321.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:41.487Z,1516649321.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:41.694Z,1516649321.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:41.697Z,1516649321.697 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:28:41.697Z,1516649321.697 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:28:41.697Z,1516649321.697 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:28:41.904Z,1516649321.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:45.233Z,1516649325.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:45.380Z,1516649325.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:45.729Z,1516649325.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:46.130Z,1516649326.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:46.506Z,1516649326.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:46.897Z,1516649326.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:47.300Z,1516649327.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:47.704Z,1516649327.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:48.099Z,1516649328.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:48.508Z,1516649328.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:48.914Z,1516649328.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:49.310Z,1516649329.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:49.711Z,1516649329.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:50.100Z,1516649330.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:50.508Z,1516649330.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:50.900Z,1516649330.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:51.304Z,1516649331.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:51.720Z,1516649331.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:52.113Z,1516649332.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:52.520Z,1516649332.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:52.900Z,1516649332.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:53.307Z,1516649333.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:53.704Z,1516649333.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:54.104Z,1516649334.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:54.275Z,1516649334.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:54.514Z,1516649334.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:54.955Z,1516649334.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:55.073Z,1516649335.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:55.320Z,1516649335.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:55.483Z,1516649335.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:55.700Z,1516649335.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:56.109Z,1516649336.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:56.279Z,1516649336.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:56.499Z,1516649336.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:56.916Z,1516649336.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:57.075Z,1516649337.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:57.291Z,1516649337.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:57.479Z,1516649337.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:28:57.723Z,1516649337.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:58.124Z,1516649338.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:58.515Z,1516649338.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:58.896Z,1516649338.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:59.299Z,1516649339.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:28:59.699Z,1516649339.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:00.107Z,1516649340.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:00.518Z,1516649340.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:00.912Z,1516649340.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:01.316Z,1516649341.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:01.706Z,1516649341.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:02.281Z,1516649342.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:02.500Z,1516649342.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:02.908Z,1516649342.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:03.303Z,1516649343.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:03.716Z,1516649343.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:04.114Z,1516649344.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:04.513Z,1516649344.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:04.900Z,1516649344.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:05.309Z,1516649345.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:05.712Z,1516649345.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:06.106Z,1516649346.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:06.515Z,1516649346.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:06.917Z,1516649346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:07.324Z,1516649347.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:07.712Z,1516649347.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:08.107Z,1516649348.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:08.299Z,1516649348.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:08.517Z,1516649348.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:08.913Z,1516649348.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:09.097Z,1516649349.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:09.321Z,1516649349.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:09.507Z,1516649349.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:09.716Z,1516649349.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:10.124Z,1516649350.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:10.303Z,1516649350.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:10.529Z,1516649350.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:10.920Z,1516649350.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:11.099Z,1516649351.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:11.297Z,1516649351.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:11.503Z,1516649351.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:11.700Z,1516649351.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:12.104Z,1516649352.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:12.299Z,1516649352.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:12.510Z,1516649352.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:12.906Z,1516649352.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:13.095Z,1516649353.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:13.312Z,1516649353.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:13.499Z,1516649353.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:13.712Z,1516649353.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:14.108Z,1516649354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:14.295Z,1516649354.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:14.499Z,1516649354.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:14.913Z,1516649354.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:15.091Z,1516649355.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:15.306Z,1516649355.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:15.495Z,1516649355.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:15.716Z,1516649355.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:16.117Z,1516649356.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:16.523Z,1516649356.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:16.904Z,1516649356.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:17.316Z,1516649357.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:17.705Z,1516649357.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:18.110Z,1516649358.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:18.519Z,1516649358.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:18.922Z,1516649358.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:19.328Z,1516649359.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:19.699Z,1516649359.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:20.104Z,1516649360.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:20.503Z,1516649360.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:20.900Z,1516649360.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:21.323Z,1516649361.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:21.723Z,1516649361.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:22.106Z,1516649362.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:22.324Z,1516649362.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:22.529Z,1516649362.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:22.908Z,1516649362.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:23.124Z,1516649363.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:23.307Z,1516649363.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:23.527Z,1516649363.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:23.709Z,1516649363.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:24.101Z,1516649364.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:24.326Z,1516649364.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:24.516Z,1516649364.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:24.916Z,1516649364.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:25.119Z,1516649365.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:25.316Z,1516649365.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:25.523Z,1516649365.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:25.715Z,1516649365.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:26.108Z,1516649366.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:26.319Z,1516649366.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:26.506Z,1516649366.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:26.913Z,1516649366.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:27.115Z,1516649367.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:27.311Z,1516649367.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:27.519Z,1516649367.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:27.720Z,1516649367.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:28.119Z,1516649368.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:28.315Z,1516649368.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:28.520Z,1516649368.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:28.903Z,1516649368.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:29.112Z,1516649369.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:29.322Z,1516649369.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:29.515Z,1516649369.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:29.716Z,1516649369.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:30.089Z,1516649370.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x29684 got:0x23068
2018-01-22T19:29:30.117Z,1516649370.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:30.311Z,1516649370.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:30.520Z,1516649370.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:30.926Z,1516649370.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:31.107Z,1516649371.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:31.315Z,1516649371.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:31.511Z,1516649371.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:31.698Z,1516649371.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:32.092Z,1516649372.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:32.520Z,1516649372.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:32.900Z,1516649372.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:33.302Z,1516649373.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:33.723Z,1516649373.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:34.124Z,1516649374.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:34.521Z,1516649374.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:34.944Z,1516649374.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:35.308Z,1516649375.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:35.717Z,1516649375.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:36.105Z,1516649376.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:36.509Z,1516649376.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:36.909Z,1516649376.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:37.335Z,1516649377.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:37.716Z,1516649377.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:38.106Z,1516649378.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:38.343Z,1516649378.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:38.507Z,1516649378.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:38.936Z,1516649378.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:39.139Z,1516649379.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:39.309Z,1516649379.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:39.543Z,1516649379.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:39.721Z,1516649379.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:40.103Z,1516649380.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x33963 got:0x4822
2018-01-22T19:29:40.135Z,1516649380.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:40.340Z,1516649380.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:40.535Z,1516649380.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:40.911Z,1516649380.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:41.135Z,1516649381.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:41.315Z,1516649381.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:41.539Z,1516649381.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:41.716Z,1516649381.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:42.124Z,1516649382.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:42.337Z,1516649382.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:43.131Z,1516649383.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:43.537Z,1516649383.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:29:45.469Z,1516649385.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:45.601Z,1516649385.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:45.955Z,1516649385.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:46.360Z,1516649386.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:46.740Z,1516649386.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:47.142Z,1516649387.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:47.544Z,1516649387.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:47.943Z,1516649387.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:48.343Z,1516649388.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:48.746Z,1516649388.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:49.205Z,1516649389.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:49.543Z,1516649389.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:49.952Z,1516649389.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:50.340Z,1516649390.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:50.758Z,1516649390.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:51.213Z,1516649391.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:51.559Z,1516649391.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:51.940Z,1516649391.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:52.331Z,1516649392.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:52.740Z,1516649392.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:53.143Z,1516649393.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:53.543Z,1516649393.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:53.943Z,1516649393.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:54.342Z,1516649394.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:54.738Z,1516649394.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:55.144Z,1516649395.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:55.536Z,1516649395.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:55.945Z,1516649395.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:56.337Z,1516649396.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:56.859Z,1516649396.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:57.188Z,1516649397.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:57.545Z,1516649397.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:57.938Z,1516649397.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:58.360Z,1516649398.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:58.752Z,1516649398.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:59.138Z,1516649399.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:59.568Z,1516649399.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:29:59.961Z,1516649399.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:00.353Z,1516649400.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:00.740Z,1516649400.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:01.136Z,1516649401.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:01.548Z,1516649401.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:01.946Z,1516649401.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:02.337Z,1516649402.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:02.759Z,1516649402.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:03.235Z,1516649403.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:03.542Z,1516649403.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:03.940Z,1516649403.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:04.368Z,1516649404.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:04.736Z,1516649404.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:05.216Z,1516649405.216 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:30:05.216Z,1516649405.216 [BPC1] Communications Fault, FailCount= 5
2018-01-22T19:30:05.216Z,1516649405.216 [BPC1](ERROR): Communications Fault
2018-01-22T19:30:05.239Z,1516649405.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:05.287Z,1516649405.287 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:30:05.545Z,1516649405.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:05.944Z,1516649405.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:06.350Z,1516649406.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:06.391Z,1516649406.391 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:30:06.392Z,1516649406.392 [BPC1] No Fault, FailCount= 5
2018-01-22T19:30:06.847Z,1516649406.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:07.140Z,1516649407.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:07.548Z,1516649407.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:07.938Z,1516649407.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:08.333Z,1516649408.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:08.760Z,1516649408.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:09.159Z,1516649409.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:09.547Z,1516649409.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:09.948Z,1516649409.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:10.344Z,1516649410.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:10.742Z,1516649410.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:11.152Z,1516649411.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:11.588Z,1516649411.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:11.957Z,1516649411.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:12.359Z,1516649412.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:12.359Z,1516649412.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-01-22T19:30:12.359Z,1516649412.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:30:12.381Z,1516649412.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:30:12.783Z,1516649412.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:30:12.783Z,1516649412.783 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-01-22T19:30:13.135Z,1516649413.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:30:13.136Z,1516649413.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:30:13.136Z,1516649413.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:30:13.137Z,1516649413.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:13.137Z,1516649413.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-01-22T19:30:13.137Z,1516649413.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:30:13.139Z,1516649413.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:13.140Z,1516649413.140 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-01-22T19:30:13.140Z,1516649413.140 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:30:13.152Z,1516649413.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:30:13.152Z,1516649413.152 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:30:13.540Z,1516649413.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:13.552Z,1516649413.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:30:13.552Z,1516649413.552 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-01-22T19:30:13.553Z,1516649413.553 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:30:13.553Z,1516649413.553 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-01-22T19:30:13.945Z,1516649413.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:13.946Z,1516649413.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:30:13.947Z,1516649413.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:30:13.947Z,1516649413.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:30:13.947Z,1516649413.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:30:13.948Z,1516649413.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:30:13.948Z,1516649413.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:30:14.343Z,1516649414.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:14.794Z,1516649414.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:15.155Z,1516649415.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:15.556Z,1516649415.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:15.928Z,1516649415.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:16.328Z,1516649416.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:16.733Z,1516649416.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:17.176Z,1516649417.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:17.560Z,1516649417.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:17.989Z,1516649417.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:18.348Z,1516649418.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:18.743Z,1516649418.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:19.142Z,1516649419.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:19.537Z,1516649419.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:19.942Z,1516649419.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:20.337Z,1516649420.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:20.753Z,1516649420.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:21.156Z,1516649421.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:21.540Z,1516649421.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:21.951Z,1516649421.951 [BPC1](INFO): Initialized
2018-01-22T19:30:21.966Z,1516649421.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:22.335Z,1516649422.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:22.744Z,1516649422.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:23.140Z,1516649423.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:23.543Z,1516649423.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:23.942Z,1516649423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:24.346Z,1516649424.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:24.735Z,1516649424.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:25.134Z,1516649425.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:25.544Z,1516649425.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:25.939Z,1516649425.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:26.343Z,1516649426.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:26.746Z,1516649426.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:27.144Z,1516649427.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:27.542Z,1516649427.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:27.937Z,1516649427.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:28.340Z,1516649428.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:28.740Z,1516649428.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:29.140Z,1516649429.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:29.543Z,1516649429.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:29.950Z,1516649429.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:30.348Z,1516649430.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:30.744Z,1516649430.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:31.128Z,1516649431.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:31.551Z,1516649431.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:31.974Z,1516649431.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:32.342Z,1516649432.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:32.737Z,1516649432.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:33.135Z,1516649433.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:33.546Z,1516649433.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:33.951Z,1516649433.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:34.360Z,1516649434.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:34.746Z,1516649434.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:35.142Z,1516649435.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:35.555Z,1516649435.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:35.958Z,1516649435.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:36.366Z,1516649436.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:36.740Z,1516649436.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:37.141Z,1516649437.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:37.543Z,1516649437.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:37.947Z,1516649437.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:38.344Z,1516649438.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:38.734Z,1516649438.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:39.144Z,1516649439.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:39.547Z,1516649439.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:39.942Z,1516649439.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:40.374Z,1516649440.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:40.740Z,1516649440.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:41.144Z,1516649441.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:41.543Z,1516649441.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:41.940Z,1516649441.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:42.343Z,1516649442.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:45.641Z,1516649445.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:45.772Z,1516649445.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:46.146Z,1516649446.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:46.573Z,1516649446.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:46.946Z,1516649446.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:47.347Z,1516649447.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:47.749Z,1516649447.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:48.145Z,1516649448.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:48.552Z,1516649448.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:48.957Z,1516649448.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:49.360Z,1516649449.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:49.749Z,1516649449.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:50.152Z,1516649450.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:50.560Z,1516649450.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:50.961Z,1516649450.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:51.360Z,1516649451.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:51.732Z,1516649451.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:52.136Z,1516649452.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:52.557Z,1516649452.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:52.967Z,1516649452.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:53.357Z,1516649453.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:53.736Z,1516649453.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:54.137Z,1516649454.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:54.546Z,1516649454.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:54.970Z,1516649454.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:55.346Z,1516649455.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:55.741Z,1516649455.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:56.152Z,1516649456.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:56.548Z,1516649456.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:57.009Z,1516649457.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:57.357Z,1516649457.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:57.749Z,1516649457.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:58.149Z,1516649458.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:58.554Z,1516649458.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:58.953Z,1516649458.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:59.360Z,1516649459.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:30:59.744Z,1516649459.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:00.153Z,1516649460.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:00.556Z,1516649460.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:00.968Z,1516649460.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:01.364Z,1516649461.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:01.752Z,1516649461.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:02.132Z,1516649462.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:02.554Z,1516649462.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:02.977Z,1516649462.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:03.356Z,1516649463.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:03.736Z,1516649463.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:04.141Z,1516649464.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:04.566Z,1516649464.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:05.025Z,1516649465.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:05.362Z,1516649465.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:05.752Z,1516649465.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:06.143Z,1516649466.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:06.543Z,1516649466.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:06.998Z,1516649466.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:07.357Z,1516649467.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:07.758Z,1516649467.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:08.152Z,1516649468.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:08.547Z,1516649468.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:08.995Z,1516649468.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:09.348Z,1516649469.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:09.757Z,1516649469.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:10.157Z,1516649470.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:10.558Z,1516649470.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:10.963Z,1516649470.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:11.348Z,1516649471.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:11.736Z,1516649471.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:12.136Z,1516649472.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:12.548Z,1516649472.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:12.946Z,1516649472.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:13.356Z,1516649473.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:13.753Z,1516649473.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:14.154Z,1516649474.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:14.542Z,1516649474.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:14.942Z,1516649474.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:15.364Z,1516649475.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:15.760Z,1516649475.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:16.163Z,1516649476.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:16.555Z,1516649476.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:17.008Z,1516649477.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:17.350Z,1516649477.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:17.754Z,1516649477.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:18.144Z,1516649478.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:18.549Z,1516649478.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:19.009Z,1516649479.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:19.356Z,1516649479.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:19.772Z,1516649479.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:20.140Z,1516649480.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:20.544Z,1516649480.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:20.997Z,1516649480.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:21.337Z,1516649481.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:21.749Z,1516649481.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:22.152Z,1516649482.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:22.578Z,1516649482.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:23.108Z,1516649483.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:23.331Z,1516649483.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:23.737Z,1516649483.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:24.142Z,1516649484.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:24.536Z,1516649484.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:24.946Z,1516649484.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:25.346Z,1516649485.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:25.746Z,1516649485.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:26.144Z,1516649486.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:26.540Z,1516649486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:26.938Z,1516649486.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:27.358Z,1516649487.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:27.752Z,1516649487.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:28.152Z,1516649488.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:28.556Z,1516649488.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:28.941Z,1516649488.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:29.380Z,1516649489.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:29.744Z,1516649489.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:30.139Z,1516649490.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:30.548Z,1516649490.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:31.014Z,1516649491.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:31.355Z,1516649491.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:31.757Z,1516649491.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:32.132Z,1516649492.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:32.532Z,1516649492.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:33.009Z,1516649493.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:33.336Z,1516649493.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:33.746Z,1516649493.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:34.167Z,1516649494.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:34.570Z,1516649494.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:34.994Z,1516649494.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:35.348Z,1516649495.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:35.748Z,1516649495.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:36.143Z,1516649496.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:36.548Z,1516649496.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:37.010Z,1516649497.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:37.376Z,1516649497.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:37.746Z,1516649497.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:38.136Z,1516649498.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:38.541Z,1516649498.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:38.940Z,1516649498.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:39.341Z,1516649499.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:39.752Z,1516649499.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:40.146Z,1516649500.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:40.552Z,1516649500.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:40.942Z,1516649500.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:41.389Z,1516649501.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:41.756Z,1516649501.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:42.150Z,1516649502.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:42.555Z,1516649502.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:45.907Z,1516649505.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:46.040Z,1516649506.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:46.388Z,1516649506.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:46.794Z,1516649506.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:47.168Z,1516649507.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:47.580Z,1516649507.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:47.989Z,1516649507.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:48.384Z,1516649508.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:48.784Z,1516649508.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:49.171Z,1516649509.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:49.575Z,1516649509.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:49.981Z,1516649509.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:50.380Z,1516649510.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:50.784Z,1516649510.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:51.197Z,1516649511.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:51.589Z,1516649511.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:51.980Z,1516649511.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:52.380Z,1516649512.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:52.784Z,1516649512.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:53.178Z,1516649513.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:53.580Z,1516649513.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:53.986Z,1516649513.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:54.385Z,1516649514.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:54.787Z,1516649514.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:55.184Z,1516649515.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:55.581Z,1516649515.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:55.981Z,1516649515.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:56.380Z,1516649516.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:56.793Z,1516649516.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:57.187Z,1516649517.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:57.604Z,1516649517.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:57.981Z,1516649517.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:58.384Z,1516649518.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:58.784Z,1516649518.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:59.180Z,1516649519.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:59.586Z,1516649519.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:31:59.990Z,1516649519.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:00.389Z,1516649520.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:00.794Z,1516649520.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:01.163Z,1516649521.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:01.568Z,1516649521.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:01.968Z,1516649521.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:02.367Z,1516649522.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:02.805Z,1516649522.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:03.201Z,1516649523.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:03.607Z,1516649523.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:03.980Z,1516649523.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:04.380Z,1516649524.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:04.778Z,1516649524.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:05.179Z,1516649525.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:05.579Z,1516649525.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:05.986Z,1516649525.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:06.392Z,1516649526.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:06.788Z,1516649526.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:07.185Z,1516649527.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:07.581Z,1516649527.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:07.980Z,1516649527.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:08.386Z,1516649528.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:08.790Z,1516649528.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:09.191Z,1516649529.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:09.598Z,1516649529.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:09.981Z,1516649529.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:10.385Z,1516649530.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:10.788Z,1516649530.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:11.192Z,1516649531.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:11.592Z,1516649531.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:11.998Z,1516649531.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:12.393Z,1516649532.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:12.791Z,1516649532.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:13.196Z,1516649533.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:13.569Z,1516649533.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:13.971Z,1516649533.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:14.376Z,1516649534.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:14.800Z,1516649534.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:15.208Z,1516649535.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:15.579Z,1516649535.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:15.975Z,1516649535.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:16.396Z,1516649536.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:16.782Z,1516649536.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:17.202Z,1516649537.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:17.583Z,1516649537.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:17.988Z,1516649537.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:18.394Z,1516649538.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:18.792Z,1516649538.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:19.187Z,1516649539.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:19.584Z,1516649539.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:19.980Z,1516649539.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:20.373Z,1516649540.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:20.800Z,1516649540.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:21.197Z,1516649541.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:21.607Z,1516649541.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:21.974Z,1516649541.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:22.377Z,1516649542.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:22.774Z,1516649542.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:23.177Z,1516649543.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:23.577Z,1516649543.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:23.996Z,1516649543.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:24.381Z,1516649544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:24.780Z,1516649544.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:25.185Z,1516649545.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:25.586Z,1516649545.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:25.977Z,1516649545.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:26.387Z,1516649546.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:26.782Z,1516649546.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:27.190Z,1516649547.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:27.588Z,1516649547.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:27.976Z,1516649547.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:28.375Z,1516649548.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:28.788Z,1516649548.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:29.184Z,1516649549.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:29.581Z,1516649549.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:30.036Z,1516649550.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:30.409Z,1516649550.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:30.941Z,1516649550.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:31.207Z,1516649551.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:31.611Z,1516649551.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:31.993Z,1516649551.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:32.394Z,1516649552.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:32.817Z,1516649552.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:33.235Z,1516649553.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:33.603Z,1516649553.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:33.985Z,1516649553.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:34.405Z,1516649554.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:34.792Z,1516649554.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:35.192Z,1516649555.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:35.612Z,1516649555.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:36.032Z,1516649556.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:36.398Z,1516649556.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:36.801Z,1516649556.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:37.206Z,1516649557.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:37.586Z,1516649557.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:37.981Z,1516649557.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:38.396Z,1516649558.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:38.809Z,1516649558.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:39.223Z,1516649559.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:39.612Z,1516649559.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:40.005Z,1516649560.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:40.408Z,1516649560.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:40.807Z,1516649560.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:41.219Z,1516649561.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:41.614Z,1516649561.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:42.031Z,1516649562.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:42.421Z,1516649562.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:42.824Z,1516649562.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:50.117Z,1516649570.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:50.240Z,1516649570.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:50.590Z,1516649570.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:50.993Z,1516649570.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:51.474Z,1516649571.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:51.783Z,1516649571.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:52.183Z,1516649572.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:52.583Z,1516649572.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:52.990Z,1516649572.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:53.486Z,1516649573.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:53.796Z,1516649573.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:54.188Z,1516649574.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:54.596Z,1516649574.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:54.993Z,1516649574.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:55.400Z,1516649575.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:55.807Z,1516649575.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:56.203Z,1516649576.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:56.608Z,1516649576.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:57.008Z,1516649577.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:57.390Z,1516649577.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:57.788Z,1516649577.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:58.183Z,1516649578.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:58.589Z,1516649578.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:58.944Z,1516649578.944 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T19:32:58.945Z,1516649578.945 [NAL9602] Data Fault, FailCount= 3
2018-01-22T19:32:58.945Z,1516649578.945 [NAL9602](ERROR): Data Fault
2018-01-22T19:32:58.997Z,1516649578.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:59.022Z,1516649579.022 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T19:32:59.352Z,1516649579.352 [NAL9602](INFO): Powering down
2018-01-22T19:32:59.397Z,1516649579.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:32:59.784Z,1516649579.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:00.189Z,1516649580.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:00.203Z,1516649580.203 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:33:00.203Z,1516649580.203 [NAL9602] No Fault, FailCount= 3
2018-01-22T19:33:00.585Z,1516649580.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:00.988Z,1516649580.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:01.389Z,1516649581.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:01.789Z,1516649581.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:02.191Z,1516649582.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:02.587Z,1516649582.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:02.996Z,1516649582.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:03.380Z,1516649583.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:03.784Z,1516649583.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:04.184Z,1516649584.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:04.584Z,1516649584.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:04.980Z,1516649584.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:05.392Z,1516649585.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:05.786Z,1516649585.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:06.183Z,1516649586.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:06.586Z,1516649586.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:06.988Z,1516649586.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:07.390Z,1516649587.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:07.794Z,1516649587.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:08.191Z,1516649588.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:08.591Z,1516649588.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:08.992Z,1516649588.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:09.392Z,1516649589.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:09.793Z,1516649589.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:10.192Z,1516649590.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:10.575Z,1516649590.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:11.011Z,1516649591.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:11.403Z,1516649591.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:11.776Z,1516649591.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:12.188Z,1516649592.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:12.581Z,1516649592.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:12.983Z,1516649592.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:13.381Z,1516649593.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:13.381Z,1516649593.381 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-01-22T19:33:13.381Z,1516649593.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:33:13.395Z,1516649593.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:33:13.816Z,1516649593.816 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:33:13.816Z,1516649593.816 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-01-22T19:33:14.182Z,1516649594.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:33:14.183Z,1516649594.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:33:14.183Z,1516649594.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:33:14.184Z,1516649594.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:14.184Z,1516649594.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-01-22T19:33:14.184Z,1516649594.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:33:14.186Z,1516649594.186 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:14.186Z,1516649594.186 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-01-22T19:33:14.187Z,1516649594.187 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:33:14.199Z,1516649594.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:33:14.199Z,1516649594.199 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:33:14.584Z,1516649594.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:14.595Z,1516649594.595 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:33:14.596Z,1516649594.596 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-01-22T19:33:14.596Z,1516649594.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:33:14.596Z,1516649594.596 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-01-22T19:33:14.986Z,1516649594.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:14.987Z,1516649594.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:33:14.987Z,1516649594.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:33:14.987Z,1516649594.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:33:14.988Z,1516649594.988 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:33:14.988Z,1516649594.988 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:33:14.988Z,1516649594.988 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:33:15.403Z,1516649595.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:15.790Z,1516649595.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:16.192Z,1516649596.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:16.590Z,1516649596.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:16.990Z,1516649596.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:17.393Z,1516649597.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:17.796Z,1516649597.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:18.194Z,1516649598.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:18.608Z,1516649598.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:19.019Z,1516649599.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:19.397Z,1516649599.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:19.787Z,1516649599.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:20.184Z,1516649600.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:20.588Z,1516649600.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:20.991Z,1516649600.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:21.384Z,1516649601.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:21.784Z,1516649601.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:22.191Z,1516649602.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:22.588Z,1516649602.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:22.988Z,1516649602.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:23.384Z,1516649603.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:23.788Z,1516649603.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:24.189Z,1516649604.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:24.590Z,1516649604.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:25.004Z,1516649605.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:25.397Z,1516649605.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:25.800Z,1516649605.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:26.181Z,1516649606.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:26.616Z,1516649606.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:26.982Z,1516649606.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:27.386Z,1516649607.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:27.783Z,1516649607.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:28.186Z,1516649608.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:28.582Z,1516649608.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:28.983Z,1516649608.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:29.356Z,1516649609.356 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:33:29.388Z,1516649609.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:29.781Z,1516649609.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:30.182Z,1516649610.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:30.588Z,1516649610.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:30.981Z,1516649610.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:31.382Z,1516649611.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:31.784Z,1516649611.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:32.182Z,1516649612.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:32.589Z,1516649612.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:32.981Z,1516649612.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:33.384Z,1516649613.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:33.787Z,1516649613.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:34.195Z,1516649614.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:34.582Z,1516649614.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:34.989Z,1516649614.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:35.393Z,1516649615.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:35.781Z,1516649615.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:36.190Z,1516649616.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:36.591Z,1516649616.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:36.984Z,1516649616.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:37.388Z,1516649617.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:37.791Z,1516649617.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:38.183Z,1516649618.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:38.583Z,1516649618.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:38.991Z,1516649618.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:39.388Z,1516649619.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:39.783Z,1516649619.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:40.195Z,1516649620.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:40.544Z,1516649620.544 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:33:40.588Z,1516649620.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:40.988Z,1516649620.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:41.397Z,1516649621.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:41.798Z,1516649621.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:42.196Z,1516649622.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:42.199Z,1516649622.199 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:33:42.200Z,1516649622.200 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:33:42.200Z,1516649622.200 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:33:42.200Z,1516649622.200 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:33:42.596Z,1516649622.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:42.599Z,1516649622.599 [Default:CheckIn:D] Stopped
2018-01-22T19:33:42.599Z,1516649622.599 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:33:42.994Z,1516649622.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:42.997Z,1516649622.997 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.298519 min 
2018-01-22T19:33:42.997Z,1516649622.997 [Default:CheckIn:E] Stopped
2018-01-22T19:33:42.997Z,1516649622.997 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn] Stopped
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn](INFO): Running loop #8
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn] Running Loop=8
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:33:42.998Z,1516649622.998 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:33:47.698Z,1516649627.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:47.820Z,1516649627.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:48.191Z,1516649628.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:48.613Z,1516649628.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:48.991Z,1516649628.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:49.363Z,1516649629.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:49.769Z,1516649629.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:50.170Z,1516649630.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:50.564Z,1516649630.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:50.970Z,1516649630.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:51.399Z,1516649631.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:51.770Z,1516649631.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:52.168Z,1516649632.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:52.568Z,1516649632.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:52.975Z,1516649632.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:53.373Z,1516649633.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:53.768Z,1516649633.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:54.185Z,1516649634.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:54.577Z,1516649634.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:54.995Z,1516649634.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:55.364Z,1516649635.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:55.784Z,1516649635.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:56.171Z,1516649636.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:56.577Z,1516649636.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:56.991Z,1516649636.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:57.377Z,1516649637.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:57.792Z,1516649637.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:58.281Z,1516649638.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:58.572Z,1516649638.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:58.966Z,1516649638.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:59.376Z,1516649639.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:33:59.767Z,1516649639.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:00.183Z,1516649640.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:00.591Z,1516649640.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:00.978Z,1516649640.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:01.380Z,1516649641.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:01.778Z,1516649641.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:02.180Z,1516649642.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:02.580Z,1516649642.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:02.988Z,1516649642.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:03.385Z,1516649643.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:03.793Z,1516649643.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:04.187Z,1516649644.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:04.580Z,1516649644.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:04.960Z,1516649644.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:05.372Z,1516649645.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:05.776Z,1516649645.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:06.176Z,1516649646.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:06.584Z,1516649646.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:06.976Z,1516649646.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:07.366Z,1516649647.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:07.772Z,1516649647.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:08.171Z,1516649648.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:08.570Z,1516649648.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:08.977Z,1516649648.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:09.377Z,1516649649.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:09.777Z,1516649649.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:10.172Z,1516649650.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:10.568Z,1516649650.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:10.969Z,1516649650.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:11.376Z,1516649651.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:11.772Z,1516649651.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:12.181Z,1516649652.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:12.580Z,1516649652.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:12.979Z,1516649652.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:13.372Z,1516649653.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:13.778Z,1516649653.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:14.167Z,1516649654.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:14.570Z,1516649654.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:15.010Z,1516649655.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:15.388Z,1516649655.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:15.775Z,1516649655.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:16.171Z,1516649656.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:16.572Z,1516649656.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:16.972Z,1516649656.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:17.377Z,1516649657.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:17.773Z,1516649657.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:18.179Z,1516649658.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:18.586Z,1516649658.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:18.981Z,1516649658.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:19.373Z,1516649659.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:19.784Z,1516649659.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:20.180Z,1516649660.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:20.557Z,1516649660.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:20.996Z,1516649660.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:21.394Z,1516649661.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:21.779Z,1516649661.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:22.177Z,1516649662.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:22.563Z,1516649662.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:22.965Z,1516649662.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:23.373Z,1516649663.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:23.772Z,1516649663.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:24.196Z,1516649664.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:24.575Z,1516649664.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:24.984Z,1516649664.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:25.379Z,1516649665.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:25.776Z,1516649665.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:26.176Z,1516649666.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:26.576Z,1516649666.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:26.977Z,1516649666.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:27.384Z,1516649667.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:27.792Z,1516649667.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:28.179Z,1516649668.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:28.576Z,1516649668.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:28.984Z,1516649668.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:29.369Z,1516649669.369 [PNI_TCM](ERROR): CRC does not match. Expected:0x33082 got:0x27416
2018-01-22T19:34:29.396Z,1516649669.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:29.773Z,1516649669.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:30.192Z,1516649670.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:30.589Z,1516649670.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:31.010Z,1516649671.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:31.372Z,1516649671.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:31.777Z,1516649671.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:32.184Z,1516649672.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:32.572Z,1516649672.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:32.996Z,1516649672.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:33.392Z,1516649673.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:33.789Z,1516649673.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:34.182Z,1516649674.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:34.570Z,1516649674.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:34.970Z,1516649674.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:35.384Z,1516649675.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:35.757Z,1516649675.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:36.186Z,1516649676.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:36.579Z,1516649676.579 [PNI_TCM](ERROR): CRC does not match. Expected:0x2746 got:0x4837
2018-01-22T19:34:36.600Z,1516649676.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:36.988Z,1516649676.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:37.365Z,1516649677.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:37.765Z,1516649677.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:38.163Z,1516649678.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:38.590Z,1516649678.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:38.993Z,1516649678.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:39.395Z,1516649679.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:39.772Z,1516649679.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:40.188Z,1516649680.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:40.568Z,1516649680.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:40.975Z,1516649680.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:41.400Z,1516649681.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:41.780Z,1516649681.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:42.177Z,1516649682.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:42.579Z,1516649682.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:42.980Z,1516649682.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:43.393Z,1516649683.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:44.819Z,1516649684.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:34:45.617Z,1516649685.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:34:46.051Z,1516649686.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:34:46.649Z,1516649686.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:46.794Z,1516649686.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:47.123Z,1516649687.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:47.552Z,1516649687.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:47.928Z,1516649687.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:48.315Z,1516649688.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:48.718Z,1516649688.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:49.125Z,1516649689.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:49.528Z,1516649689.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:49.932Z,1516649689.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:50.329Z,1516649690.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:50.728Z,1516649690.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:51.132Z,1516649691.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:51.516Z,1516649691.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:51.940Z,1516649691.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:52.340Z,1516649692.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:52.732Z,1516649692.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:53.132Z,1516649693.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:53.532Z,1516649693.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:53.934Z,1516649693.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:54.338Z,1516649694.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:54.722Z,1516649694.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:55.122Z,1516649695.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:55.514Z,1516649695.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:55.922Z,1516649695.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:56.322Z,1516649696.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:56.722Z,1516649696.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:57.114Z,1516649697.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:57.514Z,1516649697.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:57.919Z,1516649697.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:58.328Z,1516649698.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:58.728Z,1516649698.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:59.128Z,1516649699.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:59.520Z,1516649699.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:34:59.914Z,1516649699.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:00.318Z,1516649700.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:00.718Z,1516649700.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:01.129Z,1516649701.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:01.530Z,1516649701.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:01.940Z,1516649701.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:02.316Z,1516649702.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:02.725Z,1516649702.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:03.127Z,1516649703.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:03.521Z,1516649703.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:03.924Z,1516649703.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:04.330Z,1516649704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:04.728Z,1516649704.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:05.129Z,1516649705.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:05.519Z,1516649705.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:05.916Z,1516649705.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:06.316Z,1516649706.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:06.727Z,1516649706.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:07.129Z,1516649707.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:07.536Z,1516649707.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:07.930Z,1516649707.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:08.316Z,1516649708.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:08.716Z,1516649708.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:09.124Z,1516649709.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:09.524Z,1516649709.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:09.915Z,1516649709.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:10.331Z,1516649710.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:10.730Z,1516649710.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:11.130Z,1516649711.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:11.524Z,1516649711.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:11.921Z,1516649711.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:12.322Z,1516649712.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:12.724Z,1516649712.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:12.863Z,1516649712.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:13.131Z,1516649713.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:13.531Z,1516649713.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:13.660Z,1516649713.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:13.952Z,1516649713.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:14.063Z,1516649714.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:14.321Z,1516649714.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:14.733Z,1516649714.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:15.132Z,1516649715.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:15.509Z,1516649715.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:15.912Z,1516649715.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:16.344Z,1516649716.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:16.737Z,1516649716.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:17.144Z,1516649717.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:17.525Z,1516649717.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:17.922Z,1516649717.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:18.320Z,1516649718.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:18.731Z,1516649718.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:19.137Z,1516649719.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:19.536Z,1516649719.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:19.940Z,1516649719.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:20.320Z,1516649720.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:20.726Z,1516649720.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:21.124Z,1516649721.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:21.523Z,1516649721.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:21.920Z,1516649721.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:22.325Z,1516649722.325 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:35:22.325Z,1516649722.325 [BPC1] Communications Fault, FailCount= 6
2018-01-22T19:35:22.325Z,1516649722.325 [BPC1](ERROR): Communications Fault
2018-01-22T19:35:22.332Z,1516649722.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:22.345Z,1516649722.345 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:35:22.741Z,1516649722.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:23.133Z,1516649723.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:23.528Z,1516649723.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:23.541Z,1516649723.541 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:35:23.542Z,1516649723.542 [BPC1] No Fault, FailCount= 6
2018-01-22T19:35:23.976Z,1516649723.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:24.327Z,1516649724.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:24.731Z,1516649724.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:25.130Z,1516649725.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:25.536Z,1516649725.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:25.939Z,1516649725.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:26.324Z,1516649726.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:26.736Z,1516649726.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:26.875Z,1516649726.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:27.110Z,1516649727.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:27.512Z,1516649727.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:27.673Z,1516649727.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:27.936Z,1516649727.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:28.083Z,1516649728.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:28.340Z,1516649728.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:28.717Z,1516649728.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:28.879Z,1516649728.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:29.144Z,1516649729.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:29.518Z,1516649729.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:29.677Z,1516649729.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:29.920Z,1516649729.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:30.083Z,1516649730.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:30.320Z,1516649730.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:30.720Z,1516649730.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:31.118Z,1516649731.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:31.548Z,1516649731.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:31.922Z,1516649731.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:32.313Z,1516649732.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:32.714Z,1516649732.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:33.128Z,1516649733.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:33.517Z,1516649733.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:33.924Z,1516649733.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:34.329Z,1516649734.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:34.728Z,1516649734.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:35.132Z,1516649735.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:35.528Z,1516649735.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:35.916Z,1516649735.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:36.324Z,1516649736.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:36.727Z,1516649736.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:37.128Z,1516649737.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:37.536Z,1516649737.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:37.936Z,1516649737.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:38.316Z,1516649738.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:38.715Z,1516649738.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:39.135Z,1516649739.135 [BPC1](INFO): Initialized
2018-01-22T19:35:39.141Z,1516649739.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:39.522Z,1516649739.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:39.920Z,1516649739.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:40.322Z,1516649740.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:40.722Z,1516649740.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:40.895Z,1516649740.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:41.126Z,1516649741.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:41.514Z,1516649741.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:41.693Z,1516649741.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:41.913Z,1516649741.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:42.107Z,1516649742.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:42.314Z,1516649742.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:42.718Z,1516649742.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:42.903Z,1516649742.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:43.122Z,1516649743.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:43.522Z,1516649743.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:43.703Z,1516649743.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:44.107Z,1516649744.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:46.782Z,1516649746.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:46.817Z,1516649746.817 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:35:46.920Z,1516649746.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:47.268Z,1516649747.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:47.684Z,1516649747.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:48.080Z,1516649748.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:48.484Z,1516649748.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:48.887Z,1516649748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:49.271Z,1516649749.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:49.632Z,1516649749.632 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-01-22T19:35:49.632Z,1516649749.632 [DropWeight] Hardware Fault, FailCount= 1
2018-01-22T19:35:49.632Z,1516649749.632 [DropWeight](ERROR): Hardware Fault
2018-01-22T19:35:49.686Z,1516649749.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:49.720Z,1516649749.720 [CBIT](INFO): Critical error at 20180122T193549
2018-01-22T19:35:49.722Z,1516649749.722 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-01-22T19:35:49.722Z,1516649749.722 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-01-22T19:35:50.079Z,1516649750.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:50.090Z,1516649750.090 [CBIT](INFO): Critical error at 20180122T193549
2018-01-22T19:35:50.476Z,1516649750.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:50.880Z,1516649750.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:51.287Z,1516649751.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:51.685Z,1516649751.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:52.082Z,1516649752.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:52.476Z,1516649752.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:52.884Z,1516649752.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:53.268Z,1516649753.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:53.737Z,1516649753.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:54.080Z,1516649754.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:54.492Z,1516649754.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:54.896Z,1516649754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:54.951Z,1516649754.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:55.272Z,1516649755.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:55.747Z,1516649755.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:55.770Z,1516649755.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:56.072Z,1516649756.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:56.159Z,1516649756.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:35:56.472Z,1516649756.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:56.875Z,1516649756.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:57.281Z,1516649757.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:57.685Z,1516649757.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:58.088Z,1516649758.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:58.488Z,1516649758.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:58.868Z,1516649758.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:59.264Z,1516649759.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:35:59.668Z,1516649759.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:00.102Z,1516649760.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:00.490Z,1516649760.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:00.895Z,1516649760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:01.264Z,1516649761.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:01.668Z,1516649761.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:02.074Z,1516649762.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:02.495Z,1516649762.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:02.894Z,1516649762.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:03.267Z,1516649763.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:03.668Z,1516649763.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:04.094Z,1516649764.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:04.498Z,1516649764.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:04.901Z,1516649764.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:05.268Z,1516649765.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:05.675Z,1516649765.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:06.100Z,1516649766.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:06.484Z,1516649766.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:06.888Z,1516649766.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:07.275Z,1516649767.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:07.674Z,1516649767.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:08.081Z,1516649768.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:08.481Z,1516649768.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:08.890Z,1516649768.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:08.971Z,1516649768.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:36:09.280Z,1516649769.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:09.675Z,1516649769.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:09.767Z,1516649769.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:36:10.083Z,1516649770.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:10.187Z,1516649770.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:36:10.500Z,1516649770.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:10.882Z,1516649770.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:11.276Z,1516649771.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:11.677Z,1516649771.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:12.086Z,1516649772.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:12.487Z,1516649772.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:12.893Z,1516649772.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:13.275Z,1516649773.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:13.678Z,1516649773.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:14.082Z,1516649774.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:14.488Z,1516649774.488 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:14.488Z,1516649774.488 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-01-22T19:36:14.488Z,1516649774.488 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:36:14.502Z,1516649774.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:36:14.903Z,1516649774.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:36:14.903Z,1516649774.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-01-22T19:36:15.283Z,1516649775.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:36:15.283Z,1516649775.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:36:15.284Z,1516649775.284 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:36:15.285Z,1516649775.285 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:15.285Z,1516649775.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-01-22T19:36:15.285Z,1516649775.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:36:15.287Z,1516649775.287 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:15.287Z,1516649775.287 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-01-22T19:36:15.287Z,1516649775.287 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:36:15.298Z,1516649775.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:36:15.299Z,1516649775.299 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:36:15.679Z,1516649775.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:15.699Z,1516649775.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:36:15.699Z,1516649775.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-01-22T19:36:15.699Z,1516649775.699 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:36:15.700Z,1516649775.700 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-01-22T19:36:16.084Z,1516649776.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:16.084Z,1516649776.084 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:36:16.085Z,1516649776.085 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:36:16.085Z,1516649776.085 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:36:16.086Z,1516649776.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:36:16.086Z,1516649776.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:36:16.091Z,1516649776.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:36:16.485Z,1516649776.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:16.888Z,1516649776.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:17.275Z,1516649777.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:17.682Z,1516649777.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:18.091Z,1516649778.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:18.485Z,1516649778.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:18.884Z,1516649778.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:19.275Z,1516649779.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:19.670Z,1516649779.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:20.082Z,1516649780.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:20.486Z,1516649780.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:20.885Z,1516649780.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:21.279Z,1516649781.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:21.673Z,1516649781.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:22.099Z,1516649782.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:22.496Z,1516649782.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:22.884Z,1516649782.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:23.291Z,1516649783.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:23.664Z,1516649783.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:24.074Z,1516649784.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:24.477Z,1516649784.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:24.874Z,1516649784.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:25.264Z,1516649785.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:25.676Z,1516649785.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:26.093Z,1516649786.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:26.485Z,1516649786.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:26.877Z,1516649786.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:27.276Z,1516649787.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:27.672Z,1516649787.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:28.100Z,1516649788.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:28.481Z,1516649788.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:28.874Z,1516649788.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:29.278Z,1516649789.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:29.672Z,1516649789.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:30.074Z,1516649790.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:30.481Z,1516649790.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:30.876Z,1516649790.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:31.274Z,1516649791.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:31.680Z,1516649791.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:32.091Z,1516649792.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:32.480Z,1516649792.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:32.880Z,1516649792.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:33.280Z,1516649793.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:33.673Z,1516649793.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:34.092Z,1516649794.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:34.485Z,1516649794.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:34.887Z,1516649794.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:35.275Z,1516649795.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:35.685Z,1516649795.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:36.090Z,1516649796.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:36.493Z,1516649796.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:36.897Z,1516649796.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:37.268Z,1516649797.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:37.670Z,1516649797.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:38.094Z,1516649798.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:38.477Z,1516649798.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:38.877Z,1516649798.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:39.273Z,1516649799.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:39.669Z,1516649799.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:40.074Z,1516649800.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:40.478Z,1516649800.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:40.900Z,1516649800.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:41.281Z,1516649801.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:41.670Z,1516649801.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:42.076Z,1516649802.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:42.471Z,1516649802.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:42.884Z,1516649802.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:43.278Z,1516649803.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:43.688Z,1516649803.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:46.972Z,1516649806.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:47.103Z,1516649807.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:47.513Z,1516649807.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:47.864Z,1516649807.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:48.264Z,1516649808.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:48.635Z,1516649808.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:49.048Z,1516649809.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:49.448Z,1516649809.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:49.873Z,1516649809.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:50.243Z,1516649810.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:50.637Z,1516649810.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:51.037Z,1516649811.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:51.448Z,1516649811.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:51.873Z,1516649811.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:52.246Z,1516649812.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:52.652Z,1516649812.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:53.048Z,1516649813.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:53.499Z,1516649813.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:53.834Z,1516649813.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:54.236Z,1516649814.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:54.635Z,1516649814.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:55.064Z,1516649815.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:55.508Z,1516649815.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:55.863Z,1516649815.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:56.262Z,1516649816.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:56.636Z,1516649816.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:57.040Z,1516649817.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:57.516Z,1516649817.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:57.833Z,1516649817.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:58.246Z,1516649818.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:58.650Z,1516649818.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:59.042Z,1516649819.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:59.497Z,1516649819.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:36:59.840Z,1516649819.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:00.247Z,1516649820.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:00.640Z,1516649820.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:01.053Z,1516649821.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:01.452Z,1516649821.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:01.860Z,1516649821.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:02.262Z,1516649822.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:02.641Z,1516649822.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:03.045Z,1516649823.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:03.452Z,1516649823.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:03.891Z,1516649823.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:04.250Z,1516649824.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:04.668Z,1516649824.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:05.093Z,1516649825.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:05.449Z,1516649825.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:05.893Z,1516649825.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:06.232Z,1516649826.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:06.631Z,1516649826.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:07.060Z,1516649827.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:07.513Z,1516649827.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:07.862Z,1516649827.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:08.270Z,1516649828.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:08.636Z,1516649828.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:09.040Z,1516649829.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:09.515Z,1516649829.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:09.847Z,1516649829.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:10.260Z,1516649830.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:10.664Z,1516649830.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:11.053Z,1516649831.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:11.503Z,1516649831.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:11.852Z,1516649831.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:12.251Z,1516649832.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:12.652Z,1516649832.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:13.059Z,1516649833.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:13.521Z,1516649833.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:13.853Z,1516649833.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:14.262Z,1516649834.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:14.656Z,1516649834.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:15.035Z,1516649835.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:15.442Z,1516649835.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:15.841Z,1516649835.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:16.254Z,1516649836.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:16.652Z,1516649836.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:17.057Z,1516649837.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:17.451Z,1516649837.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:17.904Z,1516649837.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:18.239Z,1516649838.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:18.649Z,1516649838.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:19.048Z,1516649839.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:19.444Z,1516649839.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:19.912Z,1516649839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:20.248Z,1516649840.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:20.643Z,1516649840.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:21.050Z,1516649841.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:21.447Z,1516649841.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:21.838Z,1516649841.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:22.264Z,1516649842.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:22.661Z,1516649842.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:23.230Z,1516649843.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:23.503Z,1516649843.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:23.841Z,1516649843.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:24.237Z,1516649844.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:24.645Z,1516649844.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:25.046Z,1516649845.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:25.448Z,1516649845.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:25.855Z,1516649845.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:26.258Z,1516649846.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:26.639Z,1516649846.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:27.043Z,1516649847.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:27.446Z,1516649847.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:27.845Z,1516649847.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:28.260Z,1516649848.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:28.659Z,1516649848.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:29.060Z,1516649849.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:29.433Z,1516649849.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:29.833Z,1516649849.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:30.235Z,1516649850.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:30.637Z,1516649850.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:31.040Z,1516649851.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:31.446Z,1516649851.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:31.897Z,1516649851.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:32.247Z,1516649852.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:32.639Z,1516649852.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:33.038Z,1516649853.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:33.439Z,1516649853.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:33.909Z,1516649853.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:34.246Z,1516649854.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:34.646Z,1516649854.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:35.045Z,1516649855.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:35.434Z,1516649855.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:35.844Z,1516649855.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:36.244Z,1516649856.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:36.639Z,1516649856.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:37.040Z,1516649857.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:37.452Z,1516649857.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:37.851Z,1516649857.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:38.257Z,1516649858.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:38.639Z,1516649858.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:39.087Z,1516649859.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:39.447Z,1516649859.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:39.836Z,1516649859.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:40.248Z,1516649860.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:40.653Z,1516649860.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:41.049Z,1516649861.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:41.444Z,1516649861.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:41.857Z,1516649861.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:42.256Z,1516649862.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:42.632Z,1516649862.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:43.036Z,1516649863.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:43.454Z,1516649863.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:43.860Z,1516649863.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:47.119Z,1516649867.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:47.260Z,1516649867.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:47.594Z,1516649867.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:48.000Z,1516649868.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:48.384Z,1516649868.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:48.788Z,1516649868.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:49.215Z,1516649869.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:49.612Z,1516649869.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:49.994Z,1516649869.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:50.383Z,1516649870.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:50.782Z,1516649870.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:51.191Z,1516649871.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:51.624Z,1516649871.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:51.992Z,1516649871.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:52.392Z,1516649872.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:52.787Z,1516649872.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:53.185Z,1516649873.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:53.605Z,1516649873.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:54.006Z,1516649874.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:54.393Z,1516649874.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:54.785Z,1516649874.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:55.182Z,1516649875.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:55.625Z,1516649875.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:55.991Z,1516649875.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:56.394Z,1516649876.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:56.801Z,1516649876.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:57.194Z,1516649877.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:57.649Z,1516649877.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:57.000Z,1516649878.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:58.388Z,1516649878.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:58.792Z,1516649878.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:59.197Z,1516649879.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:37:59.590Z,1516649879.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:00.008Z,1516649880.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:00.394Z,1516649880.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:00.796Z,1516649880.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:01.196Z,1516649881.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:01.596Z,1516649881.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:01.992Z,1516649881.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:02.408Z,1516649882.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:02.804Z,1516649882.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:03.204Z,1516649883.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:03.637Z,1516649883.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:03.992Z,1516649883.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:04.386Z,1516649884.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:04.824Z,1516649884.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:05.183Z,1516649885.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:05.628Z,1516649885.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:06.008Z,1516649886.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:06.395Z,1516649886.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:06.784Z,1516649886.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:07.187Z,1516649887.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:07.617Z,1516649887.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:07.992Z,1516649887.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:08.390Z,1516649888.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:08.790Z,1516649888.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:09.195Z,1516649889.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:09.640Z,1516649889.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:09.992Z,1516649889.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:10.382Z,1516649890.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:10.786Z,1516649890.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:11.188Z,1516649891.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:11.657Z,1516649891.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:12.002Z,1516649892.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:12.394Z,1516649892.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:12.789Z,1516649892.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:13.192Z,1516649893.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:13.589Z,1516649893.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:13.994Z,1516649893.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:14.394Z,1516649894.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:14.808Z,1516649894.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:15.194Z,1516649895.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:15.592Z,1516649895.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:16.004Z,1516649896.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:16.389Z,1516649896.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:16.796Z,1516649896.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:17.189Z,1516649897.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:17.638Z,1516649897.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:18.020Z,1516649898.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:18.396Z,1516649898.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:18.801Z,1516649898.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:19.204Z,1516649899.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:19.656Z,1516649899.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:20.013Z,1516649900.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:20.406Z,1516649900.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:20.806Z,1516649900.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:21.204Z,1516649901.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:21.648Z,1516649901.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:21.975Z,1516649901.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:22.380Z,1516649902.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:22.780Z,1516649902.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:23.181Z,1516649903.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:23.653Z,1516649903.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:24.008Z,1516649904.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:24.407Z,1516649904.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:24.780Z,1516649904.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:25.188Z,1516649905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:25.592Z,1516649905.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:25.981Z,1516649905.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:26.407Z,1516649906.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:26.813Z,1516649906.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:27.190Z,1516649907.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:27.583Z,1516649907.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:28.003Z,1516649908.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:28.383Z,1516649908.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:28.784Z,1516649908.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:29.190Z,1516649909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:29.587Z,1516649909.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:30.039Z,1516649910.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:30.400Z,1516649910.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:30.782Z,1516649910.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:31.186Z,1516649911.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:31.644Z,1516649911.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:31.993Z,1516649911.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:32.398Z,1516649912.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:32.798Z,1516649912.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:33.197Z,1516649913.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:33.640Z,1516649913.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:33.983Z,1516649913.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:34.390Z,1516649914.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:34.795Z,1516649914.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:35.185Z,1516649915.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:35.652Z,1516649915.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:35.998Z,1516649915.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:36.395Z,1516649916.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:36.785Z,1516649916.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:37.192Z,1516649917.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:37.637Z,1516649917.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:37.988Z,1516649917.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:38.415Z,1516649918.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:38.797Z,1516649918.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:39.197Z,1516649919.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:39.584Z,1516649919.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:39.988Z,1516649919.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:40.382Z,1516649920.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:40.791Z,1516649920.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:41.190Z,1516649921.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:41.593Z,1516649921.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:42.049Z,1516649922.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:42.407Z,1516649922.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:42.788Z,1516649922.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:43.187Z,1516649923.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:43.191Z,1516649923.191 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:33:42.0Z
2018-01-22T19:38:43.191Z,1516649923.191 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:38:43.191Z,1516649923.191 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:38:43.587Z,1516649923.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:44.158Z,1516649924.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:47.250Z,1516649927.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:47.331Z,1516649927.331 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180122T180533/Courier0032.lzma
2018-01-22T19:38:47.389Z,1516649927.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:47.755Z,1516649927.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:48.097Z,1516649928.097 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0032.lzma.bak
2018-01-22T19:38:48.097Z,1516649928.097 [DataOverHttps](INFO): SBD MOMSN=7751199
2018-01-22T19:38:48.162Z,1516649928.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:48.785Z,1516649928.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:48.960Z,1516649928.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:52.339Z,1516649932.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:52.488Z,1516649932.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:52.810Z,1516649932.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:53.212Z,1516649933.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:53.613Z,1516649933.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:54.020Z,1516649934.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:57.363Z,1516649937.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:57.439Z,1516649937.439 [DataOverHttps](INFO): Sending 126 bytes from file Logs/20180122T180533/Express0033.lzma
2018-01-22T19:38:57.505Z,1516649937.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:57.846Z,1516649937.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:58.189Z,1516649938.189 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0033.lzma.bak
2018-01-22T19:38:58.189Z,1516649938.189 [DataOverHttps](INFO): SBD MOMSN=7751201
2018-01-22T19:38:58.241Z,1516649938.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:59.010Z,1516649939.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:38:59.014Z,1516649939.014 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:38:59.014Z,1516649939.014 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:38:59.014Z,1516649939.014 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:38:59.159Z,1516649939.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:02.430Z,1516649942.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:02.568Z,1516649942.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:02.914Z,1516649942.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:03.295Z,1516649943.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:03.728Z,1516649943.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:04.094Z,1516649944.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:04.506Z,1516649944.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:05.010Z,1516649945.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:05.324Z,1516649945.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:05.730Z,1516649945.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:06.104Z,1516649946.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:06.495Z,1516649946.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:06.904Z,1516649946.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:07.301Z,1516649947.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:07.769Z,1516649947.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:08.102Z,1516649948.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:08.504Z,1516649948.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:08.893Z,1516649948.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:09.293Z,1516649949.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:09.708Z,1516649949.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:10.104Z,1516649950.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:10.505Z,1516649950.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:10.904Z,1516649950.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:11.312Z,1516649951.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:11.700Z,1516649951.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:12.100Z,1516649952.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:12.495Z,1516649952.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:12.907Z,1516649952.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:13.304Z,1516649953.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:13.741Z,1516649953.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:14.116Z,1516649954.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:14.506Z,1516649954.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:14.894Z,1516649954.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:15.306Z,1516649955.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:15.306Z,1516649955.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-01-22T19:39:15.306Z,1516649955.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:39:15.319Z,1516649955.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:39:15.769Z,1516649955.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:39:15.769Z,1516649955.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-01-22T19:39:16.093Z,1516649956.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:39:16.094Z,1516649956.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:39:16.094Z,1516649956.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:39:16.096Z,1516649956.096 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:16.096Z,1516649956.096 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-01-22T19:39:16.096Z,1516649956.096 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:39:16.097Z,1516649956.097 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:16.098Z,1516649956.098 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-01-22T19:39:16.098Z,1516649956.098 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:39:16.110Z,1516649956.110 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:39:16.110Z,1516649956.110 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:39:16.506Z,1516649956.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:16.517Z,1516649956.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:39:16.517Z,1516649956.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-01-22T19:39:16.518Z,1516649956.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:39:16.518Z,1516649956.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-01-22T19:39:16.909Z,1516649956.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:16.910Z,1516649956.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:39:16.911Z,1516649956.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:39:16.911Z,1516649956.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:39:16.911Z,1516649956.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:39:16.912Z,1516649956.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:39:16.912Z,1516649956.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:39:17.322Z,1516649957.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:17.724Z,1516649957.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:18.100Z,1516649958.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:18.505Z,1516649958.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:18.900Z,1516649958.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:19.308Z,1516649959.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:19.760Z,1516649959.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:20.116Z,1516649960.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:20.506Z,1516649960.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:20.892Z,1516649960.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:21.296Z,1516649961.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:21.748Z,1516649961.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:22.108Z,1516649962.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:22.508Z,1516649962.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:22.903Z,1516649962.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:23.303Z,1516649963.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:23.698Z,1516649963.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:24.109Z,1516649964.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:24.497Z,1516649964.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:24.909Z,1516649964.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:25.308Z,1516649965.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:25.705Z,1516649965.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:26.119Z,1516649966.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:26.508Z,1516649966.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:26.901Z,1516649966.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:27.304Z,1516649967.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:27.760Z,1516649967.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:28.102Z,1516649968.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:28.517Z,1516649968.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:28.918Z,1516649968.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:29.314Z,1516649969.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:29.749Z,1516649969.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:30.098Z,1516649970.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:30.496Z,1516649970.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:30.898Z,1516649970.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:31.299Z,1516649971.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:31.761Z,1516649971.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:32.111Z,1516649972.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:32.523Z,1516649972.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:32.896Z,1516649972.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:33.294Z,1516649973.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:33.751Z,1516649973.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:34.113Z,1516649974.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:34.510Z,1516649974.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:34.913Z,1516649974.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:35.347Z,1516649975.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:35.699Z,1516649975.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:36.112Z,1516649976.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:36.496Z,1516649976.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:36.903Z,1516649976.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:37.296Z,1516649977.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:37.707Z,1516649977.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:38.121Z,1516649978.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:38.504Z,1516649978.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:38.895Z,1516649978.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:39.297Z,1516649979.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:39.695Z,1516649979.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:40.109Z,1516649980.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:40.509Z,1516649980.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:40.909Z,1516649980.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:41.306Z,1516649981.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:41.761Z,1516649981.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:42.092Z,1516649982.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:42.491Z,1516649982.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:42.896Z,1516649982.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:43.291Z,1516649983.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:43.769Z,1516649983.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:44.101Z,1516649984.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:44.502Z,1516649984.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:44.893Z,1516649984.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:45.294Z,1516649985.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:45.763Z,1516649985.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:46.096Z,1516649986.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:46.505Z,1516649986.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:46.910Z,1516649986.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:47.308Z,1516649987.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:47.763Z,1516649987.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:48.106Z,1516649988.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:48.495Z,1516649988.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:48.907Z,1516649988.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:49.295Z,1516649989.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:49.703Z,1516649989.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:50.129Z,1516649990.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:50.506Z,1516649990.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:50.901Z,1516649990.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:51.304Z,1516649991.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:51.701Z,1516649991.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:52.129Z,1516649992.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:52.516Z,1516649992.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:52.911Z,1516649992.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:53.308Z,1516649993.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:53.707Z,1516649993.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:54.135Z,1516649994.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:54.512Z,1516649994.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:54.908Z,1516649994.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:55.292Z,1516649995.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:55.765Z,1516649995.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:56.116Z,1516649996.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:56.518Z,1516649996.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:56.896Z,1516649996.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:57.295Z,1516649997.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:57.788Z,1516649997.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:58.093Z,1516649998.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:58.516Z,1516649998.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:58.912Z,1516649998.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:59.308Z,1516649999.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:39:59.765Z,1516649999.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:02.964Z,1516650002.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:03.115Z,1516650003.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:03.456Z,1516650003.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:03.865Z,1516650003.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:04.242Z,1516650004.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:04.624Z,1516650004.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:05.032Z,1516650005.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:05.440Z,1516650005.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:05.844Z,1516650005.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:06.240Z,1516650006.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:06.638Z,1516650006.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:07.030Z,1516650007.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:07.440Z,1516650007.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:07.839Z,1516650007.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:08.242Z,1516650008.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:08.639Z,1516650008.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:09.032Z,1516650009.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:09.448Z,1516650009.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:09.841Z,1516650009.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:10.242Z,1516650010.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:10.632Z,1516650010.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:11.039Z,1516650011.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:11.442Z,1516650011.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:11.844Z,1516650011.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:12.252Z,1516650012.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:12.637Z,1516650012.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:13.040Z,1516650013.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:13.452Z,1516650013.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:13.848Z,1516650013.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:14.252Z,1516650014.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:14.624Z,1516650014.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:15.028Z,1516650015.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:15.456Z,1516650015.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:15.854Z,1516650015.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:16.238Z,1516650016.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:16.632Z,1516650016.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:17.043Z,1516650017.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:17.440Z,1516650017.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:17.888Z,1516650017.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:18.244Z,1516650018.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:18.641Z,1516650018.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:19.032Z,1516650019.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:19.448Z,1516650019.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:19.855Z,1516650019.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:20.245Z,1516650020.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:20.636Z,1516650020.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:21.040Z,1516650021.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:21.446Z,1516650021.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:21.857Z,1516650021.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:22.234Z,1516650022.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:22.627Z,1516650022.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:23.031Z,1516650023.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:23.456Z,1516650023.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:23.853Z,1516650023.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:24.259Z,1516650024.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:24.636Z,1516650024.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:25.029Z,1516650025.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:25.434Z,1516650025.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:25.863Z,1516650025.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:26.234Z,1516650026.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:26.635Z,1516650026.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:27.030Z,1516650027.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:27.440Z,1516650027.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:27.869Z,1516650027.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:28.236Z,1516650028.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:28.634Z,1516650028.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:29.031Z,1516650029.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:29.436Z,1516650029.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:29.849Z,1516650029.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:30.247Z,1516650030.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:30.631Z,1516650030.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:31.030Z,1516650031.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:31.441Z,1516650031.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:31.897Z,1516650031.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:32.252Z,1516650032.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:32.624Z,1516650032.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:33.024Z,1516650033.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:33.434Z,1516650033.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:33.858Z,1516650033.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:34.236Z,1516650034.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:34.629Z,1516650034.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:35.034Z,1516650035.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:35.430Z,1516650035.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:35.840Z,1516650035.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:36.244Z,1516650036.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:36.640Z,1516650036.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:37.026Z,1516650037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:37.440Z,1516650037.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:37.866Z,1516650037.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:38.229Z,1516650038.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:38.641Z,1516650038.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:39.069Z,1516650039.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:39.434Z,1516650039.434 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:40:39.434Z,1516650039.434 [BPC1] Communications Fault, FailCount= 7
2018-01-22T19:40:39.434Z,1516650039.434 [BPC1](ERROR): Communications Fault
2018-01-22T19:40:39.441Z,1516650039.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:39.467Z,1516650039.467 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:40:39.876Z,1516650039.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:40.240Z,1516650040.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:40.631Z,1516650040.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:40.644Z,1516650040.644 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:40:40.644Z,1516650040.644 [BPC1] No Fault, FailCount= 7
2018-01-22T19:40:41.092Z,1516650041.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:41.426Z,1516650041.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:41.878Z,1516650041.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:42.246Z,1516650042.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:42.641Z,1516650042.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:43.030Z,1516650043.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:43.441Z,1516650043.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:43.865Z,1516650043.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:44.236Z,1516650044.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:44.634Z,1516650044.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:45.047Z,1516650045.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:45.448Z,1516650045.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:45.883Z,1516650045.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:46.238Z,1516650046.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:46.632Z,1516650046.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:47.043Z,1516650047.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:47.431Z,1516650047.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:47.839Z,1516650047.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:48.246Z,1516650048.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:48.640Z,1516650048.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:49.039Z,1516650049.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:49.436Z,1516650049.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:49.830Z,1516650049.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:50.245Z,1516650050.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:50.645Z,1516650050.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:51.044Z,1516650051.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:51.441Z,1516650051.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:51.880Z,1516650051.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:52.247Z,1516650052.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:52.635Z,1516650052.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:53.044Z,1516650053.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:53.428Z,1516650053.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:53.881Z,1516650053.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:54.256Z,1516650054.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:54.648Z,1516650054.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:55.031Z,1516650055.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:55.432Z,1516650055.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:55.870Z,1516650055.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:56.263Z,1516650056.263 [BPC1](INFO): Initialized
2018-01-22T19:40:56.278Z,1516650056.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:56.659Z,1516650056.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:57.047Z,1516650057.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:57.444Z,1516650057.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:57.893Z,1516650057.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:58.239Z,1516650058.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:58.644Z,1516650058.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:59.045Z,1516650059.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:59.444Z,1516650059.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:40:59.909Z,1516650059.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:03.080Z,1516650063.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:03.215Z,1516650063.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:03.572Z,1516650063.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:03.973Z,1516650063.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:04.364Z,1516650064.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:04.754Z,1516650064.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:05.183Z,1516650065.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:05.575Z,1516650065.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:05.980Z,1516650065.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:06.381Z,1516650066.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:06.749Z,1516650066.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:07.159Z,1516650067.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:07.560Z,1516650067.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:07.981Z,1516650067.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:08.366Z,1516650068.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:08.775Z,1516650068.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:09.157Z,1516650069.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:09.569Z,1516650069.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:09.965Z,1516650069.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:10.370Z,1516650070.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:10.760Z,1516650070.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:11.160Z,1516650071.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:11.577Z,1516650071.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:11.970Z,1516650071.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:12.376Z,1516650072.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:12.741Z,1516650072.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:13.140Z,1516650073.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:13.576Z,1516650073.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:13.983Z,1516650073.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:14.368Z,1516650074.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:14.744Z,1516650074.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:15.147Z,1516650075.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:15.551Z,1516650075.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:15.960Z,1516650075.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:16.362Z,1516650076.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:16.748Z,1516650076.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:17.161Z,1516650077.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:17.556Z,1516650077.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:17.960Z,1516650077.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:18.358Z,1516650078.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:18.752Z,1516650078.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:19.151Z,1516650079.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:19.556Z,1516650079.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:19.964Z,1516650079.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:20.376Z,1516650080.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:20.749Z,1516650080.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:21.146Z,1516650081.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:21.564Z,1516650081.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:21.959Z,1516650081.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:22.364Z,1516650082.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:22.750Z,1516650082.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:23.159Z,1516650083.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:23.554Z,1516650083.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:23.964Z,1516650083.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:24.372Z,1516650084.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:24.752Z,1516650084.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:25.177Z,1516650085.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:25.568Z,1516650085.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:26.012Z,1516650086.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:26.363Z,1516650086.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:26.784Z,1516650086.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:27.166Z,1516650087.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:27.577Z,1516650087.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:28.033Z,1516650088.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:28.397Z,1516650088.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:28.783Z,1516650088.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:29.152Z,1516650089.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:29.588Z,1516650089.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:29.962Z,1516650089.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:30.376Z,1516650090.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:30.764Z,1516650090.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:31.157Z,1516650091.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:31.583Z,1516650091.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:31.976Z,1516650091.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:32.365Z,1516650092.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:32.772Z,1516650092.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:33.146Z,1516650093.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:33.586Z,1516650093.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:33.992Z,1516650093.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:34.380Z,1516650094.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:34.754Z,1516650094.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:35.158Z,1516650095.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:35.576Z,1516650095.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:35.979Z,1516650095.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:36.386Z,1516650096.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:36.778Z,1516650096.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:37.196Z,1516650097.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:37.593Z,1516650097.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:38.003Z,1516650098.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:38.377Z,1516650098.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:38.748Z,1516650098.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:39.143Z,1516650099.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:39.558Z,1516650099.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:39.962Z,1516650099.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:40.356Z,1516650100.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:40.755Z,1516650100.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:41.151Z,1516650101.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:41.556Z,1516650101.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:42.032Z,1516650102.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:42.362Z,1516650102.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:42.761Z,1516650102.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:43.155Z,1516650103.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:43.576Z,1516650103.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:43.968Z,1516650103.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:44.362Z,1516650104.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:44.741Z,1516650104.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:45.148Z,1516650105.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:45.572Z,1516650105.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:45.963Z,1516650105.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:46.384Z,1516650106.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:46.754Z,1516650106.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:47.152Z,1516650107.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:47.557Z,1516650107.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:47.998Z,1516650107.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:48.357Z,1516650108.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:48.752Z,1516650108.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:49.160Z,1516650109.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:49.552Z,1516650109.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:49.974Z,1516650109.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:50.372Z,1516650110.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:50.771Z,1516650110.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:51.155Z,1516650111.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:51.556Z,1516650111.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:51.983Z,1516650111.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:52.348Z,1516650112.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:52.767Z,1516650112.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:53.175Z,1516650113.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:53.564Z,1516650113.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:53.999Z,1516650113.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:54.348Z,1516650114.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:54.754Z,1516650114.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:55.154Z,1516650115.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:55.555Z,1516650115.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:56.015Z,1516650116.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:56.364Z,1516650116.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:56.777Z,1516650116.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:57.144Z,1516650117.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:57.544Z,1516650117.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:57.956Z,1516650117.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:58.352Z,1516650118.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:58.750Z,1516650118.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:59.156Z,1516650119.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:59.560Z,1516650119.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:41:59.945Z,1516650119.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:03.389Z,1516650123.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:03.528Z,1516650123.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:03.881Z,1516650123.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:04.266Z,1516650124.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:04.657Z,1516650124.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:05.053Z,1516650125.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:05.459Z,1516650125.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:05.854Z,1516650125.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:06.260Z,1516650126.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:06.665Z,1516650126.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:07.067Z,1516650127.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:07.464Z,1516650127.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:07.867Z,1516650127.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:08.265Z,1516650128.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:08.664Z,1516650128.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:09.067Z,1516650129.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:09.467Z,1516650129.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:09.899Z,1516650129.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:10.275Z,1516650130.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:10.669Z,1516650130.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:11.052Z,1516650131.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:11.452Z,1516650131.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:11.856Z,1516650131.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:12.325Z,1516650132.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:12.664Z,1516650132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:13.061Z,1516650133.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:13.464Z,1516650133.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:13.531Z,1516650133.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:13.864Z,1516650133.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:14.327Z,1516650134.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:14.329Z,1516650134.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:14.660Z,1516650134.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:14.743Z,1516650134.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:15.063Z,1516650135.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:15.456Z,1516650135.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:15.873Z,1516650135.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:16.278Z,1516650136.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:16.278Z,1516650136.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-01-22T19:42:16.278Z,1516650136.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:42:16.291Z,1516650136.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:42:16.679Z,1516650136.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:42:16.679Z,1516650136.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-01-22T19:42:17.065Z,1516650137.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:42:17.066Z,1516650137.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:42:17.066Z,1516650137.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:42:17.067Z,1516650137.067 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:17.067Z,1516650137.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-01-22T19:42:17.067Z,1516650137.067 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:42:17.069Z,1516650137.069 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:17.069Z,1516650137.069 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-01-22T19:42:17.069Z,1516650137.069 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:42:17.081Z,1516650137.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:42:17.082Z,1516650137.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:42:17.472Z,1516650137.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:17.484Z,1516650137.484 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:42:17.484Z,1516650137.484 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-01-22T19:42:17.485Z,1516650137.485 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:42:17.485Z,1516650137.485 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-01-22T19:42:17.872Z,1516650137.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:17.872Z,1516650137.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:42:17.873Z,1516650137.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:42:17.873Z,1516650137.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:42:17.873Z,1516650137.873 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:42:17.874Z,1516650137.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:42:17.874Z,1516650137.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:42:18.279Z,1516650138.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:18.682Z,1516650138.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:19.080Z,1516650139.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:19.461Z,1516650139.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:19.852Z,1516650139.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:20.264Z,1516650140.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:20.660Z,1516650140.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:21.065Z,1516650141.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:21.456Z,1516650141.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:21.864Z,1516650141.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:22.270Z,1516650142.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:22.665Z,1516650142.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:23.061Z,1516650143.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:23.463Z,1516650143.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:23.865Z,1516650143.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:24.261Z,1516650144.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:24.669Z,1516650144.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:25.068Z,1516650145.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:25.468Z,1516650145.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:25.863Z,1516650145.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:26.293Z,1516650146.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:26.658Z,1516650146.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:27.061Z,1516650147.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:27.461Z,1516650147.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:27.856Z,1516650147.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:28.255Z,1516650148.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:28.669Z,1516650148.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:29.068Z,1516650149.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:29.468Z,1516650149.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:29.855Z,1516650149.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:30.253Z,1516650150.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:30.671Z,1516650150.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:31.068Z,1516650151.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:31.468Z,1516650151.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:31.860Z,1516650151.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:32.253Z,1516650152.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:32.676Z,1516650152.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:33.068Z,1516650153.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:33.465Z,1516650153.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:33.855Z,1516650153.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:34.272Z,1516650154.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:34.666Z,1516650154.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:35.069Z,1516650155.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:35.480Z,1516650155.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:35.856Z,1516650155.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:36.262Z,1516650156.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:36.676Z,1516650156.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:37.068Z,1516650157.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:37.466Z,1516650157.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:37.863Z,1516650157.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:38.261Z,1516650158.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:38.665Z,1516650158.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:39.069Z,1516650159.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:39.465Z,1516650159.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:39.865Z,1516650159.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:40.267Z,1516650160.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:40.665Z,1516650160.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:41.069Z,1516650161.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:41.468Z,1516650161.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:41.868Z,1516650161.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:42.252Z,1516650162.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:42.668Z,1516650162.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:43.068Z,1516650163.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:43.465Z,1516650163.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:43.860Z,1516650163.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:44.263Z,1516650164.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:44.666Z,1516650164.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:45.069Z,1516650165.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:45.466Z,1516650165.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:45.865Z,1516650165.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:46.265Z,1516650166.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:46.666Z,1516650166.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:47.077Z,1516650167.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:47.475Z,1516650167.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:47.864Z,1516650167.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:48.264Z,1516650168.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:48.672Z,1516650168.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:49.069Z,1516650169.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:49.473Z,1516650169.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:49.872Z,1516650169.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:50.252Z,1516650170.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:50.666Z,1516650170.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:51.078Z,1516650171.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:51.462Z,1516650171.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:51.852Z,1516650171.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:52.264Z,1516650172.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:52.658Z,1516650172.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:53.061Z,1516650173.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:53.461Z,1516650173.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:53.857Z,1516650173.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:54.258Z,1516650174.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:54.672Z,1516650174.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:55.170Z,1516650175.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:55.466Z,1516650175.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:55.571Z,1516650175.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:55.868Z,1516650175.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:56.256Z,1516650176.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:56.369Z,1516650176.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:56.669Z,1516650176.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:56.791Z,1516650176.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:42:57.083Z,1516650177.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:57.479Z,1516650177.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:57.857Z,1516650177.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:58.256Z,1516650178.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:58.677Z,1516650178.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:59.078Z,1516650179.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:59.474Z,1516650179.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:42:59.854Z,1516650179.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:00.263Z,1516650180.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:03.551Z,1516650183.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:03.704Z,1516650183.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:04.091Z,1516650184.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:04.421Z,1516650184.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:04.817Z,1516650184.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:05.215Z,1516650185.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:05.628Z,1516650185.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:06.023Z,1516650186.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:06.438Z,1516650186.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:06.829Z,1516650186.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:07.221Z,1516650187.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:07.622Z,1516650187.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:08.028Z,1516650188.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:08.450Z,1516650188.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:08.824Z,1516650188.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:09.224Z,1516650189.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:09.626Z,1516650189.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:09.651Z,1516650189.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:10.016Z,1516650190.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:10.447Z,1516650190.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:10.460Z,1516650190.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:10.826Z,1516650190.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:10.859Z,1516650190.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:11.224Z,1516650191.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:11.633Z,1516650191.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:12.094Z,1516650192.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:12.437Z,1516650192.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:12.842Z,1516650192.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:13.221Z,1516650193.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:13.612Z,1516650193.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:14.085Z,1516650194.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:14.415Z,1516650194.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:14.819Z,1516650194.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:15.223Z,1516650195.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:15.624Z,1516650195.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:16.098Z,1516650196.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:16.416Z,1516650196.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:16.822Z,1516650196.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:17.222Z,1516650197.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:17.615Z,1516650197.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:18.078Z,1516650198.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:18.424Z,1516650198.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:18.825Z,1516650198.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:19.215Z,1516650199.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:19.623Z,1516650199.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:20.018Z,1516650200.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:20.415Z,1516650200.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:20.826Z,1516650200.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:21.228Z,1516650201.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:21.625Z,1516650201.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:22.015Z,1516650202.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:22.458Z,1516650202.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:22.807Z,1516650202.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:23.208Z,1516650203.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:23.607Z,1516650203.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:24.035Z,1516650204.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:24.458Z,1516650204.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:24.825Z,1516650204.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:25.213Z,1516650205.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:25.612Z,1516650205.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:26.083Z,1516650206.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:26.424Z,1516650206.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:26.826Z,1516650206.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:27.230Z,1516650207.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:27.622Z,1516650207.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:28.015Z,1516650208.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:28.423Z,1516650208.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:28.815Z,1516650208.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:29.215Z,1516650209.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:29.623Z,1516650209.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:30.091Z,1516650210.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:30.429Z,1516650210.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:30.837Z,1516650210.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:31.215Z,1516650211.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:31.615Z,1516650211.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:32.089Z,1516650212.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:32.432Z,1516650212.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:32.826Z,1516650212.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:33.240Z,1516650213.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:33.625Z,1516650213.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:34.028Z,1516650214.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:34.412Z,1516650214.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:34.838Z,1516650214.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:35.211Z,1516650215.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:35.616Z,1516650215.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:36.022Z,1516650216.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:36.499Z,1516650216.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:36.826Z,1516650216.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:37.220Z,1516650217.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:37.614Z,1516650217.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:38.020Z,1516650218.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:38.477Z,1516650218.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:38.834Z,1516650218.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:39.243Z,1516650219.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:39.622Z,1516650219.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:40.011Z,1516650220.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:40.424Z,1516650220.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:40.811Z,1516650220.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:41.214Z,1516650221.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:41.618Z,1516650221.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:41.976Z,1516650221.976 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T19:43:41.976Z,1516650221.976 [NAL9602] Data Fault, FailCount= 4
2018-01-22T19:43:41.976Z,1516650221.976 [NAL9602](ERROR): Data Fault
2018-01-22T19:43:42.035Z,1516650222.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:42.115Z,1516650222.115 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T19:43:42.376Z,1516650222.376 [NAL9602](INFO): Powering down
2018-01-22T19:43:42.423Z,1516650222.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:42.824Z,1516650222.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:43.214Z,1516650223.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:43.227Z,1516650223.227 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:43:43.227Z,1516650223.227 [NAL9602] No Fault, FailCount= 4
2018-01-22T19:43:43.623Z,1516650223.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:44.013Z,1516650224.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:44.422Z,1516650224.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:44.814Z,1516650224.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:45.216Z,1516650225.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:45.614Z,1516650225.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:46.015Z,1516650226.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:46.432Z,1516650226.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:46.812Z,1516650226.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:47.212Z,1516650227.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:47.612Z,1516650227.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:48.016Z,1516650228.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:48.416Z,1516650228.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:48.816Z,1516650228.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:49.214Z,1516650229.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:49.613Z,1516650229.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:50.013Z,1516650230.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:50.493Z,1516650230.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:50.821Z,1516650230.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:51.214Z,1516650231.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:51.620Z,1516650231.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:51.679Z,1516650231.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:52.016Z,1516650232.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:52.475Z,1516650232.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:52.477Z,1516650232.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:52.824Z,1516650232.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:52.907Z,1516650232.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:43:53.220Z,1516650233.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:53.633Z,1516650233.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:54.020Z,1516650234.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:54.424Z,1516650234.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:54.828Z,1516650234.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:55.208Z,1516650235.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:55.612Z,1516650235.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:56.011Z,1516650236.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:56.421Z,1516650236.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:56.814Z,1516650236.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:57.222Z,1516650237.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:57.614Z,1516650237.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:58.019Z,1516650238.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:58.424Z,1516650238.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:58.824Z,1516650238.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:59.220Z,1516650239.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:59.223Z,1516650239.223 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:43:59.224Z,1516650239.224 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:43:59.224Z,1516650239.224 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:43:59.224Z,1516650239.224 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:43:59.622Z,1516650239.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:43:59.625Z,1516650239.625 [Default:CheckIn:D] Stopped
2018-01-22T19:43:59.625Z,1516650239.625 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:44:00.021Z,1516650240.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:00.024Z,1516650240.024 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.582284 min 
2018-01-22T19:44:00.024Z,1516650240.024 [Default:CheckIn:E] Stopped
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn] Stopped
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn](INFO): Running loop #9
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn] Running Loop=9
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:44:00.025Z,1516650240.025 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:44:00.421Z,1516650240.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:03.663Z,1516650243.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:03.791Z,1516650243.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:04.152Z,1516650244.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:04.564Z,1516650244.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:04.954Z,1516650244.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:05.356Z,1516650245.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:05.683Z,1516650245.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:05.756Z,1516650245.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:06.156Z,1516650246.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:06.481Z,1516650246.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:06.554Z,1516650246.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:06.887Z,1516650246.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:06.955Z,1516650246.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:07.357Z,1516650247.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:07.683Z,1516650247.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:07.753Z,1516650247.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:08.181Z,1516650248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:08.479Z,1516650248.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:08.556Z,1516650248.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:08.883Z,1516650248.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:08.959Z,1516650248.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:09.346Z,1516650249.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:09.744Z,1516650249.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:10.196Z,1516650250.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:10.560Z,1516650250.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:10.946Z,1516650250.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:11.346Z,1516650251.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:11.758Z,1516650251.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:12.205Z,1516650252.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:12.508Z,1516650252.508 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:44:12.550Z,1516650252.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:12.949Z,1516650252.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:13.355Z,1516650253.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:13.755Z,1516650253.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:14.193Z,1516650254.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:14.547Z,1516650254.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:14.946Z,1516650254.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:15.356Z,1516650255.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:15.756Z,1516650255.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:16.216Z,1516650256.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:16.579Z,1516650256.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:16.944Z,1516650256.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:17.352Z,1516650257.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:17.749Z,1516650257.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:18.146Z,1516650258.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:18.554Z,1516650258.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:18.952Z,1516650258.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:19.347Z,1516650259.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:19.727Z,1516650259.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:19.759Z,1516650259.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:20.162Z,1516650260.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:20.524Z,1516650260.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:20.562Z,1516650260.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:20.945Z,1516650260.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:20.955Z,1516650260.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:21.354Z,1516650261.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:21.746Z,1516650261.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:21.751Z,1516650261.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:22.212Z,1516650262.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:22.547Z,1516650262.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:22.564Z,1516650262.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:22.951Z,1516650262.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:44:22.953Z,1516650262.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:23.360Z,1516650263.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:23.708Z,1516650263.708 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:44:23.753Z,1516650263.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:24.205Z,1516650264.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:24.568Z,1516650264.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:24.963Z,1516650264.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:25.360Z,1516650265.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:25.764Z,1516650265.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:26.207Z,1516650266.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:26.545Z,1516650266.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:26.972Z,1516650266.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:27.354Z,1516650267.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:27.779Z,1516650267.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:28.222Z,1516650268.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:28.547Z,1516650268.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:28.956Z,1516650268.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:29.353Z,1516650269.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:29.751Z,1516650269.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:30.145Z,1516650270.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:30.556Z,1516650270.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:30.952Z,1516650270.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:31.360Z,1516650271.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:31.762Z,1516650271.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:32.156Z,1516650272.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:32.564Z,1516650272.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:32.954Z,1516650272.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:33.357Z,1516650273.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:33.752Z,1516650273.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:34.159Z,1516650274.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:34.573Z,1516650274.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:34.958Z,1516650274.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:35.354Z,1516650275.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:35.756Z,1516650275.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:36.196Z,1516650276.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:36.564Z,1516650276.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:36.939Z,1516650276.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:37.368Z,1516650277.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:37.768Z,1516650277.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:38.220Z,1516650278.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:38.572Z,1516650278.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:38.948Z,1516650278.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:39.372Z,1516650279.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:39.744Z,1516650279.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:40.218Z,1516650280.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:40.588Z,1516650280.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:40.951Z,1516650280.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:41.352Z,1516650281.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:41.748Z,1516650281.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:42.209Z,1516650282.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:42.557Z,1516650282.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:42.952Z,1516650282.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:43.358Z,1516650283.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:43.768Z,1516650283.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:44.163Z,1516650284.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:44.560Z,1516650284.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:44.945Z,1516650284.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:45.341Z,1516650285.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:45.748Z,1516650285.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:46.173Z,1516650286.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:46.600Z,1516650286.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:46.958Z,1516650286.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:47.352Z,1516650287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:47.745Z,1516650287.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:48.151Z,1516650288.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:48.591Z,1516650288.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:48.955Z,1516650288.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:49.356Z,1516650289.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:49.753Z,1516650289.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:50.241Z,1516650290.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:50.555Z,1516650290.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:50.957Z,1516650290.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:51.358Z,1516650291.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:51.746Z,1516650291.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:52.219Z,1516650292.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:52.560Z,1516650292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:52.957Z,1516650292.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:53.360Z,1516650293.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:53.755Z,1516650293.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:54.201Z,1516650294.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:54.544Z,1516650294.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:54.948Z,1516650294.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:55.353Z,1516650295.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:55.778Z,1516650295.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:56.246Z,1516650296.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:56.547Z,1516650296.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:56.956Z,1516650296.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:57.358Z,1516650297.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:57.746Z,1516650297.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:58.156Z,1516650298.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:58.571Z,1516650298.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:58.957Z,1516650298.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:59.357Z,1516650299.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:44:59.755Z,1516650299.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:00.140Z,1516650300.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:00.608Z,1516650300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:03.825Z,1516650303.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:03.949Z,1516650303.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:04.329Z,1516650304.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:04.713Z,1516650304.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:05.089Z,1516650305.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:05.490Z,1516650305.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:05.886Z,1516650305.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:06.300Z,1516650306.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:06.708Z,1516650306.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:07.101Z,1516650307.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:07.496Z,1516650307.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:07.897Z,1516650307.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:08.294Z,1516650308.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:08.691Z,1516650308.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:09.108Z,1516650309.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:09.505Z,1516650309.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:09.900Z,1516650309.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:10.291Z,1516650310.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:10.696Z,1516650310.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:11.095Z,1516650311.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:11.496Z,1516650311.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:11.904Z,1516650311.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:12.332Z,1516650312.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:12.716Z,1516650312.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:13.181Z,1516650313.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:13.488Z,1516650313.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:13.888Z,1516650313.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:14.292Z,1516650314.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:14.701Z,1516650314.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:15.100Z,1516650315.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:15.497Z,1516650315.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:15.900Z,1516650315.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:16.290Z,1516650316.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:16.690Z,1516650316.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:17.090Z,1516650317.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:17.090Z,1516650317.090 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-01-22T19:45:17.090Z,1516650317.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:45:17.104Z,1516650317.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:45:17.513Z,1516650317.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:45:17.513Z,1516650317.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-01-22T19:45:17.893Z,1516650317.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:45:17.893Z,1516650317.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:45:17.894Z,1516650317.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:45:17.895Z,1516650317.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:17.895Z,1516650317.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-01-22T19:45:17.895Z,1516650317.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:45:17.897Z,1516650317.897 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:17.897Z,1516650317.897 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-01-22T19:45:17.897Z,1516650317.897 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:45:17.909Z,1516650317.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:45:17.909Z,1516650317.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:45:18.301Z,1516650318.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:18.313Z,1516650318.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:45:18.313Z,1516650318.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-01-22T19:45:18.313Z,1516650318.313 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:45:18.313Z,1516650318.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-01-22T19:45:18.712Z,1516650318.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:18.713Z,1516650318.713 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:45:18.713Z,1516650318.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:45:18.713Z,1516650318.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:45:18.714Z,1516650318.714 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:45:18.714Z,1516650318.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:45:18.715Z,1516650318.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:45:19.101Z,1516650319.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:19.497Z,1516650319.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:19.897Z,1516650319.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:20.301Z,1516650320.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:20.691Z,1516650320.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:21.102Z,1516650321.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:21.505Z,1516650321.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:21.902Z,1516650321.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:22.305Z,1516650322.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:22.703Z,1516650322.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:23.102Z,1516650323.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:23.507Z,1516650323.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:23.922Z,1516650323.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:24.296Z,1516650324.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:24.688Z,1516650324.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:25.104Z,1516650325.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:25.491Z,1516650325.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:25.889Z,1516650325.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:26.381Z,1516650326.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:26.707Z,1516650326.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:27.104Z,1516650327.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:27.494Z,1516650327.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:27.893Z,1516650327.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:28.298Z,1516650328.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:28.693Z,1516650328.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:29.107Z,1516650329.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:29.502Z,1516650329.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:29.908Z,1516650329.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:30.287Z,1516650330.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:30.688Z,1516650330.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:31.119Z,1516650331.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:31.519Z,1516650331.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:31.916Z,1516650331.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:32.338Z,1516650332.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:32.691Z,1516650332.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:33.108Z,1516650333.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:33.504Z,1516650333.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:33.902Z,1516650333.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:34.316Z,1516650334.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:34.696Z,1516650334.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:35.104Z,1516650335.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:35.510Z,1516650335.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:35.908Z,1516650335.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:36.340Z,1516650336.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:36.696Z,1516650336.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:37.110Z,1516650337.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:37.515Z,1516650337.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:37.909Z,1516650337.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:38.316Z,1516650338.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:38.698Z,1516650338.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:39.110Z,1516650339.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:39.521Z,1516650339.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:39.918Z,1516650339.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:40.353Z,1516650340.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:40.700Z,1516650340.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:41.100Z,1516650341.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:41.505Z,1516650341.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:41.900Z,1516650341.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:42.300Z,1516650342.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:42.700Z,1516650342.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:43.101Z,1516650343.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:43.503Z,1516650343.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:43.902Z,1516650343.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:44.303Z,1516650344.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:44.692Z,1516650344.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:45.099Z,1516650345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:45.505Z,1516650345.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:45.900Z,1516650345.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:46.336Z,1516650346.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:46.696Z,1516650346.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:47.108Z,1516650347.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:47.142Z,1516650347.142 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:45:47.503Z,1516650347.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:47.915Z,1516650347.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:48.335Z,1516650348.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:48.700Z,1516650348.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:49.109Z,1516650349.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:49.504Z,1516650349.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:49.905Z,1516650349.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:50.352Z,1516650350.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:50.702Z,1516650350.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:51.099Z,1516650351.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:51.510Z,1516650351.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:51.902Z,1516650351.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:52.337Z,1516650352.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:52.702Z,1516650352.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:53.102Z,1516650353.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:53.512Z,1516650353.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:53.901Z,1516650353.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:54.349Z,1516650354.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:54.712Z,1516650354.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:55.113Z,1516650355.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:55.506Z,1516650355.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:55.904Z,1516650355.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:56.277Z,1516650356.277 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:45:56.277Z,1516650356.277 [BPC1] Communications Fault, FailCount= 8
2018-01-22T19:45:56.278Z,1516650356.278 [BPC1](ERROR): Communications Fault
2018-01-22T19:45:56.285Z,1516650356.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:56.326Z,1516650356.326 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:45:56.713Z,1516650356.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:57.088Z,1516650357.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:57.514Z,1516650357.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:57.528Z,1516650357.528 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:45:57.528Z,1516650357.528 [BPC1] No Fault, FailCount= 8
2018-01-22T19:45:57.960Z,1516650357.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:58.293Z,1516650358.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:58.713Z,1516650358.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:59.086Z,1516650359.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:59.488Z,1516650359.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:45:59.887Z,1516650359.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:00.363Z,1516650360.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:00.708Z,1516650360.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:03.924Z,1516650363.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:04.040Z,1516650364.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:04.400Z,1516650364.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:04.791Z,1516650364.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:05.196Z,1516650365.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:05.593Z,1516650365.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:05.996Z,1516650365.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:06.385Z,1516650366.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:06.796Z,1516650366.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:07.190Z,1516650367.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:07.588Z,1516650367.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:07.996Z,1516650367.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:08.440Z,1516650368.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:08.827Z,1516650368.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:09.196Z,1516650369.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:09.590Z,1516650369.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:09.983Z,1516650369.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:10.388Z,1516650370.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:10.800Z,1516650370.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:11.196Z,1516650371.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:11.604Z,1516650371.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:11.000Z,1516650372.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:12.388Z,1516650372.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:12.793Z,1516650372.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:13.207Z,1516650373.207 [BPC1](INFO): Initialized
2018-01-22T19:46:13.239Z,1516650373.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:13.588Z,1516650373.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:13.998Z,1516650373.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:14.404Z,1516650374.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:14.816Z,1516650374.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:15.189Z,1516650375.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:15.589Z,1516650375.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:15.991Z,1516650375.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:16.397Z,1516650376.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:16.794Z,1516650376.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:17.191Z,1516650377.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:17.600Z,1516650377.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:17.000Z,1516650378.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:18.402Z,1516650378.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:18.790Z,1516650378.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:19.197Z,1516650379.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:19.608Z,1516650379.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:20.005Z,1516650380.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:20.408Z,1516650380.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:20.788Z,1516650380.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:21.193Z,1516650381.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:21.580Z,1516650381.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:21.996Z,1516650381.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:22.440Z,1516650382.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:22.797Z,1516650382.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:23.189Z,1516650383.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:23.596Z,1516650383.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:24.002Z,1516650384.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:24.400Z,1516650384.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:24.790Z,1516650384.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:25.211Z,1516650385.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:25.608Z,1516650385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:26.006Z,1516650386.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:26.393Z,1516650386.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:26.805Z,1516650386.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:27.209Z,1516650387.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:27.614Z,1516650387.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:28.018Z,1516650388.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:28.432Z,1516650388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:28.824Z,1516650388.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:29.217Z,1516650389.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:29.657Z,1516650389.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:30.008Z,1516650390.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:30.449Z,1516650390.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:30.815Z,1516650390.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:31.209Z,1516650391.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:31.620Z,1516650391.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:32.016Z,1516650392.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:32.416Z,1516650392.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:32.839Z,1516650392.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:33.224Z,1516650393.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:33.596Z,1516650393.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:34.030Z,1516650394.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:34.430Z,1516650394.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:34.799Z,1516650394.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:35.208Z,1516650395.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:35.616Z,1516650395.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:36.001Z,1516650396.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:36.433Z,1516650396.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:36.788Z,1516650396.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:37.196Z,1516650397.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:37.593Z,1516650397.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:37.989Z,1516650397.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:38.392Z,1516650398.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:38.800Z,1516650398.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:39.196Z,1516650399.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:39.594Z,1516650399.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:40.017Z,1516650400.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:40.394Z,1516650400.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:40.793Z,1516650400.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:41.206Z,1516650401.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:41.608Z,1516650401.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:42.004Z,1516650402.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:42.433Z,1516650402.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:42.792Z,1516650402.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:43.201Z,1516650403.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:43.600Z,1516650403.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:43.000Z,1516650404.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:44.437Z,1516650404.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:44.798Z,1516650404.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:45.263Z,1516650405.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:45.612Z,1516650405.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:45.998Z,1516650405.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:46.420Z,1516650406.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:46.795Z,1516650406.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:47.282Z,1516650407.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:47.594Z,1516650407.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:47.990Z,1516650407.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:48.439Z,1516650408.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:48.792Z,1516650408.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:49.190Z,1516650409.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:49.594Z,1516650409.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:49.996Z,1516650409.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:50.465Z,1516650410.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:50.785Z,1516650410.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:51.196Z,1516650411.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:51.594Z,1516650411.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:51.990Z,1516650411.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:52.386Z,1516650412.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:52.808Z,1516650412.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:53.200Z,1516650413.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:53.600Z,1516650413.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:54.005Z,1516650414.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:54.389Z,1516650414.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:54.805Z,1516650414.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:55.210Z,1516650415.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:55.599Z,1516650415.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:56.002Z,1516650416.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:56.451Z,1516650416.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:56.796Z,1516650416.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:57.197Z,1516650417.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:57.613Z,1516650417.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:58.007Z,1516650418.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:58.468Z,1516650418.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:58.828Z,1516650418.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:59.220Z,1516650419.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:46:59.635Z,1516650419.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:00.012Z,1516650420.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:00.470Z,1516650420.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:00.837Z,1516650420.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:05.430Z,1516650425.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:05.576Z,1516650425.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:05.908Z,1516650425.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:06.303Z,1516650426.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:06.735Z,1516650426.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:07.093Z,1516650427.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:07.505Z,1516650427.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:07.904Z,1516650427.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:08.303Z,1516650428.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:08.693Z,1516650428.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:09.099Z,1516650429.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:09.503Z,1516650429.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:09.907Z,1516650429.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:10.306Z,1516650430.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:10.714Z,1516650430.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:11.116Z,1516650431.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:11.504Z,1516650431.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:11.913Z,1516650431.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:12.312Z,1516650432.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:12.704Z,1516650432.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:13.098Z,1516650433.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:13.508Z,1516650433.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:13.902Z,1516650433.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:14.298Z,1516650434.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:14.700Z,1516650434.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:15.091Z,1516650435.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:15.502Z,1516650435.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:15.894Z,1516650435.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:16.308Z,1516650436.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:16.709Z,1516650436.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:17.108Z,1516650437.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:17.491Z,1516650437.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:17.893Z,1516650437.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:18.307Z,1516650438.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:18.694Z,1516650438.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:19.093Z,1516650439.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:19.505Z,1516650439.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:19.906Z,1516650439.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:20.304Z,1516650440.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:20.698Z,1516650440.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:21.093Z,1516650441.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:21.495Z,1516650441.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:21.908Z,1516650441.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:22.300Z,1516650442.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:22.707Z,1516650442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:23.098Z,1516650443.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:23.492Z,1516650443.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:23.896Z,1516650443.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:24.290Z,1516650444.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:24.687Z,1516650444.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:25.096Z,1516650445.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:25.498Z,1516650445.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:25.902Z,1516650445.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:26.316Z,1516650446.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:26.700Z,1516650446.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:27.105Z,1516650447.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:27.505Z,1516650447.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:27.908Z,1516650447.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:28.304Z,1516650448.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:28.724Z,1516650448.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:29.110Z,1516650449.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:29.488Z,1516650449.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:29.888Z,1516650449.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:30.307Z,1516650450.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:30.711Z,1516650450.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:31.124Z,1516650451.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:31.493Z,1516650451.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:31.893Z,1516650451.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:32.324Z,1516650452.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:32.723Z,1516650452.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:33.100Z,1516650453.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:33.503Z,1516650453.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:33.903Z,1516650453.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:34.308Z,1516650454.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:34.697Z,1516650454.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:35.109Z,1516650455.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:35.504Z,1516650455.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:35.915Z,1516650455.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:36.313Z,1516650456.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:36.707Z,1516650456.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:37.097Z,1516650457.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:37.496Z,1516650457.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:37.890Z,1516650457.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:38.305Z,1516650458.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:38.708Z,1516650458.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:39.097Z,1516650459.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:39.494Z,1516650459.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:39.900Z,1516650459.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:40.303Z,1516650460.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:40.709Z,1516650460.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:41.108Z,1516650461.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:41.500Z,1516650461.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:41.897Z,1516650461.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:42.302Z,1516650462.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:42.707Z,1516650462.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:43.105Z,1516650463.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:43.500Z,1516650463.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:43.894Z,1516650463.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:44.312Z,1516650464.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:44.712Z,1516650464.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:45.104Z,1516650465.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:45.495Z,1516650465.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:45.896Z,1516650465.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:46.304Z,1516650466.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:46.712Z,1516650466.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:47.100Z,1516650467.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:47.496Z,1516650467.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:47.892Z,1516650467.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:48.310Z,1516650468.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:48.707Z,1516650468.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:49.112Z,1516650469.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:49.495Z,1516650469.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:49.895Z,1516650469.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:50.308Z,1516650470.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:50.712Z,1516650470.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:51.124Z,1516650471.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:51.513Z,1516650471.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:51.892Z,1516650471.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:52.308Z,1516650472.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:52.718Z,1516650472.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:53.112Z,1516650473.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:53.513Z,1516650473.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:53.894Z,1516650473.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:54.298Z,1516650474.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:54.701Z,1516650474.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:55.101Z,1516650475.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:55.496Z,1516650475.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:55.890Z,1516650475.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:56.301Z,1516650476.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:56.726Z,1516650476.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:57.105Z,1516650477.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:57.492Z,1516650477.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:57.900Z,1516650477.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:58.298Z,1516650478.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:58.709Z,1516650478.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:59.104Z,1516650479.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:59.502Z,1516650479.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:47:59.900Z,1516650479.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:00.299Z,1516650480.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:00.713Z,1516650480.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:01.108Z,1516650481.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:04.313Z,1516650484.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:04.456Z,1516650484.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:04.868Z,1516650484.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:05.212Z,1516650485.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:05.616Z,1516650485.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:06.011Z,1516650486.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:06.409Z,1516650486.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:06.818Z,1516650486.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:07.220Z,1516650487.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:07.619Z,1516650487.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:08.020Z,1516650488.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:08.420Z,1516650488.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:08.820Z,1516650488.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:09.212Z,1516650489.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:09.615Z,1516650489.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:10.025Z,1516650490.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:10.421Z,1516650490.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:10.837Z,1516650490.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:11.216Z,1516650491.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:11.606Z,1516650491.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:12.005Z,1516650492.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:12.408Z,1516650492.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:12.814Z,1516650492.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:13.209Z,1516650493.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:13.619Z,1516650493.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:14.034Z,1516650494.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:14.424Z,1516650494.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:14.818Z,1516650494.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:15.212Z,1516650495.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:15.613Z,1516650495.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:16.015Z,1516650496.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:16.420Z,1516650496.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:16.892Z,1516650496.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:17.221Z,1516650497.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:17.617Z,1516650497.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:18.017Z,1516650498.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:18.017Z,1516650498.017 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-01-22T19:48:18.017Z,1516650498.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:48:18.031Z,1516650498.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:48:18.431Z,1516650498.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:48:18.431Z,1516650498.431 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-01-22T19:48:18.845Z,1516650498.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:48:18.846Z,1516650498.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:48:18.860Z,1516650498.860 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:48:18.871Z,1516650498.871 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:18.871Z,1516650498.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-01-22T19:48:18.871Z,1516650498.871 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:48:18.873Z,1516650498.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:18.873Z,1516650498.873 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-01-22T19:48:18.873Z,1516650498.873 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:48:18.910Z,1516650498.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:48:18.910Z,1516650498.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:48:19.204Z,1516650499.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:19.239Z,1516650499.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:48:19.240Z,1516650499.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-01-22T19:48:19.240Z,1516650499.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:48:19.240Z,1516650499.240 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-01-22T19:48:19.634Z,1516650499.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:19.635Z,1516650499.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:48:19.635Z,1516650499.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:48:19.636Z,1516650499.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:48:19.636Z,1516650499.636 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:48:19.636Z,1516650499.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:48:19.637Z,1516650499.637 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:48:20.027Z,1516650500.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:20.430Z,1516650500.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:20.821Z,1516650500.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:21.212Z,1516650501.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:21.621Z,1516650501.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:22.001Z,1516650502.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:22.431Z,1516650502.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:22.836Z,1516650502.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:23.235Z,1516650503.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:23.632Z,1516650503.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:24.004Z,1516650504.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:24.405Z,1516650504.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:24.813Z,1516650504.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:25.213Z,1516650505.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:25.610Z,1516650505.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:26.014Z,1516650506.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:26.409Z,1516650506.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:26.812Z,1516650506.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:27.211Z,1516650507.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:27.606Z,1516650507.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:28.016Z,1516650508.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:28.416Z,1516650508.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:28.813Z,1516650508.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:29.214Z,1516650509.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:29.606Z,1516650509.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:30.014Z,1516650510.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:30.409Z,1516650510.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:30.815Z,1516650510.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:31.214Z,1516650511.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:31.628Z,1516650511.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:32.021Z,1516650512.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:32.426Z,1516650512.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:32.819Z,1516650512.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:33.221Z,1516650513.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:33.624Z,1516650513.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:34.020Z,1516650514.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:34.422Z,1516650514.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:34.827Z,1516650514.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:35.226Z,1516650515.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:35.608Z,1516650515.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:36.008Z,1516650516.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:36.408Z,1516650516.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:36.811Z,1516650516.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:37.208Z,1516650517.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:37.614Z,1516650517.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:38.038Z,1516650518.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:38.410Z,1516650518.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:38.810Z,1516650518.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:39.212Z,1516650519.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:39.607Z,1516650519.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:40.006Z,1516650520.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:40.416Z,1516650520.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:40.813Z,1516650520.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:41.220Z,1516650521.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:41.616Z,1516650521.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:42.018Z,1516650522.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:42.409Z,1516650522.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:42.812Z,1516650522.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:43.205Z,1516650523.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:43.617Z,1516650523.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:44.020Z,1516650524.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:44.420Z,1516650524.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:44.809Z,1516650524.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:45.212Z,1516650525.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:45.607Z,1516650525.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:46.015Z,1516650526.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:46.417Z,1516650526.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:46.820Z,1516650526.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:47.229Z,1516650527.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:47.617Z,1516650527.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:48.036Z,1516650528.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:48.420Z,1516650528.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:48.828Z,1516650528.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:49.228Z,1516650529.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:49.604Z,1516650529.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:50.004Z,1516650530.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:50.428Z,1516650530.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:50.813Z,1516650530.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:51.214Z,1516650531.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:51.604Z,1516650531.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:52.008Z,1516650532.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:52.416Z,1516650532.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:52.813Z,1516650532.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:53.217Z,1516650533.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:53.608Z,1516650533.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:54.007Z,1516650534.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:54.414Z,1516650534.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:54.814Z,1516650534.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:55.244Z,1516650535.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:55.620Z,1516650535.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:56.007Z,1516650536.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:56.424Z,1516650536.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:56.821Z,1516650536.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:57.220Z,1516650537.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:57.617Z,1516650537.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:58.018Z,1516650538.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:58.418Z,1516650538.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:58.821Z,1516650538.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:59.227Z,1516650539.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:48:59.611Z,1516650539.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:00.012Z,1516650540.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:00.418Z,1516650540.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:00.421Z,1516650540.421 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:44:00.0Z
2018-01-22T19:49:00.421Z,1516650540.421 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:49:00.422Z,1516650540.422 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:49:00.820Z,1516650540.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:01.331Z,1516650541.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:04.468Z,1516650544.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:04.600Z,1516650544.600 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0036.lzma
2018-01-22T19:49:04.658Z,1516650544.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:04.948Z,1516650544.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:05.297Z,1516650545.297 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0036.lzma.bak
2018-01-22T19:49:05.297Z,1516650545.297 [DataOverHttps](INFO): SBD MOMSN=7751287
2018-01-22T19:49:05.365Z,1516650545.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:05.985Z,1516650545.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:06.156Z,1516650546.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:09.509Z,1516650549.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:09.618Z,1516650549.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:10.039Z,1516650550.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:10.412Z,1516650550.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:10.950Z,1516650550.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:11.200Z,1516650551.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:14.499Z,1516650554.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:14.586Z,1516650554.586 [DataOverHttps](INFO): Sending 126 bytes from file Logs/20180122T180533/Express0037.lzma
2018-01-22T19:49:14.654Z,1516650554.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:15.011Z,1516650555.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:15.325Z,1516650555.325 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0037.lzma.bak
2018-01-22T19:49:15.325Z,1516650555.325 [DataOverHttps](INFO): SBD MOMSN=7751289
2018-01-22T19:49:15.392Z,1516650555.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:16.080Z,1516650556.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:16.083Z,1516650556.083 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:49:16.083Z,1516650556.083 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:49:16.083Z,1516650556.083 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:49:16.216Z,1516650556.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:19.530Z,1516650559.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:19.672Z,1516650559.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:20.002Z,1516650560.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:20.402Z,1516650560.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:20.799Z,1516650560.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:21.194Z,1516650561.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:21.595Z,1516650561.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:21.998Z,1516650561.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:22.395Z,1516650562.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:22.805Z,1516650562.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:23.210Z,1516650563.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:23.606Z,1516650563.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:24.003Z,1516650564.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:24.401Z,1516650564.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:24.801Z,1516650564.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:25.196Z,1516650565.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:25.605Z,1516650565.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:26.012Z,1516650566.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:26.409Z,1516650566.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:26.805Z,1516650566.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:27.205Z,1516650567.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:27.607Z,1516650567.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:28.013Z,1516650568.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:28.387Z,1516650568.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:28.808Z,1516650568.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:29.209Z,1516650569.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:29.614Z,1516650569.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:30.004Z,1516650570.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:30.396Z,1516650570.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:30.816Z,1516650570.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:31.220Z,1516650571.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:31.602Z,1516650571.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:32.006Z,1516650572.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:32.398Z,1516650572.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:32.800Z,1516650572.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:33.196Z,1516650573.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:33.601Z,1516650573.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:34.055Z,1516650574.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:34.404Z,1516650574.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:34.813Z,1516650574.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:35.211Z,1516650575.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:35.606Z,1516650575.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:36.017Z,1516650576.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:36.406Z,1516650576.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:36.802Z,1516650576.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:37.208Z,1516650577.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:37.617Z,1516650577.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:38.016Z,1516650578.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:38.415Z,1516650578.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:38.808Z,1516650578.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:39.211Z,1516650579.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:39.614Z,1516650579.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:40.015Z,1516650580.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:40.412Z,1516650580.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:40.801Z,1516650580.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:41.206Z,1516650581.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:41.605Z,1516650581.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:42.004Z,1516650582.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:42.187Z,1516650582.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:42.402Z,1516650582.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:42.809Z,1516650582.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:42.985Z,1516650582.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:43.208Z,1516650583.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:43.395Z,1516650583.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:43.605Z,1516650583.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:44.020Z,1516650584.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:44.410Z,1516650584.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:44.797Z,1516650584.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:45.196Z,1516650585.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:45.616Z,1516650585.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:46.127Z,1516650586.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:46.398Z,1516650586.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:46.805Z,1516650586.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:47.219Z,1516650587.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:47.616Z,1516650587.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:48.011Z,1516650588.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:48.399Z,1516650588.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:48.801Z,1516650588.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:49.208Z,1516650589.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:49.638Z,1516650589.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:50.016Z,1516650590.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:50.412Z,1516650590.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:50.806Z,1516650590.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:51.188Z,1516650591.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:51.612Z,1516650591.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:52.012Z,1516650592.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:52.387Z,1516650592.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-22T19:49:52.424Z,1516650592.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:52.828Z,1516650592.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:53.214Z,1516650593.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:53.614Z,1516650593.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:53.997Z,1516650593.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:54.396Z,1516650594.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:54.801Z,1516650594.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:55.206Z,1516650595.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:55.601Z,1516650595.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:56.028Z,1516650596.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:56.215Z,1516650596.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:56.407Z,1516650596.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:56.812Z,1516650596.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:57.013Z,1516650597.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:57.203Z,1516650597.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:57.427Z,1516650597.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:49:57.603Z,1516650597.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:58.013Z,1516650598.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:58.404Z,1516650598.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:58.811Z,1516650598.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:59.216Z,1516650599.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:49:59.614Z,1516650599.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:00.012Z,1516650600.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:00.401Z,1516650600.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:00.809Z,1516650600.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:01.210Z,1516650601.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:01.620Z,1516650601.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:02.012Z,1516650602.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:02.414Z,1516650602.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:02.799Z,1516650602.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:03.213Z,1516650603.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:03.604Z,1516650603.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:04.000Z,1516650604.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:04.400Z,1516650604.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:04.819Z,1516650604.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:05.216Z,1516650605.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:05.614Z,1516650605.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:06.012Z,1516650606.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:06.408Z,1516650606.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:06.811Z,1516650606.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:07.212Z,1516650607.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:07.620Z,1516650607.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:08.021Z,1516650608.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:08.420Z,1516650608.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:08.800Z,1516650608.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:09.220Z,1516650609.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:09.627Z,1516650609.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:09.000Z,1516650610.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:10.231Z,1516650610.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:10.401Z,1516650610.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:10.805Z,1516650610.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:11.028Z,1516650611.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:11.226Z,1516650611.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:11.605Z,1516650611.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:12.004Z,1516650612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:12.411Z,1516650612.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:12.825Z,1516650612.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:13.215Z,1516650613.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:13.616Z,1516650613.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:14.017Z,1516650614.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:14.429Z,1516650614.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:14.805Z,1516650614.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:15.198Z,1516650615.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:15.620Z,1516650615.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:16.037Z,1516650616.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:16.421Z,1516650616.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:16.831Z,1516650616.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:20.076Z,1516650620.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:20.213Z,1516650620.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:20.540Z,1516650620.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:20.948Z,1516650620.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:21.349Z,1516650621.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:21.752Z,1516650621.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:22.149Z,1516650622.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:22.552Z,1516650622.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:22.943Z,1516650622.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:23.354Z,1516650623.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:23.744Z,1516650623.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:24.148Z,1516650624.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:24.263Z,1516650624.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:24.549Z,1516650624.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:24.956Z,1516650624.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:25.060Z,1516650625.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:25.363Z,1516650625.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:25.479Z,1516650625.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:25.752Z,1516650625.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:26.149Z,1516650626.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:26.557Z,1516650626.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:26.957Z,1516650626.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:27.364Z,1516650627.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:27.773Z,1516650627.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:28.187Z,1516650628.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:28.552Z,1516650628.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:28.977Z,1516650628.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:29.375Z,1516650629.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:29.755Z,1516650629.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:30.145Z,1516650630.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:30.556Z,1516650630.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:30.964Z,1516650630.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:31.360Z,1516650631.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:31.752Z,1516650631.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:32.145Z,1516650632.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:32.564Z,1516650632.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:32.959Z,1516650632.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:33.364Z,1516650633.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:33.749Z,1516650633.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:34.156Z,1516650634.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:34.554Z,1516650634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:34.965Z,1516650634.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:35.365Z,1516650635.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:35.736Z,1516650635.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:36.140Z,1516650636.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:36.545Z,1516650636.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:36.969Z,1516650636.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:37.357Z,1516650637.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:37.743Z,1516650637.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:38.142Z,1516650638.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:38.287Z,1516650638.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:38.552Z,1516650638.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:38.949Z,1516650638.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:39.083Z,1516650639.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:39.346Z,1516650639.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:39.487Z,1516650639.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:39.750Z,1516650639.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:40.145Z,1516650640.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:40.552Z,1516650640.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:40.949Z,1516650640.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:41.356Z,1516650641.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:41.746Z,1516650641.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:42.141Z,1516650642.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:42.552Z,1516650642.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:42.955Z,1516650642.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:43.356Z,1516650643.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:43.755Z,1516650643.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:44.151Z,1516650644.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:44.551Z,1516650644.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:44.960Z,1516650644.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:45.356Z,1516650645.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:45.742Z,1516650645.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:46.155Z,1516650646.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:46.543Z,1516650646.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:46.960Z,1516650646.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:47.356Z,1516650647.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:47.756Z,1516650647.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:48.151Z,1516650648.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:48.553Z,1516650648.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:48.950Z,1516650648.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:49.341Z,1516650649.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:49.753Z,1516650649.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:49.767Z,1516650649.767 [CBIT](INFO): Clearing failed state for component DropWeight
2018-01-22T19:50:49.767Z,1516650649.767 [DropWeight] No Fault, FailCount= 1
2018-01-22T19:50:50.155Z,1516650650.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:50.555Z,1516650650.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:50.946Z,1516650650.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:51.343Z,1516650651.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:51.752Z,1516650651.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:52.152Z,1516650652.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:52.303Z,1516650652.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:52.548Z,1516650652.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:52.956Z,1516650652.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:53.101Z,1516650653.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:53.360Z,1516650653.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:53.507Z,1516650653.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:53.756Z,1516650653.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:54.143Z,1516650654.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:54.303Z,1516650654.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:54.552Z,1516650654.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:54.948Z,1516650654.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:55.099Z,1516650655.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:55.343Z,1516650655.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:55.503Z,1516650655.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:50:55.757Z,1516650655.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:56.156Z,1516650656.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:56.556Z,1516650656.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:56.951Z,1516650656.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:57.343Z,1516650657.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:57.753Z,1516650657.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:58.152Z,1516650658.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:58.535Z,1516650658.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:58.962Z,1516650658.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:59.362Z,1516650659.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:50:59.750Z,1516650659.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:00.144Z,1516650660.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:00.544Z,1516650660.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:00.968Z,1516650660.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:01.344Z,1516650661.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:01.754Z,1516650661.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:02.149Z,1516650662.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:02.549Z,1516650662.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:02.952Z,1516650662.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:03.348Z,1516650663.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:03.748Z,1516650663.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:04.145Z,1516650664.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:04.542Z,1516650664.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:04.950Z,1516650664.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:05.378Z,1516650665.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:05.754Z,1516650665.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:06.147Z,1516650666.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:06.324Z,1516650666.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:06.552Z,1516650666.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:06.947Z,1516650666.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:07.121Z,1516650667.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:07.348Z,1516650667.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:07.531Z,1516650667.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:07.762Z,1516650667.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:08.161Z,1516650668.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:08.327Z,1516650668.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:08.554Z,1516650668.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:08.963Z,1516650668.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:09.124Z,1516650669.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:09.356Z,1516650669.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:09.527Z,1516650669.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:09.736Z,1516650669.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:10.137Z,1516650670.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:10.546Z,1516650670.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:10.965Z,1516650670.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:11.368Z,1516650671.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:11.752Z,1516650671.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:12.150Z,1516650672.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:12.556Z,1516650672.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:12.945Z,1516650672.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:13.332Z,1516650673.332 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:51:13.332Z,1516650673.332 [BPC1] Communications Fault, FailCount= 9
2018-01-22T19:51:13.332Z,1516650673.332 [BPC1](ERROR): Communications Fault
2018-01-22T19:51:13.349Z,1516650673.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:13.378Z,1516650673.378 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:51:13.760Z,1516650673.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:14.161Z,1516650674.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:14.557Z,1516650674.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:14.571Z,1516650674.571 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T19:51:14.571Z,1516650674.571 [BPC1] No Fault, FailCount= 9
2018-01-22T19:51:14.988Z,1516650674.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:15.348Z,1516650675.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:15.748Z,1516650675.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:16.154Z,1516650676.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:16.548Z,1516650676.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:16.972Z,1516650676.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:20.194Z,1516650680.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:20.194Z,1516650680.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-01-22T19:51:20.194Z,1516650680.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:51:20.196Z,1516650680.196 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:20.196Z,1516650680.196 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-01-22T19:51:20.196Z,1516650680.196 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:51:20.198Z,1516650680.198 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:20.198Z,1516650680.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-01-22T19:51:20.198Z,1516650680.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:51:20.209Z,1516650680.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:51:20.209Z,1516650680.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:51:20.210Z,1516650680.210 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:51:20.359Z,1516650680.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:20.383Z,1516650680.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:51:20.384Z,1516650680.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-01-22T19:51:20.384Z,1516650680.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:51:20.384Z,1516650680.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-01-22T19:51:20.385Z,1516650680.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:51:20.385Z,1516650680.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-01-22T19:51:20.668Z,1516650680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:51:20.668Z,1516650680.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:51:20.668Z,1516650680.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:51:20.669Z,1516650680.669 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:51:20.669Z,1516650680.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:51:20.670Z,1516650680.670 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:51:20.670Z,1516650680.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:51:20.670Z,1516650680.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:51:20.671Z,1516650680.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:51:21.076Z,1516650681.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:21.155Z,1516650681.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:21.456Z,1516650681.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:21.579Z,1516650681.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:21.885Z,1516650681.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:22.293Z,1516650682.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:22.375Z,1516650682.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:22.669Z,1516650682.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:23.067Z,1516650683.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:23.171Z,1516650683.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:23.472Z,1516650683.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:23.575Z,1516650683.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:23.862Z,1516650683.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:24.264Z,1516650684.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:24.676Z,1516650684.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:25.065Z,1516650685.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:25.469Z,1516650685.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:25.872Z,1516650685.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:26.259Z,1516650686.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:26.661Z,1516650686.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:27.068Z,1516650687.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:27.459Z,1516650687.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:27.869Z,1516650687.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:28.276Z,1516650688.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:28.669Z,1516650688.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:29.068Z,1516650689.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:29.472Z,1516650689.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:29.862Z,1516650689.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:30.279Z,1516650690.279 [BPC1](INFO): Initialized
2018-01-22T19:51:30.298Z,1516650690.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:30.676Z,1516650690.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:31.076Z,1516650691.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:31.472Z,1516650691.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:31.863Z,1516650691.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:32.263Z,1516650692.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:32.672Z,1516650692.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:33.072Z,1516650693.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:33.473Z,1516650693.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:33.864Z,1516650693.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:34.270Z,1516650694.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:34.383Z,1516650694.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:34.676Z,1516650694.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:35.080Z,1516650695.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:35.179Z,1516650695.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:35.496Z,1516650695.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:35.591Z,1516650695.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:35.873Z,1516650695.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:36.273Z,1516650696.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:36.388Z,1516650696.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:36.678Z,1516650696.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:37.077Z,1516650697.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:37.183Z,1516650697.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:37.485Z,1516650697.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:37.587Z,1516650697.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:37.869Z,1516650697.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:38.255Z,1516650698.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:38.678Z,1516650698.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:39.088Z,1516650699.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:39.480Z,1516650699.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:39.876Z,1516650699.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:40.260Z,1516650700.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:40.686Z,1516650700.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:41.069Z,1516650701.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:41.470Z,1516650701.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:41.860Z,1516650701.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:42.261Z,1516650702.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:42.669Z,1516650702.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:43.070Z,1516650703.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:43.469Z,1516650703.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:43.860Z,1516650703.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:44.258Z,1516650704.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:44.670Z,1516650704.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:45.097Z,1516650705.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:45.469Z,1516650705.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:45.862Z,1516650705.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:46.272Z,1516650706.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:46.676Z,1516650706.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:47.070Z,1516650707.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:47.478Z,1516650707.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:47.864Z,1516650707.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:48.261Z,1516650708.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:48.391Z,1516650708.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:48.672Z,1516650708.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:49.076Z,1516650709.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:49.191Z,1516650709.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:49.477Z,1516650709.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:49.595Z,1516650709.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:49.873Z,1516650709.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:50.262Z,1516650710.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:50.391Z,1516650710.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:50.677Z,1516650710.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:51.084Z,1516650711.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:51.187Z,1516650711.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:51.469Z,1516650711.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:51.593Z,1516650711.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:51:51.864Z,1516650711.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:52.272Z,1516650712.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:52.673Z,1516650712.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:53.084Z,1516650713.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:53.477Z,1516650713.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:53.873Z,1516650713.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:54.270Z,1516650714.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:54.689Z,1516650714.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:55.077Z,1516650715.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:55.476Z,1516650715.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:55.869Z,1516650715.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:56.268Z,1516650716.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:56.674Z,1516650716.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:57.073Z,1516650717.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:57.472Z,1516650717.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:57.882Z,1516650717.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:58.279Z,1516650718.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:58.671Z,1516650718.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:59.076Z,1516650719.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:59.476Z,1516650719.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:51:59.881Z,1516650719.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:00.287Z,1516650720.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:00.683Z,1516650720.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:01.074Z,1516650721.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:01.475Z,1516650721.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:01.880Z,1516650721.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:02.256Z,1516650722.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:02.681Z,1516650722.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:03.088Z,1516650723.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:03.481Z,1516650723.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:03.860Z,1516650723.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:04.258Z,1516650724.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:04.415Z,1516650724.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:52:04.664Z,1516650724.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:05.067Z,1516650725.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:05.211Z,1516650725.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:52:05.466Z,1516650725.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:05.615Z,1516650725.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:52:05.870Z,1516650725.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:06.269Z,1516650726.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:06.694Z,1516650726.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:07.061Z,1516650727.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:07.461Z,1516650727.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:07.862Z,1516650727.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:08.261Z,1516650728.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:08.669Z,1516650728.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:09.069Z,1516650729.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:09.469Z,1516650729.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:09.861Z,1516650729.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:10.268Z,1516650730.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:10.661Z,1516650730.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:11.067Z,1516650731.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:11.460Z,1516650731.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:11.875Z,1516650731.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:12.284Z,1516650732.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:12.684Z,1516650732.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:13.063Z,1516650733.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:13.463Z,1516650733.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:13.867Z,1516650733.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:14.268Z,1516650734.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:14.676Z,1516650734.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:15.076Z,1516650735.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:15.473Z,1516650735.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:15.863Z,1516650735.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:16.274Z,1516650736.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:16.664Z,1516650736.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:17.076Z,1516650737.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:20.311Z,1516650740.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:20.458Z,1516650740.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:20.781Z,1516650740.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:21.187Z,1516650741.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:21.583Z,1516650741.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:22.023Z,1516650742.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:22.384Z,1516650742.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:22.800Z,1516650742.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:23.196Z,1516650743.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:23.581Z,1516650743.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:23.992Z,1516650743.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:24.392Z,1516650744.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:24.835Z,1516650744.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:25.197Z,1516650745.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:25.612Z,1516650745.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:26.016Z,1516650746.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:26.386Z,1516650746.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:26.786Z,1516650746.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:27.176Z,1516650747.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:27.577Z,1516650747.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:27.996Z,1516650747.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:28.401Z,1516650748.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:28.804Z,1516650748.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:29.269Z,1516650749.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:29.592Z,1516650749.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:29.997Z,1516650749.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:30.389Z,1516650750.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:30.792Z,1516650750.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:31.181Z,1516650751.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:31.594Z,1516650751.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:31.989Z,1516650751.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:32.399Z,1516650752.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:32.784Z,1516650752.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:33.171Z,1516650753.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:33.567Z,1516650753.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:33.972Z,1516650753.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:34.381Z,1516650754.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:34.782Z,1516650754.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:35.209Z,1516650755.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:35.582Z,1516650755.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:35.974Z,1516650755.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:36.382Z,1516650756.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:36.772Z,1516650756.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:37.180Z,1516650757.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:37.582Z,1516650757.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:37.982Z,1516650757.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:38.381Z,1516650758.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:38.782Z,1516650758.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:39.180Z,1516650759.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:39.583Z,1516650759.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:39.980Z,1516650759.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:40.375Z,1516650760.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:40.788Z,1516650760.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:41.188Z,1516650761.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:41.602Z,1516650761.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:41.992Z,1516650761.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:42.388Z,1516650762.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:42.768Z,1516650762.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:43.172Z,1516650763.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:43.588Z,1516650763.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:43.985Z,1516650763.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:44.388Z,1516650764.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:44.776Z,1516650764.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:45.180Z,1516650765.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:45.585Z,1516650765.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:45.983Z,1516650765.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:46.381Z,1516650766.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:46.846Z,1516650766.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:47.193Z,1516650767.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:47.594Z,1516650767.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:47.969Z,1516650767.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:48.369Z,1516650768.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:48.792Z,1516650768.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:49.166Z,1516650769.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:49.583Z,1516650769.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:49.988Z,1516650769.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:50.384Z,1516650770.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:50.778Z,1516650770.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:51.181Z,1516650771.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:51.581Z,1516650771.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:51.976Z,1516650771.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:52.375Z,1516650772.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:52.786Z,1516650772.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:53.245Z,1516650773.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:53.586Z,1516650773.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:53.972Z,1516650773.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:54.381Z,1516650774.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:54.780Z,1516650774.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:55.174Z,1516650775.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:55.585Z,1516650775.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:55.994Z,1516650775.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:56.392Z,1516650776.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:56.785Z,1516650776.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:57.180Z,1516650777.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:57.592Z,1516650777.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:57.976Z,1516650777.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:58.376Z,1516650778.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:58.782Z,1516650778.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:59.205Z,1516650779.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:59.582Z,1516650779.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:52:59.978Z,1516650779.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:00.379Z,1516650780.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:00.783Z,1516650780.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:01.180Z,1516650781.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:01.592Z,1516650781.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:01.989Z,1516650781.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:02.390Z,1516650782.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:02.776Z,1516650782.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:03.180Z,1516650783.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:03.576Z,1516650783.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:03.985Z,1516650783.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:04.379Z,1516650784.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:04.794Z,1516650784.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:05.196Z,1516650785.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:05.589Z,1516650785.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:05.982Z,1516650785.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:06.382Z,1516650786.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:06.788Z,1516650786.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:07.176Z,1516650787.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:07.586Z,1516650787.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:07.989Z,1516650787.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:08.389Z,1516650788.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:08.782Z,1516650788.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:09.179Z,1516650789.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:09.582Z,1516650789.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:09.976Z,1516650789.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:10.384Z,1516650790.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:10.790Z,1516650790.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:11.190Z,1516650791.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:11.590Z,1516650791.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:11.984Z,1516650791.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:12.380Z,1516650792.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:12.776Z,1516650792.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:13.184Z,1516650793.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:13.593Z,1516650793.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:13.994Z,1516650793.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:14.397Z,1516650794.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:14.776Z,1516650794.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:15.204Z,1516650795.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:15.576Z,1516650795.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:15.980Z,1516650795.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:16.376Z,1516650796.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:16.801Z,1516650796.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:17.181Z,1516650797.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:20.497Z,1516650800.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:20.624Z,1516650800.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:21.015Z,1516650801.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:21.376Z,1516650801.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:21.765Z,1516650801.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:22.172Z,1516650802.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:22.577Z,1516650802.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:22.975Z,1516650802.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:23.388Z,1516650803.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:23.768Z,1516650803.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:24.192Z,1516650804.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:24.571Z,1516650804.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:24.969Z,1516650804.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:25.390Z,1516650805.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:25.780Z,1516650805.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:26.178Z,1516650806.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:26.578Z,1516650806.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:26.971Z,1516650806.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:27.400Z,1516650807.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:27.757Z,1516650807.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:28.155Z,1516650808.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:28.580Z,1516650808.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:29.050Z,1516650809.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:29.382Z,1516650809.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:29.764Z,1516650809.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:30.164Z,1516650810.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:30.564Z,1516650810.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:31.041Z,1516650811.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:31.360Z,1516650811.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:31.769Z,1516650811.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:32.192Z,1516650812.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:32.565Z,1516650812.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:33.028Z,1516650813.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:33.371Z,1516650813.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:33.760Z,1516650813.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:34.172Z,1516650814.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:34.584Z,1516650814.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:35.038Z,1516650815.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:35.376Z,1516650815.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:35.773Z,1516650815.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:36.169Z,1516650816.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:36.578Z,1516650816.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:36.980Z,1516650816.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:37.386Z,1516650817.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:37.776Z,1516650817.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:38.160Z,1516650818.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:38.556Z,1516650818.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:38.960Z,1516650818.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:39.393Z,1516650819.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:39.772Z,1516650819.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:40.171Z,1516650820.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:40.572Z,1516650820.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:40.971Z,1516650820.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:41.406Z,1516650821.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:41.772Z,1516650821.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:42.175Z,1516650822.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:42.587Z,1516650822.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:43.046Z,1516650823.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:43.380Z,1516650823.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:43.780Z,1516650823.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:44.157Z,1516650824.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:44.591Z,1516650824.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:45.044Z,1516650825.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:45.374Z,1516650825.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:45.769Z,1516650825.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:46.166Z,1516650826.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:46.590Z,1516650826.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:47.037Z,1516650827.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:47.383Z,1516650827.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:47.776Z,1516650827.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:48.168Z,1516650828.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:48.581Z,1516650828.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:49.051Z,1516650829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:49.370Z,1516650829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:49.764Z,1516650829.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:50.166Z,1516650830.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:50.571Z,1516650830.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:50.976Z,1516650830.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:51.384Z,1516650831.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:51.772Z,1516650831.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:52.176Z,1516650832.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:52.581Z,1516650832.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:52.976Z,1516650832.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:53.418Z,1516650833.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:53.757Z,1516650833.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:54.160Z,1516650834.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:54.585Z,1516650834.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:54.989Z,1516650834.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:55.420Z,1516650835.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:55.767Z,1516650835.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:56.166Z,1516650836.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:56.576Z,1516650836.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:56.970Z,1516650836.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:57.384Z,1516650837.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:57.774Z,1516650837.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:58.163Z,1516650838.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:58.577Z,1516650838.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:58.976Z,1516650838.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:59.379Z,1516650839.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:53:59.768Z,1516650839.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:00.155Z,1516650840.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:00.588Z,1516650840.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:01.012Z,1516650841.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:01.370Z,1516650841.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:01.763Z,1516650841.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:02.200Z,1516650842.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:02.570Z,1516650842.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:02.969Z,1516650842.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:03.382Z,1516650843.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:03.764Z,1516650843.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:04.164Z,1516650844.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:04.582Z,1516650844.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:04.976Z,1516650844.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:05.375Z,1516650845.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:05.776Z,1516650845.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:06.172Z,1516650846.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:06.576Z,1516650846.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:06.981Z,1516650846.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:07.463Z,1516650847.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:07.780Z,1516650847.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:08.167Z,1516650848.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:08.564Z,1516650848.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:08.973Z,1516650848.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:09.428Z,1516650849.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:09.784Z,1516650849.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:10.184Z,1516650850.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:10.589Z,1516650850.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:10.976Z,1516650850.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:11.370Z,1516650851.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:11.788Z,1516650851.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:12.176Z,1516650852.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:12.576Z,1516650852.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:12.967Z,1516650852.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:13.374Z,1516650853.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:13.776Z,1516650853.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:14.157Z,1516650854.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:14.556Z,1516650854.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:14.985Z,1516650854.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:15.390Z,1516650855.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:15.774Z,1516650855.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:16.161Z,1516650856.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:16.567Z,1516650856.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:16.570Z,1516650856.570 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T19:54:16.570Z,1516650856.570 [Default:CheckIn:C.Wait] Stopped
2018-01-22T19:54:16.570Z,1516650856.570 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T19:54:16.575Z,1516650856.575 [Default:CheckIn:D] Running Loop=1
2018-01-22T19:54:16.971Z,1516650856.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:16.979Z,1516650856.979 [Default:CheckIn:D] Stopped
2018-01-22T19:54:16.979Z,1516650856.979 [Default:CheckIn:E] Running Loop=1
2018-01-22T19:54:17.377Z,1516650857.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:17.380Z,1516650857.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.871436 min 
2018-01-22T19:54:17.380Z,1516650857.380 [Default:CheckIn:E] Stopped
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn] Stopped
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn](INFO): Running loop #10
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn] Running Loop=10
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T19:54:17.381Z,1516650857.381 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T19:54:20.721Z,1516650860.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:20.721Z,1516650860.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-01-22T19:54:20.721Z,1516650860.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:54:20.724Z,1516650860.724 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:20.724Z,1516650860.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-01-22T19:54:20.724Z,1516650860.724 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:54:20.726Z,1516650860.726 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:20.726Z,1516650860.726 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-01-22T19:54:20.726Z,1516650860.726 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:54:20.738Z,1516650860.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:54:20.738Z,1516650860.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:54:20.738Z,1516650860.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:54:20.898Z,1516650860.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:54:20.898Z,1516650860.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-01-22T19:54:20.903Z,1516650860.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:54:20.903Z,1516650860.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-01-22T19:54:20.904Z,1516650860.904 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:54:20.904Z,1516650860.904 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-01-22T19:54:21.219Z,1516650861.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:54:21.220Z,1516650861.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:54:21.220Z,1516650861.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:54:21.221Z,1516650861.221 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:54:21.221Z,1516650861.221 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:54:21.221Z,1516650861.221 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:54:21.222Z,1516650861.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:54:21.222Z,1516650861.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:54:21.222Z,1516650861.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:54:21.602Z,1516650861.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:21.999Z,1516650861.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:22.399Z,1516650862.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:22.823Z,1516650862.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:23.205Z,1516650863.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:23.604Z,1516650863.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:24.002Z,1516650864.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:24.421Z,1516650864.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:24.802Z,1516650864.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:25.201Z,1516650865.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:25.553Z,1516650865.553 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T19:54:25.553Z,1516650865.553 [NAL9602] Data Fault, FailCount= 5
2018-01-22T19:54:25.553Z,1516650865.553 [NAL9602](ERROR): Data Fault
2018-01-22T19:54:25.610Z,1516650865.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:25.635Z,1516650865.635 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T19:54:25.635Z,1516650865.635 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-22T19:54:25.956Z,1516650865.956 [NAL9602](INFO): Powering down
2018-01-22T19:54:26.023Z,1516650866.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:26.043Z,1516650866.043 [CBIT](INFO): Critical error at 20180122T195425
2018-01-22T19:54:26.400Z,1516650866.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:26.798Z,1516650866.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:27.201Z,1516650867.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:27.612Z,1516650867.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:28.006Z,1516650868.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:28.399Z,1516650868.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:28.805Z,1516650868.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:29.230Z,1516650869.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:29.597Z,1516650869.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:30.008Z,1516650870.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:30.397Z,1516650870.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:30.800Z,1516650870.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:31.192Z,1516650871.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:31.607Z,1516650871.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:31.998Z,1516650871.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:32.392Z,1516650872.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:32.790Z,1516650872.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:33.213Z,1516650873.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:33.605Z,1516650873.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:33.990Z,1516650873.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:34.390Z,1516650874.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:34.792Z,1516650874.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:35.196Z,1516650875.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:35.590Z,1516650875.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:36.021Z,1516650876.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:36.390Z,1516650876.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:36.791Z,1516650876.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:37.206Z,1516650877.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:37.599Z,1516650877.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:37.997Z,1516650877.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:38.409Z,1516650878.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:38.801Z,1516650878.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:39.200Z,1516650879.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:39.591Z,1516650879.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:40.005Z,1516650880.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:40.383Z,1516650880.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:40.787Z,1516650880.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:41.224Z,1516650881.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:41.588Z,1516650881.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:41.997Z,1516650881.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:42.392Z,1516650882.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:42.799Z,1516650882.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:43.190Z,1516650883.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:43.600Z,1516650883.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:43.999Z,1516650883.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:44.399Z,1516650884.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:44.793Z,1516650884.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:45.193Z,1516650885.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:45.604Z,1516650885.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:46.002Z,1516650886.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:46.414Z,1516650886.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:46.796Z,1516650886.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:47.217Z,1516650887.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:47.597Z,1516650887.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:48.019Z,1516650888.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:48.388Z,1516650888.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:48.789Z,1516650888.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:49.201Z,1516650889.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:49.595Z,1516650889.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:49.996Z,1516650889.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:50.394Z,1516650890.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:50.787Z,1516650890.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:51.200Z,1516650891.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:51.600Z,1516650891.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:52.000Z,1516650892.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:52.391Z,1516650892.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:52.801Z,1516650892.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:53.189Z,1516650893.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:53.599Z,1516650893.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:53.993Z,1516650893.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:54.400Z,1516650894.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:54.791Z,1516650894.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:55.196Z,1516650895.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:55.595Z,1516650895.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:55.996Z,1516650895.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:56.399Z,1516650896.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:56.792Z,1516650896.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:57.194Z,1516650897.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:57.600Z,1516650897.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:57.997Z,1516650897.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:58.396Z,1516650898.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:58.798Z,1516650898.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:59.206Z,1516650899.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:54:59.596Z,1516650899.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:00.003Z,1516650900.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:00.400Z,1516650900.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:00.816Z,1516650900.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:01.227Z,1516650901.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:01.601Z,1516650901.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:02.001Z,1516650902.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:02.402Z,1516650902.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:02.801Z,1516650902.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:03.200Z,1516650903.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:03.582Z,1516650903.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:04.004Z,1516650904.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:04.388Z,1516650904.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:04.788Z,1516650904.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:05.188Z,1516650905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:05.588Z,1516650905.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:05.992Z,1516650905.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:06.392Z,1516650906.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:06.787Z,1516650906.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:07.193Z,1516650907.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:07.587Z,1516650907.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:07.996Z,1516650907.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:08.392Z,1516650908.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:08.792Z,1516650908.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:09.220Z,1516650909.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:09.596Z,1516650909.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:10.021Z,1516650910.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:10.396Z,1516650910.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:10.794Z,1516650910.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:11.223Z,1516650911.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:11.588Z,1516650911.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:11.989Z,1516650911.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:12.394Z,1516650912.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:12.789Z,1516650912.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:13.212Z,1516650913.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:13.591Z,1516650913.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:13.991Z,1516650913.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:14.395Z,1516650914.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:14.796Z,1516650914.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:15.274Z,1516650915.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:15.602Z,1516650915.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:16.001Z,1516650916.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:16.400Z,1516650916.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:16.802Z,1516650916.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:17.201Z,1516650917.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:17.601Z,1516650917.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:20.848Z,1516650920.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:20.976Z,1516650920.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:21.328Z,1516650921.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:21.721Z,1516650921.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:22.124Z,1516650922.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:22.518Z,1516650922.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:22.917Z,1516650922.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:23.313Z,1516650923.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:23.720Z,1516650923.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:24.117Z,1516650924.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:24.522Z,1516650924.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:24.917Z,1516650924.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:25.323Z,1516650925.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:25.719Z,1516650925.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:26.119Z,1516650926.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:26.520Z,1516650926.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:26.928Z,1516650926.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:27.344Z,1516650927.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:27.722Z,1516650927.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:28.121Z,1516650928.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:28.532Z,1516650928.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:28.912Z,1516650928.912 [PNI_TCM](ERROR): CRC does not match. Expected:0x7006 got:0x16672
2018-01-22T19:55:28.940Z,1516650928.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:29.326Z,1516650929.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:29.718Z,1516650929.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:30.136Z,1516650930.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:30.514Z,1516650930.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x1594 got:0x7361
2018-01-22T19:55:30.540Z,1516650930.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:30.916Z,1516650930.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:31.324Z,1516650931.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:31.727Z,1516650931.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:32.127Z,1516650932.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:32.526Z,1516650932.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:32.925Z,1516650932.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:33.325Z,1516650933.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:33.724Z,1516650933.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:34.124Z,1516650934.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:34.524Z,1516650934.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:34.944Z,1516650934.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:35.328Z,1516650935.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:35.732Z,1516650935.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:36.128Z,1516650936.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:36.536Z,1516650936.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:36.931Z,1516650936.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:37.332Z,1516650937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:37.732Z,1516650937.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:38.141Z,1516650938.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:38.528Z,1516650938.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:38.921Z,1516650938.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:39.324Z,1516650939.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:39.736Z,1516650939.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:40.125Z,1516650940.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:40.529Z,1516650940.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:40.929Z,1516650940.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:41.335Z,1516650941.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:41.723Z,1516650941.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:42.125Z,1516650942.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:42.522Z,1516650942.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:42.931Z,1516650942.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:43.329Z,1516650943.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:43.721Z,1516650943.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:44.132Z,1516650944.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:44.538Z,1516650944.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:44.936Z,1516650944.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:45.330Z,1516650945.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:45.713Z,1516650945.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:46.160Z,1516650946.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:46.531Z,1516650946.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:46.920Z,1516650946.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:47.321Z,1516650947.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:47.334Z,1516650947.334 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T19:55:47.749Z,1516650947.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:48.120Z,1516650948.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:48.521Z,1516650948.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:48.929Z,1516650948.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:49.312Z,1516650949.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:49.731Z,1516650949.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:50.120Z,1516650950.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:50.532Z,1516650950.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:50.915Z,1516650950.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:51.320Z,1516650951.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:51.731Z,1516650951.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:52.121Z,1516650952.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:52.515Z,1516650952.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:52.922Z,1516650952.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:53.314Z,1516650953.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:53.721Z,1516650953.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:54.127Z,1516650954.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:54.514Z,1516650954.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:54.914Z,1516650954.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:55.324Z,1516650955.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:55.714Z,1516650955.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:56.114Z,1516650956.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:56.522Z,1516650956.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:56.935Z,1516650956.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:57.332Z,1516650957.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:57.724Z,1516650957.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:58.123Z,1516650958.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:58.531Z,1516650958.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:58.928Z,1516650958.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:59.312Z,1516650959.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:55:59.711Z,1516650959.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:00.110Z,1516650960.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:00.510Z,1516650960.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:00.910Z,1516650960.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:01.310Z,1516650961.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:01.718Z,1516650961.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:02.110Z,1516650962.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:02.514Z,1516650962.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:02.914Z,1516650962.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:03.320Z,1516650963.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:03.713Z,1516650963.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:04.113Z,1516650964.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:04.514Z,1516650964.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:04.923Z,1516650964.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:05.313Z,1516650965.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:05.712Z,1516650965.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:06.113Z,1516650966.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:06.512Z,1516650966.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:06.918Z,1516650966.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:07.325Z,1516650967.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:07.723Z,1516650967.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:08.114Z,1516650968.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:08.521Z,1516650968.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:08.923Z,1516650968.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:09.320Z,1516650969.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:09.728Z,1516650969.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:10.114Z,1516650970.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:10.514Z,1516650970.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:10.922Z,1516650970.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:11.346Z,1516650971.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:11.721Z,1516650971.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:12.122Z,1516650972.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:12.528Z,1516650972.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:12.925Z,1516650972.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:13.327Z,1516650973.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:13.726Z,1516650973.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:14.125Z,1516650974.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:14.527Z,1516650974.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:14.926Z,1516650974.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:15.325Z,1516650975.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:15.727Z,1516650975.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:16.127Z,1516650976.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:16.528Z,1516650976.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:16.932Z,1516650976.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:17.336Z,1516650977.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:17.724Z,1516650977.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:20.987Z,1516650980.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:21.135Z,1516650981.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:21.449Z,1516650981.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:21.860Z,1516650981.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:22.250Z,1516650982.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:22.659Z,1516650982.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:23.054Z,1516650983.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:23.457Z,1516650983.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:23.860Z,1516650983.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:24.252Z,1516650984.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:24.651Z,1516650984.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:25.050Z,1516650985.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:25.457Z,1516650985.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:25.860Z,1516650985.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:25.886Z,1516650985.886 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T19:56:25.886Z,1516650985.886 [NAL9602] No Fault, FailCount= 5
2018-01-22T19:56:26.212Z,1516650986.212 [NAL9602](INFO): Powering up NAL9602
2018-01-22T19:56:26.266Z,1516650986.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:26.659Z,1516650986.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:27.052Z,1516650987.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:27.443Z,1516650987.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:27.848Z,1516650987.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:28.252Z,1516650988.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:28.652Z,1516650988.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:29.052Z,1516650989.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:29.456Z,1516650989.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:29.860Z,1516650989.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:30.256Z,1516650990.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:30.642Z,1516650990.642 [BPC1](ERROR): Failed to receive battery data
2018-01-22T19:56:30.642Z,1516650990.642 [BPC1] Communications Fault, FailCount= 10
2018-01-22T19:56:30.642Z,1516650990.642 [BPC1](ERROR): Communications Fault
2018-01-22T19:56:30.650Z,1516650990.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:30.687Z,1516650990.687 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T19:56:30.687Z,1516650990.687 [CBIT](CRITICAL): Communications Fault in component: BPC1
2018-01-22T19:56:31.059Z,1516650991.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:31.070Z,1516650991.070 [CBIT](INFO): Critical error at 20180122T195630
2018-01-22T19:56:31.456Z,1516650991.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:31.856Z,1516650991.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:32.259Z,1516650992.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:32.655Z,1516650992.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:33.052Z,1516650993.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:33.464Z,1516650993.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:33.851Z,1516650993.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:34.258Z,1516650994.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:34.660Z,1516650994.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:35.052Z,1516650995.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:35.457Z,1516650995.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:35.855Z,1516650995.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:36.254Z,1516650996.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:36.672Z,1516650996.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:37.012Z,1516650997.012 [NAL9602](INFO): NAL9602 initialized
2018-01-22T19:56:37.056Z,1516650997.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:37.457Z,1516650997.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:37.869Z,1516650997.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:38.272Z,1516650998.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:38.675Z,1516650998.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:39.062Z,1516650999.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:39.465Z,1516650999.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:39.865Z,1516650999.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:40.263Z,1516651000.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:40.664Z,1516651000.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:41.077Z,1516651001.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:41.484Z,1516651001.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:41.924Z,1516651001.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:42.272Z,1516651002.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:42.675Z,1516651002.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:43.062Z,1516651003.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:43.452Z,1516651003.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:43.918Z,1516651003.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:44.292Z,1516651004.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:44.672Z,1516651004.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:45.057Z,1516651005.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:45.469Z,1516651005.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:45.864Z,1516651005.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:46.261Z,1516651006.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:46.669Z,1516651006.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:47.074Z,1516651007.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:47.472Z,1516651007.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:47.880Z,1516651007.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:48.299Z,1516651008.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:48.651Z,1516651008.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:49.057Z,1516651009.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:49.460Z,1516651009.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:49.865Z,1516651009.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:50.260Z,1516651010.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:50.668Z,1516651010.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:51.055Z,1516651011.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:51.456Z,1516651011.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:51.864Z,1516651011.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:52.257Z,1516651012.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:52.655Z,1516651012.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:53.066Z,1516651013.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:53.464Z,1516651013.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:53.876Z,1516651013.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:54.257Z,1516651014.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:54.659Z,1516651014.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:55.057Z,1516651015.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:55.460Z,1516651015.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:55.864Z,1516651015.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:56.268Z,1516651016.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:56.672Z,1516651016.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:57.059Z,1516651017.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:57.453Z,1516651017.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:57.858Z,1516651017.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:58.260Z,1516651018.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:58.657Z,1516651018.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:59.083Z,1516651019.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:59.461Z,1516651019.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:56:59.884Z,1516651019.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:00.253Z,1516651020.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:00.656Z,1516651020.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:01.052Z,1516651021.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:01.472Z,1516651021.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:01.857Z,1516651021.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x56222 got:0x41361
2018-01-22T19:57:01.884Z,1516651021.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:02.260Z,1516651022.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:02.661Z,1516651022.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:03.061Z,1516651023.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:03.449Z,1516651023.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:03.851Z,1516651023.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:04.256Z,1516651024.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:04.729Z,1516651024.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:05.060Z,1516651025.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:05.472Z,1516651025.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:05.876Z,1516651025.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:06.292Z,1516651026.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:06.664Z,1516651026.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:07.072Z,1516651027.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:07.464Z,1516651027.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:07.875Z,1516651027.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:08.276Z,1516651028.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:08.683Z,1516651028.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:09.067Z,1516651029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:09.469Z,1516651029.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:09.884Z,1516651029.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:10.266Z,1516651030.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:10.642Z,1516651030.642 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2018-01-22T19:57:10.663Z,1516651030.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:11.088Z,1516651031.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:11.465Z,1516651031.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x6166 got:0x15131
2018-01-22T19:57:11.492Z,1516651031.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:11.918Z,1516651031.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:12.269Z,1516651032.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:12.665Z,1516651032.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:13.076Z,1516651033.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:13.468Z,1516651033.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:13.880Z,1516651033.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:14.284Z,1516651034.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:14.676Z,1516651034.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:15.043Z,1516651035.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:15.449Z,1516651035.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:15.852Z,1516651035.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:16.251Z,1516651036.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:16.652Z,1516651036.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:17.061Z,1516651037.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:17.483Z,1516651037.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:17.858Z,1516651037.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:21.137Z,1516651041.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:21.283Z,1516651041.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:21.284Z,1516651041.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-01-22T19:57:21.284Z,1516651041.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T19:57:21.285Z,1516651041.285 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:21.285Z,1516651041.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-01-22T19:57:21.286Z,1516651041.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T19:57:21.287Z,1516651041.287 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:21.288Z,1516651041.288 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-01-22T19:57:21.288Z,1516651041.288 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T19:57:21.299Z,1516651041.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T19:57:21.299Z,1516651041.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T19:57:21.300Z,1516651041.300 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T19:57:21.639Z,1516651041.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T19:57:21.640Z,1516651041.640 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-01-22T19:57:21.640Z,1516651041.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T19:57:21.640Z,1516651041.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-01-22T19:57:21.641Z,1516651041.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T19:57:21.641Z,1516651041.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-01-22T19:57:22.027Z,1516651042.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T19:57:22.027Z,1516651042.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:57:22.028Z,1516651042.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:57:22.028Z,1516651042.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T19:57:22.028Z,1516651042.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:57:22.029Z,1516651042.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:57:22.029Z,1516651042.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T19:57:22.029Z,1516651042.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T19:57:22.030Z,1516651042.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T19:57:22.421Z,1516651042.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:22.816Z,1516651042.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:23.197Z,1516651043.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:23.600Z,1516651043.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:24.018Z,1516651044.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:24.413Z,1516651044.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:24.816Z,1516651044.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:24.923Z,1516651044.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:25.204Z,1516651045.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:25.606Z,1516651045.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:25.719Z,1516651045.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:26.017Z,1516651046.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:26.127Z,1516651046.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:26.404Z,1516651046.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:26.827Z,1516651046.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:27.221Z,1516651047.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:27.612Z,1516651047.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:28.044Z,1516651048.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:28.404Z,1516651048.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:28.804Z,1516651048.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:29.212Z,1516651049.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:29.616Z,1516651049.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:30.028Z,1516651050.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:30.417Z,1516651050.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:30.818Z,1516651050.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:31.207Z,1516651051.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:31.619Z,1516651051.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:32.016Z,1516651052.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:32.400Z,1516651052.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:32.821Z,1516651052.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:33.229Z,1516651053.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:33.632Z,1516651053.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:34.008Z,1516651054.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:34.408Z,1516651054.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:34.802Z,1516651054.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:35.203Z,1516651055.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:35.616Z,1516651055.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:36.020Z,1516651056.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:36.420Z,1516651056.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:36.815Z,1516651056.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:37.204Z,1516651057.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:37.614Z,1516651057.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:38.004Z,1516651058.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:38.411Z,1516651058.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:38.820Z,1516651058.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:38.931Z,1516651058.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:39.214Z,1516651059.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:39.616Z,1516651059.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:39.729Z,1516651059.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:40.013Z,1516651060.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:40.139Z,1516651060.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:40.412Z,1516651060.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:40.817Z,1516651060.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:41.212Z,1516651061.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:41.624Z,1516651061.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:42.008Z,1516651062.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:42.411Z,1516651062.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:42.808Z,1516651062.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:43.208Z,1516651063.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:43.616Z,1516651063.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:44.018Z,1516651064.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:44.417Z,1516651064.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:44.816Z,1516651064.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:45.208Z,1516651065.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:45.603Z,1516651065.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:46.016Z,1516651066.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:46.407Z,1516651066.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:46.818Z,1516651066.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:47.213Z,1516651067.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:47.614Z,1516651067.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:48.016Z,1516651068.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:48.396Z,1516651068.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:48.818Z,1516651068.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:49.224Z,1516651069.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:49.615Z,1516651069.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:50.000Z,1516651070.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:50.400Z,1516651070.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:50.825Z,1516651070.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:51.226Z,1516651071.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:51.609Z,1516651071.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:52.029Z,1516651072.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:52.404Z,1516651072.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:52.809Z,1516651072.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:52.955Z,1516651072.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:53.232Z,1516651073.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:53.609Z,1516651073.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:53.753Z,1516651073.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:54.004Z,1516651074.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:54.159Z,1516651074.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:57:54.402Z,1516651074.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:54.810Z,1516651074.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:55.209Z,1516651075.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:55.609Z,1516651075.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:56.004Z,1516651076.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:56.401Z,1516651076.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:56.820Z,1516651076.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:57.216Z,1516651077.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:57.621Z,1516651077.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:58.013Z,1516651078.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:58.411Z,1516651078.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:58.823Z,1516651078.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:59.224Z,1516651079.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:57:59.614Z,1516651079.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:00.008Z,1516651080.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:00.409Z,1516651080.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:00.825Z,1516651080.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:01.227Z,1516651081.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:01.622Z,1516651081.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:02.001Z,1516651082.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:02.399Z,1516651082.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:02.831Z,1516651082.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:03.226Z,1516651083.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:03.625Z,1516651083.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:04.005Z,1516651084.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:04.403Z,1516651084.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:04.814Z,1516651084.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:05.209Z,1516651085.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:05.609Z,1516651085.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:06.001Z,1516651086.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:06.408Z,1516651086.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:06.809Z,1516651086.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:06.975Z,1516651086.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:07.213Z,1516651087.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:07.609Z,1516651087.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:07.775Z,1516651087.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:08.008Z,1516651088.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:08.187Z,1516651088.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:08.412Z,1516651088.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:08.813Z,1516651088.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:09.209Z,1516651089.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:09.612Z,1516651089.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:10.009Z,1516651090.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:10.402Z,1516651090.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:10.819Z,1516651090.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:11.216Z,1516651091.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:11.616Z,1516651091.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:12.010Z,1516651092.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:12.409Z,1516651092.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:12.820Z,1516651092.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:13.220Z,1516651093.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:13.624Z,1516651093.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:14.008Z,1516651094.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:14.408Z,1516651094.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:14.814Z,1516651094.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:15.224Z,1516651095.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:15.624Z,1516651095.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:16.017Z,1516651096.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:16.403Z,1516651096.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:16.808Z,1516651096.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:17.212Z,1516651097.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:17.611Z,1516651097.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:18.020Z,1516651098.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:21.011Z,1516651101.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:21.301Z,1516651101.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:21.428Z,1516651101.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:21.807Z,1516651101.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:21.842Z,1516651101.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:22.180Z,1516651102.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:22.259Z,1516651102.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:22.566Z,1516651102.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:22.975Z,1516651102.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:23.380Z,1516651103.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:23.780Z,1516651103.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:24.169Z,1516651104.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:24.580Z,1516651104.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:24.975Z,1516651104.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:25.377Z,1516651105.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:25.780Z,1516651105.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:26.184Z,1516651106.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:26.589Z,1516651106.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:26.992Z,1516651106.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:27.359Z,1516651107.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:27.793Z,1516651107.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:28.172Z,1516651108.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:28.567Z,1516651108.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:28.973Z,1516651108.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:29.373Z,1516651109.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:29.780Z,1516651109.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:30.171Z,1516651110.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:30.576Z,1516651110.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:30.967Z,1516651110.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:31.376Z,1516651111.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:31.770Z,1516651111.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:32.189Z,1516651112.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:32.580Z,1516651112.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:32.980Z,1516651112.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:33.367Z,1516651113.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:33.833Z,1516651113.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:34.164Z,1516651114.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:34.559Z,1516651114.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:34.987Z,1516651114.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:35.392Z,1516651115.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:35.840Z,1516651115.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:36.164Z,1516651116.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:36.568Z,1516651116.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:36.968Z,1516651116.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:37.371Z,1516651117.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:37.779Z,1516651117.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:38.182Z,1516651118.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:38.581Z,1516651118.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:38.980Z,1516651118.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:39.372Z,1516651119.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:39.776Z,1516651119.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:40.172Z,1516651120.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:40.559Z,1516651120.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:40.983Z,1516651120.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:41.385Z,1516651121.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:41.769Z,1516651121.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:42.164Z,1516651122.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:42.568Z,1516651122.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:42.968Z,1516651122.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:43.368Z,1516651123.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:43.770Z,1516651123.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:44.182Z,1516651124.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:44.584Z,1516651124.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:44.980Z,1516651124.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:45.368Z,1516651125.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:45.767Z,1516651125.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:46.171Z,1516651126.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:46.572Z,1516651126.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:46.981Z,1516651126.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:47.380Z,1516651127.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:47.839Z,1516651127.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:48.177Z,1516651128.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:48.579Z,1516651128.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:48.971Z,1516651128.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:49.055Z,1516651129.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:49.364Z,1516651129.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:49.759Z,1516651129.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:49.851Z,1516651129.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:50.170Z,1516651130.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:50.255Z,1516651130.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:58:50.573Z,1516651130.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:50.973Z,1516651130.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:51.375Z,1516651131.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:51.772Z,1516651131.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:52.180Z,1516651132.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:52.569Z,1516651132.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:52.980Z,1516651132.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:53.381Z,1516651133.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:53.784Z,1516651133.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:54.176Z,1516651134.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:54.584Z,1516651134.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:54.975Z,1516651134.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:55.373Z,1516651135.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:55.772Z,1516651135.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:56.174Z,1516651136.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:56.573Z,1516651136.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:56.980Z,1516651136.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:57.377Z,1516651137.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:57.776Z,1516651137.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:58.180Z,1516651138.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:58.568Z,1516651138.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:58.980Z,1516651138.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:59.384Z,1516651139.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:58:59.777Z,1516651139.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:00.169Z,1516651140.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:00.571Z,1516651140.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:00.967Z,1516651140.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:01.369Z,1516651141.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:01.770Z,1516651141.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:02.216Z,1516651142.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:02.581Z,1516651142.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:02.984Z,1516651142.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:03.075Z,1516651143.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:03.375Z,1516651143.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:03.777Z,1516651143.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:03.871Z,1516651143.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:04.180Z,1516651144.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:04.287Z,1516651144.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:04.559Z,1516651144.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:04.982Z,1516651144.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:05.385Z,1516651145.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:05.785Z,1516651145.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:06.163Z,1516651146.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:06.560Z,1516651146.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:06.959Z,1516651146.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:07.368Z,1516651147.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:07.772Z,1516651147.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:08.173Z,1516651148.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:08.573Z,1516651148.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:08.973Z,1516651148.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:09.366Z,1516651149.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:09.776Z,1516651149.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:10.172Z,1516651150.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:10.572Z,1516651150.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:10.973Z,1516651150.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:11.373Z,1516651151.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:11.781Z,1516651151.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:12.171Z,1516651152.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:12.570Z,1516651152.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:12.967Z,1516651152.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:13.373Z,1516651153.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:13.769Z,1516651153.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:14.182Z,1516651154.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:14.584Z,1516651154.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:14.986Z,1516651154.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:15.373Z,1516651155.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:15.773Z,1516651155.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:16.180Z,1516651156.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:16.564Z,1516651156.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:16.985Z,1516651156.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:17.087Z,1516651157.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:17.373Z,1516651157.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:17.393Z,1516651157.393 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T19:54:17.4Z
2018-01-22T19:59:17.393Z,1516651157.393 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T19:59:17.393Z,1516651157.393 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T19:59:17.777Z,1516651157.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:17.883Z,1516651157.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:18.277Z,1516651158.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:18.319Z,1516651158.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:19.115Z,1516651159.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:19.911Z,1516651159.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:20.315Z,1516651160.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:21.476Z,1516651161.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:21.652Z,1516651161.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:22.042Z,1516651162.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:22.438Z,1516651162.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:22.844Z,1516651162.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:23.214Z,1516651163.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:26.534Z,1516651166.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:26.615Z,1516651166.615 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180122T180533/Courier0040.lzma
2018-01-22T19:59:26.680Z,1516651166.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:27.005Z,1516651167.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:27.361Z,1516651167.361 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0040.lzma.bak
2018-01-22T19:59:27.361Z,1516651167.361 [DataOverHttps](INFO): SBD MOMSN=7751354
2018-01-22T19:59:27.412Z,1516651167.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:28.035Z,1516651168.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:28.207Z,1516651168.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:31.131Z,1516651171.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:31.665Z,1516651171.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:31.796Z,1516651171.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:31.927Z,1516651171.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:32.191Z,1516651172.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:32.331Z,1516651172.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:32.597Z,1516651172.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:32.985Z,1516651172.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:33.376Z,1516651173.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:36.655Z,1516651176.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:36.711Z,1516651176.711 [DataOverHttps](INFO): Sending 126 bytes from file Logs/20180122T180533/Express0041.lzma
2018-01-22T19:59:36.772Z,1516651176.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:37.127Z,1516651177.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:37.481Z,1516651177.481 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0041.lzma.bak
2018-01-22T19:59:37.481Z,1516651177.481 [DataOverHttps](INFO): SBD MOMSN=7751356
2018-01-22T19:59:37.606Z,1516651177.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:38.169Z,1516651178.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:38.172Z,1516651178.172 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T19:59:38.173Z,1516651178.173 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T19:59:38.173Z,1516651178.173 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T19:59:38.344Z,1516651178.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:41.656Z,1516651181.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:41.768Z,1516651181.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:42.137Z,1516651182.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:42.557Z,1516651182.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:42.933Z,1516651182.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:43.333Z,1516651183.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:43.729Z,1516651183.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:44.125Z,1516651184.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:44.530Z,1516651184.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:44.935Z,1516651184.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:45.344Z,1516651185.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:45.741Z,1516651185.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:46.144Z,1516651186.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:46.533Z,1516651186.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:46.931Z,1516651186.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:47.127Z,1516651187.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:47.341Z,1516651187.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:47.732Z,1516651187.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:47.923Z,1516651187.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:48.133Z,1516651188.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:48.327Z,1516651188.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:48.550Z,1516651188.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:48.956Z,1516651188.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:49.124Z,1516651189.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:49.336Z,1516651189.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:49.736Z,1516651189.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:49.919Z,1516651189.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:50.141Z,1516651190.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:50.323Z,1516651190.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:50.540Z,1516651190.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:50.938Z,1516651190.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:51.119Z,1516651191.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:51.352Z,1516651191.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:51.743Z,1516651191.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:51.915Z,1516651191.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:52.153Z,1516651192.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:52.319Z,1516651192.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:52.531Z,1516651192.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:52.948Z,1516651192.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:53.316Z,1516651193.316 [PNI_TCM](ERROR): CRC does not match. Expected:0x54373 got:0x50419
2018-01-22T19:59:53.351Z,1516651193.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:53.748Z,1516651193.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:54.148Z,1516651194.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:54.552Z,1516651194.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:54.948Z,1516651194.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:55.321Z,1516651195.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:55.750Z,1516651195.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:56.141Z,1516651196.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:56.525Z,1516651196.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:56.923Z,1516651196.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:57.345Z,1516651197.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:57.756Z,1516651197.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:58.149Z,1516651198.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:58.526Z,1516651198.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:58.939Z,1516651198.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:59.143Z,1516651199.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T19:59:59.345Z,1516651199.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:59.740Z,1516651199.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T19:59:59.941Z,1516651199.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:00.145Z,1516651200.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:00.355Z,1516651200.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:00.544Z,1516651200.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:00.941Z,1516651200.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:01.151Z,1516651201.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:01.339Z,1516651201.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:01.740Z,1516651201.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:01.947Z,1516651201.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:02.138Z,1516651202.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:02.351Z,1516651202.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:02.544Z,1516651202.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:02.944Z,1516651202.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:03.147Z,1516651203.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:03.352Z,1516651203.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:03.752Z,1516651203.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:03.943Z,1516651203.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:04.206Z,1516651204.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:04.347Z,1516651204.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:04.543Z,1516651204.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:04.937Z,1516651204.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:05.143Z,1516651205.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:05.323Z,1516651205.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:05.741Z,1516651205.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:05.939Z,1516651205.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:06.140Z,1516651206.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:06.343Z,1516651206.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:06.540Z,1516651206.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:06.944Z,1516651206.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:07.139Z,1516651207.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:07.342Z,1516651207.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:07.742Z,1516651207.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:07.935Z,1516651207.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:08.131Z,1516651208.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:08.532Z,1516651208.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:08.947Z,1516651208.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:09.345Z,1516651209.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:09.748Z,1516651209.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:10.148Z,1516651210.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:10.550Z,1516651210.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:10.944Z,1516651210.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:11.348Z,1516651211.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:11.747Z,1516651211.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:11.929Z,1516651211.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:12.151Z,1516651212.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:12.371Z,1516651212.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:12.556Z,1516651212.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:12.949Z,1516651212.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:13.167Z,1516651213.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:13.329Z,1516651213.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:13.760Z,1516651213.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:13.965Z,1516651213.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:14.130Z,1516651214.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:14.375Z,1516651214.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:14.533Z,1516651214.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:14.940Z,1516651214.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:15.171Z,1516651215.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:15.364Z,1516651215.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:15.737Z,1516651215.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:15.967Z,1516651215.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:16.148Z,1516651216.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:16.371Z,1516651216.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:16.539Z,1516651216.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:16.944Z,1516651216.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:17.167Z,1516651217.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:17.336Z,1516651217.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:17.741Z,1516651217.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:17.963Z,1516651217.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:18.143Z,1516651218.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:18.367Z,1516651218.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:18.569Z,1516651218.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:18.951Z,1516651218.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:19.163Z,1516651219.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:19.327Z,1516651219.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:19.736Z,1516651219.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:19.961Z,1516651219.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:20.132Z,1516651220.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:20.367Z,1516651220.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:20.532Z,1516651220.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:20.942Z,1516651220.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:21.345Z,1516651221.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:21.770Z,1516651221.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:22.141Z,1516651222.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:22.141Z,1516651222.141 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-01-22T20:00:22.141Z,1516651222.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:00:22.144Z,1516651222.144 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:22.144Z,1516651222.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-01-22T20:00:22.144Z,1516651222.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:00:22.149Z,1516651222.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:22.149Z,1516651222.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-01-22T20:00:22.149Z,1516651222.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:00:22.176Z,1516651222.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:00:22.176Z,1516651222.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:00:22.176Z,1516651222.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:00:22.554Z,1516651222.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:00:22.554Z,1516651222.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-01-22T20:00:22.554Z,1516651222.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:00:22.554Z,1516651222.554 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-01-22T20:00:22.555Z,1516651222.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:00:22.555Z,1516651222.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-01-22T20:00:22.941Z,1516651222.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:00:22.941Z,1516651222.941 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:00:22.942Z,1516651222.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:00:22.942Z,1516651222.942 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:00:22.943Z,1516651222.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:00:22.943Z,1516651222.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:00:22.943Z,1516651222.943 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:00:22.944Z,1516651222.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:00:22.944Z,1516651222.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:00:23.344Z,1516651223.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:23.741Z,1516651223.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:24.145Z,1516651224.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:24.551Z,1516651224.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:24.952Z,1516651224.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:25.159Z,1516651225.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:25.336Z,1516651225.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:25.719Z,1516651225.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:25.957Z,1516651225.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:26.152Z,1516651226.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:26.391Z,1516651226.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:26.528Z,1516651226.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:26.928Z,1516651226.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:27.189Z,1516651227.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:27.333Z,1516651227.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:27.736Z,1516651227.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:27.985Z,1516651227.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:28.133Z,1516651228.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:28.399Z,1516651228.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:28.527Z,1516651228.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:28.933Z,1516651228.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:29.197Z,1516651229.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:29.337Z,1516651229.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:29.732Z,1516651229.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:29.991Z,1516651229.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:30.133Z,1516651230.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:30.395Z,1516651230.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:30.533Z,1516651230.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:30.933Z,1516651230.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:31.191Z,1516651231.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:31.333Z,1516651231.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:31.732Z,1516651231.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:31.987Z,1516651231.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:32.133Z,1516651232.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:32.391Z,1516651232.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:32.532Z,1516651232.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:32.931Z,1516651232.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:33.187Z,1516651233.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:33.340Z,1516651233.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:33.740Z,1516651233.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:33.983Z,1516651233.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:34.164Z,1516651234.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:34.387Z,1516651234.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:34.532Z,1516651234.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:34.932Z,1516651234.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:35.339Z,1516651235.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:35.732Z,1516651235.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:36.140Z,1516651236.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:36.541Z,1516651236.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:36.937Z,1516651236.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:37.327Z,1516651237.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:37.754Z,1516651237.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:38.128Z,1516651238.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:38.537Z,1516651238.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:38.934Z,1516651238.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:39.175Z,1516651239.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:39.973Z,1516651239.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:40.431Z,1516651240.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:41.228Z,1516651241.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:42.024Z,1516651242.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:42.292Z,1516651242.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:42.435Z,1516651242.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:42.441Z,1516651242.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:42.784Z,1516651242.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:43.176Z,1516651243.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:43.231Z,1516651243.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:43.552Z,1516651243.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:43.966Z,1516651243.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:44.027Z,1516651244.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:44.376Z,1516651244.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:44.431Z,1516651244.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:44.772Z,1516651244.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:45.173Z,1516651245.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:45.227Z,1516651245.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:45.563Z,1516651245.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:45.968Z,1516651245.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:46.023Z,1516651246.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:46.365Z,1516651246.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:46.427Z,1516651246.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:46.768Z,1516651246.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:47.175Z,1516651247.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:47.223Z,1516651247.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:47.582Z,1516651247.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:47.984Z,1516651247.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:48.019Z,1516651248.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:48.372Z,1516651248.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:48.423Z,1516651248.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:48.751Z,1516651248.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:49.156Z,1516651249.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:49.552Z,1516651249.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:49.957Z,1516651249.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:50.373Z,1516651250.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:50.777Z,1516651250.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:51.189Z,1516651251.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:51.559Z,1516651251.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:51.968Z,1516651251.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:52.360Z,1516651252.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:52.760Z,1516651252.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:53.185Z,1516651253.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:53.211Z,1516651253.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:53.565Z,1516651253.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:53.997Z,1516651253.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:54.009Z,1516651254.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:54.365Z,1516651254.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:54.471Z,1516651254.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:54.768Z,1516651254.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:55.168Z,1516651255.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:55.267Z,1516651255.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:55.565Z,1516651255.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:55.951Z,1516651255.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:56.063Z,1516651256.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:56.389Z,1516651256.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:56.468Z,1516651256.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:56.780Z,1516651256.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:57.180Z,1516651257.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:57.263Z,1516651257.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:57.559Z,1516651257.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:57.987Z,1516651257.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:58.059Z,1516651258.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:58.360Z,1516651258.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:58.463Z,1516651258.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:58.755Z,1516651258.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:59.181Z,1516651259.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:59.259Z,1516651259.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:00:59.569Z,1516651259.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:00:59.965Z,1516651259.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:00.055Z,1516651260.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:00.362Z,1516651260.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:00.459Z,1516651260.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:00.759Z,1516651260.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:01.168Z,1516651261.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:01.255Z,1516651261.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:01.561Z,1516651261.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:01.964Z,1516651261.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:02.051Z,1516651262.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:02.376Z,1516651262.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:02.455Z,1516651262.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:02.771Z,1516651262.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:03.174Z,1516651263.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:03.251Z,1516651263.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:03.563Z,1516651263.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:03.967Z,1516651263.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:04.047Z,1516651264.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:04.365Z,1516651264.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:04.451Z,1516651264.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:04.768Z,1516651264.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:05.176Z,1516651265.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:05.247Z,1516651265.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:05.576Z,1516651265.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:05.973Z,1516651265.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:06.043Z,1516651266.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:06.365Z,1516651266.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:06.447Z,1516651266.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:06.760Z,1516651266.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:07.168Z,1516651267.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:07.243Z,1516651267.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:07.568Z,1516651267.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:07.965Z,1516651267.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:08.041Z,1516651268.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:08.386Z,1516651268.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:08.475Z,1516651268.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:08.791Z,1516651268.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:09.182Z,1516651269.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:09.271Z,1516651269.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:09.576Z,1516651269.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:09.980Z,1516651269.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:10.067Z,1516651270.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:10.352Z,1516651270.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:10.487Z,1516651270.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:10.753Z,1516651270.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:11.177Z,1516651271.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:11.284Z,1516651271.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:11.581Z,1516651271.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:11.986Z,1516651271.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:12.079Z,1516651272.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:12.365Z,1516651272.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:12.483Z,1516651272.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:12.764Z,1516651272.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:13.157Z,1516651273.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:13.279Z,1516651273.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:13.562Z,1516651273.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:13.964Z,1516651273.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:14.075Z,1516651274.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:14.392Z,1516651274.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:14.479Z,1516651274.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:14.784Z,1516651274.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:15.180Z,1516651275.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:15.275Z,1516651275.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:15.561Z,1516651275.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:15.969Z,1516651275.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:16.072Z,1516651276.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:16.360Z,1516651276.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:16.475Z,1516651276.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:01:16.755Z,1516651276.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:17.192Z,1516651277.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:17.585Z,1516651277.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:17.965Z,1516651277.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:18.364Z,1516651278.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:18.757Z,1516651278.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:19.167Z,1516651279.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:19.572Z,1516651279.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:19.964Z,1516651279.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:20.370Z,1516651280.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:20.776Z,1516651280.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:21.172Z,1516651281.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:21.567Z,1516651281.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:21.969Z,1516651281.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:22.368Z,1516651282.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:22.768Z,1516651282.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:23.174Z,1516651283.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:23.573Z,1516651283.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:23.985Z,1516651283.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:24.356Z,1516651284.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:24.751Z,1516651284.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:25.156Z,1516651285.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:25.560Z,1516651285.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:25.979Z,1516651285.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:26.392Z,1516651286.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:26.787Z,1516651286.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:27.186Z,1516651287.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:27.553Z,1516651287.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:27.965Z,1516651287.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:28.389Z,1516651288.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:28.799Z,1516651288.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:29.211Z,1516651289.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:29.565Z,1516651289.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:29.996Z,1516651289.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:30.369Z,1516651290.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:30.757Z,1516651290.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:30.771Z,1516651290.771 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:01:30.771Z,1516651290.771 [BPC1] No Fault, FailCount= 10
2018-01-22T20:01:31.304Z,1516651291.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:31.603Z,1516651291.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:31.984Z,1516651291.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:32.404Z,1516651292.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:32.765Z,1516651292.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:33.208Z,1516651293.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:33.620Z,1516651293.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:34.008Z,1516651294.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:34.407Z,1516651294.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:34.771Z,1516651294.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:35.188Z,1516651295.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:35.588Z,1516651295.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:35.987Z,1516651295.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:36.361Z,1516651296.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:36.772Z,1516651296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:37.169Z,1516651297.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:37.572Z,1516651297.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:37.972Z,1516651297.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:38.369Z,1516651298.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:38.766Z,1516651298.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:39.180Z,1516651299.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:42.466Z,1516651302.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:42.608Z,1516651302.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:42.932Z,1516651302.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:43.356Z,1516651303.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:43.783Z,1516651303.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:44.160Z,1516651304.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:44.538Z,1516651304.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:44.938Z,1516651304.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:45.336Z,1516651305.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:45.798Z,1516651305.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:46.146Z,1516651306.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:46.563Z,1516651306.563 [BPC1](INFO): Initialized
2018-01-22T20:01:46.578Z,1516651306.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:46.950Z,1516651306.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:47.342Z,1516651307.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:47.737Z,1516651307.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:48.126Z,1516651308.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:48.550Z,1516651308.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:48.955Z,1516651308.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:49.358Z,1516651309.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:49.728Z,1516651309.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:50.172Z,1516651310.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:50.536Z,1516651310.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:50.931Z,1516651310.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:51.341Z,1516651311.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:51.737Z,1516651311.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:52.179Z,1516651312.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:52.530Z,1516651312.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:52.944Z,1516651312.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:53.331Z,1516651313.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:53.793Z,1516651313.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:54.156Z,1516651314.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:54.550Z,1516651314.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:54.957Z,1516651314.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:55.360Z,1516651315.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:55.804Z,1516651315.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:56.127Z,1516651316.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:56.532Z,1516651316.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:56.932Z,1516651316.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:57.338Z,1516651317.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:57.834Z,1516651317.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:58.133Z,1516651318.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:58.530Z,1516651318.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:58.931Z,1516651318.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:59.330Z,1516651319.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:01:59.797Z,1516651319.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:00.131Z,1516651320.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:00.569Z,1516651320.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:00.945Z,1516651320.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:01.348Z,1516651321.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:01.738Z,1516651321.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:02.141Z,1516651322.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:02.545Z,1516651322.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:02.942Z,1516651322.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:03.345Z,1516651323.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:03.745Z,1516651323.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:04.196Z,1516651324.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:04.531Z,1516651324.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:04.944Z,1516651324.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:05.342Z,1516651325.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:05.733Z,1516651325.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:06.175Z,1516651326.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:06.553Z,1516651326.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:06.948Z,1516651326.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:07.352Z,1516651327.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:07.732Z,1516651327.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:08.145Z,1516651328.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:08.546Z,1516651328.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:08.925Z,1516651328.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:09.353Z,1516651329.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:09.832Z,1516651329.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:10.155Z,1516651330.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:10.528Z,1516651330.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:10.933Z,1516651330.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:11.333Z,1516651331.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:11.728Z,1516651331.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:12.136Z,1516651332.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:12.544Z,1516651332.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:12.938Z,1516651332.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:13.346Z,1516651333.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:13.731Z,1516651333.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:14.154Z,1516651334.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:14.537Z,1516651334.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:14.931Z,1516651334.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:15.352Z,1516651335.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:15.744Z,1516651335.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:16.140Z,1516651336.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:16.531Z,1516651336.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:16.940Z,1516651336.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:17.328Z,1516651337.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:17.732Z,1516651337.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:18.191Z,1516651338.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:18.544Z,1516651338.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:18.952Z,1516651338.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:19.349Z,1516651339.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:19.724Z,1516651339.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:20.211Z,1516651340.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:20.524Z,1516651340.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:20.928Z,1516651340.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:21.350Z,1516651341.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:21.754Z,1516651341.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:22.136Z,1516651342.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:22.536Z,1516651342.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:22.935Z,1516651342.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:23.331Z,1516651343.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:23.730Z,1516651343.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:24.144Z,1516651344.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:24.544Z,1516651344.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:24.943Z,1516651344.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:25.352Z,1516651345.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:25.732Z,1516651345.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:26.139Z,1516651346.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:26.540Z,1516651346.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:26.948Z,1516651346.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:27.348Z,1516651347.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:27.723Z,1516651347.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:27.750Z,1516651347.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:28.119Z,1516651348.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:28.156Z,1516651348.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:28.517Z,1516651348.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:28.531Z,1516651348.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:28.916Z,1516651348.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:28.936Z,1516651348.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:29.312Z,1516651349.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:29.332Z,1516651349.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:29.717Z,1516651349.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:29.731Z,1516651349.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:30.120Z,1516651350.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:30.140Z,1516651350.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:30.519Z,1516651350.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:30.540Z,1516651350.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:30.923Z,1516651350.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:30.938Z,1516651350.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:31.323Z,1516651351.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:31.338Z,1516651351.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:31.708Z,1516651351.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:31.736Z,1516651351.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:32.115Z,1516651352.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:32.203Z,1516651352.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:32.513Z,1516651352.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:32.544Z,1516651352.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:32.916Z,1516651352.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:32.930Z,1516651352.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:33.324Z,1516651353.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:33.344Z,1516651353.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:33.725Z,1516651353.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:33.740Z,1516651353.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:34.129Z,1516651354.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:34.226Z,1516651354.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:34.509Z,1516651354.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:34.539Z,1516651354.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:34.909Z,1516651354.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:34.940Z,1516651354.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:35.309Z,1516651355.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:35.344Z,1516651355.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:35.709Z,1516651355.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:35.724Z,1516651355.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:36.109Z,1516651356.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:36.128Z,1516651356.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:36.523Z,1516651356.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:36.554Z,1516651356.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:36.927Z,1516651356.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:36.957Z,1516651356.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:37.323Z,1516651357.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:37.338Z,1516651357.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:37.715Z,1516651357.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:37.729Z,1516651357.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:38.115Z,1516651358.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:38.130Z,1516651358.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:38.512Z,1516651358.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:38.536Z,1516651358.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:38.909Z,1516651358.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:38.936Z,1516651358.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:39.326Z,1516651359.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:39.341Z,1516651359.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:42.691Z,1516651362.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:42.722Z,1516651362.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:42.823Z,1516651362.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:42.840Z,1516651362.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:43.171Z,1516651363.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:43.194Z,1516651363.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:43.576Z,1516651363.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:43.606Z,1516651363.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:43.979Z,1516651363.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:43.993Z,1516651363.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:44.383Z,1516651364.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:44.412Z,1516651364.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:44.786Z,1516651364.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:44.809Z,1516651364.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:45.181Z,1516651365.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:45.207Z,1516651365.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:45.571Z,1516651365.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:02:45.603Z,1516651365.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:46.000Z,1516651366.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:46.394Z,1516651366.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:46.792Z,1516651366.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:47.196Z,1516651367.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:47.604Z,1516651367.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:48.011Z,1516651368.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:48.410Z,1516651368.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:48.793Z,1516651368.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:49.197Z,1516651369.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:49.599Z,1516651369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:49.993Z,1516651369.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:50.412Z,1516651370.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:50.812Z,1516651370.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:51.206Z,1516651371.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:51.601Z,1516651371.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:52.008Z,1516651372.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:52.407Z,1516651372.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:52.804Z,1516651372.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:53.198Z,1516651373.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:53.604Z,1516651373.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:54.008Z,1516651374.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:54.416Z,1516651374.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:54.805Z,1516651374.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:55.179Z,1516651375.179 [PNI_TCM](ERROR): CRC does not match. Expected:0x20503 got:0x49451
2018-01-22T20:02:55.214Z,1516651375.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:55.608Z,1516651375.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:56.003Z,1516651376.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:56.397Z,1516651376.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:56.797Z,1516651376.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:57.213Z,1516651377.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:57.598Z,1516651377.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:57.000Z,1516651378.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:58.399Z,1516651378.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:58.807Z,1516651378.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:59.198Z,1516651379.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:02:59.601Z,1516651379.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:00.007Z,1516651380.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:00.426Z,1516651380.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:00.789Z,1516651380.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:01.208Z,1516651381.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:01.598Z,1516651381.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:02.001Z,1516651382.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:02.408Z,1516651382.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:02.810Z,1516651382.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:03.206Z,1516651383.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:03.600Z,1516651383.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:04.003Z,1516651384.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:04.402Z,1516651384.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:04.797Z,1516651384.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:05.204Z,1516651385.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:05.608Z,1516651385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:06.008Z,1516651386.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:06.391Z,1516651386.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:06.406Z,1516651386.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:06.761Z,1516651386.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:06.800Z,1516651386.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:07.165Z,1516651387.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:07.199Z,1516651387.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:07.566Z,1516651387.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:07.601Z,1516651387.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:07.965Z,1516651387.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:07.997Z,1516651387.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:08.383Z,1516651388.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:08.414Z,1516651388.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:08.787Z,1516651388.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:08.807Z,1516651388.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:09.176Z,1516651389.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:09.216Z,1516651389.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:09.570Z,1516651389.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:09.596Z,1516651389.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:09.972Z,1516651389.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:09.987Z,1516651389.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:10.368Z,1516651390.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:10.396Z,1516651390.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:10.770Z,1516651390.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:10.811Z,1516651390.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:11.173Z,1516651391.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:11.196Z,1516651391.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:11.582Z,1516651391.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:11.597Z,1516651391.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:11.984Z,1516651391.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:12.005Z,1516651392.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:12.384Z,1516651392.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:12.413Z,1516651392.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:12.765Z,1516651392.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:12.798Z,1516651392.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:13.166Z,1516651393.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:13.196Z,1516651393.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:13.566Z,1516651393.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:13.592Z,1516651393.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:13.962Z,1516651393.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:13.997Z,1516651393.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:14.384Z,1516651394.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:14.404Z,1516651394.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:14.785Z,1516651394.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:14.804Z,1516651394.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:15.180Z,1516651395.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:15.202Z,1516651395.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:15.565Z,1516651395.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:15.596Z,1516651395.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:15.961Z,1516651395.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:16.005Z,1516651396.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:16.373Z,1516651396.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:16.400Z,1516651396.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:16.765Z,1516651396.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:16.800Z,1516651396.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:17.165Z,1516651397.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:17.202Z,1516651397.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:17.586Z,1516651397.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:17.609Z,1516651397.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:17.987Z,1516651397.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:18.003Z,1516651398.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:18.383Z,1516651398.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:18.407Z,1516651398.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:18.765Z,1516651398.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:18.780Z,1516651398.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:19.165Z,1516651399.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:19.184Z,1516651399.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:19.573Z,1516651399.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:19.588Z,1516651399.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:19.969Z,1516651399.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:19.984Z,1516651399.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:20.395Z,1516651400.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:20.430Z,1516651400.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:20.779Z,1516651400.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:20.793Z,1516651400.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:21.179Z,1516651401.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:21.194Z,1516651401.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:21.568Z,1516651401.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:21.596Z,1516651401.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:21.972Z,1516651401.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:21.987Z,1516651401.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:22.369Z,1516651402.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:22.396Z,1516651402.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:22.767Z,1516651402.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:22.799Z,1516651402.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:23.161Z,1516651403.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:23.195Z,1516651403.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:23.195Z,1516651403.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-01-22T20:03:23.195Z,1516651403.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:03:23.197Z,1516651403.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:23.197Z,1516651403.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-01-22T20:03:23.197Z,1516651403.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:03:23.199Z,1516651403.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:23.199Z,1516651403.199 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-01-22T20:03:23.199Z,1516651403.199 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:03:23.235Z,1516651403.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:03:23.235Z,1516651403.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:03:23.235Z,1516651403.235 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:03:23.576Z,1516651403.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:23.623Z,1516651403.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:03:23.623Z,1516651403.623 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-01-22T20:03:23.624Z,1516651403.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:03:23.624Z,1516651403.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-01-22T20:03:23.625Z,1516651403.625 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:03:23.625Z,1516651403.625 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-01-22T20:03:23.989Z,1516651403.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:24.003Z,1516651404.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:03:24.003Z,1516651404.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:03:24.004Z,1516651404.004 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:03:24.005Z,1516651404.005 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:03:24.006Z,1516651404.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:03:24.007Z,1516651404.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:03:24.008Z,1516651404.008 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:03:24.009Z,1516651404.009 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:03:24.010Z,1516651404.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:03:24.380Z,1516651404.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:24.403Z,1516651404.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:24.761Z,1516651404.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:24.796Z,1516651404.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:25.165Z,1516651405.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:25.196Z,1516651405.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:25.566Z,1516651405.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:25.599Z,1516651405.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:25.985Z,1516651405.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:26.021Z,1516651406.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:26.383Z,1516651406.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:26.414Z,1516651406.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:26.787Z,1516651406.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:26.816Z,1516651406.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:27.179Z,1516651407.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:27.194Z,1516651407.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:27.568Z,1516651407.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:27.588Z,1516651407.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:27.968Z,1516651407.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:27.988Z,1516651407.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:28.377Z,1516651408.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:28.396Z,1516651408.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:28.770Z,1516651408.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:28.798Z,1516651408.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:29.173Z,1516651409.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:29.187Z,1516651409.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:29.579Z,1516651409.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:29.594Z,1516651409.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:29.979Z,1516651409.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:29.994Z,1516651409.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:30.391Z,1516651410.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:30.429Z,1516651410.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:30.769Z,1516651410.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:30.792Z,1516651410.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:31.167Z,1516651411.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:31.196Z,1516651411.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:31.565Z,1516651411.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:31.592Z,1516651411.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:31.980Z,1516651411.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:32.000Z,1516651412.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:32.380Z,1516651412.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:32.402Z,1516651412.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:32.787Z,1516651412.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:32.808Z,1516651412.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:33.186Z,1516651413.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:33.201Z,1516651413.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:33.565Z,1516651413.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:33.595Z,1516651413.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:33.965Z,1516651413.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:33.991Z,1516651413.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:34.365Z,1516651414.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:34.396Z,1516651414.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:34.765Z,1516651414.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:34.795Z,1516651414.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:35.165Z,1516651415.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:35.203Z,1516651415.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:35.590Z,1516651415.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:35.605Z,1516651415.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:35.986Z,1516651415.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:36.008Z,1516651416.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:36.394Z,1516651416.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:36.409Z,1516651416.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:36.765Z,1516651416.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:36.795Z,1516651416.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:37.173Z,1516651417.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:37.197Z,1516651417.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:37.561Z,1516651417.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:37.596Z,1516651417.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:37.966Z,1516651417.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:37.999Z,1516651417.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:38.386Z,1516651418.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:38.401Z,1516651418.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:38.785Z,1516651418.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:38.800Z,1516651418.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:39.183Z,1516651419.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:39.212Z,1516651419.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:39.567Z,1516651419.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:39.599Z,1516651419.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:42.852Z,1516651422.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:42.868Z,1516651422.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:42.964Z,1516651422.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:43.008Z,1516651423.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:43.350Z,1516651423.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:43.365Z,1516651423.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:43.751Z,1516651423.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:43.765Z,1516651423.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:44.153Z,1516651424.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:44.172Z,1516651424.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:44.533Z,1516651424.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:44.564Z,1516651424.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:44.936Z,1516651424.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:44.951Z,1516651424.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:45.343Z,1516651425.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:45.358Z,1516651425.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:45.743Z,1516651425.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:45.758Z,1516651425.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:46.141Z,1516651426.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:46.160Z,1516651426.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:46.537Z,1516651426.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:46.551Z,1516651426.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:46.931Z,1516651426.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:46.959Z,1516651426.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:47.343Z,1516651427.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:47.364Z,1516651427.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:47.747Z,1516651427.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:47.762Z,1516651427.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:48.141Z,1516651428.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:48.160Z,1516651428.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:48.537Z,1516651428.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:48.552Z,1516651428.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:48.942Z,1516651428.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:48.964Z,1516651428.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:49.348Z,1516651429.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:49.363Z,1516651429.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:49.743Z,1516651429.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:49.757Z,1516651429.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:50.151Z,1516651430.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:50.174Z,1516651430.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:50.537Z,1516651430.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:50.552Z,1516651430.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:50.933Z,1516651430.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:50.947Z,1516651430.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:51.347Z,1516651431.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:51.378Z,1516651431.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:51.751Z,1516651431.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:51.773Z,1516651431.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:52.151Z,1516651432.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:52.180Z,1516651432.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:52.537Z,1516651432.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:52.552Z,1516651432.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:52.935Z,1516651432.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:52.956Z,1516651432.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:53.343Z,1516651433.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:53.358Z,1516651433.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:53.743Z,1516651433.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:53.758Z,1516651433.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:54.151Z,1516651434.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:54.182Z,1516651434.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:54.536Z,1516651434.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:54.560Z,1516651434.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:54.935Z,1516651434.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:54.951Z,1516651434.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:55.343Z,1516651435.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:55.364Z,1516651435.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:55.745Z,1516651435.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:55.768Z,1516651435.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:56.145Z,1516651436.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:56.164Z,1516651436.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:56.536Z,1516651436.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:56.551Z,1516651436.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:56.931Z,1516651436.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:56.959Z,1516651436.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:57.350Z,1516651437.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:57.365Z,1516651437.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:57.750Z,1516651437.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:57.764Z,1516651437.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:58.150Z,1516651438.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:58.165Z,1516651438.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:58.528Z,1516651438.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:58.553Z,1516651438.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:58.929Z,1516651438.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:58.959Z,1516651438.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:59.350Z,1516651439.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:59.365Z,1516651439.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:03:59.750Z,1516651439.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:03:59.765Z,1516651439.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:00.152Z,1516651440.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:00.172Z,1516651440.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:00.530Z,1516651440.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:00.557Z,1516651440.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:00.929Z,1516651440.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:00.960Z,1516651440.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:01.347Z,1516651441.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:01.366Z,1516651441.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:01.751Z,1516651441.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:01.770Z,1516651441.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:02.139Z,1516651442.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:02.164Z,1516651442.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:02.534Z,1516651442.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:02.557Z,1516651442.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:02.929Z,1516651442.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:02.944Z,1516651442.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:03.347Z,1516651443.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:03.380Z,1516651443.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:03.743Z,1516651443.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:03.776Z,1516651443.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:04.161Z,1516651444.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:04.175Z,1516651444.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:04.531Z,1516651444.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:04.550Z,1516651444.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:04.929Z,1516651444.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:04.944Z,1516651444.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:05.344Z,1516651445.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:05.375Z,1516651445.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:05.748Z,1516651445.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:05.785Z,1516651445.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:06.148Z,1516651446.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:06.179Z,1516651446.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:06.533Z,1516651446.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:06.560Z,1516651446.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:06.933Z,1516651446.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:06.960Z,1516651446.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:07.349Z,1516651447.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:07.365Z,1516651447.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:07.750Z,1516651447.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:07.772Z,1516651447.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:08.151Z,1516651448.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:08.167Z,1516651448.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:08.533Z,1516651448.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:08.560Z,1516651448.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:08.939Z,1516651448.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:08.958Z,1516651448.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:09.354Z,1516651449.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:09.376Z,1516651449.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:09.748Z,1516651449.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:09.767Z,1516651449.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:10.147Z,1516651450.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:10.180Z,1516651450.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:10.530Z,1516651450.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:10.559Z,1516651450.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:10.935Z,1516651450.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:10.972Z,1516651450.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:11.329Z,1516651451.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:11.364Z,1516651451.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:11.744Z,1516651451.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:11.776Z,1516651451.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:12.144Z,1516651452.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:12.179Z,1516651452.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:12.557Z,1516651452.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:12.582Z,1516651452.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:12.937Z,1516651452.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:12.952Z,1516651452.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:13.333Z,1516651453.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:13.347Z,1516651453.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:13.535Z,1516651453.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:13.733Z,1516651453.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:13.748Z,1516651453.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:14.143Z,1516651454.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:14.158Z,1516651454.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:14.331Z,1516651454.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:14.551Z,1516651454.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:14.584Z,1516651454.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:14.735Z,1516651454.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:14.947Z,1516651454.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:14.962Z,1516651454.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:15.343Z,1516651455.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:15.358Z,1516651455.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:15.531Z,1516651455.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:15.734Z,1516651455.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:15.756Z,1516651455.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:16.140Z,1516651456.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:16.154Z,1516651456.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:16.327Z,1516651456.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:16.532Z,1516651456.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:16.560Z,1516651456.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:16.731Z,1516651456.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:16.934Z,1516651456.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:16.956Z,1516651456.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:17.334Z,1516651457.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:17.367Z,1516651457.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:17.528Z,1516651457.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:17.744Z,1516651457.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:17.768Z,1516651457.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:18.149Z,1516651458.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:18.168Z,1516651458.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:18.324Z,1516651458.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:18.547Z,1516651458.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:18.570Z,1516651458.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:18.727Z,1516651458.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:18.939Z,1516651458.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:18.957Z,1516651458.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:19.337Z,1516651459.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:19.367Z,1516651459.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:19.524Z,1516651459.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:19.741Z,1516651459.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:19.756Z,1516651459.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:20.144Z,1516651460.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:20.164Z,1516651460.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:20.319Z,1516651460.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:20.551Z,1516651460.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:20.566Z,1516651460.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:20.723Z,1516651460.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:20.948Z,1516651460.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:20.975Z,1516651460.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:21.354Z,1516651461.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:21.376Z,1516651461.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:21.729Z,1516651461.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:21.754Z,1516651461.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:22.132Z,1516651462.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:22.160Z,1516651462.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:22.545Z,1516651462.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:22.596Z,1516651462.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:22.934Z,1516651462.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:22.958Z,1516651462.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:23.333Z,1516651463.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:23.359Z,1516651463.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:23.749Z,1516651463.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:23.772Z,1516651463.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:24.147Z,1516651464.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:24.168Z,1516651464.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:24.551Z,1516651464.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:24.582Z,1516651464.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:24.934Z,1516651464.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:24.955Z,1516651464.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:25.337Z,1516651465.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:25.353Z,1516651465.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:25.738Z,1516651465.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:25.753Z,1516651465.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:26.134Z,1516651466.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:26.168Z,1516651466.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:26.554Z,1516651466.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:26.576Z,1516651466.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:26.955Z,1516651466.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:26.970Z,1516651466.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:27.349Z,1516651467.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:27.378Z,1516651467.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:27.559Z,1516651467.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:27.733Z,1516651467.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:27.764Z,1516651467.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:28.137Z,1516651468.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:28.163Z,1516651468.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:28.355Z,1516651468.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:28.529Z,1516651468.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:28.564Z,1516651468.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:28.759Z,1516651468.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:28.939Z,1516651468.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:28.954Z,1516651468.954 [PNI_TCM](ERROR): CRC does not match. Expected:0x16080 got:0x49488
2018-01-22T20:04:28.980Z,1516651468.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:29.333Z,1516651469.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:29.364Z,1516651469.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:29.555Z,1516651469.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:29.756Z,1516651469.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:29.779Z,1516651469.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:30.146Z,1516651470.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:30.171Z,1516651470.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:30.351Z,1516651470.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:30.555Z,1516651470.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:30.573Z,1516651470.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:30.755Z,1516651470.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:30.933Z,1516651470.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:30.956Z,1516651470.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:31.334Z,1516651471.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:31.349Z,1516651471.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:31.552Z,1516651471.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:31.730Z,1516651471.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:31.772Z,1516651471.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:32.138Z,1516651472.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:32.168Z,1516651472.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:32.347Z,1516651472.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:32.545Z,1516651472.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:32.564Z,1516651472.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:32.751Z,1516651472.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:32.947Z,1516651472.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:32.962Z,1516651472.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:33.345Z,1516651473.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:33.369Z,1516651473.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:33.547Z,1516651473.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:33.729Z,1516651473.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:33.768Z,1516651473.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:34.141Z,1516651474.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:34.167Z,1516651474.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:34.345Z,1516651474.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:34.541Z,1516651474.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:34.571Z,1516651474.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:34.751Z,1516651474.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:34.928Z,1516651474.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:34.967Z,1516651474.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:35.329Z,1516651475.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:35.365Z,1516651475.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:35.751Z,1516651475.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:35.772Z,1516651475.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:36.143Z,1516651476.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:36.168Z,1516651476.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:36.543Z,1516651476.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:36.584Z,1516651476.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:36.933Z,1516651476.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:36.972Z,1516651476.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:37.337Z,1516651477.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:37.345Z,1516651477.345 [PNI_TCM](ERROR): CRC does not match. Expected:0x52955 got:0x62528
2018-01-22T20:04:37.377Z,1516651477.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:37.737Z,1516651477.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:37.760Z,1516651477.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:38.136Z,1516651478.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:38.180Z,1516651478.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:38.543Z,1516651478.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:38.562Z,1516651478.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:38.565Z,1516651478.565 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:04:38.565Z,1516651478.565 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:04:38.565Z,1516651478.565 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:04:38.565Z,1516651478.565 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:04:38.947Z,1516651478.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:38.984Z,1516651478.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:38.991Z,1516651478.991 [Default:CheckIn:D] Stopped
2018-01-22T20:04:38.991Z,1516651478.991 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:04:39.348Z,1516651479.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:39.372Z,1516651479.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.238379 min 
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn:E] Stopped
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn] Stopped
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn](INFO): Running loop #11
2018-01-22T20:04:39.380Z,1516651479.380 [Default:CheckIn] Running Loop=11
2018-01-22T20:04:39.381Z,1516651479.381 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:04:39.381Z,1516651479.381 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:04:39.575Z,1516651479.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:39.736Z,1516651479.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:39.776Z,1516651479.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:40.373Z,1516651480.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:40.807Z,1516651480.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:41.603Z,1516651481.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:42.399Z,1516651482.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:42.803Z,1516651482.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:43.090Z,1516651483.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:43.105Z,1516651483.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:43.209Z,1516651483.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:43.248Z,1516651483.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:43.567Z,1516651483.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:43.598Z,1516651483.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:43.599Z,1516651483.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:44.001Z,1516651484.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:44.071Z,1516651484.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:44.367Z,1516651484.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:44.382Z,1516651484.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:44.395Z,1516651484.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:44.753Z,1516651484.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:44.774Z,1516651484.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:44.799Z,1516651484.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:45.158Z,1516651485.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:45.188Z,1516651485.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:45.559Z,1516651485.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:45.578Z,1516651485.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:45.603Z,1516651485.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:45.957Z,1516651485.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:45.975Z,1516651485.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:46.349Z,1516651486.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:46.376Z,1516651486.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:46.407Z,1516651486.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:46.773Z,1516651486.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:46.792Z,1516651486.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:46.811Z,1516651486.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:47.169Z,1516651487.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:47.192Z,1516651487.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:47.574Z,1516651487.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:47.588Z,1516651487.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:47.607Z,1516651487.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:47.959Z,1516651487.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:47.979Z,1516651487.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:48.348Z,1516651488.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:48.380Z,1516651488.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:48.403Z,1516651488.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:48.755Z,1516651488.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:48.790Z,1516651488.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:48.807Z,1516651488.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:49.154Z,1516651489.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:49.188Z,1516651489.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:49.567Z,1516651489.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:49.588Z,1516651489.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:49.603Z,1516651489.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:49.975Z,1516651489.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:49.989Z,1516651489.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:50.379Z,1516651490.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:50.399Z,1516651490.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:50.403Z,1516651490.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:50.753Z,1516651490.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:50.792Z,1516651490.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:50.803Z,1516651490.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:51.153Z,1516651491.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:51.168Z,1516651491.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:51.553Z,1516651491.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:51.572Z,1516651491.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:51.950Z,1516651491.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:51.965Z,1516651491.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:52.407Z,1516651492.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:52.451Z,1516651492.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:52.767Z,1516651492.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:52.782Z,1516651492.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:53.163Z,1516651493.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:53.178Z,1516651493.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:53.563Z,1516651493.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:53.578Z,1516651493.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:53.643Z,1516651493.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:53.960Z,1516651493.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:53.975Z,1516651493.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:54.397Z,1516651494.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:54.437Z,1516651494.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:54.439Z,1516651494.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:54.754Z,1516651494.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:54.769Z,1516651494.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:54.847Z,1516651494.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:55.153Z,1516651495.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:55.172Z,1516651495.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:55.567Z,1516651495.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:55.590Z,1516651495.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:55.643Z,1516651495.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:55.967Z,1516651495.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:55.991Z,1516651495.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:56.364Z,1516651496.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:56.397Z,1516651496.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:56.439Z,1516651496.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:56.754Z,1516651496.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:56.768Z,1516651496.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:56.843Z,1516651496.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:57.153Z,1516651497.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:57.168Z,1516651497.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:57.550Z,1516651497.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:57.565Z,1516651497.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:57.639Z,1516651497.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:57.954Z,1516651497.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:57.969Z,1516651497.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:58.357Z,1516651498.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:58.384Z,1516651498.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:58.435Z,1516651498.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:58.768Z,1516651498.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:58.782Z,1516651498.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:58.839Z,1516651498.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:59.165Z,1516651499.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:59.180Z,1516651499.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:59.566Z,1516651499.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:59.580Z,1516651499.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:04:59.635Z,1516651499.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:59.953Z,1516651499.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:04:59.972Z,1516651499.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:00.361Z,1516651500.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:00.384Z,1516651500.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:00.431Z,1516651500.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:00.766Z,1516651500.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:00.781Z,1516651500.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:00.835Z,1516651500.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:01.149Z,1516651501.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:01.174Z,1516651501.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:01.574Z,1516651501.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:01.589Z,1516651501.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:01.631Z,1516651501.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:01.975Z,1516651501.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:01.989Z,1516651501.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:02.392Z,1516651502.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:02.407Z,1516651502.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:02.427Z,1516651502.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:02.754Z,1516651502.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:02.768Z,1516651502.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:02.832Z,1516651502.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:03.154Z,1516651503.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:03.169Z,1516651503.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:03.558Z,1516651503.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:03.573Z,1516651503.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:03.627Z,1516651503.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:03.958Z,1516651503.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:03.973Z,1516651503.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:04.362Z,1516651504.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:04.377Z,1516651504.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:04.423Z,1516651504.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:04.764Z,1516651504.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:04.779Z,1516651504.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:04.827Z,1516651504.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:05.168Z,1516651505.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:05.182Z,1516651505.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:05.564Z,1516651505.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:05.584Z,1516651505.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:05.623Z,1516651505.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:05.959Z,1516651505.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:05.989Z,1516651505.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:06.393Z,1516651506.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:06.419Z,1516651506.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:06.448Z,1516651506.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:06.751Z,1516651506.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:06.766Z,1516651506.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:06.855Z,1516651506.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:07.157Z,1516651507.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:07.198Z,1516651507.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:07.567Z,1516651507.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:07.592Z,1516651507.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:07.651Z,1516651507.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:07.967Z,1516651507.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:07.992Z,1516651507.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:08.422Z,1516651508.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:08.483Z,1516651508.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:08.516Z,1516651508.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:08.761Z,1516651508.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:08.776Z,1516651508.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:08.915Z,1516651508.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:09.162Z,1516651509.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:09.182Z,1516651509.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:09.554Z,1516651509.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:09.584Z,1516651509.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:09.711Z,1516651509.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:09.951Z,1516651509.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:09.984Z,1516651509.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:10.361Z,1516651510.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:10.396Z,1516651510.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:10.499Z,1516651510.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:10.767Z,1516651510.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:10.800Z,1516651510.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:11.164Z,1516651511.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:11.196Z,1516651511.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:11.295Z,1516651511.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:11.564Z,1516651511.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:11.600Z,1516651511.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:11.948Z,1516651511.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:11.984Z,1516651511.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:12.092Z,1516651512.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:12.365Z,1516651512.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:12.389Z,1516651512.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:12.503Z,1516651512.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:12.754Z,1516651512.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:12.791Z,1516651512.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:13.152Z,1516651513.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:13.192Z,1516651513.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:13.299Z,1516651513.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:13.567Z,1516651513.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:13.596Z,1516651513.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:13.967Z,1516651513.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:13.993Z,1516651513.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:14.095Z,1516651514.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:14.380Z,1516651514.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:14.409Z,1516651514.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:14.523Z,1516651514.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:14.756Z,1516651514.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:14.770Z,1516651514.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:15.157Z,1516651515.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:15.180Z,1516651515.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:15.319Z,1516651515.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:15.561Z,1516651515.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:15.576Z,1516651515.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:15.958Z,1516651515.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:15.987Z,1516651515.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:16.115Z,1516651516.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:16.367Z,1516651516.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:16.388Z,1516651516.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:16.519Z,1516651516.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:16.771Z,1516651516.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:16.786Z,1516651516.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:17.174Z,1516651517.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:17.196Z,1516651517.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:17.315Z,1516651517.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:17.565Z,1516651517.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:17.585Z,1516651517.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:17.948Z,1516651517.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:17.980Z,1516651517.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:18.112Z,1516651518.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:18.368Z,1516651518.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:18.384Z,1516651518.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:18.547Z,1516651518.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:18.754Z,1516651518.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:18.784Z,1516651518.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:19.149Z,1516651519.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:19.174Z,1516651519.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:19.343Z,1516651519.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:19.577Z,1516651519.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:19.596Z,1516651519.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:19.969Z,1516651519.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:19.989Z,1516651519.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:20.139Z,1516651520.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:20.374Z,1516651520.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:20.454Z,1516651520.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:20.748Z,1516651520.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:20.773Z,1516651520.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:20.887Z,1516651520.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:21.154Z,1516651521.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:21.180Z,1516651521.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:21.549Z,1516651521.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:21.574Z,1516651521.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:21.683Z,1516651521.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:21.954Z,1516651521.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:21.980Z,1516651521.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:22.353Z,1516651522.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:22.434Z,1516651522.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:22.480Z,1516651522.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:22.767Z,1516651522.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:22.797Z,1516651522.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:22.883Z,1516651522.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:23.167Z,1516651523.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:23.196Z,1516651523.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:23.567Z,1516651523.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:23.596Z,1516651523.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:23.680Z,1516651523.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:23.953Z,1516651523.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:23.968Z,1516651523.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:24.365Z,1516651524.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:24.393Z,1516651524.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:24.476Z,1516651524.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:24.758Z,1516651524.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:24.773Z,1516651524.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:24.879Z,1516651524.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:25.149Z,1516651525.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:25.164Z,1516651525.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:25.563Z,1516651525.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:25.578Z,1516651525.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:25.675Z,1516651525.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:25.967Z,1516651525.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:25.982Z,1516651525.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:26.371Z,1516651526.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:26.386Z,1516651526.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:26.471Z,1516651526.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:26.753Z,1516651526.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:26.780Z,1516651526.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:26.875Z,1516651526.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:27.161Z,1516651527.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:27.176Z,1516651527.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:27.557Z,1516651527.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:27.580Z,1516651527.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:27.671Z,1516651527.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:27.957Z,1516651527.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:27.975Z,1516651527.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:28.365Z,1516651528.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:28.388Z,1516651528.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:28.467Z,1516651528.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:28.769Z,1516651528.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:28.788Z,1516651528.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:28.871Z,1516651528.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:29.169Z,1516651529.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:29.188Z,1516651529.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:29.566Z,1516651529.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:29.581Z,1516651529.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:29.667Z,1516651529.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:29.951Z,1516651529.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:29.973Z,1516651529.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:30.365Z,1516651530.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:30.379Z,1516651530.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:30.463Z,1516651530.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:30.758Z,1516651530.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:30.785Z,1516651530.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:30.867Z,1516651530.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:31.149Z,1516651531.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:31.184Z,1516651531.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:31.574Z,1516651531.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:31.589Z,1516651531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:31.663Z,1516651531.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:31.979Z,1516651531.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:31.996Z,1516651531.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:32.381Z,1516651532.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:32.396Z,1516651532.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:32.460Z,1516651532.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:32.753Z,1516651532.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:32.778Z,1516651532.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:32.863Z,1516651532.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:33.150Z,1516651533.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:33.181Z,1516651533.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:33.553Z,1516651533.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:33.583Z,1516651533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:33.659Z,1516651533.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:33.950Z,1516651533.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:33.973Z,1516651533.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:34.354Z,1516651534.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:34.381Z,1516651534.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:34.457Z,1516651534.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:34.763Z,1516651534.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:34.778Z,1516651534.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:34.887Z,1516651534.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:35.163Z,1516651535.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:35.178Z,1516651535.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:35.571Z,1516651535.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:35.602Z,1516651535.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:35.683Z,1516651535.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:35.954Z,1516651535.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:35.977Z,1516651535.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:36.355Z,1516651536.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:36.374Z,1516651536.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:36.479Z,1516651536.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:36.762Z,1516651536.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:36.789Z,1516651536.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:36.883Z,1516651536.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:37.149Z,1516651537.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:37.198Z,1516651537.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:37.575Z,1516651537.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:37.589Z,1516651537.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:37.679Z,1516651537.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:37.971Z,1516651537.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:37.994Z,1516651537.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:38.385Z,1516651538.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:38.404Z,1516651538.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:38.475Z,1516651538.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:38.753Z,1516651538.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:38.784Z,1516651538.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:38.879Z,1516651538.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:39.154Z,1516651539.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:39.189Z,1516651539.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:39.550Z,1516651539.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:39.577Z,1516651539.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:39.675Z,1516651539.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:39.953Z,1516651539.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:39.984Z,1516651539.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:40.472Z,1516651540.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:40.875Z,1516651540.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:41.672Z,1516651541.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:42.467Z,1516651542.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:42.871Z,1516651542.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:43.239Z,1516651543.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:43.253Z,1516651543.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:43.359Z,1516651543.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:43.396Z,1516651543.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:43.667Z,1516651543.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:43.715Z,1516651543.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:43.737Z,1516651543.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:44.164Z,1516651544.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:44.203Z,1516651544.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:44.463Z,1516651544.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:44.502Z,1516651544.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:44.532Z,1516651544.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:44.867Z,1516651544.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:44.904Z,1516651544.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:44.932Z,1516651544.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:45.301Z,1516651545.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:45.324Z,1516651545.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:45.663Z,1516651545.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:45.712Z,1516651545.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:45.740Z,1516651545.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:46.117Z,1516651546.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:46.204Z,1516651546.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:46.459Z,1516651546.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:46.514Z,1516651546.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:46.552Z,1516651546.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:46.863Z,1516651546.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:46.897Z,1516651546.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:46.936Z,1516651546.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:47.297Z,1516651547.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:47.327Z,1516651547.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:47.340Z,1516651547.340 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:05:47.661Z,1516651547.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:47.698Z,1516651547.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:47.735Z,1516651547.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:48.097Z,1516651548.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:48.123Z,1516651548.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:48.457Z,1516651548.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:48.532Z,1516651548.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:48.552Z,1516651548.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:48.899Z,1516651548.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:48.915Z,1516651548.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:48.948Z,1516651548.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:49.315Z,1516651549.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:49.336Z,1516651549.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:49.696Z,1516651549.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:49.698Z,1516651549.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:49.725Z,1516651549.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:50.098Z,1516651550.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:50.112Z,1516651550.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:50.492Z,1516651550.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:50.529Z,1516651550.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:50.557Z,1516651550.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:50.903Z,1516651550.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:50.916Z,1516651550.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:50.944Z,1516651550.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:51.319Z,1516651551.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:51.343Z,1516651551.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:51.701Z,1516651551.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:51.706Z,1516651551.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:51.721Z,1516651551.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:52.152Z,1516651552.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:52.188Z,1516651552.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:52.495Z,1516651552.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:52.514Z,1516651552.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:52.529Z,1516651552.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:52.899Z,1516651552.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:52.911Z,1516651552.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:52.932Z,1516651552.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:53.312Z,1516651553.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:53.326Z,1516651553.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:53.696Z,1516651553.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:53.702Z,1516651553.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:53.740Z,1516651553.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:54.128Z,1516651554.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:54.180Z,1516651554.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:54.491Z,1516651554.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:54.516Z,1516651554.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:54.539Z,1516651554.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:54.895Z,1516651554.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:54.921Z,1516651554.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:54.936Z,1516651554.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:55.318Z,1516651555.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:55.333Z,1516651555.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:55.693Z,1516651555.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:55.699Z,1516651555.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:55.740Z,1516651555.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:56.121Z,1516651556.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:56.188Z,1516651556.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:56.487Z,1516651556.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:56.512Z,1516651556.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:56.548Z,1516651556.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:56.891Z,1516651556.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:56.915Z,1516651556.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:56.946Z,1516651556.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:57.316Z,1516651557.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:57.347Z,1516651557.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:57.687Z,1516651557.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:57.703Z,1516651557.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:57.732Z,1516651557.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:58.125Z,1516651558.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:58.179Z,1516651558.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:58.483Z,1516651558.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:58.516Z,1516651558.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:58.540Z,1516651558.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:58.887Z,1516651558.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:58.919Z,1516651558.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:58.944Z,1516651558.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:59.311Z,1516651559.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:59.344Z,1516651559.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:05:59.683Z,1516651559.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:59.698Z,1516651559.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:05:59.713Z,1516651559.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:00.099Z,1516651560.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:00.117Z,1516651560.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:00.479Z,1516651560.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:00.501Z,1516651560.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:00.516Z,1516651560.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:00.883Z,1516651560.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:00.915Z,1516651560.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:00.930Z,1516651560.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:01.311Z,1516651561.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:01.326Z,1516651561.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:01.679Z,1516651561.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:01.712Z,1516651561.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:01.727Z,1516651561.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:02.100Z,1516651562.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:02.128Z,1516651562.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:02.476Z,1516651562.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:02.535Z,1516651562.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:02.567Z,1516651562.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:02.901Z,1516651562.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:02.928Z,1516651562.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:02.955Z,1516651562.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:03.299Z,1516651563.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:03.336Z,1516651563.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:03.714Z,1516651563.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:03.737Z,1516651563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:03.751Z,1516651563.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:04.121Z,1516651564.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:04.136Z,1516651564.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:04.533Z,1516651564.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:04.547Z,1516651564.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:04.569Z,1516651564.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:04.898Z,1516651564.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:04.929Z,1516651564.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:04.975Z,1516651564.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:05.297Z,1516651565.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:05.328Z,1516651565.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:05.697Z,1516651565.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:05.733Z,1516651565.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:05.771Z,1516651565.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:06.097Z,1516651566.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:06.192Z,1516651566.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:06.497Z,1516651566.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:06.513Z,1516651566.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:06.567Z,1516651566.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:06.912Z,1516651566.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:06.938Z,1516651566.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:06.971Z,1516651566.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:07.311Z,1516651567.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:07.344Z,1516651567.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:07.711Z,1516651567.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:07.743Z,1516651567.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:07.767Z,1516651567.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:08.100Z,1516651568.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:08.191Z,1516651568.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:08.501Z,1516651568.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:08.521Z,1516651568.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:08.563Z,1516651568.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:08.899Z,1516651568.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:08.922Z,1516651568.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:08.968Z,1516651568.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:09.301Z,1516651569.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:09.323Z,1516651569.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:09.715Z,1516651569.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:09.734Z,1516651569.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:09.763Z,1516651569.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:10.130Z,1516651570.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:10.192Z,1516651570.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:10.518Z,1516651570.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:10.533Z,1516651570.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:10.559Z,1516651570.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:10.897Z,1516651570.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:10.930Z,1516651570.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:10.963Z,1516651570.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:11.297Z,1516651571.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:11.327Z,1516651571.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:11.697Z,1516651571.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:11.729Z,1516651571.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:11.759Z,1516651571.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:12.097Z,1516651572.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:12.183Z,1516651572.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:12.497Z,1516651572.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:12.516Z,1516651572.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:12.555Z,1516651572.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:12.911Z,1516651572.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:12.926Z,1516651572.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:12.959Z,1516651572.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:13.315Z,1516651573.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:13.349Z,1516651573.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:13.715Z,1516651573.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:13.730Z,1516651573.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:13.755Z,1516651573.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:14.101Z,1516651574.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:14.133Z,1516651574.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:14.503Z,1516651574.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:14.518Z,1516651574.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:14.551Z,1516651574.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:14.901Z,1516651574.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:14.927Z,1516651574.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:14.955Z,1516651574.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:15.301Z,1516651575.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:15.328Z,1516651575.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:15.716Z,1516651575.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:15.731Z,1516651575.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:15.752Z,1516651575.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:16.115Z,1516651576.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:16.134Z,1516651576.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:16.543Z,1516651576.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:16.553Z,1516651576.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:16.570Z,1516651576.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:16.901Z,1516651576.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:16.922Z,1516651576.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:16.991Z,1516651576.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:17.300Z,1516651577.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:17.343Z,1516651577.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:17.697Z,1516651577.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:17.724Z,1516651577.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:17.787Z,1516651577.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:18.098Z,1516651578.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:18.113Z,1516651578.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:18.541Z,1516651578.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:18.576Z,1516651578.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:18.583Z,1516651578.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:18.911Z,1516651578.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:18.935Z,1516651578.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:18.987Z,1516651578.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:19.324Z,1516651579.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:19.339Z,1516651579.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:19.715Z,1516651579.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:19.738Z,1516651579.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:19.783Z,1516651579.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:20.103Z,1516651580.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:20.191Z,1516651580.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:20.501Z,1516651580.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:20.515Z,1516651580.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:20.579Z,1516651580.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:20.897Z,1516651580.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:20.920Z,1516651580.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:20.984Z,1516651580.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:21.301Z,1516651581.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:21.328Z,1516651581.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:21.711Z,1516651581.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:21.726Z,1516651581.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:21.779Z,1516651581.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:22.111Z,1516651582.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:22.126Z,1516651582.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:22.518Z,1516651582.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:22.533Z,1516651582.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:22.575Z,1516651582.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:22.909Z,1516651582.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:22.930Z,1516651582.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:22.979Z,1516651582.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:23.297Z,1516651583.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:23.329Z,1516651583.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:23.697Z,1516651583.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:23.736Z,1516651583.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:23.775Z,1516651583.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:24.098Z,1516651584.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:24.129Z,1516651584.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:24.129Z,1516651584.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-01-22T20:06:24.129Z,1516651584.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:06:24.156Z,1516651584.156 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:24.156Z,1516651584.156 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-01-22T20:06:24.156Z,1516651584.156 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:06:24.169Z,1516651584.169 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:24.169Z,1516651584.169 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-01-22T20:06:24.169Z,1516651584.169 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:06:24.231Z,1516651584.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:06:24.231Z,1516651584.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:06:24.232Z,1516651584.232 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:06:24.500Z,1516651584.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:24.537Z,1516651584.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:06:24.537Z,1516651584.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-01-22T20:06:24.538Z,1516651584.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:06:24.538Z,1516651584.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-01-22T20:06:24.543Z,1516651584.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:06:24.543Z,1516651584.543 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-01-22T20:06:24.572Z,1516651584.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:24.911Z,1516651584.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:24.925Z,1516651584.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:06:24.926Z,1516651584.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:06:24.926Z,1516651584.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:06:24.926Z,1516651584.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:06:24.927Z,1516651584.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:06:24.927Z,1516651584.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:06:24.928Z,1516651584.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:06:24.928Z,1516651584.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:06:24.928Z,1516651584.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:06:24.975Z,1516651584.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:25.312Z,1516651585.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:25.328Z,1516651585.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:25.712Z,1516651585.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:25.727Z,1516651585.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:25.771Z,1516651585.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:26.101Z,1516651586.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:26.123Z,1516651586.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:26.497Z,1516651586.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:26.532Z,1516651586.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:26.567Z,1516651586.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:26.897Z,1516651586.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:26.936Z,1516651586.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:26.971Z,1516651586.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:27.297Z,1516651587.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:27.312Z,1516651587.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:27.711Z,1516651587.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:27.742Z,1516651587.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:27.768Z,1516651587.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:28.115Z,1516651588.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:28.146Z,1516651588.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:28.519Z,1516651588.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:28.550Z,1516651588.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:28.563Z,1516651588.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:28.902Z,1516651588.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:28.935Z,1516651588.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:28.967Z,1516651588.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:29.305Z,1516651589.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:29.336Z,1516651589.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:29.697Z,1516651589.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:29.712Z,1516651589.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:29.763Z,1516651589.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:30.102Z,1516651590.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:30.117Z,1516651590.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:30.549Z,1516651590.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:30.559Z,1516651590.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:30.573Z,1516651590.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:30.911Z,1516651590.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:30.926Z,1516651590.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:31.007Z,1516651591.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:31.311Z,1516651591.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:31.326Z,1516651591.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:31.711Z,1516651591.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:31.726Z,1516651591.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:31.803Z,1516651591.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:32.101Z,1516651592.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:32.126Z,1516651592.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:32.518Z,1516651592.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:32.584Z,1516651592.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:32.599Z,1516651592.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:32.897Z,1516651592.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:32.931Z,1516651592.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:33.004Z,1516651593.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:33.297Z,1516651593.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:33.332Z,1516651593.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:33.723Z,1516651593.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:33.737Z,1516651593.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:33.799Z,1516651593.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:34.126Z,1516651594.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:34.141Z,1516651594.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:34.511Z,1516651594.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:34.542Z,1516651594.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:34.595Z,1516651594.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:34.900Z,1516651594.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:34.924Z,1516651594.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:34.999Z,1516651594.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:35.301Z,1516651595.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:35.322Z,1516651595.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:35.700Z,1516651595.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:35.728Z,1516651595.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:35.795Z,1516651595.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:36.105Z,1516651596.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:36.120Z,1516651596.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:36.509Z,1516651596.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:36.532Z,1516651596.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:36.591Z,1516651596.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:36.916Z,1516651596.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:36.939Z,1516651596.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:36.995Z,1516651596.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:37.316Z,1516651597.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:37.337Z,1516651597.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:37.716Z,1516651597.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:37.745Z,1516651597.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:37.791Z,1516651597.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:38.097Z,1516651598.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:38.132Z,1516651598.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:38.509Z,1516651598.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:38.524Z,1516651598.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:38.587Z,1516651598.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:38.906Z,1516651598.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:38.921Z,1516651598.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:38.991Z,1516651598.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:39.302Z,1516651599.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:39.324Z,1516651599.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:39.681Z,1516651599.681 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T20:06:39.681Z,1516651599.681 [NAL9602] Data Fault, FailCount= 1
2018-01-22T20:06:39.681Z,1516651599.681 [NAL9602](ERROR): Data Fault
2018-01-22T20:06:39.702Z,1516651599.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:39.736Z,1516651599.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:39.761Z,1516651599.761 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T20:06:39.788Z,1516651599.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:40.083Z,1516651600.083 [NAL9602](INFO): Powering down
2018-01-22T20:06:40.106Z,1516651600.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:40.133Z,1516651600.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:40.583Z,1516651600.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:40.987Z,1516651600.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:41.783Z,1516651601.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:42.579Z,1516651602.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:42.983Z,1516651602.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:43.382Z,1516651603.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:43.397Z,1516651603.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:43.500Z,1516651603.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:43.525Z,1516651603.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:43.546Z,1516651603.546 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T20:06:43.546Z,1516651603.546 [NAL9602] No Fault, FailCount= 1
2018-01-22T20:06:43.779Z,1516651603.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:43.866Z,1516651603.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:43.889Z,1516651603.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:44.268Z,1516651604.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:44.289Z,1516651604.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:44.576Z,1516651604.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:44.691Z,1516651604.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:44.739Z,1516651604.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:44.979Z,1516651604.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:45.075Z,1516651605.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:45.106Z,1516651605.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:45.473Z,1516651605.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:45.519Z,1516651605.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:45.775Z,1516651605.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:45.865Z,1516651605.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:45.888Z,1516651605.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:46.281Z,1516651606.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:46.305Z,1516651606.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:46.572Z,1516651606.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:46.690Z,1516651606.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:46.716Z,1516651606.716 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:06:46.716Z,1516651606.716 [BPC1] Communications Fault, FailCount= 1
2018-01-22T20:06:46.716Z,1516651606.716 [BPC1](ERROR): Communications Fault
2018-01-22T20:06:46.734Z,1516651606.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:46.767Z,1516651606.767 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:06:47.003Z,1516651607.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:47.075Z,1516651607.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:47.107Z,1516651607.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:47.479Z,1516651607.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:47.515Z,1516651607.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:47.799Z,1516651607.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:47.870Z,1516651607.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:47.889Z,1516651607.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:47.934Z,1516651607.934 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:06:47.934Z,1516651607.934 [BPC1] No Fault, FailCount= 1
2018-01-22T20:06:48.289Z,1516651608.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:48.372Z,1516651608.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:48.595Z,1516651608.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:48.691Z,1516651608.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:48.706Z,1516651608.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:48.999Z,1516651608.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:49.071Z,1516651609.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:49.136Z,1516651609.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:49.471Z,1516651609.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:49.490Z,1516651609.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:49.795Z,1516651609.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:49.863Z,1516651609.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:49.920Z,1516651609.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:50.267Z,1516651610.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:50.318Z,1516651610.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:50.591Z,1516651610.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:50.692Z,1516651610.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:50.725Z,1516651610.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:50.995Z,1516651610.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:51.070Z,1516651611.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:51.089Z,1516651611.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:51.462Z,1516651611.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:51.500Z,1516651611.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:51.791Z,1516651611.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:51.862Z,1516651611.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:51.902Z,1516651611.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:52.278Z,1516651612.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:52.330Z,1516651612.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:52.587Z,1516651612.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:52.669Z,1516651612.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:52.696Z,1516651612.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:52.991Z,1516651612.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:53.070Z,1516651613.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:53.089Z,1516651613.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:53.478Z,1516651613.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:53.526Z,1516651613.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:53.788Z,1516651613.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:53.862Z,1516651613.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:53.901Z,1516651613.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:54.273Z,1516651614.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:54.301Z,1516651614.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:54.583Z,1516651614.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:54.663Z,1516651614.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:54.712Z,1516651614.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:54.987Z,1516651614.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:55.075Z,1516651615.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:55.111Z,1516651615.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:55.461Z,1516651615.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:55.475Z,1516651615.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:55.783Z,1516651615.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:55.865Z,1516651615.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:55.880Z,1516651615.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:56.306Z,1516651616.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:56.344Z,1516651616.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:56.581Z,1516651616.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:56.661Z,1516651616.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:56.680Z,1516651616.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:56.987Z,1516651616.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:57.060Z,1516651617.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:57.096Z,1516651617.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:57.460Z,1516651617.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:57.480Z,1516651617.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:57.785Z,1516651617.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:57.860Z,1516651617.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:57.875Z,1516651617.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:58.265Z,1516651618.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:58.279Z,1516651618.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:58.581Z,1516651618.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:58.683Z,1516651618.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:58.708Z,1516651618.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:58.999Z,1516651618.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:59.060Z,1516651619.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:59.080Z,1516651619.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:59.464Z,1516651619.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:59.484Z,1516651619.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:06:59.795Z,1516651619.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:59.871Z,1516651619.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:06:59.886Z,1516651619.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:00.264Z,1516651620.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:00.278Z,1516651620.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:00.593Z,1516651620.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:00.669Z,1516651620.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:00.688Z,1516651620.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:00.999Z,1516651620.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:01.065Z,1516651621.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:01.101Z,1516651621.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:01.466Z,1516651621.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:01.481Z,1516651621.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:01.797Z,1516651621.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:01.868Z,1516651621.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:01.892Z,1516651621.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:02.288Z,1516651622.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:02.320Z,1516651622.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:02.591Z,1516651622.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:02.665Z,1516651622.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:02.684Z,1516651622.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:02.995Z,1516651622.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:03.063Z,1516651623.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:03.088Z,1516651623.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:03.463Z,1516651623.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:03.507Z,1516651623.507 [BPC1](INFO): Initialized
2018-01-22T20:07:03.513Z,1516651623.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:03.791Z,1516651623.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:03.867Z,1516651623.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:03.881Z,1516651623.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:04.278Z,1516651624.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:04.305Z,1516651624.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:04.587Z,1516651624.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:04.661Z,1516651624.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:04.692Z,1516651624.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:04.991Z,1516651624.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:05.060Z,1516651625.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:05.091Z,1516651625.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:05.460Z,1516651625.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:05.491Z,1516651625.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:05.787Z,1516651625.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:05.856Z,1516651625.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:05.887Z,1516651625.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:06.288Z,1516651626.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:06.314Z,1516651626.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:06.583Z,1516651626.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:06.660Z,1516651626.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:06.688Z,1516651626.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:06.987Z,1516651626.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:07.060Z,1516651627.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:07.095Z,1516651627.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:07.460Z,1516651627.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:07.483Z,1516651627.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:07.783Z,1516651627.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:07.860Z,1516651627.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:07.896Z,1516651627.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:08.290Z,1516651628.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:08.321Z,1516651628.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:08.579Z,1516651628.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:08.660Z,1516651628.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:08.680Z,1516651628.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:08.983Z,1516651628.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:09.060Z,1516651629.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:09.080Z,1516651629.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:09.464Z,1516651629.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:09.483Z,1516651629.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:09.779Z,1516651629.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:09.860Z,1516651629.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:09.875Z,1516651629.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:10.244Z,1516651630.244 [NAL9602](INFO): Powering up NAL9602
2018-01-22T20:07:10.273Z,1516651630.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:10.336Z,1516651630.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:10.577Z,1516651630.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:10.673Z,1516651630.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:10.708Z,1516651630.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:10.979Z,1516651630.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:11.060Z,1516651631.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:11.080Z,1516651631.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:11.460Z,1516651631.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:11.480Z,1516651631.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:11.775Z,1516651631.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:11.863Z,1516651631.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:11.884Z,1516651631.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:12.264Z,1516651632.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:12.279Z,1516651632.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:12.581Z,1516651632.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:12.672Z,1516651632.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:12.708Z,1516651632.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:13.023Z,1516651633.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:13.066Z,1516651633.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:13.081Z,1516651633.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:13.468Z,1516651633.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:13.483Z,1516651633.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:13.819Z,1516651633.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:13.870Z,1516651633.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:13.897Z,1516651633.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:14.265Z,1516651634.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:14.288Z,1516651634.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:14.616Z,1516651634.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:14.660Z,1516651634.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:14.700Z,1516651634.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:15.023Z,1516651635.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:15.060Z,1516651635.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:15.087Z,1516651635.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:15.456Z,1516651635.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:15.491Z,1516651635.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:15.821Z,1516651635.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:15.856Z,1516651635.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:15.888Z,1516651635.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:16.298Z,1516651636.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:16.341Z,1516651636.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:16.615Z,1516651636.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:16.668Z,1516651636.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:16.704Z,1516651636.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:17.019Z,1516651637.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:17.060Z,1516651637.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:17.091Z,1516651637.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:17.460Z,1516651637.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:17.496Z,1516651637.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:17.815Z,1516651637.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:17.860Z,1516651637.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:17.880Z,1516651637.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:18.303Z,1516651638.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:18.349Z,1516651638.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:18.611Z,1516651638.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:18.664Z,1516651638.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:18.684Z,1516651638.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:19.015Z,1516651639.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:19.066Z,1516651639.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:19.081Z,1516651639.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:19.460Z,1516651639.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:19.474Z,1516651639.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:19.811Z,1516651639.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:19.867Z,1516651639.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:19.881Z,1516651639.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:20.293Z,1516651640.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:20.328Z,1516651640.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:20.607Z,1516651640.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:20.683Z,1516651640.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:20.704Z,1516651640.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:21.011Z,1516651641.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:21.058Z,1516651641.058 [NAL9602](INFO): NAL9602 initialized
2018-01-22T20:07:21.074Z,1516651641.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:21.089Z,1516651641.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:21.468Z,1516651641.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:21.488Z,1516651641.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:21.807Z,1516651641.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:21.903Z,1516651641.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:21.917Z,1516651641.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:22.310Z,1516651642.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:22.334Z,1516651642.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:22.603Z,1516651642.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:22.676Z,1516651642.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:22.691Z,1516651642.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:23.007Z,1516651643.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:23.069Z,1516651643.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:23.092Z,1516651643.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:23.466Z,1516651643.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:23.488Z,1516651643.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:23.806Z,1516651643.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:23.869Z,1516651643.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:23.884Z,1516651643.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:24.270Z,1516651644.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:24.352Z,1516651644.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:24.599Z,1516651644.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:24.673Z,1516651644.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:24.696Z,1516651644.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:25.003Z,1516651645.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:25.083Z,1516651645.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:25.098Z,1516651645.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:25.483Z,1516651645.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:25.498Z,1516651645.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:25.799Z,1516651645.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:25.879Z,1516651645.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:25.907Z,1516651645.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:26.261Z,1516651646.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:26.295Z,1516651646.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:26.597Z,1516651646.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:26.668Z,1516651646.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:26.705Z,1516651646.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:27.043Z,1516651647.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:27.063Z,1516651647.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:27.090Z,1516651647.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:27.468Z,1516651647.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:27.503Z,1516651647.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:27.839Z,1516651647.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:27.876Z,1516651647.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:27.907Z,1516651647.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:28.276Z,1516651648.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:28.307Z,1516651648.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:28.647Z,1516651648.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:28.680Z,1516651648.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:28.717Z,1516651648.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:29.054Z,1516651649.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:29.065Z,1516651649.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:29.081Z,1516651649.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:29.469Z,1516651649.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:29.484Z,1516651649.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:29.854Z,1516651649.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:29.896Z,1516651649.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:30.355Z,1516651650.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:30.647Z,1516651650.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:30.694Z,1516651650.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:31.051Z,1516651651.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:31.112Z,1516651651.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:31.505Z,1516651651.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:31.847Z,1516651651.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:31.901Z,1516651651.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:32.333Z,1516651652.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:32.643Z,1516651652.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:32.704Z,1516651652.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:33.048Z,1516651653.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:33.096Z,1516651653.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:33.461Z,1516651653.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:33.497Z,1516651653.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:33.843Z,1516651653.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:33.887Z,1516651653.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:33.902Z,1516651653.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:34.313Z,1516651654.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:34.352Z,1516651654.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:34.639Z,1516651654.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:34.709Z,1516651654.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:35.043Z,1516651655.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:35.085Z,1516651655.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:35.488Z,1516651655.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:35.839Z,1516651655.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:35.876Z,1516651655.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:36.363Z,1516651656.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:36.643Z,1516651656.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:36.679Z,1516651656.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:37.047Z,1516651657.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:37.099Z,1516651657.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:37.494Z,1516651657.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:37.843Z,1516651657.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:37.891Z,1516651657.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:38.284Z,1516651658.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:38.639Z,1516651658.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:38.696Z,1516651658.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:39.043Z,1516651659.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:39.093Z,1516651659.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:39.495Z,1516651659.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:39.839Z,1516651659.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:39.946Z,1516651659.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:40.300Z,1516651660.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:40.648Z,1516651660.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:41.067Z,1516651661.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:41.863Z,1516651661.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:42.659Z,1516651662.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:43.087Z,1516651663.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:43.543Z,1516651663.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:43.660Z,1516651663.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:43.883Z,1516651663.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:44.033Z,1516651664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:44.451Z,1516651664.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:44.679Z,1516651664.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:44.840Z,1516651664.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:45.083Z,1516651665.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:45.222Z,1516651665.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:45.620Z,1516651665.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:45.881Z,1516651665.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:46.008Z,1516651666.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:46.447Z,1516651666.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:46.675Z,1516651666.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:46.831Z,1516651666.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:47.079Z,1516651667.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:47.209Z,1516651667.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:47.609Z,1516651667.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:47.875Z,1516651667.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:48.034Z,1516651668.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:48.428Z,1516651668.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:48.671Z,1516651668.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:48.821Z,1516651668.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:49.075Z,1516651669.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:49.215Z,1516651669.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:49.608Z,1516651669.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:49.871Z,1516651669.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:50.008Z,1516651670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:50.409Z,1516651670.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:50.667Z,1516651670.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:50.829Z,1516651670.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:51.071Z,1516651671.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:51.220Z,1516651671.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:51.628Z,1516651671.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:51.867Z,1516651671.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:52.022Z,1516651672.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:52.420Z,1516651672.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:52.663Z,1516651672.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:52.816Z,1516651672.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:53.067Z,1516651673.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:53.204Z,1516651673.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:53.607Z,1516651673.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:53.863Z,1516651673.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:54.024Z,1516651674.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:54.420Z,1516651674.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:54.661Z,1516651674.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:54.836Z,1516651674.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:55.075Z,1516651675.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:55.215Z,1516651675.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:55.609Z,1516651675.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:55.871Z,1516651675.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:56.016Z,1516651676.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:56.414Z,1516651676.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:56.669Z,1516651676.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:56.820Z,1516651676.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:57.079Z,1516651677.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:57.220Z,1516651677.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:57.626Z,1516651677.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:57.875Z,1516651677.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:58.004Z,1516651678.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:58.404Z,1516651678.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:58.671Z,1516651678.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:58.804Z,1516651678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:59.075Z,1516651679.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:07:59.211Z,1516651679.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:59.604Z,1516651679.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:07:59.871Z,1516651679.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:00.024Z,1516651680.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:00.428Z,1516651680.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:00.667Z,1516651680.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:00.827Z,1516651680.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:01.071Z,1516651681.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:01.215Z,1516651681.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:01.610Z,1516651681.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:01.867Z,1516651681.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:02.008Z,1516651682.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:02.409Z,1516651682.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:02.663Z,1516651682.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:02.821Z,1516651682.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:03.067Z,1516651683.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:03.224Z,1516651683.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:03.626Z,1516651683.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:03.863Z,1516651683.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:04.013Z,1516651684.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:04.413Z,1516651684.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:04.659Z,1516651684.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:04.815Z,1516651684.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:04.830Z,1516651684.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:05.063Z,1516651685.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:05.199Z,1516651685.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:05.228Z,1516651685.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:05.606Z,1516651685.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:05.621Z,1516651685.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:05.860Z,1516651685.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:05.986Z,1516651685.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:06.009Z,1516651686.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:06.416Z,1516651686.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:06.439Z,1516651686.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:06.655Z,1516651686.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:06.803Z,1516651686.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:06.825Z,1516651686.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:07.059Z,1516651687.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:07.203Z,1516651687.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:07.232Z,1516651687.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:07.595Z,1516651687.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:07.622Z,1516651687.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:07.855Z,1516651687.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:07.986Z,1516651687.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:08.001Z,1516651688.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:08.385Z,1516651688.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:08.400Z,1516651688.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:08.653Z,1516651688.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:08.800Z,1516651688.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:08.830Z,1516651688.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:09.107Z,1516651689.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:09.203Z,1516651689.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:09.228Z,1516651689.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:09.604Z,1516651689.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:09.630Z,1516651689.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:09.903Z,1516651689.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:09.984Z,1516651689.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:10.004Z,1516651690.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:10.388Z,1516651690.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:10.408Z,1516651690.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:10.699Z,1516651690.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:10.807Z,1516651690.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:10.832Z,1516651690.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:11.103Z,1516651691.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:11.195Z,1516651691.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:11.210Z,1516651691.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:11.603Z,1516651691.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:11.630Z,1516651691.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:11.899Z,1516651691.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:11.990Z,1516651691.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:12.005Z,1516651692.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:12.391Z,1516651692.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:12.411Z,1516651692.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:12.695Z,1516651692.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:12.807Z,1516651692.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:12.822Z,1516651692.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:13.099Z,1516651693.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:13.199Z,1516651693.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:13.220Z,1516651693.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:13.599Z,1516651693.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:13.620Z,1516651693.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:13.895Z,1516651693.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:13.993Z,1516651693.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:14.019Z,1516651694.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:14.395Z,1516651694.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:14.414Z,1516651694.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:14.691Z,1516651694.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:14.800Z,1516651694.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:14.824Z,1516651694.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:15.095Z,1516651695.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:15.206Z,1516651695.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:15.221Z,1516651695.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:15.603Z,1516651695.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:15.632Z,1516651695.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:15.891Z,1516651695.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:15.986Z,1516651695.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:16.016Z,1516651696.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:16.395Z,1516651696.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:16.420Z,1516651696.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:16.689Z,1516651696.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:16.810Z,1516651696.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:16.832Z,1516651696.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:17.091Z,1516651697.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:17.202Z,1516651697.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:17.225Z,1516651697.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:17.608Z,1516651697.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:17.623Z,1516651697.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:17.887Z,1516651697.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:17.981Z,1516651697.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:18.020Z,1516651698.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:18.391Z,1516651698.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:18.417Z,1516651698.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:18.683Z,1516651698.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:18.795Z,1516651698.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:18.830Z,1516651698.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:19.087Z,1516651699.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:19.199Z,1516651699.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:19.235Z,1516651699.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:19.607Z,1516651699.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:19.622Z,1516651699.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:19.883Z,1516651699.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:19.986Z,1516651699.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:20.021Z,1516651700.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:20.432Z,1516651700.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:20.465Z,1516651700.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:20.679Z,1516651700.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:20.807Z,1516651700.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:20.840Z,1516651700.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:21.083Z,1516651701.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:21.200Z,1516651701.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:21.231Z,1516651701.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:21.603Z,1516651701.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:21.635Z,1516651701.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:21.879Z,1516651701.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:21.990Z,1516651701.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:22.005Z,1516651702.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:22.391Z,1516651702.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:22.407Z,1516651702.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:22.677Z,1516651702.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:22.808Z,1516651702.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:22.840Z,1516651702.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:23.120Z,1516651703.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:23.208Z,1516651703.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:23.238Z,1516651703.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:23.603Z,1516651703.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:23.618Z,1516651703.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:23.915Z,1516651703.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:23.993Z,1516651703.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:24.008Z,1516651704.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:24.389Z,1516651704.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:24.411Z,1516651704.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:24.713Z,1516651704.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:24.808Z,1516651704.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:24.848Z,1516651704.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:25.119Z,1516651705.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:25.200Z,1516651705.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:25.219Z,1516651705.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:25.600Z,1516651705.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:25.615Z,1516651705.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:25.915Z,1516651705.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:25.987Z,1516651705.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:26.012Z,1516651706.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:26.403Z,1516651706.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:26.432Z,1516651706.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:26.711Z,1516651706.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:26.807Z,1516651706.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:26.828Z,1516651706.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:27.115Z,1516651707.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:27.205Z,1516651707.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:27.228Z,1516651707.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:27.607Z,1516651707.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:27.622Z,1516651707.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:27.911Z,1516651707.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:27.980Z,1516651707.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:28.011Z,1516651708.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:28.403Z,1516651708.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:28.429Z,1516651708.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:28.707Z,1516651708.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:28.804Z,1516651708.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:28.832Z,1516651708.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:29.112Z,1516651709.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:29.204Z,1516651709.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:29.219Z,1516651709.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:29.603Z,1516651709.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:29.632Z,1516651709.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:29.907Z,1516651709.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:29.985Z,1516651709.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:30.020Z,1516651710.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:30.405Z,1516651710.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:30.433Z,1516651710.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:30.703Z,1516651710.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:30.806Z,1516651710.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:30.821Z,1516651710.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:31.107Z,1516651711.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:31.206Z,1516651711.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:31.228Z,1516651711.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:31.606Z,1516651711.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:31.621Z,1516651711.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:31.903Z,1516651711.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:31.985Z,1516651711.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:32.012Z,1516651712.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:32.411Z,1516651712.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:32.437Z,1516651712.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:32.699Z,1516651712.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:32.806Z,1516651712.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:32.821Z,1516651712.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:33.103Z,1516651713.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:33.203Z,1516651713.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:33.224Z,1516651713.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:33.595Z,1516651713.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:33.621Z,1516651713.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:33.901Z,1516651713.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:33.985Z,1516651713.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:34.017Z,1516651714.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:34.438Z,1516651714.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:34.472Z,1516651714.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:34.695Z,1516651714.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:34.814Z,1516651714.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:34.829Z,1516651714.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:35.099Z,1516651715.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:35.195Z,1516651715.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:35.220Z,1516651715.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:35.599Z,1516651715.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:35.631Z,1516651715.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:35.895Z,1516651715.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:35.985Z,1516651715.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:36.024Z,1516651716.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:36.385Z,1516651716.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:36.420Z,1516651716.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:36.700Z,1516651716.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:36.816Z,1516651716.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:36.831Z,1516651716.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:37.147Z,1516651717.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:37.199Z,1516651717.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:37.233Z,1516651717.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:37.599Z,1516651717.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:37.624Z,1516651717.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:37.943Z,1516651717.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:37.990Z,1516651717.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:38.031Z,1516651718.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:38.381Z,1516651718.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:38.400Z,1516651718.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:38.740Z,1516651718.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:38.820Z,1516651718.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:38.835Z,1516651718.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:39.143Z,1516651719.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:39.199Z,1516651719.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:39.224Z,1516651719.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:39.598Z,1516651719.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:39.632Z,1516651719.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:39.939Z,1516651719.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:39.986Z,1516651719.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:40.001Z,1516651720.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:40.419Z,1516651720.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:40.455Z,1516651720.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:40.735Z,1516651720.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:41.139Z,1516651721.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:41.935Z,1516651721.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:42.731Z,1516651722.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:43.135Z,1516651723.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:43.624Z,1516651723.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:43.646Z,1516651723.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:43.764Z,1516651723.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:43.793Z,1516651723.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:43.931Z,1516651723.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:44.103Z,1516651724.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:44.142Z,1516651724.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:44.508Z,1516651724.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:44.516Z,1516651724.516 [PNI_TCM](ERROR): CRC does not match. Expected:0x15894 got:0x33307
2018-01-22T20:08:44.548Z,1516651724.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:44.729Z,1516651724.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:44.893Z,1516651724.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:44.938Z,1516651724.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:45.135Z,1516651725.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:45.295Z,1516651725.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:45.310Z,1516651725.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:45.692Z,1516651725.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:45.706Z,1516651725.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:45.933Z,1516651725.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:46.105Z,1516651726.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:46.124Z,1516651726.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:46.503Z,1516651726.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:46.549Z,1516651726.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:46.727Z,1516651726.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:46.911Z,1516651726.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:46.947Z,1516651726.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:47.131Z,1516651727.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:47.293Z,1516651727.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:47.318Z,1516651727.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:47.693Z,1516651727.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:47.720Z,1516651727.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:47.927Z,1516651727.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:48.097Z,1516651728.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:48.116Z,1516651728.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:48.498Z,1516651728.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:48.513Z,1516651728.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:48.724Z,1516651728.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:48.907Z,1516651728.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:48.943Z,1516651728.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:49.127Z,1516651729.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:49.305Z,1516651729.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:49.330Z,1516651729.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:49.710Z,1516651729.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:49.757Z,1516651729.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:49.924Z,1516651729.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:50.089Z,1516651730.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:50.120Z,1516651730.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:50.489Z,1516651730.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:50.523Z,1516651730.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:50.721Z,1516651730.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:50.889Z,1516651730.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:50.925Z,1516651730.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:51.171Z,1516651731.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:51.290Z,1516651731.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:51.320Z,1516651731.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:51.689Z,1516651731.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:51.704Z,1516651731.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:51.967Z,1516651731.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:52.104Z,1516651732.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:52.135Z,1516651732.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:52.503Z,1516651732.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:52.536Z,1516651732.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:52.763Z,1516651732.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:52.911Z,1516651732.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:52.936Z,1516651732.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:53.175Z,1516651733.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:53.292Z,1516651733.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:53.312Z,1516651733.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:53.692Z,1516651733.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:53.712Z,1516651733.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:53.971Z,1516651733.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:54.093Z,1516651734.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:54.132Z,1516651734.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:54.496Z,1516651734.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:54.516Z,1516651734.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:54.767Z,1516651734.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:54.911Z,1516651734.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:54.925Z,1516651734.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:55.171Z,1516651735.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:55.304Z,1516651735.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:55.339Z,1516651735.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:55.710Z,1516651735.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:55.732Z,1516651735.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:55.968Z,1516651735.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:56.089Z,1516651736.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:56.120Z,1516651736.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:56.488Z,1516651736.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:56.524Z,1516651736.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:56.763Z,1516651736.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:56.889Z,1516651736.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:56.923Z,1516651736.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:57.167Z,1516651737.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:57.289Z,1516651737.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:57.316Z,1516651737.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:57.689Z,1516651737.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:57.724Z,1516651737.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:57.967Z,1516651737.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:58.103Z,1516651738.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:58.126Z,1516651738.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:58.524Z,1516651738.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:58.545Z,1516651738.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:58.766Z,1516651738.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:58.917Z,1516651738.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:58.938Z,1516651738.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:59.171Z,1516651739.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:59.295Z,1516651739.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:59.328Z,1516651739.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:59.692Z,1516651739.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:08:59.740Z,1516651739.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:08:59.970Z,1516651739.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:00.093Z,1516651740.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:00.108Z,1516651740.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:00.489Z,1516651740.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:00.508Z,1516651740.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:00.763Z,1516651740.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:00.911Z,1516651740.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:00.934Z,1516651740.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:01.167Z,1516651741.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:01.311Z,1516651741.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:01.335Z,1516651741.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:01.707Z,1516651741.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:01.742Z,1516651741.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:01.964Z,1516651741.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:02.097Z,1516651742.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:02.112Z,1516651742.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:02.511Z,1516651742.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:02.534Z,1516651742.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:02.759Z,1516651742.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:02.901Z,1516651742.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:02.920Z,1516651742.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:03.163Z,1516651743.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:03.293Z,1516651743.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:03.313Z,1516651743.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:03.691Z,1516651743.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:03.714Z,1516651743.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:03.959Z,1516651743.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:04.108Z,1516651744.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:04.136Z,1516651744.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:04.510Z,1516651744.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:04.525Z,1516651744.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:04.756Z,1516651744.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:04.920Z,1516651744.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:04.935Z,1516651744.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:05.195Z,1516651745.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:05.289Z,1516651745.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:05.320Z,1516651745.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:05.689Z,1516651745.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:05.720Z,1516651745.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:05.991Z,1516651745.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:06.091Z,1516651746.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:06.105Z,1516651746.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:06.489Z,1516651746.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:06.504Z,1516651746.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:06.787Z,1516651746.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:06.899Z,1516651746.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:06.914Z,1516651746.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:07.191Z,1516651747.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:07.304Z,1516651747.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:07.339Z,1516651747.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:07.704Z,1516651747.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:07.727Z,1516651747.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:07.987Z,1516651747.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:08.093Z,1516651748.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:08.116Z,1516651748.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:08.496Z,1516651748.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:08.516Z,1516651748.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:08.783Z,1516651748.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:08.894Z,1516651748.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:08.922Z,1516651748.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:09.187Z,1516651749.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:09.294Z,1516651749.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:09.317Z,1516651749.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:09.700Z,1516651749.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:09.716Z,1516651749.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:09.983Z,1516651749.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:10.104Z,1516651750.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:10.120Z,1516651750.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:10.504Z,1516651750.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:10.519Z,1516651750.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:10.781Z,1516651750.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:10.903Z,1516651750.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:10.925Z,1516651750.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:11.187Z,1516651751.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:11.291Z,1516651751.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:11.319Z,1516651751.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:11.691Z,1516651751.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:11.723Z,1516651751.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:11.983Z,1516651751.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:12.098Z,1516651752.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:12.113Z,1516651752.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:12.497Z,1516651752.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:12.511Z,1516651752.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:12.779Z,1516651752.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:12.906Z,1516651752.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:12.921Z,1516651752.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:13.183Z,1516651753.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:13.307Z,1516651753.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:13.330Z,1516651753.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:13.708Z,1516651753.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:13.735Z,1516651753.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:13.979Z,1516651753.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:14.089Z,1516651754.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:14.124Z,1516651754.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:14.488Z,1516651754.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:14.520Z,1516651754.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:14.775Z,1516651754.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:14.904Z,1516651754.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:14.933Z,1516651754.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:15.179Z,1516651755.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:15.308Z,1516651755.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:15.335Z,1516651755.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:15.711Z,1516651755.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:15.731Z,1516651755.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:15.975Z,1516651755.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:16.089Z,1516651756.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:16.116Z,1516651756.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:16.520Z,1516651756.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:16.571Z,1516651756.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:16.771Z,1516651756.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:16.903Z,1516651756.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:16.940Z,1516651756.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:17.175Z,1516651757.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:17.303Z,1516651757.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:17.334Z,1516651757.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:17.703Z,1516651757.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:17.718Z,1516651757.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:17.971Z,1516651757.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:18.092Z,1516651758.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:18.112Z,1516651758.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:18.493Z,1516651758.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:18.516Z,1516651758.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:18.769Z,1516651758.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:18.904Z,1516651758.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:18.924Z,1516651758.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:19.207Z,1516651759.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:19.305Z,1516651759.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:19.320Z,1516651759.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:19.705Z,1516651759.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:19.724Z,1516651759.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:20.003Z,1516651760.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:20.092Z,1516651760.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:20.114Z,1516651760.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:20.493Z,1516651760.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:20.515Z,1516651760.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:20.801Z,1516651760.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:20.905Z,1516651760.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:20.920Z,1516651760.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:21.215Z,1516651761.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:21.307Z,1516651761.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:21.326Z,1516651761.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:21.707Z,1516651761.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:21.730Z,1516651761.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:22.011Z,1516651762.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:22.090Z,1516651762.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:22.123Z,1516651762.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:22.490Z,1516651762.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:22.521Z,1516651762.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:22.807Z,1516651762.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:22.913Z,1516651762.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:22.928Z,1516651762.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:23.211Z,1516651763.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:23.310Z,1516651763.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:23.325Z,1516651763.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:23.709Z,1516651763.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:23.724Z,1516651763.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.007Z,1516651764.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:24.089Z,1516651764.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:24.124Z,1516651764.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.502Z,1516651764.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:24.527Z,1516651764.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.803Z,1516651764.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:24.904Z,1516651764.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:24.930Z,1516651764.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.931Z,1516651764.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-01-22T20:09:24.931Z,1516651764.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:09:24.932Z,1516651764.932 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.933Z,1516651764.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-01-22T20:09:24.933Z,1516651764.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:09:24.939Z,1516651764.939 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:24.939Z,1516651764.939 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-01-22T20:09:24.939Z,1516651764.939 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:09:24.967Z,1516651764.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:09:24.967Z,1516651764.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:09:24.968Z,1516651764.968 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:09:25.207Z,1516651765.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:25.307Z,1516651765.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:25.356Z,1516651765.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:09:25.356Z,1516651765.356 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-01-22T20:09:25.356Z,1516651765.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:09:25.357Z,1516651765.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-01-22T20:09:25.357Z,1516651765.357 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:09:25.357Z,1516651765.357 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-01-22T20:09:25.707Z,1516651765.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:25.735Z,1516651765.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:09:25.735Z,1516651765.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:09:25.736Z,1516651765.736 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:09:25.736Z,1516651765.736 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:09:25.736Z,1516651765.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:09:25.737Z,1516651765.737 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:09:25.737Z,1516651765.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:09:25.737Z,1516651765.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:09:25.738Z,1516651765.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:09:26.003Z,1516651766.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:26.097Z,1516651766.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:26.122Z,1516651766.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:26.494Z,1516651766.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:26.532Z,1516651766.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:26.799Z,1516651766.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:26.899Z,1516651766.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:26.932Z,1516651766.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:27.205Z,1516651767.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:27.307Z,1516651767.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:27.328Z,1516651767.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:27.707Z,1516651767.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:27.730Z,1516651767.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:27.999Z,1516651767.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:28.090Z,1516651768.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:28.124Z,1516651768.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:28.501Z,1516651768.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:28.533Z,1516651768.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:28.795Z,1516651768.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:28.915Z,1516651768.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:28.937Z,1516651768.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:29.199Z,1516651769.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:29.302Z,1516651769.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:29.335Z,1516651769.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:29.703Z,1516651769.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:29.736Z,1516651769.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:29.996Z,1516651769.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:30.089Z,1516651770.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:30.104Z,1516651770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:30.537Z,1516651770.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:30.569Z,1516651770.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:30.791Z,1516651770.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:30.903Z,1516651770.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:30.918Z,1516651770.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:31.195Z,1516651771.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:31.307Z,1516651771.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:31.322Z,1516651771.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:31.703Z,1516651771.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:31.718Z,1516651771.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:31.991Z,1516651771.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:32.091Z,1516651772.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:32.114Z,1516651772.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:32.493Z,1516651772.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:32.515Z,1516651772.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:32.789Z,1516651772.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:32.905Z,1516651772.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:32.920Z,1516651772.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:33.237Z,1516651773.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:33.310Z,1516651773.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:33.325Z,1516651773.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:33.706Z,1516651773.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:33.729Z,1516651773.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:34.031Z,1516651774.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:34.090Z,1516651774.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:34.114Z,1516651774.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:34.489Z,1516651774.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:34.519Z,1516651774.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:34.829Z,1516651774.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:34.909Z,1516651774.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:34.928Z,1516651774.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:35.235Z,1516651775.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:35.308Z,1516651775.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:35.330Z,1516651775.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:35.707Z,1516651775.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:35.727Z,1516651775.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:36.031Z,1516651776.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:36.089Z,1516651776.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:36.124Z,1516651776.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:36.510Z,1516651776.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:36.534Z,1516651776.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:36.827Z,1516651776.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:36.907Z,1516651776.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:36.936Z,1516651776.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:37.231Z,1516651777.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:37.311Z,1516651777.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:37.326Z,1516651777.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:37.707Z,1516651777.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:37.736Z,1516651777.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:38.027Z,1516651778.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:38.090Z,1516651778.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:38.124Z,1516651778.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:38.511Z,1516651778.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:38.539Z,1516651778.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:38.823Z,1516651778.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:38.906Z,1516651778.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:38.921Z,1516651778.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:39.227Z,1516651779.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:39.307Z,1516651779.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:39.328Z,1516651779.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:39.707Z,1516651779.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:39.730Z,1516651779.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:39.733Z,1516651779.733 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:04:39.4Z
2018-01-22T20:09:39.733Z,1516651779.733 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T20:09:39.734Z,1516651779.734 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T20:09:40.023Z,1516651780.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:40.090Z,1516651780.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:40.113Z,1516651780.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:40.643Z,1516651780.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:40.676Z,1516651780.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:40.820Z,1516651780.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:41.223Z,1516651781.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:42.019Z,1516651782.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:42.815Z,1516651782.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:43.219Z,1516651783.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:43.774Z,1516651783.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:43.789Z,1516651783.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:43.883Z,1516651783.883 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0044.lzma
2018-01-22T20:09:43.925Z,1516651783.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:43.941Z,1516651783.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:44.043Z,1516651784.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:44.274Z,1516651784.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:44.289Z,1516651784.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:44.637Z,1516651784.637 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0044.lzma.bak
2018-01-22T20:09:44.637Z,1516651784.637 [DataOverHttps](INFO): SBD MOMSN=7751418
2018-01-22T20:09:44.658Z,1516651784.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:44.696Z,1516651784.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:44.839Z,1516651784.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:45.243Z,1516651785.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:45.274Z,1516651785.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:45.289Z,1516651785.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:45.456Z,1516651785.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:45.487Z,1516651785.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:46.039Z,1516651786.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:46.837Z,1516651786.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:47.273Z,1516651787.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:48.068Z,1516651788.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:48.740Z,1516651788.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:48.760Z,1516651788.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:48.863Z,1516651788.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:48.899Z,1516651788.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:48.949Z,1516651788.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:49.264Z,1516651789.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:49.291Z,1516651789.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:49.299Z,1516651789.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:49.658Z,1516651789.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:49.672Z,1516651789.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:50.046Z,1516651790.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:50.075Z,1516651790.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:50.095Z,1516651790.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:50.483Z,1516651790.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:50.541Z,1516651790.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:50.891Z,1516651790.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:51.295Z,1516651791.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:52.091Z,1516651792.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:52.887Z,1516651792.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:53.291Z,1516651793.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:53.747Z,1516651793.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:53.763Z,1516651793.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:53.850Z,1516651793.850 [DataOverHttps](INFO): Sending 129 bytes from file Logs/20180122T180533/Express0045.lzma
2018-01-22T20:09:53.893Z,1516651793.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:53.908Z,1516651793.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:54.087Z,1516651794.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:54.250Z,1516651794.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:54.268Z,1516651794.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:54.609Z,1516651794.609 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0045.lzma.bak
2018-01-22T20:09:54.609Z,1516651794.609 [DataOverHttps](INFO): SBD MOMSN=7751420
2018-01-22T20:09:54.661Z,1516651794.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:54.676Z,1516651794.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:54.883Z,1516651794.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:55.259Z,1516651795.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:55.274Z,1516651795.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:55.277Z,1516651795.277 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T20:09:55.277Z,1516651795.277 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T20:09:55.277Z,1516651795.277 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T20:09:55.287Z,1516651795.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:55.429Z,1516651795.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:55.460Z,1516651795.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:56.084Z,1516651796.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:56.879Z,1516651796.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:57.283Z,1516651797.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:58.079Z,1516651798.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:58.796Z,1516651798.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:58.816Z,1516651798.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:58.875Z,1516651798.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:58.928Z,1516651798.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:58.968Z,1516651798.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:59.275Z,1516651799.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:59.279Z,1516651799.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:59.307Z,1516651799.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:09:59.664Z,1516651799.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:09:59.679Z,1516651799.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:00.061Z,1516651800.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:00.076Z,1516651800.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:00.077Z,1516651800.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:00.462Z,1516651800.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:00.481Z,1516651800.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:00.875Z,1516651800.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:00.934Z,1516651800.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:01.293Z,1516651801.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:01.331Z,1516651801.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:01.696Z,1516651801.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:02.092Z,1516651802.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:02.127Z,1516651802.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:02.488Z,1516651802.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:02.923Z,1516651802.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:02.931Z,1516651802.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:03.292Z,1516651803.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:03.327Z,1516651803.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:03.684Z,1516651803.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:04.093Z,1516651804.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:04.123Z,1516651804.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:04.513Z,1516651804.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:04.557Z,1516651804.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:04.871Z,1516651804.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:04.886Z,1516651804.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:04.919Z,1516651804.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:05.264Z,1516651805.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:05.284Z,1516651805.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:05.323Z,1516651805.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:05.661Z,1516651805.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:05.680Z,1516651805.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:06.061Z,1516651806.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:06.095Z,1516651806.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:06.120Z,1516651806.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:06.465Z,1516651806.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:06.548Z,1516651806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:06.863Z,1516651806.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:06.883Z,1516651806.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:06.915Z,1516651806.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:07.274Z,1516651807.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:07.304Z,1516651807.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:07.319Z,1516651807.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:07.677Z,1516651807.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:07.692Z,1516651807.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:08.079Z,1516651808.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:08.093Z,1516651808.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:08.115Z,1516651808.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:08.457Z,1516651808.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:08.543Z,1516651808.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:08.857Z,1516651808.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:08.887Z,1516651808.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:08.911Z,1516651808.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:09.258Z,1516651809.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:09.296Z,1516651809.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:09.315Z,1516651809.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:09.657Z,1516651809.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:09.688Z,1516651809.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:10.071Z,1516651810.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:10.103Z,1516651810.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:10.111Z,1516651810.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:10.471Z,1516651810.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:10.563Z,1516651810.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:10.871Z,1516651810.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:10.886Z,1516651810.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:10.907Z,1516651810.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:11.261Z,1516651811.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:11.275Z,1516651811.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:11.311Z,1516651811.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:11.664Z,1516651811.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:11.684Z,1516651811.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:12.061Z,1516651812.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:12.075Z,1516651812.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:12.107Z,1516651812.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:12.465Z,1516651812.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:12.480Z,1516651812.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:12.870Z,1516651812.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:12.903Z,1516651812.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:12.920Z,1516651812.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:13.271Z,1516651813.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:13.286Z,1516651813.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:13.307Z,1516651813.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:13.671Z,1516651813.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:13.686Z,1516651813.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:14.071Z,1516651814.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:14.086Z,1516651814.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:14.103Z,1516651814.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:14.460Z,1516651814.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:14.488Z,1516651814.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:14.899Z,1516651814.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:14.903Z,1516651814.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:14.931Z,1516651814.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:15.265Z,1516651815.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:15.296Z,1516651815.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:15.347Z,1516651815.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:15.663Z,1516651815.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:15.682Z,1516651815.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:16.075Z,1516651816.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:16.094Z,1516651816.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:16.143Z,1516651816.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:16.479Z,1516651816.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:16.493Z,1516651816.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:16.921Z,1516651816.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:16.939Z,1516651816.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:16.951Z,1516651816.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:17.257Z,1516651817.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:17.292Z,1516651817.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:17.343Z,1516651817.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:17.688Z,1516651817.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:18.090Z,1516651818.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:18.139Z,1516651818.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:18.488Z,1516651818.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:18.884Z,1516651818.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:18.935Z,1516651818.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:19.302Z,1516651819.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:19.339Z,1516651819.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:19.703Z,1516651819.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:20.108Z,1516651820.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:20.135Z,1516651820.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:20.480Z,1516651820.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:20.878Z,1516651820.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:20.931Z,1516651820.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:21.267Z,1516651821.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:21.298Z,1516651821.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:21.335Z,1516651821.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:21.664Z,1516651821.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:21.683Z,1516651821.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:22.072Z,1516651822.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:22.096Z,1516651822.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:22.131Z,1516651822.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:22.474Z,1516651822.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:22.492Z,1516651822.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:22.872Z,1516651822.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:22.906Z,1516651822.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:22.935Z,1516651822.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:23.257Z,1516651823.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:23.272Z,1516651823.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:23.339Z,1516651823.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:23.657Z,1516651823.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:23.673Z,1516651823.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:24.065Z,1516651824.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:24.080Z,1516651824.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:24.135Z,1516651824.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:24.470Z,1516651824.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:24.485Z,1516651824.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:24.859Z,1516651824.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:24.882Z,1516651824.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:24.931Z,1516651824.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:25.272Z,1516651825.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:25.296Z,1516651825.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:25.335Z,1516651825.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:25.674Z,1516651825.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:25.696Z,1516651825.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:26.082Z,1516651826.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:26.097Z,1516651826.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:26.131Z,1516651826.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:26.457Z,1516651826.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:26.488Z,1516651826.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:26.856Z,1516651826.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:26.887Z,1516651826.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:26.927Z,1516651826.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:27.258Z,1516651827.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:27.296Z,1516651827.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:27.331Z,1516651827.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:27.657Z,1516651827.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:27.688Z,1516651827.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:28.083Z,1516651828.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:28.098Z,1516651828.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:28.128Z,1516651828.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:28.483Z,1516651828.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:28.502Z,1516651828.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:28.910Z,1516651828.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:28.924Z,1516651828.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:28.951Z,1516651828.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:29.273Z,1516651829.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:29.300Z,1516651829.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:29.363Z,1516651829.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:29.661Z,1516651829.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:29.676Z,1516651829.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:30.061Z,1516651830.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:30.111Z,1516651830.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:30.159Z,1516651830.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:30.465Z,1516651830.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:30.480Z,1516651830.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:30.877Z,1516651830.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:30.955Z,1516651830.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:30.963Z,1516651830.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:31.272Z,1516651831.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:31.293Z,1516651831.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:31.359Z,1516651831.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:31.676Z,1516651831.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:31.705Z,1516651831.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:32.077Z,1516651832.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:32.101Z,1516651832.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:32.156Z,1516651832.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:32.457Z,1516651832.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:32.492Z,1516651832.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:32.863Z,1516651832.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:32.878Z,1516651832.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:32.952Z,1516651832.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:33.265Z,1516651833.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:33.280Z,1516651833.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:33.355Z,1516651833.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:33.660Z,1516651833.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:33.685Z,1516651833.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:34.067Z,1516651834.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:34.090Z,1516651834.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:34.151Z,1516651834.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:34.479Z,1516651834.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:34.511Z,1516651834.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:34.871Z,1516651834.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:34.886Z,1516651834.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:34.947Z,1516651834.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:35.260Z,1516651835.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:35.279Z,1516651835.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:35.351Z,1516651835.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:35.661Z,1516651835.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:35.684Z,1516651835.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:36.061Z,1516651836.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:36.081Z,1516651836.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:36.147Z,1516651836.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:36.463Z,1516651836.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:36.480Z,1516651836.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:36.859Z,1516651836.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:36.893Z,1516651836.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:36.943Z,1516651836.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:37.284Z,1516651837.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:37.304Z,1516651837.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:37.347Z,1516651837.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:37.678Z,1516651837.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:37.696Z,1516651837.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:38.075Z,1516651838.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:38.097Z,1516651838.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:38.143Z,1516651838.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:38.457Z,1516651838.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:38.484Z,1516651838.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:38.856Z,1516651838.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:38.898Z,1516651838.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:38.939Z,1516651838.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:39.258Z,1516651839.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:39.272Z,1516651839.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:39.343Z,1516651839.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:39.657Z,1516651839.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:39.672Z,1516651839.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:40.071Z,1516651840.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:40.094Z,1516651840.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:40.139Z,1516651840.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:40.478Z,1516651840.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:40.501Z,1516651840.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:40.892Z,1516651840.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:40.907Z,1516651840.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:40.935Z,1516651840.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:41.268Z,1516651841.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:41.296Z,1516651841.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:41.339Z,1516651841.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:41.668Z,1516651841.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:41.698Z,1516651841.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:42.060Z,1516651842.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:42.075Z,1516651842.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:42.135Z,1516651842.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:42.461Z,1516651842.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:42.476Z,1516651842.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:42.860Z,1516651842.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:42.937Z,1516651842.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:42.940Z,1516651842.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:43.271Z,1516651843.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:43.286Z,1516651843.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:43.379Z,1516651843.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:43.671Z,1516651843.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:43.686Z,1516651843.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:44.071Z,1516651844.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:44.085Z,1516651844.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:44.175Z,1516651844.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:44.464Z,1516651844.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:44.484Z,1516651844.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:44.860Z,1516651844.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:44.940Z,1516651844.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:44.971Z,1516651844.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:45.265Z,1516651845.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:45.280Z,1516651845.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:45.383Z,1516651845.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:45.661Z,1516651845.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:45.690Z,1516651845.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:46.072Z,1516651846.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:46.087Z,1516651846.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:46.179Z,1516651846.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:46.473Z,1516651846.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:46.492Z,1516651846.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:46.885Z,1516651846.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:46.900Z,1516651846.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:46.975Z,1516651846.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:47.273Z,1516651847.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:47.294Z,1516651847.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:47.379Z,1516651847.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:47.657Z,1516651847.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:47.692Z,1516651847.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:48.058Z,1516651848.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:48.099Z,1516651848.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:48.177Z,1516651848.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:48.457Z,1516651848.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:48.492Z,1516651848.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:48.865Z,1516651848.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:48.896Z,1516651848.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:48.971Z,1516651848.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:49.279Z,1516651849.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:49.302Z,1516651849.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:49.375Z,1516651849.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:49.679Z,1516651849.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:49.702Z,1516651849.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:50.075Z,1516651850.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:50.099Z,1516651850.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:50.171Z,1516651850.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:50.464Z,1516651850.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:50.504Z,1516651850.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:50.868Z,1516651850.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:50.908Z,1516651850.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:50.967Z,1516651850.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:51.269Z,1516651851.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:51.284Z,1516651851.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:51.371Z,1516651851.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:51.660Z,1516651851.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:51.680Z,1516651851.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:52.075Z,1516651852.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:52.090Z,1516651852.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:52.167Z,1516651852.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:52.471Z,1516651852.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:52.485Z,1516651852.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:52.883Z,1516651852.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:52.914Z,1516651852.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:52.963Z,1516651852.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:53.260Z,1516651853.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:53.279Z,1516651853.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:53.367Z,1516651853.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:53.659Z,1516651853.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:53.692Z,1516651853.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:54.063Z,1516651854.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:54.083Z,1516651854.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:54.163Z,1516651854.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:54.465Z,1516651854.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:54.479Z,1516651854.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:54.872Z,1516651854.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:54.892Z,1516651854.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:54.959Z,1516651854.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:55.272Z,1516651855.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:55.300Z,1516651855.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:55.363Z,1516651855.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:55.678Z,1516651855.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:55.693Z,1516651855.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:56.159Z,1516651856.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:56.959Z,1516651856.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:57.375Z,1516651857.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:58.171Z,1516651858.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:58.967Z,1516651858.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:58.996Z,1516651858.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:59.041Z,1516651859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:59.140Z,1516651859.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:59.157Z,1516651859.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:59.383Z,1516651859.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:59.498Z,1516651859.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:59.535Z,1516651859.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:10:59.900Z,1516651859.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:10:59.948Z,1516651859.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:00.179Z,1516651860.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:00.301Z,1516651860.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:00.336Z,1516651860.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:00.696Z,1516651860.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:00.717Z,1516651860.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:00.975Z,1516651860.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:01.115Z,1516651861.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:01.151Z,1516651861.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:01.379Z,1516651861.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:01.515Z,1516651861.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:01.556Z,1516651861.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:01.912Z,1516651861.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:01.946Z,1516651861.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:02.175Z,1516651862.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:02.300Z,1516651862.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:02.326Z,1516651862.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:02.702Z,1516651862.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:02.724Z,1516651862.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:02.971Z,1516651862.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:03.107Z,1516651863.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:03.128Z,1516651863.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:03.375Z,1516651863.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:03.502Z,1516651863.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:03.532Z,1516651863.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:03.903Z,1516651863.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:03.926Z,1516651863.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:04.171Z,1516651864.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:04.315Z,1516651864.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:04.338Z,1516651864.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:04.718Z,1516651864.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:04.747Z,1516651864.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:04.967Z,1516651864.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:05.118Z,1516651865.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:05.144Z,1516651865.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:05.371Z,1516651865.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:05.497Z,1516651865.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:05.533Z,1516651865.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:05.897Z,1516651865.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:05.929Z,1516651865.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:06.167Z,1516651866.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:06.298Z,1516651866.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:06.332Z,1516651866.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:06.705Z,1516651866.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:06.733Z,1516651866.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:06.963Z,1516651866.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:07.131Z,1516651867.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:07.146Z,1516651867.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:07.367Z,1516651867.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:07.516Z,1516651867.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:07.566Z,1516651867.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:07.916Z,1516651867.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:07.937Z,1516651867.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:08.163Z,1516651868.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:08.297Z,1516651868.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:08.324Z,1516651868.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:08.705Z,1516651868.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:08.747Z,1516651868.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:08.961Z,1516651868.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:09.097Z,1516651869.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:09.135Z,1516651869.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:09.367Z,1516651869.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:09.498Z,1516651869.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:09.521Z,1516651869.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:09.897Z,1516651869.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:09.912Z,1516651869.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:10.163Z,1516651870.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:10.311Z,1516651870.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:10.352Z,1516651870.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:10.715Z,1516651870.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:10.740Z,1516651870.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:10.961Z,1516651870.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:11.119Z,1516651871.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:11.152Z,1516651871.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:11.391Z,1516651871.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:11.502Z,1516651871.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:11.517Z,1516651871.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:11.902Z,1516651871.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:11.939Z,1516651871.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:12.189Z,1516651872.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:12.305Z,1516651872.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:12.319Z,1516651872.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:12.699Z,1516651872.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:12.728Z,1516651872.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:12.984Z,1516651872.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:13.111Z,1516651873.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:13.127Z,1516651873.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:13.389Z,1516651873.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:13.511Z,1516651873.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:13.527Z,1516651873.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:13.911Z,1516651873.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:13.927Z,1516651873.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:14.183Z,1516651874.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:14.299Z,1516651874.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:14.328Z,1516651874.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:14.704Z,1516651874.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:14.724Z,1516651874.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:14.979Z,1516651874.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:15.111Z,1516651875.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:15.126Z,1516651875.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:15.383Z,1516651875.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:15.502Z,1516651875.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:15.529Z,1516651875.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:15.901Z,1516651875.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:15.922Z,1516651875.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:16.179Z,1516651876.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:16.319Z,1516651876.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:16.335Z,1516651876.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:16.717Z,1516651876.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:16.733Z,1516651876.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:16.975Z,1516651876.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:17.115Z,1516651877.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:17.138Z,1516651877.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:17.379Z,1516651877.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:17.497Z,1516651877.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:17.528Z,1516651877.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:17.897Z,1516651877.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:17.934Z,1516651877.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:18.175Z,1516651878.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:18.298Z,1516651878.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:18.324Z,1516651878.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:18.696Z,1516651878.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:18.721Z,1516651878.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:18.971Z,1516651878.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:19.119Z,1516651879.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:19.135Z,1516651879.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:19.375Z,1516651879.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:19.518Z,1516651879.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:19.534Z,1516651879.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:19.918Z,1516651879.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:19.934Z,1516651879.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:20.171Z,1516651880.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:20.297Z,1516651880.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:20.325Z,1516651880.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:20.698Z,1516651880.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:20.725Z,1516651880.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:20.967Z,1516651880.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:21.097Z,1516651881.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:21.133Z,1516651881.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:21.371Z,1516651881.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:21.498Z,1516651881.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:21.533Z,1516651881.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:21.897Z,1516651881.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:21.926Z,1516651881.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:22.167Z,1516651882.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:22.315Z,1516651882.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:22.339Z,1516651882.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:22.734Z,1516651882.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:22.788Z,1516651882.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:22.963Z,1516651882.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:23.115Z,1516651883.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:23.144Z,1516651883.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:23.367Z,1516651883.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:23.501Z,1516651883.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:23.520Z,1516651883.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:23.901Z,1516651883.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:23.916Z,1516651883.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:24.302Z,1516651884.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:24.326Z,1516651884.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:24.700Z,1516651884.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:24.729Z,1516651884.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:25.119Z,1516651885.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:25.135Z,1516651885.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:25.513Z,1516651885.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:25.529Z,1516651885.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:25.913Z,1516651885.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:25.929Z,1516651885.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:26.299Z,1516651886.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:26.336Z,1516651886.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:26.701Z,1516651886.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:26.722Z,1516651886.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:27.112Z,1516651887.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:27.129Z,1516651887.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:27.503Z,1516651887.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:27.536Z,1516651887.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:27.897Z,1516651887.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:27.922Z,1516651887.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:28.316Z,1516651888.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:28.343Z,1516651888.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:28.728Z,1516651888.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:28.743Z,1516651888.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:29.116Z,1516651889.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:29.148Z,1516651889.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:29.497Z,1516651889.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:29.532Z,1516651889.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:29.897Z,1516651889.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:29.934Z,1516651889.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:30.199Z,1516651890.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:30.297Z,1516651890.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:30.332Z,1516651890.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:30.708Z,1516651890.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:30.740Z,1516651890.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:30.995Z,1516651890.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:31.115Z,1516651891.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:31.147Z,1516651891.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:31.399Z,1516651891.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:31.515Z,1516651891.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:31.546Z,1516651891.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:31.916Z,1516651891.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:31.946Z,1516651891.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:32.195Z,1516651892.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:32.306Z,1516651892.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:32.320Z,1516651892.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:32.703Z,1516651892.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:32.724Z,1516651892.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:32.991Z,1516651892.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:33.112Z,1516651893.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:33.128Z,1516651893.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:33.395Z,1516651893.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:33.511Z,1516651893.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:33.528Z,1516651893.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:33.911Z,1516651893.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:33.928Z,1516651893.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:34.191Z,1516651894.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:34.303Z,1516651894.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:34.318Z,1516651894.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:34.709Z,1516651894.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:34.730Z,1516651894.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:34.989Z,1516651894.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:35.112Z,1516651895.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:35.127Z,1516651895.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:35.395Z,1516651895.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:35.511Z,1516651895.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:35.527Z,1516651895.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:35.911Z,1516651895.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:35.927Z,1516651895.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:36.304Z,1516651896.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:36.318Z,1516651896.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:36.736Z,1516651896.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:36.772Z,1516651896.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:37.113Z,1516651897.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:37.129Z,1516651897.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:37.511Z,1516651897.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:37.530Z,1516651897.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:37.912Z,1516651897.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:37.929Z,1516651897.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:38.303Z,1516651898.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:38.331Z,1516651898.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:38.701Z,1516651898.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:38.731Z,1516651898.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:39.113Z,1516651899.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:39.129Z,1516651899.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:39.514Z,1516651899.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:39.529Z,1516651899.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:39.912Z,1516651899.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:39.929Z,1516651899.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:40.303Z,1516651900.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:40.318Z,1516651900.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:40.699Z,1516651900.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:40.722Z,1516651900.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:41.114Z,1516651901.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:41.130Z,1516651901.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:41.515Z,1516651901.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:41.538Z,1516651901.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:41.918Z,1516651901.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:41.940Z,1516651901.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:42.228Z,1516651902.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:42.306Z,1516651902.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:42.336Z,1516651902.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:42.731Z,1516651902.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:42.782Z,1516651902.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:43.024Z,1516651903.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:43.123Z,1516651903.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:43.186Z,1516651903.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:43.427Z,1516651903.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:43.513Z,1516651903.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:43.547Z,1516651903.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:43.945Z,1516651903.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:43.966Z,1516651903.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:44.224Z,1516651904.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:44.306Z,1516651904.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:44.321Z,1516651904.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:44.714Z,1516651904.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:44.730Z,1516651904.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:45.019Z,1516651905.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:45.104Z,1516651905.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:45.125Z,1516651905.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:45.423Z,1516651905.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:45.496Z,1516651905.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:45.524Z,1516651905.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:45.897Z,1516651905.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:45.944Z,1516651905.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:46.219Z,1516651906.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:46.316Z,1516651906.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:46.336Z,1516651906.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:46.729Z,1516651906.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:46.747Z,1516651906.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:47.016Z,1516651907.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:47.120Z,1516651907.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:47.148Z,1516651907.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:47.419Z,1516651907.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:47.498Z,1516651907.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:47.521Z,1516651907.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:47.899Z,1516651907.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:47.922Z,1516651907.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:48.216Z,1516651908.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:48.307Z,1516651908.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:48.350Z,1516651908.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:48.717Z,1516651908.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:48.806Z,1516651908.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:49.011Z,1516651909.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:49.125Z,1516651909.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:49.174Z,1516651909.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:49.416Z,1516651909.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:49.513Z,1516651909.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:49.568Z,1516651909.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:49.909Z,1516651909.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:49.944Z,1516651909.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:50.212Z,1516651910.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:50.308Z,1516651910.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:50.329Z,1516651910.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:50.743Z,1516651910.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:50.794Z,1516651910.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:51.007Z,1516651911.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:51.138Z,1516651911.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:51.157Z,1516651911.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:51.411Z,1516651911.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:51.517Z,1516651911.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:51.555Z,1516651911.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:51.921Z,1516651911.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:51.953Z,1516651911.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:52.208Z,1516651912.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:52.306Z,1516651912.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:52.325Z,1516651912.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:52.707Z,1516651912.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:52.730Z,1516651912.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:53.005Z,1516651913.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:53.126Z,1516651913.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:53.185Z,1516651913.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:53.487Z,1516651913.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:53.528Z,1516651913.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:53.542Z,1516651913.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:53.923Z,1516651913.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:53.938Z,1516651913.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:54.284Z,1516651914.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:54.299Z,1516651914.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:54.336Z,1516651914.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:54.697Z,1516651914.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:54.727Z,1516651914.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:55.079Z,1516651915.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:55.129Z,1516651915.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:55.144Z,1516651915.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:55.516Z,1516651915.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:55.538Z,1516651915.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:55.875Z,1516651915.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:55.915Z,1516651915.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:55.979Z,1516651915.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:56.673Z,1516651916.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:57.467Z,1516651917.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:58.265Z,1516651918.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:59.059Z,1516651919.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:59.277Z,1516651919.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:59.296Z,1516651919.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:59.390Z,1516651919.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:59.429Z,1516651919.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:59.763Z,1516651919.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:11:59.786Z,1516651919.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:11:59.855Z,1516651919.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:00.160Z,1516651920.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:00.184Z,1516651920.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:00.559Z,1516651920.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:00.582Z,1516651920.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:00.652Z,1516651920.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:00.949Z,1516651920.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:00.963Z,1516651920.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:01.367Z,1516651921.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:01.409Z,1516651921.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:01.447Z,1516651921.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:01.747Z,1516651921.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:01.768Z,1516651921.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:01.851Z,1516651921.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.151Z,1516651922.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.166Z,1516651922.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:02.255Z,1516651922.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.551Z,1516651922.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.565Z,1516651922.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:02.666Z,1516651922.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.948Z,1516651922.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:02.962Z,1516651922.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:03.071Z,1516651923.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:03.346Z,1516651923.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:03.364Z,1516651923.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:03.477Z,1516651923.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:03.741Z,1516651923.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:03.750Z,1516651923.750 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:12:03.750Z,1516651923.750 [BPC1] Communications Fault, FailCount= 2
2018-01-22T20:12:03.750Z,1516651923.750 [BPC1](ERROR): Communications Fault
2018-01-22T20:12:03.757Z,1516651923.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:03.782Z,1516651923.782 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:12:04.152Z,1516651924.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:04.176Z,1516651924.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:04.271Z,1516651924.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:04.552Z,1516651924.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:04.572Z,1516651924.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:04.960Z,1516651924.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:04.974Z,1516651924.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:05.007Z,1516651925.007 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:12:05.008Z,1516651925.008 [BPC1] No Fault, FailCount= 2
2018-01-22T20:12:05.067Z,1516651925.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:05.340Z,1516651925.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:05.420Z,1516651925.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:05.471Z,1516651925.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:05.741Z,1516651925.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:05.761Z,1516651925.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:06.155Z,1516651926.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:06.183Z,1516651926.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:06.267Z,1516651926.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:06.554Z,1516651926.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:06.569Z,1516651926.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:06.958Z,1516651926.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:06.972Z,1516651926.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:07.064Z,1516651927.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:07.346Z,1516651927.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:07.377Z,1516651927.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:07.475Z,1516651927.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:07.737Z,1516651927.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:07.771Z,1516651927.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:08.166Z,1516651928.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:08.181Z,1516651928.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:08.271Z,1516651928.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:08.555Z,1516651928.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:08.577Z,1516651928.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:08.958Z,1516651928.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:08.973Z,1516651928.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:09.067Z,1516651929.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:09.357Z,1516651929.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:09.379Z,1516651929.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:09.491Z,1516651929.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:09.740Z,1516651929.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:09.780Z,1516651929.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:10.152Z,1516651930.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:10.181Z,1516651930.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:10.287Z,1516651930.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:10.555Z,1516651930.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:10.578Z,1516651930.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:10.982Z,1516651930.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:11.083Z,1516651931.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:11.364Z,1516651931.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:11.487Z,1516651931.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:11.754Z,1516651931.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:12.151Z,1516651932.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:12.166Z,1516651932.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:12.283Z,1516651932.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:12.551Z,1516651932.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:12.566Z,1516651932.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:12.947Z,1516651932.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:12.962Z,1516651932.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:13.079Z,1516651933.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:13.340Z,1516651933.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:13.363Z,1516651933.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:13.483Z,1516651933.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:13.740Z,1516651933.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:13.755Z,1516651933.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:14.147Z,1516651934.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:14.168Z,1516651934.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:14.281Z,1516651934.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:14.552Z,1516651934.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:14.566Z,1516651934.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:14.948Z,1516651934.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:14.963Z,1516651934.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:15.075Z,1516651935.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:15.349Z,1516651935.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:15.368Z,1516651935.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:15.479Z,1516651935.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:15.776Z,1516651935.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:16.166Z,1516651936.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:16.275Z,1516651936.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:16.566Z,1516651936.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:17.000Z,1516651937.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:17.071Z,1516651937.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:17.363Z,1516651937.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:17.475Z,1516651937.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:17.757Z,1516651937.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:18.166Z,1516651938.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:18.271Z,1516651938.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:18.571Z,1516651938.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:18.973Z,1516651938.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:19.067Z,1516651939.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:19.364Z,1516651939.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:19.471Z,1516651939.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:19.756Z,1516651939.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:20.176Z,1516651940.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:20.267Z,1516651940.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:20.591Z,1516651940.591 [BPC1](INFO): Initialized
2018-01-22T20:12:20.608Z,1516651940.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:20.980Z,1516651940.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:21.065Z,1516651941.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:21.367Z,1516651941.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:21.503Z,1516651941.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:21.768Z,1516651941.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:22.166Z,1516651942.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:22.299Z,1516651942.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:22.570Z,1516651942.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:22.966Z,1516651942.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:23.095Z,1516651943.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:23.371Z,1516651943.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:23.499Z,1516651943.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:23.763Z,1516651943.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:24.176Z,1516651944.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:24.295Z,1516651944.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:24.575Z,1516651944.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:24.974Z,1516651944.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:25.091Z,1516651945.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:25.365Z,1516651945.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:25.495Z,1516651945.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:25.761Z,1516651945.761 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:25.762Z,1516651945.762 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-01-22T20:12:25.762Z,1516651945.762 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:12:25.764Z,1516651945.764 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:25.764Z,1516651945.764 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-01-22T20:12:25.764Z,1516651945.764 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:12:25.766Z,1516651945.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:25.766Z,1516651945.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-01-22T20:12:25.766Z,1516651945.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:12:25.778Z,1516651945.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:12:25.778Z,1516651945.778 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:12:25.778Z,1516651945.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:12:26.206Z,1516651946.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:12:26.206Z,1516651946.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-01-22T20:12:26.211Z,1516651946.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:12:26.211Z,1516651946.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-01-22T20:12:26.211Z,1516651946.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:12:26.212Z,1516651946.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-01-22T20:12:26.291Z,1516651946.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:26.574Z,1516651946.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:12:26.574Z,1516651946.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:12:26.575Z,1516651946.575 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:12:26.575Z,1516651946.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:12:26.576Z,1516651946.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:12:26.576Z,1516651946.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:12:26.576Z,1516651946.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:12:26.577Z,1516651946.577 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:12:26.577Z,1516651946.577 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:12:26.976Z,1516651946.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:27.087Z,1516651947.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:27.369Z,1516651947.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:27.491Z,1516651947.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:27.776Z,1516651947.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:28.160Z,1516651948.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:28.287Z,1516651948.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:28.574Z,1516651948.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:28.973Z,1516651948.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:29.083Z,1516651949.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:29.381Z,1516651949.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:29.487Z,1516651949.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:29.760Z,1516651949.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:30.167Z,1516651950.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:30.283Z,1516651950.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:30.561Z,1516651950.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:30.960Z,1516651950.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:31.079Z,1516651951.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:31.380Z,1516651951.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:31.483Z,1516651951.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:31.772Z,1516651951.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:32.166Z,1516651952.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:32.279Z,1516651952.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:32.572Z,1516651952.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:32.960Z,1516651952.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:33.075Z,1516651953.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:33.376Z,1516651953.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:33.479Z,1516651953.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:12:33.756Z,1516651953.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:34.168Z,1516651954.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:34.572Z,1516651954.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:34.976Z,1516651954.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:35.359Z,1516651955.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:35.763Z,1516651955.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:36.164Z,1516651956.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:36.573Z,1516651956.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:36.976Z,1516651956.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:37.376Z,1516651957.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:37.759Z,1516651957.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:38.168Z,1516651958.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:38.558Z,1516651958.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:38.964Z,1516651958.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:39.379Z,1516651959.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:39.772Z,1516651959.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:40.172Z,1516651960.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:40.568Z,1516651960.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:40.958Z,1516651960.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:41.368Z,1516651961.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:41.760Z,1516651961.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:42.164Z,1516651962.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:42.571Z,1516651962.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:42.980Z,1516651962.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:43.368Z,1516651963.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:43.764Z,1516651963.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:44.160Z,1516651964.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:44.559Z,1516651964.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:44.959Z,1516651964.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:45.376Z,1516651965.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:45.773Z,1516651965.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:46.172Z,1516651966.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:46.559Z,1516651966.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:46.967Z,1516651966.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:47.360Z,1516651967.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:47.760Z,1516651967.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:48.166Z,1516651968.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:48.572Z,1516651968.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:48.972Z,1516651968.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:49.376Z,1516651969.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:49.760Z,1516651969.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:50.166Z,1516651970.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:50.571Z,1516651970.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:50.964Z,1516651970.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:51.368Z,1516651971.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:51.776Z,1516651971.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:52.172Z,1516651972.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:52.564Z,1516651972.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:52.961Z,1516651972.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:53.363Z,1516651973.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:53.763Z,1516651973.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:54.162Z,1516651974.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:54.572Z,1516651974.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:54.980Z,1516651974.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:55.373Z,1516651975.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:55.767Z,1516651975.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:56.172Z,1516651976.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:59.464Z,1516651979.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:59.599Z,1516651979.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:12:59.938Z,1516651979.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:00.361Z,1516651980.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:00.738Z,1516651980.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:01.148Z,1516651981.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:01.544Z,1516651981.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:01.940Z,1516651981.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:02.349Z,1516651982.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:02.746Z,1516651982.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:03.188Z,1516651983.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:03.548Z,1516651983.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:03.924Z,1516651983.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:04.324Z,1516651984.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:04.728Z,1516651984.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:05.214Z,1516651985.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:05.551Z,1516651985.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:05.953Z,1516651985.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:06.355Z,1516651986.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:06.724Z,1516651986.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:07.130Z,1516651987.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:07.533Z,1516651987.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:07.933Z,1516651987.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:08.352Z,1516651988.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:08.804Z,1516651988.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:09.156Z,1516651989.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:09.540Z,1516651989.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:09.951Z,1516651989.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:10.336Z,1516651990.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:10.744Z,1516651990.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:11.127Z,1516651991.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:11.538Z,1516651991.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:11.944Z,1516651991.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:12.340Z,1516651992.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:12.736Z,1516651992.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:13.141Z,1516651993.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:13.548Z,1516651993.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:13.942Z,1516651993.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:14.345Z,1516651994.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:14.745Z,1516651994.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:15.141Z,1516651995.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:15.538Z,1516651995.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:15.943Z,1516651995.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:16.340Z,1516651996.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:16.739Z,1516651996.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:17.204Z,1516651997.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:17.552Z,1516651997.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:17.957Z,1516651997.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:18.356Z,1516651998.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:18.728Z,1516651998.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:19.199Z,1516651999.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:19.534Z,1516651999.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:19.932Z,1516651999.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:20.339Z,1516652000.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:20.763Z,1516652000.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:21.139Z,1516652001.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:21.532Z,1516652001.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:21.937Z,1516652001.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:22.332Z,1516652002.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:22.740Z,1516652002.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:23.145Z,1516652003.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:23.546Z,1516652003.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:23.948Z,1516652003.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:24.346Z,1516652004.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:24.735Z,1516652004.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:25.144Z,1516652005.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:25.525Z,1516652005.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:25.928Z,1516652005.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:26.353Z,1516652006.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:26.750Z,1516652006.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:27.141Z,1516652007.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:27.535Z,1516652007.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:27.937Z,1516652007.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:28.338Z,1516652008.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:28.740Z,1516652008.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:29.144Z,1516652009.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:29.542Z,1516652009.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:29.946Z,1516652009.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:30.352Z,1516652010.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:30.734Z,1516652010.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:31.200Z,1516652011.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:31.525Z,1516652011.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:31.928Z,1516652011.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:32.354Z,1516652012.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:32.759Z,1516652012.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:33.215Z,1516652013.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:33.531Z,1516652013.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:33.948Z,1516652013.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:34.331Z,1516652014.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:34.729Z,1516652014.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:35.136Z,1516652015.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:35.545Z,1516652015.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:35.952Z,1516652015.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:36.341Z,1516652016.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:36.740Z,1516652016.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:37.134Z,1516652017.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:37.533Z,1516652017.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:37.932Z,1516652017.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:38.352Z,1516652018.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:38.744Z,1516652018.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:39.141Z,1516652019.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:39.539Z,1516652019.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:39.941Z,1516652019.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:40.344Z,1516652020.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:40.740Z,1516652020.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:41.144Z,1516652021.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:41.546Z,1516652021.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:41.945Z,1516652021.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:42.356Z,1516652022.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:42.735Z,1516652022.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:43.144Z,1516652023.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:43.525Z,1516652023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:43.928Z,1516652023.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:44.351Z,1516652024.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:44.752Z,1516652024.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:45.197Z,1516652025.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:45.536Z,1516652025.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:45.928Z,1516652025.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:46.342Z,1516652026.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:46.738Z,1516652026.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:47.144Z,1516652027.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:47.538Z,1516652027.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:47.938Z,1516652027.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:48.346Z,1516652028.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:48.744Z,1516652028.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:49.145Z,1516652029.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:49.544Z,1516652029.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:49.942Z,1516652029.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:50.345Z,1516652030.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:50.748Z,1516652030.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:51.148Z,1516652031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:51.542Z,1516652031.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:51.948Z,1516652031.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:52.352Z,1516652032.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:52.753Z,1516652032.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:53.149Z,1516652033.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:53.548Z,1516652033.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:53.948Z,1516652033.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:54.356Z,1516652034.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:54.752Z,1516652034.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:55.148Z,1516652035.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:55.537Z,1516652035.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:55.925Z,1516652035.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:56.356Z,1516652036.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:59.633Z,1516652039.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:13:59.780Z,1516652039.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:00.120Z,1516652040.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:00.451Z,1516652040.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:00.528Z,1516652040.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:00.917Z,1516652040.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:01.248Z,1516652041.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:01.336Z,1516652041.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:01.651Z,1516652041.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:01.726Z,1516652041.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:02.125Z,1516652042.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:02.521Z,1516652042.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:02.945Z,1516652042.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:03.334Z,1516652043.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:03.732Z,1516652043.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:04.145Z,1516652044.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:04.528Z,1516652044.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:04.953Z,1516652044.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:05.334Z,1516652045.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:05.736Z,1516652045.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:06.135Z,1516652046.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:06.524Z,1516652046.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:06.945Z,1516652046.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:07.336Z,1516652047.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:07.744Z,1516652047.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:08.144Z,1516652048.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:08.532Z,1516652048.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:08.957Z,1516652048.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:09.334Z,1516652049.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:09.735Z,1516652049.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:10.145Z,1516652050.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:10.516Z,1516652050.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:10.987Z,1516652050.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:11.336Z,1516652051.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:11.734Z,1516652051.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:12.144Z,1516652052.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:12.525Z,1516652052.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:12.924Z,1516652052.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:13.352Z,1516652053.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:13.726Z,1516652053.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:14.126Z,1516652054.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:14.459Z,1516652054.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:14.528Z,1516652054.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:14.922Z,1516652054.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:15.257Z,1516652055.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:15.329Z,1516652055.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:15.667Z,1516652055.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:15.726Z,1516652055.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:16.127Z,1516652056.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:16.523Z,1516652056.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:16.964Z,1516652056.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:17.329Z,1516652057.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:17.725Z,1516652057.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:18.126Z,1516652058.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:18.524Z,1516652058.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:18.965Z,1516652058.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:19.332Z,1516652059.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:19.729Z,1516652059.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:20.128Z,1516652060.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:20.534Z,1516652060.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:20.976Z,1516652060.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:21.324Z,1516652061.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:21.724Z,1516652061.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:22.128Z,1516652062.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:22.540Z,1516652062.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:22.975Z,1516652062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:23.337Z,1516652063.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:23.728Z,1516652063.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:24.136Z,1516652064.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:24.524Z,1516652064.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:24.913Z,1516652064.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:25.333Z,1516652065.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:25.730Z,1516652065.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:26.132Z,1516652066.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:26.536Z,1516652066.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:26.933Z,1516652066.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:27.335Z,1516652067.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:27.725Z,1516652067.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:28.124Z,1516652068.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:28.523Z,1516652068.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:28.533Z,1516652068.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:28.940Z,1516652068.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:29.320Z,1516652069.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:29.345Z,1516652069.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:29.723Z,1516652069.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:14:29.725Z,1516652069.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:30.120Z,1516652070.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:30.530Z,1516652070.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:30.985Z,1516652070.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:31.322Z,1516652071.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:31.743Z,1516652071.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:32.149Z,1516652072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:32.530Z,1516652072.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:32.967Z,1516652072.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:33.322Z,1516652073.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:33.721Z,1516652073.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:34.123Z,1516652074.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:34.538Z,1516652074.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:34.981Z,1516652074.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:35.348Z,1516652075.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:35.716Z,1516652075.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:36.138Z,1516652076.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:36.517Z,1516652076.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:36.984Z,1516652076.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:37.317Z,1516652077.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:37.743Z,1516652077.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:38.149Z,1516652078.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:38.547Z,1516652078.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:38.924Z,1516652078.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:39.326Z,1516652079.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:39.720Z,1516652079.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:40.136Z,1516652080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:40.540Z,1516652080.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:40.940Z,1516652080.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:41.347Z,1516652081.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:41.724Z,1516652081.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:42.128Z,1516652082.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:42.512Z,1516652082.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:42.912Z,1516652082.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:43.356Z,1516652083.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:43.737Z,1516652083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:44.134Z,1516652084.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:44.536Z,1516652084.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:44.988Z,1516652084.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:45.339Z,1516652085.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:45.720Z,1516652085.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:46.127Z,1516652086.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:46.536Z,1516652086.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:46.984Z,1516652086.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:47.333Z,1516652087.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:47.720Z,1516652087.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:48.123Z,1516652088.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:48.528Z,1516652088.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:48.982Z,1516652088.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:49.315Z,1516652089.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:49.726Z,1516652089.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:50.130Z,1516652090.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:50.529Z,1516652090.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:50.992Z,1516652090.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:51.327Z,1516652091.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:51.734Z,1516652091.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:52.120Z,1516652092.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:52.535Z,1516652092.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:52.942Z,1516652092.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:53.358Z,1516652093.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:53.720Z,1516652093.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:54.120Z,1516652094.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:54.516Z,1516652094.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:54.917Z,1516652094.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:55.378Z,1516652095.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:55.727Z,1516652095.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:55.730Z,1516652095.730 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:14:55.730Z,1516652095.730 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:14:55.730Z,1516652095.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:14:55.730Z,1516652095.730 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:14:56.125Z,1516652096.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:56.129Z,1516652096.129 [Default:CheckIn:D] Stopped
2018-01-22T20:14:56.129Z,1516652096.129 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:14:56.527Z,1516652096.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:14:56.531Z,1516652096.531 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.524015 min 
2018-01-22T20:14:56.531Z,1516652096.531 [Default:CheckIn:E] Stopped
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn] Stopped
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn](INFO): Running loop #12
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn] Running Loop=12
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:14:56.532Z,1516652096.532 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:14:59.935Z,1516652099.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:00.081Z,1516652100.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:00.437Z,1516652100.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:00.861Z,1516652100.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:01.230Z,1516652101.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:01.626Z,1516652101.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:02.028Z,1516652102.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:02.435Z,1516652102.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:02.840Z,1516652102.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:03.240Z,1516652103.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:03.630Z,1516652103.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:04.027Z,1516652104.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:04.441Z,1516652104.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:04.840Z,1516652104.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:05.248Z,1516652105.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:05.640Z,1516652105.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:06.032Z,1516652106.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:06.440Z,1516652106.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:06.840Z,1516652106.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:07.248Z,1516652107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:07.636Z,1516652107.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:08.040Z,1516652108.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:08.440Z,1516652108.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:08.888Z,1516652108.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:09.240Z,1516652109.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:09.628Z,1516652109.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:10.036Z,1516652110.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:10.446Z,1516652110.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:10.559Z,1516652110.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:10.852Z,1516652110.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:11.241Z,1516652111.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:11.355Z,1516652111.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:11.645Z,1516652111.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:11.767Z,1516652111.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:12.023Z,1516652112.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:12.441Z,1516652112.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:12.563Z,1516652112.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:12.856Z,1516652112.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:13.252Z,1516652113.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:13.359Z,1516652113.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:13.627Z,1516652113.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:13.763Z,1516652113.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:14.040Z,1516652114.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:14.434Z,1516652114.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:14.855Z,1516652114.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:15.260Z,1516652115.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:15.632Z,1516652115.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:16.023Z,1516652116.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:16.438Z,1516652116.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:16.833Z,1516652116.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:17.229Z,1516652117.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:17.628Z,1516652117.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:18.028Z,1516652118.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:18.434Z,1516652118.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:18.834Z,1516652118.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:19.231Z,1516652119.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:19.636Z,1516652119.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:20.039Z,1516652120.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:20.440Z,1516652120.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:20.835Z,1516652120.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:21.250Z,1516652121.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:21.629Z,1516652121.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:22.032Z,1516652122.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:22.442Z,1516652122.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:22.841Z,1516652122.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:23.241Z,1516652123.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:23.632Z,1516652123.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:24.034Z,1516652124.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:24.436Z,1516652124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:24.567Z,1516652124.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:24.842Z,1516652124.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:25.240Z,1516652125.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:25.366Z,1516652125.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:25.638Z,1516652125.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:25.775Z,1516652125.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:26.036Z,1516652126.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:26.434Z,1516652126.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:26.571Z,1516652126.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:26.829Z,1516652126.829 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:26.829Z,1516652126.829 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-01-22T20:15:26.829Z,1516652126.829 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:15:26.831Z,1516652126.831 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:26.831Z,1516652126.831 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-01-22T20:15:26.831Z,1516652126.831 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:15:26.833Z,1516652126.833 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:26.833Z,1516652126.833 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-01-22T20:15:26.833Z,1516652126.833 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:15:26.845Z,1516652126.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:15:26.845Z,1516652126.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:15:26.845Z,1516652126.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:15:27.241Z,1516652127.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:15:27.241Z,1516652127.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-01-22T20:15:27.242Z,1516652127.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:15:27.242Z,1516652127.242 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-01-22T20:15:27.242Z,1516652127.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:15:27.242Z,1516652127.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-01-22T20:15:27.367Z,1516652127.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:27.654Z,1516652127.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:15:27.655Z,1516652127.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:15:27.655Z,1516652127.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:15:27.656Z,1516652127.656 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:15:27.656Z,1516652127.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:15:27.656Z,1516652127.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:15:27.657Z,1516652127.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:15:27.657Z,1516652127.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:15:27.657Z,1516652127.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:15:27.771Z,1516652127.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:28.048Z,1516652128.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:28.452Z,1516652128.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:28.838Z,1516652128.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:29.235Z,1516652129.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:29.620Z,1516652129.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:30.044Z,1516652130.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:30.457Z,1516652130.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:30.854Z,1516652130.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:31.252Z,1516652131.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:31.655Z,1516652131.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:32.027Z,1516652132.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:32.428Z,1516652132.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:32.828Z,1516652132.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:33.232Z,1516652133.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:33.634Z,1516652133.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:34.034Z,1516652134.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:34.434Z,1516652134.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:34.832Z,1516652134.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:35.226Z,1516652135.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:35.625Z,1516652135.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:36.082Z,1516652136.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:36.426Z,1516652136.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:36.833Z,1516652136.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:37.233Z,1516652137.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:37.636Z,1516652137.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:38.027Z,1516652138.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:38.436Z,1516652138.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:38.591Z,1516652138.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:38.832Z,1516652138.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:39.240Z,1516652139.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:39.389Z,1516652139.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:39.636Z,1516652139.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:39.795Z,1516652139.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:40.040Z,1516652140.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:40.436Z,1516652140.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:40.591Z,1516652140.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:40.827Z,1516652140.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:41.225Z,1516652141.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:41.387Z,1516652141.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:41.630Z,1516652141.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:41.791Z,1516652141.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:42.034Z,1516652142.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:42.432Z,1516652142.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:42.841Z,1516652142.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:43.252Z,1516652143.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:43.645Z,1516652143.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:44.036Z,1516652144.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:44.435Z,1516652144.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:44.840Z,1516652144.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:45.246Z,1516652145.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:45.644Z,1516652145.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:46.048Z,1516652146.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:46.449Z,1516652146.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:46.836Z,1516652146.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:47.219Z,1516652147.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:47.620Z,1516652147.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:47.642Z,1516652147.642 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:15:48.028Z,1516652148.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:48.428Z,1516652148.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:48.853Z,1516652148.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:49.256Z,1516652149.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:49.649Z,1516652149.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:50.032Z,1516652150.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:50.424Z,1516652150.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:50.823Z,1516652150.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:51.234Z,1516652151.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:51.657Z,1516652151.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:52.037Z,1516652152.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:52.433Z,1516652152.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:52.611Z,1516652152.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:52.831Z,1516652152.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:53.228Z,1516652153.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:53.411Z,1516652153.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:53.627Z,1516652153.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:53.819Z,1516652153.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:54.027Z,1516652154.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:54.440Z,1516652154.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:54.615Z,1516652154.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:54.837Z,1516652154.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:55.233Z,1516652155.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:55.411Z,1516652155.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:55.633Z,1516652155.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:55.815Z,1516652155.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:15:56.040Z,1516652156.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:56.435Z,1516652156.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:15:56.838Z,1516652156.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:00.121Z,1516652160.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:00.269Z,1516652160.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:00.600Z,1516652160.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:00.994Z,1516652160.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:01.396Z,1516652161.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:01.792Z,1516652161.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:02.196Z,1516652162.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:02.611Z,1516652162.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:03.000Z,1516652163.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:03.404Z,1516652163.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:03.792Z,1516652163.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:04.192Z,1516652164.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:04.596Z,1516652164.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:04.992Z,1516652164.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:05.455Z,1516652165.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:05.794Z,1516652165.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:06.197Z,1516652166.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:06.600Z,1516652166.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:06.986Z,1516652166.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:07.453Z,1516652167.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:07.792Z,1516652167.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:08.196Z,1516652168.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:08.610Z,1516652168.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:09.000Z,1516652169.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:09.408Z,1516652169.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:09.792Z,1516652169.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:10.192Z,1516652170.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:10.596Z,1516652170.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:10.988Z,1516652170.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:11.395Z,1516652171.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:11.805Z,1516652171.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:12.202Z,1516652172.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:12.610Z,1516652172.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:13.011Z,1516652173.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:13.400Z,1516652173.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:13.784Z,1516652173.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:14.180Z,1516652174.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:14.605Z,1516652174.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:15.007Z,1516652175.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:15.411Z,1516652175.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:15.792Z,1516652175.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:16.184Z,1516652176.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:16.589Z,1516652176.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:16.988Z,1516652176.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:17.392Z,1516652177.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:17.796Z,1516652177.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:18.200Z,1516652178.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:18.596Z,1516652178.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:18.987Z,1516652178.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:19.386Z,1516652179.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:19.797Z,1516652179.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:20.192Z,1516652180.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:20.600Z,1516652180.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:21.003Z,1516652181.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:21.467Z,1516652181.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:21.792Z,1516652181.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:22.192Z,1516652182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:22.595Z,1516652182.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:22.988Z,1516652182.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:23.407Z,1516652183.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:23.814Z,1516652183.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:24.197Z,1516652184.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:24.600Z,1516652184.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:24.986Z,1516652184.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:25.392Z,1516652185.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:25.792Z,1516652185.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:26.191Z,1516652186.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:26.600Z,1516652186.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:26.997Z,1516652186.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:27.401Z,1516652187.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:27.796Z,1516652187.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:28.189Z,1516652188.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:28.597Z,1516652188.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:28.993Z,1516652188.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:29.397Z,1516652189.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:29.811Z,1516652189.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:30.203Z,1516652190.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:30.607Z,1516652190.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:31.001Z,1516652191.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:31.404Z,1516652191.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:31.798Z,1516652191.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:32.201Z,1516652192.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:32.611Z,1516652192.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:33.004Z,1516652193.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:33.405Z,1516652193.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:33.788Z,1516652193.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:34.188Z,1516652194.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:34.594Z,1516652194.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:34.997Z,1516652194.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:35.400Z,1516652195.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:35.792Z,1516652195.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:36.188Z,1516652196.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:36.601Z,1516652196.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:36.000Z,1516652197.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:37.397Z,1516652197.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:37.792Z,1516652197.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:38.192Z,1516652198.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:38.601Z,1516652198.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:39.001Z,1516652199.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:39.401Z,1516652199.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:39.796Z,1516652199.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:40.188Z,1516652200.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:40.606Z,1516652200.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:41.000Z,1516652201.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:41.399Z,1516652201.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:41.788Z,1516652201.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:42.179Z,1516652202.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:42.603Z,1516652202.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:43.005Z,1516652203.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:43.409Z,1516652203.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:43.785Z,1516652203.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:44.205Z,1516652204.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:44.616Z,1516652204.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:45.040Z,1516652205.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:45.444Z,1516652205.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:45.800Z,1516652205.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:46.197Z,1516652206.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:46.596Z,1516652206.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:46.992Z,1516652206.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:47.396Z,1516652207.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:47.832Z,1516652207.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:48.200Z,1516652208.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:48.628Z,1516652208.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:48.989Z,1516652208.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:49.397Z,1516652209.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:49.818Z,1516652209.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:50.201Z,1516652210.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:50.616Z,1516652210.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:51.012Z,1516652211.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:51.456Z,1516652211.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:51.808Z,1516652211.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:52.193Z,1516652212.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:52.624Z,1516652212.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:53.024Z,1516652213.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:53.428Z,1516652213.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:53.834Z,1516652213.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:54.192Z,1516652214.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:54.594Z,1516652214.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:54.000Z,1516652215.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:55.424Z,1516652215.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:55.795Z,1516652215.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:56.196Z,1516652216.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:56.596Z,1516652216.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:16:56.996Z,1516652216.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:00.280Z,1516652220.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:00.424Z,1516652220.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:00.746Z,1516652220.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:01.150Z,1516652221.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:01.571Z,1516652221.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:01.950Z,1516652221.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:02.351Z,1516652222.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:02.750Z,1516652222.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:03.146Z,1516652223.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:03.580Z,1516652223.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:03.964Z,1516652223.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:04.345Z,1516652224.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:04.764Z,1516652224.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:05.224Z,1516652225.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:05.574Z,1516652225.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:05.966Z,1516652225.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:06.344Z,1516652226.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:06.740Z,1516652226.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:07.238Z,1516652227.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:07.541Z,1516652227.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:07.968Z,1516652227.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:08.370Z,1516652228.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:08.774Z,1516652228.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:09.202Z,1516652229.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:09.552Z,1516652229.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:09.952Z,1516652229.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:10.348Z,1516652230.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:10.768Z,1516652230.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:11.219Z,1516652231.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:11.563Z,1516652231.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:11.968Z,1516652231.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:12.341Z,1516652232.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:12.744Z,1516652232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:13.140Z,1516652233.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:13.558Z,1516652233.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:13.968Z,1516652233.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:14.360Z,1516652234.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:14.757Z,1516652234.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:15.152Z,1516652235.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:15.592Z,1516652235.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:15.954Z,1516652235.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:16.352Z,1516652236.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:16.762Z,1516652236.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:17.159Z,1516652237.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:17.612Z,1516652237.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:17.955Z,1516652237.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:18.356Z,1516652238.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:18.756Z,1516652238.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:19.198Z,1516652239.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:19.548Z,1516652239.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:19.974Z,1516652239.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:20.374Z,1516652240.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:20.745Z,1516652240.745 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:17:20.745Z,1516652240.745 [BPC1] Communications Fault, FailCount= 3
2018-01-22T20:17:20.745Z,1516652240.745 [BPC1](ERROR): Communications Fault
2018-01-22T20:17:20.752Z,1516652240.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:20.789Z,1516652240.789 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:17:21.208Z,1516652241.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:21.544Z,1516652241.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:21.956Z,1516652241.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:21.977Z,1516652241.977 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:17:21.977Z,1516652241.977 [BPC1] No Fault, FailCount= 3
2018-01-22T20:17:22.400Z,1516652242.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:22.704Z,1516652242.704 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T20:17:22.705Z,1516652242.705 [NAL9602] Data Fault, FailCount= 2
2018-01-22T20:17:22.705Z,1516652242.705 [NAL9602](ERROR): Data Fault
2018-01-22T20:17:22.764Z,1516652242.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:22.777Z,1516652242.777 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T20:17:23.100Z,1516652243.100 [NAL9602](INFO): Powering down
2018-01-22T20:17:23.215Z,1516652243.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:23.561Z,1516652243.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:23.953Z,1516652243.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:23.966Z,1516652243.966 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T20:17:23.966Z,1516652243.966 [NAL9602] No Fault, FailCount= 2
2018-01-22T20:17:24.332Z,1516652244.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:24.732Z,1516652244.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:25.136Z,1516652245.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:25.539Z,1516652245.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:25.944Z,1516652245.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:26.338Z,1516652246.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:26.794Z,1516652246.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:27.138Z,1516652247.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:27.536Z,1516652247.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:27.940Z,1516652247.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:28.339Z,1516652248.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:28.740Z,1516652248.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:29.132Z,1516652249.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:29.569Z,1516652249.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:29.940Z,1516652249.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:30.356Z,1516652250.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:30.739Z,1516652250.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:31.140Z,1516652251.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:31.584Z,1516652251.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:31.935Z,1516652251.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:32.344Z,1516652252.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:32.744Z,1516652252.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:33.186Z,1516652253.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:33.552Z,1516652253.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:33.931Z,1516652253.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:34.360Z,1516652254.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:34.759Z,1516652254.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:35.131Z,1516652255.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:35.565Z,1516652255.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:35.943Z,1516652255.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:36.339Z,1516652256.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:36.738Z,1516652256.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:37.139Z,1516652257.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:37.554Z,1516652257.554 [BPC1](INFO): Initialized
2018-01-22T20:17:37.579Z,1516652257.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:37.950Z,1516652257.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:38.342Z,1516652258.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:38.744Z,1516652258.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:39.143Z,1516652259.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:39.556Z,1516652259.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:39.940Z,1516652259.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:40.353Z,1516652260.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:40.755Z,1516652260.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:41.143Z,1516652261.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:41.553Z,1516652261.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:41.952Z,1516652261.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:42.356Z,1516652262.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:42.740Z,1516652262.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:43.140Z,1516652263.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:43.623Z,1516652263.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:43.953Z,1516652263.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:44.352Z,1516652264.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:44.748Z,1516652264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:45.145Z,1516652265.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:45.606Z,1516652265.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:45.947Z,1516652265.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:46.351Z,1516652266.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:46.760Z,1516652266.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:47.148Z,1516652267.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:47.544Z,1516652267.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:47.952Z,1516652267.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:48.351Z,1516652268.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:48.747Z,1516652268.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:49.156Z,1516652269.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:49.548Z,1516652269.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:49.952Z,1516652269.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:50.336Z,1516652270.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:50.760Z,1516652270.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:51.144Z,1516652271.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:51.542Z,1516652271.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:51.947Z,1516652271.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:52.341Z,1516652272.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:52.748Z,1516652272.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:53.104Z,1516652273.104 [NAL9602](INFO): Powering up NAL9602
2018-01-22T20:17:53.152Z,1516652273.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:53.548Z,1516652273.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:53.941Z,1516652273.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:54.346Z,1516652274.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:54.748Z,1516652274.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:55.148Z,1516652275.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:55.548Z,1516652275.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:55.944Z,1516652275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:56.348Z,1516652276.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:56.743Z,1516652276.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:17:57.147Z,1516652277.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:00.450Z,1516652280.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:00.583Z,1516652280.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:00.913Z,1516652280.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:01.337Z,1516652281.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:01.720Z,1516652281.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:02.119Z,1516652282.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:02.514Z,1516652282.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:02.910Z,1516652282.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:03.324Z,1516652283.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:03.726Z,1516652283.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:04.076Z,1516652284.076 [NAL9602](INFO): NAL9602 initialized
2018-01-22T20:18:04.123Z,1516652284.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:04.527Z,1516652284.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:04.934Z,1516652284.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:05.328Z,1516652285.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:05.733Z,1516652285.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:06.123Z,1516652286.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:06.521Z,1516652286.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:06.927Z,1516652286.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:07.334Z,1516652287.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:07.737Z,1516652287.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:08.135Z,1516652288.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:08.542Z,1516652288.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:08.923Z,1516652288.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:09.355Z,1516652289.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:09.712Z,1516652289.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:10.108Z,1516652290.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:10.507Z,1516652290.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:10.934Z,1516652290.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:11.321Z,1516652291.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:11.749Z,1516652291.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:12.120Z,1516652292.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:12.510Z,1516652292.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:12.916Z,1516652292.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:13.310Z,1516652293.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:13.748Z,1516652293.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:14.146Z,1516652294.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:14.526Z,1516652294.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:14.912Z,1516652294.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:15.330Z,1516652295.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:15.720Z,1516652295.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:16.114Z,1516652296.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:16.514Z,1516652296.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:16.922Z,1516652296.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:17.342Z,1516652297.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:17.722Z,1516652297.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:18.124Z,1516652298.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:18.520Z,1516652298.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:18.917Z,1516652298.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:19.348Z,1516652299.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:19.722Z,1516652299.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:20.121Z,1516652300.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:20.528Z,1516652300.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:20.915Z,1516652300.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:21.357Z,1516652301.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:21.724Z,1516652301.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:22.121Z,1516652302.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:22.523Z,1516652302.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:22.929Z,1516652302.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:23.377Z,1516652303.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:23.739Z,1516652303.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:24.128Z,1516652304.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:24.507Z,1516652304.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:24.908Z,1516652304.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:25.304Z,1516652305.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:25.734Z,1516652305.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:26.139Z,1516652306.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:26.530Z,1516652306.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:26.907Z,1516652306.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:27.312Z,1516652307.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:27.740Z,1516652307.740 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:27.740Z,1516652307.740 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-01-22T20:18:27.740Z,1516652307.740 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:18:27.742Z,1516652307.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:27.742Z,1516652307.742 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-01-22T20:18:27.742Z,1516652307.742 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:18:27.748Z,1516652307.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:27.748Z,1516652307.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-01-22T20:18:27.748Z,1516652307.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:18:27.772Z,1516652307.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:18:27.772Z,1516652307.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:18:27.772Z,1516652307.772 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:18:28.158Z,1516652308.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:18:28.158Z,1516652308.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-01-22T20:18:28.163Z,1516652308.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:18:28.163Z,1516652308.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-01-22T20:18:28.163Z,1516652308.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:18:28.164Z,1516652308.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-01-22T20:18:28.513Z,1516652308.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:18:28.513Z,1516652308.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:18:28.514Z,1516652308.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:18:28.514Z,1516652308.514 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:18:28.519Z,1516652308.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:18:28.519Z,1516652308.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:18:28.519Z,1516652308.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:18:28.520Z,1516652308.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:18:28.520Z,1516652308.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:18:28.928Z,1516652308.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:29.364Z,1516652309.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:29.736Z,1516652309.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:30.120Z,1516652310.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:30.528Z,1516652310.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:30.908Z,1516652310.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:31.345Z,1516652311.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:31.726Z,1516652311.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:32.132Z,1516652312.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:32.530Z,1516652312.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:32.912Z,1516652312.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:33.358Z,1516652313.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:33.726Z,1516652313.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:34.116Z,1516652314.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:34.511Z,1516652314.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:34.934Z,1516652314.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:35.370Z,1516652315.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:35.725Z,1516652315.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:36.114Z,1516652316.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:36.514Z,1516652316.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:36.923Z,1516652316.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:37.382Z,1516652317.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:37.728Z,1516652317.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:38.129Z,1516652318.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:38.525Z,1516652318.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:38.920Z,1516652318.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:39.326Z,1516652319.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:39.732Z,1516652319.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:40.119Z,1516652320.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:40.526Z,1516652320.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:40.930Z,1516652320.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:41.336Z,1516652321.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:41.731Z,1516652321.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:42.122Z,1516652322.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:42.524Z,1516652322.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:42.918Z,1516652322.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:43.363Z,1516652323.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:43.736Z,1516652323.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:44.133Z,1516652324.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:44.541Z,1516652324.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:44.945Z,1516652324.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:45.392Z,1516652325.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:45.711Z,1516652325.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:46.116Z,1516652326.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:46.511Z,1516652326.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:46.942Z,1516652326.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:47.380Z,1516652327.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:47.725Z,1516652327.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:48.115Z,1516652328.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:48.516Z,1516652328.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:48.923Z,1516652328.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:49.372Z,1516652329.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:49.733Z,1516652329.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:50.130Z,1516652330.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:50.534Z,1516652330.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:50.908Z,1516652330.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:51.312Z,1516652331.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:51.713Z,1516652331.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:52.111Z,1516652332.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:52.515Z,1516652332.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:52.919Z,1516652332.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:53.317Z,1516652333.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:53.746Z,1516652333.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:54.119Z,1516652334.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:54.512Z,1516652334.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:54.928Z,1516652334.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:55.323Z,1516652335.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:55.737Z,1516652335.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:56.129Z,1516652336.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:56.533Z,1516652336.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:56.924Z,1516652336.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:18:57.379Z,1516652337.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:00.604Z,1516652340.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:00.731Z,1516652340.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:01.108Z,1516652341.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:01.507Z,1516652341.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:01.906Z,1516652341.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:02.299Z,1516652342.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:02.707Z,1516652342.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:03.096Z,1516652343.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:03.504Z,1516652343.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:03.909Z,1516652343.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:04.310Z,1516652344.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:04.715Z,1516652344.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:05.103Z,1516652345.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:05.504Z,1516652345.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:05.901Z,1516652345.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:06.299Z,1516652346.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:06.712Z,1516652346.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:07.111Z,1516652347.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:07.516Z,1516652347.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:07.912Z,1516652347.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:08.312Z,1516652348.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:08.716Z,1516652348.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:09.116Z,1516652349.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:09.516Z,1516652349.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:09.912Z,1516652349.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:10.292Z,1516652350.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:10.717Z,1516652350.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:11.117Z,1516652351.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:11.520Z,1516652351.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:11.899Z,1516652351.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:12.297Z,1516652352.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:12.701Z,1516652352.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:13.120Z,1516652353.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:13.504Z,1516652353.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:13.901Z,1516652353.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:14.296Z,1516652354.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:14.727Z,1516652354.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:15.106Z,1516652355.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:15.505Z,1516652355.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:15.902Z,1516652355.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:16.313Z,1516652356.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:16.709Z,1516652356.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:17.107Z,1516652357.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:17.502Z,1516652357.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:17.911Z,1516652357.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:18.295Z,1516652358.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:18.705Z,1516652358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:19.103Z,1516652359.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:19.531Z,1516652359.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:19.898Z,1516652359.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:20.311Z,1516652360.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:20.717Z,1516652360.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:21.122Z,1516652361.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:21.514Z,1516652361.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:21.916Z,1516652361.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:22.313Z,1516652362.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:22.697Z,1516652362.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:23.104Z,1516652363.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:23.501Z,1516652363.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:23.896Z,1516652363.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:24.296Z,1516652364.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:24.704Z,1516652364.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:25.111Z,1516652365.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:25.506Z,1516652365.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:25.896Z,1516652365.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:26.290Z,1516652366.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:26.712Z,1516652366.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:27.111Z,1516652367.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:27.543Z,1516652367.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:27.896Z,1516652367.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:28.297Z,1516652368.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:28.720Z,1516652368.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:29.112Z,1516652369.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:29.501Z,1516652369.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:29.896Z,1516652369.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:30.296Z,1516652370.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:30.708Z,1516652370.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:31.112Z,1516652371.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:31.512Z,1516652371.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:31.884Z,1516652371.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:32.288Z,1516652372.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:32.713Z,1516652372.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:33.116Z,1516652373.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:33.524Z,1516652373.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:33.918Z,1516652373.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:34.315Z,1516652374.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:34.725Z,1516652374.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:35.130Z,1516652375.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:35.512Z,1516652375.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:35.896Z,1516652375.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:36.288Z,1516652376.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:36.718Z,1516652376.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:37.097Z,1516652377.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:37.498Z,1516652377.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:37.893Z,1516652377.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:38.294Z,1516652378.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:38.709Z,1516652378.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:39.106Z,1516652379.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:39.508Z,1516652379.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:39.900Z,1516652379.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:40.304Z,1516652380.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:40.702Z,1516652380.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:41.106Z,1516652381.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:41.506Z,1516652381.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:41.910Z,1516652381.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:42.300Z,1516652382.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:42.690Z,1516652382.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:43.099Z,1516652383.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:43.496Z,1516652383.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:43.898Z,1516652383.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:44.297Z,1516652384.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:44.698Z,1516652384.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:45.094Z,1516652385.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:45.496Z,1516652385.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:45.900Z,1516652385.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:46.300Z,1516652386.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:46.696Z,1516652386.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:47.112Z,1516652387.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:47.533Z,1516652387.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:47.906Z,1516652387.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:48.284Z,1516652388.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:48.688Z,1516652388.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:49.088Z,1516652389.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:49.491Z,1516652389.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:49.921Z,1516652389.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:50.321Z,1516652390.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:50.722Z,1516652390.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:51.091Z,1516652391.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:51.491Z,1516652391.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:51.896Z,1516652391.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:52.300Z,1516652392.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:52.692Z,1516652392.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:53.112Z,1516652393.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:53.505Z,1516652393.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:53.911Z,1516652393.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:54.308Z,1516652394.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:54.704Z,1516652394.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:55.100Z,1516652395.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:55.510Z,1516652395.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:55.909Z,1516652395.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:56.312Z,1516652396.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:56.714Z,1516652396.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:56.718Z,1516652396.718 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:14:56.5Z
2018-01-22T20:19:56.718Z,1516652396.718 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T20:19:56.718Z,1516652396.718 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T20:19:57.084Z,1516652397.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:19:57.617Z,1516652397.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:00.860Z,1516652400.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:00.939Z,1516652400.939 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0048.lzma
2018-01-22T20:20:00.999Z,1516652400.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:01.334Z,1516652401.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:01.689Z,1516652401.689 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0048.lzma.bak
2018-01-22T20:20:01.689Z,1516652401.689 [DataOverHttps](INFO): SBD MOMSN=7751474
2018-01-22T20:20:01.748Z,1516652401.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:02.342Z,1516652402.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:02.533Z,1516652402.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:05.892Z,1516652405.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:06.005Z,1516652406.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:06.395Z,1516652406.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:06.812Z,1516652406.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:07.190Z,1516652407.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:07.608Z,1516652407.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:10.843Z,1516652410.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:10.924Z,1516652410.924 [DataOverHttps](INFO): Sending 129 bytes from file Logs/20180122T180533/Express0049.lzma
2018-01-22T20:20:10.981Z,1516652410.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:11.322Z,1516652411.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:11.669Z,1516652411.669 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0049.lzma.bak
2018-01-22T20:20:11.669Z,1516652411.669 [DataOverHttps](INFO): SBD MOMSN=7751476
2018-01-22T20:20:11.733Z,1516652411.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:12.326Z,1516652412.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:12.329Z,1516652412.329 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T20:20:12.329Z,1516652412.329 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T20:20:12.329Z,1516652412.329 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T20:20:12.521Z,1516652412.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:15.867Z,1516652415.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:16.010Z,1516652416.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:16.362Z,1516652416.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:16.774Z,1516652416.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:17.165Z,1516652417.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:17.548Z,1516652417.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:17.951Z,1516652417.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:18.344Z,1516652418.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:18.750Z,1516652418.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:19.150Z,1516652419.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:19.550Z,1516652419.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:19.953Z,1516652419.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:20.356Z,1516652420.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:20.765Z,1516652420.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:21.160Z,1516652421.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:21.568Z,1516652421.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:21.952Z,1516652421.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:22.353Z,1516652422.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:22.737Z,1516652422.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:23.166Z,1516652423.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:23.562Z,1516652423.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:23.968Z,1516652423.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:24.344Z,1516652424.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:24.740Z,1516652424.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:25.145Z,1516652425.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:25.545Z,1516652425.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:25.951Z,1516652425.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:26.351Z,1516652426.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:26.750Z,1516652426.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:27.144Z,1516652427.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:27.554Z,1516652427.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:27.948Z,1516652427.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:28.345Z,1516652428.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:28.755Z,1516652428.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:29.164Z,1516652429.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:29.609Z,1516652429.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:29.985Z,1516652429.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:30.340Z,1516652430.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:30.744Z,1516652430.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:31.136Z,1516652431.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:31.544Z,1516652431.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:31.956Z,1516652431.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:32.351Z,1516652432.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:32.760Z,1516652432.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:33.140Z,1516652433.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:33.540Z,1516652433.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:33.944Z,1516652433.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:34.344Z,1516652434.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:34.744Z,1516652434.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:35.160Z,1516652435.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:35.583Z,1516652435.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:35.972Z,1516652435.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:36.356Z,1516652436.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:36.772Z,1516652436.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:37.145Z,1516652437.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:37.582Z,1516652437.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:37.952Z,1516652437.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:38.352Z,1516652438.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:38.752Z,1516652438.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:39.152Z,1516652439.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:39.580Z,1516652439.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:39.981Z,1516652439.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:40.342Z,1516652440.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:40.742Z,1516652440.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:41.165Z,1516652441.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:41.588Z,1516652441.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:41.957Z,1516652441.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:42.353Z,1516652442.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:42.744Z,1516652442.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:43.156Z,1516652443.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:43.598Z,1516652443.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:43.968Z,1516652443.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:44.370Z,1516652444.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:44.759Z,1516652444.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:45.148Z,1516652445.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:45.560Z,1516652445.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:45.963Z,1516652445.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:46.271Z,1516652446.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:20:46.349Z,1516652446.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:46.756Z,1516652446.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:47.069Z,1516652447.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:20:47.153Z,1516652447.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:47.556Z,1516652447.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:47.964Z,1516652447.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:48.345Z,1516652448.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:48.744Z,1516652448.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:49.160Z,1516652449.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:49.573Z,1516652449.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:49.958Z,1516652449.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:50.362Z,1516652450.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:50.759Z,1516652450.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:51.104Z,1516652451.104 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-01-22T20:20:51.104Z,1516652451.104 [DropWeight] Hardware Fault, FailCount= 1
2018-01-22T20:20:51.104Z,1516652451.104 [DropWeight](ERROR): Hardware Fault
2018-01-22T20:20:51.164Z,1516652451.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:51.188Z,1516652451.188 [CBIT](INFO): Critical error at 20180122T202051
2018-01-22T20:20:51.190Z,1516652451.190 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-01-22T20:20:51.190Z,1516652451.190 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-01-22T20:20:51.566Z,1516652451.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:51.586Z,1516652451.586 [CBIT](INFO): Critical error at 20180122T202051
2018-01-22T20:20:51.948Z,1516652451.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:52.336Z,1516652452.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:52.744Z,1516652452.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:53.159Z,1516652453.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:53.588Z,1516652453.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:53.966Z,1516652453.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:54.346Z,1516652454.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:54.743Z,1516652454.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:55.142Z,1516652455.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:55.580Z,1516652455.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:55.954Z,1516652455.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:56.358Z,1516652456.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:56.758Z,1516652456.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:57.152Z,1516652457.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:57.601Z,1516652457.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:57.948Z,1516652457.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:58.354Z,1516652458.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:58.752Z,1516652458.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:59.160Z,1516652459.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:59.558Z,1516652459.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:20:59.969Z,1516652459.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:00.360Z,1516652460.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:00.755Z,1516652460.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:01.152Z,1516652461.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:01.549Z,1516652461.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:01.969Z,1516652461.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:02.372Z,1516652462.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:02.762Z,1516652462.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:03.152Z,1516652463.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:03.587Z,1516652463.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:03.948Z,1516652463.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:04.349Z,1516652464.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:04.752Z,1516652464.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:05.158Z,1516652465.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:05.604Z,1516652465.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:05.984Z,1516652465.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:06.354Z,1516652466.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:06.753Z,1516652466.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:07.156Z,1516652467.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:07.607Z,1516652467.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:07.972Z,1516652467.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:08.362Z,1516652468.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:08.758Z,1516652468.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:09.144Z,1516652469.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:09.610Z,1516652469.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:09.944Z,1516652469.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:10.353Z,1516652470.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:10.748Z,1516652470.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:11.156Z,1516652471.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:11.618Z,1516652471.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:11.972Z,1516652471.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:12.341Z,1516652472.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:12.739Z,1516652472.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:16.085Z,1516652476.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:16.228Z,1516652476.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:16.584Z,1516652476.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:16.984Z,1516652476.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:17.381Z,1516652477.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:17.784Z,1516652477.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:18.184Z,1516652478.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:18.576Z,1516652478.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:18.982Z,1516652478.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:19.385Z,1516652479.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:19.800Z,1516652479.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:20.182Z,1516652480.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:20.580Z,1516652480.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:20.984Z,1516652480.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:21.365Z,1516652481.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:21.792Z,1516652481.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:22.192Z,1516652482.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:22.596Z,1516652482.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:22.994Z,1516652482.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:23.366Z,1516652483.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:23.772Z,1516652483.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:24.172Z,1516652484.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:24.566Z,1516652484.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:24.998Z,1516652484.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:25.397Z,1516652485.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:25.793Z,1516652485.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:26.171Z,1516652486.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:26.576Z,1516652486.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:26.967Z,1516652486.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:27.367Z,1516652487.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:27.771Z,1516652487.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:28.199Z,1516652488.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:28.581Z,1516652488.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:28.581Z,1516652488.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-01-22T20:21:28.581Z,1516652488.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:21:28.599Z,1516652488.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:28.600Z,1516652488.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-01-22T20:21:28.600Z,1516652488.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:21:28.601Z,1516652488.601 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:28.601Z,1516652488.601 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-01-22T20:21:28.602Z,1516652488.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:21:28.618Z,1516652488.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:21:28.618Z,1516652488.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:21:28.618Z,1516652488.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:21:28.998Z,1516652488.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:21:28.998Z,1516652488.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-01-22T20:21:28.999Z,1516652488.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:21:28.999Z,1516652488.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-01-22T20:21:28.999Z,1516652488.999 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:21:28.999Z,1516652488.999 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-01-22T20:21:29.376Z,1516652489.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:21:29.376Z,1516652489.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:21:29.376Z,1516652489.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:21:29.377Z,1516652489.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:21:29.377Z,1516652489.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:21:29.377Z,1516652489.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:21:29.378Z,1516652489.378 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:21:29.378Z,1516652489.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:21:29.379Z,1516652489.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:21:29.781Z,1516652489.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:30.183Z,1516652490.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:30.580Z,1516652490.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:30.984Z,1516652490.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:31.385Z,1516652491.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:31.788Z,1516652491.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:32.181Z,1516652492.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:32.583Z,1516652492.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:32.981Z,1516652492.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:33.371Z,1516652493.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:33.790Z,1516652493.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:34.182Z,1516652494.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:34.587Z,1516652494.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:34.988Z,1516652494.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:35.368Z,1516652495.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:35.791Z,1516652495.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:36.168Z,1516652496.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:36.596Z,1516652496.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:36.983Z,1516652496.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:37.396Z,1516652497.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:37.774Z,1516652497.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:38.168Z,1516652498.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:38.572Z,1516652498.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:38.981Z,1516652498.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:39.376Z,1516652499.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:39.776Z,1516652499.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:40.174Z,1516652500.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:40.577Z,1516652500.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:40.977Z,1516652500.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:41.368Z,1516652501.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:41.770Z,1516652501.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:42.180Z,1516652502.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:42.577Z,1516652502.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:42.988Z,1516652502.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:43.149Z,1516652503.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:21:43.386Z,1516652503.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:43.781Z,1516652503.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:43.945Z,1516652503.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:21:44.183Z,1516652504.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:44.355Z,1516652504.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:21:44.575Z,1516652504.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:44.980Z,1516652504.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:45.374Z,1516652505.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:45.774Z,1516652505.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:46.228Z,1516652506.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:46.585Z,1516652506.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:47.000Z,1516652507.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:47.388Z,1516652507.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:47.791Z,1516652507.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:48.181Z,1516652508.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:48.586Z,1516652508.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:48.986Z,1516652508.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:49.417Z,1516652509.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:49.810Z,1516652509.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:50.167Z,1516652510.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:50.597Z,1516652510.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:50.984Z,1516652510.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:51.388Z,1516652511.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:51.787Z,1516652511.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:52.220Z,1516652512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:52.596Z,1516652512.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:53.013Z,1516652513.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:53.421Z,1516652513.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:53.809Z,1516652513.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:54.208Z,1516652514.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:54.597Z,1516652514.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:54.998Z,1516652514.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:55.413Z,1516652515.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:55.784Z,1516652515.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:56.187Z,1516652516.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:56.600Z,1516652516.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:56.997Z,1516652516.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:57.377Z,1516652517.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:57.780Z,1516652517.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:58.188Z,1516652518.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:58.587Z,1516652518.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:58.996Z,1516652518.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:59.376Z,1516652519.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:21:59.788Z,1516652519.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:00.188Z,1516652520.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:00.581Z,1516652520.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:00.994Z,1516652520.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:01.405Z,1516652521.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:01.795Z,1516652521.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:02.189Z,1516652522.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:02.574Z,1516652522.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:02.995Z,1516652522.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:03.366Z,1516652523.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x1855 got:0x4785
2018-01-22T20:22:03.401Z,1516652523.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:03.779Z,1516652523.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:04.183Z,1516652524.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:04.584Z,1516652524.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:04.980Z,1516652524.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:05.375Z,1516652525.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:05.773Z,1516652525.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:06.184Z,1516652526.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:06.575Z,1516652526.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:06.980Z,1516652526.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:07.396Z,1516652527.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:07.789Z,1516652527.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:08.184Z,1516652528.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:08.582Z,1516652528.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:08.993Z,1516652528.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:09.395Z,1516652529.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:09.791Z,1516652529.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:10.192Z,1516652530.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:10.560Z,1516652530.560 [PNI_TCM](ERROR): CRC does not match. Expected:0x30036 got:0x13596
2018-01-22T20:22:10.593Z,1516652530.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:10.996Z,1516652530.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:11.191Z,1516652531.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:11.393Z,1516652531.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:11.789Z,1516652531.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:11.989Z,1516652531.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:12.194Z,1516652532.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:12.399Z,1516652532.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:12.595Z,1516652532.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:12.997Z,1516652532.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:16.390Z,1516652536.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:16.540Z,1516652536.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:16.856Z,1516652536.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:17.259Z,1516652537.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:17.700Z,1516652537.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:18.076Z,1516652538.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:18.472Z,1516652538.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:18.868Z,1516652538.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:19.263Z,1516652539.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:19.690Z,1516652539.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:20.082Z,1516652540.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:20.455Z,1516652540.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:20.904Z,1516652540.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:21.264Z,1516652541.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:21.711Z,1516652541.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:22.066Z,1516652542.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:22.460Z,1516652542.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:22.852Z,1516652542.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:23.253Z,1516652543.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:23.651Z,1516652543.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:24.068Z,1516652544.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:24.500Z,1516652544.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:24.862Z,1516652544.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:25.256Z,1516652545.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:25.652Z,1516652545.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:26.060Z,1516652546.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:26.492Z,1516652546.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:26.771Z,1516652546.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:26.864Z,1516652546.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:27.175Z,1516652547.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:27.268Z,1516652547.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:27.719Z,1516652547.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:28.072Z,1516652548.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:28.464Z,1516652548.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:28.857Z,1516652548.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:29.265Z,1516652549.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:29.714Z,1516652549.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:30.071Z,1516652550.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:30.476Z,1516652550.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:30.866Z,1516652550.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:31.259Z,1516652551.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:31.721Z,1516652551.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:32.060Z,1516652552.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:32.451Z,1516652552.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:32.850Z,1516652552.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:33.272Z,1516652553.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:33.709Z,1516652553.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:34.074Z,1516652554.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:34.463Z,1516652554.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:34.864Z,1516652554.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:35.248Z,1516652555.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:35.648Z,1516652555.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:36.072Z,1516652556.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:36.469Z,1516652556.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:36.865Z,1516652556.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:37.256Z,1516652557.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:37.649Z,1516652557.649 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:22:37.650Z,1516652557.650 [BPC1] Communications Fault, FailCount= 4
2018-01-22T20:22:37.650Z,1516652557.650 [BPC1](ERROR): Communications Fault
2018-01-22T20:22:37.680Z,1516652557.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:37.705Z,1516652557.705 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:22:38.089Z,1516652558.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:38.460Z,1516652558.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:38.867Z,1516652558.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:38.880Z,1516652558.880 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:22:38.880Z,1516652558.880 [BPC1] No Fault, FailCount= 4
2018-01-22T20:22:39.243Z,1516652559.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:39.328Z,1516652559.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:39.671Z,1516652559.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:40.039Z,1516652560.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:40.104Z,1516652560.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:40.472Z,1516652560.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:40.491Z,1516652560.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:22:40.868Z,1516652560.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:41.252Z,1516652561.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:41.722Z,1516652561.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:42.078Z,1516652562.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:42.476Z,1516652562.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:42.862Z,1516652562.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:43.250Z,1516652563.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:43.734Z,1516652563.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:44.054Z,1516652564.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:44.462Z,1516652564.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:44.849Z,1516652564.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:45.264Z,1516652565.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:45.721Z,1516652565.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:46.064Z,1516652566.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:46.453Z,1516652566.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:46.852Z,1516652566.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:47.262Z,1516652567.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:47.727Z,1516652567.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:48.072Z,1516652568.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:48.468Z,1516652568.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:48.864Z,1516652568.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:49.254Z,1516652569.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:49.659Z,1516652569.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:50.071Z,1516652570.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:50.447Z,1516652570.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:50.852Z,1516652570.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:51.274Z,1516652571.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:51.672Z,1516652571.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:52.109Z,1516652572.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:52.452Z,1516652572.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:52.850Z,1516652572.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:53.252Z,1516652573.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:53.650Z,1516652573.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:54.116Z,1516652574.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:54.483Z,1516652574.483 [BPC1](INFO): Initialized
2018-01-22T20:22:54.507Z,1516652574.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:54.865Z,1516652574.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:55.255Z,1516652575.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:55.720Z,1516652575.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:56.058Z,1516652576.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:56.461Z,1516652576.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:56.858Z,1516652576.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:57.254Z,1516652577.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:57.710Z,1516652577.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:58.064Z,1516652578.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:58.468Z,1516652578.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:58.862Z,1516652578.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:59.271Z,1516652579.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:22:59.658Z,1516652579.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:00.070Z,1516652580.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:00.484Z,1516652580.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:00.868Z,1516652580.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:01.266Z,1516652581.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:01.717Z,1516652581.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:02.083Z,1516652582.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:02.480Z,1516652582.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:02.879Z,1516652582.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:03.256Z,1516652583.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:03.652Z,1516652583.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:04.091Z,1516652584.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:04.461Z,1516652584.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:04.880Z,1516652584.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:05.250Z,1516652585.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:05.651Z,1516652585.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:06.117Z,1516652586.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:06.463Z,1516652586.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:06.860Z,1516652586.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:07.256Z,1516652587.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:07.257Z,1516652587.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:07.652Z,1516652587.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:08.061Z,1516652588.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:08.125Z,1516652588.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:08.470Z,1516652588.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:08.495Z,1516652588.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:08.874Z,1516652588.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:09.252Z,1516652589.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:09.291Z,1516652589.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:09.652Z,1516652589.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:10.060Z,1516652590.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:10.087Z,1516652590.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:10.462Z,1516652590.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:10.491Z,1516652590.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:10.872Z,1516652590.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:11.258Z,1516652591.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:11.655Z,1516652591.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:12.064Z,1516652592.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:12.479Z,1516652592.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:12.868Z,1516652592.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:13.259Z,1516652593.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:16.585Z,1516652596.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:16.718Z,1516652596.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:17.099Z,1516652597.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:17.493Z,1516652597.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:17.888Z,1516652597.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:18.292Z,1516652598.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:18.692Z,1516652598.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:19.093Z,1516652599.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:19.494Z,1516652599.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:19.897Z,1516652599.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:20.300Z,1516652600.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:20.691Z,1516652600.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:21.082Z,1516652601.082 [PNI_TCM](ERROR): CRC does not match. Expected:0x40279 got:0x61320
2018-01-22T20:23:21.101Z,1516652601.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:21.273Z,1516652601.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:21.501Z,1516652601.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:21.908Z,1516652601.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:22.069Z,1516652602.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:22.279Z,1516652602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:22.475Z,1516652602.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:22.682Z,1516652602.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:23.106Z,1516652603.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:23.272Z,1516652603.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:23.504Z,1516652603.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:23.905Z,1516652603.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:24.067Z,1516652604.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:24.288Z,1516652604.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:24.471Z,1516652604.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:24.690Z,1516652604.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:25.094Z,1516652605.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:25.495Z,1516652605.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:25.918Z,1516652605.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:26.311Z,1516652606.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:26.688Z,1516652606.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:27.092Z,1516652607.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:27.497Z,1516652607.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:27.925Z,1516652607.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:28.304Z,1516652608.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:28.685Z,1516652608.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:29.094Z,1516652609.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:29.524Z,1516652609.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:29.900Z,1516652609.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:30.285Z,1516652610.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:30.690Z,1516652610.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:31.096Z,1516652611.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:31.503Z,1516652611.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:31.899Z,1516652611.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:32.292Z,1516652612.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:32.692Z,1516652612.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:33.107Z,1516652613.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:33.500Z,1516652613.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:33.899Z,1516652613.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:34.291Z,1516652614.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:34.679Z,1516652614.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:35.083Z,1516652615.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:35.291Z,1516652615.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:35.492Z,1516652615.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:35.888Z,1516652615.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:36.089Z,1516652616.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:36.284Z,1516652616.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:36.495Z,1516652616.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:36.699Z,1516652616.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:37.094Z,1516652617.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:37.291Z,1516652617.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:37.492Z,1516652617.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:37.896Z,1516652617.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:38.087Z,1516652618.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:38.287Z,1516652618.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:38.491Z,1516652618.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:38.680Z,1516652618.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:39.092Z,1516652619.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:39.489Z,1516652619.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:39.919Z,1516652619.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:40.300Z,1516652620.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:40.680Z,1516652620.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:41.096Z,1516652621.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:41.493Z,1516652621.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:41.896Z,1516652621.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:42.280Z,1516652622.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:42.688Z,1516652622.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:43.097Z,1516652623.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:43.500Z,1516652623.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:43.896Z,1516652623.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:44.280Z,1516652624.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:44.679Z,1516652624.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:45.096Z,1516652625.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:45.492Z,1516652625.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:45.896Z,1516652625.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:46.284Z,1516652626.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:46.675Z,1516652626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:47.089Z,1516652627.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:47.492Z,1516652627.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:47.885Z,1516652627.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:48.286Z,1516652628.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:48.688Z,1516652628.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:49.084Z,1516652629.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:49.316Z,1516652629.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:49.494Z,1516652629.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:49.903Z,1516652629.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:50.113Z,1516652630.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:50.285Z,1516652630.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:50.519Z,1516652630.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:50.685Z,1516652630.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:51.092Z,1516652631.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:51.315Z,1516652631.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:51.492Z,1516652631.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:51.900Z,1516652631.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:52.111Z,1516652632.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:52.300Z,1516652632.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:52.515Z,1516652632.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:23:52.686Z,1516652632.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:53.090Z,1516652633.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:53.491Z,1516652633.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:53.889Z,1516652633.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:54.280Z,1516652634.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:54.684Z,1516652634.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:55.072Z,1516652635.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:55.498Z,1516652635.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:55.905Z,1516652635.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:56.286Z,1516652636.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:56.680Z,1516652636.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:57.084Z,1516652637.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:57.484Z,1516652637.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:57.884Z,1516652637.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:58.282Z,1516652638.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:58.681Z,1516652638.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:59.085Z,1516652639.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:59.479Z,1516652639.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:23:59.933Z,1516652639.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:00.288Z,1516652640.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:00.692Z,1516652640.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:01.084Z,1516652641.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:01.498Z,1516652641.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:01.908Z,1516652641.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:02.293Z,1516652642.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:02.672Z,1516652642.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:03.099Z,1516652643.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:03.347Z,1516652643.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:03.472Z,1516652643.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:03.876Z,1516652643.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:04.145Z,1516652644.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:04.282Z,1516652644.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:04.551Z,1516652644.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:04.685Z,1516652644.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:05.081Z,1516652645.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:05.347Z,1516652645.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:05.474Z,1516652645.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:05.881Z,1516652645.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:06.145Z,1516652646.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:06.284Z,1516652646.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:06.551Z,1516652646.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:06.688Z,1516652646.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:07.077Z,1516652647.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:07.481Z,1516652647.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:07.888Z,1516652647.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:08.282Z,1516652648.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:08.688Z,1516652648.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:09.082Z,1516652649.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:09.475Z,1516652649.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:09.885Z,1516652649.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:10.289Z,1516652650.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:10.688Z,1516652650.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:11.088Z,1516652651.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:11.480Z,1516652651.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:11.892Z,1516652651.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:12.288Z,1516652652.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:12.692Z,1516652652.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:13.085Z,1516652653.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:13.493Z,1516652653.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:16.826Z,1516652656.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:16.972Z,1516652656.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:17.299Z,1516652657.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:17.360Z,1516652657.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:17.696Z,1516652657.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:18.092Z,1516652658.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:18.157Z,1516652658.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:18.513Z,1516652658.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:18.571Z,1516652658.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:24:18.917Z,1516652658.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:19.310Z,1516652659.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:19.702Z,1516652659.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:20.104Z,1516652660.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:20.489Z,1516652660.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:20.891Z,1516652660.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:21.308Z,1516652661.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:21.709Z,1516652661.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:22.110Z,1516652662.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:22.508Z,1516652662.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:22.889Z,1516652662.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:23.288Z,1516652663.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:23.687Z,1516652663.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:24.088Z,1516652664.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:24.510Z,1516652664.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:24.916Z,1516652664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:25.298Z,1516652665.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:25.688Z,1516652665.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:26.100Z,1516652666.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:26.491Z,1516652666.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:26.900Z,1516652666.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:27.304Z,1516652667.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:27.704Z,1516652667.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:28.102Z,1516652668.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:28.494Z,1516652668.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:28.887Z,1516652668.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:29.288Z,1516652669.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:29.698Z,1516652669.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:29.699Z,1516652669.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-01-22T20:24:29.699Z,1516652669.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:24:29.700Z,1516652669.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:29.701Z,1516652669.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-01-22T20:24:29.701Z,1516652669.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:24:29.703Z,1516652669.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:29.703Z,1516652669.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-01-22T20:24:29.703Z,1516652669.703 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:24:29.726Z,1516652669.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:24:29.726Z,1516652669.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:24:29.726Z,1516652669.726 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:24:30.100Z,1516652670.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:24:30.100Z,1516652670.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-01-22T20:24:30.100Z,1516652670.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:24:30.100Z,1516652670.100 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-01-22T20:24:30.101Z,1516652670.101 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:24:30.101Z,1516652670.101 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-01-22T20:24:30.508Z,1516652670.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:24:30.509Z,1516652670.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:24:30.509Z,1516652670.509 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:24:30.509Z,1516652670.509 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:24:30.510Z,1516652670.510 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:24:30.510Z,1516652670.510 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:24:30.511Z,1516652670.511 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:24:30.511Z,1516652670.511 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:24:30.511Z,1516652670.511 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:24:30.933Z,1516652670.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:31.293Z,1516652671.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:31.686Z,1516652671.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:32.086Z,1516652672.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:32.488Z,1516652672.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:32.888Z,1516652672.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:33.298Z,1516652673.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:33.697Z,1516652673.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:34.121Z,1516652674.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:34.496Z,1516652674.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:34.892Z,1516652674.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:35.292Z,1516652675.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:35.703Z,1516652675.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:36.096Z,1516652676.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:36.512Z,1516652676.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:36.910Z,1516652676.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:37.303Z,1516652677.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:37.696Z,1516652677.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:38.112Z,1516652678.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:38.493Z,1516652678.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:38.907Z,1516652678.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:39.308Z,1516652679.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:39.704Z,1516652679.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:40.109Z,1516652680.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:40.504Z,1516652680.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:40.888Z,1516652680.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:41.286Z,1516652681.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:41.688Z,1516652681.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:42.089Z,1516652682.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:42.494Z,1516652682.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:42.898Z,1516652682.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:43.294Z,1516652683.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:43.688Z,1516652683.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:44.103Z,1516652684.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:44.491Z,1516652684.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:44.890Z,1516652684.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:45.311Z,1516652685.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:45.704Z,1516652685.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:46.239Z,1516652686.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:46.504Z,1516652686.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:46.888Z,1516652686.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:47.288Z,1516652687.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:47.684Z,1516652687.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:48.111Z,1516652688.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:48.494Z,1516652688.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:48.898Z,1516652688.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:49.297Z,1516652689.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:49.686Z,1516652689.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:50.100Z,1516652690.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:50.492Z,1516652690.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:50.887Z,1516652690.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:51.302Z,1516652691.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:51.704Z,1516652691.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:52.094Z,1516652692.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:52.496Z,1516652692.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:52.890Z,1516652692.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:53.290Z,1516652693.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:53.704Z,1516652693.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:54.090Z,1516652694.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:54.512Z,1516652694.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:54.905Z,1516652694.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:55.300Z,1516652695.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:55.696Z,1516652695.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:56.094Z,1516652696.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:56.497Z,1516652696.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:56.893Z,1516652696.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:57.314Z,1516652697.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:57.706Z,1516652697.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:58.112Z,1516652698.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:58.496Z,1516652698.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:58.900Z,1516652698.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:59.304Z,1516652699.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:24:59.696Z,1516652699.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:00.092Z,1516652700.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:00.516Z,1516652700.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:00.906Z,1516652700.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:01.302Z,1516652701.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:01.691Z,1516652701.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:02.093Z,1516652702.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:02.496Z,1516652702.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:02.891Z,1516652702.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:03.316Z,1516652703.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:03.705Z,1516652703.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:04.113Z,1516652704.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:04.497Z,1516652704.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:04.891Z,1516652704.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:05.290Z,1516652705.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:05.707Z,1516652705.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:06.091Z,1516652706.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:06.508Z,1516652706.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:06.904Z,1516652706.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:07.307Z,1516652707.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:07.695Z,1516652707.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:08.104Z,1516652708.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:08.492Z,1516652708.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:08.895Z,1516652708.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:09.305Z,1516652709.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:09.716Z,1516652709.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:10.100Z,1516652710.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:10.504Z,1516652710.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:10.900Z,1516652710.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:11.295Z,1516652711.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:11.699Z,1516652711.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:12.094Z,1516652712.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:12.504Z,1516652712.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:12.908Z,1516652712.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:12.912Z,1516652712.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:25:12.912Z,1516652712.912 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:25:12.912Z,1516652712.912 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:25:12.912Z,1516652712.912 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:25:13.305Z,1516652713.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:13.309Z,1516652713.309 [Default:CheckIn:D] Stopped
2018-01-22T20:25:13.309Z,1516652713.309 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:25:13.699Z,1516652713.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:13.703Z,1516652713.703 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.810335 min 
2018-01-22T20:25:13.703Z,1516652713.703 [Default:CheckIn:E] Stopped
2018-01-22T20:25:13.703Z,1516652713.703 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:25:13.703Z,1516652713.703 [Default:CheckIn] Stopped
2018-01-22T20:25:13.703Z,1516652713.703 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:25:13.704Z,1516652713.704 [Default:CheckIn](INFO): Running loop #13
2018-01-22T20:25:13.704Z,1516652713.704 [Default:CheckIn] Running Loop=13
2018-01-22T20:25:13.704Z,1516652713.704 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:25:13.704Z,1516652713.704 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:25:17.098Z,1516652717.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:17.244Z,1516652717.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:17.574Z,1516652717.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:18.012Z,1516652718.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:18.376Z,1516652718.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:18.764Z,1516652718.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:19.167Z,1516652719.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:19.570Z,1516652719.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:20.002Z,1516652720.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:20.371Z,1516652720.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:20.790Z,1516652720.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:21.183Z,1516652721.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:21.569Z,1516652721.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:21.993Z,1516652721.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:22.366Z,1516652722.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:22.770Z,1516652722.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:23.168Z,1516652723.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:23.580Z,1516652723.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:24.048Z,1516652724.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:24.387Z,1516652724.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:24.760Z,1516652724.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:25.165Z,1516652725.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:25.564Z,1516652725.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:25.973Z,1516652725.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:26.381Z,1516652726.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:26.776Z,1516652726.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:27.176Z,1516652727.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:27.567Z,1516652727.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:27.967Z,1516652727.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:28.366Z,1516652728.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:28.768Z,1516652728.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:29.168Z,1516652729.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:29.576Z,1516652729.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:30.013Z,1516652730.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:30.377Z,1516652730.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:30.767Z,1516652730.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:31.175Z,1516652731.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:31.565Z,1516652731.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:32.017Z,1516652732.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:32.382Z,1516652732.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:32.774Z,1516652732.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:33.170Z,1516652733.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:33.564Z,1516652733.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:34.004Z,1516652734.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:34.376Z,1516652734.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:34.776Z,1516652734.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:35.164Z,1516652735.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:35.577Z,1516652735.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:36.023Z,1516652736.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:36.380Z,1516652736.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:36.777Z,1516652736.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:37.180Z,1516652737.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:37.556Z,1516652737.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:37.956Z,1516652737.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:38.387Z,1516652738.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:38.785Z,1516652738.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:39.170Z,1516652739.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:39.560Z,1516652739.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:39.968Z,1516652739.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:40.381Z,1516652740.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:40.768Z,1516652740.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:41.162Z,1516652741.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:41.570Z,1516652741.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:41.970Z,1516652741.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:42.388Z,1516652742.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:42.765Z,1516652742.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:43.167Z,1516652743.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:43.568Z,1516652743.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:44.041Z,1516652744.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:44.392Z,1516652744.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:44.777Z,1516652744.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:45.188Z,1516652745.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:45.569Z,1516652745.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:46.037Z,1516652746.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:46.369Z,1516652746.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:46.772Z,1516652746.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:47.167Z,1516652747.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:47.576Z,1516652747.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:48.042Z,1516652748.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:48.076Z,1516652748.076 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:25:48.374Z,1516652748.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:48.763Z,1516652748.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:49.170Z,1516652749.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:49.568Z,1516652749.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:50.021Z,1516652750.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:50.390Z,1516652750.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:50.784Z,1516652750.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:51.177Z,1516652751.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:51.576Z,1516652751.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:51.968Z,1516652751.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:52.372Z,1516652752.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:52.757Z,1516652752.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:53.156Z,1516652753.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:53.579Z,1516652753.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:53.992Z,1516652753.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:54.400Z,1516652754.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:54.764Z,1516652754.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:55.168Z,1516652755.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:55.569Z,1516652755.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:55.962Z,1516652755.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:56.407Z,1516652756.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:56.777Z,1516652756.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:57.176Z,1516652757.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:57.568Z,1516652757.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:58.028Z,1516652758.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:58.363Z,1516652758.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:58.776Z,1516652758.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:59.164Z,1516652759.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:25:59.570Z,1516652759.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:00.042Z,1516652760.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:00.390Z,1516652760.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:00.757Z,1516652760.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:01.158Z,1516652761.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:01.558Z,1516652761.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:02.039Z,1516652762.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:02.384Z,1516652762.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:02.776Z,1516652762.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:03.176Z,1516652763.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:03.569Z,1516652763.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:04.029Z,1516652764.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:04.356Z,1516652764.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:04.784Z,1516652764.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:05.156Z,1516652765.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:05.582Z,1516652765.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:06.009Z,1516652766.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:06.370Z,1516652766.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:06.763Z,1516652766.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:07.164Z,1516652767.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:07.567Z,1516652767.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:07.965Z,1516652767.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:08.404Z,1516652768.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:08.781Z,1516652768.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:09.177Z,1516652769.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:09.584Z,1516652769.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:09.968Z,1516652769.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:10.423Z,1516652770.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:10.757Z,1516652770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:11.156Z,1516652771.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:11.580Z,1516652771.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:12.047Z,1516652772.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:12.372Z,1516652772.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:12.767Z,1516652772.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:13.176Z,1516652773.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:13.568Z,1516652773.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:14.039Z,1516652774.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:17.292Z,1516652777.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:17.416Z,1516652777.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:17.800Z,1516652777.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:18.197Z,1516652778.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:18.600Z,1516652778.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:18.987Z,1516652778.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:19.401Z,1516652779.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:19.804Z,1516652779.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:20.200Z,1516652780.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:20.592Z,1516652780.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:20.996Z,1516652780.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:21.394Z,1516652781.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:21.797Z,1516652781.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:22.193Z,1516652782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:22.604Z,1516652782.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:23.015Z,1516652783.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:23.401Z,1516652783.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:23.795Z,1516652783.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:24.200Z,1516652784.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:24.600Z,1516652784.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:25.000Z,1516652785.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:25.406Z,1516652785.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:25.808Z,1516652785.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:26.212Z,1516652786.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:26.602Z,1516652786.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:26.991Z,1516652786.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:27.405Z,1516652787.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:27.785Z,1516652787.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x35197 got:0x62983
2018-01-22T20:26:27.809Z,1516652787.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:28.190Z,1516652788.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:28.608Z,1516652788.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:29.007Z,1516652789.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:29.400Z,1516652789.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:29.790Z,1516652789.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:30.195Z,1516652790.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:30.608Z,1516652790.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:30.986Z,1516652790.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x40023 got:0x7361
2018-01-22T20:26:31.017Z,1516652791.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:31.401Z,1516652791.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:31.801Z,1516652791.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:32.212Z,1516652792.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:32.600Z,1516652792.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:32.991Z,1516652792.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:33.390Z,1516652793.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:33.800Z,1516652793.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:34.208Z,1516652794.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:34.602Z,1516652794.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:35.012Z,1516652795.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:35.407Z,1516652795.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:35.800Z,1516652795.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:36.186Z,1516652796.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:36.608Z,1516652796.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:37.006Z,1516652797.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:37.412Z,1516652797.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:37.809Z,1516652797.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:38.211Z,1516652798.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:38.606Z,1516652798.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:38.991Z,1516652798.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:39.413Z,1516652799.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:39.811Z,1516652799.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:40.216Z,1516652800.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:40.589Z,1516652800.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:40.989Z,1516652800.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:41.413Z,1516652801.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:41.814Z,1516652801.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:42.220Z,1516652802.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:42.611Z,1516652802.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:42.988Z,1516652802.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:43.422Z,1516652803.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:43.816Z,1516652803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:44.215Z,1516652804.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:44.593Z,1516652804.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:45.015Z,1516652805.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:45.395Z,1516652805.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:45.817Z,1516652805.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:46.195Z,1516652806.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:46.616Z,1516652806.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:46.991Z,1516652806.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:47.397Z,1516652807.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:47.797Z,1516652807.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:48.223Z,1516652808.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:48.627Z,1516652808.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:49.028Z,1516652809.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:49.401Z,1516652809.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:49.832Z,1516652809.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:50.225Z,1516652810.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:50.643Z,1516652810.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:51.020Z,1516652811.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:51.404Z,1516652811.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:51.826Z,1516652811.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:52.203Z,1516652812.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:52.594Z,1516652812.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:53.005Z,1516652813.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:53.416Z,1516652813.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:53.825Z,1516652813.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:54.224Z,1516652814.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:54.605Z,1516652814.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:55.021Z,1516652815.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:55.444Z,1516652815.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:55.842Z,1516652815.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:56.218Z,1516652816.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:56.623Z,1516652816.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:57.031Z,1516652817.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:57.427Z,1516652817.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:57.840Z,1516652817.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:58.192Z,1516652818.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:58.608Z,1516652818.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:59.006Z,1516652819.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:59.412Z,1516652819.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:26:59.801Z,1516652819.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:00.213Z,1516652820.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:00.589Z,1516652820.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:00.993Z,1516652820.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:01.410Z,1516652821.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:01.816Z,1516652821.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:02.212Z,1516652822.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:02.596Z,1516652822.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:02.996Z,1516652822.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:03.399Z,1516652823.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:03.822Z,1516652823.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:04.205Z,1516652824.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:04.599Z,1516652824.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:05.000Z,1516652825.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:05.398Z,1516652825.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:05.803Z,1516652825.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:06.208Z,1516652826.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:06.597Z,1516652826.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:06.997Z,1516652826.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:07.409Z,1516652827.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:07.802Z,1516652827.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:08.198Z,1516652828.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:08.592Z,1516652828.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:09.000Z,1516652829.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:09.406Z,1516652829.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:09.806Z,1516652829.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:10.190Z,1516652830.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:10.583Z,1516652830.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:10.992Z,1516652830.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:11.390Z,1516652831.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:11.794Z,1516652831.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:12.196Z,1516652832.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:12.592Z,1516652832.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:12.987Z,1516652832.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:13.390Z,1516652833.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:13.799Z,1516652833.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:14.208Z,1516652834.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:17.640Z,1516652837.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:17.800Z,1516652837.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:18.104Z,1516652838.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:18.526Z,1516652838.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:18.908Z,1516652838.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:19.308Z,1516652839.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:19.710Z,1516652839.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:20.118Z,1516652840.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:20.534Z,1516652840.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:20.916Z,1516652840.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:21.307Z,1516652841.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:21.707Z,1516652841.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:22.158Z,1516652842.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:22.518Z,1516652842.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:22.923Z,1516652842.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:23.329Z,1516652843.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:23.717Z,1516652843.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:24.170Z,1516652844.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:24.520Z,1516652844.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:24.907Z,1516652844.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:25.306Z,1516652845.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:25.712Z,1516652845.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:26.167Z,1516652846.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:26.526Z,1516652846.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:26.919Z,1516652846.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:27.317Z,1516652847.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:27.717Z,1516652847.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:28.175Z,1516652848.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:28.523Z,1516652848.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:28.927Z,1516652848.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:29.336Z,1516652849.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:29.712Z,1516652849.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:30.108Z,1516652850.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:30.512Z,1516652850.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:30.512Z,1516652850.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-01-22T20:27:30.512Z,1516652850.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:27:30.514Z,1516652850.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:30.514Z,1516652850.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-01-22T20:27:30.514Z,1516652850.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:27:30.520Z,1516652850.520 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:30.520Z,1516652850.520 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-01-22T20:27:30.520Z,1516652850.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:27:30.549Z,1516652850.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:27:30.549Z,1516652850.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:27:30.549Z,1516652850.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:27:30.932Z,1516652850.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:27:30.932Z,1516652850.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-01-22T20:27:30.933Z,1516652850.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:27:30.933Z,1516652850.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-01-22T20:27:30.933Z,1516652850.933 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:27:30.933Z,1516652850.933 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-01-22T20:27:31.315Z,1516652851.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:27:31.316Z,1516652851.316 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:27:31.316Z,1516652851.316 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:27:31.316Z,1516652851.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:27:31.317Z,1516652851.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:27:31.317Z,1516652851.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:27:31.317Z,1516652851.317 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:27:31.318Z,1516652851.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:27:31.318Z,1516652851.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:27:31.725Z,1516652851.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:32.126Z,1516652852.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:32.541Z,1516652852.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:32.912Z,1516652852.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:33.299Z,1516652853.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:33.704Z,1516652853.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:34.104Z,1516652854.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:34.554Z,1516652854.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:34.938Z,1516652854.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:35.312Z,1516652855.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:35.709Z,1516652855.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:36.175Z,1516652856.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:36.507Z,1516652856.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:36.903Z,1516652856.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:37.303Z,1516652857.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:37.730Z,1516652857.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:38.181Z,1516652858.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:38.518Z,1516652858.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:38.920Z,1516652858.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:39.307Z,1516652859.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:39.719Z,1516652859.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:40.196Z,1516652860.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:40.524Z,1516652860.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:40.924Z,1516652860.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:41.320Z,1516652861.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:41.708Z,1516652861.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:42.168Z,1516652862.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:42.514Z,1516652862.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:42.920Z,1516652862.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:43.304Z,1516652863.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:43.732Z,1516652863.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:44.114Z,1516652864.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:44.531Z,1516652864.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:44.912Z,1516652864.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:45.307Z,1516652865.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:45.717Z,1516652865.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:46.109Z,1516652866.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:46.555Z,1516652866.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:46.920Z,1516652866.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:47.326Z,1516652867.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:47.715Z,1516652867.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:48.116Z,1516652868.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:48.551Z,1516652868.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:48.911Z,1516652868.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:49.306Z,1516652869.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:49.716Z,1516652869.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:50.183Z,1516652870.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:50.516Z,1516652870.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:50.920Z,1516652870.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:51.313Z,1516652871.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:51.713Z,1516652871.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:52.158Z,1516652872.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:52.514Z,1516652872.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:52.915Z,1516652872.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:53.310Z,1516652873.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:53.716Z,1516652873.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:54.106Z,1516652874.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:54.513Z,1516652874.513 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:27:54.513Z,1516652874.513 [BPC1] Communications Fault, FailCount= 5
2018-01-22T20:27:54.513Z,1516652874.513 [BPC1](ERROR): Communications Fault
2018-01-22T20:27:54.529Z,1516652874.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:54.563Z,1516652874.563 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:27:54.915Z,1516652874.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:55.316Z,1516652875.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:55.712Z,1516652875.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:55.736Z,1516652875.736 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:27:55.736Z,1516652875.736 [BPC1] No Fault, FailCount= 5
2018-01-22T20:27:56.232Z,1516652876.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:56.516Z,1516652876.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:56.923Z,1516652876.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:57.313Z,1516652877.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:57.715Z,1516652877.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:58.114Z,1516652878.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:58.516Z,1516652878.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:58.916Z,1516652878.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:59.317Z,1516652879.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:27:59.708Z,1516652879.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:00.105Z,1516652880.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:00.568Z,1516652880.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:00.921Z,1516652880.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:01.326Z,1516652881.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:01.726Z,1516652881.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:02.096Z,1516652882.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:02.596Z,1516652882.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:02.914Z,1516652882.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:03.310Z,1516652883.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:03.707Z,1516652883.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:04.111Z,1516652884.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:04.512Z,1516652884.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:04.920Z,1516652884.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:05.317Z,1516652885.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:05.708Z,1516652885.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:06.110Z,1516652886.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:06.472Z,1516652886.472 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T20:28:06.472Z,1516652886.472 [NAL9602] Data Fault, FailCount= 3
2018-01-22T20:28:06.472Z,1516652886.472 [NAL9602](ERROR): Data Fault
2018-01-22T20:28:06.504Z,1516652886.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:06.517Z,1516652886.517 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T20:28:06.868Z,1516652886.868 [NAL9602](INFO): Powering down
2018-01-22T20:28:06.910Z,1516652886.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:07.313Z,1516652887.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:07.707Z,1516652887.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:07.720Z,1516652887.720 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T20:28:07.720Z,1516652887.720 [NAL9602] No Fault, FailCount= 3
2018-01-22T20:28:08.109Z,1516652888.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:08.514Z,1516652888.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:08.912Z,1516652888.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:09.314Z,1516652889.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:09.715Z,1516652889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:10.119Z,1516652890.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:10.501Z,1516652890.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:10.915Z,1516652890.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:11.319Z,1516652891.319 [BPC1](INFO): Initialized
2018-01-22T20:28:11.325Z,1516652891.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:11.705Z,1516652891.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:12.112Z,1516652892.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:12.512Z,1516652892.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:12.910Z,1516652892.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:13.312Z,1516652893.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:13.713Z,1516652893.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:14.106Z,1516652894.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:14.587Z,1516652894.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:17.729Z,1516652897.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:17.860Z,1516652897.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:18.265Z,1516652898.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:18.637Z,1516652898.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:19.030Z,1516652899.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:19.429Z,1516652899.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:19.825Z,1516652899.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:20.255Z,1516652900.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:20.636Z,1516652900.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:21.042Z,1516652901.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:21.444Z,1516652901.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:21.841Z,1516652901.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:22.289Z,1516652902.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:22.644Z,1516652902.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:23.044Z,1516652903.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:23.428Z,1516652903.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:23.823Z,1516652903.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:24.271Z,1516652904.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:24.636Z,1516652904.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:25.029Z,1516652905.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:25.436Z,1516652905.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:25.829Z,1516652905.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:26.303Z,1516652906.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:26.632Z,1516652906.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:27.043Z,1516652907.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:27.431Z,1516652907.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:27.837Z,1516652907.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:28.232Z,1516652908.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:28.640Z,1516652908.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:29.030Z,1516652909.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:29.438Z,1516652909.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:29.830Z,1516652909.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:30.236Z,1516652910.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:30.637Z,1516652910.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:31.027Z,1516652911.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:31.440Z,1516652911.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:31.822Z,1516652911.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:32.304Z,1516652912.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:32.640Z,1516652912.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:33.028Z,1516652913.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:33.423Z,1516652913.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:33.828Z,1516652913.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:34.296Z,1516652914.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:34.647Z,1516652914.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:35.028Z,1516652915.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:35.422Z,1516652915.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:35.828Z,1516652915.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:36.292Z,1516652916.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:36.636Z,1516652916.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:36.992Z,1516652916.992 [NAL9602](INFO): Powering up NAL9602
2018-01-22T20:28:37.037Z,1516652917.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:37.436Z,1516652917.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:37.847Z,1516652917.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:38.285Z,1516652918.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:38.630Z,1516652918.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:39.040Z,1516652919.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:39.430Z,1516652919.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:39.836Z,1516652919.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:40.289Z,1516652920.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:40.644Z,1516652920.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:41.028Z,1516652921.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:41.422Z,1516652921.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:41.828Z,1516652921.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:42.222Z,1516652922.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:42.653Z,1516652922.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:43.040Z,1516652923.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:43.431Z,1516652923.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:43.763Z,1516652923.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:43.839Z,1516652923.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:44.233Z,1516652924.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:44.561Z,1516652924.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:44.671Z,1516652924.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:44.975Z,1516652924.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:45.032Z,1516652925.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:45.432Z,1516652925.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:45.831Z,1516652925.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:46.284Z,1516652926.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:46.644Z,1516652926.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:47.044Z,1516652927.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:47.428Z,1516652927.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:47.847Z,1516652927.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:48.192Z,1516652928.192 [NAL9602](INFO): NAL9602 initialized
2018-01-22T20:28:48.290Z,1516652928.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:48.640Z,1516652928.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:49.040Z,1516652929.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:49.437Z,1516652929.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:49.844Z,1516652929.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:50.294Z,1516652930.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:50.640Z,1516652930.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:51.033Z,1516652931.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:51.431Z,1516652931.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:51.840Z,1516652931.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:52.303Z,1516652932.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:52.641Z,1516652932.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:53.041Z,1516652933.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:53.443Z,1516652933.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:53.841Z,1516652933.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:54.241Z,1516652934.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:54.659Z,1516652934.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:55.045Z,1516652935.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:55.448Z,1516652935.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:55.848Z,1516652935.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:56.228Z,1516652936.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:56.672Z,1516652936.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:57.040Z,1516652937.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:57.440Z,1516652937.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:57.787Z,1516652937.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:57.842Z,1516652937.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:58.244Z,1516652938.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:58.592Z,1516652938.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:58.670Z,1516652938.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:59.011Z,1516652939.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:28:59.043Z,1516652939.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:59.446Z,1516652939.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:28:59.852Z,1516652939.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:00.300Z,1516652940.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:00.645Z,1516652940.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:01.041Z,1516652941.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:01.441Z,1516652941.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:01.848Z,1516652941.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:02.311Z,1516652942.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:02.641Z,1516652942.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:03.035Z,1516652943.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:03.430Z,1516652943.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:03.848Z,1516652943.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:04.319Z,1516652944.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:04.648Z,1516652944.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:05.039Z,1516652945.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:05.440Z,1516652945.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:05.839Z,1516652945.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:06.254Z,1516652946.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:06.638Z,1516652946.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:07.028Z,1516652947.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:07.433Z,1516652947.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:07.842Z,1516652947.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:08.244Z,1516652948.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:08.658Z,1516652948.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:09.024Z,1516652949.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:09.428Z,1516652949.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:09.824Z,1516652949.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:10.228Z,1516652950.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:10.693Z,1516652950.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:11.037Z,1516652951.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:11.438Z,1516652951.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:11.827Z,1516652951.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:12.231Z,1516652952.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:12.691Z,1516652952.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:13.031Z,1516652953.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:13.431Z,1516652953.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:13.844Z,1516652953.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:14.312Z,1516652954.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:14.645Z,1516652954.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:17.843Z,1516652957.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:18.000Z,1516652958.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:18.348Z,1516652958.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:18.736Z,1516652958.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:19.130Z,1516652959.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:19.502Z,1516652959.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:19.912Z,1516652959.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:20.364Z,1516652960.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:20.734Z,1516652960.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:21.114Z,1516652961.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:21.510Z,1516652961.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:21.912Z,1516652961.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:22.372Z,1516652962.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:22.720Z,1516652962.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:23.115Z,1516652963.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:23.520Z,1516652963.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:23.921Z,1516652963.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:24.326Z,1516652964.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:24.735Z,1516652964.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:25.124Z,1516652965.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:25.519Z,1516652965.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:25.925Z,1516652965.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:26.318Z,1516652966.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:26.726Z,1516652966.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:27.124Z,1516652967.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:27.527Z,1516652967.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:27.925Z,1516652967.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:28.374Z,1516652968.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:28.712Z,1516652968.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:29.113Z,1516652969.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:29.520Z,1516652969.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:29.909Z,1516652969.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:30.372Z,1516652970.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:30.724Z,1516652970.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:31.124Z,1516652971.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:31.524Z,1516652971.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:31.900Z,1516652971.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:32.361Z,1516652972.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:32.708Z,1516652972.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:33.117Z,1516652973.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:33.517Z,1516652973.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:33.913Z,1516652973.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:34.383Z,1516652974.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:34.707Z,1516652974.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:35.110Z,1516652975.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:35.519Z,1516652975.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:35.921Z,1516652975.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:36.366Z,1516652976.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:36.712Z,1516652976.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:37.116Z,1516652977.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:37.504Z,1516652977.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:37.916Z,1516652977.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:38.313Z,1516652978.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:38.749Z,1516652978.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:39.107Z,1516652979.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:39.505Z,1516652979.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:39.852Z,1516652979.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:29:39.912Z,1516652979.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:40.302Z,1516652980.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:40.649Z,1516652980.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:29:40.756Z,1516652980.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:41.071Z,1516652981.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:29:41.121Z,1516652981.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:41.522Z,1516652981.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:41.910Z,1516652981.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:42.366Z,1516652982.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:42.720Z,1516652982.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:43.101Z,1516652983.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:43.503Z,1516652983.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:43.925Z,1516652983.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:44.384Z,1516652984.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:44.731Z,1516652984.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:45.109Z,1516652985.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:45.505Z,1516652985.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:45.905Z,1516652985.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:46.392Z,1516652986.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:46.720Z,1516652986.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:47.113Z,1516652987.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:47.512Z,1516652987.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:47.916Z,1516652987.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:48.373Z,1516652988.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:48.716Z,1516652988.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:49.109Z,1516652989.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:49.511Z,1516652989.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:49.918Z,1516652989.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:50.319Z,1516652990.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:50.736Z,1516652990.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:51.116Z,1516652991.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:51.496Z,1516652991.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:51.901Z,1516652991.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:52.304Z,1516652992.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:52.775Z,1516652992.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:53.121Z,1516652993.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:53.529Z,1516652993.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:53.925Z,1516652993.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:54.306Z,1516652994.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:54.744Z,1516652994.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:55.111Z,1516652995.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:55.505Z,1516652995.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:55.916Z,1516652995.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:56.384Z,1516652996.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:56.716Z,1516652996.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:57.118Z,1516652997.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:57.503Z,1516652997.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:57.916Z,1516652997.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:58.306Z,1516652998.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:58.724Z,1516652998.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:59.125Z,1516652999.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:59.522Z,1516652999.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:29:59.913Z,1516652999.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:00.306Z,1516653000.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:00.710Z,1516653000.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:01.107Z,1516653001.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:01.512Z,1516653001.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:01.916Z,1516653001.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:02.390Z,1516653002.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:02.717Z,1516653002.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:03.116Z,1516653003.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:03.520Z,1516653003.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:03.900Z,1516653003.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:04.304Z,1516653004.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:04.733Z,1516653004.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:05.129Z,1516653005.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:05.534Z,1516653005.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:05.908Z,1516653005.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:06.308Z,1516653006.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:06.786Z,1516653006.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:07.105Z,1516653007.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:07.510Z,1516653007.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:07.914Z,1516653007.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:08.310Z,1516653008.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:08.773Z,1516653008.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:09.107Z,1516653009.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:09.506Z,1516653009.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:09.909Z,1516653009.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:10.314Z,1516653010.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:10.717Z,1516653010.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:11.107Z,1516653011.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:11.515Z,1516653011.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:11.907Z,1516653011.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:12.307Z,1516653012.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:12.717Z,1516653012.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:13.129Z,1516653013.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:13.522Z,1516653013.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:13.932Z,1516653013.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:13.936Z,1516653013.936 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:25:13.7Z
2018-01-22T20:30:13.936Z,1516653013.936 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T20:30:13.936Z,1516653013.936 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T20:30:14.312Z,1516653014.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:15.460Z,1516653015.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:18.748Z,1516653018.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:18.827Z,1516653018.827 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180122T180533/Courier0052.lzma
2018-01-22T20:30:18.892Z,1516653018.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:19.233Z,1516653019.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:19.577Z,1516653019.577 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0052.lzma.bak
2018-01-22T20:30:19.577Z,1516653019.577 [DataOverHttps](INFO): SBD MOMSN=7751547
2018-01-22T20:30:19.632Z,1516653019.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:20.236Z,1516653020.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:20.435Z,1516653020.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:21.920Z,1516653021.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:22.717Z,1516653022.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:23.147Z,1516653023.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:23.688Z,1516653023.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:23.799Z,1516653023.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:23.943Z,1516653023.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:24.178Z,1516653024.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:24.604Z,1516653024.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:24.739Z,1516653024.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:24.996Z,1516653024.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:25.143Z,1516653025.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:25.370Z,1516653025.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:28.705Z,1516653028.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:28.794Z,1516653028.794 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0053.lzma
2018-01-22T20:30:28.852Z,1516653028.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:29.179Z,1516653029.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:29.534Z,1516653029.534 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0053.lzma.bak
2018-01-22T20:30:29.534Z,1516653029.534 [DataOverHttps](INFO): SBD MOMSN=7751549
2018-01-22T20:30:29.617Z,1516653029.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:30.202Z,1516653030.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:30.205Z,1516653030.205 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T20:30:30.205Z,1516653030.205 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T20:30:30.205Z,1516653030.205 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T20:30:30.448Z,1516653030.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:33.633Z,1516653033.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:33.634Z,1516653033.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-01-22T20:30:33.634Z,1516653033.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:30:33.664Z,1516653033.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:33.664Z,1516653033.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-01-22T20:30:33.664Z,1516653033.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:30:33.666Z,1516653033.666 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:33.666Z,1516653033.666 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-01-22T20:30:33.666Z,1516653033.666 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:30:33.681Z,1516653033.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:30:33.681Z,1516653033.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:30:33.682Z,1516653033.682 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:30:33.790Z,1516653033.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:30:33.790Z,1516653033.790 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-01-22T20:30:33.795Z,1516653033.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:30:33.795Z,1516653033.795 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-01-22T20:30:33.795Z,1516653033.795 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:30:33.796Z,1516653033.796 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-01-22T20:30:34.175Z,1516653034.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:30:34.176Z,1516653034.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:30:34.176Z,1516653034.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:30:34.176Z,1516653034.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:30:34.177Z,1516653034.177 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:30:34.177Z,1516653034.177 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:30:34.178Z,1516653034.178 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:30:34.178Z,1516653034.178 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:30:34.178Z,1516653034.178 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:30:34.558Z,1516653034.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:34.956Z,1516653034.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:35.345Z,1516653035.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:35.774Z,1516653035.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:35.947Z,1516653035.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:36.136Z,1516653036.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:36.547Z,1516653036.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:36.746Z,1516653036.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:36.957Z,1516653036.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:37.199Z,1516653037.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:37.369Z,1516653037.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:37.741Z,1516653037.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:37.996Z,1516653037.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:38.150Z,1516653038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:38.544Z,1516653038.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:38.791Z,1516653038.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:38.938Z,1516653038.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:39.195Z,1516653039.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:39.342Z,1516653039.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:39.754Z,1516653039.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:40.156Z,1516653040.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:40.579Z,1516653040.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:40.943Z,1516653040.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:41.355Z,1516653041.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:41.755Z,1516653041.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:42.139Z,1516653042.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:42.541Z,1516653042.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:42.963Z,1516653042.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:43.360Z,1516653043.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:43.760Z,1516653043.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:44.152Z,1516653044.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:44.561Z,1516653044.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:44.954Z,1516653044.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:45.348Z,1516653045.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:45.751Z,1516653045.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:46.163Z,1516653046.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:46.564Z,1516653046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:46.954Z,1516653046.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:47.336Z,1516653047.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:47.736Z,1516653047.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:48.136Z,1516653048.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:48.544Z,1516653048.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:48.981Z,1516653048.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:49.372Z,1516653049.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:49.769Z,1516653049.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:50.138Z,1516653050.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:50.543Z,1516653050.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:50.939Z,1516653050.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:51.347Z,1516653051.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:51.759Z,1516653051.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:51.975Z,1516653051.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:52.150Z,1516653052.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:52.545Z,1516653052.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:52.771Z,1516653052.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:52.936Z,1516653052.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:53.175Z,1516653053.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:30:53.327Z,1516653053.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:53.748Z,1516653053.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:54.141Z,1516653054.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:54.582Z,1516653054.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:54.943Z,1516653054.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:55.368Z,1516653055.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:55.748Z,1516653055.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:56.138Z,1516653056.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:56.537Z,1516653056.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:56.948Z,1516653056.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:57.347Z,1516653057.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:57.749Z,1516653057.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:58.152Z,1516653058.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:58.549Z,1516653058.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:58.939Z,1516653058.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:59.339Z,1516653059.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:30:59.747Z,1516653059.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:00.140Z,1516653060.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:00.559Z,1516653060.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:00.960Z,1516653060.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:01.353Z,1516653061.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:01.751Z,1516653061.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:02.147Z,1516653062.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:02.545Z,1516653062.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:02.945Z,1516653062.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:03.344Z,1516653063.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:03.754Z,1516653063.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:03.975Z,1516653063.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:04.152Z,1516653064.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:04.560Z,1516653064.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:04.773Z,1516653064.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:04.949Z,1516653064.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:05.215Z,1516653065.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:05.349Z,1516653065.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:05.751Z,1516653065.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:06.011Z,1516653066.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:06.149Z,1516653066.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:06.549Z,1516653066.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:06.807Z,1516653066.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:06.963Z,1516653066.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:07.211Z,1516653067.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:07.355Z,1516653067.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:07.751Z,1516653067.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:08.149Z,1516653068.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:08.553Z,1516653068.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:08.932Z,1516653068.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:09.341Z,1516653069.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:09.765Z,1516653069.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:10.146Z,1516653070.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:10.549Z,1516653070.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:10.944Z,1516653070.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:11.336Z,1516653071.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:11.738Z,1516653071.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:12.144Z,1516653072.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:12.537Z,1516653072.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:12.954Z,1516653072.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:13.352Z,1516653073.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:13.747Z,1516653073.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:14.142Z,1516653074.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:14.586Z,1516653074.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:14.948Z,1516653074.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:15.352Z,1516653075.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:15.748Z,1516653075.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:16.153Z,1516653076.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:16.548Z,1516653076.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:16.939Z,1516653076.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:17.339Z,1516653077.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:17.747Z,1516653077.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:17.999Z,1516653077.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:18.140Z,1516653078.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:18.539Z,1516653078.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:18.797Z,1516653078.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:18.956Z,1516653078.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:19.207Z,1516653079.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:19.353Z,1516653079.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:19.749Z,1516653079.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:20.003Z,1516653080.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:20.140Z,1516653080.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:20.550Z,1516653080.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:20.799Z,1516653080.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:20.945Z,1516653080.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:21.203Z,1516653081.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:21.352Z,1516653081.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:21.753Z,1516653081.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:22.158Z,1516653082.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:22.554Z,1516653082.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:22.940Z,1516653082.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:23.356Z,1516653083.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:23.756Z,1516653083.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:24.156Z,1516653084.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:24.557Z,1516653084.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:24.964Z,1516653084.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:25.361Z,1516653085.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:25.746Z,1516653085.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:26.140Z,1516653086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:26.569Z,1516653086.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:26.940Z,1516653086.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:27.340Z,1516653087.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:27.746Z,1516653087.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:28.145Z,1516653088.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:28.617Z,1516653088.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:28.943Z,1516653088.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:29.337Z,1516653089.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:29.766Z,1516653089.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:30.148Z,1516653090.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:30.552Z,1516653090.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:30.964Z,1516653090.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:32.015Z,1516653092.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:32.813Z,1516653092.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:33.227Z,1516653093.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:34.023Z,1516653094.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:34.253Z,1516653094.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:34.397Z,1516653094.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:34.727Z,1516653094.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:34.819Z,1516653094.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:35.136Z,1516653095.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:35.223Z,1516653095.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:35.528Z,1516653095.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:35.929Z,1516653095.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:36.336Z,1516653096.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:36.729Z,1516653096.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:37.128Z,1516653097.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:37.528Z,1516653097.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:37.932Z,1516653097.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:38.316Z,1516653098.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:38.722Z,1516653098.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:39.126Z,1516653099.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:39.526Z,1516653099.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:39.925Z,1516653099.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:40.320Z,1516653100.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:40.728Z,1516653100.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:41.128Z,1516653101.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:41.525Z,1516653101.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:41.924Z,1516653101.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:42.318Z,1516653102.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:42.724Z,1516653102.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:43.127Z,1516653103.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:43.528Z,1516653103.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:43.919Z,1516653103.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:44.326Z,1516653104.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:44.730Z,1516653104.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:45.273Z,1516653105.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:45.524Z,1516653105.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:45.932Z,1516653105.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:46.043Z,1516653106.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:46.318Z,1516653106.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:46.740Z,1516653106.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:46.841Z,1516653106.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:47.132Z,1516653107.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:47.247Z,1516653107.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:47.528Z,1516653107.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:47.920Z,1516653107.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:48.043Z,1516653108.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:48.322Z,1516653108.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:48.739Z,1516653108.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:48.839Z,1516653108.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:49.193Z,1516653109.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:49.251Z,1516653109.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:31:49.553Z,1516653109.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:49.959Z,1516653109.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:50.328Z,1516653110.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:50.745Z,1516653110.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:51.180Z,1516653111.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:51.548Z,1516653111.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:51.945Z,1516653111.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:52.320Z,1516653112.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:52.765Z,1516653112.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:53.140Z,1516653113.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:53.560Z,1516653113.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:53.924Z,1516653113.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:54.326Z,1516653114.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:54.733Z,1516653114.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:55.176Z,1516653115.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:55.576Z,1516653115.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:55.983Z,1516653115.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:56.329Z,1516653116.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:56.741Z,1516653116.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:57.125Z,1516653117.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:57.536Z,1516653117.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:57.964Z,1516653117.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:58.348Z,1516653118.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:58.792Z,1516653118.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:59.174Z,1516653119.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:59.529Z,1516653119.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:31:59.937Z,1516653119.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:00.087Z,1516653120.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:00.312Z,1516653120.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:00.713Z,1516653120.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:00.885Z,1516653120.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:01.143Z,1516653121.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:01.291Z,1516653121.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:01.548Z,1516653121.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:01.940Z,1516653121.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:02.087Z,1516653122.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:02.339Z,1516653122.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:02.741Z,1516653122.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:02.883Z,1516653122.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:03.120Z,1516653123.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:03.287Z,1516653123.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:03.516Z,1516653123.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:03.945Z,1516653123.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:04.348Z,1516653124.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:04.736Z,1516653124.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:05.121Z,1516653125.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:05.525Z,1516653125.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:05.960Z,1516653125.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:06.317Z,1516653126.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:06.727Z,1516653126.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:07.130Z,1516653127.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:07.528Z,1516653127.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:07.919Z,1516653127.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:08.320Z,1516653128.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:08.721Z,1516653128.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:09.128Z,1516653129.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:09.530Z,1516653129.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:09.931Z,1516653129.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:10.392Z,1516653130.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:10.724Z,1516653130.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:11.121Z,1516653131.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:11.535Z,1516653131.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:11.936Z,1516653131.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:12.340Z,1516653132.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:12.740Z,1516653132.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:13.128Z,1516653133.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:13.534Z,1516653133.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:13.926Z,1516653133.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:14.336Z,1516653134.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:14.740Z,1516653134.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:15.144Z,1516653135.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:15.541Z,1516653135.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:15.948Z,1516653135.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:16.091Z,1516653136.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:16.333Z,1516653136.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:16.735Z,1516653136.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:16.887Z,1516653136.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:17.132Z,1516653137.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:17.303Z,1516653137.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:17.516Z,1516653137.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:17.937Z,1516653137.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:18.352Z,1516653138.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:18.745Z,1516653138.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:19.124Z,1516653139.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:19.520Z,1516653139.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:19.943Z,1516653139.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:20.324Z,1516653140.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:20.726Z,1516653140.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:21.152Z,1516653141.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:21.548Z,1516653141.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:21.932Z,1516653141.932 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2018-01-22T20:32:21.954Z,1516653141.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:22.326Z,1516653142.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:22.752Z,1516653142.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:23.155Z,1516653143.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:23.526Z,1516653143.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:23.929Z,1516653143.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:24.336Z,1516653144.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:24.757Z,1516653144.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:25.129Z,1516653145.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:25.535Z,1516653145.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:25.926Z,1516653145.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:26.340Z,1516653146.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:26.730Z,1516653146.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:27.143Z,1516653147.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:27.547Z,1516653147.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:27.948Z,1516653147.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:28.123Z,1516653148.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:28.330Z,1516653148.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:28.726Z,1516653148.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:28.921Z,1516653148.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:29.142Z,1516653149.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:29.327Z,1516653149.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:29.528Z,1516653149.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:29.938Z,1516653149.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:30.123Z,1516653150.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:30.345Z,1516653150.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:30.748Z,1516653150.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:30.921Z,1516653150.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:31.146Z,1516653151.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:31.327Z,1516653151.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:34.397Z,1516653154.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:34.531Z,1516653154.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:34.892Z,1516653154.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:35.293Z,1516653155.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:35.691Z,1516653155.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:36.061Z,1516653156.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:36.464Z,1516653156.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:36.876Z,1516653156.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:37.273Z,1516653157.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:37.675Z,1516653157.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:38.080Z,1516653158.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:38.480Z,1516653158.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:38.878Z,1516653158.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:39.263Z,1516653159.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:39.671Z,1516653159.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:40.066Z,1516653160.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:40.471Z,1516653160.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:40.876Z,1516653160.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:41.289Z,1516653161.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:41.674Z,1516653161.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:42.069Z,1516653162.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:42.155Z,1516653162.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:42.471Z,1516653162.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:42.869Z,1516653162.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:42.955Z,1516653162.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:43.260Z,1516653163.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:43.363Z,1516653163.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:43.660Z,1516653163.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:44.082Z,1516653164.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:44.159Z,1516653164.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:44.469Z,1516653164.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:44.888Z,1516653164.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:44.955Z,1516653164.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:45.267Z,1516653165.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:45.359Z,1516653165.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:32:45.676Z,1516653165.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:46.097Z,1516653166.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:46.455Z,1516653166.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:46.881Z,1516653166.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:47.289Z,1516653167.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:47.681Z,1516653167.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:48.060Z,1516653168.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:48.464Z,1516653168.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:48.888Z,1516653168.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:49.270Z,1516653169.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:49.670Z,1516653169.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:50.061Z,1516653170.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:50.462Z,1516653170.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:50.872Z,1516653170.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:51.272Z,1516653171.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:51.661Z,1516653171.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:52.072Z,1516653172.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:52.475Z,1516653172.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:52.880Z,1516653172.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:53.272Z,1516653173.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:53.672Z,1516653173.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:54.068Z,1516653174.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:54.467Z,1516653174.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:54.882Z,1516653174.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:55.288Z,1516653175.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:55.692Z,1516653175.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:56.082Z,1516653176.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:56.484Z,1516653176.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:56.896Z,1516653176.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:57.300Z,1516653177.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:57.700Z,1516653177.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:58.072Z,1516653178.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:58.470Z,1516653178.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:58.877Z,1516653178.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:59.277Z,1516653179.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:32:59.682Z,1516653179.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:00.082Z,1516653180.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:00.462Z,1516653180.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:00.886Z,1516653180.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:01.292Z,1516653181.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:01.702Z,1516653181.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:02.073Z,1516653182.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:02.469Z,1516653182.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:02.884Z,1516653182.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:03.304Z,1516653183.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:03.673Z,1516653183.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:04.068Z,1516653184.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:04.461Z,1516653184.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:04.909Z,1516653184.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:05.279Z,1516653185.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:05.672Z,1516653185.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:06.072Z,1516653186.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:06.471Z,1516653186.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:06.881Z,1516653186.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:07.284Z,1516653187.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:07.685Z,1516653187.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:08.073Z,1516653188.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:08.468Z,1516653188.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:08.884Z,1516653188.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:09.286Z,1516653189.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:09.679Z,1516653189.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:10.065Z,1516653190.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:10.460Z,1516653190.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:10.871Z,1516653190.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:11.295Z,1516653191.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:11.661Z,1516653191.661 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:33:11.661Z,1516653191.661 [BPC1] Communications Fault, FailCount= 6
2018-01-22T20:33:11.661Z,1516653191.661 [BPC1](ERROR): Communications Fault
2018-01-22T20:33:11.669Z,1516653191.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:11.699Z,1516653191.699 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:33:12.068Z,1516653192.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:12.472Z,1516653192.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:12.876Z,1516653192.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:12.906Z,1516653192.906 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:33:12.906Z,1516653192.906 [BPC1] No Fault, FailCount= 6
2018-01-22T20:33:13.336Z,1516653193.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:13.673Z,1516653193.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:14.073Z,1516653194.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:14.468Z,1516653194.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:14.880Z,1516653194.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:15.274Z,1516653195.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:15.676Z,1516653195.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:16.068Z,1516653196.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:16.459Z,1516653196.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:16.880Z,1516653196.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:17.280Z,1516653197.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:17.672Z,1516653197.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:18.072Z,1516653198.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:18.462Z,1516653198.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:18.872Z,1516653198.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:19.278Z,1516653199.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:19.673Z,1516653199.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:20.072Z,1516653200.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:20.461Z,1516653200.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:20.873Z,1516653200.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:21.274Z,1516653201.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:21.671Z,1516653201.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:22.068Z,1516653202.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:22.465Z,1516653202.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:22.871Z,1516653202.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:23.288Z,1516653203.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:23.674Z,1516653203.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:24.080Z,1516653204.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:24.460Z,1516653204.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:24.862Z,1516653204.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:25.285Z,1516653205.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:25.686Z,1516653205.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:26.060Z,1516653206.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:26.463Z,1516653206.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:26.893Z,1516653206.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:27.266Z,1516653207.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:27.669Z,1516653207.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:28.064Z,1516653208.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:28.479Z,1516653208.479 [BPC1](INFO): Initialized
2018-01-22T20:33:28.496Z,1516653208.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:28.887Z,1516653208.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:29.294Z,1516653209.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:29.666Z,1516653209.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:30.062Z,1516653210.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:30.478Z,1516653210.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:30.867Z,1516653210.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:31.280Z,1516653211.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:34.528Z,1516653214.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:34.528Z,1516653214.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-01-22T20:33:34.528Z,1516653214.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:33:34.530Z,1516653214.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:34.530Z,1516653214.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-01-22T20:33:34.530Z,1516653214.530 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:33:34.532Z,1516653214.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:34.532Z,1516653214.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-01-22T20:33:34.532Z,1516653214.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:33:34.581Z,1516653214.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:33:34.582Z,1516653214.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:33:34.582Z,1516653214.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:33:34.735Z,1516653214.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:33:34.735Z,1516653214.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-01-22T20:33:34.736Z,1516653214.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:33:34.737Z,1516653214.737 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-01-22T20:33:34.738Z,1516653214.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:33:34.738Z,1516653214.738 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-01-22T20:33:35.055Z,1516653215.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:33:35.055Z,1516653215.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:33:35.056Z,1516653215.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:33:35.056Z,1516653215.056 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:33:35.056Z,1516653215.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:33:35.057Z,1516653215.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:33:35.057Z,1516653215.057 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:33:35.058Z,1516653215.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:33:35.058Z,1516653215.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:33:35.447Z,1516653215.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:35.840Z,1516653215.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:36.250Z,1516653216.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:36.652Z,1516653216.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:37.105Z,1516653217.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:37.439Z,1516653217.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:37.848Z,1516653217.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:38.236Z,1516653218.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:38.639Z,1516653218.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:39.116Z,1516653219.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:39.453Z,1516653219.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:39.856Z,1516653219.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:40.256Z,1516653220.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:40.631Z,1516653220.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:41.041Z,1516653221.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:41.444Z,1516653221.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:41.837Z,1516653221.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:42.243Z,1516653222.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:42.714Z,1516653222.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:43.045Z,1516653223.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:43.436Z,1516653223.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:43.848Z,1516653223.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:44.240Z,1516653224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:44.636Z,1516653224.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:45.051Z,1516653225.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:45.456Z,1516653225.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:45.848Z,1516653225.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:46.251Z,1516653226.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:46.639Z,1516653226.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:47.060Z,1516653227.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:47.448Z,1516653227.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:47.852Z,1516653227.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:48.258Z,1516653228.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:48.658Z,1516653228.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:49.060Z,1516653229.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:49.440Z,1516653229.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:49.840Z,1516653229.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:50.244Z,1516653230.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:50.640Z,1516653230.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:51.105Z,1516653231.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:51.449Z,1516653231.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:51.849Z,1516653231.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:52.256Z,1516653232.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:52.639Z,1516653232.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:53.101Z,1516653233.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:53.457Z,1516653233.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:53.834Z,1516653233.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:54.261Z,1516653234.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:54.658Z,1516653234.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:55.055Z,1516653235.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:55.448Z,1516653235.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:55.844Z,1516653235.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:56.237Z,1516653236.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:56.638Z,1516653236.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:57.050Z,1516653237.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:57.448Z,1516653237.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:57.852Z,1516653237.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:58.242Z,1516653238.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:58.637Z,1516653238.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:59.047Z,1516653239.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:59.451Z,1516653239.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:33:59.827Z,1516653239.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:00.251Z,1516653240.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:00.664Z,1516653240.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:01.053Z,1516653241.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:01.443Z,1516653241.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:01.838Z,1516653241.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:02.243Z,1516653242.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:02.644Z,1516653242.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:03.069Z,1516653243.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:03.445Z,1516653243.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:03.846Z,1516653243.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:04.240Z,1516653244.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:04.643Z,1516653244.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:05.113Z,1516653245.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:05.441Z,1516653245.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:05.850Z,1516653245.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:06.247Z,1516653246.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:06.645Z,1516653246.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:07.111Z,1516653247.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:07.440Z,1516653247.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:07.852Z,1516653247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:08.236Z,1516653248.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:08.638Z,1516653248.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:09.048Z,1516653249.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:09.453Z,1516653249.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:09.850Z,1516653249.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:10.243Z,1516653250.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:10.644Z,1516653250.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:11.047Z,1516653251.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:11.447Z,1516653251.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:11.852Z,1516653251.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:12.248Z,1516653252.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:12.656Z,1516653252.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:13.049Z,1516653253.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:13.444Z,1516653253.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:13.851Z,1516653253.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:14.244Z,1516653254.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:14.656Z,1516653254.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:15.060Z,1516653255.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:15.453Z,1516653255.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:15.861Z,1516653255.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:16.232Z,1516653256.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:16.636Z,1516653256.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:17.036Z,1516653257.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:17.462Z,1516653257.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:17.836Z,1516653257.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:18.242Z,1516653258.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:18.645Z,1516653258.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:19.046Z,1516653259.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:19.438Z,1516653259.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:19.838Z,1516653259.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:20.239Z,1516653260.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:20.647Z,1516653260.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:21.048Z,1516653261.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:21.452Z,1516653261.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:21.849Z,1516653261.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:22.243Z,1516653262.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:22.643Z,1516653262.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:23.046Z,1516653263.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:23.447Z,1516653263.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:23.839Z,1516653263.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:24.248Z,1516653264.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:24.648Z,1516653264.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:25.064Z,1516653265.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:25.444Z,1516653265.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:25.850Z,1516653265.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:26.240Z,1516653266.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:26.640Z,1516653266.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:27.049Z,1516653267.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:27.452Z,1516653267.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:27.850Z,1516653267.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:28.248Z,1516653268.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:28.640Z,1516653268.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:29.047Z,1516653269.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:29.456Z,1516653269.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:29.842Z,1516653269.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:30.249Z,1516653270.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:30.656Z,1516653270.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:31.052Z,1516653271.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:31.442Z,1516653271.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:34.674Z,1516653274.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:34.797Z,1516653274.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:35.206Z,1516653275.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:35.584Z,1516653275.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:35.976Z,1516653275.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:36.375Z,1516653276.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:36.833Z,1516653276.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:37.161Z,1516653277.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:37.569Z,1516653277.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:37.964Z,1516653277.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:38.374Z,1516653278.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:38.822Z,1516653278.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:39.204Z,1516653279.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:39.565Z,1516653279.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:39.971Z,1516653279.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:40.366Z,1516653280.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:40.836Z,1516653280.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:41.185Z,1516653281.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:41.587Z,1516653281.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:41.984Z,1516653281.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:42.372Z,1516653282.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:42.820Z,1516653282.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:43.180Z,1516653283.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:43.569Z,1516653283.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:43.956Z,1516653283.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:44.380Z,1516653284.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:44.784Z,1516653284.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:45.184Z,1516653285.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:45.564Z,1516653285.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:45.968Z,1516653285.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:46.365Z,1516653286.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:46.763Z,1516653286.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:47.219Z,1516653287.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:47.578Z,1516653287.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:47.976Z,1516653287.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:48.364Z,1516653288.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:48.770Z,1516653288.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:49.217Z,1516653289.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:49.569Z,1516653289.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:49.980Z,1516653289.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:50.378Z,1516653290.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:50.847Z,1516653290.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:51.188Z,1516653291.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:51.572Z,1516653291.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:51.974Z,1516653291.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:52.372Z,1516653292.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:52.756Z,1516653292.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:53.198Z,1516653293.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:53.596Z,1516653293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:53.980Z,1516653293.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:54.376Z,1516653294.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:54.830Z,1516653294.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:55.183Z,1516653295.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:55.561Z,1516653295.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:55.968Z,1516653295.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:56.371Z,1516653296.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:56.810Z,1516653296.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:57.191Z,1516653297.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:57.572Z,1516653297.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:57.969Z,1516653297.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:58.377Z,1516653298.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:58.769Z,1516653298.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:59.192Z,1516653299.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:59.583Z,1516653299.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:34:59.978Z,1516653299.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:00.380Z,1516653300.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:00.756Z,1516653300.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:01.240Z,1516653301.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:01.564Z,1516653301.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:01.960Z,1516653301.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:02.371Z,1516653302.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:02.770Z,1516653302.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:03.249Z,1516653303.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:03.564Z,1516653303.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:03.966Z,1516653303.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:04.377Z,1516653304.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:04.762Z,1516653304.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:05.183Z,1516653305.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:05.587Z,1516653305.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:05.984Z,1516653305.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:06.373Z,1516653306.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:06.770Z,1516653306.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:07.175Z,1516653307.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:07.560Z,1516653307.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:07.956Z,1516653307.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:08.378Z,1516653308.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:08.847Z,1516653308.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:09.179Z,1516653309.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:09.566Z,1516653309.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:09.968Z,1516653309.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:10.369Z,1516653310.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:10.767Z,1516653310.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:11.184Z,1516653311.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:11.578Z,1516653311.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:11.984Z,1516653311.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:12.375Z,1516653312.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:12.776Z,1516653312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:13.182Z,1516653313.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:13.576Z,1516653313.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:13.957Z,1516653313.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:14.384Z,1516653314.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:14.783Z,1516653314.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:15.229Z,1516653315.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:15.569Z,1516653315.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:15.964Z,1516653315.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:16.368Z,1516653316.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:16.767Z,1516653316.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:17.235Z,1516653317.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:17.588Z,1516653317.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:17.986Z,1516653317.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:18.378Z,1516653318.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:18.781Z,1516653318.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:19.180Z,1516653319.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:19.579Z,1516653319.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:19.957Z,1516653319.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:20.381Z,1516653320.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:20.777Z,1516653320.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:21.181Z,1516653321.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:21.572Z,1516653321.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:21.964Z,1516653321.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:22.380Z,1516653322.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:22.768Z,1516653322.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:23.188Z,1516653323.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:23.582Z,1516653323.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:23.976Z,1516653323.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:24.372Z,1516653324.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:24.770Z,1516653324.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:25.181Z,1516653325.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:25.560Z,1516653325.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:25.956Z,1516653325.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:26.382Z,1516653326.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:26.785Z,1516653326.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:27.208Z,1516653327.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:27.565Z,1516653327.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:27.966Z,1516653327.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:28.365Z,1516653328.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:28.773Z,1516653328.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:29.231Z,1516653329.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:29.577Z,1516653329.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:29.978Z,1516653329.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:30.372Z,1516653330.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:30.768Z,1516653330.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:30.771Z,1516653330.771 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:35:30.771Z,1516653330.771 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:35:30.771Z,1516653330.771 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:35:30.771Z,1516653330.771 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:35:31.229Z,1516653331.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:31.240Z,1516653331.240 [Default:CheckIn:D] Stopped
2018-01-22T20:35:31.241Z,1516653331.241 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:35:31.580Z,1516653331.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.109204 min 
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn:E] Stopped
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn] Stopped
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn](INFO): Running loop #14
2018-01-22T20:35:31.588Z,1516653331.588 [Default:CheckIn] Running Loop=14
2018-01-22T20:35:31.589Z,1516653331.589 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:35:31.589Z,1516653331.589 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:35:34.892Z,1516653334.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:35.011Z,1516653335.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:35.430Z,1516653335.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:35.815Z,1516653335.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:36.201Z,1516653336.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:36.608Z,1516653336.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:37.012Z,1516653337.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:37.418Z,1516653337.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:37.816Z,1516653337.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:38.224Z,1516653338.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:38.588Z,1516653338.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:38.992Z,1516653338.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:39.400Z,1516653339.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:39.791Z,1516653339.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:40.202Z,1516653340.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:40.608Z,1516653340.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:41.001Z,1516653341.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:41.408Z,1516653341.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:41.805Z,1516653341.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:42.194Z,1516653342.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:42.602Z,1516653342.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:42.994Z,1516653342.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:43.408Z,1516653343.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:43.808Z,1516653343.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:44.211Z,1516653344.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:44.594Z,1516653344.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:44.993Z,1516653344.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:45.403Z,1516653345.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:45.803Z,1516653345.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:46.203Z,1516653346.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:46.608Z,1516653346.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:47.012Z,1516653347.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:47.390Z,1516653347.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:47.804Z,1516653347.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:48.195Z,1516653348.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:48.208Z,1516653348.208 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:35:48.595Z,1516653348.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:48.998Z,1516653348.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:49.424Z,1516653349.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:49.816Z,1516653349.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:50.205Z,1516653350.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:50.619Z,1516653350.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:51.014Z,1516653351.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:51.408Z,1516653351.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:51.434Z,1516653351.434 [CBIT](INFO): Clearing failed state for component DropWeight
2018-01-22T20:35:51.434Z,1516653351.434 [DropWeight] No Fault, FailCount= 1
2018-01-22T20:35:51.808Z,1516653351.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:52.216Z,1516653352.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:52.632Z,1516653352.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:53.016Z,1516653353.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:53.404Z,1516653353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:53.812Z,1516653353.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:54.196Z,1516653354.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:54.596Z,1516653354.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:55.030Z,1516653355.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:55.418Z,1516653355.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:55.832Z,1516653355.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:56.201Z,1516653356.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:56.595Z,1516653356.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:57.003Z,1516653357.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:57.401Z,1516653357.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:57.802Z,1516653357.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:58.202Z,1516653358.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:58.602Z,1516653358.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:59.003Z,1516653359.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:59.404Z,1516653359.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:35:59.799Z,1516653359.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:00.200Z,1516653360.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:00.600Z,1516653360.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:00.000Z,1516653361.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:01.402Z,1516653361.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:01.801Z,1516653361.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:02.202Z,1516653362.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:02.603Z,1516653362.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:02.000Z,1516653363.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:03.402Z,1516653363.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:03.795Z,1516653363.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:04.202Z,1516653364.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:04.601Z,1516653364.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:04.999Z,1516653364.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:05.404Z,1516653365.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:05.799Z,1516653365.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:06.204Z,1516653366.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:06.596Z,1516653366.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:06.000Z,1516653367.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:07.412Z,1516653367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:07.812Z,1516653367.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:08.209Z,1516653368.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:08.596Z,1516653368.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:09.041Z,1516653369.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:09.408Z,1516653369.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:09.804Z,1516653369.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:10.209Z,1516653370.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:10.610Z,1516653370.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:11.010Z,1516653371.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:11.408Z,1516653371.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:11.808Z,1516653371.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:12.205Z,1516653372.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:12.605Z,1516653372.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:13.010Z,1516653373.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:13.406Z,1516653373.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:13.812Z,1516653373.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:14.213Z,1516653374.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:14.605Z,1516653374.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:15.010Z,1516653375.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:15.396Z,1516653375.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:15.788Z,1516653375.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:16.211Z,1516653376.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:16.622Z,1516653376.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:17.014Z,1516653377.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:17.392Z,1516653377.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:17.789Z,1516653377.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:18.189Z,1516653378.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:18.589Z,1516653378.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:19.022Z,1516653379.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:19.421Z,1516653379.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:19.817Z,1516653379.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:20.228Z,1516653380.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:20.600Z,1516653380.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:21.001Z,1516653381.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:21.396Z,1516653381.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:21.796Z,1516653381.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:22.202Z,1516653382.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:22.606Z,1516653382.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:23.048Z,1516653383.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:23.395Z,1516653383.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:23.801Z,1516653383.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:24.196Z,1516653384.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:24.605Z,1516653384.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:24.999Z,1516653384.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:25.410Z,1516653385.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:25.809Z,1516653385.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:26.215Z,1516653386.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:26.596Z,1516653386.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:27.003Z,1516653387.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:27.405Z,1516653387.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:27.805Z,1516653387.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:28.212Z,1516653388.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:28.616Z,1516653388.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:29.020Z,1516653389.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:29.404Z,1516653389.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:29.801Z,1516653389.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:30.200Z,1516653390.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:30.612Z,1516653390.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:31.024Z,1516653391.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:31.420Z,1516653391.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:31.821Z,1516653391.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:35.142Z,1516653395.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:35.142Z,1516653395.142 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-01-22T20:36:35.142Z,1516653395.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:36:35.144Z,1516653395.144 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:35.144Z,1516653395.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-01-22T20:36:35.144Z,1516653395.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:36:35.146Z,1516653395.146 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:35.146Z,1516653395.146 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-01-22T20:36:35.147Z,1516653395.147 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:36:35.178Z,1516653395.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:36:35.195Z,1516653395.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:36:35.195Z,1516653395.195 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:36:35.314Z,1516653395.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:36:35.319Z,1516653395.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-01-22T20:36:35.319Z,1516653395.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:36:35.319Z,1516653395.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-01-22T20:36:35.320Z,1516653395.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:36:35.320Z,1516653395.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-01-22T20:36:35.647Z,1516653395.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:36:35.647Z,1516653395.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:36:35.648Z,1516653395.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:36:35.648Z,1516653395.648 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:36:35.649Z,1516653395.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:36:35.649Z,1516653395.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:36:35.649Z,1516653395.649 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:36:35.650Z,1516653395.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:36:35.650Z,1516653395.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:36:36.061Z,1516653396.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:36.452Z,1516653396.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:36.865Z,1516653396.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:37.270Z,1516653397.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:37.662Z,1516653397.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:38.060Z,1516653398.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:38.452Z,1516653398.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:38.856Z,1516653398.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:39.258Z,1516653399.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:39.645Z,1516653399.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:40.044Z,1516653400.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:40.454Z,1516653400.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:40.858Z,1516653400.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:41.255Z,1516653401.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:41.650Z,1516653401.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:42.065Z,1516653402.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:42.450Z,1516653402.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:42.868Z,1516653402.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:43.265Z,1516653403.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:43.661Z,1516653403.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:44.064Z,1516653404.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:44.461Z,1516653404.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:44.848Z,1516653404.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:45.252Z,1516653405.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:45.660Z,1516653405.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:46.048Z,1516653406.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:46.460Z,1516653406.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:46.861Z,1516653406.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:47.268Z,1516653407.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:47.652Z,1516653407.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:48.056Z,1516653408.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:48.452Z,1516653408.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:48.852Z,1516653408.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:49.272Z,1516653409.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:49.671Z,1516653409.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:50.083Z,1516653410.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:50.478Z,1516653410.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:50.850Z,1516653410.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:51.265Z,1516653411.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:51.664Z,1516653411.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:52.056Z,1516653412.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:52.480Z,1516653412.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:52.895Z,1516653412.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:53.350Z,1516653413.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:53.656Z,1516653413.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:54.064Z,1516653414.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:54.454Z,1516653414.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:54.864Z,1516653414.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:55.268Z,1516653415.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:55.674Z,1516653415.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:56.100Z,1516653416.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:56.449Z,1516653416.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:56.856Z,1516653416.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:57.261Z,1516653417.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:57.668Z,1516653417.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:58.076Z,1516653418.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:58.476Z,1516653418.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:58.880Z,1516653418.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:59.276Z,1516653419.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:36:59.646Z,1516653419.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:00.054Z,1516653420.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:00.448Z,1516653420.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:00.848Z,1516653420.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:01.262Z,1516653421.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:01.664Z,1516653421.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:02.068Z,1516653422.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:02.452Z,1516653422.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:02.845Z,1516653422.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:03.263Z,1516653423.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:03.672Z,1516653423.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:04.068Z,1516653424.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:04.452Z,1516653424.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:04.850Z,1516653424.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:05.255Z,1516653425.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:05.657Z,1516653425.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:06.056Z,1516653426.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:06.457Z,1516653426.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:06.870Z,1516653426.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:07.362Z,1516653427.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:07.653Z,1516653427.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:08.052Z,1516653428.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:08.452Z,1516653428.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:08.840Z,1516653428.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:09.268Z,1516653429.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:09.654Z,1516653429.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:10.053Z,1516653430.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:10.448Z,1516653430.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:10.851Z,1516653430.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:11.262Z,1516653431.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:11.654Z,1516653431.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:12.060Z,1516653432.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:12.453Z,1516653432.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:12.848Z,1516653432.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:13.268Z,1516653433.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:13.659Z,1516653433.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:14.060Z,1516653434.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:14.451Z,1516653434.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:14.856Z,1516653434.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:15.268Z,1516653435.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:15.668Z,1516653435.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:16.061Z,1516653436.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:16.449Z,1516653436.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:16.856Z,1516653436.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:17.257Z,1516653437.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:17.670Z,1516653437.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:18.155Z,1516653438.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:18.453Z,1516653438.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:18.849Z,1516653438.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:19.269Z,1516653439.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:19.662Z,1516653439.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:20.062Z,1516653440.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:20.460Z,1516653440.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:20.858Z,1516653440.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:21.269Z,1516653441.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:21.668Z,1516653441.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:22.072Z,1516653442.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:22.459Z,1516653442.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:22.848Z,1516653442.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:23.264Z,1516653443.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:23.664Z,1516653443.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:24.073Z,1516653444.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:24.461Z,1516653444.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:24.860Z,1516653444.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:25.270Z,1516653445.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:25.672Z,1516653445.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:26.067Z,1516653446.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:26.448Z,1516653446.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:26.845Z,1516653446.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:27.256Z,1516653447.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:27.654Z,1516653447.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:28.053Z,1516653448.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:28.447Z,1516653448.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:28.849Z,1516653448.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:29.250Z,1516653449.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:29.654Z,1516653449.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:30.060Z,1516653450.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:30.452Z,1516653450.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:30.852Z,1516653450.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:31.255Z,1516653451.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:31.660Z,1516653451.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:32.080Z,1516653452.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:35.332Z,1516653455.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:35.496Z,1516653455.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:35.834Z,1516653455.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:36.222Z,1516653456.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:36.604Z,1516653456.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:36.624Z,1516653456.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:37.011Z,1516653457.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:37.406Z,1516653457.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:37.488Z,1516653457.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:37.811Z,1516653457.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:37.814Z,1516653457.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:38.224Z,1516653458.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:38.608Z,1516653458.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:38.622Z,1516653458.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:39.101Z,1516653459.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:39.403Z,1516653459.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:39.414Z,1516653459.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:39.807Z,1516653459.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:39.813Z,1516653459.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:40.220Z,1516653460.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:40.604Z,1516653460.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:40.624Z,1516653460.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:41.062Z,1516653461.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:41.399Z,1516653461.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:41.427Z,1516653461.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:41.803Z,1516653461.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:41.812Z,1516653461.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:42.220Z,1516653462.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:42.599Z,1516653462.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:42.620Z,1516653462.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:43.087Z,1516653463.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:43.395Z,1516653463.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:43.421Z,1516653463.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:43.799Z,1516653463.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:43.819Z,1516653463.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:44.222Z,1516653464.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:44.595Z,1516653464.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:44.621Z,1516653464.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:45.013Z,1516653465.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:45.392Z,1516653465.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:45.427Z,1516653465.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:45.795Z,1516653465.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:45.824Z,1516653465.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:46.216Z,1516653466.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:46.635Z,1516653466.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:47.040Z,1516653467.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:47.433Z,1516653467.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:47.813Z,1516653467.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:48.208Z,1516653468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:48.641Z,1516653468.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:49.012Z,1516653469.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:49.485Z,1516653469.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:49.821Z,1516653469.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:50.224Z,1516653470.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:50.615Z,1516653470.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:51.014Z,1516653471.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:51.476Z,1516653471.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:51.824Z,1516653471.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:52.212Z,1516653472.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:52.626Z,1516653472.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:52.651Z,1516653472.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:53.028Z,1516653473.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:53.435Z,1516653473.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:53.447Z,1516653473.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:53.803Z,1516653473.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:53.851Z,1516653473.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:54.232Z,1516653474.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:54.604Z,1516653474.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:54.647Z,1516653474.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:55.007Z,1516653475.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:55.429Z,1516653475.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:55.479Z,1516653475.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:55.827Z,1516653475.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:55.883Z,1516653475.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:56.228Z,1516653476.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:56.620Z,1516653476.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:56.679Z,1516653476.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:57.004Z,1516653477.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:57.410Z,1516653477.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:57.479Z,1516653477.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:57.832Z,1516653477.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:58.212Z,1516653478.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:58.275Z,1516653478.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:58.626Z,1516653478.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:59.044Z,1516653479.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:59.073Z,1516653479.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:59.425Z,1516653479.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:37:59.491Z,1516653479.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:37:59.816Z,1516653479.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:00.220Z,1516653480.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:00.616Z,1516653480.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:01.016Z,1516653481.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:01.426Z,1516653481.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:01.832Z,1516653481.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:02.224Z,1516653482.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:02.620Z,1516653482.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:03.012Z,1516653483.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:03.477Z,1516653483.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:03.809Z,1516653483.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:04.203Z,1516653484.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:04.631Z,1516653484.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:05.033Z,1516653485.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:05.492Z,1516653485.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:05.808Z,1516653485.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:06.212Z,1516653486.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:06.607Z,1516653486.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:06.675Z,1516653486.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:07.016Z,1516653487.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:07.425Z,1516653487.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:07.471Z,1516653487.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:07.826Z,1516653487.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:07.875Z,1516653487.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:08.224Z,1516653488.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:08.620Z,1516653488.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:08.671Z,1516653488.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:09.016Z,1516653489.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:09.419Z,1516653489.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:09.467Z,1516653489.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:09.804Z,1516653489.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:09.871Z,1516653489.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:10.203Z,1516653490.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:10.627Z,1516653490.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:10.667Z,1516653490.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:11.029Z,1516653491.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:11.414Z,1516653491.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:11.463Z,1516653491.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:11.812Z,1516653491.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:11.868Z,1516653491.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:12.208Z,1516653492.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:12.612Z,1516653492.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:12.663Z,1516653492.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:13.009Z,1516653493.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:13.418Z,1516653493.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:13.459Z,1516653493.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:13.822Z,1516653493.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:13.863Z,1516653493.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:14.218Z,1516653494.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:14.620Z,1516653494.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:15.019Z,1516653495.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:15.412Z,1516653495.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:15.817Z,1516653495.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:16.212Z,1516653496.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:16.625Z,1516653496.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:17.025Z,1516653497.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:17.527Z,1516653497.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:17.821Z,1516653497.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:18.224Z,1516653498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:18.624Z,1516653498.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:18.655Z,1516653498.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:19.024Z,1516653499.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:19.452Z,1516653499.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:19.489Z,1516653499.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:19.818Z,1516653499.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:19.883Z,1516653499.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:20.218Z,1516653500.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:20.610Z,1516653500.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:20.679Z,1516653500.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:21.012Z,1516653501.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:21.416Z,1516653501.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:21.475Z,1516653501.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:21.824Z,1516653501.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:21.879Z,1516653501.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:22.213Z,1516653502.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:22.624Z,1516653502.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:22.676Z,1516653502.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:23.025Z,1516653503.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:23.450Z,1516653503.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:23.471Z,1516653503.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:23.811Z,1516653503.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:23.875Z,1516653503.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:24.216Z,1516653504.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:24.623Z,1516653504.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:24.671Z,1516653504.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:25.012Z,1516653505.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:25.425Z,1516653505.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:25.467Z,1516653505.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:25.836Z,1516653505.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:25.871Z,1516653505.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:26.224Z,1516653506.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:26.620Z,1516653506.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:26.667Z,1516653506.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:27.012Z,1516653507.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:27.411Z,1516653507.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:27.463Z,1516653507.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:27.824Z,1516653507.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:27.867Z,1516653507.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:28.212Z,1516653508.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:28.618Z,1516653508.618 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:38:28.619Z,1516653508.619 [BPC1] Communications Fault, FailCount= 7
2018-01-22T20:38:28.619Z,1516653508.619 [BPC1](ERROR): Communications Fault
2018-01-22T20:38:28.626Z,1516653508.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:28.640Z,1516653508.640 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:38:28.664Z,1516653508.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:29.028Z,1516653509.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:29.421Z,1516653509.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:29.459Z,1516653509.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:29.817Z,1516653509.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:29.831Z,1516653509.831 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:38:29.831Z,1516653509.831 [BPC1] No Fault, FailCount= 7
2018-01-22T20:38:29.863Z,1516653509.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:30.272Z,1516653510.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:30.616Z,1516653510.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:31.021Z,1516653511.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:31.426Z,1516653511.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:31.834Z,1516653511.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:32.235Z,1516653512.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:32.691Z,1516653512.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:33.489Z,1516653513.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:33.895Z,1516653513.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:34.691Z,1516653514.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:35.487Z,1516653515.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:35.539Z,1516653515.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:35.677Z,1516653515.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:35.891Z,1516653515.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:36.019Z,1516653516.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:36.434Z,1516653516.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:36.687Z,1516653516.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:36.806Z,1516653516.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:37.231Z,1516653517.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:37.483Z,1516653517.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:37.609Z,1516653517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:37.887Z,1516653517.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:38.008Z,1516653518.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:38.410Z,1516653518.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:38.683Z,1516653518.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:38.809Z,1516653518.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:39.227Z,1516653519.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:39.479Z,1516653519.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:39.608Z,1516653519.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:39.883Z,1516653519.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:40.009Z,1516653520.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:40.411Z,1516653520.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:40.679Z,1516653520.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:40.804Z,1516653520.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:41.242Z,1516653521.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:41.475Z,1516653521.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:41.611Z,1516653521.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:41.879Z,1516653521.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:42.010Z,1516653522.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:42.416Z,1516653522.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:42.675Z,1516653522.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:42.802Z,1516653522.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:43.255Z,1516653523.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:43.471Z,1516653523.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:43.608Z,1516653523.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:43.875Z,1516653523.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:44.012Z,1516653524.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:44.416Z,1516653524.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:44.671Z,1516653524.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:44.824Z,1516653524.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:45.217Z,1516653525.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:45.476Z,1516653525.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:45.631Z,1516653525.631 [BPC1](INFO): Initialized
2018-01-22T20:38:45.661Z,1516653525.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:45.895Z,1516653525.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:46.012Z,1516653526.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:46.420Z,1516653526.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:46.691Z,1516653526.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:46.824Z,1516653526.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:47.227Z,1516653527.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:47.489Z,1516653527.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:47.616Z,1516653527.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:47.903Z,1516653527.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:48.000Z,1516653528.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:48.432Z,1516653528.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:48.699Z,1516653528.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:48.821Z,1516653528.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:49.241Z,1516653529.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:49.495Z,1516653529.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:49.596Z,1516653529.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:49.899Z,1516653529.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:50.028Z,1516653530.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:50.408Z,1516653530.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:50.695Z,1516653530.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:50.800Z,1516653530.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:51.239Z,1516653531.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:51.491Z,1516653531.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:51.573Z,1516653531.573 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T20:38:51.573Z,1516653531.573 [NAL9602] Data Fault, FailCount= 4
2018-01-22T20:38:51.573Z,1516653531.573 [NAL9602](ERROR): Data Fault
2018-01-22T20:38:51.605Z,1516653531.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:51.638Z,1516653531.638 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T20:38:51.895Z,1516653531.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:51.964Z,1516653531.964 [NAL9602](INFO): Powering down
2018-01-22T20:38:52.002Z,1516653532.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:52.408Z,1516653532.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:52.691Z,1516653532.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:52.812Z,1516653532.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:52.825Z,1516653532.825 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T20:38:52.825Z,1516653532.825 [NAL9602] No Fault, FailCount= 4
2018-01-22T20:38:53.252Z,1516653533.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:53.487Z,1516653533.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:53.604Z,1516653533.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:53.891Z,1516653533.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:54.005Z,1516653534.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:54.404Z,1516653534.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:54.689Z,1516653534.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:54.804Z,1516653534.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:55.256Z,1516653535.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:55.483Z,1516653535.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:55.611Z,1516653535.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:55.888Z,1516653535.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:56.004Z,1516653536.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:56.408Z,1516653536.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:56.683Z,1516653536.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:56.810Z,1516653536.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:57.261Z,1516653537.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:57.479Z,1516653537.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:57.619Z,1516653537.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:57.883Z,1516653537.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:58.000Z,1516653538.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:58.399Z,1516653538.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:58.679Z,1516653538.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:58.802Z,1516653538.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:59.204Z,1516653539.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:59.475Z,1516653539.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:38:59.600Z,1516653539.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:38:59.935Z,1516653539.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:00.002Z,1516653540.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:00.413Z,1516653540.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:00.731Z,1516653540.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:00.803Z,1516653540.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:01.211Z,1516653541.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:01.529Z,1516653541.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:01.618Z,1516653541.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:01.935Z,1516653541.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:02.012Z,1516653542.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:02.420Z,1516653542.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:02.731Z,1516653542.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:02.816Z,1516653542.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:03.265Z,1516653543.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:03.527Z,1516653543.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:03.608Z,1516653543.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:03.931Z,1516653543.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:04.016Z,1516653544.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:04.391Z,1516653544.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:04.727Z,1516653544.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:04.800Z,1516653544.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:05.268Z,1516653545.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:05.524Z,1516653545.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:05.619Z,1516653545.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:05.927Z,1516653545.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:06.000Z,1516653546.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:06.399Z,1516653546.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:06.724Z,1516653546.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:06.802Z,1516653546.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:07.252Z,1516653547.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:07.520Z,1516653547.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:07.608Z,1516653547.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:07.923Z,1516653547.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:08.011Z,1516653548.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:08.408Z,1516653548.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:08.719Z,1516653548.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:08.808Z,1516653548.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:09.270Z,1516653549.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:09.515Z,1516653549.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:09.612Z,1516653549.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:09.919Z,1516653549.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:10.022Z,1516653550.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:10.402Z,1516653550.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:10.715Z,1516653550.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:10.802Z,1516653550.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:11.261Z,1516653551.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:11.511Z,1516653551.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:11.600Z,1516653551.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:11.915Z,1516653551.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:12.001Z,1516653552.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:12.424Z,1516653552.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:12.713Z,1516653552.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:12.802Z,1516653552.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:13.212Z,1516653553.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:13.509Z,1516653553.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:13.621Z,1516653553.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:13.966Z,1516653553.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:14.007Z,1516653554.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:14.412Z,1516653554.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:14.763Z,1516653554.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:14.817Z,1516653554.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:15.212Z,1516653555.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:15.561Z,1516653555.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:15.644Z,1516653555.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:15.970Z,1516653555.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:15.997Z,1516653555.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:16.400Z,1516653556.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:16.763Z,1516653556.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:16.815Z,1516653556.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:17.268Z,1516653557.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:17.559Z,1516653557.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:17.620Z,1516653557.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:17.963Z,1516653557.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:18.009Z,1516653558.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:18.412Z,1516653558.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:18.759Z,1516653558.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:18.811Z,1516653558.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:19.265Z,1516653559.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:19.567Z,1516653559.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:19.603Z,1516653559.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:19.972Z,1516653559.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:20.000Z,1516653560.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:20.404Z,1516653560.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:20.770Z,1516653560.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:20.795Z,1516653560.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:21.276Z,1516653561.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:21.563Z,1516653561.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:21.616Z,1516653561.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:21.969Z,1516653561.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:22.005Z,1516653562.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:22.364Z,1516653562.364 [NAL9602](INFO): Powering up NAL9602
2018-01-22T20:39:22.412Z,1516653562.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:22.763Z,1516653562.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:22.811Z,1516653562.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:23.300Z,1516653563.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:23.559Z,1516653563.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:23.612Z,1516653563.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:23.963Z,1516653563.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:24.008Z,1516653564.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:24.408Z,1516653564.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:24.759Z,1516653564.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:24.805Z,1516653564.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:25.202Z,1516653565.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:25.567Z,1516653565.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:25.604Z,1516653565.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:26.003Z,1516653566.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:26.013Z,1516653566.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:26.409Z,1516653566.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:26.799Z,1516653566.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:26.814Z,1516653566.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:27.211Z,1516653567.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:27.601Z,1516653567.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:27.641Z,1516653567.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:28.007Z,1516653568.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:28.018Z,1516653568.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:28.394Z,1516653568.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:28.794Z,1516653568.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:28.803Z,1516653568.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:29.196Z,1516653569.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:29.600Z,1516653569.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:29.663Z,1516653569.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:29.000Z,1516653570.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:30.003Z,1516653570.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:30.400Z,1516653570.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:30.798Z,1516653570.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:30.799Z,1516653570.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:31.249Z,1516653571.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:31.595Z,1516653571.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:31.608Z,1516653571.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:31.999Z,1516653571.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:32.010Z,1516653572.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:32.404Z,1516653572.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:32.795Z,1516653572.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:33.591Z,1516653573.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:33.996Z,1516653573.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:34.791Z,1516653574.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:35.587Z,1516653575.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:35.737Z,1516653575.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:35.737Z,1516653575.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-01-22T20:39:35.737Z,1516653575.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:39:35.739Z,1516653575.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:35.739Z,1516653575.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-01-22T20:39:35.740Z,1516653575.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:39:35.741Z,1516653575.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:35.742Z,1516653575.742 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-01-22T20:39:35.742Z,1516653575.742 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:39:35.753Z,1516653575.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:39:35.754Z,1516653575.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:39:35.754Z,1516653575.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:39:35.831Z,1516653575.831 [NAL9602](INFO): NAL9602 initialized
2018-01-22T20:39:35.907Z,1516653575.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:39:35.907Z,1516653575.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-01-22T20:39:35.908Z,1516653575.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:39:35.908Z,1516653575.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-01-22T20:39:35.908Z,1516653575.908 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:39:35.908Z,1516653575.908 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-01-22T20:39:35.991Z,1516653575.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:36.216Z,1516653576.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:39:36.217Z,1516653576.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:39:36.217Z,1516653576.217 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:39:36.218Z,1516653576.218 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:39:36.218Z,1516653576.218 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:39:36.219Z,1516653576.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:39:36.223Z,1516653576.223 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:39:36.223Z,1516653576.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:39:36.223Z,1516653576.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:39:36.621Z,1516653576.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:36.787Z,1516653576.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:37.026Z,1516653577.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:37.445Z,1516653577.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:37.583Z,1516653577.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:37.828Z,1516653577.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:37.987Z,1516653577.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:38.222Z,1516653578.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:38.619Z,1516653578.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:38.783Z,1516653578.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:39.038Z,1516653579.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:39.426Z,1516653579.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:39.579Z,1516653579.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:39.829Z,1516653579.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:39.983Z,1516653579.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:40.226Z,1516653580.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:40.620Z,1516653580.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:40.779Z,1516653580.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:41.018Z,1516653581.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:41.404Z,1516653581.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:41.577Z,1516653581.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:41.808Z,1516653581.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:41.983Z,1516653581.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:42.231Z,1516653582.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:42.630Z,1516653582.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:42.779Z,1516653582.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:43.025Z,1516653583.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:43.412Z,1516653583.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:43.577Z,1516653583.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:43.840Z,1516653583.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:43.987Z,1516653583.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:44.202Z,1516653584.202 [PNI_TCM](ERROR): CRC does not match. Expected:0x61153 got:0x30748
2018-01-22T20:39:44.235Z,1516653584.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:44.609Z,1516653584.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:44.783Z,1516653584.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:45.040Z,1516653585.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:45.440Z,1516653585.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:45.579Z,1516653585.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:45.857Z,1516653585.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:45.983Z,1516653585.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:46.209Z,1516653586.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:46.612Z,1516653586.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:46.779Z,1516653586.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:47.033Z,1516653587.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:47.412Z,1516653587.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:47.575Z,1516653587.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:47.811Z,1516653587.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:47.979Z,1516653587.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:48.235Z,1516653588.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:48.636Z,1516653588.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:48.775Z,1516653588.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:49.039Z,1516653589.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:49.415Z,1516653589.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:49.571Z,1516653589.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:49.841Z,1516653589.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:49.975Z,1516653589.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:50.234Z,1516653590.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:50.615Z,1516653590.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:50.775Z,1516653590.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:51.037Z,1516653591.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:51.417Z,1516653591.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:51.574Z,1516653591.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:51.836Z,1516653591.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:51.979Z,1516653591.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:52.244Z,1516653592.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:52.613Z,1516653592.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:52.775Z,1516653592.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:53.010Z,1516653593.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:53.421Z,1516653593.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:53.573Z,1516653593.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:53.805Z,1516653593.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:53.975Z,1516653593.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:54.220Z,1516653594.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:54.617Z,1516653594.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:54.771Z,1516653594.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:55.041Z,1516653595.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:55.407Z,1516653595.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:55.569Z,1516653595.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:55.816Z,1516653595.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:55.999Z,1516653595.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:56.215Z,1516653596.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:56.638Z,1516653596.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:56.795Z,1516653596.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:57.034Z,1516653597.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:57.421Z,1516653597.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:57.593Z,1516653597.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:57.818Z,1516653597.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:58.003Z,1516653598.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:58.209Z,1516653598.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:58.610Z,1516653598.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:58.799Z,1516653598.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:59.013Z,1516653599.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:59.413Z,1516653599.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:59.595Z,1516653599.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:39:59.824Z,1516653599.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:39:59.999Z,1516653599.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:00.229Z,1516653600.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:00.626Z,1516653600.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:00.795Z,1516653600.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:01.034Z,1516653601.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:01.449Z,1516653601.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:01.591Z,1516653601.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:01.826Z,1516653601.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:01.995Z,1516653601.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:02.234Z,1516653602.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:02.620Z,1516653602.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:02.791Z,1516653602.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:03.021Z,1516653603.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:03.434Z,1516653603.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:03.589Z,1516653603.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:03.827Z,1516653603.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:03.995Z,1516653603.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:04.224Z,1516653604.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:04.608Z,1516653604.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:04.791Z,1516653604.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:05.008Z,1516653605.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:05.417Z,1516653605.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:05.589Z,1516653605.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:05.817Z,1516653605.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:05.996Z,1516653605.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:06.220Z,1516653606.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:06.620Z,1516653606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:06.791Z,1516653606.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:07.026Z,1516653607.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:07.419Z,1516653607.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:07.587Z,1516653607.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:07.804Z,1516653607.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:07.991Z,1516653607.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:08.204Z,1516653608.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:08.603Z,1516653608.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:08.787Z,1516653608.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:09.044Z,1516653609.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:09.433Z,1516653609.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:09.585Z,1516653609.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:09.809Z,1516653609.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:10.019Z,1516653610.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:10.209Z,1516653610.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:10.608Z,1516653610.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:10.815Z,1516653610.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:11.008Z,1516653611.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:11.416Z,1516653611.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:11.613Z,1516653611.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:11.816Z,1516653611.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:12.027Z,1516653612.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:12.228Z,1516653612.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:12.623Z,1516653612.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:12.823Z,1516653612.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:13.024Z,1516653613.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:13.409Z,1516653613.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:13.619Z,1516653613.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:13.835Z,1516653613.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:14.023Z,1516653614.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:14.216Z,1516653614.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:14.624Z,1516653614.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:14.819Z,1516653614.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:15.028Z,1516653615.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:15.422Z,1516653615.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:15.615Z,1516653615.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:15.827Z,1516653615.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:16.019Z,1516653616.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:16.228Z,1516653616.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:16.624Z,1516653616.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:16.815Z,1516653616.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:17.004Z,1516653617.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:17.404Z,1516653617.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:17.611Z,1516653617.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:17.816Z,1516653617.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:18.015Z,1516653618.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:18.214Z,1516653618.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:18.620Z,1516653618.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:18.811Z,1516653618.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:19.018Z,1516653619.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:19.413Z,1516653619.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:19.607Z,1516653619.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:19.816Z,1516653619.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:20.011Z,1516653620.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:20.208Z,1516653620.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:20.608Z,1516653620.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:20.807Z,1516653620.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:21.013Z,1516653621.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:21.437Z,1516653621.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:21.603Z,1516653621.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:21.814Z,1516653621.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:22.007Z,1516653622.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:22.220Z,1516653622.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:22.607Z,1516653622.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:22.803Z,1516653622.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:23.006Z,1516653623.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:23.412Z,1516653623.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:23.599Z,1516653623.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:23.816Z,1516653623.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:24.059Z,1516653624.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:24.220Z,1516653624.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:24.620Z,1516653624.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:24.855Z,1516653624.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:25.020Z,1516653625.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:25.413Z,1516653625.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:25.652Z,1516653625.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:25.819Z,1516653625.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:26.071Z,1516653626.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:26.214Z,1516653626.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:26.615Z,1516653626.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:26.867Z,1516653626.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:27.022Z,1516653627.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:27.428Z,1516653627.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:27.663Z,1516653627.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:27.830Z,1516653627.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:28.068Z,1516653628.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:28.212Z,1516653628.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:28.600Z,1516653628.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:28.863Z,1516653628.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:29.004Z,1516653629.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:29.400Z,1516653629.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:29.659Z,1516653629.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:29.812Z,1516653629.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:30.063Z,1516653630.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:30.220Z,1516653630.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:30.624Z,1516653630.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:30.859Z,1516653630.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:31.016Z,1516653631.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:31.408Z,1516653631.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:31.655Z,1516653631.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:31.821Z,1516653631.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:31.825Z,1516653631.825 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:35:31.6Z
2018-01-22T20:40:31.825Z,1516653631.825 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T20:40:31.825Z,1516653631.825 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T20:40:32.059Z,1516653632.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:32.205Z,1516653632.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:32.725Z,1516653632.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:32.855Z,1516653632.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:33.651Z,1516653633.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:34.055Z,1516653634.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:34.851Z,1516653634.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:35.647Z,1516653635.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:35.922Z,1516653635.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:36.007Z,1516653636.007 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0056.lzma
2018-01-22T20:40:36.051Z,1516653636.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:36.084Z,1516653636.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:36.407Z,1516653636.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:36.749Z,1516653636.749 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0056.lzma.bak
2018-01-22T20:40:36.749Z,1516653636.749 [DataOverHttps](INFO): SBD MOMSN=7751607
2018-01-22T20:40:36.816Z,1516653636.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:36.847Z,1516653636.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:37.394Z,1516653637.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:37.586Z,1516653637.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:37.645Z,1516653637.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:38.079Z,1516653638.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:38.875Z,1516653638.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:39.673Z,1516653639.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:40.087Z,1516653640.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:40.834Z,1516653640.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:40.883Z,1516653640.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:40.980Z,1516653640.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:41.380Z,1516653641.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:41.680Z,1516653641.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:41.728Z,1516653641.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:42.083Z,1516653642.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:42.104Z,1516653642.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:42.512Z,1516653642.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:42.879Z,1516653642.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:43.675Z,1516653643.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:44.079Z,1516653644.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:44.875Z,1516653644.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:45.671Z,1516653645.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:45.803Z,1516653645.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:45.891Z,1516653645.891 [DataOverHttps](INFO): Sending 129 bytes from file Logs/20180122T180533/Express0057.lzma
2018-01-22T20:40:45.951Z,1516653645.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:46.075Z,1516653646.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:46.292Z,1516653646.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:46.629Z,1516653646.629 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0057.lzma.bak
2018-01-22T20:40:46.630Z,1516653646.630 [DataOverHttps](INFO): SBD MOMSN=7751609
2018-01-22T20:40:46.709Z,1516653646.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:46.873Z,1516653646.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:47.286Z,1516653647.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:47.289Z,1516653647.289 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T20:40:47.289Z,1516653647.289 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T20:40:47.289Z,1516653647.289 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T20:40:47.495Z,1516653647.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:47.667Z,1516653647.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:48.071Z,1516653648.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:48.867Z,1516653648.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:49.663Z,1516653649.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:50.067Z,1516653650.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:50.760Z,1516653650.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:50.864Z,1516653650.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:50.904Z,1516653650.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:51.246Z,1516653651.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:51.639Z,1516653651.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:51.661Z,1516653651.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:52.036Z,1516653652.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:52.107Z,1516653652.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:52.428Z,1516653652.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:52.830Z,1516653652.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:52.903Z,1516653652.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:53.234Z,1516653653.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:53.633Z,1516653653.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:53.701Z,1516653653.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:54.061Z,1516653654.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:54.107Z,1516653654.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:54.420Z,1516653654.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:54.824Z,1516653654.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:54.903Z,1516653654.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:55.220Z,1516653655.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:55.624Z,1516653655.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:55.699Z,1516653655.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:56.030Z,1516653656.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:56.103Z,1516653656.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:56.453Z,1516653656.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:56.838Z,1516653656.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:56.899Z,1516653656.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:57.225Z,1516653657.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:57.626Z,1516653657.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:57.695Z,1516653657.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:58.056Z,1516653658.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:58.099Z,1516653658.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:58.430Z,1516653658.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:58.839Z,1516653658.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:58.895Z,1516653658.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:40:59.252Z,1516653659.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:59.652Z,1516653659.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:40:59.691Z,1516653659.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:00.054Z,1516653660.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:00.095Z,1516653660.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:00.436Z,1516653660.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:00.837Z,1516653660.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:00.891Z,1516653660.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:01.232Z,1516653661.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:01.640Z,1516653661.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:01.687Z,1516653661.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:02.049Z,1516653662.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:02.091Z,1516653662.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:02.456Z,1516653662.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:02.850Z,1516653662.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:02.887Z,1516653662.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:03.228Z,1516653663.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:03.640Z,1516653663.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:03.683Z,1516653663.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:04.034Z,1516653664.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:04.087Z,1516653664.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:04.426Z,1516653664.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:04.836Z,1516653664.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:04.883Z,1516653664.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:05.234Z,1516653665.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:05.633Z,1516653665.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:05.681Z,1516653665.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:06.046Z,1516653666.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:06.119Z,1516653666.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:06.428Z,1516653666.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:06.827Z,1516653666.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:06.915Z,1516653666.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:07.239Z,1516653667.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:07.628Z,1516653667.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:07.713Z,1516653667.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:08.047Z,1516653668.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:08.120Z,1516653668.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:08.445Z,1516653668.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:08.844Z,1516653668.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:08.915Z,1516653668.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:09.228Z,1516653669.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:09.640Z,1516653669.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:09.711Z,1516653669.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:10.020Z,1516653670.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:10.115Z,1516653670.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:10.424Z,1516653670.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:10.824Z,1516653670.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:10.911Z,1516653670.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:11.250Z,1516653671.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:11.653Z,1516653671.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:11.707Z,1516653671.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:12.052Z,1516653672.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:12.111Z,1516653672.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:12.429Z,1516653672.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:12.828Z,1516653672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:12.909Z,1516653672.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:13.237Z,1516653673.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:13.629Z,1516653673.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:13.703Z,1516653673.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:14.042Z,1516653674.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:14.107Z,1516653674.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:14.456Z,1516653674.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:14.844Z,1516653674.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:14.903Z,1516653674.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:15.236Z,1516653675.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:15.640Z,1516653675.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:15.699Z,1516653675.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:16.021Z,1516653676.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:16.103Z,1516653676.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:16.425Z,1516653676.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:16.819Z,1516653676.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:16.899Z,1516653676.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:17.251Z,1516653677.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:17.653Z,1516653677.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:17.695Z,1516653677.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:18.034Z,1516653678.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:18.099Z,1516653678.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:18.428Z,1516653678.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:18.832Z,1516653678.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:18.895Z,1516653678.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:19.224Z,1516653679.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:19.632Z,1516653679.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:19.691Z,1516653679.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:20.057Z,1516653680.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:20.127Z,1516653680.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:20.458Z,1516653680.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:20.838Z,1516653680.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:20.923Z,1516653680.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:21.225Z,1516653681.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:21.626Z,1516653681.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:21.722Z,1516653681.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:22.036Z,1516653682.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:22.135Z,1516653682.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:22.427Z,1516653682.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:22.832Z,1516653682.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:22.931Z,1516653682.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:23.234Z,1516653683.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:23.634Z,1516653683.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:23.727Z,1516653683.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:24.034Z,1516653684.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:24.131Z,1516653684.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:24.427Z,1516653684.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:24.827Z,1516653684.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:24.927Z,1516653684.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:25.227Z,1516653685.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:25.626Z,1516653685.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:25.723Z,1516653685.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:26.044Z,1516653686.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:26.127Z,1516653686.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:26.437Z,1516653686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:26.836Z,1516653686.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:26.923Z,1516653686.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:27.240Z,1516653687.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:27.641Z,1516653687.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:27.719Z,1516653687.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:28.042Z,1516653688.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:28.123Z,1516653688.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:28.445Z,1516653688.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:28.841Z,1516653688.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:28.919Z,1516653688.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:29.234Z,1516653689.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:29.632Z,1516653689.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:29.715Z,1516653689.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:30.052Z,1516653690.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:30.119Z,1516653690.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:30.441Z,1516653690.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:30.842Z,1516653690.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:30.915Z,1516653690.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:31.240Z,1516653691.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:31.628Z,1516653691.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:31.712Z,1516653691.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:32.052Z,1516653692.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:32.115Z,1516653692.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:32.448Z,1516653692.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:32.841Z,1516653692.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:32.911Z,1516653692.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:33.236Z,1516653693.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:33.631Z,1516653693.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:33.707Z,1516653693.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:34.050Z,1516653694.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:34.155Z,1516653694.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:34.444Z,1516653694.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:34.852Z,1516653694.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:34.951Z,1516653694.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:35.244Z,1516653695.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:35.640Z,1516653695.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:35.749Z,1516653695.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:36.045Z,1516653696.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:36.155Z,1516653696.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:36.443Z,1516653696.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:36.849Z,1516653696.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:36.951Z,1516653696.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:37.220Z,1516653697.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:37.636Z,1516653697.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:37.747Z,1516653697.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:38.056Z,1516653698.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:38.151Z,1516653698.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:38.449Z,1516653698.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:38.847Z,1516653698.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:38.947Z,1516653698.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:39.228Z,1516653699.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:39.640Z,1516653699.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:39.743Z,1516653699.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:40.042Z,1516653700.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:40.147Z,1516653700.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:40.440Z,1516653700.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:40.838Z,1516653700.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:40.943Z,1516653700.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:41.232Z,1516653701.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:41.626Z,1516653701.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:41.739Z,1516653701.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:42.044Z,1516653702.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:42.143Z,1516653702.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:42.444Z,1516653702.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:42.844Z,1516653702.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:42.940Z,1516653702.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:43.234Z,1516653703.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:43.632Z,1516653703.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:43.735Z,1516653703.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:44.040Z,1516653704.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:44.139Z,1516653704.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:44.445Z,1516653704.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:44.840Z,1516653704.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:44.935Z,1516653704.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:45.236Z,1516653705.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:45.644Z,1516653705.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:45.731Z,1516653705.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:46.040Z,1516653706.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:46.135Z,1516653706.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:46.444Z,1516653706.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:46.841Z,1516653706.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:46.931Z,1516653706.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:47.232Z,1516653707.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:47.634Z,1516653707.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:47.727Z,1516653707.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:48.044Z,1516653708.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:48.191Z,1516653708.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:48.988Z,1516653708.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:49.785Z,1516653709.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:50.223Z,1516653710.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:51.020Z,1516653711.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:51.815Z,1516653711.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:52.219Z,1516653712.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:53.015Z,1516653713.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:53.676Z,1516653713.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:53.811Z,1516653713.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:53.852Z,1516653713.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:54.163Z,1516653714.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:54.215Z,1516653714.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:54.560Z,1516653714.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:54.956Z,1516653714.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:55.011Z,1516653715.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:55.381Z,1516653715.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:55.777Z,1516653715.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:55.815Z,1516653715.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:56.172Z,1516653716.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:56.219Z,1516653716.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:56.577Z,1516653716.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:56.975Z,1516653716.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:57.015Z,1516653717.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:57.350Z,1516653717.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:57.766Z,1516653717.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:57.811Z,1516653717.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:58.180Z,1516653718.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:58.215Z,1516653718.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:58.561Z,1516653718.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:58.992Z,1516653718.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:59.012Z,1516653719.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:41:59.356Z,1516653719.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:59.769Z,1516653719.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:41:59.807Z,1516653719.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:00.166Z,1516653720.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:00.211Z,1516653720.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:00.564Z,1516653720.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:00.964Z,1516653720.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:01.008Z,1516653721.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:01.388Z,1516653721.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:01.804Z,1516653721.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:01.832Z,1516653721.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:02.172Z,1516653722.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:02.219Z,1516653722.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:02.540Z,1516653722.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:02.942Z,1516653722.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:03.015Z,1516653723.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:03.345Z,1516653723.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:03.748Z,1516653723.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:03.812Z,1516653723.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:04.191Z,1516653724.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:04.219Z,1516653724.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:04.559Z,1516653724.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:04.959Z,1516653724.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:05.015Z,1516653725.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:05.350Z,1516653725.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:05.756Z,1516653725.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:05.811Z,1516653725.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:06.156Z,1516653726.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:06.215Z,1516653726.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:06.558Z,1516653726.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:06.945Z,1516653726.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:07.011Z,1516653727.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:07.376Z,1516653727.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:07.766Z,1516653727.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:07.807Z,1516653727.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:08.156Z,1516653728.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:08.211Z,1516653728.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:08.551Z,1516653728.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:08.951Z,1516653728.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:09.007Z,1516653729.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:09.349Z,1516653729.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:09.750Z,1516653729.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:09.803Z,1516653729.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:10.169Z,1516653730.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:10.207Z,1516653730.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:10.558Z,1516653730.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:10.959Z,1516653730.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:11.003Z,1516653731.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:11.354Z,1516653731.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:11.750Z,1516653731.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:11.800Z,1516653731.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:12.151Z,1516653732.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:12.203Z,1516653732.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:12.561Z,1516653732.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:12.949Z,1516653732.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:12.999Z,1516653732.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:13.366Z,1516653733.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:13.772Z,1516653733.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:13.795Z,1516653733.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:14.157Z,1516653734.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:14.199Z,1516653734.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:14.554Z,1516653734.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:14.944Z,1516653734.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:14.995Z,1516653734.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:15.356Z,1516653735.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:15.736Z,1516653735.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:15.793Z,1516653735.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:16.158Z,1516653736.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:16.219Z,1516653736.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:16.556Z,1516653736.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:16.958Z,1516653736.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:17.015Z,1516653737.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:17.346Z,1516653737.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:17.753Z,1516653737.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:17.813Z,1516653737.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:18.152Z,1516653738.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:18.235Z,1516653738.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:18.552Z,1516653738.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:18.950Z,1516653738.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:19.031Z,1516653739.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:19.358Z,1516653739.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:19.764Z,1516653739.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:19.827Z,1516653739.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:20.157Z,1516653740.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:20.231Z,1516653740.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:20.548Z,1516653740.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:20.947Z,1516653740.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:21.029Z,1516653741.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:21.345Z,1516653741.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:21.752Z,1516653741.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:21.823Z,1516653741.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:22.165Z,1516653742.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:22.228Z,1516653742.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:22.557Z,1516653742.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:22.958Z,1516653742.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:23.023Z,1516653743.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:23.360Z,1516653743.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:23.753Z,1516653743.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:23.819Z,1516653743.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:24.156Z,1516653744.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:24.223Z,1516653744.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:24.544Z,1516653744.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:24.944Z,1516653744.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:25.019Z,1516653745.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:25.349Z,1516653745.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:25.758Z,1516653745.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:25.815Z,1516653745.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:26.145Z,1516653746.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:26.219Z,1516653746.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:26.540Z,1516653746.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:26.936Z,1516653746.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:27.015Z,1516653747.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:27.344Z,1516653747.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:27.741Z,1516653747.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:27.811Z,1516653747.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:28.154Z,1516653748.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:28.215Z,1516653748.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:28.568Z,1516653748.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:28.954Z,1516653748.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:29.011Z,1516653749.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:29.344Z,1516653749.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:29.740Z,1516653749.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:29.809Z,1516653749.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:30.140Z,1516653750.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:30.536Z,1516653750.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:30.603Z,1516653750.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:30.944Z,1516653750.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:31.399Z,1516653751.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:31.497Z,1516653751.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:31.760Z,1516653751.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:31.875Z,1516653751.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:32.156Z,1516653752.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:32.280Z,1516653752.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:32.548Z,1516653752.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:32.949Z,1516653752.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:33.075Z,1516653753.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:33.344Z,1516653753.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:33.751Z,1516653753.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:33.875Z,1516653753.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:34.158Z,1516653754.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:34.279Z,1516653754.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:34.556Z,1516653754.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:34.956Z,1516653754.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:35.075Z,1516653755.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:35.348Z,1516653755.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:35.756Z,1516653755.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:35.873Z,1516653755.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:36.146Z,1516653756.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:36.279Z,1516653756.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:36.556Z,1516653756.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:36.556Z,1516653756.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-01-22T20:42:36.556Z,1516653756.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:42:36.558Z,1516653756.558 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:36.558Z,1516653756.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-01-22T20:42:36.558Z,1516653756.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:42:36.564Z,1516653756.564 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:36.564Z,1516653756.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-01-22T20:42:36.565Z,1516653756.565 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:42:36.585Z,1516653756.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:42:36.585Z,1516653756.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:42:36.585Z,1516653756.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:42:36.972Z,1516653756.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:42:36.972Z,1516653756.972 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-01-22T20:42:36.972Z,1516653756.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:42:36.972Z,1516653756.972 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-01-22T20:42:36.973Z,1516653756.973 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:42:36.973Z,1516653756.973 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-01-22T20:42:37.075Z,1516653757.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:37.367Z,1516653757.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:42:37.367Z,1516653757.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:42:37.367Z,1516653757.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:42:37.368Z,1516653757.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:42:37.368Z,1516653757.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:42:37.368Z,1516653757.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:42:37.369Z,1516653757.369 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:42:37.369Z,1516653757.369 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:42:37.369Z,1516653757.369 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:42:37.775Z,1516653757.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:37.871Z,1516653757.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:38.160Z,1516653758.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:38.275Z,1516653758.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:38.540Z,1516653758.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:38.936Z,1516653758.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:39.071Z,1516653759.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:39.340Z,1516653759.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:39.748Z,1516653759.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:39.869Z,1516653759.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:40.164Z,1516653760.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:40.275Z,1516653760.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:40.558Z,1516653760.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:40.966Z,1516653760.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:41.073Z,1516653761.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:41.352Z,1516653761.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:41.752Z,1516653761.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:41.867Z,1516653761.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:42.168Z,1516653762.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:42.273Z,1516653762.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:42.557Z,1516653762.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:42.963Z,1516653762.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:43.068Z,1516653763.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:43.349Z,1516653763.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:43.756Z,1516653763.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:43.865Z,1516653763.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:44.166Z,1516653764.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:44.271Z,1516653764.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:44.560Z,1516653764.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:44.964Z,1516653764.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:45.067Z,1516653765.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:45.357Z,1516653765.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:45.756Z,1516653765.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:45.865Z,1516653765.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:46.164Z,1516653766.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:46.271Z,1516653766.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:46.570Z,1516653766.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:46.959Z,1516653766.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:47.067Z,1516653767.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:47.348Z,1516653767.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:47.760Z,1516653767.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:47.863Z,1516653767.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:48.170Z,1516653768.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:48.267Z,1516653768.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:49.063Z,1516653769.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:49.859Z,1516653769.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:50.263Z,1516653770.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:51.059Z,1516653771.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:51.416Z,1516653771.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:51.608Z,1516653771.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:51.855Z,1516653771.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:51.884Z,1516653771.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:52.259Z,1516653772.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:52.281Z,1516653772.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:52.685Z,1516653772.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:53.056Z,1516653773.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:53.082Z,1516653773.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:53.490Z,1516653773.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:53.851Z,1516653773.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:53.897Z,1516653773.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:54.255Z,1516653774.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:54.298Z,1516653774.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:54.688Z,1516653774.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:55.051Z,1516653775.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:55.096Z,1516653775.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:55.489Z,1516653775.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:55.848Z,1516653775.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:55.904Z,1516653775.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:56.251Z,1516653776.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:56.302Z,1516653776.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:56.702Z,1516653776.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:57.047Z,1516653777.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:57.106Z,1516653777.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:57.497Z,1516653777.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:57.843Z,1516653777.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:57.943Z,1516653777.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:58.277Z,1516653778.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:58.343Z,1516653778.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:58.678Z,1516653778.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:59.080Z,1516653779.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:59.140Z,1516653779.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:59.511Z,1516653779.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:42:59.936Z,1516653779.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:42:59.967Z,1516653779.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:00.293Z,1516653780.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:00.339Z,1516653780.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:00.683Z,1516653780.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:01.080Z,1516653781.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:01.135Z,1516653781.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:01.478Z,1516653781.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:01.890Z,1516653781.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:01.931Z,1516653781.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:02.292Z,1516653782.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:02.335Z,1516653782.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:02.692Z,1516653782.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:03.093Z,1516653783.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:03.131Z,1516653783.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:03.480Z,1516653783.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:03.892Z,1516653783.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:03.927Z,1516653783.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:04.288Z,1516653784.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:04.332Z,1516653784.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:04.689Z,1516653784.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:05.085Z,1516653785.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:05.127Z,1516653785.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:05.496Z,1516653785.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:05.900Z,1516653785.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:05.923Z,1516653785.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:06.303Z,1516653786.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:06.327Z,1516653786.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:06.696Z,1516653786.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:07.072Z,1516653787.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:07.124Z,1516653787.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:07.480Z,1516653787.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:07.889Z,1516653787.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:07.919Z,1516653787.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:08.286Z,1516653788.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:08.323Z,1516653788.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:08.686Z,1516653788.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:09.086Z,1516653789.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:09.119Z,1516653789.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:09.480Z,1516653789.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:09.888Z,1516653789.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:09.915Z,1516653789.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:10.284Z,1516653790.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:10.319Z,1516653790.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:10.683Z,1516653790.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:11.083Z,1516653791.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:11.116Z,1516653791.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:11.488Z,1516653791.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:11.913Z,1516653791.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:11.961Z,1516653791.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:12.298Z,1516653792.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:12.327Z,1516653792.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:12.688Z,1516653792.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:13.090Z,1516653793.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:13.124Z,1516653793.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:13.486Z,1516653793.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:13.921Z,1516653793.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:13.955Z,1516653793.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:14.302Z,1516653794.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:14.327Z,1516653794.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:14.690Z,1516653794.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:15.086Z,1516653795.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:15.124Z,1516653795.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:15.477Z,1516653795.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:15.886Z,1516653795.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:15.919Z,1516653795.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:16.287Z,1516653796.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:16.323Z,1516653796.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:16.684Z,1516653796.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:17.079Z,1516653797.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:17.119Z,1516653797.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:17.498Z,1516653797.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:17.900Z,1516653797.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:17.915Z,1516653797.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:18.303Z,1516653798.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:18.319Z,1516653798.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:18.672Z,1516653798.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:19.072Z,1516653799.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:19.115Z,1516653799.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:19.479Z,1516653799.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:19.892Z,1516653799.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:19.911Z,1516653799.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:20.297Z,1516653800.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:20.315Z,1516653800.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:20.692Z,1516653800.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:21.093Z,1516653801.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:21.127Z,1516653801.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:21.488Z,1516653801.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:21.892Z,1516653801.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:21.924Z,1516653801.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:22.288Z,1516653802.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:22.327Z,1516653802.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:22.692Z,1516653802.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:23.088Z,1516653803.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:23.124Z,1516653803.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:23.504Z,1516653803.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:23.900Z,1516653803.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:23.919Z,1516653803.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:24.302Z,1516653804.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:24.327Z,1516653804.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:24.696Z,1516653804.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:25.072Z,1516653805.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:25.124Z,1516653805.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:25.476Z,1516653805.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:25.876Z,1516653805.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:25.921Z,1516653805.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:26.294Z,1516653806.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:26.327Z,1516653806.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:26.692Z,1516653806.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:27.088Z,1516653807.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:27.124Z,1516653807.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:27.482Z,1516653807.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:27.884Z,1516653807.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:27.921Z,1516653807.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:28.288Z,1516653808.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:28.363Z,1516653808.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:28.685Z,1516653808.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:29.085Z,1516653809.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:29.159Z,1516653809.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:29.505Z,1516653809.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:29.900Z,1516653809.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:29.955Z,1516653809.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:30.302Z,1516653810.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:30.359Z,1516653810.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:30.688Z,1516653810.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:31.084Z,1516653811.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:31.156Z,1516653811.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:31.489Z,1516653811.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:31.891Z,1516653811.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:31.951Z,1516653811.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:32.301Z,1516653812.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:32.355Z,1516653812.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:32.696Z,1516653812.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:33.106Z,1516653813.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:33.151Z,1516653813.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:33.480Z,1516653813.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:33.871Z,1516653813.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:33.947Z,1516653813.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:34.277Z,1516653814.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:34.351Z,1516653814.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:34.681Z,1516653814.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:35.076Z,1516653815.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:35.147Z,1516653815.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:35.507Z,1516653815.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:35.905Z,1516653815.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:35.943Z,1516653815.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:36.303Z,1516653816.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:36.347Z,1516653816.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:36.682Z,1516653816.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:37.079Z,1516653817.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:37.144Z,1516653817.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:37.482Z,1516653817.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:37.892Z,1516653817.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:37.939Z,1516653817.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:38.291Z,1516653818.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:38.343Z,1516653818.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:38.693Z,1516653818.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:39.089Z,1516653819.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:39.139Z,1516653819.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:39.480Z,1516653819.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:39.882Z,1516653819.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:39.937Z,1516653819.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:40.288Z,1516653820.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:40.359Z,1516653820.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:40.684Z,1516653820.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:41.087Z,1516653821.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:41.156Z,1516653821.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:41.505Z,1516653821.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:41.900Z,1516653821.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:41.953Z,1516653821.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:42.292Z,1516653822.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:42.383Z,1516653822.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:42.678Z,1516653822.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:43.080Z,1516653823.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:43.179Z,1516653823.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:43.484Z,1516653823.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:43.879Z,1516653823.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:43.975Z,1516653823.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:44.294Z,1516653824.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:44.379Z,1516653824.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:44.687Z,1516653824.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:45.092Z,1516653825.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:45.175Z,1516653825.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:45.488Z,1516653825.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:45.873Z,1516653825.873 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:43:45.873Z,1516653825.873 [BPC1] Communications Fault, FailCount= 8
2018-01-22T20:43:45.874Z,1516653825.874 [BPC1](ERROR): Communications Fault
2018-01-22T20:43:45.888Z,1516653825.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:45.901Z,1516653825.901 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:43:45.971Z,1516653825.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:46.288Z,1516653826.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:46.375Z,1516653826.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:46.680Z,1516653826.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:47.080Z,1516653827.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:47.094Z,1516653827.094 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:43:47.094Z,1516653827.094 [BPC1] No Fault, FailCount= 8
2018-01-22T20:43:47.172Z,1516653827.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:47.544Z,1516653827.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:47.894Z,1516653827.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:47.969Z,1516653827.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:48.301Z,1516653828.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:48.371Z,1516653828.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:49.169Z,1516653829.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:49.963Z,1516653829.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:50.369Z,1516653830.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:51.163Z,1516653831.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:51.496Z,1516653831.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:51.632Z,1516653831.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:51.959Z,1516653831.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:51.975Z,1516653831.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:52.363Z,1516653832.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:52.384Z,1516653832.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:52.772Z,1516653832.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:53.159Z,1516653833.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:53.170Z,1516653833.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:53.568Z,1516653833.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:53.956Z,1516653833.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:54.027Z,1516653834.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:54.378Z,1516653834.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:54.411Z,1516653834.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:54.778Z,1516653834.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:55.177Z,1516653835.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:55.207Z,1516653835.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:55.562Z,1516653835.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:56.004Z,1516653836.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:56.045Z,1516653836.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:56.358Z,1516653836.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:56.407Z,1516653836.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:56.761Z,1516653836.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:57.155Z,1516653837.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:57.203Z,1516653837.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:57.572Z,1516653837.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:57.976Z,1516653837.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:57.999Z,1516653837.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:58.376Z,1516653838.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:58.403Z,1516653838.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:58.767Z,1516653838.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:59.166Z,1516653839.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:59.199Z,1516653839.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:43:59.568Z,1516653839.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:59.979Z,1516653839.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:43:59.995Z,1516653839.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:00.376Z,1516653840.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:00.399Z,1516653840.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:00.776Z,1516653840.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:01.176Z,1516653841.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:01.195Z,1516653841.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:01.571Z,1516653841.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:01.952Z,1516653841.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:01.991Z,1516653841.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:02.367Z,1516653842.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:02.395Z,1516653842.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:02.779Z,1516653842.779 [BPC1](INFO): Initialized
2018-01-22T20:44:02.799Z,1516653842.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:03.166Z,1516653843.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:03.191Z,1516653843.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:03.569Z,1516653843.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:03.976Z,1516653843.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:03.987Z,1516653843.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:04.372Z,1516653844.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:04.391Z,1516653844.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:04.770Z,1516653844.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:05.160Z,1516653845.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:05.188Z,1516653845.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:05.564Z,1516653845.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:05.960Z,1516653845.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:05.983Z,1516653845.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:06.373Z,1516653846.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:06.387Z,1516653846.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:06.773Z,1516653846.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:07.173Z,1516653847.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:07.183Z,1516653847.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:07.572Z,1516653847.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:07.993Z,1516653847.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:08.040Z,1516653848.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:08.356Z,1516653848.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:08.415Z,1516653848.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:08.756Z,1516653848.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:09.155Z,1516653849.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:09.212Z,1516653849.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:09.588Z,1516653849.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:10.009Z,1516653850.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:10.035Z,1516653850.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:10.388Z,1516653850.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:10.423Z,1516653850.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:10.760Z,1516653850.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:11.160Z,1516653851.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:11.219Z,1516653851.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:11.572Z,1516653851.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:11.966Z,1516653851.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:12.015Z,1516653852.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:12.376Z,1516653852.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:12.419Z,1516653852.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:12.768Z,1516653852.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:13.167Z,1516653853.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:13.215Z,1516653853.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:13.558Z,1516653853.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:13.964Z,1516653853.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:14.011Z,1516653854.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:14.369Z,1516653854.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:14.415Z,1516653854.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:14.761Z,1516653854.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:15.168Z,1516653855.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:15.211Z,1516653855.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:15.573Z,1516653855.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:15.979Z,1516653855.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:16.007Z,1516653856.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:16.366Z,1516653856.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:16.411Z,1516653856.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:16.760Z,1516653856.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:17.164Z,1516653857.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:17.207Z,1516653857.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:17.572Z,1516653857.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:17.966Z,1516653857.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:18.003Z,1516653858.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:18.376Z,1516653858.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:18.407Z,1516653858.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:18.768Z,1516653858.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:19.172Z,1516653859.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:19.203Z,1516653859.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:19.560Z,1516653859.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:19.968Z,1516653859.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:19.999Z,1516653859.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:20.361Z,1516653860.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:20.403Z,1516653860.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:20.767Z,1516653860.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:21.161Z,1516653861.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:21.199Z,1516653861.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:21.573Z,1516653861.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:21.997Z,1516653861.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:22.047Z,1516653862.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:22.376Z,1516653862.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:22.431Z,1516653862.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:22.767Z,1516653862.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:23.168Z,1516653863.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:23.227Z,1516653863.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:23.577Z,1516653863.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:23.953Z,1516653863.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:24.024Z,1516653864.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:24.382Z,1516653864.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:24.431Z,1516653864.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:24.788Z,1516653864.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:25.176Z,1516653865.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:25.227Z,1516653865.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:25.557Z,1516653865.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:25.961Z,1516653865.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:26.023Z,1516653866.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:26.357Z,1516653866.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:26.427Z,1516653866.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:26.760Z,1516653866.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:27.155Z,1516653867.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:27.223Z,1516653867.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:27.566Z,1516653867.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:27.986Z,1516653867.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:28.031Z,1516653868.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:28.386Z,1516653868.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:28.435Z,1516653868.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:28.763Z,1516653868.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:29.188Z,1516653869.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:29.231Z,1516653869.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:29.559Z,1516653869.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:29.964Z,1516653869.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:30.027Z,1516653870.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:30.374Z,1516653870.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:30.431Z,1516653870.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:30.770Z,1516653870.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:31.162Z,1516653871.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:31.227Z,1516653871.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:31.568Z,1516653871.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:31.968Z,1516653871.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:32.024Z,1516653872.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:32.359Z,1516653872.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:32.427Z,1516653872.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:32.759Z,1516653872.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:33.164Z,1516653873.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:33.223Z,1516653873.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:33.566Z,1516653873.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:33.966Z,1516653873.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:34.019Z,1516653874.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:34.366Z,1516653874.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:34.423Z,1516653874.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:34.759Z,1516653874.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:35.162Z,1516653875.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:35.219Z,1516653875.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:35.560Z,1516653875.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:35.958Z,1516653875.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:36.017Z,1516653876.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:36.380Z,1516653876.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:36.447Z,1516653876.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:36.774Z,1516653876.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:37.170Z,1516653877.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:37.243Z,1516653877.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:37.570Z,1516653877.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:37.972Z,1516653877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:38.041Z,1516653878.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:38.376Z,1516653878.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:38.447Z,1516653878.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:38.753Z,1516653878.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:39.193Z,1516653879.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:39.243Z,1516653879.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:39.567Z,1516653879.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:39.978Z,1516653879.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:40.039Z,1516653880.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:40.369Z,1516653880.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:40.443Z,1516653880.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:40.760Z,1516653880.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:41.162Z,1516653881.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:41.239Z,1516653881.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:41.561Z,1516653881.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:41.959Z,1516653881.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:42.036Z,1516653882.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:42.369Z,1516653882.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:42.439Z,1516653882.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:42.774Z,1516653882.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:43.169Z,1516653883.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:43.236Z,1516653883.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:43.568Z,1516653883.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:43.972Z,1516653883.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:44.031Z,1516653884.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:44.368Z,1516653884.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:44.435Z,1516653884.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:44.761Z,1516653884.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:45.164Z,1516653885.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:45.231Z,1516653885.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:45.579Z,1516653885.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:45.981Z,1516653885.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:46.027Z,1516653886.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:46.377Z,1516653886.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:46.431Z,1516653886.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:46.748Z,1516653886.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:47.151Z,1516653887.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:47.228Z,1516653887.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:47.583Z,1516653887.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:47.953Z,1516653887.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:48.023Z,1516653888.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:48.381Z,1516653888.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:48.427Z,1516653888.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:49.223Z,1516653889.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:50.021Z,1516653890.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:50.455Z,1516653890.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:51.251Z,1516653891.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:51.606Z,1516653891.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:51.752Z,1516653891.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:52.049Z,1516653892.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:52.173Z,1516653892.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:52.479Z,1516653892.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:52.512Z,1516653892.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:52.904Z,1516653892.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:53.275Z,1516653893.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:53.320Z,1516653893.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:53.775Z,1516653893.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:54.071Z,1516653894.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:54.101Z,1516653894.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:54.476Z,1516653894.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:54.499Z,1516653894.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:54.905Z,1516653894.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:55.271Z,1516653895.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:55.308Z,1516653895.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:55.761Z,1516653895.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:56.067Z,1516653896.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:56.135Z,1516653896.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:56.471Z,1516653896.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:56.508Z,1516653896.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:56.904Z,1516653896.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:57.268Z,1516653897.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:57.299Z,1516653897.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:57.753Z,1516653897.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:58.064Z,1516653898.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:58.116Z,1516653898.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:58.467Z,1516653898.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:58.520Z,1516653898.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:58.909Z,1516653898.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:59.263Z,1516653899.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:44:59.312Z,1516653899.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:44:59.758Z,1516653899.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:00.059Z,1516653900.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:00.093Z,1516653900.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:00.464Z,1516653900.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:00.492Z,1516653900.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:00.893Z,1516653900.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:01.259Z,1516653901.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:01.296Z,1516653901.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:01.702Z,1516653901.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:02.055Z,1516653902.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:02.124Z,1516653902.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:02.459Z,1516653902.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:02.510Z,1516653902.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:02.895Z,1516653902.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:03.255Z,1516653903.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:03.308Z,1516653903.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:03.700Z,1516653903.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:04.053Z,1516653904.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:04.149Z,1516653904.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:04.503Z,1516653904.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:04.520Z,1516653904.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:04.912Z,1516653904.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:05.299Z,1516653905.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:05.322Z,1516653905.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:05.707Z,1516653905.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:06.096Z,1516653906.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:06.138Z,1516653906.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:06.512Z,1516653906.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:06.531Z,1516653906.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:06.893Z,1516653906.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:07.296Z,1516653907.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:07.327Z,1516653907.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:07.742Z,1516653907.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:08.108Z,1516653908.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:08.123Z,1516653908.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:08.504Z,1516653908.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:08.527Z,1516653908.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:08.904Z,1516653908.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:09.302Z,1516653909.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:09.323Z,1516653909.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:09.696Z,1516653909.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:10.096Z,1516653910.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:10.119Z,1516653910.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:10.514Z,1516653910.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:10.523Z,1516653910.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:10.909Z,1516653910.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:11.310Z,1516653911.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:11.319Z,1516653911.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:11.699Z,1516653911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:12.087Z,1516653912.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:12.115Z,1516653912.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:12.492Z,1516653912.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:12.519Z,1516653912.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:12.897Z,1516653912.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:13.292Z,1516653913.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:13.315Z,1516653913.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:13.764Z,1516653913.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:14.108Z,1516653914.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:14.112Z,1516653914.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:14.512Z,1516653914.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:14.515Z,1516653914.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:14.897Z,1516653914.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:15.311Z,1516653915.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:15.313Z,1516653915.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:15.699Z,1516653915.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:16.104Z,1516653916.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:16.107Z,1516653916.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:16.511Z,1516653916.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:16.521Z,1516653916.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:16.910Z,1516653916.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:17.307Z,1516653917.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:17.311Z,1516653917.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:17.708Z,1516653917.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:18.107Z,1516653918.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:18.142Z,1516653918.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:18.501Z,1516653918.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:18.515Z,1516653918.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:18.896Z,1516653918.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:19.295Z,1516653919.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:19.312Z,1516653919.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:19.702Z,1516653919.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:20.108Z,1516653920.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:20.157Z,1516653920.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:20.505Z,1516653920.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:20.540Z,1516653920.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:20.895Z,1516653920.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:21.309Z,1516653921.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:21.336Z,1516653921.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:21.704Z,1516653921.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:22.105Z,1516653922.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:22.147Z,1516653922.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:22.522Z,1516653922.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:22.551Z,1516653922.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:22.908Z,1516653922.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:23.308Z,1516653923.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:23.347Z,1516653923.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:23.703Z,1516653923.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:24.092Z,1516653924.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:24.143Z,1516653924.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:24.500Z,1516653924.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:24.547Z,1516653924.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:24.892Z,1516653924.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:25.291Z,1516653925.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:25.343Z,1516653925.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:25.702Z,1516653925.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:26.116Z,1516653926.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:26.139Z,1516653926.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:26.508Z,1516653926.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:26.543Z,1516653926.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:26.895Z,1516653926.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:27.304Z,1516653927.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:27.339Z,1516653927.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:27.708Z,1516653927.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:28.103Z,1516653928.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:28.135Z,1516653928.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:28.510Z,1516653928.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:28.539Z,1516653928.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:28.914Z,1516653928.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:29.315Z,1516653929.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:29.335Z,1516653929.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:29.710Z,1516653929.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:30.105Z,1516653930.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:30.131Z,1516653930.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:30.500Z,1516653930.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:30.535Z,1516653930.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:30.889Z,1516653930.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:31.292Z,1516653931.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:31.331Z,1516653931.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:31.716Z,1516653931.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:32.129Z,1516653932.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:32.176Z,1516653932.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:32.516Z,1516653932.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:32.567Z,1516653932.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:32.917Z,1516653932.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:33.291Z,1516653933.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:33.363Z,1516653933.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:33.696Z,1516653933.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:34.159Z,1516653934.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:34.188Z,1516653934.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:34.509Z,1516653934.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:34.563Z,1516653934.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:34.908Z,1516653934.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:35.316Z,1516653935.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:35.359Z,1516653935.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:35.706Z,1516653935.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:36.100Z,1516653936.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:36.155Z,1516653936.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:36.500Z,1516653936.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:36.559Z,1516653936.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:36.908Z,1516653936.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:37.299Z,1516653937.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:37.355Z,1516653937.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:37.708Z,1516653937.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:37.709Z,1516653937.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-01-22T20:45:37.709Z,1516653937.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:45:37.711Z,1516653937.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:37.711Z,1516653937.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-01-22T20:45:37.711Z,1516653937.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:45:37.713Z,1516653937.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:37.713Z,1516653937.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-01-22T20:45:37.713Z,1516653937.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:45:37.725Z,1516653937.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:45:37.725Z,1516653937.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:45:37.725Z,1516653937.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:45:38.131Z,1516653938.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:45:38.131Z,1516653938.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-01-22T20:45:38.131Z,1516653938.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:45:38.131Z,1516653938.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-01-22T20:45:38.132Z,1516653938.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:45:38.132Z,1516653938.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-01-22T20:45:38.155Z,1516653938.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:38.515Z,1516653938.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:45:38.515Z,1516653938.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:45:38.516Z,1516653938.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:45:38.516Z,1516653938.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:45:38.516Z,1516653938.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:45:38.517Z,1516653938.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:45:38.517Z,1516653938.517 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:45:38.517Z,1516653938.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:45:38.518Z,1516653938.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:45:38.559Z,1516653938.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:38.912Z,1516653938.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:39.292Z,1516653939.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:39.355Z,1516653939.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:39.704Z,1516653939.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:40.104Z,1516653940.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:40.151Z,1516653940.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:40.502Z,1516653940.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:40.555Z,1516653940.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:40.908Z,1516653940.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:41.302Z,1516653941.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:41.351Z,1516653941.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:41.697Z,1516653941.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:42.093Z,1516653942.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:42.147Z,1516653942.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:42.494Z,1516653942.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:42.551Z,1516653942.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:42.893Z,1516653942.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:43.292Z,1516653943.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:43.347Z,1516653943.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:43.704Z,1516653943.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:44.110Z,1516653944.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:44.143Z,1516653944.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:44.508Z,1516653944.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:44.547Z,1516653944.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:44.905Z,1516653944.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:45.307Z,1516653945.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:45.343Z,1516653945.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:45.700Z,1516653945.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:46.140Z,1516653946.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:46.149Z,1516653946.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:46.519Z,1516653946.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:46.563Z,1516653946.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:46.909Z,1516653946.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:47.312Z,1516653947.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:47.359Z,1516653947.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:47.708Z,1516653947.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:47.711Z,1516653947.711 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:45:47.712Z,1516653947.712 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:45:47.712Z,1516653947.712 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:45:47.712Z,1516653947.712 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:45:48.084Z,1516653948.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:48.100Z,1516653948.100 [Default:CheckIn:D] Stopped
2018-01-22T20:45:48.100Z,1516653948.100 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:45:48.156Z,1516653948.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:48.501Z,1516653948.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.390186 min 
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn:E] Stopped
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn] Stopped
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn](INFO): Running loop #15
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn] Running Loop=15
2018-01-22T20:45:48.509Z,1516653948.509 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:45:48.510Z,1516653948.510 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:45:48.532Z,1516653948.532 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:45:48.563Z,1516653948.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:49.359Z,1516653949.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:50.155Z,1516653950.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:50.559Z,1516653950.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:51.355Z,1516653951.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:51.753Z,1516653951.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:51.924Z,1516653951.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:52.151Z,1516653952.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:52.317Z,1516653952.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:52.555Z,1516653952.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:52.726Z,1516653952.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:53.116Z,1516653953.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:53.351Z,1516653953.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:53.501Z,1516653953.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:53.903Z,1516653953.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:54.147Z,1516653954.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:54.301Z,1516653954.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:54.551Z,1516653954.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:54.708Z,1516653954.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:55.109Z,1516653955.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:55.347Z,1516653955.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:55.508Z,1516653955.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:55.920Z,1516653955.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:56.143Z,1516653956.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:56.288Z,1516653956.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:56.547Z,1516653956.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:56.692Z,1516653956.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:57.092Z,1516653957.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:57.343Z,1516653957.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:57.519Z,1516653957.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:57.947Z,1516653957.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:58.139Z,1516653958.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:58.318Z,1516653958.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:58.543Z,1516653958.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:58.696Z,1516653958.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:59.090Z,1516653959.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:59.339Z,1516653959.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:45:59.500Z,1516653959.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:45:59.896Z,1516653959.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:00.137Z,1516653960.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:00.292Z,1516653960.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:00.559Z,1516653960.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:00.706Z,1516653960.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:01.124Z,1516653961.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:01.355Z,1516653961.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:01.502Z,1516653961.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:01.900Z,1516653961.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:02.155Z,1516653962.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:02.295Z,1516653962.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:02.579Z,1516653962.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:02.698Z,1516653962.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:03.093Z,1516653963.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:03.375Z,1516653963.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:03.502Z,1516653963.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:03.902Z,1516653963.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:04.172Z,1516653964.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:04.317Z,1516653964.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:04.575Z,1516653964.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:04.696Z,1516653964.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:05.095Z,1516653965.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:05.371Z,1516653965.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:05.496Z,1516653965.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:05.913Z,1516653965.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:06.169Z,1516653966.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:06.295Z,1516653966.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:06.571Z,1516653966.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:06.716Z,1516653966.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:07.121Z,1516653967.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:07.367Z,1516653967.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:07.519Z,1516653967.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:07.918Z,1516653967.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:08.163Z,1516653968.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:08.313Z,1516653968.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:08.567Z,1516653968.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:08.689Z,1516653968.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:09.092Z,1516653969.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:09.363Z,1516653969.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:09.519Z,1516653969.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:09.921Z,1516653969.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:10.159Z,1516653970.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:10.318Z,1516653970.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:10.563Z,1516653970.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:10.693Z,1516653970.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:11.097Z,1516653971.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:11.359Z,1516653971.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:11.492Z,1516653971.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:12.005Z,1516653972.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:12.155Z,1516653972.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:12.300Z,1516653972.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:12.559Z,1516653972.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:12.714Z,1516653972.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:13.106Z,1516653973.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:13.355Z,1516653973.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:13.511Z,1516653973.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:13.902Z,1516653973.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:14.153Z,1516653974.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:14.308Z,1516653974.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:14.579Z,1516653974.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:14.701Z,1516653974.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:15.101Z,1516653975.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:15.375Z,1516653975.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:15.506Z,1516653975.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:15.908Z,1516653975.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:16.173Z,1516653976.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:16.305Z,1516653976.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:16.603Z,1516653976.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:16.707Z,1516653976.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:17.101Z,1516653977.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:17.399Z,1516653977.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:17.503Z,1516653977.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:17.929Z,1516653977.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:18.195Z,1516653978.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:18.296Z,1516653978.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:18.599Z,1516653978.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:18.712Z,1516653978.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:19.113Z,1516653979.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:19.395Z,1516653979.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:19.516Z,1516653979.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:19.929Z,1516653979.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:20.193Z,1516653980.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:20.297Z,1516653980.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:20.595Z,1516653980.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:20.692Z,1516653980.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:21.092Z,1516653981.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:21.391Z,1516653981.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:21.514Z,1516653981.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:21.951Z,1516653981.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:22.187Z,1516653982.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:22.310Z,1516653982.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:22.591Z,1516653982.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:22.699Z,1516653982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:23.096Z,1516653983.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:23.387Z,1516653983.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:23.496Z,1516653983.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:23.926Z,1516653983.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:24.183Z,1516653984.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:24.296Z,1516653984.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:24.587Z,1516653984.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:24.711Z,1516653984.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:25.115Z,1516653985.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:25.383Z,1516653985.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:25.516Z,1516653985.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:25.961Z,1516653985.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:26.179Z,1516653986.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:26.312Z,1516653986.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:26.583Z,1516653986.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:26.701Z,1516653986.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:27.096Z,1516653987.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:27.379Z,1516653987.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:27.514Z,1516653987.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:27.909Z,1516653987.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:28.177Z,1516653988.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:28.305Z,1516653988.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:28.611Z,1516653988.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:28.708Z,1516653988.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:29.101Z,1516653989.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:29.407Z,1516653989.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:29.518Z,1516653989.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:29.921Z,1516653989.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:30.205Z,1516653990.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:30.317Z,1516653990.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:30.611Z,1516653990.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:30.699Z,1516653990.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:31.104Z,1516653991.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:31.407Z,1516653991.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:31.488Z,1516653991.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:31.964Z,1516653991.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:32.203Z,1516653992.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:32.305Z,1516653992.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:32.607Z,1516653992.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:32.706Z,1516653992.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:33.120Z,1516653993.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:33.403Z,1516653993.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:33.524Z,1516653993.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:33.967Z,1516653993.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:34.201Z,1516653994.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:34.300Z,1516653994.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:34.607Z,1516653994.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:34.703Z,1516653994.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:35.093Z,1516653995.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:35.403Z,1516653995.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:35.503Z,1516653995.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:35.945Z,1516653995.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:36.199Z,1516653996.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:36.309Z,1516653996.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:36.603Z,1516653996.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:36.702Z,1516653996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:37.104Z,1516653997.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:37.399Z,1516653997.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:37.500Z,1516653997.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:37.961Z,1516653997.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:38.195Z,1516653998.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:38.293Z,1516653998.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:38.599Z,1516653998.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:38.712Z,1516653998.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:39.119Z,1516653999.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:39.395Z,1516653999.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:39.520Z,1516653999.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:39.962Z,1516653999.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:40.191Z,1516654000.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:40.295Z,1516654000.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:40.595Z,1516654000.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:40.696Z,1516654000.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:41.095Z,1516654001.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:41.392Z,1516654001.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:41.502Z,1516654001.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:41.901Z,1516654001.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:42.187Z,1516654002.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:42.319Z,1516654002.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:42.639Z,1516654002.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:42.703Z,1516654002.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:43.104Z,1516654003.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:43.438Z,1516654003.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:43.504Z,1516654003.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:43.900Z,1516654003.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:44.233Z,1516654004.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:44.321Z,1516654004.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:44.639Z,1516654004.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:44.702Z,1516654004.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:45.101Z,1516654005.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:45.435Z,1516654005.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:45.519Z,1516654005.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:45.979Z,1516654005.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:46.231Z,1516654006.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:46.305Z,1516654006.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:46.635Z,1516654006.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:46.698Z,1516654006.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:47.104Z,1516654007.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:47.431Z,1516654007.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:47.504Z,1516654007.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:47.971Z,1516654007.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:48.227Z,1516654008.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:48.320Z,1516654008.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:48.631Z,1516654008.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:48.721Z,1516654008.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:49.427Z,1516654009.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:50.225Z,1516654010.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:50.631Z,1516654010.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:51.427Z,1516654011.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:52.224Z,1516654012.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:52.627Z,1516654012.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:53.425Z,1516654013.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:54.219Z,1516654014.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:54.389Z,1516654014.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:54.521Z,1516654014.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:54.623Z,1516654014.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:54.912Z,1516654014.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:55.308Z,1516654015.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:55.419Z,1516654015.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:55.680Z,1516654015.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:56.128Z,1516654016.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:56.217Z,1516654016.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:56.496Z,1516654016.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:56.655Z,1516654016.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:56.925Z,1516654016.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:57.320Z,1516654017.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:57.453Z,1516654017.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:57.732Z,1516654017.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:58.118Z,1516654018.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:58.249Z,1516654018.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:58.521Z,1516654018.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:58.707Z,1516654018.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:58.912Z,1516654018.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:59.319Z,1516654019.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:46:59.504Z,1516654019.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:46:59.717Z,1516654019.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:00.116Z,1516654020.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:00.299Z,1516654020.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:00.513Z,1516654020.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:00.703Z,1516654020.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:00.913Z,1516654020.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:01.340Z,1516654021.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:01.500Z,1516654021.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:01.701Z,1516654021.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:02.089Z,1516654022.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:02.295Z,1516654022.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:02.496Z,1516654022.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:02.699Z,1516654022.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:02.909Z,1516654022.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:03.300Z,1516654023.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:03.495Z,1516654023.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:03.688Z,1516654023.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:04.078Z,1516654024.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:04.291Z,1516654024.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:04.498Z,1516654024.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:04.695Z,1516654024.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:04.915Z,1516654024.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:05.300Z,1516654025.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:05.493Z,1516654025.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:05.690Z,1516654025.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:06.106Z,1516654026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:06.287Z,1516654026.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:06.496Z,1516654026.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:06.691Z,1516654026.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:06.920Z,1516654026.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:07.290Z,1516654027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:07.487Z,1516654027.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:07.713Z,1516654027.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:08.098Z,1516654028.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:08.283Z,1516654028.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:08.544Z,1516654028.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:08.687Z,1516654028.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:08.888Z,1516654028.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:09.288Z,1516654029.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:09.483Z,1516654029.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:09.705Z,1516654029.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:10.092Z,1516654030.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:10.281Z,1516654030.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:10.496Z,1516654030.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:10.707Z,1516654030.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:10.936Z,1516654030.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:11.304Z,1516654031.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:11.503Z,1516654031.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:11.696Z,1516654031.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:12.095Z,1516654032.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:12.301Z,1516654032.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:12.510Z,1516654032.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:12.711Z,1516654032.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:12.900Z,1516654032.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:13.264Z,1516654033.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:13.507Z,1516654033.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:13.697Z,1516654033.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:14.112Z,1516654034.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:14.303Z,1516654034.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:14.505Z,1516654034.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:14.707Z,1516654034.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:14.871Z,1516654034.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:15.307Z,1516654035.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:15.503Z,1516654035.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:15.670Z,1516654035.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:16.084Z,1516654036.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:16.299Z,1516654036.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:16.475Z,1516654036.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:16.703Z,1516654036.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:16.904Z,1516654036.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:17.322Z,1516654037.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:17.501Z,1516654037.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:17.707Z,1516654037.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:18.080Z,1516654038.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:18.295Z,1516654038.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:18.491Z,1516654038.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:18.699Z,1516654038.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:18.872Z,1516654038.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:19.284Z,1516654039.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:19.495Z,1516654039.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:19.704Z,1516654039.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:20.096Z,1516654040.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:20.291Z,1516654040.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:20.520Z,1516654040.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:20.695Z,1516654040.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:20.873Z,1516654040.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:21.303Z,1516654041.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:21.491Z,1516654041.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:21.672Z,1516654041.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:22.123Z,1516654042.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:22.287Z,1516654042.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:22.480Z,1516654042.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:22.691Z,1516654042.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:22.901Z,1516654042.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:23.297Z,1516654043.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:23.487Z,1516654043.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:23.688Z,1516654043.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:24.083Z,1516654044.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:24.285Z,1516654044.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:24.481Z,1516654044.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:24.703Z,1516654044.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:24.882Z,1516654044.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:25.284Z,1516654045.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:25.499Z,1516654045.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:25.687Z,1516654045.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:26.088Z,1516654046.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:26.297Z,1516654046.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:26.487Z,1516654046.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:26.703Z,1516654046.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:26.881Z,1516654046.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:27.282Z,1516654047.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:27.499Z,1516654047.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:27.684Z,1516654047.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:28.082Z,1516654048.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:28.295Z,1516654048.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:28.481Z,1516654048.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:28.699Z,1516654048.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:28.890Z,1516654048.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:29.284Z,1516654049.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:29.495Z,1516654049.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:29.689Z,1516654049.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:30.064Z,1516654050.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:30.291Z,1516654050.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:30.469Z,1516654050.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:30.695Z,1516654050.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:30.865Z,1516654050.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:31.272Z,1516654051.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:31.491Z,1516654051.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:31.687Z,1516654051.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:32.101Z,1516654052.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:32.287Z,1516654052.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:32.502Z,1516654052.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:32.692Z,1516654052.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:32.876Z,1516654052.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:33.270Z,1516654053.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:33.488Z,1516654053.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:33.678Z,1516654053.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:34.076Z,1516654054.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:34.283Z,1516654054.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:34.479Z,1516654054.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:34.687Z,1516654054.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:34.892Z,1516654054.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:35.284Z,1516654055.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:35.483Z,1516654055.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:35.692Z,1516654055.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:36.092Z,1516654056.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:36.279Z,1516654056.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:36.480Z,1516654056.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:36.683Z,1516654056.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:36.881Z,1516654056.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:37.280Z,1516654057.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:37.479Z,1516654057.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:37.686Z,1516654057.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:38.096Z,1516654058.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:38.275Z,1516654058.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:38.496Z,1516654058.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:38.715Z,1516654058.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:38.877Z,1516654058.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:39.277Z,1516654059.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:39.513Z,1516654059.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:39.680Z,1516654059.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:40.078Z,1516654060.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:40.309Z,1516654060.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:40.477Z,1516654060.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:40.731Z,1516654060.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:40.889Z,1516654060.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:41.286Z,1516654061.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:41.527Z,1516654061.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:41.696Z,1516654061.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:42.092Z,1516654062.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:42.326Z,1516654062.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:42.481Z,1516654062.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:42.731Z,1516654062.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:42.869Z,1516654062.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:43.272Z,1516654063.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:43.530Z,1516654063.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:43.694Z,1516654063.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:44.101Z,1516654064.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:44.324Z,1516654064.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:44.501Z,1516654064.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:44.727Z,1516654064.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:44.872Z,1516654064.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:45.272Z,1516654065.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:45.524Z,1516654065.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:45.672Z,1516654065.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:46.078Z,1516654066.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:46.319Z,1516654066.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:46.475Z,1516654066.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:46.723Z,1516654066.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:46.881Z,1516654066.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:47.284Z,1516654067.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:47.519Z,1516654067.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:47.688Z,1516654067.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:48.077Z,1516654068.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:48.315Z,1516654068.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:48.485Z,1516654068.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:48.719Z,1516654068.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:48.876Z,1516654068.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:49.515Z,1516654069.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:50.311Z,1516654070.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:50.715Z,1516654070.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:51.511Z,1516654071.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:52.237Z,1516654072.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:52.309Z,1516654072.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:52.444Z,1516654072.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:52.716Z,1516654072.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:52.747Z,1516654072.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:53.127Z,1516654073.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:53.508Z,1516654073.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:53.543Z,1516654073.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:53.908Z,1516654073.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:54.341Z,1516654074.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:54.369Z,1516654074.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:54.720Z,1516654074.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:54.763Z,1516654074.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:55.127Z,1516654075.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:55.521Z,1516654075.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:55.559Z,1516654075.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:55.900Z,1516654075.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:56.324Z,1516654076.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:56.371Z,1516654076.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:56.700Z,1516654076.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:56.775Z,1516654076.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:57.100Z,1516654077.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:57.504Z,1516654077.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:57.571Z,1516654077.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:57.910Z,1516654077.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:58.331Z,1516654078.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:58.383Z,1516654078.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:58.708Z,1516654078.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:58.787Z,1516654078.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:59.108Z,1516654079.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:59.504Z,1516654079.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:47:59.583Z,1516654079.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:47:59.908Z,1516654079.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:00.308Z,1516654080.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:00.379Z,1516654080.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:00.720Z,1516654080.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:00.783Z,1516654080.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:01.116Z,1516654081.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:01.512Z,1516654081.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:01.579Z,1516654081.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:01.913Z,1516654081.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:02.308Z,1516654082.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:02.376Z,1516654082.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:02.710Z,1516654082.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:02.779Z,1516654082.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:03.107Z,1516654083.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:03.506Z,1516654083.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:03.575Z,1516654083.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:03.921Z,1516654083.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:04.318Z,1516654084.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:04.371Z,1516654084.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:04.717Z,1516654084.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:04.775Z,1516654084.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:05.110Z,1516654085.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:05.511Z,1516654085.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:05.571Z,1516654085.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:05.908Z,1516654085.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:06.309Z,1516654086.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:06.369Z,1516654086.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:06.727Z,1516654086.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:06.783Z,1516654086.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:07.123Z,1516654087.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:07.519Z,1516654087.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:07.579Z,1516654087.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:07.912Z,1516654087.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:08.312Z,1516654088.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:08.377Z,1516654088.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:08.718Z,1516654088.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:08.783Z,1516654088.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:09.105Z,1516654089.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:09.516Z,1516654089.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:09.579Z,1516654089.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:09.929Z,1516654089.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:10.310Z,1516654090.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:10.375Z,1516654090.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:10.710Z,1516654090.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:10.779Z,1516654090.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:11.109Z,1516654091.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:11.503Z,1516654091.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:11.575Z,1516654091.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:11.904Z,1516654091.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:12.308Z,1516654092.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:12.372Z,1516654092.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:12.709Z,1516654092.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:12.775Z,1516654092.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:13.110Z,1516654093.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:13.510Z,1516654093.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:13.573Z,1516654093.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:13.910Z,1516654093.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:14.301Z,1516654094.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:14.367Z,1516654094.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:14.716Z,1516654094.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:14.771Z,1516654094.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:15.103Z,1516654095.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:15.502Z,1516654095.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:15.568Z,1516654095.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:15.917Z,1516654095.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:16.316Z,1516654096.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:16.363Z,1516654096.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:16.717Z,1516654096.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:16.767Z,1516654096.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:17.112Z,1516654097.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:17.513Z,1516654097.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:17.563Z,1516654097.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:17.914Z,1516654097.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:18.312Z,1516654098.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:18.359Z,1516654098.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:18.724Z,1516654098.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:18.763Z,1516654098.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:19.117Z,1516654099.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:19.517Z,1516654099.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:19.559Z,1516654099.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:19.916Z,1516654099.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:20.316Z,1516654100.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:20.356Z,1516654100.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:20.720Z,1516654100.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:20.795Z,1516654100.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:21.093Z,1516654101.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:21.496Z,1516654101.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:21.591Z,1516654101.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:21.920Z,1516654101.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:22.332Z,1516654102.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:22.389Z,1516654102.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:22.706Z,1516654102.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:22.803Z,1516654102.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:23.108Z,1516654103.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:23.503Z,1516654103.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:23.599Z,1516654103.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:23.903Z,1516654103.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:24.308Z,1516654104.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:24.395Z,1516654104.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:24.710Z,1516654104.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:24.799Z,1516654104.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:25.109Z,1516654105.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:25.510Z,1516654105.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:25.595Z,1516654105.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:25.910Z,1516654105.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:26.312Z,1516654106.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:26.391Z,1516654106.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:26.720Z,1516654106.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:26.795Z,1516654106.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:27.112Z,1516654107.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:27.503Z,1516654107.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:27.591Z,1516654107.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:27.910Z,1516654107.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:28.341Z,1516654108.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:28.387Z,1516654108.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:28.710Z,1516654108.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:28.791Z,1516654108.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:29.120Z,1516654109.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:29.502Z,1516654109.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:29.587Z,1516654109.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:29.908Z,1516654109.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:30.312Z,1516654110.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:30.383Z,1516654110.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:30.717Z,1516654110.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:30.787Z,1516654110.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:31.118Z,1516654111.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:31.522Z,1516654111.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:31.584Z,1516654111.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:31.904Z,1516654111.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:32.316Z,1516654112.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:32.379Z,1516654112.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:32.712Z,1516654112.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:32.784Z,1516654112.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:33.115Z,1516654113.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:33.516Z,1516654113.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:33.579Z,1516654113.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:33.921Z,1516654113.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:34.327Z,1516654114.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:34.377Z,1516654114.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:34.706Z,1516654114.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:34.803Z,1516654114.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:35.104Z,1516654115.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:35.504Z,1516654115.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:35.599Z,1516654115.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:35.904Z,1516654115.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:36.304Z,1516654116.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:36.397Z,1516654116.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:36.724Z,1516654116.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:36.812Z,1516654116.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:37.130Z,1516654117.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:37.533Z,1516654117.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:37.607Z,1516654117.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:37.903Z,1516654117.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:38.331Z,1516654118.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:38.403Z,1516654118.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:38.732Z,1516654118.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:38.732Z,1516654118.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-01-22T20:48:38.732Z,1516654118.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:48:38.734Z,1516654118.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:38.734Z,1516654118.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-01-22T20:48:38.734Z,1516654118.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:48:38.741Z,1516654118.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:38.741Z,1516654118.741 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-01-22T20:48:38.741Z,1516654118.741 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:48:38.762Z,1516654118.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:48:38.762Z,1516654118.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:48:38.762Z,1516654118.762 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:48:38.807Z,1516654118.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:39.125Z,1516654119.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:48:39.125Z,1516654119.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-01-22T20:48:39.126Z,1516654119.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:48:39.126Z,1516654119.126 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-01-22T20:48:39.131Z,1516654119.131 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:48:39.131Z,1516654119.131 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-01-22T20:48:39.502Z,1516654119.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:48:39.502Z,1516654119.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:48:39.507Z,1516654119.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:48:39.507Z,1516654119.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:48:39.508Z,1516654119.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:48:39.508Z,1516654119.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:48:39.508Z,1516654119.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:48:39.509Z,1516654119.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:48:39.509Z,1516654119.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:48:39.603Z,1516654119.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:39.922Z,1516654119.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:40.316Z,1516654120.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:40.399Z,1516654120.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:40.713Z,1516654120.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:40.803Z,1516654120.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:41.112Z,1516654121.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:41.513Z,1516654121.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:41.599Z,1516654121.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:41.914Z,1516654121.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:42.313Z,1516654122.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:42.395Z,1516654122.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:42.715Z,1516654122.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:42.799Z,1516654122.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:43.128Z,1516654123.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:43.522Z,1516654123.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:43.595Z,1516654123.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:43.906Z,1516654123.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:44.306Z,1516654124.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:44.391Z,1516654124.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:44.717Z,1516654124.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:44.795Z,1516654124.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:45.106Z,1516654125.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:45.513Z,1516654125.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:45.591Z,1516654125.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:45.928Z,1516654125.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:46.319Z,1516654126.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:46.387Z,1516654126.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:46.722Z,1516654126.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:47.124Z,1516654127.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:47.183Z,1516654127.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:47.496Z,1516654127.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:47.587Z,1516654127.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:47.900Z,1516654127.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:48.300Z,1516654128.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:48.385Z,1516654128.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:48.737Z,1516654128.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:48.811Z,1516654128.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:49.110Z,1516654129.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:49.607Z,1516654129.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:50.405Z,1516654130.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:50.839Z,1516654130.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:51.635Z,1516654131.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:52.431Z,1516654132.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:52.530Z,1516654132.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:52.655Z,1516654132.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:52.835Z,1516654132.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:53.008Z,1516654133.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:53.400Z,1516654133.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:53.631Z,1516654133.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:53.802Z,1516654133.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:54.200Z,1516654134.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:54.427Z,1516654134.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:54.608Z,1516654134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:54.831Z,1516654134.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:55.008Z,1516654135.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:55.408Z,1516654135.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:55.627Z,1516654135.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:55.812Z,1516654135.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:56.200Z,1516654136.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:56.426Z,1516654136.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:56.593Z,1516654136.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:56.831Z,1516654136.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:57.009Z,1516654137.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:57.396Z,1516654137.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:57.627Z,1516654137.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:57.811Z,1516654137.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:58.210Z,1516654138.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:58.425Z,1516654138.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:58.616Z,1516654138.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:58.831Z,1516654138.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:58.000Z,1516654139.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:59.403Z,1516654139.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:48:59.628Z,1516654139.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:48:59.800Z,1516654139.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:00.220Z,1516654140.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:00.425Z,1516654140.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:00.603Z,1516654140.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:00.827Z,1516654140.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:01.011Z,1516654141.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:01.412Z,1516654141.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:01.625Z,1516654141.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:01.809Z,1516654141.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:02.196Z,1516654142.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:02.432Z,1516654142.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:02.595Z,1516654142.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:02.843Z,1516654142.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:02.999Z,1516654142.999 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:49:02.999Z,1516654142.999 [BPC1] Communications Fault, FailCount= 9
2018-01-22T20:49:02.999Z,1516654142.999 [BPC1](ERROR): Communications Fault
2018-01-22T20:49:03.006Z,1516654143.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:03.019Z,1516654143.019 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:49:03.396Z,1516654143.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:03.639Z,1516654143.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:03.814Z,1516654143.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:04.218Z,1516654144.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:04.231Z,1516654144.231 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:49:04.231Z,1516654144.231 [BPC1] No Fault, FailCount= 9
2018-01-22T20:49:04.437Z,1516654144.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:04.652Z,1516654144.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:04.843Z,1516654144.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:05.008Z,1516654145.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:05.412Z,1516654145.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:05.639Z,1516654145.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:05.787Z,1516654145.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:06.213Z,1516654146.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:06.435Z,1516654146.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:06.592Z,1516654146.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:06.839Z,1516654146.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:07.018Z,1516654147.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:07.416Z,1516654147.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:07.635Z,1516654147.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:07.838Z,1516654147.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:08.196Z,1516654148.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:08.431Z,1516654148.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:08.596Z,1516654148.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:08.835Z,1516654148.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:08.995Z,1516654148.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:09.403Z,1516654149.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:09.631Z,1516654149.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:09.802Z,1516654149.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:10.202Z,1516654150.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:10.427Z,1516654150.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:10.613Z,1516654150.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:10.831Z,1516654150.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:11.005Z,1516654151.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:11.401Z,1516654151.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:11.627Z,1516654151.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:11.803Z,1516654151.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:12.198Z,1516654152.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:12.425Z,1516654152.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:12.608Z,1516654152.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:12.831Z,1516654152.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:13.016Z,1516654153.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:13.415Z,1516654153.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:13.627Z,1516654153.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:13.807Z,1516654153.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:14.244Z,1516654154.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:14.425Z,1516654154.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:14.613Z,1516654154.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:14.831Z,1516654154.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:14.000Z,1516654155.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:15.398Z,1516654155.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:15.629Z,1516654155.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:15.814Z,1516654155.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:16.209Z,1516654156.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:16.453Z,1516654156.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:16.616Z,1516654156.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:16.867Z,1516654156.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:17.001Z,1516654157.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:17.403Z,1516654157.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:17.663Z,1516654157.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:17.792Z,1516654157.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:18.200Z,1516654158.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:18.461Z,1516654158.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:18.612Z,1516654158.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:18.867Z,1516654158.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:19.014Z,1516654159.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:19.412Z,1516654159.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:19.663Z,1516654159.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:19.827Z,1516654159.827 [BPC1](INFO): Initialized
2018-01-22T20:49:19.857Z,1516654159.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:20.217Z,1516654160.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:20.459Z,1516654160.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:20.592Z,1516654160.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:20.863Z,1516654160.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:20.996Z,1516654160.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:21.388Z,1516654161.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:21.660Z,1516654161.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:21.814Z,1516654161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:22.218Z,1516654162.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:22.455Z,1516654162.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:22.614Z,1516654162.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:22.859Z,1516654162.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:23.000Z,1516654163.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:23.391Z,1516654163.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:23.657Z,1516654163.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:23.796Z,1516654163.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:24.226Z,1516654164.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:24.451Z,1516654164.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:24.600Z,1516654164.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:24.857Z,1516654164.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:25.023Z,1516654165.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:25.422Z,1516654165.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:25.651Z,1516654165.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:25.808Z,1516654165.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:26.208Z,1516654166.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:26.447Z,1516654166.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:26.596Z,1516654166.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:26.851Z,1516654166.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:27.004Z,1516654167.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:27.395Z,1516654167.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:27.647Z,1516654167.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:27.802Z,1516654167.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:28.287Z,1516654168.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:28.443Z,1516654168.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:28.603Z,1516654168.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:28.847Z,1516654168.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:29.003Z,1516654169.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:29.400Z,1516654169.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:29.643Z,1516654169.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:29.804Z,1516654169.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:30.200Z,1516654170.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:30.439Z,1516654170.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:30.604Z,1516654170.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:30.883Z,1516654170.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:31.016Z,1516654171.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:31.408Z,1516654171.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:31.679Z,1516654171.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:31.816Z,1516654171.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:32.196Z,1516654172.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:32.477Z,1516654172.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:32.600Z,1516654172.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:32.891Z,1516654172.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:33.007Z,1516654173.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:33.396Z,1516654173.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:33.687Z,1516654173.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:33.809Z,1516654173.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:34.226Z,1516654174.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:34.483Z,1516654174.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:34.608Z,1516654174.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:34.887Z,1516654174.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:34.995Z,1516654174.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:35.404Z,1516654175.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:35.683Z,1516654175.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:35.796Z,1516654175.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:36.243Z,1516654176.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:36.479Z,1516654176.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:36.604Z,1516654176.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:36.883Z,1516654176.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:36.956Z,1516654176.956 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T20:49:36.956Z,1516654176.956 [NAL9602] Data Fault, FailCount= 5
2018-01-22T20:49:36.957Z,1516654176.957 [NAL9602](ERROR): Data Fault
2018-01-22T20:49:37.012Z,1516654177.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:37.025Z,1516654177.025 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T20:49:37.025Z,1516654177.025 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-22T20:49:37.356Z,1516654177.356 [NAL9602](INFO): Powering down
2018-01-22T20:49:37.402Z,1516654177.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:37.413Z,1516654177.413 [CBIT](INFO): Critical error at 20180122T204937
2018-01-22T20:49:37.681Z,1516654177.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:37.802Z,1516654177.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:38.220Z,1516654178.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:38.475Z,1516654178.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:38.594Z,1516654178.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:38.882Z,1516654178.882 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:39.002Z,1516654179.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:39.395Z,1516654179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:39.675Z,1516654179.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:39.800Z,1516654179.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:40.228Z,1516654180.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:40.471Z,1516654180.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:40.601Z,1516654180.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:40.875Z,1516654180.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:41.001Z,1516654181.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:41.402Z,1516654181.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:41.672Z,1516654181.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:41.800Z,1516654181.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:42.254Z,1516654182.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:42.468Z,1516654182.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:42.590Z,1516654182.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:42.871Z,1516654182.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:42.990Z,1516654182.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:43.390Z,1516654183.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:43.667Z,1516654183.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:43.790Z,1516654183.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:44.190Z,1516654184.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:44.463Z,1516654184.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:44.589Z,1516654184.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:44.915Z,1516654184.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:44.998Z,1516654184.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:45.404Z,1516654185.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:45.712Z,1516654185.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:45.793Z,1516654185.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:46.196Z,1516654186.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:46.509Z,1516654186.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:46.600Z,1516654186.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:46.915Z,1516654186.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:46.995Z,1516654186.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:47.396Z,1516654187.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:47.711Z,1516654187.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:47.795Z,1516654187.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:48.236Z,1516654188.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:48.507Z,1516654188.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:48.608Z,1516654188.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:48.911Z,1516654188.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:49.005Z,1516654189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:49.402Z,1516654189.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:49.707Z,1516654189.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:50.503Z,1516654190.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:50.907Z,1516654190.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:51.703Z,1516654191.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:52.499Z,1516654192.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:52.719Z,1516654192.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:52.845Z,1516654192.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:52.903Z,1516654192.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:53.220Z,1516654193.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:53.617Z,1516654193.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:53.699Z,1516654193.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:54.019Z,1516654194.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:54.426Z,1516654194.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:54.495Z,1516654194.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:54.818Z,1516654194.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:54.899Z,1516654194.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:55.219Z,1516654195.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:55.617Z,1516654195.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:55.695Z,1516654195.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:56.022Z,1516654196.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:56.427Z,1516654196.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:56.491Z,1516654196.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:56.822Z,1516654196.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:56.895Z,1516654196.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:57.218Z,1516654197.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:57.618Z,1516654197.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:57.691Z,1516654197.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:58.024Z,1516654198.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:58.416Z,1516654198.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:58.528Z,1516654198.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:58.827Z,1516654198.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:58.943Z,1516654198.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:49:59.218Z,1516654199.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:59.618Z,1516654199.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:49:59.739Z,1516654199.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:00.024Z,1516654200.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:00.419Z,1516654200.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:00.537Z,1516654200.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:00.824Z,1516654200.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:00.943Z,1516654200.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:01.224Z,1516654201.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:01.619Z,1516654201.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:01.739Z,1516654201.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:02.018Z,1516654202.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:02.427Z,1516654202.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:02.535Z,1516654202.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:02.819Z,1516654202.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:02.939Z,1516654202.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:03.224Z,1516654203.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:03.619Z,1516654203.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:03.735Z,1516654203.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:04.019Z,1516654204.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:04.419Z,1516654204.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:04.533Z,1516654204.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:04.826Z,1516654204.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:04.935Z,1516654204.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:05.218Z,1516654205.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:05.624Z,1516654205.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:05.733Z,1516654205.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:06.016Z,1516654206.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:06.449Z,1516654206.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:06.527Z,1516654206.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:06.824Z,1516654206.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:06.931Z,1516654206.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:07.224Z,1516654207.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:07.624Z,1516654207.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:07.727Z,1516654207.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:08.020Z,1516654208.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:08.449Z,1516654208.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:08.523Z,1516654208.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:08.828Z,1516654208.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:08.927Z,1516654208.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:09.222Z,1516654209.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:09.621Z,1516654209.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:09.723Z,1516654209.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:10.034Z,1516654210.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:10.442Z,1516654210.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:10.521Z,1516654210.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:10.840Z,1516654210.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:10.927Z,1516654210.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:11.217Z,1516654211.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:11.620Z,1516654211.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:11.723Z,1516654211.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:12.020Z,1516654212.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:12.420Z,1516654212.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:12.531Z,1516654212.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:12.846Z,1516654212.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:12.951Z,1516654212.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:13.220Z,1516654213.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:13.644Z,1516654213.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:13.747Z,1516654213.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:14.021Z,1516654214.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:14.414Z,1516654214.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:14.545Z,1516654214.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:14.847Z,1516654214.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:14.955Z,1516654214.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:15.251Z,1516654215.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:15.618Z,1516654215.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:15.751Z,1516654215.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:16.019Z,1516654216.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:16.424Z,1516654216.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:16.547Z,1516654216.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:16.824Z,1516654216.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:16.951Z,1516654216.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:17.218Z,1516654217.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:17.624Z,1516654217.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:17.747Z,1516654217.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:18.016Z,1516654218.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:18.443Z,1516654218.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:18.543Z,1516654218.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:18.846Z,1516654218.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:18.947Z,1516654218.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:19.218Z,1516654219.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:19.624Z,1516654219.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:19.743Z,1516654219.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:20.025Z,1516654220.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:20.422Z,1516654220.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:20.539Z,1516654220.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:20.822Z,1516654220.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:20.943Z,1516654220.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:21.218Z,1516654221.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:21.624Z,1516654221.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:21.739Z,1516654221.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:22.024Z,1516654222.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:22.419Z,1516654222.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:22.535Z,1516654222.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:22.822Z,1516654222.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:22.939Z,1516654222.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:23.236Z,1516654223.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:23.635Z,1516654223.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:23.735Z,1516654223.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:24.022Z,1516654224.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:24.421Z,1516654224.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:24.531Z,1516654224.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:24.834Z,1516654224.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:24.935Z,1516654224.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:25.223Z,1516654225.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:25.632Z,1516654225.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:25.731Z,1516654225.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:26.021Z,1516654226.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:26.428Z,1516654226.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:26.527Z,1516654226.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:26.831Z,1516654226.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:26.979Z,1516654226.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:27.228Z,1516654227.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:27.622Z,1516654227.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:27.775Z,1516654227.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:28.036Z,1516654228.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:28.436Z,1516654228.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:28.573Z,1516654228.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:28.824Z,1516654228.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:28.979Z,1516654228.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:29.226Z,1516654229.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:29.627Z,1516654229.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:29.775Z,1516654229.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:30.022Z,1516654230.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:30.424Z,1516654230.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:30.571Z,1516654230.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:30.829Z,1516654230.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:30.975Z,1516654230.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:31.228Z,1516654231.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:31.628Z,1516654231.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:31.771Z,1516654231.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:32.026Z,1516654232.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:32.426Z,1516654232.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:32.567Z,1516654232.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:32.838Z,1516654232.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:32.971Z,1516654232.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:33.237Z,1516654233.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:33.630Z,1516654233.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:33.767Z,1516654233.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:34.033Z,1516654234.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:34.431Z,1516654234.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:34.565Z,1516654234.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:34.813Z,1516654234.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x31582 got:0x6336
2018-01-22T20:50:34.836Z,1516654234.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:34.971Z,1516654234.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:35.233Z,1516654235.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:35.634Z,1516654235.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:35.767Z,1516654235.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:36.035Z,1516654236.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:36.434Z,1516654236.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:36.565Z,1516654236.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:36.834Z,1516654236.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:36.971Z,1516654236.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:37.235Z,1516654237.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:37.638Z,1516654237.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:37.769Z,1516654237.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:38.038Z,1516654238.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:38.437Z,1516654238.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:38.563Z,1516654238.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:38.840Z,1516654238.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:38.967Z,1516654238.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:39.239Z,1516654239.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:39.617Z,1516654239.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:39.763Z,1516654239.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:40.041Z,1516654240.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:40.420Z,1516654240.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:40.565Z,1516654240.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:40.836Z,1516654240.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:40.991Z,1516654240.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:41.228Z,1516654241.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:41.637Z,1516654241.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:41.787Z,1516654241.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:42.031Z,1516654242.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:42.436Z,1516654242.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:42.585Z,1516654242.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:42.836Z,1516654242.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:42.995Z,1516654242.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:43.226Z,1516654243.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:43.636Z,1516654243.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:43.791Z,1516654243.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:44.057Z,1516654244.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:44.428Z,1516654244.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:44.587Z,1516654244.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:44.837Z,1516654244.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:44.991Z,1516654244.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:45.236Z,1516654245.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:45.638Z,1516654245.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:45.787Z,1516654245.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:46.036Z,1516654246.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:46.430Z,1516654246.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:46.583Z,1516654246.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:46.837Z,1516654246.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:46.987Z,1516654246.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:47.240Z,1516654247.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:47.635Z,1516654247.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:47.783Z,1516654247.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:48.033Z,1516654248.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:48.429Z,1516654248.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:48.579Z,1516654248.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:48.839Z,1516654248.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:48.843Z,1516654248.843 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:45:48.5Z
2018-01-22T20:50:48.843Z,1516654248.843 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T20:50:48.843Z,1516654248.843 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T20:50:48.983Z,1516654248.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:49.236Z,1516654249.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:49.779Z,1516654249.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:50.444Z,1516654250.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:50.575Z,1516654250.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:50.979Z,1516654250.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:51.775Z,1516654251.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:52.571Z,1516654252.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:52.975Z,1516654252.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:53.495Z,1516654253.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:53.623Z,1516654253.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:53.771Z,1516654253.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:53.956Z,1516654253.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:54.354Z,1516654254.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:54.567Z,1516654254.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:54.768Z,1516654254.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:55.029Z,1516654255.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:55.162Z,1516654255.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:55.823Z,1516654255.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:56.621Z,1516654256.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:57.051Z,1516654257.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:57.847Z,1516654257.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:58.505Z,1516654258.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:58.584Z,1516654258.584 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180122T180533/Courier0060.lzma
2018-01-22T20:50:58.640Z,1516654258.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:58.643Z,1516654258.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:58.973Z,1516654258.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:59.047Z,1516654259.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:59.337Z,1516654259.337 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0060.lzma.bak
2018-01-22T20:50:59.337Z,1516654259.337 [DataOverHttps](INFO): SBD MOMSN=7751671
2018-01-22T20:50:59.372Z,1516654259.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:50:59.843Z,1516654259.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:50:59.971Z,1516654259.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:00.174Z,1516654260.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:00.639Z,1516654260.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:01.043Z,1516654261.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:01.840Z,1516654261.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:02.635Z,1516654262.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:03.039Z,1516654263.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:03.500Z,1516654263.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:03.650Z,1516654263.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:03.835Z,1516654263.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:03.968Z,1516654263.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:04.373Z,1516654264.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:04.631Z,1516654264.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:04.769Z,1516654264.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:05.035Z,1516654265.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:05.165Z,1516654265.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:05.831Z,1516654265.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:06.627Z,1516654266.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:07.031Z,1516654267.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:07.827Z,1516654267.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:08.427Z,1516654268.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:08.515Z,1516654268.515 [DataOverHttps](INFO): Sending 129 bytes from file Logs/20180122T180533/Express0061.lzma
2018-01-22T20:51:08.559Z,1516654268.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:08.641Z,1516654268.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:08.923Z,1516654268.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:09.047Z,1516654269.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:09.285Z,1516654269.285 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0061.lzma.bak
2018-01-22T20:51:09.285Z,1516654269.285 [DataOverHttps](INFO): SBD MOMSN=7751674
2018-01-22T20:51:09.340Z,1516654269.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:09.844Z,1516654269.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:09.933Z,1516654269.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:09.936Z,1516654269.936 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T20:51:09.936Z,1516654269.936 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T20:51:09.936Z,1516654269.936 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T20:51:10.134Z,1516654270.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:10.641Z,1516654270.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:11.051Z,1516654271.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:11.847Z,1516654271.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:12.644Z,1516654272.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:13.047Z,1516654273.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:13.473Z,1516654273.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:13.620Z,1516654273.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:13.844Z,1516654273.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:13.945Z,1516654273.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:14.381Z,1516654274.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:14.639Z,1516654274.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:14.744Z,1516654274.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:15.043Z,1516654275.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:15.148Z,1516654275.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:15.538Z,1516654275.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:15.839Z,1516654275.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:15.941Z,1516654275.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:16.383Z,1516654276.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:16.635Z,1516654276.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:16.752Z,1516654276.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:17.039Z,1516654277.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:17.148Z,1516654277.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:17.547Z,1516654277.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:17.835Z,1516654277.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:17.948Z,1516654277.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:18.388Z,1516654278.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:18.631Z,1516654278.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:18.744Z,1516654278.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:19.035Z,1516654279.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:19.152Z,1516654279.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:19.555Z,1516654279.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:19.831Z,1516654279.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:19.952Z,1516654279.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:20.396Z,1516654280.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:20.627Z,1516654280.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:20.740Z,1516654280.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:21.031Z,1516654281.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:21.135Z,1516654281.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:21.539Z,1516654281.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:21.827Z,1516654281.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:21.940Z,1516654281.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:22.340Z,1516654282.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:22.629Z,1516654282.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:22.766Z,1516654282.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:23.071Z,1516654283.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:23.141Z,1516654283.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:23.538Z,1516654283.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:23.867Z,1516654283.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:23.944Z,1516654283.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:24.337Z,1516654284.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:24.665Z,1516654284.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:24.754Z,1516654284.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:25.071Z,1516654285.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:25.138Z,1516654285.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:25.539Z,1516654285.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:25.867Z,1516654285.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:25.973Z,1516654285.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:26.396Z,1516654286.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:26.663Z,1516654286.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:26.748Z,1516654286.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:27.067Z,1516654287.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:27.146Z,1516654287.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:27.548Z,1516654287.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:27.863Z,1516654287.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:27.946Z,1516654287.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:28.373Z,1516654288.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:28.659Z,1516654288.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:28.747Z,1516654288.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:29.063Z,1516654289.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:29.136Z,1516654289.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:29.536Z,1516654289.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:29.861Z,1516654289.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:29.944Z,1516654289.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:30.389Z,1516654290.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:30.656Z,1516654290.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:30.747Z,1516654290.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:31.059Z,1516654291.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:31.144Z,1516654291.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:31.544Z,1516654291.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:31.856Z,1516654291.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:31.948Z,1516654291.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:32.413Z,1516654292.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:32.651Z,1516654292.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:32.751Z,1516654292.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:33.055Z,1516654293.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:33.136Z,1516654293.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:33.536Z,1516654293.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:33.851Z,1516654293.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:33.938Z,1516654293.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:34.335Z,1516654294.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:34.647Z,1516654294.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:34.744Z,1516654294.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:35.051Z,1516654295.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:35.144Z,1516654295.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:35.544Z,1516654295.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:35.847Z,1516654295.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:35.942Z,1516654295.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:36.346Z,1516654296.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:36.666Z,1516654296.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:36.774Z,1516654296.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:37.103Z,1516654297.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:37.157Z,1516654297.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:37.187Z,1516654297.187 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T20:51:37.187Z,1516654297.187 [NAL9602] No Fault, FailCount= 5
2018-01-22T20:51:37.500Z,1516654297.500 [NAL9602](INFO): Powering up NAL9602
2018-01-22T20:51:37.549Z,1516654297.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:37.899Z,1516654297.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:37.952Z,1516654297.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:38.336Z,1516654298.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:38.696Z,1516654298.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:38.767Z,1516654298.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:39.103Z,1516654299.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:39.144Z,1516654299.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:39.540Z,1516654299.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:39.540Z,1516654299.540 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-01-22T20:51:39.540Z,1516654299.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:51:39.542Z,1516654299.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:39.542Z,1516654299.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-01-22T20:51:39.542Z,1516654299.542 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:51:39.544Z,1516654299.544 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:39.544Z,1516654299.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-01-22T20:51:39.544Z,1516654299.544 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:51:39.576Z,1516654299.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:51:39.576Z,1516654299.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:51:39.576Z,1516654299.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:51:39.899Z,1516654299.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:39.979Z,1516654299.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:51:39.979Z,1516654299.979 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-01-22T20:51:39.979Z,1516654299.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:51:39.979Z,1516654299.979 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-01-22T20:51:39.980Z,1516654299.980 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:51:39.980Z,1516654299.980 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-01-22T20:51:40.402Z,1516654300.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:51:40.411Z,1516654300.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:51:40.411Z,1516654300.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:51:40.411Z,1516654300.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:51:40.412Z,1516654300.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:51:40.412Z,1516654300.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:51:40.413Z,1516654300.413 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:51:40.413Z,1516654300.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:51:40.413Z,1516654300.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:51:40.695Z,1516654300.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:40.752Z,1516654300.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:41.099Z,1516654301.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:41.160Z,1516654301.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:41.531Z,1516654301.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:41.895Z,1516654301.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:41.932Z,1516654301.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:42.402Z,1516654302.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:42.699Z,1516654302.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:42.744Z,1516654302.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:43.103Z,1516654303.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:43.148Z,1516654303.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:43.537Z,1516654303.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:43.899Z,1516654303.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:43.951Z,1516654303.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:44.402Z,1516654304.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:44.695Z,1516654304.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:44.748Z,1516654304.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:45.099Z,1516654305.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:45.160Z,1516654305.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:45.550Z,1516654305.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:45.895Z,1516654305.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:45.953Z,1516654305.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:46.439Z,1516654306.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:46.719Z,1516654306.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:46.774Z,1516654306.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:47.123Z,1516654307.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:47.165Z,1516654307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:47.556Z,1516654307.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:47.919Z,1516654307.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:47.956Z,1516654307.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:48.465Z,1516654308.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:48.700Z,1516654308.700 [NAL9602](INFO): NAL9602 initialized
2018-01-22T20:51:48.715Z,1516654308.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:48.776Z,1516654308.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:49.119Z,1516654309.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:49.154Z,1516654309.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:49.583Z,1516654309.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:49.928Z,1516654309.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:49.985Z,1516654309.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:50.380Z,1516654310.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:50.725Z,1516654310.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:50.768Z,1516654310.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:51.160Z,1516654311.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:51.183Z,1516654311.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:51.564Z,1516654311.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:51.951Z,1516654311.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:51.979Z,1516654311.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:52.360Z,1516654312.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:52.775Z,1516654312.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:52.796Z,1516654312.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:53.179Z,1516654313.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:53.188Z,1516654313.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:53.544Z,1516654313.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:53.976Z,1516654313.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:53.978Z,1516654313.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:54.397Z,1516654314.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:54.771Z,1516654314.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:54.785Z,1516654314.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:55.175Z,1516654315.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:55.186Z,1516654315.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:55.568Z,1516654315.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:55.968Z,1516654315.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:55.987Z,1516654315.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:56.433Z,1516654316.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:56.756Z,1516654316.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:56.775Z,1516654316.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:57.152Z,1516654317.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:57.556Z,1516654317.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:57.576Z,1516654317.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:57.946Z,1516654317.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:58.372Z,1516654318.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:58.427Z,1516654318.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:58.754Z,1516654318.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:58.808Z,1516654318.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:59.167Z,1516654319.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:59.544Z,1516654319.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:51:59.603Z,1516654319.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:51:59.952Z,1516654319.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:00.333Z,1516654320.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:00.400Z,1516654320.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:00.748Z,1516654320.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:00.807Z,1516654320.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:01.148Z,1516654321.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:01.554Z,1516654321.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:01.603Z,1516654321.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:01.960Z,1516654321.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:02.348Z,1516654322.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:02.401Z,1516654322.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:02.747Z,1516654322.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:02.843Z,1516654322.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:03.150Z,1516654323.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:03.551Z,1516654323.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:03.639Z,1516654323.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:03.951Z,1516654323.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:04.364Z,1516654324.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:04.435Z,1516654324.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:04.774Z,1516654324.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:05.147Z,1516654325.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:05.231Z,1516654325.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:05.536Z,1516654325.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:05.940Z,1516654325.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:06.027Z,1516654326.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:06.333Z,1516654326.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:06.760Z,1516654326.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:06.823Z,1516654326.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:07.142Z,1516654327.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:07.550Z,1516654327.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:07.619Z,1516654327.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:07.946Z,1516654327.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:08.340Z,1516654328.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:08.417Z,1516654328.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:08.740Z,1516654328.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:09.136Z,1516654329.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:09.211Z,1516654329.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:09.591Z,1516654329.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:09.937Z,1516654329.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:10.007Z,1516654330.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:10.351Z,1516654330.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:10.803Z,1516654330.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:11.207Z,1516654331.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:11.611Z,1516654331.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:12.015Z,1516654332.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:12.420Z,1516654332.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:12.827Z,1516654332.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:13.623Z,1516654333.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:14.348Z,1516654334.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:14.422Z,1516654334.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:14.520Z,1516654334.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:14.827Z,1516654334.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:14.896Z,1516654334.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:15.297Z,1516654335.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:15.623Z,1516654335.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:15.699Z,1516654335.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:16.125Z,1516654336.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:16.432Z,1516654336.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:16.536Z,1516654336.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:16.901Z,1516654336.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:16.911Z,1516654336.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:17.300Z,1516654337.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:17.684Z,1516654337.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:17.707Z,1516654337.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:18.080Z,1516654338.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:18.488Z,1516654338.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:18.503Z,1516654338.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:18.896Z,1516654338.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:19.147Z,1516654339.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:19.294Z,1516654339.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:19.694Z,1516654339.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:19.943Z,1516654339.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:20.120Z,1516654340.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:20.488Z,1516654340.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:20.741Z,1516654340.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:20.886Z,1516654340.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:21.151Z,1516654341.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:21.296Z,1516654341.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:21.687Z,1516654341.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:21.947Z,1516654341.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:22.094Z,1516654342.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:22.523Z,1516654342.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:22.743Z,1516654342.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:22.896Z,1516654342.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:23.147Z,1516654343.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:23.287Z,1516654343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:23.695Z,1516654343.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:23.943Z,1516654343.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:24.091Z,1516654344.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:24.497Z,1516654344.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:24.739Z,1516654344.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:24.900Z,1516654344.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:25.143Z,1516654345.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:25.302Z,1516654345.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:25.711Z,1516654345.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:25.939Z,1516654345.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:26.111Z,1516654346.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:26.502Z,1516654346.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:26.735Z,1516654346.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:26.902Z,1516654346.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:27.139Z,1516654347.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:27.293Z,1516654347.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:27.680Z,1516654347.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:27.937Z,1516654347.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:28.159Z,1516654348.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:28.510Z,1516654348.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:28.731Z,1516654348.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:28.902Z,1516654348.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:29.135Z,1516654349.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:29.280Z,1516654349.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:29.681Z,1516654349.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:29.931Z,1516654349.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:30.080Z,1516654350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:30.543Z,1516654350.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:30.727Z,1516654350.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:30.900Z,1516654350.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:31.131Z,1516654351.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:31.302Z,1516654351.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:31.702Z,1516654351.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:31.927Z,1516654351.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:32.104Z,1516654352.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:32.488Z,1516654352.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:32.727Z,1516654352.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:32.892Z,1516654352.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:33.167Z,1516654353.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:33.300Z,1516654353.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:33.688Z,1516654353.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:33.963Z,1516654353.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:34.102Z,1516654354.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:34.513Z,1516654354.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:34.761Z,1516654354.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:34.916Z,1516654354.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:35.177Z,1516654355.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:35.296Z,1516654355.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:35.696Z,1516654355.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:35.971Z,1516654355.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:36.080Z,1516654356.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:36.509Z,1516654356.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:36.767Z,1516654356.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:36.884Z,1516654356.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:37.171Z,1516654357.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:37.308Z,1516654357.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:37.707Z,1516654357.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:37.967Z,1516654357.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:38.116Z,1516654358.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:38.513Z,1516654358.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:38.763Z,1516654358.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:38.892Z,1516654358.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:39.167Z,1516654359.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:39.284Z,1516654359.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:39.688Z,1516654359.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:39.963Z,1516654359.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:40.094Z,1516654360.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:40.518Z,1516654360.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:40.759Z,1516654360.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:40.908Z,1516654360.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:41.163Z,1516654361.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:41.287Z,1516654361.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:41.688Z,1516654361.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:41.959Z,1516654361.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:42.094Z,1516654362.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:42.506Z,1516654362.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:42.755Z,1516654362.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:42.899Z,1516654362.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:43.161Z,1516654363.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:43.300Z,1516654363.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:43.696Z,1516654363.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:43.955Z,1516654363.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:44.104Z,1516654364.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:44.544Z,1516654364.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:44.751Z,1516654364.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:44.902Z,1516654364.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:45.155Z,1516654365.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:45.292Z,1516654365.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:45.680Z,1516654365.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:45.951Z,1516654365.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:46.110Z,1516654366.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:46.505Z,1516654366.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:46.747Z,1516654366.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:46.906Z,1516654366.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:47.203Z,1516654367.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:47.288Z,1516654367.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:47.684Z,1516654367.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:47.999Z,1516654367.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:48.116Z,1516654368.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:48.515Z,1516654368.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:48.797Z,1516654368.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:48.918Z,1516654368.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:49.203Z,1516654369.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:49.303Z,1516654369.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:49.688Z,1516654369.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:49.999Z,1516654369.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:50.122Z,1516654370.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:50.545Z,1516654370.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:50.795Z,1516654370.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:50.894Z,1516654370.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:51.199Z,1516654371.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:51.301Z,1516654371.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:51.687Z,1516654371.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:51.996Z,1516654371.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:52.095Z,1516654372.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:52.528Z,1516654372.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:52.791Z,1516654372.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:52.905Z,1516654372.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:53.195Z,1516654373.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:53.299Z,1516654373.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:53.709Z,1516654373.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:53.991Z,1516654373.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:54.108Z,1516654374.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:54.550Z,1516654374.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:54.787Z,1516654374.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:54.916Z,1516654374.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:55.191Z,1516654375.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:55.286Z,1516654375.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:55.684Z,1516654375.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:55.987Z,1516654375.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:56.109Z,1516654376.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:56.542Z,1516654376.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:56.783Z,1516654376.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:56.912Z,1516654376.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:57.187Z,1516654377.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:57.288Z,1516654377.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:57.686Z,1516654377.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:57.983Z,1516654377.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:58.107Z,1516654378.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:58.576Z,1516654378.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:58.779Z,1516654378.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:58.905Z,1516654378.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:59.183Z,1516654379.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:52:59.288Z,1516654379.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:59.699Z,1516654379.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:52:59.979Z,1516654379.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:00.101Z,1516654380.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:00.501Z,1516654380.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:00.789Z,1516654380.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:00.908Z,1516654380.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:01.211Z,1516654381.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:01.292Z,1516654381.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:01.687Z,1516654381.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:02.008Z,1516654382.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:02.106Z,1516654382.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:02.500Z,1516654382.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:02.805Z,1516654382.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:02.907Z,1516654382.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:03.219Z,1516654383.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:03.300Z,1516654383.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:03.694Z,1516654383.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:04.015Z,1516654384.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:04.102Z,1516654384.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:04.559Z,1516654384.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:04.811Z,1516654384.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:04.899Z,1516654384.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:05.215Z,1516654385.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:05.302Z,1516654385.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:05.701Z,1516654385.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:06.011Z,1516654386.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:06.102Z,1516654386.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:06.560Z,1516654386.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:06.807Z,1516654386.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:06.908Z,1516654386.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:07.211Z,1516654387.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:07.298Z,1516654387.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:07.695Z,1516654387.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:08.007Z,1516654388.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:08.107Z,1516654388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:08.564Z,1516654388.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:08.803Z,1516654388.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:08.912Z,1516654388.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:09.207Z,1516654389.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:09.281Z,1516654389.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:09.680Z,1516654389.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:10.003Z,1516654390.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:10.094Z,1516654390.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:10.560Z,1516654390.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:10.799Z,1516654390.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:11.203Z,1516654391.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:11.999Z,1516654391.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:12.795Z,1516654392.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:13.199Z,1516654393.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:13.773Z,1516654393.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:13.903Z,1516654393.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:13.996Z,1516654393.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:14.259Z,1516654394.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:14.676Z,1516654394.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:14.791Z,1516654394.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:15.071Z,1516654395.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:15.247Z,1516654395.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:15.474Z,1516654395.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:15.867Z,1516654395.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x7481 got:0x4785
2018-01-22T20:53:15.892Z,1516654395.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:16.043Z,1516654396.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:16.284Z,1516654396.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:16.671Z,1516654396.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:16.841Z,1516654396.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:17.070Z,1516654397.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:17.247Z,1516654397.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:17.453Z,1516654397.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:17.879Z,1516654397.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:18.043Z,1516654398.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:18.283Z,1516654398.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:18.672Z,1516654398.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:18.839Z,1516654398.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:19.077Z,1516654399.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:19.243Z,1516654399.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:19.475Z,1516654399.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:19.863Z,1516654399.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:20.039Z,1516654400.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:20.263Z,1516654400.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:20.668Z,1516654400.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:20.835Z,1516654400.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:21.089Z,1516654401.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:21.239Z,1516654401.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:21.469Z,1516654401.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:21.868Z,1516654401.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:22.035Z,1516654402.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:22.267Z,1516654402.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:22.687Z,1516654402.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:22.831Z,1516654402.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:23.072Z,1516654403.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:23.235Z,1516654403.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:23.462Z,1516654403.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:23.863Z,1516654403.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:24.033Z,1516654404.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:24.293Z,1516654404.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:24.674Z,1516654404.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:24.827Z,1516654404.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:25.197Z,1516654405.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:25.239Z,1516654405.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:25.476Z,1516654405.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:25.893Z,1516654405.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:26.035Z,1516654406.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:26.266Z,1516654406.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:26.670Z,1516654406.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:26.831Z,1516654406.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:27.076Z,1516654407.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:27.237Z,1516654407.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:27.500Z,1516654407.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:27.876Z,1516654407.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:28.032Z,1516654408.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:28.275Z,1516654408.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:28.680Z,1516654408.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:28.842Z,1516654408.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:29.077Z,1516654409.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:29.255Z,1516654409.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:29.456Z,1516654409.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:29.867Z,1516654409.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:30.052Z,1516654410.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:30.283Z,1516654410.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:30.690Z,1516654410.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:30.849Z,1516654410.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:31.064Z,1516654411.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:31.255Z,1516654411.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:31.471Z,1516654411.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:31.863Z,1516654411.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:32.051Z,1516654412.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:32.260Z,1516654412.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:32.659Z,1516654412.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:32.847Z,1516654412.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:33.060Z,1516654413.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:33.251Z,1516654413.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:33.476Z,1516654413.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:33.905Z,1516654413.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:34.047Z,1516654414.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:34.269Z,1516654414.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:34.662Z,1516654414.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:34.843Z,1516654414.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:35.075Z,1516654415.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:35.247Z,1516654415.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:35.465Z,1516654415.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:35.861Z,1516654415.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:36.045Z,1516654416.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:36.276Z,1516654416.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:36.681Z,1516654416.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:36.839Z,1516654416.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:37.080Z,1516654417.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:37.243Z,1516654417.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:37.464Z,1516654417.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:37.861Z,1516654417.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:38.039Z,1516654418.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:38.265Z,1516654418.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:38.667Z,1516654418.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:38.835Z,1516654418.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:39.063Z,1516654419.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:39.239Z,1516654419.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:39.470Z,1516654419.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:39.877Z,1516654419.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:40.035Z,1516654420.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:40.270Z,1516654420.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:40.671Z,1516654420.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:40.831Z,1516654420.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:41.048Z,1516654421.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:41.235Z,1516654421.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:41.449Z,1516654421.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:41.852Z,1516654421.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:42.031Z,1516654422.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:42.274Z,1516654422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:42.683Z,1516654422.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:42.827Z,1516654422.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:43.064Z,1516654423.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:43.267Z,1516654423.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:43.459Z,1516654423.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:43.869Z,1516654423.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:44.063Z,1516654424.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:44.263Z,1516654424.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:44.660Z,1516654424.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:44.861Z,1516654424.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:45.056Z,1516654425.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:45.281Z,1516654425.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:45.473Z,1516654425.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:45.869Z,1516654425.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:46.075Z,1516654426.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:46.270Z,1516654426.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:46.656Z,1516654426.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:46.871Z,1516654426.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:47.064Z,1516654427.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:47.275Z,1516654427.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:47.457Z,1516654427.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:47.864Z,1516654427.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:48.072Z,1516654428.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:48.270Z,1516654428.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:48.680Z,1516654428.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:48.867Z,1516654428.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:49.084Z,1516654429.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:49.271Z,1516654429.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:49.465Z,1516654429.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:49.860Z,1516654429.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:50.067Z,1516654430.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:50.269Z,1516654430.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:50.673Z,1516654430.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:50.863Z,1516654430.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:51.056Z,1516654431.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:51.267Z,1516654431.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:51.462Z,1516654431.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:51.886Z,1516654431.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:52.063Z,1516654432.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:52.266Z,1516654432.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:52.660Z,1516654432.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:52.859Z,1516654432.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:53.060Z,1516654433.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:53.263Z,1516654433.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:53.456Z,1516654433.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:53.862Z,1516654433.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:54.059Z,1516654434.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:54.262Z,1516654434.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:54.691Z,1516654434.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:54.855Z,1516654434.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:55.061Z,1516654435.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:55.259Z,1516654435.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:55.468Z,1516654435.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:55.864Z,1516654435.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:56.055Z,1516654436.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:56.256Z,1516654436.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:56.659Z,1516654436.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:56.851Z,1516654436.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:57.060Z,1516654437.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:57.295Z,1516654437.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:57.470Z,1516654437.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:57.869Z,1516654437.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:58.091Z,1516654438.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:58.269Z,1516654438.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:58.657Z,1516654438.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:58.889Z,1516654438.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:59.059Z,1516654439.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:59.299Z,1516654439.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:53:59.476Z,1516654439.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:53:59.856Z,1516654439.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:00.095Z,1516654440.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:00.270Z,1516654440.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:00.669Z,1516654440.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:00.891Z,1516654440.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:01.076Z,1516654441.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:01.295Z,1516654441.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:01.461Z,1516654441.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:01.866Z,1516654441.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:02.091Z,1516654442.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:02.266Z,1516654442.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:02.671Z,1516654442.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:02.887Z,1516654442.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:03.066Z,1516654443.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:03.291Z,1516654443.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:03.471Z,1516654443.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:03.873Z,1516654443.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:04.087Z,1516654444.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:04.270Z,1516654444.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:04.647Z,1516654444.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:04.883Z,1516654444.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:05.052Z,1516654445.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:05.287Z,1516654445.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:05.456Z,1516654445.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:05.860Z,1516654445.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:06.083Z,1516654446.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:06.262Z,1516654446.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:06.685Z,1516654446.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:06.879Z,1516654446.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:07.085Z,1516654447.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:07.283Z,1516654447.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:07.460Z,1516654447.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:07.859Z,1516654447.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:08.079Z,1516654448.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:08.264Z,1516654448.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:08.690Z,1516654448.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:08.875Z,1516654448.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:09.060Z,1516654449.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:09.279Z,1516654449.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:09.469Z,1516654449.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:09.874Z,1516654449.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:10.075Z,1516654450.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:10.270Z,1516654450.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:10.666Z,1516654450.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:10.872Z,1516654450.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:11.315Z,1516654451.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:12.111Z,1516654452.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:12.909Z,1516654452.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:13.335Z,1516654453.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:13.924Z,1516654453.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:14.056Z,1516654454.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:14.131Z,1516654454.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:14.424Z,1516654454.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:14.826Z,1516654454.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:14.927Z,1516654454.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:15.200Z,1516654455.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:15.331Z,1516654455.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:15.595Z,1516654455.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:15.997Z,1516654455.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:16.127Z,1516654456.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:16.392Z,1516654456.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:16.800Z,1516654456.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:16.923Z,1516654456.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:17.198Z,1516654457.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:17.327Z,1516654457.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:17.609Z,1516654457.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:17.998Z,1516654457.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:18.123Z,1516654458.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:18.389Z,1516654458.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:18.801Z,1516654458.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:18.919Z,1516654458.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:19.206Z,1516654459.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:19.323Z,1516654459.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:19.608Z,1516654459.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:19.993Z,1516654459.993 [BPC1](ERROR): Failed to receive battery data
2018-01-22T20:54:19.993Z,1516654459.993 [BPC1] Communications Fault, FailCount= 10
2018-01-22T20:54:19.993Z,1516654459.993 [BPC1](ERROR): Communications Fault
2018-01-22T20:54:20.001Z,1516654460.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:20.027Z,1516654460.027 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T20:54:20.027Z,1516654460.027 [CBIT](CRITICAL): Communications Fault in component: BPC1
2018-01-22T20:54:20.121Z,1516654460.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:20.403Z,1516654460.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:20.415Z,1516654460.415 [CBIT](INFO): Critical error at 20180122T205420
2018-01-22T20:54:20.799Z,1516654460.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:20.915Z,1516654460.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:21.201Z,1516654461.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:21.319Z,1516654461.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:21.608Z,1516654461.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:22.015Z,1516654462.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:22.115Z,1516654462.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:22.397Z,1516654462.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:22.796Z,1516654462.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:22.911Z,1516654462.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:23.210Z,1516654463.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:23.315Z,1516654463.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:23.616Z,1516654463.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:24.007Z,1516654464.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:24.112Z,1516654464.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:24.428Z,1516654464.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:24.800Z,1516654464.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:24.909Z,1516654464.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:25.212Z,1516654465.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:25.335Z,1516654465.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:25.601Z,1516654465.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:26.009Z,1516654466.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:26.131Z,1516654466.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:26.395Z,1516654466.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:26.789Z,1516654466.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:26.929Z,1516654466.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:27.192Z,1516654467.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:27.343Z,1516654467.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:27.613Z,1516654467.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:28.002Z,1516654468.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:28.139Z,1516654468.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:28.416Z,1516654468.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:28.804Z,1516654468.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:28.935Z,1516654468.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:29.196Z,1516654469.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:29.339Z,1516654469.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:29.592Z,1516654469.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:30.005Z,1516654470.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:30.135Z,1516654470.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:30.407Z,1516654470.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:30.816Z,1516654470.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:30.931Z,1516654470.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:31.208Z,1516654471.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:31.339Z,1516654471.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:31.602Z,1516654471.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:31.996Z,1516654471.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:32.135Z,1516654472.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:32.400Z,1516654472.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:32.808Z,1516654472.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:32.933Z,1516654472.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:33.203Z,1516654473.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:33.339Z,1516654473.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:33.605Z,1516654473.605 [PNI_TCM](ERROR): CRC does not match. Expected:0x32102 got:0x14104
2018-01-22T20:54:33.646Z,1516654473.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:34.010Z,1516654474.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:34.135Z,1516654474.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:34.413Z,1516654474.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:34.805Z,1516654474.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:34.933Z,1516654474.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:35.212Z,1516654475.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:35.339Z,1516654475.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:35.600Z,1516654475.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:36.020Z,1516654476.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:36.137Z,1516654476.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:36.418Z,1516654476.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:36.816Z,1516654476.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:36.931Z,1516654476.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:37.216Z,1516654477.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:37.335Z,1516654477.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:37.590Z,1516654477.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:38.013Z,1516654478.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:38.131Z,1516654478.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:38.394Z,1516654478.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:38.791Z,1516654478.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:38.934Z,1516654478.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:39.216Z,1516654479.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:39.371Z,1516654479.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:39.616Z,1516654479.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:40.020Z,1516654480.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:40.167Z,1516654480.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:40.416Z,1516654480.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:40.416Z,1516654480.416 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-01-22T20:54:40.416Z,1516654480.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:54:40.418Z,1516654480.418 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:40.418Z,1516654480.418 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-01-22T20:54:40.418Z,1516654480.418 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:54:40.420Z,1516654480.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:40.420Z,1516654480.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-01-22T20:54:40.420Z,1516654480.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:54:40.432Z,1516654480.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:54:40.432Z,1516654480.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:54:40.433Z,1516654480.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:54:40.822Z,1516654480.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:54:40.826Z,1516654480.826 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-01-22T20:54:40.827Z,1516654480.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:54:40.827Z,1516654480.827 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-01-22T20:54:40.828Z,1516654480.828 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:54:40.828Z,1516654480.828 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-01-22T20:54:40.965Z,1516654480.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:41.227Z,1516654481.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:54:41.227Z,1516654481.227 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:54:41.228Z,1516654481.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:54:41.228Z,1516654481.228 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:54:41.228Z,1516654481.228 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:54:41.229Z,1516654481.229 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:54:41.229Z,1516654481.229 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:54:41.229Z,1516654481.229 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:54:41.230Z,1516654481.230 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:54:41.371Z,1516654481.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:41.590Z,1516654481.590 [PNI_TCM](ERROR): CRC does not match. Expected:0x31916 got:0x38654
2018-01-22T20:54:41.616Z,1516654481.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:42.003Z,1516654482.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:42.167Z,1516654482.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:42.406Z,1516654482.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:42.811Z,1516654482.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:42.963Z,1516654482.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:43.217Z,1516654483.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:43.367Z,1516654483.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:43.602Z,1516654483.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:44.002Z,1516654484.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:44.163Z,1516654484.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:44.408Z,1516654484.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:44.806Z,1516654484.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:44.959Z,1516654484.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:45.206Z,1516654485.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:45.363Z,1516654485.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:45.608Z,1516654485.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:46.015Z,1516654486.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:46.159Z,1516654486.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:46.411Z,1516654486.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:46.797Z,1516654486.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:46.955Z,1516654486.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:47.204Z,1516654487.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:47.359Z,1516654487.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:47.612Z,1516654487.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:48.001Z,1516654488.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:48.155Z,1516654488.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:48.416Z,1516654488.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:48.851Z,1516654488.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:48.951Z,1516654488.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:49.220Z,1516654489.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:49.355Z,1516654489.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:49.601Z,1516654489.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:49.999Z,1516654489.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:50.151Z,1516654490.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:50.390Z,1516654490.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:50.818Z,1516654490.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:50.947Z,1516654490.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:51.188Z,1516654491.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:51.351Z,1516654491.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:51.615Z,1516654491.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:52.022Z,1516654492.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:52.150Z,1516654492.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:52.420Z,1516654492.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:52.792Z,1516654492.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:52.945Z,1516654492.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:53.202Z,1516654493.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:53.391Z,1516654493.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:53.597Z,1516654493.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:54.024Z,1516654494.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:54.187Z,1516654494.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:54.400Z,1516654494.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:54.804Z,1516654494.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:54.985Z,1516654494.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:55.223Z,1516654495.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:55.623Z,1516654495.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:55.780Z,1516654495.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:56.002Z,1516654496.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:56.283Z,1516654496.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:56.404Z,1516654496.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:56.804Z,1516654496.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:57.047Z,1516654497.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:57.208Z,1516654497.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:57.608Z,1516654497.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:57.843Z,1516654497.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:58.007Z,1516654498.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:58.405Z,1516654498.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:58.641Z,1516654498.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:58.827Z,1516654498.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:59.051Z,1516654499.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:54:59.195Z,1516654499.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:59.592Z,1516654499.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:54:59.847Z,1516654499.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:00.107Z,1516654500.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:00.405Z,1516654500.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:00.645Z,1516654500.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:00.804Z,1516654500.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:01.059Z,1516654501.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:01.211Z,1516654501.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:01.611Z,1516654501.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:01.855Z,1516654501.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:01.991Z,1516654501.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:02.401Z,1516654502.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:02.656Z,1516654502.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:02.806Z,1516654502.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:03.063Z,1516654503.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:03.207Z,1516654503.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:03.606Z,1516654503.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:03.860Z,1516654503.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:04.005Z,1516654504.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:04.415Z,1516654504.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:04.655Z,1516654504.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:04.817Z,1516654504.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:05.115Z,1516654505.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:05.208Z,1516654505.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:05.604Z,1516654505.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:05.911Z,1516654505.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:05.983Z,1516654505.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:06.428Z,1516654506.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:06.707Z,1516654506.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:06.820Z,1516654506.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:07.228Z,1516654507.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:07.399Z,1516654507.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:07.596Z,1516654507.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:07.990Z,1516654507.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:08.195Z,1516654508.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:08.391Z,1516654508.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:08.804Z,1516654508.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:08.994Z,1516654508.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:09.204Z,1516654509.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:09.407Z,1516654509.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:09.600Z,1516654509.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:10.002Z,1516654510.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:10.203Z,1516654510.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:10.404Z,1516654510.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:10.794Z,1516654510.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:10.999Z,1516654510.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:11.403Z,1516654511.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:12.199Z,1516654512.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:12.995Z,1516654512.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:13.399Z,1516654513.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:14.096Z,1516654514.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:14.196Z,1516654514.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:14.232Z,1516654514.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:14.584Z,1516654514.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:14.988Z,1516654514.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:14.991Z,1516654514.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:15.377Z,1516654515.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:15.397Z,1516654515.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:15.755Z,1516654515.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:16.159Z,1516654516.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:16.191Z,1516654516.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:16.560Z,1516654516.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:16.967Z,1516654516.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:16.987Z,1516654516.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:17.373Z,1516654517.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:17.391Z,1516654517.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:17.769Z,1516654517.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:18.169Z,1516654518.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:18.187Z,1516654518.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:18.562Z,1516654518.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:18.968Z,1516654518.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:18.983Z,1516654518.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:19.362Z,1516654519.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:19.387Z,1516654519.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:19.771Z,1516654519.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:20.162Z,1516654520.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:20.191Z,1516654520.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:20.570Z,1516654520.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:20.969Z,1516654520.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:20.989Z,1516654520.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:21.391Z,1516654521.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:21.439Z,1516654521.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:21.768Z,1516654521.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:22.171Z,1516654522.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:22.235Z,1516654522.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:22.568Z,1516654522.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:22.968Z,1516654522.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:23.033Z,1516654523.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:23.390Z,1516654523.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:23.451Z,1516654523.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:23.784Z,1516654523.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:24.186Z,1516654524.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:24.247Z,1516654524.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:24.580Z,1516654524.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:24.988Z,1516654524.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:25.043Z,1516654525.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:25.360Z,1516654525.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:25.447Z,1516654525.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:25.757Z,1516654525.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:26.156Z,1516654526.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:26.243Z,1516654526.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:26.577Z,1516654526.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:26.969Z,1516654526.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:27.039Z,1516654527.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:27.370Z,1516654527.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:27.443Z,1516654527.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:27.763Z,1516654527.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:28.164Z,1516654528.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:28.239Z,1516654528.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:28.564Z,1516654528.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:28.988Z,1516654528.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:29.035Z,1516654529.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:29.394Z,1516654529.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:29.439Z,1516654529.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:29.771Z,1516654529.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:30.176Z,1516654530.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:30.236Z,1516654530.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:30.564Z,1516654530.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:30.962Z,1516654530.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:31.031Z,1516654531.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:31.373Z,1516654531.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:31.435Z,1516654531.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:31.764Z,1516654531.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:32.163Z,1516654532.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:32.232Z,1516654532.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:32.570Z,1516654532.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:32.970Z,1516654532.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:33.027Z,1516654533.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:33.369Z,1516654533.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:33.431Z,1516654533.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:33.769Z,1516654533.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:34.171Z,1516654534.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:34.227Z,1516654534.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:34.563Z,1516654534.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:34.969Z,1516654534.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:35.025Z,1516654535.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:35.384Z,1516654535.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:35.451Z,1516654535.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:35.776Z,1516654535.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:36.176Z,1516654536.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:36.247Z,1516654536.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:36.571Z,1516654536.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:36.963Z,1516654536.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:37.045Z,1516654537.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:37.360Z,1516654537.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:37.459Z,1516654537.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:37.756Z,1516654537.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:38.155Z,1516654538.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:38.255Z,1516654538.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:38.577Z,1516654538.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:38.969Z,1516654538.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:39.051Z,1516654539.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:39.389Z,1516654539.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:39.455Z,1516654539.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:39.763Z,1516654539.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:40.168Z,1516654540.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:40.252Z,1516654540.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:40.563Z,1516654540.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:40.972Z,1516654540.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:41.047Z,1516654541.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:41.370Z,1516654541.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:41.451Z,1516654541.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:41.769Z,1516654541.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:42.169Z,1516654542.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:42.247Z,1516654542.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:42.564Z,1516654542.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:42.961Z,1516654542.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:43.043Z,1516654543.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:43.361Z,1516654543.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:43.447Z,1516654543.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:43.775Z,1516654543.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:44.164Z,1516654544.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:44.243Z,1516654544.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:44.574Z,1516654544.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:44.980Z,1516654544.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:45.041Z,1516654545.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:45.378Z,1516654545.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:45.443Z,1516654545.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:45.772Z,1516654545.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:46.168Z,1516654546.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:46.241Z,1516654546.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:46.567Z,1516654546.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:46.968Z,1516654546.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:47.035Z,1516654547.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:47.378Z,1516654547.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:47.440Z,1516654547.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:47.777Z,1516654547.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:48.181Z,1516654548.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:48.235Z,1516654548.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:48.568Z,1516654548.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:48.594Z,1516654548.594 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T20:55:48.965Z,1516654548.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:49.033Z,1516654549.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:49.384Z,1516654549.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:49.467Z,1516654549.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:49.792Z,1516654549.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:50.189Z,1516654550.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:50.263Z,1516654550.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:50.559Z,1516654550.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:50.968Z,1516654550.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:51.061Z,1516654551.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:51.392Z,1516654551.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:51.475Z,1516654551.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:51.773Z,1516654551.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:52.169Z,1516654552.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:52.271Z,1516654552.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:52.568Z,1516654552.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:52.967Z,1516654552.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:53.067Z,1516654553.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:53.376Z,1516654553.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:53.471Z,1516654553.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:53.776Z,1516654553.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:54.169Z,1516654554.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:54.267Z,1516654554.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:54.569Z,1516654554.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:54.967Z,1516654554.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:55.063Z,1516654555.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:55.376Z,1516654555.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:55.467Z,1516654555.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:55.772Z,1516654555.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:56.176Z,1516654556.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:56.263Z,1516654556.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:56.564Z,1516654556.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:56.962Z,1516654556.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:57.059Z,1516654557.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:57.376Z,1516654557.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:57.463Z,1516654557.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:57.776Z,1516654557.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:58.180Z,1516654558.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:58.259Z,1516654558.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:58.556Z,1516654558.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:58.960Z,1516654558.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:59.055Z,1516654559.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:59.388Z,1516654559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:55:59.459Z,1516654559.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:55:59.780Z,1516654559.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:00.184Z,1516654560.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:00.255Z,1516654560.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:00.584Z,1516654560.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:00.960Z,1516654560.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:01.051Z,1516654561.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:01.382Z,1516654561.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:01.455Z,1516654561.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:01.792Z,1516654561.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:02.182Z,1516654562.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:02.560Z,1516654562.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:02.964Z,1516654562.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:03.392Z,1516654563.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:03.793Z,1516654563.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:04.186Z,1516654564.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:04.569Z,1516654564.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:05.014Z,1516654565.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:05.378Z,1516654565.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:05.777Z,1516654565.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:06.176Z,1516654566.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:06.572Z,1516654566.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:06.965Z,1516654566.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:07.384Z,1516654567.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:07.781Z,1516654567.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:08.181Z,1516654568.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:08.575Z,1516654568.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:08.980Z,1516654568.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:09.388Z,1516654569.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:09.785Z,1516654569.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:10.182Z,1516654570.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:10.185Z,1516654570.185 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T20:56:10.185Z,1516654570.185 [Default:CheckIn:C.Wait] Stopped
2018-01-22T20:56:10.185Z,1516654570.185 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T20:56:10.186Z,1516654570.186 [Default:CheckIn:D] Running Loop=1
2018-01-22T20:56:10.569Z,1516654570.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:10.572Z,1516654570.572 [Default:CheckIn:D] Stopped
2018-01-22T20:56:10.572Z,1516654570.572 [Default:CheckIn:E] Running Loop=1
2018-01-22T20:56:10.978Z,1516654570.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:10.981Z,1516654570.981 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.764730 min 
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn:E] Stopped
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn] Stopped
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn](INFO): Running loop #16
2018-01-22T20:56:10.982Z,1516654570.982 [Default:CheckIn] Running Loop=16
2018-01-22T20:56:10.983Z,1516654570.983 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T20:56:10.983Z,1516654570.983 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T20:56:14.253Z,1516654574.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:14.404Z,1516654574.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:14.726Z,1516654574.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:15.133Z,1516654575.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:15.519Z,1516654575.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:15.917Z,1516654575.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:16.324Z,1516654576.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:16.726Z,1516654576.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:17.191Z,1516654577.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:17.547Z,1516654577.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:17.911Z,1516654577.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:18.317Z,1516654578.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:18.712Z,1516654578.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:19.195Z,1516654579.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:19.526Z,1516654579.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:19.926Z,1516654579.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:20.326Z,1516654580.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:20.727Z,1516654580.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:21.128Z,1516654581.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:21.512Z,1516654581.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:21.913Z,1516654581.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:22.316Z,1516654582.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:22.788Z,1516654582.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:23.128Z,1516654583.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:23.527Z,1516654583.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:23.929Z,1516654583.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:24.322Z,1516654584.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:24.727Z,1516654584.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:25.121Z,1516654585.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:25.528Z,1516654585.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:25.929Z,1516654585.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:26.328Z,1516654586.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:26.716Z,1516654586.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:27.132Z,1516654587.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:27.519Z,1516654587.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:27.929Z,1516654587.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:28.322Z,1516654588.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:28.733Z,1516654588.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:29.136Z,1516654589.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:29.536Z,1516654589.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:29.919Z,1516654589.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:30.319Z,1516654590.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:30.728Z,1516654590.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:31.182Z,1516654591.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:31.535Z,1516654591.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:31.944Z,1516654591.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:32.333Z,1516654592.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:32.711Z,1516654592.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:33.199Z,1516654593.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:33.519Z,1516654593.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:33.917Z,1516654593.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:34.328Z,1516654594.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:34.367Z,1516654594.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:34.726Z,1516654594.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:35.144Z,1516654595.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:35.163Z,1516654595.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:35.540Z,1516654595.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:35.568Z,1516654595.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:35.920Z,1516654595.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:36.320Z,1516654596.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:36.363Z,1516654596.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:36.723Z,1516654596.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:37.128Z,1516654597.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:37.167Z,1516654597.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:37.536Z,1516654597.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:37.571Z,1516654597.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:37.946Z,1516654597.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:38.335Z,1516654598.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:38.367Z,1516654598.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:38.730Z,1516654598.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:39.132Z,1516654599.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:39.171Z,1516654599.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:39.532Z,1516654599.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:39.575Z,1516654599.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:39.916Z,1516654599.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:40.311Z,1516654600.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:40.372Z,1516654600.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:40.739Z,1516654600.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:41.145Z,1516654601.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:41.167Z,1516654601.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:41.544Z,1516654601.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:41.571Z,1516654601.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:41.915Z,1516654601.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:42.324Z,1516654602.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:42.718Z,1516654602.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:43.120Z,1516654603.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:43.526Z,1516654603.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:43.927Z,1516654603.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:44.326Z,1516654604.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:44.726Z,1516654604.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:45.186Z,1516654605.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:45.520Z,1516654605.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:45.929Z,1516654605.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:46.332Z,1516654606.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:46.780Z,1516654606.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:47.248Z,1516654607.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:47.547Z,1516654607.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:47.917Z,1516654607.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:48.321Z,1516654608.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:48.391Z,1516654608.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:48.748Z,1516654608.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:49.145Z,1516654609.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:49.187Z,1516654609.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:49.534Z,1516654609.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:49.591Z,1516654609.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:49.952Z,1516654609.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:50.329Z,1516654610.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:50.387Z,1516654610.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:50.752Z,1516654610.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:51.136Z,1516654611.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:51.183Z,1516654611.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:51.521Z,1516654611.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:51.587Z,1516654611.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:51.928Z,1516654611.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:52.355Z,1516654612.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:52.391Z,1516654612.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:52.752Z,1516654612.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:53.156Z,1516654613.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:53.195Z,1516654613.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:53.540Z,1516654613.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:53.599Z,1516654613.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:53.928Z,1516654613.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:54.333Z,1516654614.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:54.396Z,1516654614.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:54.751Z,1516654614.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:55.156Z,1516654615.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:55.191Z,1516654615.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:55.548Z,1516654615.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:55.595Z,1516654615.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:56:56.034Z,1516654616.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:56.340Z,1516654616.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:56.736Z,1516654616.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:57.142Z,1516654617.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:57.546Z,1516654617.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:57.945Z,1516654617.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:58.346Z,1516654618.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:58.740Z,1516654618.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:59.206Z,1516654619.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:59.582Z,1516654619.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:56:59.911Z,1516654619.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:00.366Z,1516654620.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:00.717Z,1516654620.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:01.120Z,1516654621.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:01.528Z,1516654621.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:01.955Z,1516654621.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:02.331Z,1516654622.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:02.404Z,1516654622.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:02.731Z,1516654622.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:03.130Z,1516654623.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:03.199Z,1516654623.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:03.528Z,1516654623.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:03.603Z,1516654623.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:03.924Z,1516654623.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:04.324Z,1516654624.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:04.399Z,1516654624.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:04.729Z,1516654624.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:05.156Z,1516654625.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:05.195Z,1516654625.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:05.533Z,1516654625.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:05.599Z,1516654625.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:05.920Z,1516654625.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:06.327Z,1516654626.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:06.395Z,1516654626.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:06.732Z,1516654626.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:07.126Z,1516654627.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:07.191Z,1516654627.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:07.542Z,1516654627.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:07.595Z,1516654627.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:07.937Z,1516654627.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:08.335Z,1516654628.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:08.391Z,1516654628.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:08.726Z,1516654628.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:09.131Z,1516654629.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:09.188Z,1516654629.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:09.525Z,1516654629.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:09.591Z,1516654629.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:09.928Z,1516654629.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:10.327Z,1516654630.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:10.735Z,1516654630.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:11.136Z,1516654631.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:14.452Z,1516654634.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:14.580Z,1516654634.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:14.936Z,1516654634.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:15.352Z,1516654635.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:15.740Z,1516654635.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:16.135Z,1516654636.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:16.549Z,1516654636.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:16.956Z,1516654636.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:17.348Z,1516654637.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:17.744Z,1516654637.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:18.141Z,1516654638.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:18.544Z,1516654638.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:18.942Z,1516654638.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:19.345Z,1516654639.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:19.760Z,1516654639.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:20.157Z,1516654640.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:20.551Z,1516654640.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:20.949Z,1516654640.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:21.352Z,1516654641.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:21.736Z,1516654641.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:22.151Z,1516654642.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:22.564Z,1516654642.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:22.958Z,1516654642.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:23.364Z,1516654643.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:23.728Z,1516654643.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:24.137Z,1516654644.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:24.536Z,1516654644.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:25.100Z,1516654645.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:25.334Z,1516654645.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:25.744Z,1516654645.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:26.144Z,1516654646.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:26.546Z,1516654646.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:26.933Z,1516654646.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:27.344Z,1516654647.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:27.740Z,1516654647.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:28.144Z,1516654648.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:28.423Z,1516654648.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:28.548Z,1516654648.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:28.952Z,1516654648.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:29.220Z,1516654649.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:29.356Z,1516654649.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:29.631Z,1516654649.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:29.743Z,1516654649.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:30.136Z,1516654650.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:30.535Z,1516654650.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:30.959Z,1516654650.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:31.340Z,1516654651.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:31.749Z,1516654651.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:32.149Z,1516654652.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:32.549Z,1516654652.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:32.953Z,1516654652.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:33.344Z,1516654653.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:33.741Z,1516654653.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:34.145Z,1516654654.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:34.552Z,1516654654.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:34.968Z,1516654654.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:35.351Z,1516654655.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:35.747Z,1516654655.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:36.148Z,1516654656.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:36.545Z,1516654656.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:36.977Z,1516654656.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:37.327Z,1516654657.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:37.757Z,1516654657.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:38.164Z,1516654658.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:38.560Z,1516654658.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:39.001Z,1516654659.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:39.329Z,1516654659.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:39.728Z,1516654659.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:40.132Z,1516654660.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:40.562Z,1516654660.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:40.955Z,1516654660.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:41.357Z,1516654661.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:41.358Z,1516654661.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-01-22T20:57:41.358Z,1516654661.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T20:57:41.360Z,1516654661.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:41.360Z,1516654661.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-01-22T20:57:41.360Z,1516654661.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T20:57:41.362Z,1516654661.362 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:41.362Z,1516654661.362 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-01-22T20:57:41.362Z,1516654661.362 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T20:57:41.374Z,1516654661.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T20:57:41.374Z,1516654661.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T20:57:41.374Z,1516654661.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T20:57:41.762Z,1516654661.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T20:57:41.762Z,1516654661.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-01-22T20:57:41.767Z,1516654661.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T20:57:41.767Z,1516654661.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-01-22T20:57:41.767Z,1516654661.767 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T20:57:41.767Z,1516654661.767 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-01-22T20:57:42.141Z,1516654662.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T20:57:42.142Z,1516654662.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:57:42.142Z,1516654662.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:57:42.143Z,1516654662.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T20:57:42.143Z,1516654662.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:57:42.143Z,1516654662.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:57:42.144Z,1516654662.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T20:57:42.144Z,1516654662.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T20:57:42.145Z,1516654662.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T20:57:42.439Z,1516654662.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:42.542Z,1516654662.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:42.941Z,1516654662.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:43.237Z,1516654663.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:43.349Z,1516654663.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:43.651Z,1516654663.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:43.735Z,1516654663.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:44.138Z,1516654664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:44.547Z,1516654664.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:44.985Z,1516654664.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:45.350Z,1516654665.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:45.736Z,1516654665.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:46.140Z,1516654666.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:46.548Z,1516654666.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:46.993Z,1516654666.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:47.356Z,1516654667.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:47.748Z,1516654667.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:48.144Z,1516654668.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:48.550Z,1516654668.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:49.007Z,1516654669.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:49.360Z,1516654669.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:49.745Z,1516654669.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:50.148Z,1516654670.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:50.551Z,1516654670.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:50.992Z,1516654670.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:51.350Z,1516654671.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:51.748Z,1516654671.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:52.132Z,1516654672.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:52.557Z,1516654672.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:53.015Z,1516654673.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:53.341Z,1516654673.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:53.732Z,1516654673.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:54.140Z,1516654674.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:54.556Z,1516654674.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:54.961Z,1516654674.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:55.358Z,1516654675.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:55.740Z,1516654675.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:56.139Z,1516654676.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:56.464Z,1516654676.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:56.542Z,1516654676.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:56.941Z,1516654676.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:57.261Z,1516654677.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:57.363Z,1516654677.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:57.667Z,1516654677.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:57:57.736Z,1516654677.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:58.136Z,1516654678.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:58.548Z,1516654678.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:58.990Z,1516654678.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:59.360Z,1516654679.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:57:59.745Z,1516654679.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:00.145Z,1516654680.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:00.548Z,1516654680.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:01.008Z,1516654681.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:01.350Z,1516654681.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:01.746Z,1516654681.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:02.148Z,1516654682.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:02.561Z,1516654682.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:02.997Z,1516654682.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:03.357Z,1516654683.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:03.752Z,1516654683.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:04.152Z,1516654684.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:04.557Z,1516654684.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:05.008Z,1516654685.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:05.347Z,1516654685.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:05.743Z,1516654685.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:06.140Z,1516654686.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:06.548Z,1516654686.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:06.991Z,1516654686.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:07.360Z,1516654687.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:07.744Z,1516654687.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:08.143Z,1516654688.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:08.552Z,1516654688.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:08.952Z,1516654688.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:09.361Z,1516654689.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:09.736Z,1516654689.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:10.140Z,1516654690.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:10.471Z,1516654690.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:10.545Z,1516654690.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:10.941Z,1516654690.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:11.269Z,1516654691.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:11.368Z,1516654691.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:11.683Z,1516654691.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:12.479Z,1516654692.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:13.275Z,1516654693.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:13.679Z,1516654693.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:14.597Z,1516654694.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:14.732Z,1516654694.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:15.125Z,1516654695.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:15.512Z,1516654695.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:15.936Z,1516654695.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:16.302Z,1516654696.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:16.698Z,1516654696.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:17.107Z,1516654697.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:17.501Z,1516654697.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:17.923Z,1516654697.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:18.320Z,1516654698.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:18.713Z,1516654698.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:19.135Z,1516654699.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:19.487Z,1516654699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:19.884Z,1516654699.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:20.298Z,1516654700.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:20.697Z,1516654700.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:21.097Z,1516654701.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:21.498Z,1516654701.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:21.894Z,1516654701.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:22.291Z,1516654702.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:22.702Z,1516654702.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:23.093Z,1516654703.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:23.498Z,1516654703.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:23.905Z,1516654703.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:24.305Z,1516654704.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:24.495Z,1516654704.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:24.708Z,1516654704.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:25.102Z,1516654705.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:25.293Z,1516654705.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:25.491Z,1516654705.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:25.707Z,1516654705.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:25.900Z,1516654705.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:26.295Z,1516654706.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:26.503Z,1516654706.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:26.718Z,1516654706.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:27.108Z,1516654707.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:27.299Z,1516654707.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:27.506Z,1516654707.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:27.703Z,1516654707.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:27.900Z,1516654707.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:28.300Z,1516654708.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:28.694Z,1516654708.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:29.099Z,1516654709.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:29.490Z,1516654709.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:29.926Z,1516654709.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:30.304Z,1516654710.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:30.706Z,1516654710.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:31.102Z,1516654711.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:31.496Z,1516654711.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:31.903Z,1516654711.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:32.300Z,1516654712.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:32.707Z,1516654712.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:33.107Z,1516654713.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:33.516Z,1516654713.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:33.884Z,1516654713.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:34.288Z,1516654714.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:34.694Z,1516654714.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:35.133Z,1516654715.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:35.491Z,1516654715.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:35.906Z,1516654715.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:36.305Z,1516654716.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:36.705Z,1516654716.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:37.108Z,1516654717.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:37.501Z,1516654717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:37.897Z,1516654717.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:38.300Z,1516654718.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:38.519Z,1516654718.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:38.716Z,1516654718.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:39.107Z,1516654719.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:39.317Z,1516654719.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:39.513Z,1516654719.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:39.775Z,1516654719.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:39.891Z,1516654719.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:40.284Z,1516654720.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:40.571Z,1516654720.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:40.683Z,1516654720.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:41.084Z,1516654721.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:41.367Z,1516654721.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:41.492Z,1516654721.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:41.771Z,1516654721.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:41.898Z,1516654721.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:42.297Z,1516654722.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:42.697Z,1516654722.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:43.096Z,1516654723.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:43.495Z,1516654723.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:43.893Z,1516654723.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:44.295Z,1516654724.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:44.704Z,1516654724.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:45.108Z,1516654725.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:45.508Z,1516654725.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:45.892Z,1516654725.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:46.296Z,1516654726.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:46.703Z,1516654726.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:47.096Z,1516654727.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:47.491Z,1516654727.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:47.905Z,1516654727.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:48.308Z,1516654728.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:48.704Z,1516654728.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:49.135Z,1516654729.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:49.500Z,1516654729.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:49.901Z,1516654729.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:50.304Z,1516654730.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:50.706Z,1516654730.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:51.104Z,1516654731.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:51.506Z,1516654731.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:51.902Z,1516654731.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:52.316Z,1516654732.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:52.559Z,1516654732.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:52.696Z,1516654732.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:53.106Z,1516654733.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:53.357Z,1516654733.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:53.488Z,1516654733.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:53.763Z,1516654733.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:53.915Z,1516654733.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:54.298Z,1516654734.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:54.559Z,1516654734.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:54.719Z,1516654734.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:55.089Z,1516654735.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:55.355Z,1516654735.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:55.493Z,1516654735.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:55.759Z,1516654735.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:58:55.892Z,1516654735.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:56.289Z,1516654736.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:56.721Z,1516654736.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:57.120Z,1516654737.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:57.521Z,1516654737.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:57.890Z,1516654737.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:58.291Z,1516654738.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:58.696Z,1516654738.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:59.104Z,1516654739.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:59.491Z,1516654739.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:58:59.904Z,1516654739.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:00.304Z,1516654740.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:00.704Z,1516654740.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:01.102Z,1516654741.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:01.495Z,1516654741.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:01.892Z,1516654741.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:02.303Z,1516654742.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:02.704Z,1516654742.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:03.153Z,1516654743.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:03.516Z,1516654743.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:03.912Z,1516654743.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:04.291Z,1516654744.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:04.699Z,1516654744.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:05.103Z,1516654745.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:05.501Z,1516654745.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:05.917Z,1516654745.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:06.306Z,1516654746.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:06.559Z,1516654746.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:06.705Z,1516654746.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:07.096Z,1516654747.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:07.357Z,1516654747.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:07.501Z,1516654747.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:07.771Z,1516654747.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:07.901Z,1516654747.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:08.292Z,1516654748.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:08.567Z,1516654748.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:08.708Z,1516654748.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:09.115Z,1516654749.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:09.363Z,1516654749.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:09.509Z,1516654749.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:09.767Z,1516654749.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:09.885Z,1516654749.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:10.288Z,1516654750.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:10.683Z,1516654750.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:11.113Z,1516654751.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:11.500Z,1516654751.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:14.777Z,1516654754.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:14.900Z,1516654754.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:15.276Z,1516654755.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:15.655Z,1516654755.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:16.047Z,1516654756.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:16.456Z,1516654756.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:16.877Z,1516654756.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:17.285Z,1516654757.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:17.661Z,1516654757.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:18.056Z,1516654758.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:18.455Z,1516654758.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:18.854Z,1516654758.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:19.259Z,1516654759.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:19.664Z,1516654759.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:20.082Z,1516654760.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:20.113Z,1516654760.113 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T20:59:20.113Z,1516654760.113 [BPC1] No Fault, FailCount= 10
2018-01-22T20:59:20.512Z,1516654760.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:20.579Z,1516654760.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:20.860Z,1516654760.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:21.254Z,1516654761.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:21.377Z,1516654761.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:21.666Z,1516654761.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:21.803Z,1516654761.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:22.067Z,1516654762.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:22.472Z,1516654762.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:22.599Z,1516654762.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:22.854Z,1516654762.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:23.258Z,1516654763.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:23.395Z,1516654763.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:23.672Z,1516654763.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:23.799Z,1516654763.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:24.068Z,1516654764.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:24.465Z,1516654764.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:24.857Z,1516654764.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:25.260Z,1516654765.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:25.667Z,1516654765.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:26.072Z,1516654766.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:26.476Z,1516654766.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:26.854Z,1516654766.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:27.259Z,1516654767.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:27.670Z,1516654767.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:28.072Z,1516654768.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:28.466Z,1516654768.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:28.859Z,1516654768.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:29.256Z,1516654769.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:29.672Z,1516654769.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:30.069Z,1516654770.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:30.467Z,1516654770.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:30.866Z,1516654770.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:31.267Z,1516654771.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:31.680Z,1516654771.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:32.069Z,1516654772.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:32.473Z,1516654772.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:32.863Z,1516654772.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:33.258Z,1516654773.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:33.666Z,1516654773.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:34.072Z,1516654774.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:34.470Z,1516654774.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:34.611Z,1516654774.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:34.879Z,1516654774.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:35.252Z,1516654775.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:35.409Z,1516654775.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:35.679Z,1516654775.679 [BPC1](INFO): Initialized
2018-01-22T20:59:35.688Z,1516654775.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:35.815Z,1516654775.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:36.073Z,1516654776.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:36.453Z,1516654776.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:36.611Z,1516654776.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:36.877Z,1516654776.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:37.275Z,1516654777.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:37.409Z,1516654777.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:37.672Z,1516654777.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:37.811Z,1516654777.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:38.075Z,1516654778.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:38.447Z,1516654778.447 [PNI_TCM](ERROR): CRC does not match. Expected:0x30807 got:0x47111
2018-01-22T20:59:38.481Z,1516654778.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:38.861Z,1516654778.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:39.280Z,1516654779.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:39.651Z,1516654779.651 [PNI_TCM](ERROR): CRC does not match. Expected:0x13465 got:0x37860
2018-01-22T20:59:39.688Z,1516654779.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:40.079Z,1516654780.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:40.481Z,1516654780.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:40.882Z,1516654780.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:41.280Z,1516654781.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:41.650Z,1516654781.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x53826 got:0x16885
2018-01-22T20:59:41.680Z,1516654781.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:42.056Z,1516654782.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:42.476Z,1516654782.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:42.878Z,1516654782.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:43.284Z,1516654783.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:43.658Z,1516654783.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:44.076Z,1516654784.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:44.459Z,1516654784.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:44.865Z,1516654784.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:45.268Z,1516654785.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:45.681Z,1516654785.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:46.067Z,1516654786.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:46.468Z,1516654786.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:46.867Z,1516654786.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:47.281Z,1516654787.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:47.665Z,1516654787.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:48.059Z,1516654788.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:48.458Z,1516654788.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:48.631Z,1516654788.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:48.890Z,1516654788.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:49.269Z,1516654789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:49.433Z,1516654789.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:49.677Z,1516654789.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:49.839Z,1516654789.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:50.060Z,1516654790.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:50.460Z,1516654790.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:50.636Z,1516654790.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:50.848Z,1516654790.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:51.265Z,1516654791.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:51.433Z,1516654791.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:51.672Z,1516654791.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:51.841Z,1516654791.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T20:59:52.082Z,1516654792.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:52.473Z,1516654792.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:52.882Z,1516654792.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:53.268Z,1516654793.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:53.644Z,1516654793.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:54.048Z,1516654794.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:54.444Z,1516654794.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:54.870Z,1516654794.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:55.289Z,1516654795.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:55.658Z,1516654795.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:56.049Z,1516654796.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:56.453Z,1516654796.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:56.856Z,1516654796.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:57.264Z,1516654797.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:57.663Z,1516654797.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:58.068Z,1516654798.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:58.492Z,1516654798.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:58.869Z,1516654798.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:59.256Z,1516654799.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T20:59:59.667Z,1516654799.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:00.055Z,1516654800.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:00.456Z,1516654800.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:00.871Z,1516654800.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:01.272Z,1516654801.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:01.702Z,1516654801.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:02.060Z,1516654802.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:02.469Z,1516654802.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:02.655Z,1516654802.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:02.852Z,1516654802.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:03.252Z,1516654803.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:03.453Z,1516654803.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:03.660Z,1516654803.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:03.863Z,1516654803.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:04.065Z,1516654804.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:04.471Z,1516654804.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:04.659Z,1516654804.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:04.864Z,1516654804.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:05.252Z,1516654805.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:05.455Z,1516654805.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:05.657Z,1516654805.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:05.859Z,1516654805.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:06.071Z,1516654806.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:06.461Z,1516654806.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:06.873Z,1516654806.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:07.266Z,1516654807.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:07.679Z,1516654807.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:08.064Z,1516654808.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:08.464Z,1516654808.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:08.860Z,1516654808.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:09.274Z,1516654809.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:09.664Z,1516654809.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:10.076Z,1516654810.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:10.469Z,1516654810.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:10.879Z,1516654810.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:11.269Z,1516654811.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:11.647Z,1516654811.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:12.643Z,1516654812.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:13.439Z,1516654813.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:13.843Z,1516654813.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:14.639Z,1516654814.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:14.876Z,1516654814.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:14.989Z,1516654814.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:15.354Z,1516654815.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:15.435Z,1516654815.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:15.780Z,1516654815.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:15.883Z,1516654815.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:16.151Z,1516654816.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:16.552Z,1516654816.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:16.679Z,1516654816.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:16.952Z,1516654816.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:17.348Z,1516654817.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:17.477Z,1516654817.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:17.776Z,1516654817.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:17.883Z,1516654817.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:18.170Z,1516654818.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:18.550Z,1516654818.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:18.679Z,1516654818.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:18.943Z,1516654818.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:19.347Z,1516654819.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:19.475Z,1516654819.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:19.750Z,1516654819.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:19.879Z,1516654819.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:20.149Z,1516654820.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:20.556Z,1516654820.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:20.675Z,1516654820.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:20.949Z,1516654820.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:21.352Z,1516654821.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:21.471Z,1516654821.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:21.784Z,1516654821.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:21.875Z,1516654821.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:22.150Z,1516654822.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:22.556Z,1516654822.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:22.671Z,1516654822.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:22.961Z,1516654822.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:23.352Z,1516654823.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:23.467Z,1516654823.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:23.752Z,1516654823.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:23.871Z,1516654823.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:24.160Z,1516654824.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:24.556Z,1516654824.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:24.667Z,1516654824.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:24.948Z,1516654824.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:25.356Z,1516654825.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:25.463Z,1516654825.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:25.771Z,1516654825.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:25.867Z,1516654825.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:26.158Z,1516654826.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:26.561Z,1516654826.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:26.663Z,1516654826.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:26.945Z,1516654826.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:27.360Z,1516654827.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:27.459Z,1516654827.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:27.772Z,1516654827.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:27.863Z,1516654827.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:28.165Z,1516654828.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:28.561Z,1516654828.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:28.659Z,1516654828.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:28.958Z,1516654828.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:29.349Z,1516654829.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:29.455Z,1516654829.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:29.752Z,1516654829.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:29.907Z,1516654829.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:30.167Z,1516654830.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:30.576Z,1516654830.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:30.703Z,1516654830.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:30.964Z,1516654830.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:31.361Z,1516654831.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:31.500Z,1516654831.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:31.749Z,1516654831.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:32.159Z,1516654832.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:32.163Z,1516654832.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:32.567Z,1516654832.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:32.959Z,1516654832.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:32.965Z,1516654832.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:33.368Z,1516654833.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:33.567Z,1516654833.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:33.772Z,1516654833.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:34.165Z,1516654834.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:34.363Z,1516654834.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:34.543Z,1516654834.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:34.969Z,1516654834.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:35.161Z,1516654835.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:35.355Z,1516654835.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:35.575Z,1516654835.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:35.764Z,1516654835.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:36.164Z,1516654836.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:36.371Z,1516654836.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:36.561Z,1516654836.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:36.959Z,1516654836.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:37.169Z,1516654837.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:37.366Z,1516654837.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:37.575Z,1516654837.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:37.743Z,1516654837.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:38.163Z,1516654838.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:38.371Z,1516654838.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:38.569Z,1516654838.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:38.962Z,1516654838.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:39.170Z,1516654839.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:39.365Z,1516654839.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:39.575Z,1516654839.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:39.756Z,1516654839.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:40.160Z,1516654840.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:40.371Z,1516654840.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:40.551Z,1516654840.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:40.953Z,1516654840.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:41.167Z,1516654841.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:41.352Z,1516654841.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:41.647Z,1516654841.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:41.773Z,1516654841.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:42.149Z,1516654842.149 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:42.149Z,1516654842.149 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-01-22T21:00:42.149Z,1516654842.149 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:00:42.151Z,1516654842.151 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:42.151Z,1516654842.151 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-01-22T21:00:42.151Z,1516654842.151 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:00:42.153Z,1516654842.153 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:42.153Z,1516654842.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-01-22T21:00:42.153Z,1516654842.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:00:42.189Z,1516654842.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:00:42.190Z,1516654842.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:00:42.190Z,1516654842.190 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:00:42.443Z,1516654842.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:42.560Z,1516654842.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:00:42.560Z,1516654842.560 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-01-22T21:00:42.561Z,1516654842.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:00:42.561Z,1516654842.561 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-01-22T21:00:42.561Z,1516654842.561 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:00:42.562Z,1516654842.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-01-22T21:00:42.955Z,1516654842.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:00:42.955Z,1516654842.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:00:42.956Z,1516654842.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:00:42.956Z,1516654842.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:00:42.957Z,1516654842.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:00:42.957Z,1516654842.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:00:42.957Z,1516654842.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:00:42.958Z,1516654842.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:00:42.958Z,1516654842.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:00:43.239Z,1516654843.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:43.368Z,1516654843.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:43.750Z,1516654843.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:43.919Z,1516654843.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:44.161Z,1516654844.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:44.554Z,1516654844.554 [PNI_TCM](ERROR): CRC does not match. Expected:0x9511 got:0x4767
2018-01-22T21:00:44.572Z,1516654844.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:44.715Z,1516654844.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:44.972Z,1516654844.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:45.354Z,1516654845.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:45.513Z,1516654845.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:45.761Z,1516654845.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:45.923Z,1516654845.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:46.151Z,1516654846.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:46.564Z,1516654846.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:46.719Z,1516654846.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:46.964Z,1516654846.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:47.361Z,1516654847.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:47.515Z,1516654847.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:47.765Z,1516654847.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:47.919Z,1516654847.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:48.166Z,1516654848.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:48.544Z,1516654848.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:48.715Z,1516654848.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:48.950Z,1516654848.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:49.364Z,1516654849.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:49.511Z,1516654849.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:49.767Z,1516654849.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:49.915Z,1516654849.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:50.163Z,1516654850.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:50.569Z,1516654850.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:50.711Z,1516654850.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:50.969Z,1516654850.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:51.352Z,1516654851.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:51.507Z,1516654851.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:51.759Z,1516654851.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:51.911Z,1516654851.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:52.158Z,1516654852.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:52.552Z,1516654852.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:52.707Z,1516654852.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:52.958Z,1516654852.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:53.365Z,1516654853.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:53.503Z,1516654853.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:53.773Z,1516654853.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:53.907Z,1516654853.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:54.162Z,1516654854.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:54.544Z,1516654854.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:54.703Z,1516654854.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:54.941Z,1516654854.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:55.339Z,1516654855.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:55.499Z,1516654855.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:55.767Z,1516654855.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:55.905Z,1516654855.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:56.150Z,1516654856.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:56.556Z,1516654856.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:56.699Z,1516654856.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:56.956Z,1516654856.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:57.348Z,1516654857.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:57.495Z,1516654857.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:57.743Z,1516654857.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:57.947Z,1516654857.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:58.143Z,1516654858.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:58.551Z,1516654858.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:58.743Z,1516654858.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:58.956Z,1516654858.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:59.349Z,1516654859.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:59.541Z,1516654859.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:00:59.755Z,1516654859.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:00:59.955Z,1516654859.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:00.146Z,1516654860.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:00.555Z,1516654860.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:00.751Z,1516654860.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:00.947Z,1516654860.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:01.384Z,1516654861.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:01.547Z,1516654861.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:01.745Z,1516654861.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:01.951Z,1516654861.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:02.172Z,1516654862.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:02.564Z,1516654862.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:02.747Z,1516654862.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:02.960Z,1516654862.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:03.343Z,1516654863.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:03.543Z,1516654863.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:03.759Z,1516654863.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:03.947Z,1516654863.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:04.145Z,1516654864.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:04.548Z,1516654864.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:04.743Z,1516654864.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:04.957Z,1516654864.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:05.363Z,1516654865.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:05.539Z,1516654865.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:05.754Z,1516654865.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:05.943Z,1516654865.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:06.156Z,1516654866.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:06.547Z,1516654866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:06.739Z,1516654866.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:06.951Z,1516654866.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:07.360Z,1516654867.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:07.535Z,1516654867.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:07.755Z,1516654867.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:07.939Z,1516654867.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:08.157Z,1516654868.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:08.569Z,1516654868.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:08.735Z,1516654868.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:08.964Z,1516654868.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:09.353Z,1516654869.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:09.531Z,1516654869.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:09.756Z,1516654869.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:09.935Z,1516654869.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:10.149Z,1516654870.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:10.550Z,1516654870.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:10.731Z,1516654870.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:10.964Z,1516654870.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:11.362Z,1516654871.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:11.380Z,1516654871.380 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T20:56:10.0Z
2018-01-22T21:01:11.380Z,1516654871.380 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:01:11.380Z,1516654871.380 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T21:01:11.556Z,1516654871.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:11.758Z,1516654871.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:11.975Z,1516654871.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:12.771Z,1516654872.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:13.569Z,1516654873.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:13.984Z,1516654873.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:14.779Z,1516654874.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:15.108Z,1516654875.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:15.186Z,1516654875.186 [DataOverHttps](INFO): Sending 75 bytes from file Logs/20180122T180533/Courier0064.lzma
2018-01-22T21:01:15.296Z,1516654875.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:15.575Z,1516654875.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:15.599Z,1516654875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:15.941Z,1516654875.941 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0064.lzma.bak
2018-01-22T21:01:15.944Z,1516654875.944 [DataOverHttps](INFO): SBD MOMSN=7751736
2018-01-22T21:01:15.979Z,1516654875.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:16.057Z,1516654876.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:16.775Z,1516654876.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:17.342Z,1516654877.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:17.470Z,1516654877.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:17.571Z,1516654877.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:17.975Z,1516654877.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:18.771Z,1516654878.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:19.567Z,1516654879.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:19.971Z,1516654879.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:20.700Z,1516654880.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:20.767Z,1516654880.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:20.840Z,1516654880.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:21.224Z,1516654881.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:21.563Z,1516654881.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:21.617Z,1516654881.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:21.967Z,1516654881.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:22.014Z,1516654882.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:22.399Z,1516654882.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:22.763Z,1516654882.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:23.559Z,1516654883.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:23.963Z,1516654883.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:24.759Z,1516654884.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:25.557Z,1516654885.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:25.815Z,1516654885.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:25.903Z,1516654885.903 [DataOverHttps](INFO): Sending 86 bytes from file Logs/20180122T180533/Express0065.lzma
2018-01-22T21:01:25.968Z,1516654885.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:25.999Z,1516654885.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:26.318Z,1516654886.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:26.673Z,1516654886.673 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0065.lzma.bak
2018-01-22T21:01:26.674Z,1516654886.674 [DataOverHttps](INFO): SBD MOMSN=7751738
2018-01-22T21:01:26.748Z,1516654886.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:26.795Z,1516654886.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:27.335Z,1516654887.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:27.338Z,1516654887.338 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T21:01:27.339Z,1516654887.339 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T21:01:27.339Z,1516654887.339 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T21:01:27.510Z,1516654887.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:27.593Z,1516654887.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:28.019Z,1516654888.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:28.815Z,1516654888.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:29.611Z,1516654889.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:30.015Z,1516654890.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:30.783Z,1516654890.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:30.811Z,1516654890.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:30.918Z,1516654890.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:31.327Z,1516654891.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:31.607Z,1516654891.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:31.672Z,1516654891.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:32.011Z,1516654892.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:32.070Z,1516654892.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:32.446Z,1516654892.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:32.807Z,1516654892.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:32.852Z,1516654892.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:33.309Z,1516654893.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:33.603Z,1516654893.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:33.660Z,1516654893.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:34.007Z,1516654894.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:34.067Z,1516654894.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:34.476Z,1516654894.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:34.803Z,1516654894.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:34.864Z,1516654894.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:35.328Z,1516654895.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:35.607Z,1516654895.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:35.661Z,1516654895.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:36.011Z,1516654896.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:36.046Z,1516654896.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:36.449Z,1516654896.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:36.807Z,1516654896.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:36.867Z,1516654896.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:37.254Z,1516654897.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:37.603Z,1516654897.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:37.664Z,1516654897.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:38.007Z,1516654898.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:38.056Z,1516654898.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:38.454Z,1516654898.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:38.803Z,1516654898.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:38.876Z,1516654898.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:39.264Z,1516654899.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:39.612Z,1516654899.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:39.697Z,1516654899.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:40.027Z,1516654900.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:40.054Z,1516654900.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:40.441Z,1516654900.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:40.824Z,1516654900.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:40.841Z,1516654900.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:41.269Z,1516654901.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:41.620Z,1516654901.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:41.700Z,1516654901.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:42.043Z,1516654902.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:42.060Z,1516654902.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:42.456Z,1516654902.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:42.840Z,1516654902.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:42.860Z,1516654902.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:43.305Z,1516654903.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:43.635Z,1516654903.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:43.664Z,1516654903.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:44.039Z,1516654904.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:44.067Z,1516654904.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:44.482Z,1516654904.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:44.837Z,1516654904.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:44.868Z,1516654904.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:45.311Z,1516654905.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:45.631Z,1516654905.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:45.648Z,1516654905.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:46.035Z,1516654906.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:46.056Z,1516654906.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:46.446Z,1516654906.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:46.831Z,1516654906.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:46.847Z,1516654906.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:47.320Z,1516654907.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:47.627Z,1516654907.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:47.682Z,1516654907.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:48.092Z,1516654908.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:48.423Z,1516654908.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:48.584Z,1516654908.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:48.876Z,1516654908.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:48.899Z,1516654908.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:49.327Z,1516654909.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:49.669Z,1516654909.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:49.695Z,1516654909.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:50.008Z,1516654910.008 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T21:01:50.008Z,1516654910.008 [NAL9602] Data Fault, FailCount= 1
2018-01-22T21:01:50.008Z,1516654910.008 [NAL9602](ERROR): Data Fault
2018-01-22T21:01:50.053Z,1516654910.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:50.083Z,1516654910.083 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T21:01:50.099Z,1516654910.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:50.408Z,1516654910.408 [NAL9602](INFO): Powering down
2018-01-22T21:01:50.477Z,1516654910.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:50.856Z,1516654910.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:50.895Z,1516654910.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:51.246Z,1516654911.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:51.259Z,1516654911.259 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T21:01:51.259Z,1516654911.259 [NAL9602] No Fault, FailCount= 1
2018-01-22T21:01:51.650Z,1516654911.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:51.691Z,1516654911.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:52.047Z,1516654912.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:52.095Z,1516654912.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:52.444Z,1516654912.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:52.879Z,1516654912.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:52.891Z,1516654912.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:53.257Z,1516654913.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:53.687Z,1516654913.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:53.736Z,1516654913.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:54.060Z,1516654914.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:54.099Z,1516654914.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:54.455Z,1516654914.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:54.860Z,1516654914.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:54.895Z,1516654914.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:55.261Z,1516654915.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:55.691Z,1516654915.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:55.750Z,1516654915.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:56.045Z,1516654916.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:56.107Z,1516654916.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:56.453Z,1516654916.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:56.880Z,1516654916.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:56.903Z,1516654916.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:57.256Z,1516654917.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:57.668Z,1516654917.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:57.699Z,1516654917.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:58.065Z,1516654918.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:58.108Z,1516654918.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:58.484Z,1516654918.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:58.861Z,1516654918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:58.903Z,1516654918.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:01:59.328Z,1516654919.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:59.665Z,1516654919.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:01:59.699Z,1516654919.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:00.064Z,1516654920.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:00.103Z,1516654920.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:00.460Z,1516654920.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:00.845Z,1516654920.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:00.899Z,1516654920.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:01.343Z,1516654921.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:01.656Z,1516654921.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:01.695Z,1516654921.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:02.056Z,1516654922.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:02.099Z,1516654922.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:02.449Z,1516654922.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:02.856Z,1516654922.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:02.895Z,1516654922.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:03.253Z,1516654923.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:03.657Z,1516654923.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:03.691Z,1516654923.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:04.047Z,1516654924.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:04.095Z,1516654924.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:04.460Z,1516654924.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:04.839Z,1516654924.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:04.891Z,1516654924.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:05.263Z,1516654925.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:05.650Z,1516654925.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:05.687Z,1516654925.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:06.044Z,1516654926.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:06.091Z,1516654926.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:06.443Z,1516654926.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:06.844Z,1516654926.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:06.888Z,1516654926.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:07.241Z,1516654927.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:07.683Z,1516654927.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:07.708Z,1516654927.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:08.048Z,1516654928.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:08.103Z,1516654928.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:08.453Z,1516654928.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:08.846Z,1516654928.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:08.899Z,1516654928.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:09.245Z,1516654929.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:09.695Z,1516654929.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:09.707Z,1516654929.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:10.055Z,1516654930.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:10.099Z,1516654930.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:10.452Z,1516654930.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:10.852Z,1516654930.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:10.895Z,1516654930.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:11.256Z,1516654931.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:11.660Z,1516654931.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:11.691Z,1516654931.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:12.060Z,1516654932.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:12.095Z,1516654932.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:12.460Z,1516654932.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:12.864Z,1516654932.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:12.891Z,1516654932.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:13.239Z,1516654933.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:13.656Z,1516654933.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:13.687Z,1516654933.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:14.051Z,1516654934.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:14.091Z,1516654934.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:14.448Z,1516654934.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:14.855Z,1516654934.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:14.887Z,1516654934.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:15.248Z,1516654935.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:15.654Z,1516654935.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:15.687Z,1516654935.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:16.056Z,1516654936.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:16.091Z,1516654936.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:16.454Z,1516654936.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:16.856Z,1516654936.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:16.887Z,1516654936.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:17.256Z,1516654937.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:17.661Z,1516654937.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:17.683Z,1516654937.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:18.059Z,1516654938.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:18.087Z,1516654938.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:18.452Z,1516654938.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:18.839Z,1516654938.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:18.883Z,1516654938.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:19.248Z,1516654939.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:19.651Z,1516654939.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:19.679Z,1516654939.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:20.055Z,1516654940.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:20.083Z,1516654940.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:20.449Z,1516654940.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:20.808Z,1516654940.808 [NAL9602](INFO): Powering up NAL9602
2018-01-22T21:02:20.856Z,1516654940.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:20.879Z,1516654940.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:21.249Z,1516654941.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:21.677Z,1516654941.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:21.716Z,1516654941.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:22.055Z,1516654942.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:22.087Z,1516654942.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:22.455Z,1516654942.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:22.857Z,1516654942.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:22.883Z,1516654942.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:23.259Z,1516654943.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:23.680Z,1516654943.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:23.723Z,1516654943.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:24.081Z,1516654944.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:24.095Z,1516654944.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:24.447Z,1516654944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:24.847Z,1516654944.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:24.891Z,1516654944.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:25.253Z,1516654945.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:25.652Z,1516654945.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:25.687Z,1516654945.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:26.045Z,1516654946.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:26.091Z,1516654946.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:26.448Z,1516654946.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:26.845Z,1516654946.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:26.887Z,1516654946.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:27.248Z,1516654947.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:27.683Z,1516654947.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:27.691Z,1516654947.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:28.049Z,1516654948.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:28.087Z,1516654948.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:28.883Z,1516654948.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:29.679Z,1516654949.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:30.083Z,1516654950.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:30.879Z,1516654950.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:31.496Z,1516654951.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:31.626Z,1516654951.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:31.675Z,1516654951.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:31.950Z,1516654951.950 [NAL9602](INFO): NAL9602 initialized
2018-01-22T21:02:32.004Z,1516654952.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:32.079Z,1516654952.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:32.397Z,1516654952.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:32.808Z,1516654952.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:32.875Z,1516654952.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:33.194Z,1516654953.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:33.593Z,1516654953.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:33.672Z,1516654953.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:33.991Z,1516654953.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:34.075Z,1516654954.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:34.391Z,1516654954.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:34.792Z,1516654954.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:34.872Z,1516654954.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:35.192Z,1516654955.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:35.604Z,1516654955.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:35.680Z,1516654955.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:36.006Z,1516654956.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:36.099Z,1516654956.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:36.401Z,1516654956.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:36.794Z,1516654956.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:36.895Z,1516654956.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:37.195Z,1516654957.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:37.589Z,1516654957.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:37.693Z,1516654957.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:37.998Z,1516654957.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:38.099Z,1516654958.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:38.402Z,1516654958.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:38.803Z,1516654958.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:38.895Z,1516654958.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:39.203Z,1516654959.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:39.596Z,1516654959.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:39.691Z,1516654959.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:39.983Z,1516654959.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:40.095Z,1516654960.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:40.388Z,1516654960.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:40.780Z,1516654960.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:40.891Z,1516654960.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:41.188Z,1516654961.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:41.608Z,1516654961.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:41.687Z,1516654961.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:42.016Z,1516654962.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:42.091Z,1516654962.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:42.414Z,1516654962.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:42.784Z,1516654962.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:42.887Z,1516654962.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:43.187Z,1516654963.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:43.593Z,1516654963.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:43.683Z,1516654963.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:43.991Z,1516654963.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:44.087Z,1516654964.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:44.390Z,1516654964.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:44.790Z,1516654964.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:44.883Z,1516654964.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:45.202Z,1516654965.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:45.588Z,1516654965.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:45.679Z,1516654965.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:45.996Z,1516654965.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:46.083Z,1516654966.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:46.388Z,1516654966.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:46.792Z,1516654966.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:46.879Z,1516654966.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:47.196Z,1516654967.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:47.605Z,1516654967.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:47.675Z,1516654967.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:48.049Z,1516654968.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:48.079Z,1516654968.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:48.404Z,1516654968.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:48.793Z,1516654968.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:48.875Z,1516654968.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:49.177Z,1516654969.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:49.577Z,1516654969.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:49.671Z,1516654969.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:49.981Z,1516654969.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:50.115Z,1516654970.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:50.416Z,1516654970.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:50.803Z,1516654970.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:50.911Z,1516654970.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:51.206Z,1516654971.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:51.587Z,1516654971.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:51.709Z,1516654971.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:51.997Z,1516654971.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:52.119Z,1516654972.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:52.382Z,1516654972.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:52.782Z,1516654972.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:52.915Z,1516654972.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:53.196Z,1516654973.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:53.599Z,1516654973.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:53.711Z,1516654973.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:53.999Z,1516654973.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:54.115Z,1516654974.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:54.392Z,1516654974.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:54.796Z,1516654974.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:54.911Z,1516654974.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:55.197Z,1516654975.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:55.585Z,1516654975.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:55.707Z,1516654975.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:55.984Z,1516654975.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:56.111Z,1516654976.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:56.394Z,1516654976.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:56.798Z,1516654976.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:56.907Z,1516654976.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:57.198Z,1516654977.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:57.588Z,1516654977.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:57.705Z,1516654977.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:57.998Z,1516654977.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:58.111Z,1516654978.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:58.393Z,1516654978.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:58.787Z,1516654978.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:58.909Z,1516654978.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:02:59.188Z,1516654979.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:59.604Z,1516654979.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:02:59.703Z,1516654979.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:00.003Z,1516654980.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:00.107Z,1516654980.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:00.401Z,1516654980.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:00.790Z,1516654980.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:00.903Z,1516654980.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:01.199Z,1516654981.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:01.598Z,1516654981.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:01.699Z,1516654981.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:02.029Z,1516654982.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:02.103Z,1516654982.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:02.401Z,1516654982.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:02.800Z,1516654982.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:02.899Z,1516654982.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:03.208Z,1516654983.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:03.597Z,1516654983.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:03.721Z,1516654983.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:03.994Z,1516654983.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:04.147Z,1516654984.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:04.393Z,1516654984.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:04.773Z,1516654984.773 [PNI_TCM](ERROR): CRC does not match. Expected:0x9479 got:0x1857
2018-01-22T21:03:04.799Z,1516654984.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:04.943Z,1516654984.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:05.194Z,1516654985.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:05.601Z,1516654985.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:05.741Z,1516654985.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:06.000Z,1516654986.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:06.147Z,1516654986.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:06.411Z,1516654986.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:06.795Z,1516654986.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:06.943Z,1516654986.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:07.192Z,1516654987.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:07.598Z,1516654987.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:07.739Z,1516654987.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:07.982Z,1516654987.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:08.143Z,1516654988.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:08.407Z,1516654988.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:08.815Z,1516654988.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:08.939Z,1516654988.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:09.214Z,1516654989.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:09.604Z,1516654989.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:09.737Z,1516654989.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:09.980Z,1516654989.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:10.143Z,1516654990.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:10.386Z,1516654990.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:10.805Z,1516654990.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:10.941Z,1516654990.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:11.199Z,1516654991.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:11.608Z,1516654991.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:11.735Z,1516654991.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:12.022Z,1516654992.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:12.139Z,1516654992.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:12.412Z,1516654992.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:12.795Z,1516654992.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:12.935Z,1516654992.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:13.216Z,1516654993.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:13.593Z,1516654993.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:13.731Z,1516654993.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:13.996Z,1516654993.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:14.135Z,1516654994.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:14.395Z,1516654994.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:14.786Z,1516654994.786 [PNI_TCM](ERROR): CRC does not match. Expected:0x7085 got:0x4729
2018-01-22T21:03:14.822Z,1516654994.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:14.931Z,1516654994.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:15.207Z,1516654995.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:15.600Z,1516654995.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:15.727Z,1516654995.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:15.992Z,1516654995.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:16.131Z,1516654996.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:16.390Z,1516654996.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:16.800Z,1516654996.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:16.927Z,1516654996.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:17.204Z,1516654997.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:17.601Z,1516654997.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:17.730Z,1516654997.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:18.020Z,1516654998.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:18.167Z,1516654998.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:18.400Z,1516654998.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:18.786Z,1516654998.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:18.963Z,1516654998.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:19.197Z,1516654999.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:19.600Z,1516654999.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:19.761Z,1516654999.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:19.996Z,1516654999.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:20.167Z,1516655000.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:20.416Z,1516655000.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:20.799Z,1516655000.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x65280 got:0x64540
2018-01-22T21:03:20.837Z,1516655000.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:20.963Z,1516655000.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:21.203Z,1516655001.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:21.597Z,1516655001.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:21.759Z,1516655001.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:22.008Z,1516655002.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:22.163Z,1516655002.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:22.404Z,1516655002.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:22.813Z,1516655002.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:22.959Z,1516655002.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:23.205Z,1516655003.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:23.606Z,1516655003.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:23.755Z,1516655003.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:23.997Z,1516655003.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:24.159Z,1516655004.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:24.406Z,1516655004.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:24.816Z,1516655004.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:24.955Z,1516655004.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:25.213Z,1516655005.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:25.608Z,1516655005.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:25.751Z,1516655005.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:26.007Z,1516655006.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:26.155Z,1516655006.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:26.393Z,1516655006.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:26.816Z,1516655006.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:26.951Z,1516655006.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:27.218Z,1516655007.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:27.596Z,1516655007.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:27.747Z,1516655007.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:28.012Z,1516655008.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:28.153Z,1516655008.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:28.420Z,1516655008.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:28.948Z,1516655008.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:29.743Z,1516655009.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:30.147Z,1516655010.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:30.943Z,1516655010.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:31.684Z,1516655011.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:31.760Z,1516655011.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:31.872Z,1516655011.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:32.157Z,1516655012.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:32.195Z,1516655012.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:32.567Z,1516655012.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:32.952Z,1516655012.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:32.991Z,1516655012.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:33.365Z,1516655013.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:33.789Z,1516655013.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:33.821Z,1516655013.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:34.170Z,1516655014.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:34.211Z,1516655014.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:34.548Z,1516655014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:34.944Z,1516655014.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:35.007Z,1516655015.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:35.370Z,1516655015.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:35.780Z,1516655015.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:35.803Z,1516655015.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:36.178Z,1516655016.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:36.207Z,1516655016.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:36.552Z,1516655016.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:36.952Z,1516655016.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:37.003Z,1516655017.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:37.358Z,1516655017.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:37.764Z,1516655017.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:37.799Z,1516655017.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:38.166Z,1516655018.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:38.203Z,1516655018.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:38.560Z,1516655018.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:38.957Z,1516655018.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:38.999Z,1516655018.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:39.364Z,1516655019.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:39.769Z,1516655019.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:39.803Z,1516655019.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:40.172Z,1516655020.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:40.207Z,1516655020.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:40.576Z,1516655020.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:40.944Z,1516655020.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:41.003Z,1516655021.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:41.344Z,1516655021.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:41.768Z,1516655021.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:41.799Z,1516655021.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:42.152Z,1516655022.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:42.203Z,1516655022.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:42.579Z,1516655022.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:42.961Z,1516655022.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:42.962Z,1516655022.962 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-01-22T21:03:42.962Z,1516655022.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:03:42.980Z,1516655022.980 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:42.980Z,1516655022.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-01-22T21:03:42.980Z,1516655022.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:03:42.982Z,1516655022.982 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:42.982Z,1516655022.982 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-01-22T21:03:42.982Z,1516655022.982 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:03:42.999Z,1516655022.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:43.007Z,1516655023.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:03:43.007Z,1516655023.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:03:43.008Z,1516655023.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:03:43.369Z,1516655023.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:03:43.369Z,1516655023.369 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-01-22T21:03:43.370Z,1516655023.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:03:43.370Z,1516655023.370 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-01-22T21:03:43.370Z,1516655023.370 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:03:43.370Z,1516655023.370 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-01-22T21:03:43.751Z,1516655023.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:03:43.751Z,1516655023.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:03:43.752Z,1516655023.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:03:43.752Z,1516655023.752 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:03:43.753Z,1516655023.753 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:03:43.753Z,1516655023.753 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:03:43.753Z,1516655023.753 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:03:43.754Z,1516655023.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:03:43.754Z,1516655023.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:03:43.795Z,1516655023.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:44.171Z,1516655024.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:44.199Z,1516655024.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:44.562Z,1516655024.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:44.955Z,1516655024.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:44.995Z,1516655024.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:45.353Z,1516655025.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:45.805Z,1516655025.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:45.837Z,1516655025.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:46.172Z,1516655026.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:46.211Z,1516655026.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:46.570Z,1516655026.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:46.965Z,1516655026.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:47.007Z,1516655027.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:47.352Z,1516655027.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:47.790Z,1516655027.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:47.805Z,1516655027.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:48.160Z,1516655028.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:48.243Z,1516655028.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:48.565Z,1516655028.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:48.964Z,1516655028.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:49.039Z,1516655029.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:49.365Z,1516655029.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:49.759Z,1516655029.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:49.836Z,1516655029.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:50.160Z,1516655030.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:50.239Z,1516655030.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:50.556Z,1516655030.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:50.952Z,1516655030.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:51.036Z,1516655031.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:51.356Z,1516655031.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:51.765Z,1516655031.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:51.831Z,1516655031.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:52.165Z,1516655032.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:52.235Z,1516655032.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:52.566Z,1516655032.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:52.960Z,1516655032.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:53.032Z,1516655033.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:53.357Z,1516655033.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:53.761Z,1516655033.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:53.827Z,1516655033.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:54.168Z,1516655034.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:54.231Z,1516655034.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:54.566Z,1516655034.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:54.968Z,1516655034.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:55.027Z,1516655035.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:55.366Z,1516655035.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:55.761Z,1516655035.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:55.823Z,1516655035.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:56.164Z,1516655036.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:56.227Z,1516655036.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:56.563Z,1516655036.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:56.957Z,1516655036.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:57.023Z,1516655037.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:57.364Z,1516655037.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:57.780Z,1516655037.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:57.819Z,1516655037.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:58.175Z,1516655038.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:58.223Z,1516655038.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:58.573Z,1516655038.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:58.948Z,1516655038.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:59.019Z,1516655039.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:03:59.356Z,1516655039.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:59.756Z,1516655039.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:03:59.817Z,1516655039.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:00.168Z,1516655040.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:00.240Z,1516655040.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:00.566Z,1516655040.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:00.966Z,1516655040.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:01.035Z,1516655041.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:01.377Z,1516655041.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:01.752Z,1516655041.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:01.833Z,1516655041.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:02.152Z,1516655042.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:02.243Z,1516655042.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:02.550Z,1516655042.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:02.952Z,1516655042.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:03.039Z,1516655043.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:03.355Z,1516655043.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:03.760Z,1516655043.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:03.835Z,1516655043.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:04.166Z,1516655044.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:04.239Z,1516655044.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:04.564Z,1516655044.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:04.952Z,1516655044.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:05.035Z,1516655045.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:05.372Z,1516655045.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:05.760Z,1516655045.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:05.832Z,1516655045.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:06.161Z,1516655046.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:06.235Z,1516655046.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:06.567Z,1516655046.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:06.968Z,1516655046.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:07.031Z,1516655047.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:07.366Z,1516655047.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:07.759Z,1516655047.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:07.827Z,1516655047.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:08.152Z,1516655048.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:08.231Z,1516655048.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:08.564Z,1516655048.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:08.961Z,1516655048.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:09.027Z,1516655049.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:09.362Z,1516655049.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:09.780Z,1516655049.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:09.823Z,1516655049.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:10.168Z,1516655050.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:10.227Z,1516655050.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:10.567Z,1516655050.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:10.964Z,1516655050.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:11.023Z,1516655051.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:11.361Z,1516655051.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:11.761Z,1516655051.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:11.819Z,1516655051.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:12.164Z,1516655052.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:12.223Z,1516655052.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:12.567Z,1516655052.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:12.973Z,1516655052.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:13.019Z,1516655053.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:13.372Z,1516655053.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:13.752Z,1516655053.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:13.817Z,1516655053.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:14.172Z,1516655054.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:14.239Z,1516655054.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:14.564Z,1516655054.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:14.945Z,1516655054.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:15.035Z,1516655055.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:15.348Z,1516655055.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:15.774Z,1516655055.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:15.833Z,1516655055.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:16.180Z,1516655056.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:16.255Z,1516655056.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:16.584Z,1516655056.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:16.956Z,1516655056.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:17.051Z,1516655057.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:17.348Z,1516655057.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:17.756Z,1516655057.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:17.847Z,1516655057.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:18.157Z,1516655058.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:18.251Z,1516655058.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:18.558Z,1516655058.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:18.957Z,1516655058.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:19.047Z,1516655059.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:19.358Z,1516655059.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:19.756Z,1516655059.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:19.843Z,1516655059.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:20.159Z,1516655060.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:20.247Z,1516655060.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:20.561Z,1516655060.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:20.954Z,1516655060.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:21.043Z,1516655061.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:21.355Z,1516655061.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:21.766Z,1516655061.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:21.839Z,1516655061.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:22.172Z,1516655062.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:22.243Z,1516655062.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:22.566Z,1516655062.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:22.966Z,1516655062.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:23.039Z,1516655063.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:23.354Z,1516655063.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:23.761Z,1516655063.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:23.835Z,1516655063.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:24.168Z,1516655064.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:24.239Z,1516655064.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:24.572Z,1516655064.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:24.976Z,1516655064.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:25.035Z,1516655065.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:25.366Z,1516655065.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:25.756Z,1516655065.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:25.832Z,1516655065.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:26.151Z,1516655066.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:26.235Z,1516655066.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:26.560Z,1516655066.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:26.960Z,1516655066.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:27.032Z,1516655067.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:27.351Z,1516655067.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:27.776Z,1516655067.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:27.829Z,1516655067.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:28.165Z,1516655068.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:28.263Z,1516655068.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:28.565Z,1516655068.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:29.059Z,1516655069.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:29.857Z,1516655069.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:30.287Z,1516655070.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:31.084Z,1516655071.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:31.879Z,1516655071.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:31.906Z,1516655071.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:32.047Z,1516655072.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:32.285Z,1516655072.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:32.398Z,1516655072.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:32.806Z,1516655072.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:33.079Z,1516655073.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:33.178Z,1516655073.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:33.609Z,1516655073.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:33.875Z,1516655073.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:33.973Z,1516655073.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:34.279Z,1516655074.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:34.370Z,1516655074.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:34.786Z,1516655074.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:35.075Z,1516655075.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:35.177Z,1516655075.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:35.603Z,1516655075.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:35.872Z,1516655075.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:35.972Z,1516655075.972 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:04:35.972Z,1516655075.972 [BPC1] Communications Fault, FailCount= 1
2018-01-22T21:04:35.972Z,1516655075.972 [BPC1](ERROR): Communications Fault
2018-01-22T21:04:35.979Z,1516655075.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:36.004Z,1516655076.004 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:04:36.340Z,1516655076.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:36.385Z,1516655076.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:36.773Z,1516655076.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:37.135Z,1516655077.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:37.176Z,1516655077.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:37.189Z,1516655077.189 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:04:37.189Z,1516655077.189 [BPC1] No Fault, FailCount= 1
2018-01-22T21:04:37.673Z,1516655077.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:37.931Z,1516655077.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:37.992Z,1516655077.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:38.335Z,1516655078.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:38.392Z,1516655078.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:38.781Z,1516655078.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:39.131Z,1516655079.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:39.184Z,1516655079.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:39.632Z,1516655079.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:39.927Z,1516655079.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:39.965Z,1516655079.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:40.331Z,1516655080.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:40.373Z,1516655080.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:40.785Z,1516655080.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:41.127Z,1516655081.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:41.184Z,1516655081.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:41.576Z,1516655081.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:41.948Z,1516655081.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:41.977Z,1516655081.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:42.363Z,1516655082.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:42.380Z,1516655082.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:42.776Z,1516655082.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:43.160Z,1516655083.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:43.182Z,1516655083.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:43.587Z,1516655083.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:43.955Z,1516655083.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:43.999Z,1516655083.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:44.359Z,1516655084.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:44.397Z,1516655084.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:44.779Z,1516655084.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:45.155Z,1516655085.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:45.181Z,1516655085.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:45.634Z,1516655085.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:45.951Z,1516655085.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:45.992Z,1516655085.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:46.355Z,1516655086.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:46.381Z,1516655086.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:46.795Z,1516655086.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:47.151Z,1516655087.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:47.200Z,1516655087.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:47.632Z,1516655087.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:47.947Z,1516655087.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:47.970Z,1516655087.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:48.352Z,1516655088.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:48.369Z,1516655088.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:48.772Z,1516655088.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:49.150Z,1516655089.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:49.176Z,1516655089.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:49.647Z,1516655089.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:49.945Z,1516655089.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:49.976Z,1516655089.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:50.351Z,1516655090.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:50.385Z,1516655090.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:50.779Z,1516655090.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:51.147Z,1516655091.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:51.175Z,1516655091.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:51.637Z,1516655091.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:51.944Z,1516655091.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:51.981Z,1516655091.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:52.348Z,1516655092.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:52.384Z,1516655092.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:52.807Z,1516655092.807 [BPC1](INFO): Initialized
2018-01-22T21:04:52.824Z,1516655092.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:53.143Z,1516655093.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:53.192Z,1516655093.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:53.649Z,1516655093.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:53.942Z,1516655093.942 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:53.992Z,1516655093.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:54.348Z,1516655094.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:54.381Z,1516655094.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:54.780Z,1516655094.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:55.145Z,1516655095.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:55.184Z,1516655095.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:55.596Z,1516655095.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:55.939Z,1516655095.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:55.998Z,1516655095.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:56.343Z,1516655096.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:56.396Z,1516655096.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:56.784Z,1516655096.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:57.140Z,1516655097.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:57.180Z,1516655097.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:57.564Z,1516655097.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:57.936Z,1516655097.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:58.012Z,1516655098.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:58.343Z,1516655098.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:58.372Z,1516655098.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:58.793Z,1516655098.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:59.139Z,1516655099.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:59.204Z,1516655099.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:59.644Z,1516655099.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:04:59.935Z,1516655099.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:04:59.988Z,1516655099.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:00.339Z,1516655100.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:00.379Z,1516655100.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:00.774Z,1516655100.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:01.135Z,1516655101.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:01.184Z,1516655101.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:01.645Z,1516655101.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:01.931Z,1516655101.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:01.993Z,1516655101.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:02.335Z,1516655102.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:02.392Z,1516655102.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:02.781Z,1516655102.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:03.131Z,1516655103.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:03.165Z,1516655103.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:03.640Z,1516655103.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:03.927Z,1516655103.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:03.966Z,1516655103.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:04.331Z,1516655104.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:04.385Z,1516655104.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:04.778Z,1516655104.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:05.127Z,1516655105.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:05.184Z,1516655105.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:05.633Z,1516655105.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:05.935Z,1516655105.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:05.988Z,1516655105.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:06.339Z,1516655106.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:06.388Z,1516655106.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:06.774Z,1516655106.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:07.135Z,1516655107.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:07.180Z,1516655107.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:07.586Z,1516655107.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:07.931Z,1516655107.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:08.002Z,1516655108.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:08.335Z,1516655108.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:08.396Z,1516655108.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:08.777Z,1516655108.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:09.131Z,1516655109.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:09.165Z,1516655109.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:09.592Z,1516655109.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:09.928Z,1516655109.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:10.029Z,1516655110.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:10.351Z,1516655110.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:10.365Z,1516655110.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:10.789Z,1516655110.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:11.147Z,1516655111.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:11.208Z,1516655111.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:11.584Z,1516655111.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:11.959Z,1516655111.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:12.026Z,1516655112.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:12.367Z,1516655112.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:12.379Z,1516655112.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:12.773Z,1516655112.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:13.163Z,1516655113.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:13.175Z,1516655113.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:13.661Z,1516655113.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:13.959Z,1516655113.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:13.978Z,1516655113.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:14.363Z,1516655114.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:14.406Z,1516655114.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:14.772Z,1516655114.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:15.159Z,1516655115.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:15.184Z,1516655115.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:15.642Z,1516655115.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:15.955Z,1516655115.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:15.980Z,1516655115.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:16.359Z,1516655116.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:16.374Z,1516655116.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:16.788Z,1516655116.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:17.156Z,1516655117.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:17.185Z,1516655117.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:17.645Z,1516655117.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:17.951Z,1516655117.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:17.996Z,1516655117.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:18.355Z,1516655118.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:18.385Z,1516655118.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:18.782Z,1516655118.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:19.151Z,1516655119.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:19.181Z,1516655119.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:19.661Z,1516655119.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:19.947Z,1516655119.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:20.004Z,1516655120.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:20.351Z,1516655120.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:20.396Z,1516655120.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:20.769Z,1516655120.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:21.148Z,1516655121.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:21.170Z,1516655121.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:21.572Z,1516655121.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:21.944Z,1516655121.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:21.992Z,1516655121.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:22.348Z,1516655122.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:22.374Z,1516655122.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:22.796Z,1516655122.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:23.144Z,1516655123.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:23.196Z,1516655123.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:23.595Z,1516655123.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:23.941Z,1516655123.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:24.034Z,1516655124.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:24.384Z,1516655124.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:24.431Z,1516655124.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:24.766Z,1516655124.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:25.169Z,1516655125.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:25.227Z,1516655125.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:25.593Z,1516655125.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:26.027Z,1516655126.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:26.043Z,1516655126.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:26.394Z,1516655126.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:26.431Z,1516655126.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:26.768Z,1516655126.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:27.168Z,1516655127.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:27.228Z,1516655127.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:27.578Z,1516655127.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:28.010Z,1516655128.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:28.023Z,1516655128.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:28.378Z,1516655128.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:28.427Z,1516655128.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:28.784Z,1516655128.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:29.223Z,1516655129.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:30.019Z,1516655130.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:30.423Z,1516655130.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:31.219Z,1516655131.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:32.015Z,1516655132.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:32.068Z,1516655132.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:32.212Z,1516655132.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:32.419Z,1516655132.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:32.564Z,1516655132.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:32.955Z,1516655132.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:33.215Z,1516655133.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:33.332Z,1516655133.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:33.755Z,1516655133.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:34.011Z,1516655134.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:34.132Z,1516655134.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:34.415Z,1516655134.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:34.558Z,1516655134.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:34.946Z,1516655134.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:35.211Z,1516655135.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:35.342Z,1516655135.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:35.763Z,1516655135.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:36.007Z,1516655136.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:36.144Z,1516655136.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:36.411Z,1516655136.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:36.550Z,1516655136.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:36.952Z,1516655136.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:37.207Z,1516655137.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:37.349Z,1516655137.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:37.748Z,1516655137.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:38.004Z,1516655138.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:38.138Z,1516655138.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:38.407Z,1516655138.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:38.558Z,1516655138.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:38.959Z,1516655138.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:39.203Z,1516655139.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:39.349Z,1516655139.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:39.744Z,1516655139.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:40.001Z,1516655140.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:40.150Z,1516655140.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:40.411Z,1516655140.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:40.525Z,1516655140.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:40.961Z,1516655140.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:41.207Z,1516655141.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:41.361Z,1516655141.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:41.756Z,1516655141.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:42.003Z,1516655142.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:42.127Z,1516655142.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:42.407Z,1516655142.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:42.528Z,1516655142.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:42.932Z,1516655142.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:43.203Z,1516655143.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:43.336Z,1516655143.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:43.761Z,1516655143.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:44.003Z,1516655144.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:44.154Z,1516655144.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:44.411Z,1516655144.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:44.553Z,1516655144.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:44.936Z,1516655144.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:45.207Z,1516655145.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:45.336Z,1516655145.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:45.735Z,1516655145.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:46.003Z,1516655146.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:46.133Z,1516655146.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:46.407Z,1516655146.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:46.529Z,1516655146.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:46.942Z,1516655146.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:47.203Z,1516655147.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:47.365Z,1516655147.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:47.766Z,1516655147.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:47.999Z,1516655147.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:48.135Z,1516655148.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:48.403Z,1516655148.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:48.540Z,1516655148.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:48.932Z,1516655148.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:48.945Z,1516655148.945 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T21:05:49.199Z,1516655149.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:49.340Z,1516655149.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:49.784Z,1516655149.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:49.998Z,1516655149.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:50.165Z,1516655150.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:50.403Z,1516655150.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:50.545Z,1516655150.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:50.939Z,1516655150.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:51.199Z,1516655151.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:51.331Z,1516655151.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:51.742Z,1516655151.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:52.000Z,1516655152.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:52.140Z,1516655152.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:52.431Z,1516655152.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:52.535Z,1516655152.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:52.896Z,1516655152.896 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-01-22T21:05:52.896Z,1516655152.896 [DropWeight] Hardware Fault, FailCount= 1
2018-01-22T21:05:52.896Z,1516655152.896 [DropWeight](ERROR): Hardware Fault
2018-01-22T21:05:52.956Z,1516655152.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:52.976Z,1516655152.976 [CBIT](INFO): Critical error at 20180122T210552
2018-01-22T21:05:52.978Z,1516655152.978 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-01-22T21:05:52.978Z,1516655152.978 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-01-22T21:05:53.228Z,1516655153.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:53.348Z,1516655153.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:53.385Z,1516655153.385 [CBIT](INFO): Critical error at 20180122T210552
2018-01-22T21:05:53.743Z,1516655153.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:54.025Z,1516655154.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:54.141Z,1516655154.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:54.435Z,1516655154.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:54.540Z,1516655154.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:54.936Z,1516655154.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:55.231Z,1516655155.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:55.337Z,1516655155.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:55.744Z,1516655155.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:56.027Z,1516655156.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:56.146Z,1516655156.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:56.431Z,1516655156.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:56.548Z,1516655156.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:56.936Z,1516655156.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:57.227Z,1516655157.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:57.331Z,1516655157.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:57.746Z,1516655157.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:58.023Z,1516655158.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:58.148Z,1516655158.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:58.427Z,1516655158.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:58.536Z,1516655158.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:58.948Z,1516655158.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:59.223Z,1516655159.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:05:59.352Z,1516655159.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:05:59.748Z,1516655159.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:00.019Z,1516655160.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:00.143Z,1516655160.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:00.423Z,1516655160.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:00.547Z,1516655160.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:00.937Z,1516655160.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:01.219Z,1516655161.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:01.340Z,1516655161.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:01.760Z,1516655161.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:02.016Z,1516655162.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:02.148Z,1516655162.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:02.419Z,1516655162.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:02.552Z,1516655162.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:02.951Z,1516655162.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:03.217Z,1516655163.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:03.335Z,1516655163.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:03.794Z,1516655163.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:04.011Z,1516655164.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:04.157Z,1516655164.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:04.415Z,1516655164.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:04.535Z,1516655164.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:04.945Z,1516655164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:05.211Z,1516655165.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:05.359Z,1516655165.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:05.745Z,1516655165.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:06.009Z,1516655166.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:06.135Z,1516655166.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:06.455Z,1516655166.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:06.544Z,1516655166.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:06.937Z,1516655166.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:07.251Z,1516655167.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:07.334Z,1516655167.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:07.757Z,1516655167.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:08.049Z,1516655168.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:08.148Z,1516655168.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:08.455Z,1516655168.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:08.546Z,1516655168.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:08.944Z,1516655168.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:09.251Z,1516655169.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:09.339Z,1516655169.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:09.760Z,1516655169.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:10.047Z,1516655170.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:10.148Z,1516655170.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:10.451Z,1516655170.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:10.545Z,1516655170.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:10.945Z,1516655170.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:11.247Z,1516655171.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:11.349Z,1516655171.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:11.764Z,1516655171.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:12.043Z,1516655172.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:12.145Z,1516655172.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:12.447Z,1516655172.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:12.547Z,1516655172.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:12.944Z,1516655172.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:13.243Z,1516655173.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:13.348Z,1516655173.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:13.772Z,1516655173.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:14.039Z,1516655174.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:14.146Z,1516655174.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:14.443Z,1516655174.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:14.546Z,1516655174.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:14.928Z,1516655174.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:15.241Z,1516655175.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:15.332Z,1516655175.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:15.769Z,1516655175.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:16.035Z,1516655176.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:16.148Z,1516655176.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:16.439Z,1516655176.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:16.548Z,1516655176.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:16.949Z,1516655176.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:17.235Z,1516655177.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:17.350Z,1516655177.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:17.797Z,1516655177.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:18.031Z,1516655178.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:18.148Z,1516655178.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:18.435Z,1516655178.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:18.544Z,1516655178.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:18.945Z,1516655178.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:19.233Z,1516655179.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:19.349Z,1516655179.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:19.758Z,1516655179.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:20.029Z,1516655180.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:20.156Z,1516655180.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:20.475Z,1516655180.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:20.561Z,1516655180.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:20.930Z,1516655180.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:21.271Z,1516655181.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:21.340Z,1516655181.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:21.736Z,1516655181.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:22.069Z,1516655182.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:22.168Z,1516655182.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:22.475Z,1516655182.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:22.537Z,1516655182.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:22.944Z,1516655182.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:23.271Z,1516655183.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:23.349Z,1516655183.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:23.776Z,1516655183.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:24.067Z,1516655184.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:24.141Z,1516655184.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:24.471Z,1516655184.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:24.591Z,1516655184.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:24.936Z,1516655184.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:25.269Z,1516655185.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:25.342Z,1516655185.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:25.792Z,1516655185.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:26.063Z,1516655186.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:26.151Z,1516655186.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:26.467Z,1516655186.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:26.545Z,1516655186.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:26.940Z,1516655186.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:27.263Z,1516655187.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:27.335Z,1516655187.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:27.788Z,1516655187.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:27.792Z,1516655187.792 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T21:06:27.792Z,1516655187.792 [Default:CheckIn:C.Wait] Stopped
2018-01-22T21:06:27.792Z,1516655187.792 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T21:06:27.792Z,1516655187.792 [Default:CheckIn:D] Running Loop=1
2018-01-22T21:06:28.059Z,1516655188.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:28.144Z,1516655188.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:28.151Z,1516655188.151 [Default:CheckIn:D] Stopped
2018-01-22T21:06:28.152Z,1516655188.152 [Default:CheckIn:E] Running Loop=1
2018-01-22T21:06:28.463Z,1516655188.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:28.545Z,1516655188.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:28.548Z,1516655188.548 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.057715 min 
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn:E] Stopped
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn] Stopped
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn](INFO): Running loop #17
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn] Running Loop=17
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T21:06:28.549Z,1516655188.549 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T21:06:28.950Z,1516655188.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:29.259Z,1516655189.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:30.055Z,1516655190.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:30.459Z,1516655190.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:31.255Z,1516655191.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:32.051Z,1516655192.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:32.269Z,1516655192.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:32.382Z,1516655192.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:32.455Z,1516655192.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:32.773Z,1516655192.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:33.179Z,1516655193.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:33.251Z,1516655193.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:33.576Z,1516655193.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:33.976Z,1516655193.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:34.049Z,1516655194.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:34.384Z,1516655194.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:34.499Z,1516655194.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:34.776Z,1516655194.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:35.174Z,1516655195.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:35.295Z,1516655195.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:35.576Z,1516655195.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:35.974Z,1516655195.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:36.093Z,1516655196.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:36.384Z,1516655196.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:36.499Z,1516655196.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:36.785Z,1516655196.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:37.180Z,1516655197.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:37.295Z,1516655197.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:37.578Z,1516655197.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:37.972Z,1516655197.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:38.091Z,1516655198.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:38.374Z,1516655198.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:38.495Z,1516655198.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:38.778Z,1516655198.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:39.182Z,1516655199.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:39.291Z,1516655199.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:39.569Z,1516655199.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:39.979Z,1516655199.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:40.087Z,1516655200.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:40.404Z,1516655200.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:40.491Z,1516655200.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:40.792Z,1516655200.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:41.173Z,1516655201.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:41.287Z,1516655201.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:41.564Z,1516655201.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:41.972Z,1516655201.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:42.083Z,1516655202.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:42.372Z,1516655202.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:42.487Z,1516655202.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:42.775Z,1516655202.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.174Z,1516655203.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.285Z,1516655203.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:43.570Z,1516655203.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.972Z,1516655203.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.972Z,1516655203.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-01-22T21:06:43.972Z,1516655203.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:06:43.974Z,1516655203.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.974Z,1516655203.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-01-22T21:06:43.974Z,1516655203.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:06:43.977Z,1516655203.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:43.977Z,1516655203.977 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-01-22T21:06:43.977Z,1516655203.977 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:06:44.014Z,1516655204.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:06:44.014Z,1516655204.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:06:44.014Z,1516655204.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:06:44.079Z,1516655204.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:44.389Z,1516655204.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:06:44.389Z,1516655204.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-01-22T21:06:44.389Z,1516655204.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:06:44.389Z,1516655204.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-01-22T21:06:44.390Z,1516655204.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:06:44.390Z,1516655204.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-01-22T21:06:44.483Z,1516655204.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:44.764Z,1516655204.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:06:44.765Z,1516655204.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:06:44.765Z,1516655204.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:06:44.765Z,1516655204.765 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:06:44.766Z,1516655204.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:06:44.766Z,1516655204.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:06:44.767Z,1516655204.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:06:44.767Z,1516655204.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:06:44.767Z,1516655204.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:06:45.189Z,1516655205.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:45.279Z,1516655205.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:45.578Z,1516655205.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:45.978Z,1516655205.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:46.075Z,1516655206.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:46.388Z,1516655206.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:46.479Z,1516655206.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:46.788Z,1516655206.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:47.177Z,1516655207.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:47.275Z,1516655207.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:47.584Z,1516655207.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:47.961Z,1516655207.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:48.074Z,1516655208.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:48.377Z,1516655208.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:48.543Z,1516655208.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:48.780Z,1516655208.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:49.196Z,1516655209.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:49.339Z,1516655209.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:49.592Z,1516655209.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:49.999Z,1516655209.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:50.135Z,1516655210.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:50.373Z,1516655210.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:50.563Z,1516655210.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:50.800Z,1516655210.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:51.196Z,1516655211.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:51.359Z,1516655211.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:51.572Z,1516655211.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:52.005Z,1516655212.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:52.155Z,1516655212.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:52.405Z,1516655212.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:52.559Z,1516655212.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:52.777Z,1516655212.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:53.186Z,1516655213.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:53.355Z,1516655213.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:53.588Z,1516655213.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:53.976Z,1516655213.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:54.152Z,1516655214.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:54.373Z,1516655214.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:54.555Z,1516655214.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:54.792Z,1516655214.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:55.199Z,1516655215.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:55.351Z,1516655215.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:55.593Z,1516655215.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:55.988Z,1516655215.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:56.148Z,1516655216.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:56.381Z,1516655216.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:56.551Z,1516655216.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:56.796Z,1516655216.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:57.236Z,1516655217.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:57.347Z,1516655217.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:57.580Z,1516655217.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:57.992Z,1516655217.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:58.143Z,1516655218.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:58.400Z,1516655218.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:58.547Z,1516655218.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:58.792Z,1516655218.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:59.168Z,1516655219.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:59.343Z,1516655219.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:06:59.584Z,1516655219.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:06:59.988Z,1516655219.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:00.139Z,1516655220.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:00.377Z,1516655220.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:00.543Z,1516655220.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:00.784Z,1516655220.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:01.192Z,1516655221.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:01.339Z,1516655221.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:01.584Z,1516655221.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:01.976Z,1516655221.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:02.136Z,1516655222.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:02.360Z,1516655222.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:02.543Z,1516655222.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:02.787Z,1516655222.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:03.186Z,1516655223.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:03.339Z,1516655223.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:03.577Z,1516655223.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:03.990Z,1516655223.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:04.136Z,1516655224.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:04.374Z,1516655224.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:04.539Z,1516655224.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:04.799Z,1516655224.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:05.180Z,1516655225.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:05.335Z,1516655225.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:05.576Z,1516655225.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:05.965Z,1516655225.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:06.133Z,1516655226.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:06.380Z,1516655226.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:06.539Z,1516655226.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:06.775Z,1516655226.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:07.182Z,1516655227.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:07.337Z,1516655227.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:07.576Z,1516655227.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:07.973Z,1516655227.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:08.131Z,1516655228.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:08.376Z,1516655228.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:08.535Z,1516655228.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:08.779Z,1516655228.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:09.189Z,1516655229.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:09.331Z,1516655229.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:09.568Z,1516655229.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:09.972Z,1516655229.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:10.127Z,1516655230.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:10.378Z,1516655230.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:10.778Z,1516655230.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:10.923Z,1516655230.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:11.165Z,1516655231.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:11.567Z,1516655231.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:11.719Z,1516655231.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:11.984Z,1516655231.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:12.368Z,1516655232.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:12.515Z,1516655232.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:12.847Z,1516655232.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:13.180Z,1516655233.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:13.311Z,1516655233.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:13.576Z,1516655233.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:13.964Z,1516655233.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:14.107Z,1516655234.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:14.370Z,1516655234.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:14.765Z,1516655234.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:14.903Z,1516655234.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:15.172Z,1516655235.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:15.566Z,1516655235.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:15.699Z,1516655235.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:15.989Z,1516655235.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:16.105Z,1516655236.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:16.392Z,1516655236.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:16.515Z,1516655236.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:16.788Z,1516655236.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:16.919Z,1516655236.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:17.181Z,1516655237.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:17.323Z,1516655237.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:17.585Z,1516655237.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:17.977Z,1516655237.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:18.124Z,1516655238.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:18.375Z,1516655238.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:18.555Z,1516655238.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:18.787Z,1516655238.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:19.189Z,1516655239.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:19.351Z,1516655239.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:19.584Z,1516655239.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:19.977Z,1516655239.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:20.148Z,1516655240.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:20.372Z,1516655240.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:20.551Z,1516655240.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:20.782Z,1516655240.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:21.180Z,1516655241.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:21.347Z,1516655241.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:21.582Z,1516655241.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:21.980Z,1516655241.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:22.143Z,1516655242.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:22.396Z,1516655242.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:22.547Z,1516655242.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:22.785Z,1516655242.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:23.184Z,1516655243.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:23.343Z,1516655243.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:23.562Z,1516655243.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:23.988Z,1516655243.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:24.139Z,1516655244.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:24.367Z,1516655244.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:24.543Z,1516655244.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:24.793Z,1516655244.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:25.188Z,1516655245.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:25.339Z,1516655245.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:25.595Z,1516655245.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:25.000Z,1516655246.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:26.135Z,1516655246.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:26.372Z,1516655246.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:26.539Z,1516655246.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:26.772Z,1516655246.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:27.195Z,1516655247.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:27.335Z,1516655247.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:27.576Z,1516655247.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:27.975Z,1516655247.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:28.133Z,1516655248.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:28.376Z,1516655248.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:28.539Z,1516655248.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:28.797Z,1516655248.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:29.181Z,1516655249.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:29.337Z,1516655249.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:30.133Z,1516655250.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:30.587Z,1516655250.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:31.383Z,1516655251.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:32.179Z,1516655252.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:32.603Z,1516655252.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:32.606Z,1516655252.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:32.728Z,1516655252.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:33.107Z,1516655253.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:33.399Z,1516655253.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:33.518Z,1516655253.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:33.912Z,1516655253.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:34.195Z,1516655254.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:34.283Z,1516655254.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:34.599Z,1516655254.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:34.687Z,1516655254.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:35.090Z,1516655255.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:35.395Z,1516655255.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:35.482Z,1516655255.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:35.922Z,1516655255.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:36.191Z,1516655256.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:36.290Z,1516655256.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:36.595Z,1516655256.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:36.685Z,1516655256.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:37.092Z,1516655257.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:37.391Z,1516655257.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:37.483Z,1516655257.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:37.889Z,1516655257.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:38.187Z,1516655258.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:38.292Z,1516655258.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:38.591Z,1516655258.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:38.690Z,1516655258.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:39.092Z,1516655259.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:39.387Z,1516655259.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:39.490Z,1516655259.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:39.896Z,1516655259.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:40.183Z,1516655260.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:40.292Z,1516655260.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:40.587Z,1516655260.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:40.685Z,1516655260.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:41.090Z,1516655261.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:41.383Z,1516655261.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:41.490Z,1516655261.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:41.940Z,1516655261.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:42.179Z,1516655262.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:42.307Z,1516655262.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:42.583Z,1516655262.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:42.695Z,1516655262.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:43.092Z,1516655263.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:43.381Z,1516655263.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:43.477Z,1516655263.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:43.881Z,1516655263.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:44.177Z,1516655264.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:44.308Z,1516655264.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:44.599Z,1516655264.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:44.688Z,1516655264.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:45.086Z,1516655265.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:45.397Z,1516655265.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:45.490Z,1516655265.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:45.886Z,1516655265.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:46.193Z,1516655266.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:46.288Z,1516655266.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:46.603Z,1516655266.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:46.687Z,1516655266.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:47.084Z,1516655267.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:47.399Z,1516655267.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:47.482Z,1516655267.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:47.924Z,1516655267.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:48.195Z,1516655268.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:48.290Z,1516655268.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:48.599Z,1516655268.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:48.692Z,1516655268.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:49.086Z,1516655269.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:49.395Z,1516655269.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:49.488Z,1516655269.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:49.898Z,1516655269.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:50.191Z,1516655270.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:50.296Z,1516655270.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:50.595Z,1516655270.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:50.694Z,1516655270.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:51.096Z,1516655271.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:51.391Z,1516655271.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:51.511Z,1516655271.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:51.915Z,1516655271.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:52.187Z,1516655272.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:52.293Z,1516655272.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:52.591Z,1516655272.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:52.695Z,1516655272.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:53.093Z,1516655273.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:53.387Z,1516655273.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:53.497Z,1516655273.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:53.922Z,1516655273.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:54.183Z,1516655274.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:54.298Z,1516655274.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:54.587Z,1516655274.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:54.690Z,1516655274.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:55.091Z,1516655275.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:55.383Z,1516655275.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:55.483Z,1516655275.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:55.944Z,1516655275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:56.181Z,1516655276.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:56.277Z,1516655276.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:56.587Z,1516655276.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:56.675Z,1516655276.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:57.098Z,1516655277.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:57.383Z,1516655277.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:57.505Z,1516655277.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:57.900Z,1516655277.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:58.181Z,1516655278.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:58.308Z,1516655278.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:58.619Z,1516655278.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:58.684Z,1516655278.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:59.084Z,1516655279.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:59.415Z,1516655279.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:07:59.480Z,1516655279.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:07:59.886Z,1516655279.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:00.213Z,1516655280.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:00.303Z,1516655280.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:00.623Z,1516655280.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:00.702Z,1516655280.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:01.084Z,1516655281.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:01.419Z,1516655281.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:01.485Z,1516655281.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:01.918Z,1516655281.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:02.215Z,1516655282.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:02.291Z,1516655282.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:02.619Z,1516655282.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:02.691Z,1516655282.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:03.092Z,1516655283.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:03.415Z,1516655283.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:03.489Z,1516655283.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:03.926Z,1516655283.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:04.211Z,1516655284.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:04.296Z,1516655284.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:04.615Z,1516655284.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:04.688Z,1516655284.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:05.086Z,1516655285.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:05.414Z,1516655285.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:05.493Z,1516655285.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:05.944Z,1516655285.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:06.207Z,1516655286.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:06.295Z,1516655286.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:06.611Z,1516655286.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:06.693Z,1516655286.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:07.087Z,1516655287.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:07.407Z,1516655287.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:07.492Z,1516655287.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:07.935Z,1516655287.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:08.203Z,1516655288.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:08.291Z,1516655288.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:08.607Z,1516655288.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:08.683Z,1516655288.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:09.094Z,1516655289.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:09.403Z,1516655289.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:09.497Z,1516655289.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:09.958Z,1516655289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:10.199Z,1516655290.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:10.288Z,1516655290.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:10.603Z,1516655290.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:10.696Z,1516655290.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:11.092Z,1516655291.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:11.399Z,1516655291.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:11.500Z,1516655291.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:11.897Z,1516655291.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:12.197Z,1516655292.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:12.305Z,1516655292.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:12.651Z,1516655292.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:12.697Z,1516655292.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:13.100Z,1516655293.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:13.451Z,1516655293.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:13.496Z,1516655293.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:13.880Z,1516655293.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:14.247Z,1516655294.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:14.309Z,1516655294.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:14.651Z,1516655294.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:14.708Z,1516655294.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:15.105Z,1516655295.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:15.447Z,1516655295.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:15.508Z,1516655295.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:15.933Z,1516655295.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:16.243Z,1516655296.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:16.288Z,1516655296.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:16.647Z,1516655296.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:16.699Z,1516655296.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:17.082Z,1516655297.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:17.443Z,1516655297.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:17.501Z,1516655297.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:17.941Z,1516655297.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:18.239Z,1516655298.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:18.307Z,1516655298.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:18.643Z,1516655298.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:18.701Z,1516655298.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:19.086Z,1516655299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:19.439Z,1516655299.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:19.491Z,1516655299.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:19.949Z,1516655299.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:20.247Z,1516655300.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:20.300Z,1516655300.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:20.651Z,1516655300.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:20.680Z,1516655300.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:21.105Z,1516655301.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:21.448Z,1516655301.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:21.508Z,1516655301.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:21.944Z,1516655301.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:22.243Z,1516655302.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:22.308Z,1516655302.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:22.650Z,1516655302.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:22.677Z,1516655302.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:23.085Z,1516655303.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:23.443Z,1516655303.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:23.492Z,1516655303.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:23.887Z,1516655303.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:24.239Z,1516655304.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:24.300Z,1516655304.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:24.643Z,1516655304.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:24.703Z,1516655304.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:25.088Z,1516655305.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:25.439Z,1516655305.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:25.496Z,1516655305.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:25.888Z,1516655305.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:26.253Z,1516655306.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:26.328Z,1516655306.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:26.692Z,1516655306.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:26.707Z,1516655306.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:27.093Z,1516655307.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:27.497Z,1516655307.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:27.503Z,1516655307.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:27.900Z,1516655307.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:28.299Z,1516655308.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:28.303Z,1516655308.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:28.696Z,1516655308.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:28.711Z,1516655308.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:29.152Z,1516655309.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:29.492Z,1516655309.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:29.507Z,1516655309.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:30.303Z,1516655310.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:30.707Z,1516655310.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:31.503Z,1516655311.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:32.300Z,1516655312.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:32.703Z,1516655312.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:32.842Z,1516655312.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:32.963Z,1516655312.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:33.318Z,1516655313.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:33.499Z,1516655313.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:33.710Z,1516655313.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:34.119Z,1516655314.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:34.295Z,1516655314.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:34.520Z,1516655314.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:34.699Z,1516655314.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:34.921Z,1516655314.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:35.322Z,1516655315.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:35.495Z,1516655315.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:35.715Z,1516655315.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:36.109Z,1516655316.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:36.291Z,1516655316.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:36.519Z,1516655316.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:36.695Z,1516655316.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:36.920Z,1516655316.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:37.311Z,1516655317.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:37.491Z,1516655317.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:37.712Z,1516655317.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:38.117Z,1516655318.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:38.287Z,1516655318.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:38.526Z,1516655318.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:38.691Z,1516655318.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:38.924Z,1516655318.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:39.316Z,1516655319.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:39.489Z,1516655319.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:39.714Z,1516655319.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:40.119Z,1516655320.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:40.284Z,1516655320.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:40.512Z,1516655320.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:40.687Z,1516655320.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:40.936Z,1516655320.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:41.329Z,1516655321.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:41.483Z,1516655321.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:41.720Z,1516655321.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:42.120Z,1516655322.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:42.281Z,1516655322.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:42.521Z,1516655322.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:42.687Z,1516655322.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:42.902Z,1516655322.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:43.310Z,1516655323.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:43.483Z,1516655323.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:43.707Z,1516655323.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:44.128Z,1516655324.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:44.279Z,1516655324.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:44.540Z,1516655324.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:44.683Z,1516655324.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:44.924Z,1516655324.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:45.313Z,1516655325.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:45.714Z,1516655325.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:46.116Z,1516655326.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:46.514Z,1516655326.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:46.915Z,1516655326.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:47.319Z,1516655327.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:47.713Z,1516655327.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:48.118Z,1516655328.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:48.520Z,1516655328.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:48.939Z,1516655328.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:49.310Z,1516655329.310 [PNI_TCM](ERROR): CRC does not match. Expected:0x35357 got:0x7361
2018-01-22T21:08:49.339Z,1516655329.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:49.714Z,1516655329.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:50.126Z,1516655330.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:50.522Z,1516655330.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:50.924Z,1516655330.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:51.324Z,1516655331.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:51.467Z,1516655331.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:51.716Z,1516655331.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:52.122Z,1516655332.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:52.263Z,1516655332.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:52.521Z,1516655332.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:52.667Z,1516655332.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:52.913Z,1516655332.913 [PNI_TCM](ERROR): CRC does not match. Expected:0x5430 got:0x7489
2018-01-22T21:08:52.933Z,1516655332.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:53.321Z,1516655333.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:53.463Z,1516655333.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:53.745Z,1516655333.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:54.121Z,1516655334.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:54.261Z,1516655334.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:54.506Z,1516655334.506 [PNI_TCM](ERROR): CRC does not match. Expected:0x37101 got:0x9637
2018-01-22T21:08:54.528Z,1516655334.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:54.707Z,1516655334.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:54.911Z,1516655334.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:55.324Z,1516655335.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:55.503Z,1516655335.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:55.713Z,1516655335.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:56.127Z,1516655336.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:56.301Z,1516655336.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:56.528Z,1516655336.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:56.711Z,1516655336.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:08:56.946Z,1516655336.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:57.312Z,1516655337.312 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2018-01-22T21:08:57.347Z,1516655337.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:57.720Z,1516655337.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:58.112Z,1516655338.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:58.525Z,1516655338.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:58.926Z,1516655338.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:59.328Z,1516655339.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:08:59.728Z,1516655339.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:00.129Z,1516655340.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:00.513Z,1516655340.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:00.917Z,1516655340.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:01.317Z,1516655341.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:01.717Z,1516655341.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:02.129Z,1516655342.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:02.530Z,1516655342.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:02.922Z,1516655342.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:03.316Z,1516655343.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:03.721Z,1516655343.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:04.125Z,1516655344.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:04.513Z,1516655344.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:04.928Z,1516655344.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:05.334Z,1516655345.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:05.731Z,1516655345.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:06.110Z,1516655346.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:06.512Z,1516655346.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:06.940Z,1516655346.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:07.336Z,1516655347.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:07.737Z,1516655347.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:08.137Z,1516655348.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:08.516Z,1516655348.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:08.940Z,1516655348.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:09.320Z,1516655349.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:09.532Z,1516655349.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:09.742Z,1516655349.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:10.115Z,1516655350.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:10.328Z,1516655350.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:10.514Z,1516655350.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:10.739Z,1516655350.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:10.917Z,1516655350.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:11.314Z,1516655351.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:11.716Z,1516655351.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:12.108Z,1516655352.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:12.517Z,1516655352.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:12.916Z,1516655352.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:13.320Z,1516655353.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:13.727Z,1516655353.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:14.118Z,1516655354.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:14.516Z,1516655354.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:14.917Z,1516655354.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:15.328Z,1516655355.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:15.736Z,1516655355.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:16.119Z,1516655356.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:16.516Z,1516655356.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:16.924Z,1516655356.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:17.327Z,1516655357.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:17.719Z,1516655357.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:18.119Z,1516655358.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:18.507Z,1516655358.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:18.930Z,1516655358.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:19.321Z,1516655359.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:19.718Z,1516655359.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:20.117Z,1516655360.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:20.522Z,1516655360.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:20.925Z,1516655360.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:21.329Z,1516655361.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:21.714Z,1516655361.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:22.108Z,1516655362.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:22.508Z,1516655362.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:22.911Z,1516655362.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:23.315Z,1516655363.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:23.544Z,1516655363.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:23.722Z,1516655363.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:24.109Z,1516655364.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:24.341Z,1516655364.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:24.516Z,1516655364.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:24.755Z,1516655364.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:24.913Z,1516655364.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:25.315Z,1516655365.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:25.712Z,1516655365.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:26.117Z,1516655366.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:26.516Z,1516655366.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:26.917Z,1516655366.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:27.319Z,1516655367.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:27.718Z,1516655367.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:28.109Z,1516655368.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:28.505Z,1516655368.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:28.917Z,1516655368.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:29.321Z,1516655369.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:29.729Z,1516655369.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:32.980Z,1516655372.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:33.128Z,1516655373.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:33.490Z,1516655373.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:33.894Z,1516655373.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:34.294Z,1516655374.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:34.682Z,1516655374.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:35.083Z,1516655375.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:35.489Z,1516655375.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:35.879Z,1516655375.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:36.289Z,1516655376.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:36.699Z,1516655376.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:37.096Z,1516655377.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:37.484Z,1516655377.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:37.587Z,1516655377.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:37.892Z,1516655377.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:38.281Z,1516655378.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:38.383Z,1516655378.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:38.677Z,1516655378.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:38.795Z,1516655378.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:39.096Z,1516655379.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:39.500Z,1516655379.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:39.888Z,1516655379.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:40.284Z,1516655380.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:40.713Z,1516655380.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:41.081Z,1516655381.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:41.473Z,1516655381.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:41.876Z,1516655381.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:42.282Z,1516655382.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:42.704Z,1516655382.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:43.096Z,1516655383.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:43.480Z,1516655383.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:43.880Z,1516655383.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:44.288Z,1516655384.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:44.689Z,1516655384.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:45.083Z,1516655385.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:45.083Z,1516655385.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-01-22T21:09:45.083Z,1516655385.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:09:45.085Z,1516655385.085 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:45.085Z,1516655385.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-01-22T21:09:45.085Z,1516655385.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:09:45.087Z,1516655385.087 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:45.087Z,1516655385.087 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-01-22T21:09:45.087Z,1516655385.087 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:09:45.115Z,1516655385.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:09:45.115Z,1516655385.115 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:09:45.115Z,1516655385.115 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:09:45.540Z,1516655385.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:09:45.540Z,1516655385.540 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-01-22T21:09:45.540Z,1516655385.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:09:45.540Z,1516655385.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-01-22T21:09:45.541Z,1516655385.541 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:09:45.541Z,1516655385.541 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-01-22T21:09:45.888Z,1516655385.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:09:45.888Z,1516655385.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:09:45.889Z,1516655385.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:09:45.889Z,1516655385.889 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:09:45.890Z,1516655385.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:09:45.890Z,1516655385.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:09:45.890Z,1516655385.890 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:09:45.891Z,1516655385.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:09:45.891Z,1516655385.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:09:46.286Z,1516655386.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:46.688Z,1516655386.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:47.087Z,1516655387.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:47.479Z,1516655387.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:47.879Z,1516655387.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:48.296Z,1516655388.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:48.692Z,1516655388.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:49.089Z,1516655389.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:49.476Z,1516655389.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:49.876Z,1516655389.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:50.280Z,1516655390.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:50.695Z,1516655390.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:51.090Z,1516655391.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:51.495Z,1516655391.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:51.599Z,1516655391.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:51.900Z,1516655391.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:52.289Z,1516655392.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:52.396Z,1516655392.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:52.692Z,1516655392.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:52.811Z,1516655392.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:09:53.066Z,1516655393.066 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:09:53.066Z,1516655393.066 [BPC1] Communications Fault, FailCount= 2
2018-01-22T21:09:53.066Z,1516655393.066 [BPC1](ERROR): Communications Fault
2018-01-22T21:09:53.074Z,1516655393.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:53.107Z,1516655393.107 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:09:53.476Z,1516655393.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:53.874Z,1516655393.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:54.308Z,1516655394.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:54.321Z,1516655394.321 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:09:54.321Z,1516655394.321 [BPC1] No Fault, FailCount= 2
2018-01-22T21:09:54.742Z,1516655394.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:55.100Z,1516655395.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:55.480Z,1516655395.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:55.879Z,1516655395.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:56.306Z,1516655396.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:56.678Z,1516655396.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:57.086Z,1516655397.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:57.489Z,1516655397.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:57.881Z,1516655397.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:58.277Z,1516655398.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:58.684Z,1516655398.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:59.078Z,1516655399.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:59.479Z,1516655399.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:09:59.878Z,1516655399.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:00.283Z,1516655400.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:00.686Z,1516655400.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:01.088Z,1516655401.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:01.484Z,1516655401.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:01.881Z,1516655401.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:02.288Z,1516655402.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:02.675Z,1516655402.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:03.105Z,1516655403.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:03.493Z,1516655403.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:03.885Z,1516655403.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:04.279Z,1516655404.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:04.692Z,1516655404.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:05.082Z,1516655405.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:05.479Z,1516655405.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:05.611Z,1516655405.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:05.888Z,1516655405.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:06.289Z,1516655406.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:06.409Z,1516655406.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:06.694Z,1516655406.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:06.823Z,1516655406.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:07.096Z,1516655407.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:07.484Z,1516655407.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:07.619Z,1516655407.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:07.884Z,1516655407.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:08.287Z,1516655408.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:08.415Z,1516655408.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:08.684Z,1516655408.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:08.819Z,1516655408.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:09.088Z,1516655409.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:09.500Z,1516655409.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:09.911Z,1516655409.911 [BPC1](INFO): Initialized
2018-01-22T21:10:09.926Z,1516655409.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:10.286Z,1516655410.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:10.688Z,1516655410.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:11.082Z,1516655411.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:11.480Z,1516655411.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:11.879Z,1516655411.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:12.289Z,1516655412.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:12.700Z,1516655412.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:13.090Z,1516655413.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:13.489Z,1516655413.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:13.892Z,1516655413.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:14.279Z,1516655414.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:14.692Z,1516655414.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:15.089Z,1516655415.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:15.504Z,1516655415.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:15.892Z,1516655415.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:16.288Z,1516655416.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:16.688Z,1516655416.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:17.096Z,1516655417.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:17.488Z,1516655417.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:17.876Z,1516655417.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:18.304Z,1516655418.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:18.695Z,1516655418.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:19.099Z,1516655419.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:19.477Z,1516655419.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:19.649Z,1516655419.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:19.878Z,1516655419.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:20.285Z,1516655420.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:20.443Z,1516655420.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:20.693Z,1516655420.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:20.847Z,1516655420.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:21.088Z,1516655421.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:21.492Z,1516655421.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:21.888Z,1516655421.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:22.282Z,1516655422.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:22.677Z,1516655422.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:23.091Z,1516655423.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:23.486Z,1516655423.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:23.884Z,1516655423.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:24.289Z,1516655424.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:24.699Z,1516655424.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:25.094Z,1516655425.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:25.492Z,1516655425.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:25.885Z,1516655425.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:26.285Z,1516655426.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:26.688Z,1516655426.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:27.100Z,1516655427.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:27.495Z,1516655427.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:27.896Z,1516655427.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:28.290Z,1516655428.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:28.689Z,1516655428.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:29.092Z,1516655429.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:29.489Z,1516655429.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:29.893Z,1516655429.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:33.118Z,1516655433.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:33.268Z,1516655433.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:33.616Z,1516655433.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:33.673Z,1516655433.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:34.010Z,1516655434.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:34.461Z,1516655434.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:34.467Z,1516655434.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:34.819Z,1516655434.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:34.879Z,1516655434.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:35.228Z,1516655435.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:35.624Z,1516655435.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:36.016Z,1516655436.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:36.408Z,1516655436.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:36.799Z,1516655436.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:37.204Z,1516655437.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:37.604Z,1516655437.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:38.003Z,1516655438.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:38.432Z,1516655438.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:38.831Z,1516655438.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:39.200Z,1516655439.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:39.604Z,1516655439.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:40.010Z,1516655440.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:40.420Z,1516655440.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:40.813Z,1516655440.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:41.214Z,1516655441.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:41.599Z,1516655441.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:42.013Z,1516655442.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:42.424Z,1516655442.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:42.813Z,1516655442.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:43.203Z,1516655443.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:43.612Z,1516655443.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:44.003Z,1516655444.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:44.424Z,1516655444.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:44.817Z,1516655444.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:45.211Z,1516655445.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:45.608Z,1516655445.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:46.011Z,1516655446.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:46.404Z,1516655446.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:46.811Z,1516655446.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:47.217Z,1516655447.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:47.612Z,1516655447.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:47.699Z,1516655447.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:48.014Z,1516655448.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:48.415Z,1516655448.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:48.495Z,1516655448.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:48.792Z,1516655448.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:48.919Z,1516655448.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:10:49.216Z,1516655449.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:49.596Z,1516655449.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:49.996Z,1516655449.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:50.422Z,1516655450.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:50.824Z,1516655450.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:51.206Z,1516655451.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:51.604Z,1516655451.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:51.999Z,1516655451.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:52.407Z,1516655452.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:52.800Z,1516655452.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:53.226Z,1516655453.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:53.613Z,1516655453.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:54.014Z,1516655454.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:54.408Z,1516655454.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:54.802Z,1516655454.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:55.212Z,1516655455.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:55.603Z,1516655455.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:56.004Z,1516655456.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:56.411Z,1516655456.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:56.814Z,1516655456.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:57.216Z,1516655457.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:57.602Z,1516655457.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:58.019Z,1516655458.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:58.400Z,1516655458.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:58.800Z,1516655458.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:59.214Z,1516655459.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:10:59.620Z,1516655459.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:00.013Z,1516655460.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:00.413Z,1516655460.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:00.820Z,1516655460.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:01.220Z,1516655461.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:01.622Z,1516655461.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:01.723Z,1516655461.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:01.996Z,1516655461.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:02.421Z,1516655462.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:02.519Z,1516655462.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:02.832Z,1516655462.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:02.923Z,1516655462.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:03.217Z,1516655463.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:03.619Z,1516655463.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:03.719Z,1516655463.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:03.996Z,1516655463.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:04.408Z,1516655464.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:04.515Z,1516655464.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:04.811Z,1516655464.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:04.919Z,1516655464.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:05.220Z,1516655465.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:05.611Z,1516655465.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:06.045Z,1516655466.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:06.408Z,1516655466.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:06.811Z,1516655466.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:07.208Z,1516655467.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:07.615Z,1516655467.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:08.004Z,1516655468.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:08.416Z,1516655468.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:08.813Z,1516655468.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:09.220Z,1516655469.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:09.609Z,1516655469.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:10.008Z,1516655470.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:10.408Z,1516655470.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:10.807Z,1516655470.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:11.217Z,1516655471.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:11.622Z,1516655471.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:12.016Z,1516655472.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:12.420Z,1516655472.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:12.820Z,1516655472.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:13.197Z,1516655473.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:13.596Z,1516655473.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:14.012Z,1516655474.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:14.409Z,1516655474.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:14.825Z,1516655474.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:15.213Z,1516655475.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:15.603Z,1516655475.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:15.727Z,1516655475.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:16.012Z,1516655476.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:16.412Z,1516655476.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:16.525Z,1516655476.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:16.810Z,1516655476.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:16.931Z,1516655476.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:17.217Z,1516655477.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:17.613Z,1516655477.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:17.727Z,1516655477.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:18.022Z,1516655478.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:18.415Z,1516655478.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:18.523Z,1516655478.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:18.812Z,1516655478.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:18.927Z,1516655478.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:19.220Z,1516655479.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:19.622Z,1516655479.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:19.996Z,1516655479.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:20.422Z,1516655480.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:20.822Z,1516655480.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:21.210Z,1516655481.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:21.604Z,1516655481.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:22.004Z,1516655482.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:22.397Z,1516655482.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:22.808Z,1516655482.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:23.210Z,1516655483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:23.610Z,1516655483.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:24.006Z,1516655484.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:24.412Z,1516655484.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:24.801Z,1516655484.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:25.202Z,1516655485.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:25.599Z,1516655485.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:26.002Z,1516655486.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:26.418Z,1516655486.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:26.810Z,1516655486.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:27.216Z,1516655487.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:27.603Z,1516655487.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:28.008Z,1516655488.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:28.402Z,1516655488.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:28.809Z,1516655488.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:28.813Z,1516655488.813 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T21:06:28.5Z
2018-01-22T21:11:28.813Z,1516655488.813 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:11:28.813Z,1516655488.813 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T21:11:29.213Z,1516655489.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:29.716Z,1516655489.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:29.743Z,1516655489.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:30.016Z,1516655490.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:30.541Z,1516655490.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:30.967Z,1516655490.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:31.763Z,1516655491.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:32.559Z,1516655492.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:32.963Z,1516655492.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:11:33.310Z,1516655493.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:33.388Z,1516655493.388 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20180122T180533/Courier0068.lzma
2018-01-22T21:11:33.453Z,1516655493.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:33.798Z,1516655493.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:34.140Z,1516655494.140 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0068.lzma.bak
2018-01-22T21:11:34.141Z,1516655494.141 [DataOverHttps](INFO): SBD MOMSN=7751801
2018-01-22T21:11:34.269Z,1516655494.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:34.813Z,1516655494.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:34.992Z,1516655494.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:38.315Z,1516655498.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:38.423Z,1516655498.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:38.815Z,1516655498.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:39.213Z,1516655499.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:39.616Z,1516655499.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:39.991Z,1516655499.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:43.283Z,1516655503.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:43.367Z,1516655503.367 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0069.lzma
2018-01-22T21:11:43.416Z,1516655503.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:43.778Z,1516655503.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:44.125Z,1516655504.125 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0069.lzma.bak
2018-01-22T21:11:44.125Z,1516655504.125 [DataOverHttps](INFO): SBD MOMSN=7751803
2018-01-22T21:11:44.192Z,1516655504.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:44.950Z,1516655504.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:44.953Z,1516655504.953 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T21:11:44.953Z,1516655504.953 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T21:11:44.953Z,1516655504.953 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T21:11:45.076Z,1516655505.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:48.939Z,1516655508.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:49.100Z,1516655509.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:49.468Z,1516655509.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:49.873Z,1516655509.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:50.276Z,1516655510.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:50.656Z,1516655510.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:51.083Z,1516655511.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:51.448Z,1516655511.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:51.839Z,1516655511.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:52.333Z,1516655512.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:52.685Z,1516655512.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:53.055Z,1516655513.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:53.457Z,1516655513.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:53.846Z,1516655513.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:54.300Z,1516655514.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:54.670Z,1516655514.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:55.037Z,1516655515.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:55.466Z,1516655515.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:55.864Z,1516655515.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:56.271Z,1516655516.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:56.645Z,1516655516.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:57.081Z,1516655517.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:57.447Z,1516655517.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:57.850Z,1516655517.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:58.265Z,1516655518.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:58.660Z,1516655518.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:59.073Z,1516655519.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:59.473Z,1516655519.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:11:59.862Z,1516655519.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:00.317Z,1516655520.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:00.660Z,1516655520.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:01.044Z,1516655521.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:01.468Z,1516655521.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:01.871Z,1516655521.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:02.295Z,1516655522.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:02.637Z,1516655522.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:03.048Z,1516655523.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:03.438Z,1516655523.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:03.838Z,1516655523.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:04.297Z,1516655524.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:04.646Z,1516655524.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:05.048Z,1516655525.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:05.448Z,1516655525.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:05.842Z,1516655525.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:06.281Z,1516655526.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:06.654Z,1516655526.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:07.039Z,1516655527.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:07.455Z,1516655527.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:07.849Z,1516655527.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:08.310Z,1516655528.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:08.652Z,1516655528.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:09.048Z,1516655529.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:09.446Z,1516655529.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:09.850Z,1516655529.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:10.260Z,1516655530.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:10.665Z,1516655530.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:11.054Z,1516655531.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:11.457Z,1516655531.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:11.852Z,1516655531.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:12.244Z,1516655532.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:12.668Z,1516655532.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:13.032Z,1516655533.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:13.459Z,1516655533.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:13.865Z,1516655533.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:14.315Z,1516655534.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:14.636Z,1516655534.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:15.034Z,1516655535.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:15.495Z,1516655535.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:15.837Z,1516655535.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:16.313Z,1516655536.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:16.658Z,1516655536.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:17.045Z,1516655537.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:17.434Z,1516655537.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:17.839Z,1516655537.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:18.291Z,1516655538.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:18.640Z,1516655538.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:19.046Z,1516655539.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:19.444Z,1516655539.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:19.846Z,1516655539.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:20.318Z,1516655540.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:20.636Z,1516655540.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:21.065Z,1516655541.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:21.436Z,1516655541.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:21.835Z,1516655541.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:22.292Z,1516655542.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:22.654Z,1516655542.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:23.041Z,1516655543.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:23.438Z,1516655543.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:23.838Z,1516655543.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:24.240Z,1516655544.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:24.684Z,1516655544.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:25.037Z,1516655545.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:25.448Z,1516655545.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:25.845Z,1516655545.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:26.248Z,1516655546.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:26.681Z,1516655546.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:27.048Z,1516655547.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:27.446Z,1516655547.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:27.838Z,1516655547.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:28.321Z,1516655548.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:28.656Z,1516655548.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:29.047Z,1516655549.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:29.441Z,1516655549.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:29.847Z,1516655549.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:30.303Z,1516655550.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:30.648Z,1516655550.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:31.031Z,1516655551.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:31.460Z,1516655551.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:31.860Z,1516655551.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:32.316Z,1516655552.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:32.635Z,1516655552.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:33.044Z,1516655553.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:33.444Z,1516655553.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:33.838Z,1516655553.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:34.204Z,1516655554.204 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T21:12:34.204Z,1516655554.204 [NAL9602] Data Fault, FailCount= 2
2018-01-22T21:12:34.204Z,1516655554.204 [NAL9602](ERROR): Data Fault
2018-01-22T21:12:34.303Z,1516655554.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:34.341Z,1516655554.341 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T21:12:34.600Z,1516655554.600 [NAL9602](INFO): Powering down
2018-01-22T21:12:34.642Z,1516655554.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:35.040Z,1516655555.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:35.449Z,1516655555.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:35.462Z,1516655555.462 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T21:12:35.462Z,1516655555.462 [NAL9602] No Fault, FailCount= 2
2018-01-22T21:12:35.838Z,1516655555.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:36.247Z,1516655556.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:36.648Z,1516655556.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:37.044Z,1516655557.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:37.444Z,1516655557.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:37.841Z,1516655557.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:38.244Z,1516655558.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:38.686Z,1516655558.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:39.051Z,1516655559.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:39.449Z,1516655559.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:39.852Z,1516655559.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:40.251Z,1516655560.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:40.698Z,1516655560.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:41.039Z,1516655561.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:41.435Z,1516655561.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:41.835Z,1516655561.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:42.236Z,1516655562.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:42.647Z,1516655562.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:43.044Z,1516655563.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:43.438Z,1516655563.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:43.847Z,1516655563.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:44.237Z,1516655564.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:44.640Z,1516655564.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:45.048Z,1516655565.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:45.442Z,1516655565.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:48.793Z,1516655568.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:48.793Z,1516655568.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-01-22T21:12:48.793Z,1516655568.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:12:48.795Z,1516655568.795 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:48.795Z,1516655568.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-01-22T21:12:48.796Z,1516655568.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:12:48.797Z,1516655568.797 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:48.798Z,1516655568.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-01-22T21:12:48.798Z,1516655568.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:12:48.810Z,1516655568.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:12:48.810Z,1516655568.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:12:48.810Z,1516655568.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:12:48.952Z,1516655568.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:12:48.952Z,1516655568.952 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-01-22T21:12:48.953Z,1516655568.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:12:48.953Z,1516655568.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-01-22T21:12:48.953Z,1516655568.953 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:12:48.953Z,1516655568.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-01-22T21:12:49.286Z,1516655569.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:12:49.287Z,1516655569.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:12:49.287Z,1516655569.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:12:49.287Z,1516655569.287 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:12:49.288Z,1516655569.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:12:49.288Z,1516655569.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:12:49.288Z,1516655569.288 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:12:49.289Z,1516655569.289 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:12:49.289Z,1516655569.289 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:12:49.680Z,1516655569.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:50.076Z,1516655570.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:50.468Z,1516655570.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:50.885Z,1516655570.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:51.268Z,1516655571.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:51.676Z,1516655571.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:52.073Z,1516655572.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:52.469Z,1516655572.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:52.870Z,1516655572.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:53.280Z,1516655573.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:53.669Z,1516655573.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:54.072Z,1516655574.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:54.477Z,1516655574.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:54.853Z,1516655574.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:55.273Z,1516655575.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:55.660Z,1516655575.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:56.064Z,1516655576.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:56.487Z,1516655576.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:56.868Z,1516655576.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:57.261Z,1516655577.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:57.661Z,1516655577.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:58.073Z,1516655578.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:58.467Z,1516655578.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:58.869Z,1516655578.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:59.263Z,1516655579.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:12:59.679Z,1516655579.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:00.068Z,1516655580.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:00.471Z,1516655580.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:00.868Z,1516655580.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:01.264Z,1516655581.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:01.680Z,1516655581.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:02.062Z,1516655582.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:02.463Z,1516655582.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:02.880Z,1516655582.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:03.277Z,1516655583.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:03.673Z,1516655583.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:04.075Z,1516655584.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:04.476Z,1516655584.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:04.824Z,1516655584.824 [NAL9602](INFO): Powering up NAL9602
2018-01-22T21:13:04.884Z,1516655584.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:05.281Z,1516655585.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:05.680Z,1516655585.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:06.082Z,1516655586.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:06.460Z,1516655586.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:06.872Z,1516655586.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:07.256Z,1516655587.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:07.664Z,1516655587.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:08.060Z,1516655588.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:08.464Z,1516655588.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:08.868Z,1516655588.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:09.273Z,1516655589.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:09.661Z,1516655589.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:10.080Z,1516655590.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:10.479Z,1516655590.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:10.868Z,1516655590.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:11.283Z,1516655591.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:11.672Z,1516655591.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:12.075Z,1516655592.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:12.476Z,1516655592.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:12.877Z,1516655592.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:13.274Z,1516655593.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:13.674Z,1516655593.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:14.073Z,1516655594.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:14.472Z,1516655594.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:14.875Z,1516655594.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:15.273Z,1516655595.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:15.682Z,1516655595.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:16.024Z,1516655596.024 [NAL9602](INFO): NAL9602 initialized
2018-01-22T21:13:16.078Z,1516655596.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:16.473Z,1516655596.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:16.873Z,1516655596.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:17.276Z,1516655597.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:17.684Z,1516655597.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:18.073Z,1516655598.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:18.473Z,1516655598.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:18.880Z,1516655598.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:19.264Z,1516655599.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:19.688Z,1516655599.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:20.088Z,1516655600.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:20.489Z,1516655600.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:20.867Z,1516655600.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:21.259Z,1516655601.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:21.668Z,1516655601.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:22.061Z,1516655602.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:22.466Z,1516655602.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:22.870Z,1516655602.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:23.266Z,1516655603.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:23.662Z,1516655603.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:24.062Z,1516655604.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:24.466Z,1516655604.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:24.863Z,1516655604.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:25.263Z,1516655605.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:25.673Z,1516655605.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:26.076Z,1516655606.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:26.472Z,1516655606.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:26.874Z,1516655606.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:27.272Z,1516655607.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:27.664Z,1516655607.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:28.065Z,1516655608.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:28.480Z,1516655608.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:28.874Z,1516655608.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:29.275Z,1516655609.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:29.672Z,1516655609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:30.061Z,1516655610.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:30.468Z,1516655610.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:30.876Z,1516655610.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:31.263Z,1516655611.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:31.675Z,1516655611.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:32.077Z,1516655612.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:32.487Z,1516655612.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:32.868Z,1516655612.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:33.269Z,1516655613.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:33.669Z,1516655613.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:34.072Z,1516655614.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:34.480Z,1516655614.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:34.877Z,1516655614.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:35.284Z,1516655615.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:35.674Z,1516655615.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:36.067Z,1516655616.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:36.480Z,1516655616.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:36.886Z,1516655616.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:37.260Z,1516655617.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:37.683Z,1516655617.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:38.070Z,1516655618.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:38.474Z,1516655618.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:38.863Z,1516655618.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:39.267Z,1516655619.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:39.668Z,1516655619.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:40.060Z,1516655620.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:40.466Z,1516655620.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:40.874Z,1516655620.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:41.276Z,1516655621.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:41.660Z,1516655621.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:42.064Z,1516655622.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:42.460Z,1516655622.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:42.859Z,1516655622.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:43.263Z,1516655623.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:43.678Z,1516655623.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:44.088Z,1516655624.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:44.489Z,1516655624.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:44.868Z,1516655624.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:45.263Z,1516655625.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:45.675Z,1516655625.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:49.024Z,1516655629.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:49.177Z,1516655629.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:49.528Z,1516655629.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:49.924Z,1516655629.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:50.318Z,1516655630.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:50.787Z,1516655630.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:51.122Z,1516655631.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:51.540Z,1516655631.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:51.930Z,1516655631.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:52.329Z,1516655632.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:52.727Z,1516655632.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:53.112Z,1516655633.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:53.512Z,1516655633.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:53.916Z,1516655633.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:54.316Z,1516655634.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:54.728Z,1516655634.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:55.128Z,1516655635.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:55.533Z,1516655635.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:55.918Z,1516655635.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:56.315Z,1516655636.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:56.721Z,1516655636.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:57.124Z,1516655637.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:57.535Z,1516655637.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:57.930Z,1516655637.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:58.337Z,1516655638.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:58.721Z,1516655638.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:59.138Z,1516655639.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:59.524Z,1516655639.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:13:59.921Z,1516655639.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:00.324Z,1516655640.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:00.728Z,1516655640.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:01.144Z,1516655641.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:01.527Z,1516655641.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:01.928Z,1516655641.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:02.324Z,1516655642.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:02.785Z,1516655642.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:03.116Z,1516655643.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:03.543Z,1516655643.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:03.922Z,1516655643.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:04.319Z,1516655644.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:04.713Z,1516655644.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:05.114Z,1516655645.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:05.518Z,1516655645.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:05.925Z,1516655645.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:06.313Z,1516655646.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:06.729Z,1516655646.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:07.132Z,1516655647.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:07.534Z,1516655647.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:07.932Z,1516655647.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:08.312Z,1516655648.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:08.736Z,1516655648.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:09.112Z,1516655649.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:09.522Z,1516655649.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:09.945Z,1516655649.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:10.343Z,1516655650.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:10.720Z,1516655650.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:11.120Z,1516655651.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:11.525Z,1516655651.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:11.917Z,1516655651.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:12.320Z,1516655652.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:12.726Z,1516655652.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:13.128Z,1516655653.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:13.535Z,1516655653.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:13.908Z,1516655653.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:14.317Z,1516655654.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:14.721Z,1516655654.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:15.116Z,1516655655.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:15.543Z,1516655655.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:15.923Z,1516655655.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:16.324Z,1516655656.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:16.715Z,1516655656.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:17.128Z,1516655657.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:17.517Z,1516655657.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:17.918Z,1516655657.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:18.320Z,1516655658.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:18.725Z,1516655658.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:19.148Z,1516655659.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:19.527Z,1516655659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:19.932Z,1516655659.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:20.307Z,1516655660.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:20.708Z,1516655660.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:21.108Z,1516655661.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:21.538Z,1516655661.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:21.922Z,1516655661.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:22.322Z,1516655662.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:22.714Z,1516655662.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:23.120Z,1516655663.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:23.514Z,1516655663.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:23.922Z,1516655663.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:24.314Z,1516655664.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:24.720Z,1516655664.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:25.123Z,1516655665.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:25.520Z,1516655665.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:25.914Z,1516655665.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:26.314Z,1516655666.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:26.720Z,1516655666.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:27.119Z,1516655667.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:27.520Z,1516655667.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:27.922Z,1516655667.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:28.320Z,1516655668.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:28.713Z,1516655668.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:29.120Z,1516655669.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:29.514Z,1516655669.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:29.918Z,1516655669.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:30.317Z,1516655670.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:30.726Z,1516655670.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:31.136Z,1516655671.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:31.525Z,1516655671.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:31.924Z,1516655671.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:32.315Z,1516655672.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:32.716Z,1516655672.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:33.119Z,1516655673.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:33.527Z,1516655673.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:33.936Z,1516655673.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:34.329Z,1516655674.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:34.731Z,1516655674.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:35.125Z,1516655675.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:35.512Z,1516655675.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:35.912Z,1516655675.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:36.312Z,1516655676.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:36.718Z,1516655676.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:37.134Z,1516655677.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:37.522Z,1516655677.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:37.916Z,1516655677.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:38.316Z,1516655678.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:38.720Z,1516655678.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:39.116Z,1516655679.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:39.522Z,1516655679.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:39.926Z,1516655679.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:40.327Z,1516655680.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:40.716Z,1516655680.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:41.125Z,1516655681.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:41.518Z,1516655681.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:41.923Z,1516655681.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:42.320Z,1516655682.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:42.727Z,1516655682.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:43.139Z,1516655683.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:43.525Z,1516655683.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:43.925Z,1516655683.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:44.315Z,1516655684.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:44.715Z,1516655684.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:45.132Z,1516655685.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:45.531Z,1516655685.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:45.939Z,1516655685.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:49.285Z,1516655689.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:49.427Z,1516655689.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:49.750Z,1516655689.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:50.153Z,1516655690.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:50.564Z,1516655690.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:50.956Z,1516655690.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:51.356Z,1516655691.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:51.764Z,1516655691.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:52.164Z,1516655692.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:52.564Z,1516655692.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:52.951Z,1516655692.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:53.351Z,1516655693.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:53.762Z,1516655693.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:54.151Z,1516655694.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:54.572Z,1516655694.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:54.965Z,1516655694.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:55.361Z,1516655695.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:55.751Z,1516655695.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:56.160Z,1516655696.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:56.608Z,1516655696.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:56.951Z,1516655696.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:57.359Z,1516655697.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:57.761Z,1516655697.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:58.164Z,1516655698.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:58.561Z,1516655698.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:58.951Z,1516655698.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:59.351Z,1516655699.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:14:59.760Z,1516655699.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:00.157Z,1516655700.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:00.563Z,1516655700.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:00.973Z,1516655700.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:01.362Z,1516655701.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:01.759Z,1516655701.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:02.163Z,1516655702.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:02.581Z,1516655702.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:02.952Z,1516655702.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:03.360Z,1516655703.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:03.770Z,1516655703.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:04.170Z,1516655704.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:04.588Z,1516655704.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:04.957Z,1516655704.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:05.360Z,1516655705.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:05.752Z,1516655705.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:06.156Z,1516655706.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:06.593Z,1516655706.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:06.972Z,1516655706.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:07.360Z,1516655707.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:07.760Z,1516655707.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:08.156Z,1516655708.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:08.600Z,1516655708.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:08.951Z,1516655708.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:09.360Z,1516655709.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:09.761Z,1516655709.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:10.157Z,1516655710.157 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:15:10.157Z,1516655710.157 [BPC1] Communications Fault, FailCount= 3
2018-01-22T21:15:10.157Z,1516655710.157 [BPC1](ERROR): Communications Fault
2018-01-22T21:15:10.164Z,1516655710.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:10.178Z,1516655710.178 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:15:10.618Z,1516655710.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:10.960Z,1516655710.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:11.369Z,1516655711.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:11.383Z,1516655711.383 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:15:11.383Z,1516655711.383 [BPC1] No Fault, FailCount= 3
2018-01-22T21:15:11.810Z,1516655711.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:12.168Z,1516655712.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:12.554Z,1516655712.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:12.979Z,1516655712.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:13.354Z,1516655713.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:13.752Z,1516655713.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:14.149Z,1516655714.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:14.552Z,1516655714.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:14.972Z,1516655714.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:15.356Z,1516655715.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:15.780Z,1516655715.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:16.164Z,1516655716.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:16.605Z,1516655716.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:16.962Z,1516655716.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:17.350Z,1516655717.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:17.762Z,1516655717.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:18.157Z,1516655718.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:18.605Z,1516655718.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:18.968Z,1516655718.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:19.361Z,1516655719.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:19.750Z,1516655719.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:20.156Z,1516655720.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:20.607Z,1516655720.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:20.964Z,1516655720.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:21.360Z,1516655721.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:21.768Z,1516655721.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:22.166Z,1516655722.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:22.611Z,1516655722.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:22.957Z,1516655722.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:23.357Z,1516655723.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:23.758Z,1516655723.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:24.157Z,1516655724.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:24.628Z,1516655724.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:24.972Z,1516655724.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:25.370Z,1516655725.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:25.748Z,1516655725.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:26.148Z,1516655726.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:26.552Z,1516655726.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:26.979Z,1516655726.979 [BPC1](INFO): Initialized
2018-01-22T21:15:26.992Z,1516655726.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:27.356Z,1516655727.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:27.760Z,1516655727.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:28.158Z,1516655728.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:28.558Z,1516655728.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:28.965Z,1516655728.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:29.349Z,1516655729.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:29.763Z,1516655729.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:30.152Z,1516655730.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:30.614Z,1516655730.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:30.983Z,1516655730.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:31.365Z,1516655731.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:31.747Z,1516655731.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:32.150Z,1516655732.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:32.615Z,1516655732.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:32.950Z,1516655732.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:33.349Z,1516655733.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:33.775Z,1516655733.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:34.176Z,1516655734.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:34.631Z,1516655734.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:34.949Z,1516655734.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:35.351Z,1516655735.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:35.752Z,1516655735.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:36.148Z,1516655736.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:36.635Z,1516655736.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:36.987Z,1516655736.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:37.352Z,1516655737.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:37.752Z,1516655737.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:38.148Z,1516655738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:38.551Z,1516655738.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:38.976Z,1516655738.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:39.368Z,1516655739.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:39.768Z,1516655739.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:40.166Z,1516655740.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:40.561Z,1516655740.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:40.973Z,1516655740.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:41.352Z,1516655741.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:41.764Z,1516655741.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:42.157Z,1516655742.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:42.562Z,1516655742.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:42.981Z,1516655742.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:43.368Z,1516655743.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:43.758Z,1516655743.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:44.157Z,1516655744.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:44.630Z,1516655744.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:44.958Z,1516655744.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:45.354Z,1516655745.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:45.748Z,1516655745.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:46.156Z,1516655746.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:49.462Z,1516655749.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:49.462Z,1516655749.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-01-22T21:15:49.462Z,1516655749.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:15:49.464Z,1516655749.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:49.464Z,1516655749.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-01-22T21:15:49.464Z,1516655749.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:15:49.466Z,1516655749.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:49.466Z,1516655749.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-01-22T21:15:49.494Z,1516655749.494 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:15:49.517Z,1516655749.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:15:49.517Z,1516655749.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:15:49.517Z,1516655749.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:15:49.518Z,1516655749.518 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T21:15:49.634Z,1516655749.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:15:49.639Z,1516655749.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-01-22T21:15:49.639Z,1516655749.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:15:49.639Z,1516655749.639 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-01-22T21:15:49.640Z,1516655749.640 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:15:49.640Z,1516655749.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-01-22T21:15:49.996Z,1516655749.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:15:49.999Z,1516655749.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:15:49.000Z,1516655750.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:15:49.000Z,1516655750.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:15:50.000Z,1516655750.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:15:50.001Z,1516655750.001 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:15:50.001Z,1516655750.001 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:15:50.001Z,1516655750.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:15:50.002Z,1516655750.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:15:50.407Z,1516655750.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:50.798Z,1516655750.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:51.176Z,1516655751.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:51.584Z,1516655751.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:51.997Z,1516655751.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:52.395Z,1516655752.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:52.784Z,1516655752.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:53.180Z,1516655753.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:53.592Z,1516655753.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:53.981Z,1516655753.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:54.384Z,1516655754.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:54.791Z,1516655754.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:55.196Z,1516655755.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:55.585Z,1516655755.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:55.984Z,1516655755.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:56.390Z,1516655756.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:56.786Z,1516655756.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:57.185Z,1516655757.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:57.591Z,1516655757.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:57.990Z,1516655757.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:58.394Z,1516655758.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:58.794Z,1516655758.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:59.191Z,1516655759.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:59.590Z,1516655759.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:15:59.997Z,1516655759.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:00.389Z,1516655760.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:00.769Z,1516655760.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:01.172Z,1516655761.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:01.600Z,1516655761.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:01.997Z,1516655761.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:02.399Z,1516655762.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:02.792Z,1516655762.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:03.188Z,1516655763.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:03.598Z,1516655763.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:03.994Z,1516655763.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:04.391Z,1516655764.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:04.788Z,1516655764.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:05.188Z,1516655765.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:05.588Z,1516655765.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:05.987Z,1516655765.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:06.408Z,1516655766.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:06.781Z,1516655766.781 [PNI_TCM](ERROR): CRC does not match. Expected:0x5205 got:0x63232
2018-01-22T21:16:06.808Z,1516655766.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:07.197Z,1516655767.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:07.589Z,1516655767.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:07.996Z,1516655767.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:08.399Z,1516655768.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:08.788Z,1516655768.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:09.188Z,1516655769.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:09.608Z,1516655769.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:09.985Z,1516655769.985 [PNI_TCM](ERROR): CRC does not match. Expected:0x54553 got:0x59420
2018-01-22T21:16:10.024Z,1516655770.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:10.392Z,1516655770.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:10.783Z,1516655770.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:11.200Z,1516655771.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:11.594Z,1516655771.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:12.014Z,1516655772.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:12.396Z,1516655772.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:12.796Z,1516655772.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:13.201Z,1516655773.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:13.601Z,1516655773.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:13.985Z,1516655773.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:14.405Z,1516655774.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:14.787Z,1516655774.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:15.188Z,1516655775.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:15.586Z,1516655775.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:16.008Z,1516655776.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:16.392Z,1516655776.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:16.788Z,1516655776.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:17.184Z,1516655777.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:17.609Z,1516655777.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:17.994Z,1516655777.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:18.394Z,1516655778.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:18.783Z,1516655778.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:19.188Z,1516655779.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:19.592Z,1516655779.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:19.996Z,1516655779.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:20.393Z,1516655780.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:20.802Z,1516655780.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:21.180Z,1516655781.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:21.597Z,1516655781.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:21.993Z,1516655781.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:22.396Z,1516655782.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:22.778Z,1516655782.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:23.175Z,1516655783.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:23.593Z,1516655783.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:24.020Z,1516655784.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:24.384Z,1516655784.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:24.780Z,1516655784.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:25.185Z,1516655785.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:25.581Z,1516655785.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:25.993Z,1516655785.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:26.386Z,1516655786.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:26.786Z,1516655786.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:27.180Z,1516655787.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:27.586Z,1516655787.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:27.994Z,1516655787.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:28.396Z,1516655788.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:28.792Z,1516655788.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:29.172Z,1516655789.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:29.578Z,1516655789.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:30.019Z,1516655790.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:30.378Z,1516655790.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:30.780Z,1516655790.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:31.174Z,1516655791.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:31.576Z,1516655791.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:31.981Z,1516655791.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:32.384Z,1516655792.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:32.774Z,1516655792.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:33.186Z,1516655793.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:33.588Z,1516655793.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:33.988Z,1516655793.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:34.384Z,1516655794.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:34.775Z,1516655794.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:35.174Z,1516655795.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:35.585Z,1516655795.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:35.989Z,1516655795.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:36.382Z,1516655796.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:36.776Z,1516655796.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:37.179Z,1516655797.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:37.578Z,1516655797.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:37.986Z,1516655797.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:38.389Z,1516655798.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:38.782Z,1516655798.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:39.187Z,1516655799.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:39.584Z,1516655799.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:39.982Z,1516655799.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:40.376Z,1516655800.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:40.786Z,1516655800.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:41.191Z,1516655801.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:41.585Z,1516655801.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:41.988Z,1516655801.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:42.372Z,1516655802.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:42.772Z,1516655802.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:43.192Z,1516655803.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:43.569Z,1516655803.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:43.982Z,1516655803.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:44.386Z,1516655804.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:44.778Z,1516655804.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:45.176Z,1516655805.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:45.183Z,1516655805.183 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T21:16:45.184Z,1516655805.184 [Default:CheckIn:C.Wait] Stopped
2018-01-22T21:16:45.184Z,1516655805.184 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T21:16:45.184Z,1516655805.184 [Default:CheckIn:D] Running Loop=1
2018-01-22T21:16:45.593Z,1516655805.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:45.596Z,1516655805.596 [Default:CheckIn:D] Stopped
2018-01-22T21:16:45.596Z,1516655805.596 [Default:CheckIn:E] Running Loop=1
2018-01-22T21:16:45.979Z,1516655805.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:45.987Z,1516655805.987 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.348470 min 
2018-01-22T21:16:45.987Z,1516655805.987 [Default:CheckIn:E] Stopped
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn] Stopped
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn](INFO): Running loop #18
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn] Running Loop=18
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T21:16:45.988Z,1516655805.988 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T21:16:46.380Z,1516655806.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:51.931Z,1516655811.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:52.077Z,1516655812.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:52.456Z,1516655812.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:52.816Z,1516655812.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:53.204Z,1516655813.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:53.629Z,1516655813.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:54.056Z,1516655814.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:54.428Z,1516655814.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:54.821Z,1516655814.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:55.220Z,1516655815.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:55.589Z,1516655815.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:56.020Z,1516655816.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:56.398Z,1516655816.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:56.828Z,1516655816.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:57.233Z,1516655817.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:57.639Z,1516655817.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:58.005Z,1516655818.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:58.403Z,1516655818.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:58.808Z,1516655818.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:59.205Z,1516655819.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:16:59.605Z,1516655819.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:00.012Z,1516655820.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:00.414Z,1516655820.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:00.812Z,1516655820.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:01.207Z,1516655821.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:01.583Z,1516655821.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:01.988Z,1516655821.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:02.388Z,1516655822.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:02.814Z,1516655822.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:03.224Z,1516655823.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:03.615Z,1516655823.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:03.988Z,1516655823.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:04.388Z,1516655824.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:04.787Z,1516655824.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:05.188Z,1516655825.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:05.596Z,1516655825.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:06.026Z,1516655826.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:06.417Z,1516655826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:06.812Z,1516655826.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:07.217Z,1516655827.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:07.592Z,1516655827.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:07.992Z,1516655827.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:08.396Z,1516655828.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:08.798Z,1516655828.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:09.212Z,1516655829.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:09.614Z,1516655829.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:09.996Z,1516655829.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:10.392Z,1516655830.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:10.791Z,1516655830.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:11.192Z,1516655831.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:11.592Z,1516655831.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:12.022Z,1516655832.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:12.402Z,1516655832.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:12.804Z,1516655832.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:13.200Z,1516655833.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:13.595Z,1516655833.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:14.003Z,1516655834.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:14.400Z,1516655834.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:14.804Z,1516655834.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:15.205Z,1516655835.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:15.600Z,1516655835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:15.996Z,1516655835.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:16.402Z,1516655836.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:16.844Z,1516655836.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:17.204Z,1516655837.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:17.596Z,1516655837.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:18.012Z,1516655838.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:18.406Z,1516655838.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:18.808Z,1516655838.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:19.204Z,1516655839.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:19.598Z,1516655839.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:20.005Z,1516655840.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:20.396Z,1516655840.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:20.812Z,1516655840.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:21.216Z,1516655841.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:21.606Z,1516655841.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:22.004Z,1516655842.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:22.393Z,1516655842.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:22.795Z,1516655842.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:23.196Z,1516655843.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:23.604Z,1516655843.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:24.006Z,1516655844.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:24.409Z,1516655844.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:24.812Z,1516655844.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:25.204Z,1516655845.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:25.595Z,1516655845.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:25.996Z,1516655845.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:26.409Z,1516655846.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:26.805Z,1516655846.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:27.218Z,1516655847.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:27.610Z,1516655847.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:27.995Z,1516655847.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:28.400Z,1516655848.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:28.816Z,1516655848.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:29.216Z,1516655849.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:29.588Z,1516655849.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:30.012Z,1516655850.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:30.402Z,1516655850.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:30.844Z,1516655850.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:31.247Z,1516655851.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:31.596Z,1516655851.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:31.992Z,1516655851.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:32.396Z,1516655852.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:32.803Z,1516655852.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:33.211Z,1516655853.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:33.603Z,1516655853.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:33.992Z,1516655853.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:34.387Z,1516655854.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:34.796Z,1516655854.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:35.189Z,1516655855.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:35.592Z,1516655855.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:36.005Z,1516655856.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:36.408Z,1516655856.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:36.816Z,1516655856.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:37.201Z,1516655857.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:37.605Z,1516655857.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:37.996Z,1516655857.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:38.406Z,1516655858.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:38.822Z,1516655858.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:39.212Z,1516655859.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:39.610Z,1516655859.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:39.995Z,1516655859.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:40.400Z,1516655860.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:40.847Z,1516655860.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:41.196Z,1516655861.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:41.605Z,1516655861.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:42.013Z,1516655862.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:42.408Z,1516655862.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:42.818Z,1516655862.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:43.207Z,1516655863.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:43.599Z,1516655863.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:43.988Z,1516655863.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:44.392Z,1516655864.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:44.845Z,1516655864.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:45.222Z,1516655865.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:45.599Z,1516655865.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:45.999Z,1516655865.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:46.397Z,1516655866.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:49.749Z,1516655869.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:49.884Z,1516655869.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:50.254Z,1516655870.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:50.648Z,1516655870.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:51.040Z,1516655871.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:51.436Z,1516655871.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:51.844Z,1516655871.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:52.241Z,1516655872.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:52.640Z,1516655872.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:53.044Z,1516655873.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:53.456Z,1516655873.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:53.851Z,1516655873.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:54.229Z,1516655874.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:54.625Z,1516655874.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:55.052Z,1516655875.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:55.429Z,1516655875.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:55.851Z,1516655875.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:56.260Z,1516655876.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:56.637Z,1516655876.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:57.036Z,1516655877.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:57.429Z,1516655877.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:57.835Z,1516655877.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:58.232Z,1516655878.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:58.630Z,1516655878.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:59.072Z,1516655879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:59.439Z,1516655879.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:17:59.848Z,1516655879.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:00.236Z,1516655880.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:00.630Z,1516655880.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:01.041Z,1516655881.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:01.444Z,1516655881.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:01.848Z,1516655881.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:02.244Z,1516655882.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:02.646Z,1516655882.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:03.031Z,1516655883.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:03.439Z,1516655883.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:03.843Z,1516655883.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:04.241Z,1516655884.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:04.632Z,1516655884.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:05.052Z,1516655885.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:05.445Z,1516655885.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:05.842Z,1516655885.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:06.244Z,1516655886.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:06.623Z,1516655886.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:07.028Z,1516655887.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:07.428Z,1516655887.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:07.838Z,1516655887.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:08.237Z,1516655888.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:08.638Z,1516655888.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:09.040Z,1516655889.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:09.429Z,1516655889.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:09.835Z,1516655889.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:10.240Z,1516655890.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:10.628Z,1516655890.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:11.068Z,1516655891.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:11.439Z,1516655891.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:11.848Z,1516655891.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:12.234Z,1516655892.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:12.630Z,1516655892.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:13.033Z,1516655893.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:13.443Z,1516655893.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:13.840Z,1516655893.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:14.244Z,1516655894.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:14.654Z,1516655894.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:15.037Z,1516655895.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:15.436Z,1516655895.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:15.844Z,1516655895.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:16.236Z,1516655896.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:16.640Z,1516655896.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:17.045Z,1516655897.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:17.456Z,1516655897.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:17.843Z,1516655897.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:18.240Z,1516655898.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:18.641Z,1516655898.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:19.048Z,1516655899.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:19.440Z,1516655899.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:19.851Z,1516655899.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:20.246Z,1516655900.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:20.652Z,1516655900.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:21.040Z,1516655901.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:21.441Z,1516655901.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:21.844Z,1516655901.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:22.236Z,1516655902.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:22.645Z,1516655902.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:23.049Z,1516655903.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:23.448Z,1516655903.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:23.849Z,1516655903.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:24.247Z,1516655904.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:24.643Z,1516655904.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:25.028Z,1516655905.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:25.428Z,1516655905.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:25.854Z,1516655905.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:26.254Z,1516655906.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:26.656Z,1516655906.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:27.032Z,1516655907.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:27.434Z,1516655907.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:27.836Z,1516655907.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:28.228Z,1516655908.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:28.632Z,1516655908.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:29.042Z,1516655909.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:29.460Z,1516655909.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:29.842Z,1516655909.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:30.234Z,1516655910.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:30.644Z,1516655910.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:31.034Z,1516655911.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:31.435Z,1516655911.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:31.852Z,1516655911.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:32.244Z,1516655912.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:32.644Z,1516655912.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:33.040Z,1516655913.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:33.435Z,1516655913.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:33.844Z,1516655913.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:34.243Z,1516655914.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:34.644Z,1516655914.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:35.053Z,1516655915.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:35.456Z,1516655915.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:35.851Z,1516655915.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:36.248Z,1516655916.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:36.640Z,1516655916.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:37.051Z,1516655917.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:37.445Z,1516655917.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:37.845Z,1516655917.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:38.244Z,1516655918.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:38.640Z,1516655918.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:39.042Z,1516655919.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:39.433Z,1516655919.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:39.840Z,1516655919.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:40.244Z,1516655920.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:40.640Z,1516655920.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:41.052Z,1516655921.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:41.446Z,1516655921.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:41.846Z,1516655921.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:42.240Z,1516655922.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:42.644Z,1516655922.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:43.039Z,1516655923.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:43.448Z,1516655923.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:43.842Z,1516655923.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:44.256Z,1516655924.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:44.417Z,1516655924.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:44.648Z,1516655924.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:45.038Z,1516655925.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:45.212Z,1516655925.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:45.443Z,1516655925.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:45.615Z,1516655925.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:45.844Z,1516655925.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:46.239Z,1516655926.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:46.641Z,1516655926.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:49.934Z,1516655929.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:50.076Z,1516655930.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:50.076Z,1516655930.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-01-22T21:18:50.076Z,1516655930.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:18:50.078Z,1516655930.078 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:50.078Z,1516655930.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-01-22T21:18:50.078Z,1516655930.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:18:50.080Z,1516655930.080 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:50.080Z,1516655930.080 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-01-22T21:18:50.080Z,1516655930.080 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:18:50.092Z,1516655930.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:18:50.092Z,1516655930.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:18:50.092Z,1516655930.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:18:50.439Z,1516655930.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:18:50.439Z,1516655930.439 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-01-22T21:18:50.439Z,1516655930.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:18:50.439Z,1516655930.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-01-22T21:18:50.440Z,1516655930.440 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:18:50.440Z,1516655930.440 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-01-22T21:18:50.809Z,1516655930.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:18:50.810Z,1516655930.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:18:50.832Z,1516655930.832 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:18:50.836Z,1516655930.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:18:50.837Z,1516655930.837 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:18:50.838Z,1516655930.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:18:50.867Z,1516655930.867 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:18:50.868Z,1516655930.868 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:18:50.869Z,1516655930.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:18:51.206Z,1516655931.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:51.605Z,1516655931.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:52.011Z,1516655932.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:52.416Z,1516655932.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:52.810Z,1516655932.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:53.216Z,1516655933.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:53.601Z,1516655933.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:54.000Z,1516655934.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:54.412Z,1516655934.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:54.809Z,1516655934.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:55.223Z,1516655935.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:55.624Z,1516655935.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:55.992Z,1516655935.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:56.397Z,1516655936.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:56.824Z,1516655936.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:57.274Z,1516655937.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:57.602Z,1516655937.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:57.997Z,1516655937.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:58.400Z,1516655938.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:58.467Z,1516655938.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:58.806Z,1516655938.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:59.263Z,1516655939.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:59.284Z,1516655939.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:59.606Z,1516655939.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:18:59.695Z,1516655939.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:18:59.996Z,1516655939.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:00.404Z,1516655940.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:00.806Z,1516655940.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:01.212Z,1516655941.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:01.616Z,1516655941.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:02.000Z,1516655942.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:02.399Z,1516655942.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:02.809Z,1516655942.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:03.216Z,1516655943.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:03.610Z,1516655943.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:03.996Z,1516655943.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:04.396Z,1516655944.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:04.796Z,1516655944.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:05.209Z,1516655945.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:05.610Z,1516655945.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:06.008Z,1516655946.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:06.401Z,1516655946.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:06.807Z,1516655946.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:07.206Z,1516655947.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:07.604Z,1516655947.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:08.009Z,1516655948.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:08.414Z,1516655948.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:08.816Z,1516655948.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:09.205Z,1516655949.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:09.604Z,1516655949.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:10.012Z,1516655950.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:10.404Z,1516655950.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:10.816Z,1516655950.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:11.276Z,1516655951.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:11.608Z,1516655951.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:12.013Z,1516655952.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:12.403Z,1516655952.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:12.808Z,1516655952.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:13.283Z,1516655953.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:13.612Z,1516655953.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:14.024Z,1516655954.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:14.420Z,1516655954.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:14.810Z,1516655954.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:15.208Z,1516655955.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:15.599Z,1516655955.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:16.016Z,1516655956.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:16.406Z,1516655956.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:16.804Z,1516655956.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:17.213Z,1516655957.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:17.614Z,1516655957.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:18.018Z,1516655958.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:18.416Z,1516655958.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:18.796Z,1516655958.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:19.219Z,1516655959.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:19.600Z,1516655959.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:20.028Z,1516655960.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:20.405Z,1516655960.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:20.806Z,1516655960.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:21.209Z,1516655961.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:21.609Z,1516655961.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:22.012Z,1516655962.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:22.409Z,1516655962.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:22.809Z,1516655962.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:23.217Z,1516655963.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:23.615Z,1516655963.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:24.018Z,1516655964.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:24.411Z,1516655964.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:24.809Z,1516655964.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:25.240Z,1516655965.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:25.596Z,1516655965.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:26.027Z,1516655966.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:26.422Z,1516655966.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:26.810Z,1516655966.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:27.203Z,1516655967.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:27.612Z,1516655967.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:27.996Z,1516655967.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:28.392Z,1516655968.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:28.799Z,1516655968.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:29.202Z,1516655969.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:29.618Z,1516655969.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:30.026Z,1516655970.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:30.400Z,1516655970.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:30.819Z,1516655970.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:31.207Z,1516655971.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:31.612Z,1516655971.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:32.013Z,1516655972.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:32.424Z,1516655972.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:32.817Z,1516655972.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:33.213Z,1516655973.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:33.598Z,1516655973.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:34.008Z,1516655974.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:34.400Z,1516655974.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:34.799Z,1516655974.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:35.217Z,1516655975.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:35.624Z,1516655975.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:36.016Z,1516655976.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:36.411Z,1516655976.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:36.809Z,1516655976.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:37.208Z,1516655977.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:37.611Z,1516655977.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:38.029Z,1516655978.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:38.415Z,1516655978.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:38.820Z,1516655978.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:39.203Z,1516655979.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:39.619Z,1516655979.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:40.000Z,1516655980.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:40.396Z,1516655980.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:40.796Z,1516655980.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:41.206Z,1516655981.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:41.613Z,1516655981.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:42.011Z,1516655982.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:42.407Z,1516655982.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:42.805Z,1516655982.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:43.205Z,1516655983.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:43.615Z,1516655983.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:44.011Z,1516655984.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:44.414Z,1516655984.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:44.809Z,1516655984.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:45.207Z,1516655985.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:45.605Z,1516655985.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:46.007Z,1516655986.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:46.412Z,1516655986.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:46.810Z,1516655986.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:50.082Z,1516655990.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:50.236Z,1516655990.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:50.577Z,1516655990.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:51.037Z,1516655991.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:51.376Z,1516655991.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:51.755Z,1516655991.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:52.184Z,1516655992.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:52.580Z,1516655992.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:52.984Z,1516655992.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:53.386Z,1516655993.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:53.775Z,1516655993.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:54.160Z,1516655994.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:54.560Z,1516655994.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:54.970Z,1516655994.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:55.399Z,1516655995.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:55.774Z,1516655995.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:56.161Z,1516655996.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:56.566Z,1516655996.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:57.023Z,1516655997.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:57.362Z,1516655997.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:57.770Z,1516655997.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:58.173Z,1516655998.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:58.576Z,1516655998.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:59.029Z,1516655999.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:59.384Z,1516655999.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:19:59.755Z,1516655999.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:00.160Z,1516656000.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:00.560Z,1516656000.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:01.026Z,1516656001.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:01.378Z,1516656001.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:01.773Z,1516656001.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:02.163Z,1516656002.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:02.563Z,1516656002.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:03.021Z,1516656003.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:03.370Z,1516656003.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:03.780Z,1516656003.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:04.188Z,1516656004.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:04.584Z,1516656004.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:05.004Z,1516656005.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:05.366Z,1516656005.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:05.764Z,1516656005.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:06.160Z,1516656006.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:06.565Z,1516656006.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:06.972Z,1516656006.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:07.401Z,1516656007.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:07.767Z,1516656007.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:08.163Z,1516656008.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:08.567Z,1516656008.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:08.968Z,1516656008.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:09.413Z,1516656009.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:09.772Z,1516656009.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:10.174Z,1516656010.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:10.577Z,1516656010.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:11.035Z,1516656011.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:11.360Z,1516656011.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:11.760Z,1516656011.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:12.164Z,1516656012.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:12.559Z,1516656012.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:13.044Z,1516656013.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:13.395Z,1516656013.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:13.766Z,1516656013.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:14.164Z,1516656014.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:14.558Z,1516656014.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:15.040Z,1516656015.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:15.390Z,1516656015.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:15.795Z,1516656015.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:16.160Z,1516656016.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:16.559Z,1516656016.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:17.044Z,1516656017.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:17.396Z,1516656017.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:17.766Z,1516656017.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:18.162Z,1516656018.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:18.567Z,1516656018.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:18.972Z,1516656018.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:19.382Z,1516656019.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:19.777Z,1516656019.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:20.164Z,1516656020.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:20.568Z,1516656020.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:20.985Z,1516656020.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:21.426Z,1516656021.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:21.777Z,1516656021.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:22.173Z,1516656022.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:22.573Z,1516656022.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:22.982Z,1516656022.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:23.425Z,1516656023.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:23.788Z,1516656023.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:24.168Z,1516656024.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:24.560Z,1516656024.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:25.044Z,1516656025.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:25.391Z,1516656025.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:25.793Z,1516656025.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:26.164Z,1516656026.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:26.564Z,1516656026.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:27.016Z,1516656027.016 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:20:27.016Z,1516656027.016 [BPC1] Communications Fault, FailCount= 4
2018-01-22T21:20:27.016Z,1516656027.016 [BPC1](ERROR): Communications Fault
2018-01-22T21:20:27.052Z,1516656027.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:27.099Z,1516656027.099 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:20:27.377Z,1516656027.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:27.771Z,1516656027.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:28.166Z,1516656028.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:28.180Z,1516656028.180 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:20:28.180Z,1516656028.180 [BPC1] No Fault, FailCount= 4
2018-01-22T21:20:28.613Z,1516656028.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:29.044Z,1516656029.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:29.369Z,1516656029.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:29.770Z,1516656029.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:30.164Z,1516656030.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:30.564Z,1516656030.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:30.962Z,1516656030.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:31.377Z,1516656031.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:31.773Z,1516656031.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:32.164Z,1516656032.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:32.571Z,1516656032.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:32.968Z,1516656032.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:33.375Z,1516656033.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:33.772Z,1516656033.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:34.181Z,1516656034.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:34.563Z,1516656034.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:34.972Z,1516656034.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:35.432Z,1516656035.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:35.769Z,1516656035.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:36.163Z,1516656036.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:36.569Z,1516656036.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:36.973Z,1516656036.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:37.431Z,1516656037.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:37.783Z,1516656037.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:38.164Z,1516656038.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:38.562Z,1516656038.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:38.973Z,1516656038.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:39.384Z,1516656039.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:39.773Z,1516656039.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:40.176Z,1516656040.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:40.569Z,1516656040.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:40.975Z,1516656040.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:41.388Z,1516656041.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:41.774Z,1516656041.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:42.155Z,1516656042.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:42.556Z,1516656042.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:42.982Z,1516656042.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:43.389Z,1516656043.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:43.791Z,1516656043.791 [BPC1](INFO): Initialized
2018-01-22T21:20:43.804Z,1516656043.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:44.172Z,1516656044.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:44.562Z,1516656044.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:44.976Z,1516656044.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:45.378Z,1516656045.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:45.778Z,1516656045.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:46.160Z,1516656046.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:46.556Z,1516656046.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:46.983Z,1516656046.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:50.201Z,1516656050.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:50.340Z,1516656050.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:50.617Z,1516656050.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:20:50.698Z,1516656050.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:51.101Z,1516656051.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:51.411Z,1516656051.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:20:51.502Z,1516656051.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:51.815Z,1516656051.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:20:51.903Z,1516656051.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:52.306Z,1516656052.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:52.709Z,1516656052.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:53.118Z,1516656053.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:53.151Z,1516656053.151 [CBIT](INFO): Clearing failed state for component DropWeight
2018-01-22T21:20:53.151Z,1516656053.151 [DropWeight] No Fault, FailCount= 1
2018-01-22T21:20:53.498Z,1516656053.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:53.896Z,1516656053.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:54.296Z,1516656054.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:54.706Z,1516656054.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:55.115Z,1516656055.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:55.512Z,1516656055.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:55.909Z,1516656055.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:56.300Z,1516656056.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:56.702Z,1516656056.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:57.120Z,1516656057.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:57.500Z,1516656057.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:57.896Z,1516656057.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:58.320Z,1516656058.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:58.709Z,1516656058.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:59.124Z,1516656059.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:59.508Z,1516656059.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:20:59.900Z,1516656059.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:00.304Z,1516656060.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:00.688Z,1516656060.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:01.158Z,1516656061.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:01.513Z,1516656061.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:01.916Z,1516656061.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:02.293Z,1516656062.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:02.692Z,1516656062.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:03.091Z,1516656063.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:03.515Z,1516656063.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:03.907Z,1516656063.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:04.318Z,1516656064.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:04.627Z,1516656064.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:04.713Z,1516656064.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:05.110Z,1516656065.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:05.423Z,1516656065.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:05.501Z,1516656065.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:05.831Z,1516656065.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:05.900Z,1516656065.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:06.296Z,1516656066.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:06.627Z,1516656066.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:06.693Z,1516656066.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:07.137Z,1516656067.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:07.423Z,1516656067.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:07.506Z,1516656067.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:07.827Z,1516656067.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:07.913Z,1516656067.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:08.302Z,1516656068.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:08.703Z,1516656068.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:09.147Z,1516656069.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:09.507Z,1516656069.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:09.912Z,1516656069.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:10.314Z,1516656070.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:10.718Z,1516656070.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:11.142Z,1516656071.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:11.504Z,1516656071.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:11.889Z,1516656071.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:12.289Z,1516656072.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:12.696Z,1516656072.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:13.165Z,1516656073.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:13.511Z,1516656073.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:13.919Z,1516656073.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:14.289Z,1516656074.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:14.692Z,1516656074.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:15.164Z,1516656075.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:15.500Z,1516656075.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:15.894Z,1516656075.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:16.308Z,1516656076.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:16.708Z,1516656076.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:17.108Z,1516656077.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:17.510Z,1516656077.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:17.896Z,1516656077.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:18.294Z,1516656078.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:18.651Z,1516656078.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:18.702Z,1516656078.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:19.108Z,1516656079.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:19.459Z,1516656079.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:19.514Z,1516656079.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:19.863Z,1516656079.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:19.907Z,1516656079.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:20.311Z,1516656080.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:20.703Z,1516656080.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:21.153Z,1516656081.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:21.507Z,1516656081.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:21.905Z,1516656081.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:22.309Z,1516656082.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:22.705Z,1516656082.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:23.156Z,1516656083.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:23.504Z,1516656083.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:23.888Z,1516656083.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:24.292Z,1516656084.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:24.687Z,1516656084.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:25.153Z,1516656085.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:25.502Z,1516656085.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:25.902Z,1516656085.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:26.293Z,1516656086.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:26.696Z,1516656086.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:27.182Z,1516656087.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:27.503Z,1516656087.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:27.903Z,1516656087.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:28.312Z,1516656088.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:28.709Z,1516656088.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:29.146Z,1516656089.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:29.488Z,1516656089.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:29.888Z,1516656089.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:30.288Z,1516656090.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:30.696Z,1516656090.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:31.114Z,1516656091.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:31.531Z,1516656091.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:31.903Z,1516656091.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:32.294Z,1516656092.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:32.679Z,1516656092.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:32.696Z,1516656092.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:33.100Z,1516656093.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:33.475Z,1516656093.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:33.514Z,1516656093.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:33.896Z,1516656093.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:33.923Z,1516656093.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:34.309Z,1516656094.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:34.705Z,1516656094.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:34.719Z,1516656094.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:35.149Z,1516656095.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:35.514Z,1516656095.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:35.515Z,1516656095.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:35.888Z,1516656095.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:35.919Z,1516656095.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:36.292Z,1516656096.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:36.688Z,1516656096.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:37.157Z,1516656097.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:37.503Z,1516656097.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:37.904Z,1516656097.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:38.295Z,1516656098.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:38.702Z,1516656098.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:39.152Z,1516656099.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:39.504Z,1516656099.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:39.888Z,1516656099.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:40.305Z,1516656100.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:40.702Z,1516656100.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:41.154Z,1516656101.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:41.499Z,1516656101.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:41.896Z,1516656101.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:42.305Z,1516656102.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:42.699Z,1516656102.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:43.113Z,1516656103.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:43.517Z,1516656103.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:43.920Z,1516656103.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:44.301Z,1516656104.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:44.708Z,1516656104.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:45.110Z,1516656105.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:45.560Z,1516656105.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:45.912Z,1516656105.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:46.288Z,1516656106.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:46.300Z,1516656106.300 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T21:16:45.0Z
2018-01-22T21:21:46.300Z,1516656106.300 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:21:46.300Z,1516656106.300 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T21:21:46.688Z,1516656106.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:46.728Z,1516656106.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:47.224Z,1516656107.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:47.524Z,1516656107.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:47.927Z,1516656107.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:21:50.983Z,1516656110.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:50.983Z,1516656110.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-01-22T21:21:50.983Z,1516656110.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:21:50.985Z,1516656110.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:50.985Z,1516656110.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-01-22T21:21:50.985Z,1516656110.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:21:50.987Z,1516656110.987 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:50.987Z,1516656110.987 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-01-22T21:21:50.987Z,1516656110.987 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:21:51.052Z,1516656111.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:21:51.053Z,1516656111.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:21:51.053Z,1516656111.053 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:21:51.075Z,1516656111.075 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0072.lzma
2018-01-22T21:21:51.278Z,1516656111.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:21:51.278Z,1516656111.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-01-22T21:21:51.278Z,1516656111.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:21:51.278Z,1516656111.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-01-22T21:21:51.296Z,1516656111.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:21:51.296Z,1516656111.296 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-01-22T21:21:51.521Z,1516656111.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:21:51.522Z,1516656111.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:21:51.522Z,1516656111.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:21:51.523Z,1516656111.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:21:51.524Z,1516656111.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:21:51.524Z,1516656111.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:21:51.524Z,1516656111.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:21:51.525Z,1516656111.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:21:51.525Z,1516656111.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:21:51.881Z,1516656111.881 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0072.lzma.bak
2018-01-22T21:21:51.881Z,1516656111.881 [DataOverHttps](INFO): SBD MOMSN=7751862
2018-01-22T21:21:51.954Z,1516656111.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:52.813Z,1516656112.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:52.959Z,1516656112.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:59.156Z,1516656119.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:59.296Z,1516656119.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:21:59.677Z,1516656119.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:00.065Z,1516656120.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:00.468Z,1516656120.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:00.880Z,1516656120.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:04.576Z,1516656124.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:04.656Z,1516656124.656 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0073.lzma
2018-01-22T21:22:04.720Z,1516656124.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:05.049Z,1516656125.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:05.416Z,1516656125.416 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0073.lzma.bak
2018-01-22T21:22:05.416Z,1516656125.416 [DataOverHttps](INFO): SBD MOMSN=7751864
2018-01-22T21:22:05.479Z,1516656125.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:06.052Z,1516656126.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:06.078Z,1516656126.078 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T21:22:06.078Z,1516656126.078 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T21:22:06.079Z,1516656126.079 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T21:22:06.252Z,1516656126.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:09.578Z,1516656129.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:09.724Z,1516656129.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:10.074Z,1516656130.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:10.472Z,1516656130.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:10.850Z,1516656130.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:11.281Z,1516656131.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:11.652Z,1516656131.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:12.042Z,1516656132.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:12.450Z,1516656132.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:12.849Z,1516656132.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:13.250Z,1516656133.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:13.652Z,1516656133.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:14.051Z,1516656134.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:14.443Z,1516656134.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:14.850Z,1516656134.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:15.256Z,1516656135.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:15.677Z,1516656135.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:16.049Z,1516656136.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:16.448Z,1516656136.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:16.848Z,1516656136.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:17.248Z,1516656137.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:17.645Z,1516656137.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:18.052Z,1516656138.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:18.455Z,1516656138.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:18.853Z,1516656138.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:19.262Z,1516656139.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:19.643Z,1516656139.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:20.048Z,1516656140.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:20.448Z,1516656140.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:20.852Z,1516656140.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:21.256Z,1516656141.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:21.655Z,1516656141.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:22.060Z,1516656142.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:22.448Z,1516656142.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:22.844Z,1516656142.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:23.250Z,1516656143.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:23.648Z,1516656143.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:24.044Z,1516656144.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:24.456Z,1516656144.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:24.860Z,1516656144.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:25.304Z,1516656145.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:25.648Z,1516656145.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:26.047Z,1516656146.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:26.452Z,1516656146.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:26.843Z,1516656146.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:27.260Z,1516656147.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:27.664Z,1516656147.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:28.060Z,1516656148.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:28.456Z,1516656148.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:28.851Z,1516656148.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:29.256Z,1516656149.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:29.656Z,1516656149.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:30.035Z,1516656150.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:30.524Z,1516656150.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:30.868Z,1516656150.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:31.268Z,1516656151.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:31.648Z,1516656151.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:32.040Z,1516656152.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:32.444Z,1516656152.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:32.844Z,1516656152.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:33.274Z,1516656153.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:33.660Z,1516656153.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:34.066Z,1516656154.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:34.444Z,1516656154.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:34.840Z,1516656154.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:35.274Z,1516656155.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:35.649Z,1516656155.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:36.049Z,1516656156.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:36.450Z,1516656156.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:36.856Z,1516656156.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:37.281Z,1516656157.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:37.652Z,1516656157.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:38.047Z,1516656158.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:38.450Z,1516656158.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:38.841Z,1516656158.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:39.302Z,1516656159.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:39.660Z,1516656159.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:40.063Z,1516656160.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:40.457Z,1516656160.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:40.841Z,1516656160.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:41.240Z,1516656161.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:41.665Z,1516656161.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:42.040Z,1516656162.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:42.461Z,1516656162.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:42.868Z,1516656162.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:43.271Z,1516656163.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:43.669Z,1516656163.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:44.041Z,1516656164.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:44.447Z,1516656164.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:44.852Z,1516656164.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:45.294Z,1516656165.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:45.651Z,1516656165.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:46.080Z,1516656166.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:46.443Z,1516656166.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:46.852Z,1516656166.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:47.294Z,1516656167.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:47.661Z,1516656167.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:48.048Z,1516656168.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:48.458Z,1516656168.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:48.868Z,1516656168.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:49.292Z,1516656169.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:49.648Z,1516656169.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:50.052Z,1516656170.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:50.444Z,1516656170.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:50.844Z,1516656170.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:51.312Z,1516656171.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:51.664Z,1516656171.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:52.058Z,1516656172.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:52.451Z,1516656172.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:52.849Z,1516656172.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:53.306Z,1516656173.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:53.660Z,1516656173.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:54.036Z,1516656174.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:54.459Z,1516656174.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:54.872Z,1516656174.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:55.258Z,1516656175.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:55.669Z,1516656175.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:56.040Z,1516656176.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:56.444Z,1516656176.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:56.842Z,1516656176.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:57.250Z,1516656177.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:57.658Z,1516656177.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:58.056Z,1516656178.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:58.448Z,1516656178.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:58.860Z,1516656178.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:59.313Z,1516656179.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:22:59.654Z,1516656179.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:00.052Z,1516656180.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:00.456Z,1516656180.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:00.861Z,1516656180.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:01.314Z,1516656181.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:01.660Z,1516656181.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:02.053Z,1516656182.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:02.452Z,1516656182.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:02.852Z,1516656182.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:03.306Z,1516656183.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:03.658Z,1516656183.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:04.068Z,1516656184.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:04.456Z,1516656184.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:04.854Z,1516656184.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:05.312Z,1516656185.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:05.645Z,1516656185.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:06.044Z,1516656186.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:06.450Z,1516656186.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:06.851Z,1516656186.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:10.200Z,1516656190.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:10.309Z,1516656190.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:10.695Z,1516656190.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:11.098Z,1516656191.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:11.492Z,1516656191.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:11.892Z,1516656191.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:12.306Z,1516656192.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:12.704Z,1516656192.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:13.104Z,1516656193.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:13.494Z,1516656193.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:13.892Z,1516656193.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:14.297Z,1516656194.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:14.701Z,1516656194.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:15.097Z,1516656195.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:15.520Z,1516656195.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:15.915Z,1516656195.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:16.304Z,1516656196.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:16.706Z,1516656196.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:17.084Z,1516656197.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:17.488Z,1516656197.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:17.884Z,1516656197.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:18.256Z,1516656198.256 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T21:23:18.257Z,1516656198.257 [NAL9602] Data Fault, FailCount= 3
2018-01-22T21:23:18.257Z,1516656198.257 [NAL9602](ERROR): Data Fault
2018-01-22T21:23:18.288Z,1516656198.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:18.322Z,1516656198.322 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T21:23:18.652Z,1516656198.652 [NAL9602](INFO): Powering down
2018-01-22T21:23:18.708Z,1516656198.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:19.089Z,1516656199.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:19.495Z,1516656199.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:19.524Z,1516656199.524 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T21:23:19.524Z,1516656199.524 [NAL9602] No Fault, FailCount= 3
2018-01-22T21:23:19.900Z,1516656199.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:20.291Z,1516656200.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:20.695Z,1516656200.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:21.093Z,1516656201.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:21.489Z,1516656201.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:21.892Z,1516656201.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:22.296Z,1516656202.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:22.689Z,1516656202.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:23.099Z,1516656203.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:23.490Z,1516656203.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:23.904Z,1516656203.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:24.290Z,1516656204.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:24.695Z,1516656204.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:25.099Z,1516656205.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:25.507Z,1516656205.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:25.904Z,1516656205.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:26.290Z,1516656206.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:26.702Z,1516656206.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:27.095Z,1516656207.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:27.504Z,1516656207.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:27.890Z,1516656207.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:28.289Z,1516656208.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:28.703Z,1516656208.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:29.097Z,1516656209.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:29.496Z,1516656209.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:29.896Z,1516656209.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:30.303Z,1516656210.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:30.696Z,1516656210.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:31.096Z,1516656211.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:31.498Z,1516656211.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:31.904Z,1516656211.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:32.305Z,1516656212.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:32.707Z,1516656212.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:33.100Z,1516656213.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:33.513Z,1516656213.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:33.901Z,1516656213.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:34.306Z,1516656214.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:34.688Z,1516656214.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:35.106Z,1516656215.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:35.495Z,1516656215.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:35.908Z,1516656215.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:36.300Z,1516656216.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:36.699Z,1516656216.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:37.100Z,1516656217.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:37.504Z,1516656217.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:37.904Z,1516656217.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:38.305Z,1516656218.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:38.704Z,1516656218.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:39.097Z,1516656219.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:39.497Z,1516656219.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:39.900Z,1516656219.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:40.296Z,1516656220.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:40.703Z,1516656220.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:41.108Z,1516656221.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:41.497Z,1516656221.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:41.901Z,1516656221.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:42.297Z,1516656222.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:42.700Z,1516656222.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:43.104Z,1516656223.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:43.506Z,1516656223.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:43.900Z,1516656223.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:44.307Z,1516656224.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:44.708Z,1516656224.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:45.103Z,1516656225.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:45.504Z,1516656225.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:45.908Z,1516656225.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:46.316Z,1516656226.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:46.686Z,1516656226.686 [PNI_TCM](ERROR): CRC does not match. Expected:0x21514 got:0x57117
2018-01-22T21:23:46.705Z,1516656226.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:47.101Z,1516656227.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:47.503Z,1516656227.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:47.904Z,1516656227.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:48.301Z,1516656228.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:48.705Z,1516656228.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:49.052Z,1516656229.052 [NAL9602](INFO): Powering up NAL9602
2018-01-22T21:23:49.089Z,1516656229.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:49.516Z,1516656229.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:49.892Z,1516656229.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:50.292Z,1516656230.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:50.700Z,1516656230.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:51.119Z,1516656231.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:51.503Z,1516656231.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:51.895Z,1516656231.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:52.296Z,1516656232.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:52.707Z,1516656232.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:53.097Z,1516656233.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:53.497Z,1516656233.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:53.895Z,1516656233.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:54.308Z,1516656234.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:54.699Z,1516656234.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:55.097Z,1516656235.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:55.500Z,1516656235.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:55.910Z,1516656235.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:56.301Z,1516656236.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:56.707Z,1516656236.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:57.096Z,1516656237.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:57.522Z,1516656237.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:57.901Z,1516656237.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:58.296Z,1516656238.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:58.697Z,1516656238.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:59.126Z,1516656239.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:59.502Z,1516656239.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:23:59.909Z,1516656239.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:00.252Z,1516656240.252 [NAL9602](INFO): NAL9602 initialized
2018-01-22T21:24:00.308Z,1516656240.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:00.715Z,1516656240.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:01.111Z,1516656241.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:01.509Z,1516656241.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:01.916Z,1516656241.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:02.330Z,1516656242.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:02.694Z,1516656242.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:03.108Z,1516656243.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:03.499Z,1516656243.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:03.934Z,1516656243.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:04.313Z,1516656244.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:04.711Z,1516656244.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:05.108Z,1516656245.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:05.508Z,1516656245.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:05.893Z,1516656245.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:06.306Z,1516656246.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:06.708Z,1516656246.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:07.137Z,1516656247.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:10.450Z,1516656250.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:10.587Z,1516656250.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:10.916Z,1516656250.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:11.383Z,1516656251.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:11.716Z,1516656251.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:12.122Z,1516656252.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:12.522Z,1516656252.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:12.922Z,1516656252.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:13.397Z,1516656253.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:13.726Z,1516656253.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:14.115Z,1516656254.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:14.515Z,1516656254.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:14.925Z,1516656254.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:15.395Z,1516656255.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:15.736Z,1516656255.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:16.128Z,1516656256.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:16.516Z,1516656256.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:16.916Z,1516656256.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:17.327Z,1516656257.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:17.735Z,1516656257.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:18.133Z,1516656258.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:18.533Z,1516656258.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:18.928Z,1516656258.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:19.325Z,1516656259.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:19.775Z,1516656259.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:20.120Z,1516656260.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:20.532Z,1516656260.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:20.941Z,1516656260.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:21.331Z,1516656261.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:21.780Z,1516656261.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:22.134Z,1516656262.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:22.529Z,1516656262.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:22.936Z,1516656262.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:23.391Z,1516656263.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:23.711Z,1516656263.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:24.120Z,1516656264.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:24.516Z,1516656264.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:24.922Z,1516656264.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:25.322Z,1516656265.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:25.732Z,1516656265.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:26.116Z,1516656266.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:26.524Z,1516656266.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:26.916Z,1516656266.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:27.316Z,1516656267.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:27.744Z,1516656267.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:28.133Z,1516656268.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:28.530Z,1516656268.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:28.920Z,1516656268.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:29.328Z,1516656269.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:29.708Z,1516656269.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:30.112Z,1516656270.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:30.508Z,1516656270.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:30.938Z,1516656270.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:31.341Z,1516656271.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:31.746Z,1516656271.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:32.120Z,1516656272.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:32.516Z,1516656272.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:32.915Z,1516656272.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:33.316Z,1516656273.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:33.796Z,1516656273.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:34.133Z,1516656274.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:34.539Z,1516656274.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:34.932Z,1516656274.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:35.312Z,1516656275.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:35.785Z,1516656275.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:36.120Z,1516656276.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:36.516Z,1516656276.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:36.942Z,1516656276.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:37.337Z,1516656277.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:37.722Z,1516656277.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:38.124Z,1516656278.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:38.525Z,1516656278.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:38.925Z,1516656278.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:39.316Z,1516656279.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:39.736Z,1516656279.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:40.141Z,1516656280.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:40.528Z,1516656280.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:40.921Z,1516656280.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:41.323Z,1516656281.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:41.729Z,1516656281.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:42.124Z,1516656282.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:42.508Z,1516656282.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:42.934Z,1516656282.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:43.338Z,1516656283.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:43.729Z,1516656283.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:44.121Z,1516656284.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:44.520Z,1516656284.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:44.928Z,1516656284.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:45.330Z,1516656285.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:45.738Z,1516656285.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:46.140Z,1516656286.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:46.534Z,1516656286.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:46.912Z,1516656286.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:47.309Z,1516656287.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:47.756Z,1516656287.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:48.121Z,1516656288.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:48.520Z,1516656288.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:48.924Z,1516656288.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:49.344Z,1516656289.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:49.792Z,1516656289.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:50.120Z,1516656290.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:50.515Z,1516656290.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:50.920Z,1516656290.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:51.324Z,1516656291.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:51.727Z,1516656291.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:51.727Z,1516656291.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-01-22T21:24:51.727Z,1516656291.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:24:51.729Z,1516656291.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:51.729Z,1516656291.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-01-22T21:24:51.729Z,1516656291.729 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:24:51.731Z,1516656291.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:51.731Z,1516656291.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-01-22T21:24:51.731Z,1516656291.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:24:51.745Z,1516656291.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:24:51.745Z,1516656291.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:24:51.745Z,1516656291.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:24:52.145Z,1516656292.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:24:52.145Z,1516656292.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-01-22T21:24:52.145Z,1516656292.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:24:52.145Z,1516656292.145 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-01-22T21:24:52.146Z,1516656292.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:24:52.146Z,1516656292.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-01-22T21:24:52.533Z,1516656292.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:24:52.534Z,1516656292.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:24:52.534Z,1516656292.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:24:52.535Z,1516656292.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:24:52.535Z,1516656292.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:24:52.535Z,1516656292.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:24:52.536Z,1516656292.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:24:52.536Z,1516656292.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:24:52.537Z,1516656292.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:24:52.928Z,1516656292.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:53.333Z,1516656293.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:53.714Z,1516656293.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:54.119Z,1516656294.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:54.523Z,1516656294.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:54.928Z,1516656294.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:55.328Z,1516656295.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:55.738Z,1516656295.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:56.124Z,1516656296.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:56.525Z,1516656296.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:56.928Z,1516656296.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:57.308Z,1516656297.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:57.734Z,1516656297.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:58.138Z,1516656298.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:58.522Z,1516656298.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:58.916Z,1516656298.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:59.316Z,1516656299.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:24:59.724Z,1516656299.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:00.120Z,1516656300.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:00.518Z,1516656300.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:00.922Z,1516656300.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:01.321Z,1516656301.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:01.722Z,1516656301.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:02.120Z,1516656302.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:02.520Z,1516656302.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:02.919Z,1516656302.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:03.320Z,1516656303.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:03.729Z,1516656303.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:04.132Z,1516656304.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:04.528Z,1516656304.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:04.921Z,1516656304.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:05.323Z,1516656305.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:05.724Z,1516656305.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:06.120Z,1516656306.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:06.524Z,1516656306.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:06.930Z,1516656306.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:07.332Z,1516656307.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:10.606Z,1516656310.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:10.730Z,1516656310.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:11.103Z,1516656311.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:11.541Z,1516656311.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:11.896Z,1516656311.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:12.295Z,1516656312.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:12.709Z,1516656312.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:13.113Z,1516656313.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:13.562Z,1516656313.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:13.905Z,1516656313.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:14.296Z,1516656314.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:14.696Z,1516656314.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:15.092Z,1516656315.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:15.500Z,1516656315.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:15.928Z,1516656315.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:16.331Z,1516656316.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:16.702Z,1516656316.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:17.100Z,1516656317.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:17.494Z,1516656317.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:17.904Z,1516656317.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:18.293Z,1516656318.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:18.702Z,1516656318.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:19.102Z,1516656319.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:19.535Z,1516656319.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:19.908Z,1516656319.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:20.296Z,1516656320.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:20.695Z,1516656320.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:21.112Z,1516656321.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:21.513Z,1516656321.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:21.943Z,1516656321.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:22.320Z,1516656322.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:22.719Z,1516656322.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:23.108Z,1516656323.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:23.532Z,1516656323.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:23.892Z,1516656323.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:24.296Z,1516656324.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:24.702Z,1516656324.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:25.126Z,1516656325.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:25.542Z,1516656325.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:25.897Z,1516656325.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:26.302Z,1516656326.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:26.696Z,1516656326.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:27.108Z,1516656327.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:27.561Z,1516656327.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:27.918Z,1516656327.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:28.321Z,1516656328.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:28.718Z,1516656328.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:29.092Z,1516656329.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:29.488Z,1516656329.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:29.896Z,1516656329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:30.292Z,1516656330.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:30.715Z,1516656330.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:31.114Z,1516656331.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:31.516Z,1516656331.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:31.924Z,1516656331.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:32.308Z,1516656332.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:32.692Z,1516656332.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:33.108Z,1516656333.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:33.548Z,1516656333.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:33.903Z,1516656333.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:34.303Z,1516656334.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:34.702Z,1516656334.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:35.099Z,1516656335.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:35.555Z,1516656335.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:35.904Z,1516656335.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:36.294Z,1516656336.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:36.715Z,1516656336.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:37.116Z,1516656337.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:37.550Z,1516656337.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:37.908Z,1516656337.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:38.301Z,1516656338.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:38.701Z,1516656338.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:39.108Z,1516656339.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:39.556Z,1516656339.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:39.910Z,1516656339.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:40.321Z,1516656340.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:40.710Z,1516656340.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:41.103Z,1516656341.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:41.558Z,1516656341.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:41.901Z,1516656341.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:42.292Z,1516656342.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:42.715Z,1516656342.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:43.110Z,1516656343.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:43.502Z,1516656343.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:43.892Z,1516656343.892 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:25:43.893Z,1516656343.893 [BPC1] Communications Fault, FailCount= 5
2018-01-22T21:25:43.893Z,1516656343.893 [BPC1](ERROR): Communications Fault
2018-01-22T21:25:43.905Z,1516656343.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:43.955Z,1516656343.955 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:25:44.296Z,1516656344.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:44.708Z,1516656344.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:45.104Z,1516656345.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:45.136Z,1516656345.136 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:25:45.136Z,1516656345.136 [BPC1] No Fault, FailCount= 5
2018-01-22T21:25:45.552Z,1516656345.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:45.912Z,1516656345.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:46.297Z,1516656346.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:46.716Z,1516656346.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:47.109Z,1516656347.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:47.580Z,1516656347.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:47.913Z,1516656347.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:48.296Z,1516656348.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:48.703Z,1516656348.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:49.104Z,1516656349.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:49.568Z,1516656349.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:49.594Z,1516656349.594 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T21:25:49.925Z,1516656349.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:50.318Z,1516656350.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:50.701Z,1516656350.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:51.091Z,1516656351.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:51.561Z,1516656351.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:51.903Z,1516656351.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:52.305Z,1516656352.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:52.708Z,1516656352.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:53.105Z,1516656353.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:53.565Z,1516656353.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:53.906Z,1516656353.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:54.304Z,1516656354.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:54.720Z,1516656354.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:55.119Z,1516656355.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:55.571Z,1516656355.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:55.894Z,1516656355.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:56.288Z,1516656356.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:56.717Z,1516656356.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:57.101Z,1516656357.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:57.501Z,1516656357.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:57.934Z,1516656357.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:58.295Z,1516656358.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:58.698Z,1516656358.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:59.106Z,1516656359.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:59.504Z,1516656359.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:25:59.934Z,1516656359.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:00.294Z,1516656360.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:00.723Z,1516656360.723 [BPC1](INFO): Initialized
2018-01-22T21:26:00.739Z,1516656360.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:01.102Z,1516656361.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:01.553Z,1516656361.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:01.895Z,1516656361.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:02.304Z,1516656362.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:02.712Z,1516656362.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:03.107Z,1516656363.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:03.572Z,1516656363.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:03.892Z,1516656363.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:04.287Z,1516656364.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:04.715Z,1516656364.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:05.115Z,1516656365.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:05.565Z,1516656365.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:05.902Z,1516656365.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:06.296Z,1516656366.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:06.690Z,1516656366.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:07.106Z,1516656367.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:07.580Z,1516656367.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:10.791Z,1516656370.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:10.923Z,1516656370.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:11.270Z,1516656371.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:11.660Z,1516656371.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:12.060Z,1516656372.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:12.454Z,1516656372.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:12.868Z,1516656372.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:13.261Z,1516656373.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:13.662Z,1516656373.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:14.060Z,1516656374.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:14.455Z,1516656374.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:14.862Z,1516656374.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:15.260Z,1516656375.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:15.654Z,1516656375.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:16.070Z,1516656376.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:16.464Z,1516656376.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:16.865Z,1516656376.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:17.256Z,1516656377.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:17.660Z,1516656377.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:18.056Z,1516656378.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:18.454Z,1516656378.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:18.868Z,1516656378.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:19.270Z,1516656379.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:19.664Z,1516656379.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:20.060Z,1516656380.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:20.456Z,1516656380.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:20.855Z,1516656380.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:21.263Z,1516656381.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:21.663Z,1516656381.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:22.070Z,1516656382.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:22.479Z,1516656382.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:22.869Z,1516656382.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:23.260Z,1516656383.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:23.675Z,1516656383.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:24.068Z,1516656384.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:24.464Z,1516656384.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:24.873Z,1516656384.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:25.270Z,1516656385.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:25.675Z,1516656385.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:26.068Z,1516656386.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:26.460Z,1516656386.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:26.868Z,1516656386.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:27.244Z,1516656387.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:27.648Z,1516656387.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:28.075Z,1516656388.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:28.481Z,1516656388.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:28.875Z,1516656388.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:29.256Z,1516656389.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:29.647Z,1516656389.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:30.056Z,1516656390.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:30.456Z,1516656390.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:30.882Z,1516656390.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:31.282Z,1516656391.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:31.658Z,1516656391.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:32.056Z,1516656392.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:32.456Z,1516656392.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:32.856Z,1516656392.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:33.251Z,1516656393.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:33.656Z,1516656393.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:34.085Z,1516656394.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:34.500Z,1516656394.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:34.872Z,1516656394.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:35.253Z,1516656395.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:35.651Z,1516656395.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:36.052Z,1516656396.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:36.456Z,1516656396.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:36.874Z,1516656396.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:37.274Z,1516656397.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:37.696Z,1516656397.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:38.058Z,1516656398.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:38.465Z,1516656398.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:38.864Z,1516656398.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:39.269Z,1516656399.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:39.658Z,1516656399.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:40.080Z,1516656400.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:40.480Z,1516656400.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:40.871Z,1516656400.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:41.262Z,1516656401.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:41.660Z,1516656401.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:42.064Z,1516656402.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:42.457Z,1516656402.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:42.878Z,1516656402.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:43.269Z,1516656403.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:43.666Z,1516656403.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:44.060Z,1516656404.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:44.464Z,1516656404.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:44.865Z,1516656404.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:45.270Z,1516656405.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:45.670Z,1516656405.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:46.077Z,1516656406.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:46.473Z,1516656406.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:46.872Z,1516656406.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:47.265Z,1516656407.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:47.673Z,1516656407.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:48.068Z,1516656408.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:48.473Z,1516656408.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:48.879Z,1516656408.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:49.272Z,1516656409.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:49.688Z,1516656409.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:50.048Z,1516656410.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:50.452Z,1516656410.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:50.872Z,1516656410.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:51.268Z,1516656411.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:51.752Z,1516656411.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:52.080Z,1516656412.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:52.464Z,1516656412.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:52.895Z,1516656412.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:53.268Z,1516656413.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:53.715Z,1516656413.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:54.071Z,1516656414.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:54.468Z,1516656414.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:54.872Z,1516656414.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:55.270Z,1516656415.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:55.680Z,1516656415.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:56.086Z,1516656416.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:56.461Z,1516656416.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:56.873Z,1516656416.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:57.276Z,1516656417.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:57.680Z,1516656417.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:58.076Z,1516656418.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:58.516Z,1516656418.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:58.887Z,1516656418.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:59.276Z,1516656419.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:26:59.684Z,1516656419.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:00.062Z,1516656420.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:00.486Z,1516656420.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:00.884Z,1516656420.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:01.300Z,1516656421.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:01.708Z,1516656421.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:02.084Z,1516656422.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:02.455Z,1516656422.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:02.859Z,1516656422.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:03.256Z,1516656423.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:03.690Z,1516656423.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:04.063Z,1516656424.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:04.463Z,1516656424.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:04.864Z,1516656424.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:05.254Z,1516656425.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:05.729Z,1516656425.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:06.062Z,1516656426.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:06.452Z,1516656426.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:06.471Z,1516656426.471 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T21:27:06.471Z,1516656426.471 [Default:CheckIn:C.Wait] Stopped
2018-01-22T21:27:06.472Z,1516656426.472 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T21:27:06.472Z,1516656426.472 [Default:CheckIn:D] Running Loop=1
2018-01-22T21:27:06.878Z,1516656426.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:06.886Z,1516656426.886 [Default:CheckIn:D] Stopped
2018-01-22T21:27:06.886Z,1516656426.886 [Default:CheckIn:E] Running Loop=1
2018-01-22T21:27:07.257Z,1516656427.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:07.261Z,1516656427.261 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.703304 min 
2018-01-22T21:27:07.261Z,1516656427.261 [Default:CheckIn:E] Stopped
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn] Stopped
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn](INFO): Running loop #19
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn] Running Loop=19
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T21:27:07.262Z,1516656427.262 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T21:27:07.685Z,1516656427.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:10.875Z,1516656430.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:11.056Z,1516656431.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:11.368Z,1516656431.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:11.752Z,1516656431.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:12.152Z,1516656432.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:12.540Z,1516656432.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:12.932Z,1516656432.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:13.336Z,1516656433.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:13.744Z,1516656433.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:14.146Z,1516656434.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:14.588Z,1516656434.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:14.945Z,1516656434.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:15.336Z,1516656435.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:15.731Z,1516656435.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:16.140Z,1516656436.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:16.583Z,1516656436.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:16.956Z,1516656436.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:17.360Z,1516656437.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:17.756Z,1516656437.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:18.141Z,1516656438.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:18.539Z,1516656438.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:18.951Z,1516656438.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:19.340Z,1516656439.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:19.757Z,1516656439.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:20.153Z,1516656440.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:20.549Z,1516656440.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:20.952Z,1516656440.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:21.342Z,1516656441.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:21.746Z,1516656441.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:22.140Z,1516656442.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:22.548Z,1516656442.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:22.954Z,1516656442.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:23.353Z,1516656443.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:23.754Z,1516656443.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:24.142Z,1516656444.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:24.546Z,1516656444.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:24.957Z,1516656444.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:25.344Z,1516656445.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:25.741Z,1516656445.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:26.150Z,1516656446.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:26.556Z,1516656446.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:26.964Z,1516656446.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:27.333Z,1516656447.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:27.732Z,1516656447.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:28.137Z,1516656448.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:28.532Z,1516656448.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:28.967Z,1516656448.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:29.366Z,1516656449.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:29.771Z,1516656449.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:30.140Z,1516656450.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:30.540Z,1516656450.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:30.940Z,1516656450.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:31.335Z,1516656451.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:31.744Z,1516656451.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:32.146Z,1516656452.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:32.541Z,1516656452.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:32.945Z,1516656452.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:33.344Z,1516656453.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:33.784Z,1516656453.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:34.143Z,1516656454.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:34.548Z,1516656454.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:34.952Z,1516656454.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:35.352Z,1516656455.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:35.752Z,1516656455.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:36.138Z,1516656456.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:36.542Z,1516656456.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:36.943Z,1516656456.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:37.349Z,1516656457.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:37.739Z,1516656457.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:38.182Z,1516656458.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:38.557Z,1516656458.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:38.956Z,1516656458.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:39.344Z,1516656459.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:39.745Z,1516656459.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:40.157Z,1516656460.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:40.556Z,1516656460.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:40.960Z,1516656460.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:41.353Z,1516656461.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:41.756Z,1516656461.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:42.152Z,1516656462.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:42.552Z,1516656462.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:42.948Z,1516656462.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:43.329Z,1516656463.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:43.757Z,1516656463.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:44.161Z,1516656464.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:44.551Z,1516656464.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:44.960Z,1516656464.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:45.348Z,1516656465.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:45.753Z,1516656465.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:46.152Z,1516656466.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:46.545Z,1516656466.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:46.954Z,1516656466.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:47.354Z,1516656467.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:47.801Z,1516656467.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:48.151Z,1516656468.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:48.550Z,1516656468.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:48.944Z,1516656468.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:49.352Z,1516656469.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:49.736Z,1516656469.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:50.172Z,1516656470.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:50.568Z,1516656470.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:50.958Z,1516656470.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:51.349Z,1516656471.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:51.737Z,1516656471.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:52.146Z,1516656472.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:52.548Z,1516656472.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:52.548Z,1516656472.548 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-01-22T21:27:52.548Z,1516656472.548 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:27:52.550Z,1516656472.550 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:52.550Z,1516656472.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-01-22T21:27:52.550Z,1516656472.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:27:52.556Z,1516656472.556 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:52.556Z,1516656472.556 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-01-22T21:27:52.556Z,1516656472.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:27:52.593Z,1516656472.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:27:52.593Z,1516656472.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:27:52.593Z,1516656472.593 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:27:52.959Z,1516656472.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:27:52.959Z,1516656472.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-01-22T21:27:52.959Z,1516656472.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:27:52.959Z,1516656472.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-01-22T21:27:52.960Z,1516656472.960 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:27:52.960Z,1516656472.960 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-01-22T21:27:53.351Z,1516656473.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:27:53.352Z,1516656473.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:27:53.352Z,1516656473.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:27:53.352Z,1516656473.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:27:53.353Z,1516656473.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:27:53.353Z,1516656473.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:27:53.353Z,1516656473.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:27:53.354Z,1516656473.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:27:53.354Z,1516656473.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:27:53.761Z,1516656473.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:54.148Z,1516656474.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:54.540Z,1516656474.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:54.956Z,1516656474.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:55.345Z,1516656475.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:55.771Z,1516656475.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:56.168Z,1516656476.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:56.551Z,1516656476.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:56.958Z,1516656476.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:57.348Z,1516656477.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:57.775Z,1516656477.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:58.148Z,1516656478.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:58.542Z,1516656478.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:58.952Z,1516656478.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:59.357Z,1516656479.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:27:59.781Z,1516656479.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:00.148Z,1516656480.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:00.544Z,1516656480.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:01.002Z,1516656481.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:01.351Z,1516656481.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:01.796Z,1516656481.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:02.162Z,1516656482.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:02.550Z,1516656482.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:02.945Z,1516656482.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:03.348Z,1516656483.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:03.741Z,1516656483.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:04.153Z,1516656484.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:04.546Z,1516656484.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:04.952Z,1516656484.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:05.347Z,1516656485.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:05.748Z,1516656485.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:06.145Z,1516656486.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:06.548Z,1516656486.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:06.948Z,1516656486.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:07.348Z,1516656487.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:07.774Z,1516656487.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:11.008Z,1516656491.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:11.144Z,1516656491.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:11.516Z,1516656491.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:11.912Z,1516656491.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:12.312Z,1516656492.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:12.698Z,1516656492.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:13.131Z,1516656493.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:13.512Z,1516656493.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:13.917Z,1516656493.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:14.308Z,1516656494.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:14.700Z,1516656494.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:15.099Z,1516656495.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:15.504Z,1516656495.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:15.925Z,1516656495.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:16.307Z,1516656496.307 [PNI_TCM](ERROR): CRC does not match. Expected:0x41751 got:0x176
2018-01-22T21:28:16.336Z,1516656496.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:16.720Z,1516656496.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:17.097Z,1516656497.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:17.509Z,1516656497.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:17.920Z,1516656497.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:18.317Z,1516656498.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:18.717Z,1516656498.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:19.115Z,1516656499.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:19.513Z,1516656499.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:19.909Z,1516656499.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:20.328Z,1516656500.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:20.717Z,1516656500.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:21.113Z,1516656501.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:21.509Z,1516656501.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:21.924Z,1516656501.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:22.313Z,1516656502.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:22.684Z,1516656502.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:23.118Z,1516656503.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:23.524Z,1516656503.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:23.897Z,1516656503.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:24.314Z,1516656504.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:24.696Z,1516656504.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:25.134Z,1516656505.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:25.500Z,1516656505.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:25.902Z,1516656505.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:26.307Z,1516656506.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:26.712Z,1516656506.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:27.107Z,1516656507.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:27.495Z,1516656507.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:27.901Z,1516656507.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:28.299Z,1516656508.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:28.696Z,1516656508.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:29.112Z,1516656509.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:29.513Z,1516656509.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:29.944Z,1516656509.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:30.301Z,1516656510.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:30.705Z,1516656510.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:31.084Z,1516656511.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:31.484Z,1516656511.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:31.888Z,1516656511.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:32.298Z,1516656512.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:32.722Z,1516656512.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:33.119Z,1516656513.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:33.496Z,1516656513.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:33.890Z,1516656513.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:34.305Z,1516656514.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:34.696Z,1516656514.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:35.098Z,1516656515.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:35.498Z,1516656515.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:35.928Z,1516656515.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:36.300Z,1516656516.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:36.691Z,1516656516.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:37.094Z,1516656517.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:37.493Z,1516656517.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:37.896Z,1516656517.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:38.305Z,1516656518.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:38.706Z,1516656518.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:39.104Z,1516656519.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:39.495Z,1516656519.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:39.892Z,1516656519.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:40.292Z,1516656520.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:40.704Z,1516656520.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:41.106Z,1516656521.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:41.507Z,1516656521.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:41.906Z,1516656521.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:42.296Z,1516656522.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:42.702Z,1516656522.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:43.104Z,1516656523.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:43.500Z,1516656523.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:43.906Z,1516656523.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:44.320Z,1516656524.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:44.710Z,1516656524.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:45.098Z,1516656525.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:45.496Z,1516656525.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:45.898Z,1516656525.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:46.296Z,1516656526.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:46.704Z,1516656526.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:47.104Z,1516656527.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:47.504Z,1516656527.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:47.904Z,1516656527.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:48.291Z,1516656528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:48.700Z,1516656528.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:49.094Z,1516656529.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:49.501Z,1516656529.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:49.896Z,1516656529.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:50.306Z,1516656530.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:50.705Z,1516656530.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:51.103Z,1516656531.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:51.498Z,1516656531.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:51.892Z,1516656531.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:52.292Z,1516656532.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:52.700Z,1516656532.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:53.112Z,1516656533.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:53.506Z,1516656533.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:53.905Z,1516656533.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:54.296Z,1516656534.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:54.696Z,1516656534.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:55.100Z,1516656535.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:55.493Z,1516656535.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:55.892Z,1516656535.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:56.311Z,1516656536.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:56.706Z,1516656536.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:57.116Z,1516656537.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:57.508Z,1516656537.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:57.921Z,1516656537.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:58.302Z,1516656538.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:58.704Z,1516656538.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:59.112Z,1516656539.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:59.508Z,1516656539.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:28:59.908Z,1516656539.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:00.304Z,1516656540.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:00.701Z,1516656540.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:01.086Z,1516656541.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:01.489Z,1516656541.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:01.889Z,1516656541.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:02.312Z,1516656542.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:02.719Z,1516656542.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:03.098Z,1516656543.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:03.500Z,1516656543.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:03.896Z,1516656543.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:04.296Z,1516656544.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:04.698Z,1516656544.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:05.103Z,1516656545.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:05.524Z,1516656545.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:05.906Z,1516656545.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:06.300Z,1516656546.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:06.696Z,1516656546.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:07.100Z,1516656547.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:07.493Z,1516656547.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:07.893Z,1516656547.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:11.241Z,1516656551.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:11.384Z,1516656551.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:11.714Z,1516656551.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:12.112Z,1516656552.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:12.515Z,1516656552.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:12.907Z,1516656552.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:13.314Z,1516656553.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:13.714Z,1516656553.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:14.114Z,1516656554.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:14.516Z,1516656554.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:14.913Z,1516656554.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:15.317Z,1516656555.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:15.716Z,1516656555.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:16.184Z,1516656556.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:16.521Z,1516656556.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:16.926Z,1516656556.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:17.316Z,1516656557.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:17.720Z,1516656557.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:18.124Z,1516656558.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:18.501Z,1516656558.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:18.904Z,1516656558.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:19.326Z,1516656559.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:19.733Z,1516656559.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:20.110Z,1516656560.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:20.510Z,1516656560.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:20.909Z,1516656560.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:21.308Z,1516656561.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:21.708Z,1516656561.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:22.120Z,1516656562.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:22.520Z,1516656562.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:22.917Z,1516656562.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:23.308Z,1516656563.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:23.706Z,1516656563.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:24.112Z,1516656564.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:24.521Z,1516656564.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:24.914Z,1516656564.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:25.321Z,1516656565.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:25.720Z,1516656565.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:26.128Z,1516656566.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:26.520Z,1516656566.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:26.912Z,1516656566.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:27.324Z,1516656567.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:27.724Z,1516656567.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:28.128Z,1516656568.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:28.525Z,1516656568.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:28.936Z,1516656568.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:29.305Z,1516656569.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:29.705Z,1516656569.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:30.108Z,1516656570.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:30.511Z,1516656570.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:30.907Z,1516656570.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:31.314Z,1516656571.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:31.714Z,1516656571.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:32.126Z,1516656572.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:32.508Z,1516656572.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:32.908Z,1516656572.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:33.316Z,1516656573.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:33.710Z,1516656573.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:34.122Z,1516656574.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:34.524Z,1516656574.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:34.921Z,1516656574.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:35.308Z,1516656575.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:35.712Z,1516656575.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:36.110Z,1516656576.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:36.512Z,1516656576.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:36.912Z,1516656576.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:37.321Z,1516656577.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:37.721Z,1516656577.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:38.132Z,1516656578.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:38.520Z,1516656578.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:38.912Z,1516656578.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:39.320Z,1516656579.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:39.700Z,1516656579.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:40.142Z,1516656580.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:40.526Z,1516656580.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:40.931Z,1516656580.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:41.323Z,1516656581.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:41.704Z,1516656581.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:42.100Z,1516656582.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:42.512Z,1516656582.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:42.906Z,1516656582.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:43.321Z,1516656583.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:43.720Z,1516656583.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:44.124Z,1516656584.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:44.520Z,1516656584.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:44.917Z,1516656584.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:45.317Z,1516656585.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:45.712Z,1516656585.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:46.128Z,1516656586.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:46.522Z,1516656586.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:46.936Z,1516656586.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:47.304Z,1516656587.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:47.439Z,1516656587.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:47.708Z,1516656587.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:48.112Z,1516656588.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:48.235Z,1516656588.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:48.512Z,1516656588.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:48.639Z,1516656588.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:48.902Z,1516656588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:49.314Z,1516656589.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:49.435Z,1516656589.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:49.735Z,1516656589.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:50.137Z,1516656590.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:50.231Z,1516656590.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:50.516Z,1516656590.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:50.635Z,1516656590.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:50.912Z,1516656590.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:51.312Z,1516656591.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:51.432Z,1516656591.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:51.715Z,1516656591.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:52.115Z,1516656592.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:52.227Z,1516656592.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:52.516Z,1516656592.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:52.631Z,1516656592.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:29:52.928Z,1516656592.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:53.308Z,1516656593.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:53.717Z,1516656593.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:54.116Z,1516656594.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:54.516Z,1516656594.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:54.920Z,1516656594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:55.321Z,1516656595.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:55.724Z,1516656595.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:56.121Z,1516656596.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:56.512Z,1516656596.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:56.910Z,1516656596.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:57.314Z,1516656597.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:57.720Z,1516656597.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:58.129Z,1516656598.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:58.523Z,1516656598.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:58.928Z,1516656598.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:59.319Z,1516656599.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:29:59.720Z,1516656599.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:00.121Z,1516656600.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:00.500Z,1516656600.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:00.924Z,1516656600.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:01.329Z,1516656601.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:01.732Z,1516656601.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:02.136Z,1516656602.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:02.525Z,1516656602.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:02.905Z,1516656602.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:03.304Z,1516656603.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:03.708Z,1516656603.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:04.116Z,1516656604.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:04.517Z,1516656604.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:04.922Z,1516656604.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:05.308Z,1516656605.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:05.439Z,1516656605.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:05.706Z,1516656605.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:06.111Z,1516656606.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:06.235Z,1516656606.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:06.520Z,1516656606.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:06.639Z,1516656606.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:06.912Z,1516656606.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:07.320Z,1516656607.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:07.435Z,1516656607.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:07.716Z,1516656607.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:08.128Z,1516656608.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:08.231Z,1516656608.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:08.635Z,1516656608.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:11.366Z,1516656611.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:11.479Z,1516656611.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:11.502Z,1516656611.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:11.851Z,1516656611.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:12.275Z,1516656612.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:12.329Z,1516656612.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:12.639Z,1516656612.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:12.683Z,1516656612.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:13.041Z,1516656613.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:13.432Z,1516656613.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:13.479Z,1516656613.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:13.840Z,1516656613.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:14.253Z,1516656614.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:14.275Z,1516656614.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:14.655Z,1516656614.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:14.679Z,1516656614.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:15.047Z,1516656615.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:15.441Z,1516656615.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:15.484Z,1516656615.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:15.844Z,1516656615.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:16.249Z,1516656616.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:16.279Z,1516656616.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:16.643Z,1516656616.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:16.683Z,1516656616.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:17.024Z,1516656617.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:17.450Z,1516656617.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:17.480Z,1516656617.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:17.851Z,1516656617.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:18.262Z,1516656618.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:18.275Z,1516656618.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:18.631Z,1516656618.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:18.679Z,1516656618.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:19.040Z,1516656619.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:19.435Z,1516656619.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:19.475Z,1516656619.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:19.832Z,1516656619.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:20.253Z,1516656620.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:20.279Z,1516656620.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:20.649Z,1516656620.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:20.683Z,1516656620.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:21.046Z,1516656621.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:21.441Z,1516656621.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:21.479Z,1516656621.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:21.844Z,1516656621.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:22.245Z,1516656622.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:22.275Z,1516656622.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:22.624Z,1516656622.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:22.679Z,1516656622.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:23.024Z,1516656623.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:23.456Z,1516656623.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:23.852Z,1516656623.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:24.323Z,1516656624.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:24.638Z,1516656624.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:25.029Z,1516656625.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:25.431Z,1516656625.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:25.527Z,1516656625.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:25.836Z,1516656625.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:26.294Z,1516656626.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:26.324Z,1516656626.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:26.650Z,1516656626.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:26.731Z,1516656626.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:27.044Z,1516656627.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:27.436Z,1516656627.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:27.527Z,1516656627.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:27.836Z,1516656627.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:28.240Z,1516656628.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:28.323Z,1516656628.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:28.640Z,1516656628.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:28.727Z,1516656628.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:29.040Z,1516656629.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:29.446Z,1516656629.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:29.524Z,1516656629.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:29.856Z,1516656629.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:30.257Z,1516656630.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:30.319Z,1516656630.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:30.644Z,1516656630.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:30.723Z,1516656630.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:31.028Z,1516656631.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:31.433Z,1516656631.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:31.519Z,1516656631.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:31.831Z,1516656631.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:32.234Z,1516656632.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:32.315Z,1516656632.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:32.647Z,1516656632.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:32.719Z,1516656632.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:33.042Z,1516656633.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:33.430Z,1516656633.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:33.515Z,1516656633.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:33.836Z,1516656633.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:34.235Z,1516656634.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:34.311Z,1516656634.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:34.644Z,1516656634.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:34.715Z,1516656634.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:35.193Z,1516656635.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:35.445Z,1516656635.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:35.511Z,1516656635.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:35.849Z,1516656635.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:36.246Z,1516656636.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:36.307Z,1516656636.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:36.632Z,1516656636.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:36.711Z,1516656636.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:37.044Z,1516656637.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:37.425Z,1516656637.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:37.507Z,1516656637.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:37.832Z,1516656637.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:38.238Z,1516656638.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:38.305Z,1516656638.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:38.649Z,1516656638.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:38.739Z,1516656638.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:39.046Z,1516656639.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:39.442Z,1516656639.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:39.535Z,1516656639.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:39.852Z,1516656639.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:40.235Z,1516656640.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:40.331Z,1516656640.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:40.632Z,1516656640.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:40.739Z,1516656640.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:41.036Z,1516656641.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:41.438Z,1516656641.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:41.535Z,1516656641.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:41.837Z,1516656641.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:42.238Z,1516656642.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:42.331Z,1516656642.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:42.635Z,1516656642.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:42.735Z,1516656642.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:43.033Z,1516656643.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:43.445Z,1516656643.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:43.531Z,1516656643.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:43.839Z,1516656643.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:44.243Z,1516656644.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:44.327Z,1516656644.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:44.645Z,1516656644.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:44.731Z,1516656644.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:45.045Z,1516656645.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:45.439Z,1516656645.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:45.527Z,1516656645.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:45.833Z,1516656645.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:46.244Z,1516656646.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:46.323Z,1516656646.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:46.645Z,1516656646.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:46.727Z,1516656646.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:47.046Z,1516656647.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:47.457Z,1516656647.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:47.524Z,1516656647.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:47.856Z,1516656647.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:48.256Z,1516656648.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:48.319Z,1516656648.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:48.644Z,1516656648.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:48.723Z,1516656648.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:49.054Z,1516656649.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:49.452Z,1516656649.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:49.519Z,1516656649.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:49.848Z,1516656649.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:50.256Z,1516656650.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:50.315Z,1516656650.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:50.655Z,1516656650.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:50.719Z,1516656650.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:51.066Z,1516656651.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:51.432Z,1516656651.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:51.515Z,1516656651.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:51.832Z,1516656651.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:52.232Z,1516656652.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:52.313Z,1516656652.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:52.641Z,1516656652.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:52.755Z,1516656652.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:53.040Z,1516656653.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:53.445Z,1516656653.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:53.446Z,1516656653.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-01-22T21:30:53.446Z,1516656653.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:30:53.448Z,1516656653.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:53.448Z,1516656653.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-01-22T21:30:53.448Z,1516656653.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:30:53.450Z,1516656653.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:53.450Z,1516656653.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-01-22T21:30:53.450Z,1516656653.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:30:53.462Z,1516656653.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:30:53.462Z,1516656653.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:30:53.463Z,1516656653.463 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:30:53.552Z,1516656653.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:53.863Z,1516656653.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:30:53.863Z,1516656653.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-01-22T21:30:53.864Z,1516656653.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:30:53.864Z,1516656653.864 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-01-22T21:30:53.864Z,1516656653.864 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:30:53.864Z,1516656653.864 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-01-22T21:30:54.248Z,1516656654.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:30:54.249Z,1516656654.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:30:54.249Z,1516656654.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:30:54.249Z,1516656654.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:30:54.250Z,1516656654.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:30:54.250Z,1516656654.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:30:54.251Z,1516656654.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:30:54.251Z,1516656654.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:30:54.251Z,1516656654.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:30:54.348Z,1516656654.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:54.632Z,1516656654.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:54.763Z,1516656654.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:55.030Z,1516656655.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:55.441Z,1516656655.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:55.559Z,1516656655.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:55.830Z,1516656655.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:56.246Z,1516656656.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:56.355Z,1516656656.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:56.644Z,1516656656.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:56.759Z,1516656656.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:57.043Z,1516656657.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:57.440Z,1516656657.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:57.559Z,1516656657.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:57.834Z,1516656657.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:58.236Z,1516656658.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:58.358Z,1516656658.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:58.633Z,1516656658.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:58.763Z,1516656658.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:59.036Z,1516656659.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:59.453Z,1516656659.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:30:59.562Z,1516656659.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:30:59.848Z,1516656659.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:00.248Z,1516656660.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:00.362Z,1516656660.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:00.632Z,1516656660.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:00.767Z,1516656660.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:01.023Z,1516656661.023 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:31:01.023Z,1516656661.023 [BPC1] Communications Fault, FailCount= 6
2018-01-22T21:31:01.023Z,1516656661.023 [BPC1](ERROR): Communications Fault
2018-01-22T21:31:01.044Z,1516656661.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:01.082Z,1516656661.082 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:31:01.440Z,1516656661.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:01.563Z,1516656661.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:01.837Z,1516656661.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:02.241Z,1516656662.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:02.255Z,1516656662.255 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:31:02.255Z,1516656662.255 [BPC1] No Fault, FailCount= 6
2018-01-22T21:31:02.359Z,1516656662.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:02.704Z,1516656662.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:02.763Z,1516656662.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:03.045Z,1516656663.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:03.437Z,1516656663.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:03.559Z,1516656663.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:03.850Z,1516656663.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:04.238Z,1516656664.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:04.355Z,1516656664.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:04.640Z,1516656664.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:04.759Z,1516656664.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:05.039Z,1516656665.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:05.444Z,1516656665.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:05.555Z,1516656665.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:05.849Z,1516656665.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:06.246Z,1516656666.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:06.352Z,1516656666.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:06.658Z,1516656666.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:06.763Z,1516656666.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:07.027Z,1516656667.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:07.432Z,1516656667.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:07.559Z,1516656667.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:07.836Z,1516656667.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:08.257Z,1516656668.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:08.356Z,1516656668.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:08.771Z,1516656668.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:09.567Z,1516656669.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:10.363Z,1516656670.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:10.767Z,1516656670.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:11.485Z,1516656671.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:11.563Z,1516656671.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:11.628Z,1516656671.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:11.948Z,1516656671.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:12.356Z,1516656672.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:12.359Z,1516656672.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:12.752Z,1516656672.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:12.763Z,1516656672.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:13.161Z,1516656673.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:13.559Z,1516656673.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:13.572Z,1516656673.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:14.021Z,1516656674.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:14.355Z,1516656674.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:14.367Z,1516656674.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:14.759Z,1516656674.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:14.761Z,1516656674.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:15.160Z,1516656675.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:15.555Z,1516656675.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:15.567Z,1516656675.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:15.996Z,1516656675.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:16.351Z,1516656676.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:16.366Z,1516656676.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:16.755Z,1516656676.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:16.766Z,1516656676.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:17.177Z,1516656677.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:17.551Z,1516656677.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:17.553Z,1516656677.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:17.967Z,1516656677.967 [BPC1](INFO): Initialized
2018-01-22T21:31:17.984Z,1516656677.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:18.347Z,1516656678.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:18.358Z,1516656678.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:18.751Z,1516656678.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:18.758Z,1516656678.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:19.161Z,1516656679.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:19.547Z,1516656679.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:19.580Z,1516656679.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:19.968Z,1516656679.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:20.345Z,1516656680.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:20.416Z,1516656680.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:20.756Z,1516656680.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:20.835Z,1516656680.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:21.152Z,1516656681.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:21.549Z,1516656681.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:21.631Z,1516656681.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:21.947Z,1516656681.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:22.427Z,1516656682.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:22.430Z,1516656682.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:22.758Z,1516656682.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:22.831Z,1516656682.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:23.158Z,1516656683.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:23.548Z,1516656683.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:23.627Z,1516656683.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:23.951Z,1516656683.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:24.347Z,1516656684.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:24.423Z,1516656684.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:24.758Z,1516656684.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:24.827Z,1516656684.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:25.152Z,1516656685.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:25.558Z,1516656685.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:25.623Z,1516656685.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:25.958Z,1516656685.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:26.368Z,1516656686.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:26.419Z,1516656686.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:26.760Z,1516656686.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:26.823Z,1516656686.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:27.153Z,1516656687.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:27.553Z,1516656687.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:27.619Z,1516656687.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:27.956Z,1516656687.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:28.368Z,1516656688.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:28.415Z,1516656688.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:28.765Z,1516656688.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:28.819Z,1516656688.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:29.172Z,1516656689.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:29.560Z,1516656689.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:29.615Z,1516656689.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:29.958Z,1516656689.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:30.364Z,1516656690.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:30.411Z,1516656690.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:30.760Z,1516656690.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:30.815Z,1516656690.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:31.168Z,1516656691.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:31.576Z,1516656691.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:31.611Z,1516656691.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:31.968Z,1516656691.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:32.372Z,1516656692.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:32.407Z,1516656692.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:32.745Z,1516656692.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:32.811Z,1516656692.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:33.152Z,1516656693.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:33.549Z,1516656693.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:33.608Z,1516656693.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:33.949Z,1516656693.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:34.404Z,1516656694.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:34.430Z,1516656694.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:34.775Z,1516656694.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:34.835Z,1516656694.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:35.158Z,1516656695.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:35.560Z,1516656695.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:35.631Z,1516656695.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:35.956Z,1516656695.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:36.422Z,1516656696.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:36.427Z,1516656696.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:36.746Z,1516656696.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:36.839Z,1516656696.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:37.149Z,1516656697.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:37.575Z,1516656697.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:37.635Z,1516656697.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:37.975Z,1516656697.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:38.359Z,1516656698.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:38.431Z,1516656698.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:38.764Z,1516656698.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:38.835Z,1516656698.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:39.153Z,1516656699.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:39.554Z,1516656699.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:39.631Z,1516656699.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:39.964Z,1516656699.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:40.365Z,1516656700.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:40.427Z,1516656700.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:40.774Z,1516656700.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:40.831Z,1516656700.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:41.180Z,1516656701.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:41.560Z,1516656701.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:41.627Z,1516656701.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:41.969Z,1516656701.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:42.344Z,1516656702.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:42.423Z,1516656702.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:42.744Z,1516656702.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:42.827Z,1516656702.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:43.148Z,1516656703.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:43.576Z,1516656703.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:43.623Z,1516656703.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:43.974Z,1516656703.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:44.377Z,1516656704.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:44.419Z,1516656704.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:44.755Z,1516656704.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:44.823Z,1516656704.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:45.152Z,1516656705.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:45.558Z,1516656705.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:45.621Z,1516656705.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:45.947Z,1516656705.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:46.364Z,1516656706.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:46.415Z,1516656706.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:46.768Z,1516656706.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:46.819Z,1516656706.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:47.165Z,1516656707.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:47.554Z,1516656707.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:47.615Z,1516656707.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:47.960Z,1516656707.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:48.412Z,1516656708.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:48.416Z,1516656708.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:48.751Z,1516656708.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:48.855Z,1516656708.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:49.148Z,1516656709.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:49.578Z,1516656709.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:49.652Z,1516656709.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:49.978Z,1516656709.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:50.427Z,1516656710.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:50.447Z,1516656710.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:50.754Z,1516656710.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:50.859Z,1516656710.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:51.149Z,1516656711.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:51.561Z,1516656711.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:51.655Z,1516656711.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:51.952Z,1516656711.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:52.361Z,1516656712.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:52.451Z,1516656712.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:52.764Z,1516656712.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:52.855Z,1516656712.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:53.165Z,1516656713.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:53.557Z,1516656713.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:53.651Z,1516656713.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:53.965Z,1516656713.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:54.376Z,1516656714.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:54.455Z,1516656714.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:54.764Z,1516656714.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:54.859Z,1516656714.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:55.164Z,1516656715.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:55.582Z,1516656715.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:55.655Z,1516656715.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:55.984Z,1516656715.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:56.391Z,1516656716.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:56.451Z,1516656716.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:56.765Z,1516656716.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:56.855Z,1516656716.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:57.160Z,1516656717.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:57.579Z,1516656717.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:57.652Z,1516656717.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:57.968Z,1516656717.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:58.384Z,1516656718.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:58.447Z,1516656718.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:58.797Z,1516656718.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:58.851Z,1516656718.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:59.188Z,1516656719.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:59.556Z,1516656719.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:31:59.648Z,1516656719.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:31:59.981Z,1516656719.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:00.382Z,1516656720.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:00.443Z,1516656720.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:00.758Z,1516656720.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:01.154Z,1516656721.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:01.239Z,1516656721.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:01.585Z,1516656721.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:01.958Z,1516656721.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:02.035Z,1516656722.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:02.358Z,1516656722.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:02.759Z,1516656722.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:02.831Z,1516656722.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:03.152Z,1516656723.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:03.548Z,1516656723.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:03.627Z,1516656723.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:03.949Z,1516656723.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:04.358Z,1516656724.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:04.427Z,1516656724.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:04.757Z,1516656724.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:05.157Z,1516656725.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:05.223Z,1516656725.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:05.552Z,1516656725.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:05.952Z,1516656725.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:06.019Z,1516656726.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:06.470Z,1516656726.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:06.743Z,1516656726.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:06.768Z,1516656726.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:07.147Z,1516656727.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:07.153Z,1516656727.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:07.551Z,1516656727.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:07.587Z,1516656727.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:07.599Z,1516656727.599 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T21:27:07.3Z
2018-01-22T21:32:07.599Z,1516656727.599 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:32:07.599Z,1516656727.599 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T21:32:07.955Z,1516656727.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:07.984Z,1516656727.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:08.551Z,1516656728.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:08.932Z,1516656728.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:09.347Z,1516656729.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:10.143Z,1516656730.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:10.579Z,1516656730.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:11.375Z,1516656731.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:12.171Z,1516656732.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:12.575Z,1516656732.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:12.985Z,1516656732.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:13.088Z,1516656733.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:13.371Z,1516656733.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:13.481Z,1516656733.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:13.862Z,1516656733.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:14.169Z,1516656734.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:14.282Z,1516656734.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:14.575Z,1516656734.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:14.658Z,1516656734.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:15.371Z,1516656735.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:16.167Z,1516656736.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:16.867Z,1516656736.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:17.663Z,1516656737.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:17.892Z,1516656737.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:17.968Z,1516656737.968 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0076.lzma
2018-01-22T21:32:18.021Z,1516656738.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:18.368Z,1516656738.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:18.461Z,1516656738.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:18.717Z,1516656738.717 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0076.lzma.bak
2018-01-22T21:32:18.717Z,1516656738.717 [DataOverHttps](INFO): SBD MOMSN=7751933
2018-01-22T21:32:18.791Z,1516656738.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:18.883Z,1516656738.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:19.376Z,1516656739.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:19.565Z,1516656739.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:19.679Z,1516656739.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:20.475Z,1516656740.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:20.879Z,1516656740.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:21.676Z,1516656741.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:22.471Z,1516656742.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:22.867Z,1516656742.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:22.875Z,1516656742.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:23.011Z,1516656743.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:23.341Z,1516656743.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:23.671Z,1516656743.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:23.749Z,1516656743.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:24.183Z,1516656744.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:24.467Z,1516656744.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:24.548Z,1516656744.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:24.871Z,1516656744.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:25.667Z,1516656745.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:26.463Z,1516656746.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:26.867Z,1516656746.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:27.663Z,1516656747.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:27.773Z,1516656747.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:27.841Z,1516656747.841 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0077.lzma
2018-01-22T21:32:27.893Z,1516656747.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:28.274Z,1516656748.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:28.459Z,1516656748.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:28.612Z,1516656748.612 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0077.lzma.bak
2018-01-22T21:32:28.613Z,1516656748.613 [DataOverHttps](INFO): SBD MOMSN=7751935
2018-01-22T21:32:28.687Z,1516656748.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:28.863Z,1516656748.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:29.276Z,1516656749.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:29.279Z,1516656749.279 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T21:32:29.280Z,1516656749.280 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T21:32:29.280Z,1516656749.280 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T21:32:29.463Z,1516656749.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:29.659Z,1516656749.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:30.461Z,1516656750.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:30.903Z,1516656750.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:31.699Z,1516656751.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:32.495Z,1516656752.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:32.776Z,1516656752.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:32.904Z,1516656752.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:32.915Z,1516656752.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:33.246Z,1516656753.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:33.645Z,1516656753.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:33.711Z,1516656753.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:34.046Z,1516656754.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:34.445Z,1516656754.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:34.507Z,1516656754.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:34.850Z,1516656754.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:34.911Z,1516656754.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:35.244Z,1516656755.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:35.652Z,1516656755.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:35.707Z,1516656755.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:36.052Z,1516656756.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:36.448Z,1516656756.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:36.503Z,1516656756.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:36.844Z,1516656756.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:36.907Z,1516656756.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:37.250Z,1516656757.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:37.648Z,1516656757.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:37.703Z,1516656757.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:38.040Z,1516656758.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:38.459Z,1516656758.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:38.499Z,1516656758.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:38.860Z,1516656758.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:38.903Z,1516656758.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:39.255Z,1516656759.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:39.658Z,1516656759.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:39.699Z,1516656759.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:40.031Z,1516656760.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:40.443Z,1516656760.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:40.495Z,1516656760.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:40.913Z,1516656760.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:40.925Z,1516656760.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:41.236Z,1516656761.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:41.654Z,1516656761.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:41.707Z,1516656761.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:42.052Z,1516656762.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:42.449Z,1516656762.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:42.503Z,1516656762.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:42.848Z,1516656762.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:42.907Z,1516656762.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:43.249Z,1516656763.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:43.652Z,1516656763.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:43.703Z,1516656763.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:44.046Z,1516656764.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:44.501Z,1516656764.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:44.566Z,1516656764.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:44.858Z,1516656764.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:44.935Z,1516656764.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:45.258Z,1516656765.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:45.634Z,1516656765.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:45.731Z,1516656765.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:46.040Z,1516656766.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:46.481Z,1516656766.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:46.527Z,1516656766.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:46.842Z,1516656766.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:46.947Z,1516656766.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:47.239Z,1516656767.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:47.649Z,1516656767.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:47.743Z,1516656767.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:48.060Z,1516656768.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:48.460Z,1516656768.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:48.540Z,1516656768.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:48.855Z,1516656768.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:48.943Z,1516656768.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:49.258Z,1516656769.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:49.636Z,1516656769.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:49.741Z,1516656769.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:50.058Z,1516656770.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:50.461Z,1516656770.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:50.535Z,1516656770.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:50.857Z,1516656770.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:50.939Z,1516656770.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:51.245Z,1516656771.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:51.634Z,1516656771.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:51.735Z,1516656771.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:52.044Z,1516656772.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:52.448Z,1516656772.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:52.531Z,1516656772.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:52.839Z,1516656772.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:52.935Z,1516656772.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:53.240Z,1516656773.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:53.652Z,1516656773.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:53.731Z,1516656773.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:54.056Z,1516656774.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:54.460Z,1516656774.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:54.527Z,1516656774.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:54.839Z,1516656774.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:54.931Z,1516656774.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:55.243Z,1516656775.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:55.644Z,1516656775.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:55.727Z,1516656775.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:56.039Z,1516656776.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:56.453Z,1516656776.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:56.523Z,1516656776.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:56.856Z,1516656776.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:56.927Z,1516656776.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:57.256Z,1516656777.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:57.646Z,1516656777.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:57.723Z,1516656777.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:58.044Z,1516656778.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:58.446Z,1516656778.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:58.521Z,1516656778.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:58.860Z,1516656778.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:58.947Z,1516656778.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:32:59.244Z,1516656779.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:59.656Z,1516656779.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:32:59.743Z,1516656779.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:00.064Z,1516656780.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:00.456Z,1516656780.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:00.539Z,1516656780.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:00.855Z,1516656780.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:00.971Z,1516656780.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:01.248Z,1516656781.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:01.638Z,1516656781.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:01.767Z,1516656781.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:02.039Z,1516656782.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:02.448Z,1516656782.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:02.563Z,1516656782.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:02.845Z,1516656782.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:02.967Z,1516656782.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:03.245Z,1516656783.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:03.640Z,1516656783.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:03.763Z,1516656783.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:04.040Z,1516656784.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:04.444Z,1516656784.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:04.559Z,1516656784.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:04.846Z,1516656784.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:04.963Z,1516656784.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:05.248Z,1516656785.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:05.647Z,1516656785.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:05.759Z,1516656785.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:06.076Z,1516656786.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:06.444Z,1516656786.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:06.557Z,1516656786.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:06.848Z,1516656786.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:06.965Z,1516656786.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:07.244Z,1516656787.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:07.645Z,1516656787.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:07.759Z,1516656787.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:08.040Z,1516656788.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:08.460Z,1516656788.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:08.555Z,1516656788.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:08.848Z,1516656788.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:08.959Z,1516656788.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:09.249Z,1516656789.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:09.644Z,1516656789.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:09.755Z,1516656789.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:10.040Z,1516656790.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:10.445Z,1516656790.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:10.551Z,1516656790.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:10.840Z,1516656790.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:10.955Z,1516656790.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:11.239Z,1516656791.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:11.653Z,1516656791.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:11.751Z,1516656791.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:12.063Z,1516656792.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:12.456Z,1516656792.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:12.548Z,1516656792.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:12.849Z,1516656792.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:12.971Z,1516656792.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:13.252Z,1516656793.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:13.649Z,1516656793.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:13.767Z,1516656793.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:14.049Z,1516656794.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:14.457Z,1516656794.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:14.563Z,1516656794.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:14.868Z,1516656794.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:14.967Z,1516656794.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:15.256Z,1516656795.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:15.652Z,1516656795.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:15.763Z,1516656795.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:16.032Z,1516656796.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:16.431Z,1516656796.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:16.559Z,1516656796.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:16.832Z,1516656796.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:16.963Z,1516656796.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:17.240Z,1516656797.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:17.661Z,1516656797.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:17.759Z,1516656797.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:18.059Z,1516656798.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:18.442Z,1516656798.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:18.555Z,1516656798.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:18.837Z,1516656798.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:18.959Z,1516656798.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:19.240Z,1516656799.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:19.640Z,1516656799.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:19.756Z,1516656799.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:20.040Z,1516656800.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:20.446Z,1516656800.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:20.552Z,1516656800.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:20.866Z,1516656800.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:20.955Z,1516656800.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:21.252Z,1516656801.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:21.638Z,1516656801.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:21.751Z,1516656801.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:22.091Z,1516656802.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:22.437Z,1516656802.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:22.547Z,1516656802.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:22.843Z,1516656802.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:22.951Z,1516656802.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:23.239Z,1516656803.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:23.646Z,1516656803.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:23.747Z,1516656803.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:24.045Z,1516656804.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:24.448Z,1516656804.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:24.543Z,1516656804.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:24.846Z,1516656804.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:24.947Z,1516656804.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:25.255Z,1516656805.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:25.640Z,1516656805.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:25.743Z,1516656805.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:26.044Z,1516656806.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:26.453Z,1516656806.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:26.541Z,1516656806.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:26.864Z,1516656806.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:26.979Z,1516656806.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:27.262Z,1516656807.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:27.632Z,1516656807.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:27.775Z,1516656807.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:28.032Z,1516656808.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:28.436Z,1516656808.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:28.573Z,1516656808.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:28.862Z,1516656808.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:28.979Z,1516656808.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:29.260Z,1516656809.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:29.646Z,1516656809.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:29.776Z,1516656809.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:30.046Z,1516656810.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:30.571Z,1516656810.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:30.975Z,1516656810.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:31.771Z,1516656811.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:32.567Z,1516656812.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:32.971Z,1516656812.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:33.330Z,1516656813.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:33.463Z,1516656813.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:33.768Z,1516656813.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:33.793Z,1516656813.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:34.273Z,1516656814.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:34.566Z,1516656814.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:34.594Z,1516656814.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:34.972Z,1516656814.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:35.004Z,1516656815.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:35.402Z,1516656815.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:35.767Z,1516656815.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:35.802Z,1516656815.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:36.249Z,1516656816.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:36.563Z,1516656816.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:36.601Z,1516656816.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:36.968Z,1516656816.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:37.003Z,1516656817.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:37.416Z,1516656817.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:37.763Z,1516656817.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:37.811Z,1516656817.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:38.207Z,1516656818.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:38.559Z,1516656818.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:38.608Z,1516656818.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:38.964Z,1516656818.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:38.997Z,1516656818.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:39.412Z,1516656819.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:39.760Z,1516656819.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:39.816Z,1516656819.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:40.210Z,1516656820.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:40.556Z,1516656820.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:40.664Z,1516656820.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:40.990Z,1516656820.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:41.039Z,1516656821.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:41.414Z,1516656821.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:41.821Z,1516656821.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:41.835Z,1516656821.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:42.202Z,1516656822.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:42.631Z,1516656822.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:42.635Z,1516656822.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:42.998Z,1516656822.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:43.059Z,1516656823.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:43.407Z,1516656823.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:43.810Z,1516656823.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:43.855Z,1516656823.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:44.274Z,1516656824.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:44.604Z,1516656824.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:44.651Z,1516656824.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:45.008Z,1516656825.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:45.055Z,1516656825.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:45.411Z,1516656825.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:45.888Z,1516656825.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:45.947Z,1516656825.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:46.273Z,1516656826.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:46.596Z,1516656826.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:46.683Z,1516656826.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:47.004Z,1516656827.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:47.087Z,1516656827.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:47.422Z,1516656827.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:47.802Z,1516656827.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:47.883Z,1516656827.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:48.268Z,1516656828.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:48.598Z,1516656828.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:48.679Z,1516656828.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:48.000Z,1516656829.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:49.083Z,1516656829.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:49.404Z,1516656829.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:49.804Z,1516656829.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:49.879Z,1516656829.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:50.268Z,1516656830.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:50.611Z,1516656830.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:50.675Z,1516656830.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:51.017Z,1516656831.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:51.079Z,1516656831.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:51.388Z,1516656831.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:51.792Z,1516656831.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:51.875Z,1516656831.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:52.211Z,1516656832.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:52.616Z,1516656832.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:52.671Z,1516656832.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:53.008Z,1516656833.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:53.076Z,1516656833.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:53.409Z,1516656833.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:53.796Z,1516656833.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:53.871Z,1516656833.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:54.196Z,1516656834.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:54.644Z,1516656834.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:54.644Z,1516656834.644 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-01-22T21:33:54.644Z,1516656834.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:33:54.646Z,1516656834.646 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:54.646Z,1516656834.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-01-22T21:33:54.646Z,1516656834.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:33:54.656Z,1516656834.656 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:54.656Z,1516656834.656 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-01-22T21:33:54.656Z,1516656834.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:33:54.667Z,1516656834.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:54.691Z,1516656834.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:33:54.691Z,1516656834.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:33:54.692Z,1516656834.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:33:55.023Z,1516656835.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:33:55.023Z,1516656835.023 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-01-22T21:33:55.023Z,1516656835.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:33:55.023Z,1516656835.023 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-01-22T21:33:55.024Z,1516656835.024 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:33:55.024Z,1516656835.024 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-01-22T21:33:55.075Z,1516656835.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:55.401Z,1516656835.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:33:55.401Z,1516656835.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:33:55.401Z,1516656835.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:33:55.402Z,1516656835.402 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:33:55.402Z,1516656835.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:33:55.403Z,1516656835.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:33:55.403Z,1516656835.403 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:33:55.404Z,1516656835.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:33:55.404Z,1516656835.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:33:55.812Z,1516656835.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:55.872Z,1516656835.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:56.212Z,1516656836.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:56.665Z,1516656836.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:56.667Z,1516656836.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:57.006Z,1516656837.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:57.071Z,1516656837.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:57.409Z,1516656837.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:57.809Z,1516656837.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:57.867Z,1516656837.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:58.264Z,1516656838.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:58.597Z,1516656838.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:58.663Z,1516656838.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:59.005Z,1516656839.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:59.067Z,1516656839.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:33:59.402Z,1516656839.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:59.820Z,1516656839.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:33:59.863Z,1516656839.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:00.268Z,1516656840.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:00.619Z,1516656840.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:00.659Z,1516656840.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:00.996Z,1516656840.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:01.063Z,1516656841.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:01.396Z,1516656841.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:01.797Z,1516656841.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:01.859Z,1516656841.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:02.197Z,1516656842.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:02.556Z,1516656842.556 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T21:34:02.557Z,1516656842.557 [NAL9602] Data Fault, FailCount= 4
2018-01-22T21:34:02.557Z,1516656842.557 [NAL9602](ERROR): Data Fault
2018-01-22T21:34:02.607Z,1516656842.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:02.629Z,1516656842.629 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T21:34:02.655Z,1516656842.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:02.956Z,1516656842.956 [NAL9602](INFO): Powering down
2018-01-22T21:34:03.007Z,1516656843.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:03.059Z,1516656843.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:03.395Z,1516656843.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:03.795Z,1516656843.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:03.809Z,1516656843.809 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T21:34:03.809Z,1516656843.809 [NAL9602] No Fault, FailCount= 4
2018-01-22T21:34:03.855Z,1516656843.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:04.197Z,1516656844.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:04.612Z,1516656844.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:04.651Z,1516656844.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:05.008Z,1516656845.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:05.055Z,1516656845.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:05.392Z,1516656845.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:05.792Z,1516656845.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:05.851Z,1516656845.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:06.196Z,1516656846.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:06.592Z,1516656846.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:06.647Z,1516656846.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:06.992Z,1516656846.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:07.052Z,1516656847.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:07.396Z,1516656847.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:07.796Z,1516656847.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:07.848Z,1516656847.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:08.200Z,1516656848.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:08.643Z,1516656848.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:08.654Z,1516656848.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:08.995Z,1516656848.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:09.083Z,1516656849.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:09.396Z,1516656849.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:09.795Z,1516656849.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:09.879Z,1516656849.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:10.203Z,1516656850.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:10.664Z,1516656850.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:10.676Z,1516656850.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:11.012Z,1516656851.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:11.079Z,1516656851.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:11.392Z,1516656851.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:11.792Z,1516656851.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:11.875Z,1516656851.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:12.192Z,1516656852.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:12.598Z,1516656852.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:12.671Z,1516656852.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:12.996Z,1516656852.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:13.075Z,1516656853.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:13.395Z,1516656853.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:13.803Z,1516656853.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:13.871Z,1516656853.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:14.196Z,1516656854.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:14.602Z,1516656854.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:14.667Z,1516656854.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:15.012Z,1516656855.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:15.071Z,1516656855.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:15.400Z,1516656855.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:15.800Z,1516656855.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:15.867Z,1516656855.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:16.197Z,1516656856.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:16.612Z,1516656856.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:16.663Z,1516656856.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:17.009Z,1516656857.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:17.067Z,1516656857.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:17.412Z,1516656857.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:17.792Z,1516656857.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:17.864Z,1516656857.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:18.196Z,1516656858.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:18.601Z,1516656858.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:18.659Z,1516656858.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:18.993Z,1516656858.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:19.063Z,1516656859.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:19.398Z,1516656859.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:19.793Z,1516656859.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:19.859Z,1516656859.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:20.204Z,1516656860.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:20.600Z,1516656860.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:20.655Z,1516656860.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:21.005Z,1516656861.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:21.059Z,1516656861.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:21.395Z,1516656861.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:21.804Z,1516656861.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:21.855Z,1516656861.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:22.195Z,1516656862.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:22.647Z,1516656862.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:22.652Z,1516656862.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:23.001Z,1516656863.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:23.095Z,1516656863.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:23.403Z,1516656863.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:23.805Z,1516656863.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:23.891Z,1516656863.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:24.195Z,1516656864.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:24.644Z,1516656864.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:24.687Z,1516656864.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:24.994Z,1516656864.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:25.095Z,1516656865.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:25.399Z,1516656865.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:25.794Z,1516656865.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:25.891Z,1516656865.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:26.200Z,1516656866.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:26.608Z,1516656866.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:26.687Z,1516656866.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:27.005Z,1516656867.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:27.091Z,1516656867.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:27.394Z,1516656867.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:27.793Z,1516656867.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:27.887Z,1516656867.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:28.197Z,1516656868.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:28.602Z,1516656868.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:28.683Z,1516656868.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:29.003Z,1516656869.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:29.087Z,1516656869.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:29.405Z,1516656869.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:29.797Z,1516656869.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:29.883Z,1516656869.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:30.205Z,1516656870.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:30.679Z,1516656870.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:31.083Z,1516656871.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:31.879Z,1516656871.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:32.675Z,1516656872.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:33.079Z,1516656873.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:33.448Z,1516656873.448 [NAL9602](INFO): Powering up NAL9602
2018-01-22T21:34:33.492Z,1516656873.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:33.616Z,1516656873.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:33.875Z,1516656873.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:33.963Z,1516656873.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:34.444Z,1516656874.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:34.671Z,1516656874.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:34.759Z,1516656874.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:35.075Z,1516656875.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:35.151Z,1516656875.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:35.556Z,1516656875.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:35.871Z,1516656875.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:35.956Z,1516656875.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:36.351Z,1516656876.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:36.669Z,1516656876.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:36.784Z,1516656876.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:37.079Z,1516656877.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:37.157Z,1516656877.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:37.560Z,1516656877.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:37.875Z,1516656877.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:37.960Z,1516656877.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:38.360Z,1516656878.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:38.673Z,1516656878.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:38.783Z,1516656878.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:39.079Z,1516656879.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:39.160Z,1516656879.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:39.589Z,1516656879.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:39.875Z,1516656879.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:39.963Z,1516656879.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:40.390Z,1516656880.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:40.673Z,1516656880.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:40.772Z,1516656880.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:41.079Z,1516656881.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:41.169Z,1516656881.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:41.563Z,1516656881.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:41.875Z,1516656881.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:41.959Z,1516656881.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:42.395Z,1516656882.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:42.671Z,1516656882.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:42.768Z,1516656882.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:43.075Z,1516656883.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:43.160Z,1516656883.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:43.562Z,1516656883.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:43.871Z,1516656883.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:43.974Z,1516656883.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:44.330Z,1516656884.330 [NAL9602](INFO): NAL9602 initialized
2018-01-22T21:34:44.396Z,1516656884.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:44.667Z,1516656884.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:44.768Z,1516656884.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:45.071Z,1516656885.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:45.174Z,1516656885.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:45.574Z,1516656885.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:45.867Z,1516656885.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:45.974Z,1516656885.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:46.409Z,1516656886.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:46.663Z,1516656886.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:46.777Z,1516656886.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:47.067Z,1516656887.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:47.170Z,1516656887.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:47.572Z,1516656887.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:47.863Z,1516656887.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:47.978Z,1516656887.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:48.425Z,1516656888.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:48.659Z,1516656888.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:48.780Z,1516656888.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:49.063Z,1516656889.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:49.152Z,1516656889.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:49.556Z,1516656889.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:49.861Z,1516656889.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:49.953Z,1516656889.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:50.353Z,1516656890.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:50.657Z,1516656890.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:50.784Z,1516656890.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:51.099Z,1516656891.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:51.186Z,1516656891.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:51.579Z,1516656891.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:51.895Z,1516656891.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:51.979Z,1516656891.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:52.356Z,1516656892.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:52.695Z,1516656892.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:52.765Z,1516656892.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:53.099Z,1516656893.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:53.165Z,1516656893.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:53.571Z,1516656893.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:53.895Z,1516656893.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:53.975Z,1516656893.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:54.412Z,1516656894.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:54.691Z,1516656894.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:54.779Z,1516656894.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:55.095Z,1516656895.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:55.172Z,1516656895.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:55.563Z,1516656895.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:55.891Z,1516656895.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:55.984Z,1516656895.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:56.412Z,1516656896.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:56.687Z,1516656896.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:56.781Z,1516656896.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:57.091Z,1516656897.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:57.174Z,1516656897.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:57.575Z,1516656897.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:57.887Z,1516656897.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:58.026Z,1516656898.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:58.418Z,1516656898.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:58.683Z,1516656898.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:58.782Z,1516656898.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:59.087Z,1516656899.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:59.191Z,1516656899.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:59.577Z,1516656899.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:34:59.884Z,1516656899.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:34:59.986Z,1516656899.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:00.415Z,1516656900.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:00.679Z,1516656900.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:00.773Z,1516656900.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:01.083Z,1516656901.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:01.174Z,1516656901.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:01.572Z,1516656901.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:01.879Z,1516656901.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:01.977Z,1516656901.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:02.436Z,1516656902.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:02.677Z,1516656902.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:02.789Z,1516656902.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:03.083Z,1516656903.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:03.165Z,1516656903.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:03.564Z,1516656903.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:03.881Z,1516656903.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:03.970Z,1516656903.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:04.376Z,1516656904.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:04.677Z,1516656904.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:04.777Z,1516656904.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:05.128Z,1516656905.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:05.165Z,1516656905.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:05.572Z,1516656905.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:05.924Z,1516656905.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:05.984Z,1516656905.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:06.373Z,1516656906.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:06.719Z,1516656906.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:06.786Z,1516656906.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:07.136Z,1516656907.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:07.165Z,1516656907.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:07.568Z,1516656907.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:07.931Z,1516656907.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:07.977Z,1516656907.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:08.414Z,1516656908.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:08.727Z,1516656908.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:08.778Z,1516656908.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:09.132Z,1516656909.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:09.176Z,1516656909.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:09.569Z,1516656909.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:09.927Z,1516656909.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:09.988Z,1516656909.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:10.416Z,1516656910.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:10.723Z,1516656910.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:10.781Z,1516656910.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:11.127Z,1516656911.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:11.167Z,1516656911.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:11.564Z,1516656911.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:11.924Z,1516656911.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:11.967Z,1516656911.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:12.422Z,1516656912.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:12.719Z,1516656912.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:12.788Z,1516656912.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:13.124Z,1516656913.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:13.154Z,1516656913.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:13.552Z,1516656913.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:13.919Z,1516656913.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:13.982Z,1516656913.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:14.433Z,1516656914.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:14.715Z,1516656914.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:14.766Z,1516656914.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:15.119Z,1516656915.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:15.162Z,1516656915.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:15.560Z,1516656915.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:15.915Z,1516656915.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:15.982Z,1516656915.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:16.427Z,1516656916.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:16.724Z,1516656916.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:16.787Z,1516656916.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:17.128Z,1516656917.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:17.172Z,1516656917.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:17.568Z,1516656917.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:17.924Z,1516656917.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:17.983Z,1516656917.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:18.375Z,1516656918.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:18.720Z,1516656918.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:18.803Z,1516656918.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:19.155Z,1516656919.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:19.165Z,1516656919.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:19.552Z,1516656919.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:19.951Z,1516656919.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:19.987Z,1516656919.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:20.382Z,1516656920.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:20.748Z,1516656920.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:20.795Z,1516656920.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:21.154Z,1516656921.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:21.195Z,1516656921.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:21.556Z,1516656921.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:21.978Z,1516656921.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:21.991Z,1516656921.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:22.435Z,1516656922.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:22.766Z,1516656922.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:22.787Z,1516656922.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:23.161Z,1516656923.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:23.191Z,1516656923.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:23.556Z,1516656923.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:23.966Z,1516656923.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:23.987Z,1516656923.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:24.420Z,1516656924.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:24.766Z,1516656924.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:24.783Z,1516656924.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:25.166Z,1516656925.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:25.187Z,1516656925.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:25.560Z,1516656925.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:25.971Z,1516656925.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:25.983Z,1516656925.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:26.421Z,1516656926.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:26.772Z,1516656926.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:26.779Z,1516656926.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:27.176Z,1516656927.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:27.183Z,1516656927.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:27.566Z,1516656927.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:27.973Z,1516656927.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:27.979Z,1516656927.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:28.440Z,1516656928.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:28.775Z,1516656928.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:28.777Z,1516656928.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:29.153Z,1516656929.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:29.179Z,1516656929.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:29.554Z,1516656929.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:29.953Z,1516656929.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:29.975Z,1516656929.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:30.374Z,1516656930.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:30.771Z,1516656930.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:31.175Z,1516656931.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:31.971Z,1516656931.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:32.768Z,1516656932.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:33.191Z,1516656933.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:33.654Z,1516656933.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:33.800Z,1516656933.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:33.987Z,1516656933.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:34.140Z,1516656934.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:34.534Z,1516656934.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:34.783Z,1516656934.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:34.928Z,1516656934.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:35.187Z,1516656935.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:35.339Z,1516656935.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:35.742Z,1516656935.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:35.983Z,1516656935.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:36.134Z,1516656936.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:36.529Z,1516656936.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:36.779Z,1516656936.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:36.932Z,1516656936.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:37.183Z,1516656937.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:37.332Z,1516656937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:37.716Z,1516656937.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:37.979Z,1516656937.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:38.142Z,1516656938.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:38.549Z,1516656938.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:38.775Z,1516656938.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:38.949Z,1516656938.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:39.179Z,1516656939.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:39.324Z,1516656939.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:39.720Z,1516656939.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:39.975Z,1516656939.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:40.128Z,1516656940.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:40.519Z,1516656940.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:40.771Z,1516656940.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:40.918Z,1516656940.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:41.223Z,1516656941.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:41.326Z,1516656941.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:41.726Z,1516656941.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:42.019Z,1516656942.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:42.130Z,1516656942.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:42.524Z,1516656942.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:42.815Z,1516656942.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:42.920Z,1516656942.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:43.219Z,1516656943.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:43.326Z,1516656943.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:43.726Z,1516656943.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:44.015Z,1516656944.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:44.140Z,1516656944.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:44.538Z,1516656944.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:44.811Z,1516656944.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:44.932Z,1516656944.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:45.215Z,1516656945.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:45.331Z,1516656945.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:45.726Z,1516656945.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:46.011Z,1516656946.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:46.127Z,1516656946.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:46.532Z,1516656946.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:46.807Z,1516656946.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:46.932Z,1516656946.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:47.211Z,1516656947.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:47.339Z,1516656947.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:47.739Z,1516656947.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:48.007Z,1516656948.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:48.137Z,1516656948.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:48.532Z,1516656948.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:48.805Z,1516656948.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:48.930Z,1516656948.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:49.211Z,1516656949.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:49.325Z,1516656949.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:49.728Z,1516656949.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:49.741Z,1516656949.741 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T21:35:50.007Z,1516656950.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:50.140Z,1516656950.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:50.540Z,1516656950.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:50.803Z,1516656950.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:50.946Z,1516656950.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:51.207Z,1516656951.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:51.320Z,1516656951.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:51.728Z,1516656951.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:52.003Z,1516656952.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:52.112Z,1516656952.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:52.539Z,1516656952.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:52.799Z,1516656952.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:52.939Z,1516656952.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:53.203Z,1516656953.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:53.338Z,1516656953.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:53.744Z,1516656953.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:53.999Z,1516656953.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:54.126Z,1516656954.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:54.519Z,1516656954.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:54.795Z,1516656954.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:54.924Z,1516656954.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:55.199Z,1516656955.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:55.328Z,1516656955.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:55.719Z,1516656955.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:55.996Z,1516656955.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:56.126Z,1516656956.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:56.526Z,1516656956.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:56.791Z,1516656956.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:56.926Z,1516656956.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:57.195Z,1516656957.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:57.332Z,1516656957.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:57.728Z,1516656957.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:57.993Z,1516656957.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:58.119Z,1516656958.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:58.570Z,1516656958.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:58.787Z,1516656958.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:58.919Z,1516656958.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:59.191Z,1516656959.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:35:59.336Z,1516656959.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:59.740Z,1516656959.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:35:59.987Z,1516656959.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:00.132Z,1516656960.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:00.524Z,1516656960.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:00.785Z,1516656960.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:00.924Z,1516656960.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:01.211Z,1516656961.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:01.321Z,1516656961.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:01.721Z,1516656961.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:02.007Z,1516656962.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:02.133Z,1516656962.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:02.533Z,1516656962.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:02.805Z,1516656962.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:02.936Z,1516656962.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:03.211Z,1516656963.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:03.328Z,1516656963.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:03.720Z,1516656963.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:04.007Z,1516656964.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:04.124Z,1516656964.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:04.536Z,1516656964.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:04.803Z,1516656964.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:04.932Z,1516656964.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:05.207Z,1516656965.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:05.343Z,1516656965.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:05.737Z,1516656965.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:06.003Z,1516656966.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:06.141Z,1516656966.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:06.541Z,1516656966.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:06.799Z,1516656966.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:06.916Z,1516656966.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:07.203Z,1516656967.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:07.320Z,1516656967.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:07.720Z,1516656967.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:07.999Z,1516656967.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:08.145Z,1516656968.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:08.543Z,1516656968.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:08.795Z,1516656968.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:08.926Z,1516656968.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:09.199Z,1516656969.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:09.320Z,1516656969.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:09.724Z,1516656969.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:09.996Z,1516656969.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:10.120Z,1516656970.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:10.527Z,1516656970.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:10.791Z,1516656970.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:10.918Z,1516656970.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:11.195Z,1516656971.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:11.326Z,1516656971.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:11.726Z,1516656971.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:11.991Z,1516656971.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:12.126Z,1516656972.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:12.569Z,1516656972.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:12.789Z,1516656972.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:12.928Z,1516656972.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:13.195Z,1516656973.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:13.329Z,1516656973.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:13.719Z,1516656973.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:13.993Z,1516656973.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:14.129Z,1516656974.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:14.532Z,1516656974.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:14.789Z,1516656974.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:14.927Z,1516656974.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:15.231Z,1516656975.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:15.323Z,1516656975.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:15.728Z,1516656975.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:16.027Z,1516656976.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:16.119Z,1516656976.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:16.534Z,1516656976.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:16.825Z,1516656976.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:16.924Z,1516656976.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:17.231Z,1516656977.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:17.333Z,1516656977.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:17.736Z,1516656977.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:18.027Z,1516656978.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:18.127Z,1516656978.127 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:36:18.127Z,1516656978.127 [BPC1] Communications Fault, FailCount= 7
2018-01-22T21:36:18.127Z,1516656978.127 [BPC1](ERROR): Communications Fault
2018-01-22T21:36:18.135Z,1516656978.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:18.148Z,1516656978.148 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:36:18.532Z,1516656978.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:18.823Z,1516656978.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:18.932Z,1516656978.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:19.227Z,1516656979.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:19.329Z,1516656979.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:19.342Z,1516656979.342 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:36:19.343Z,1516656979.343 [BPC1] No Fault, FailCount= 7
2018-01-22T21:36:19.776Z,1516656979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:20.023Z,1516656980.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:20.130Z,1516656980.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:20.542Z,1516656980.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:20.819Z,1516656980.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:20.940Z,1516656980.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:21.223Z,1516656981.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:21.328Z,1516656981.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:21.727Z,1516656981.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:22.019Z,1516656982.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:22.129Z,1516656982.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:22.546Z,1516656982.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:22.815Z,1516656982.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:22.920Z,1516656982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:23.219Z,1516656983.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:23.336Z,1516656983.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:23.740Z,1516656983.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:24.017Z,1516656984.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:24.140Z,1516656984.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:24.547Z,1516656984.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:24.811Z,1516656984.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:24.936Z,1516656984.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:25.215Z,1516656985.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:25.312Z,1516656985.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:25.716Z,1516656985.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:26.011Z,1516656986.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:26.144Z,1516656986.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:26.585Z,1516656986.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:26.807Z,1516656986.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:26.941Z,1516656986.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:27.211Z,1516656987.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:27.317Z,1516656987.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:27.724Z,1516656987.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:28.007Z,1516656988.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:28.162Z,1516656988.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:28.521Z,1516656988.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:28.805Z,1516656988.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:28.929Z,1516656988.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:29.255Z,1516656989.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:29.327Z,1516656989.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:29.727Z,1516656989.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:30.051Z,1516656990.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:30.127Z,1516656990.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:30.521Z,1516656990.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:30.849Z,1516656990.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:31.255Z,1516656991.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:32.051Z,1516656992.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:32.847Z,1516656992.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:33.251Z,1516656993.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:33.749Z,1516656993.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:33.894Z,1516656993.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:34.047Z,1516656994.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:34.225Z,1516656994.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:34.620Z,1516656994.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:34.843Z,1516656994.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:35.043Z,1516656995.043 [BPC1](INFO): Initialized
2018-01-22T21:36:35.064Z,1516656995.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:35.247Z,1516656995.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:35.428Z,1516656995.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:35.822Z,1516656995.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:36.045Z,1516656996.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:36.216Z,1516656996.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:36.620Z,1516656996.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:36.839Z,1516656996.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:37.030Z,1516656997.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:37.243Z,1516656997.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:37.426Z,1516656997.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:37.836Z,1516656997.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:38.039Z,1516656998.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:38.232Z,1516656998.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:38.616Z,1516656998.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:38.835Z,1516656998.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:39.032Z,1516656999.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:39.239Z,1516656999.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:39.420Z,1516656999.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:39.817Z,1516656999.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:40.035Z,1516657000.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:40.235Z,1516657000.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:40.644Z,1516657000.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:40.831Z,1516657000.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:41.030Z,1516657001.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:41.235Z,1516657001.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:41.421Z,1516657001.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:41.823Z,1516657001.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:42.031Z,1516657002.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:42.222Z,1516657002.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:42.621Z,1516657002.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:42.829Z,1516657002.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:43.024Z,1516657003.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:43.275Z,1516657003.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:43.430Z,1516657003.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:43.827Z,1516657003.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:44.071Z,1516657004.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:44.236Z,1516657004.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:44.622Z,1516657004.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:44.869Z,1516657004.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:45.024Z,1516657005.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:45.275Z,1516657005.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:45.433Z,1516657005.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:45.820Z,1516657005.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:46.071Z,1516657006.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:46.230Z,1516657006.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:46.629Z,1516657006.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:46.867Z,1516657006.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:47.036Z,1516657007.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:47.271Z,1516657007.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:47.426Z,1516657007.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:47.840Z,1516657007.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:48.067Z,1516657008.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:48.222Z,1516657008.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:48.622Z,1516657008.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:48.863Z,1516657008.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:49.060Z,1516657009.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:49.267Z,1516657009.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:49.440Z,1516657009.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:49.836Z,1516657009.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:50.064Z,1516657010.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:50.239Z,1516657010.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:50.618Z,1516657010.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:50.859Z,1516657010.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:51.056Z,1516657011.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:51.263Z,1516657011.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:51.425Z,1516657011.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:51.820Z,1516657011.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:52.060Z,1516657012.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:52.244Z,1516657012.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:52.644Z,1516657012.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:52.855Z,1516657012.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:53.034Z,1516657013.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:53.432Z,1516657013.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:53.487Z,1516657013.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:53.840Z,1516657013.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:54.229Z,1516657014.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:54.284Z,1516657014.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:54.682Z,1516657014.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:55.045Z,1516657015.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:55.079Z,1516657015.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:55.444Z,1516657015.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:55.444Z,1516657015.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-01-22T21:36:55.444Z,1516657015.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:36:55.446Z,1516657015.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:55.446Z,1516657015.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-01-22T21:36:55.446Z,1516657015.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:36:55.448Z,1516657015.448 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:55.449Z,1516657015.449 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-01-22T21:36:55.449Z,1516657015.449 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:36:55.468Z,1516657015.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:36:55.469Z,1516657015.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:36:55.469Z,1516657015.469 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:36:55.877Z,1516657015.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:55.882Z,1516657015.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:36:55.882Z,1516657015.882 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-01-22T21:36:55.895Z,1516657015.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:36:55.895Z,1516657015.895 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-01-22T21:36:55.895Z,1516657015.895 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:36:55.895Z,1516657015.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-01-22T21:36:56.240Z,1516657016.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:36:56.240Z,1516657016.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:36:56.240Z,1516657016.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:36:56.241Z,1516657016.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:36:56.241Z,1516657016.241 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:36:56.241Z,1516657016.241 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:36:56.242Z,1516657016.242 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:36:56.242Z,1516657016.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:36:56.247Z,1516657016.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:36:56.640Z,1516657016.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:56.687Z,1516657016.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:57.013Z,1516657017.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:57.311Z,1516657017.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:57.444Z,1516657017.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:57.825Z,1516657017.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:58.108Z,1516657018.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:58.228Z,1516657018.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:58.649Z,1516657018.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:58.904Z,1516657018.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:59.045Z,1516657019.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:59.319Z,1516657019.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:36:59.432Z,1516657019.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:36:59.826Z,1516657019.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:00.115Z,1516657020.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:00.236Z,1516657020.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:00.629Z,1516657020.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:00.912Z,1516657020.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:01.016Z,1516657021.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:01.315Z,1516657021.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:01.453Z,1516657021.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:01.871Z,1516657021.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:02.112Z,1516657022.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:02.257Z,1516657022.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:02.694Z,1516657022.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:02.907Z,1516657022.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:03.028Z,1516657023.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:03.311Z,1516657023.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:03.448Z,1516657023.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:03.834Z,1516657023.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:04.108Z,1516657024.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:04.232Z,1516657024.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:04.657Z,1516657024.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:04.903Z,1516657024.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:05.048Z,1516657025.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:05.307Z,1516657025.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:05.460Z,1516657025.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:05.830Z,1516657025.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:06.103Z,1516657026.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:06.220Z,1516657026.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:06.626Z,1516657026.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:06.899Z,1516657026.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:07.028Z,1516657027.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:07.303Z,1516657027.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:07.429Z,1516657027.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:07.830Z,1516657027.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:08.101Z,1516657028.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:08.228Z,1516657028.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:08.656Z,1516657028.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:08.896Z,1516657028.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:09.010Z,1516657029.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:09.299Z,1516657029.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:09.416Z,1516657029.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:09.811Z,1516657029.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:10.096Z,1516657030.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:10.222Z,1516657030.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:10.625Z,1516657030.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:10.893Z,1516657030.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:11.045Z,1516657031.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:11.319Z,1516657031.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:11.416Z,1516657031.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:11.812Z,1516657031.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:12.115Z,1516657032.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:12.211Z,1516657032.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:12.616Z,1516657032.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:12.913Z,1516657032.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:13.020Z,1516657033.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:13.319Z,1516657033.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:13.422Z,1516657033.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:13.822Z,1516657033.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:14.115Z,1516657034.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:14.246Z,1516657034.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:14.647Z,1516657034.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:14.911Z,1516657034.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:15.020Z,1516657035.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:15.315Z,1516657035.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:15.419Z,1516657035.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:15.815Z,1516657035.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:16.112Z,1516657036.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:16.232Z,1516657036.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:16.635Z,1516657036.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:16.907Z,1516657036.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:17.025Z,1516657037.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:17.311Z,1516657037.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:17.426Z,1516657037.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:17.821Z,1516657037.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:18.107Z,1516657038.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:18.216Z,1516657038.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:18.634Z,1516657038.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:18.903Z,1516657038.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:19.027Z,1516657039.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:19.307Z,1516657039.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:19.429Z,1516657039.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:19.829Z,1516657039.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:20.104Z,1516657040.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:20.229Z,1516657040.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:20.635Z,1516657040.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:20.899Z,1516657040.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:21.028Z,1516657041.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:21.303Z,1516657041.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:21.423Z,1516657041.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:21.817Z,1516657041.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:22.101Z,1516657042.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:22.231Z,1516657042.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:22.681Z,1516657042.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:22.895Z,1516657042.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:23.037Z,1516657043.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:23.299Z,1516657043.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:23.432Z,1516657043.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:23.812Z,1516657043.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:24.095Z,1516657044.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:24.208Z,1516657044.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:24.612Z,1516657044.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:24.893Z,1516657044.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:25.039Z,1516657045.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:25.339Z,1516657045.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:25.430Z,1516657045.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:25.902Z,1516657045.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:26.135Z,1516657046.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:26.240Z,1516657046.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:26.612Z,1516657046.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:26.933Z,1516657046.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:27.035Z,1516657047.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:27.339Z,1516657047.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:27.417Z,1516657047.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:27.811Z,1516657047.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:28.135Z,1516657048.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:28.222Z,1516657048.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:28.654Z,1516657048.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:28.933Z,1516657048.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:29.023Z,1516657049.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:29.335Z,1516657049.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:29.430Z,1516657049.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:29.819Z,1516657049.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:29.822Z,1516657049.822 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T21:37:29.822Z,1516657049.822 [Default:CheckIn:C.Wait] Stopped
2018-01-22T21:37:29.822Z,1516657049.822 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T21:37:30.133Z,1516657050.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:30.312Z,1516657050.312 [Default:CheckIn:D] Running Loop=1
2018-01-22T21:37:30.431Z,1516657050.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:30.443Z,1516657050.443 [Default:CheckIn:D] Stopped
2018-01-22T21:37:30.443Z,1516657050.443 [Default:CheckIn:E] Running Loop=1
2018-01-22T21:37:30.808Z,1516657050.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:30.812Z,1516657050.812 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.095915 min 
2018-01-22T21:37:30.812Z,1516657050.812 [Default:CheckIn:E] Stopped
2018-01-22T21:37:30.812Z,1516657050.812 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T21:37:30.812Z,1516657050.812 [Default:CheckIn] Stopped
2018-01-22T21:37:30.812Z,1516657050.812 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:37:30.813Z,1516657050.813 [Default:CheckIn](INFO): Running loop #20
2018-01-22T21:37:30.813Z,1516657050.813 [Default:CheckIn] Running Loop=20
2018-01-22T21:37:30.813Z,1516657050.813 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T21:37:30.813Z,1516657050.813 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T21:37:30.927Z,1516657050.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:31.331Z,1516657051.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:32.127Z,1516657052.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:32.923Z,1516657052.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:33.327Z,1516657053.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:34.124Z,1516657054.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:34.125Z,1516657054.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:34.284Z,1516657054.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:34.661Z,1516657054.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:34.919Z,1516657054.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:35.005Z,1516657055.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:35.323Z,1516657055.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:35.392Z,1516657055.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:35.792Z,1516657055.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:36.119Z,1516657056.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:36.224Z,1516657056.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:36.625Z,1516657056.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:36.915Z,1516657056.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:37.012Z,1516657057.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:37.319Z,1516657057.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:37.392Z,1516657057.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:37.787Z,1516657057.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:38.115Z,1516657058.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:38.206Z,1516657058.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:38.612Z,1516657058.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:38.924Z,1516657058.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:39.016Z,1516657059.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:39.368Z,1516657059.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:39.400Z,1516657059.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:39.812Z,1516657059.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:40.163Z,1516657060.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:40.207Z,1516657060.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:40.604Z,1516657060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:40.960Z,1516657060.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:41.027Z,1516657061.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:41.383Z,1516657061.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:41.393Z,1516657061.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:41.792Z,1516657061.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:42.179Z,1516657062.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:42.212Z,1516657062.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:42.661Z,1516657062.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:42.975Z,1516657062.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:43.024Z,1516657063.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:43.379Z,1516657063.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:43.398Z,1516657063.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:43.804Z,1516657063.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:44.175Z,1516657064.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:44.213Z,1516657064.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:44.649Z,1516657064.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:44.971Z,1516657064.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:45.016Z,1516657065.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:45.375Z,1516657065.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:45.395Z,1516657065.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:45.800Z,1516657065.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:46.171Z,1516657066.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:46.209Z,1516657066.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:46.653Z,1516657066.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:46.967Z,1516657066.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:47.024Z,1516657067.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:47.371Z,1516657067.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:47.396Z,1516657067.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:47.792Z,1516657067.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:48.167Z,1516657068.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:48.227Z,1516657068.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:48.664Z,1516657068.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:48.963Z,1516657068.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:48.998Z,1516657068.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:49.367Z,1516657069.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:49.399Z,1516657069.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:49.799Z,1516657069.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:50.163Z,1516657070.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:50.199Z,1516657070.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:50.600Z,1516657070.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:50.959Z,1516657070.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:51.012Z,1516657071.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:51.364Z,1516657071.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:51.404Z,1516657071.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:51.805Z,1516657071.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:52.159Z,1516657072.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:52.220Z,1516657072.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:52.617Z,1516657072.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:52.956Z,1516657072.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:53.059Z,1516657073.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:53.408Z,1516657073.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:53.431Z,1516657073.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:53.788Z,1516657073.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:54.218Z,1516657074.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:54.227Z,1516657074.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:54.593Z,1516657074.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:55.023Z,1516657075.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:55.037Z,1516657075.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:55.396Z,1516657075.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:55.431Z,1516657075.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:55.788Z,1516657075.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:56.201Z,1516657076.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:56.228Z,1516657076.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:56.679Z,1516657076.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:57.004Z,1516657077.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:57.023Z,1516657077.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:57.400Z,1516657077.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:57.427Z,1516657077.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:57.799Z,1516657077.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:58.204Z,1516657078.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:58.223Z,1516657078.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:58.662Z,1516657078.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:59.008Z,1516657079.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:59.019Z,1516657079.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:59.400Z,1516657079.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:37:59.423Z,1516657079.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:37:59.796Z,1516657079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:00.216Z,1516657080.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:00.219Z,1516657080.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:00.667Z,1516657080.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:01.006Z,1516657081.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:01.015Z,1516657081.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:01.388Z,1516657081.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:01.419Z,1516657081.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:01.787Z,1516657081.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:02.197Z,1516657082.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:02.215Z,1516657082.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:02.688Z,1516657082.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:03.008Z,1516657083.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:03.011Z,1516657083.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:03.392Z,1516657083.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:03.415Z,1516657083.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:03.798Z,1516657083.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:04.196Z,1516657084.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:04.211Z,1516657084.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:04.604Z,1516657084.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:04.999Z,1516657084.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:05.007Z,1516657085.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:05.402Z,1516657085.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:05.411Z,1516657085.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:05.792Z,1516657085.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:06.191Z,1516657086.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:06.207Z,1516657086.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:06.586Z,1516657086.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:07.004Z,1516657087.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:07.036Z,1516657087.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:07.398Z,1516657087.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:07.483Z,1516657087.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:07.793Z,1516657087.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:08.210Z,1516657088.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:08.279Z,1516657088.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:08.599Z,1516657088.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:09.052Z,1516657089.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:09.083Z,1516657089.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:09.392Z,1516657089.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:09.487Z,1516657089.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:09.804Z,1516657089.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:10.196Z,1516657090.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:10.283Z,1516657090.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:10.677Z,1516657090.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:11.006Z,1516657091.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:11.079Z,1516657091.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:11.413Z,1516657091.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:11.483Z,1516657091.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:11.801Z,1516657091.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:12.196Z,1516657092.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:12.279Z,1516657092.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:12.639Z,1516657092.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:13.008Z,1516657093.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:13.075Z,1516657093.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:13.412Z,1516657093.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:13.479Z,1516657093.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:13.805Z,1516657093.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:14.206Z,1516657094.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:14.275Z,1516657094.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:14.592Z,1516657094.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:14.992Z,1516657094.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:15.072Z,1516657095.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:15.408Z,1516657095.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:15.475Z,1516657095.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:15.801Z,1516657095.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:16.200Z,1516657096.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:16.271Z,1516657096.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:16.608Z,1516657096.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:17.009Z,1516657097.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:17.067Z,1516657097.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:17.416Z,1516657097.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:17.471Z,1516657097.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:17.788Z,1516657097.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:18.184Z,1516657098.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:18.267Z,1516657098.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:18.588Z,1516657098.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:18.988Z,1516657098.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:19.063Z,1516657099.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:19.410Z,1516657099.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:19.467Z,1516657099.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:19.817Z,1516657099.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:20.198Z,1516657100.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:20.263Z,1516657100.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:20.592Z,1516657100.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:21.040Z,1516657101.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:21.059Z,1516657101.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:21.390Z,1516657101.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:21.479Z,1516657101.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:21.801Z,1516657101.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:22.190Z,1516657102.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:22.275Z,1516657102.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:22.600Z,1516657102.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:23.068Z,1516657103.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:23.072Z,1516657103.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:23.406Z,1516657103.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:23.475Z,1516657103.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:23.799Z,1516657103.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:24.200Z,1516657104.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:24.271Z,1516657104.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:24.584Z,1516657104.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:24.998Z,1516657104.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:25.067Z,1516657105.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:25.398Z,1516657105.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:25.471Z,1516657105.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:25.798Z,1516657105.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:26.197Z,1516657106.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:26.267Z,1516657106.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:26.600Z,1516657106.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:27.001Z,1516657107.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:27.063Z,1516657107.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:27.405Z,1516657107.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:27.467Z,1516657107.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:27.786Z,1516657107.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:28.188Z,1516657108.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:28.263Z,1516657108.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:28.616Z,1516657108.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:29.004Z,1516657109.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:29.060Z,1516657109.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:29.399Z,1516657109.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:29.463Z,1516657109.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:29.800Z,1516657109.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:30.197Z,1516657110.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:30.259Z,1516657110.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:30.608Z,1516657110.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:30.997Z,1516657110.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:31.055Z,1516657111.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:31.459Z,1516657111.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:32.255Z,1516657112.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:33.051Z,1516657113.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:33.455Z,1516657113.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:34.251Z,1516657114.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:34.310Z,1516657114.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:34.464Z,1516657114.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:34.796Z,1516657114.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:35.048Z,1516657115.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:35.204Z,1516657115.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:35.455Z,1516657115.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:35.572Z,1516657115.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:35.971Z,1516657115.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:36.251Z,1516657116.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:36.402Z,1516657116.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:36.794Z,1516657116.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:37.048Z,1516657117.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:37.194Z,1516657117.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:37.455Z,1516657117.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:37.572Z,1516657117.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:37.968Z,1516657117.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:38.252Z,1516657118.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:38.376Z,1516657118.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:38.768Z,1516657118.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:39.047Z,1516657119.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:39.176Z,1516657119.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:39.451Z,1516657119.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:39.586Z,1516657119.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:40.012Z,1516657120.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:40.247Z,1516657120.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:40.394Z,1516657120.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:40.785Z,1516657120.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:41.043Z,1516657121.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:41.188Z,1516657121.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:41.447Z,1516657121.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:41.586Z,1516657121.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:41.986Z,1516657121.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:42.243Z,1516657122.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:42.393Z,1516657122.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:42.790Z,1516657122.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:43.039Z,1516657123.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:43.192Z,1516657123.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:43.443Z,1516657123.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:43.588Z,1516657123.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:43.979Z,1516657123.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:44.239Z,1516657124.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:44.367Z,1516657124.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:44.773Z,1516657124.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:45.035Z,1516657125.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:45.192Z,1516657125.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:45.439Z,1516657125.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:45.601Z,1516657125.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:46.008Z,1516657126.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:46.237Z,1516657126.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:46.398Z,1516657126.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:46.814Z,1516657126.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:47.031Z,1516657127.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:47.185Z,1516657127.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:47.435Z,1516657127.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:47.585Z,1516657127.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:47.988Z,1516657127.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:48.231Z,1516657128.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:48.396Z,1516657128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:48.793Z,1516657128.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:49.029Z,1516657129.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:49.199Z,1516657129.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:49.471Z,1516657129.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:49.589Z,1516657129.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:49.970Z,1516657129.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:50.267Z,1516657130.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:50.374Z,1516657130.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:50.781Z,1516657130.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:51.065Z,1516657131.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:51.176Z,1516657131.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:51.475Z,1516657131.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:51.594Z,1516657131.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:51.989Z,1516657131.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:52.271Z,1516657132.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:52.393Z,1516657132.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:52.786Z,1516657132.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:53.067Z,1516657133.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:53.185Z,1516657133.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:53.471Z,1516657133.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:53.578Z,1516657133.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:53.988Z,1516657133.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:54.267Z,1516657134.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:54.396Z,1516657134.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:54.794Z,1516657134.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:55.065Z,1516657135.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:55.196Z,1516657135.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:55.473Z,1516657135.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:55.568Z,1516657135.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:55.968Z,1516657135.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:56.267Z,1516657136.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:56.395Z,1516657136.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:56.796Z,1516657136.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:57.063Z,1516657137.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:57.191Z,1516657137.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:57.467Z,1516657137.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:57.589Z,1516657137.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:57.996Z,1516657137.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:58.263Z,1516657138.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:58.396Z,1516657138.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:58.796Z,1516657138.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:59.059Z,1516657139.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:59.192Z,1516657139.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:59.463Z,1516657139.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:38:59.568Z,1516657139.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:38:59.972Z,1516657139.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:00.259Z,1516657140.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:00.398Z,1516657140.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:00.850Z,1516657140.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:01.055Z,1516657141.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:01.182Z,1516657141.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:01.459Z,1516657141.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:01.572Z,1516657141.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:01.980Z,1516657141.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:02.255Z,1516657142.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:02.374Z,1516657142.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:02.781Z,1516657142.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:03.053Z,1516657143.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:03.182Z,1516657143.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:03.497Z,1516657143.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:03.586Z,1516657143.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:03.988Z,1516657143.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:04.291Z,1516657144.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:04.392Z,1516657144.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:04.776Z,1516657144.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:05.089Z,1516657145.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:05.186Z,1516657145.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:05.495Z,1516657145.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:05.577Z,1516657145.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:05.984Z,1516657145.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:06.291Z,1516657146.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:06.394Z,1516657146.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:06.805Z,1516657146.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:07.087Z,1516657147.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:07.190Z,1516657147.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:07.491Z,1516657147.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:07.584Z,1516657147.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:07.982Z,1516657147.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:08.287Z,1516657148.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:08.382Z,1516657148.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:08.795Z,1516657148.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:09.083Z,1516657149.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:09.188Z,1516657149.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:09.487Z,1516657149.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:09.589Z,1516657149.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:10.002Z,1516657150.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:10.283Z,1516657150.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:10.389Z,1516657150.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:10.794Z,1516657150.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:11.079Z,1516657151.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:11.181Z,1516657151.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:11.483Z,1516657151.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:11.584Z,1516657151.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:11.967Z,1516657151.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:12.279Z,1516657152.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:12.393Z,1516657152.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:12.806Z,1516657152.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:13.077Z,1516657153.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:13.186Z,1516657153.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:13.483Z,1516657153.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:13.572Z,1516657153.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:13.968Z,1516657153.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:14.281Z,1516657154.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:14.376Z,1516657154.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:14.855Z,1516657154.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:15.075Z,1516657155.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:15.176Z,1516657155.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:15.479Z,1516657155.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:15.582Z,1516657155.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:15.986Z,1516657155.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:16.275Z,1516657156.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:16.382Z,1516657156.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:16.773Z,1516657156.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:17.073Z,1516657157.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:17.185Z,1516657157.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:17.511Z,1516657157.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:17.579Z,1516657157.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:17.983Z,1516657157.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:18.307Z,1516657158.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:18.384Z,1516657158.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:18.788Z,1516657158.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:19.104Z,1516657159.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:19.207Z,1516657159.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:19.511Z,1516657159.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:19.584Z,1516657159.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:19.978Z,1516657159.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:20.307Z,1516657160.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:20.388Z,1516657160.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:20.827Z,1516657160.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:21.103Z,1516657161.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:21.192Z,1516657161.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:21.507Z,1516657161.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:21.600Z,1516657161.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:21.990Z,1516657161.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:22.304Z,1516657162.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:22.396Z,1516657162.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:22.810Z,1516657162.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:23.099Z,1516657163.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:23.173Z,1516657163.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:23.503Z,1516657163.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:23.569Z,1516657163.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:23.968Z,1516657163.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:24.299Z,1516657164.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:24.402Z,1516657164.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:24.844Z,1516657164.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:25.095Z,1516657165.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:25.202Z,1516657165.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:25.499Z,1516657165.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:25.584Z,1516657165.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:25.976Z,1516657165.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:26.295Z,1516657166.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:26.388Z,1516657166.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:26.827Z,1516657166.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:27.092Z,1516657167.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:27.180Z,1516657167.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:27.495Z,1516657167.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:27.599Z,1516657167.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:28.012Z,1516657168.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:28.291Z,1516657168.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:28.399Z,1516657168.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:28.825Z,1516657168.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:29.087Z,1516657169.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:29.192Z,1516657169.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:29.491Z,1516657169.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:29.577Z,1516657169.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:29.974Z,1516657169.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:30.287Z,1516657170.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:30.401Z,1516657170.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:30.793Z,1516657170.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:31.085Z,1516657171.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:31.205Z,1516657171.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:31.539Z,1516657171.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:32.335Z,1516657172.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:33.131Z,1516657173.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:33.551Z,1516657173.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:34.347Z,1516657174.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:34.492Z,1516657174.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:34.604Z,1516657174.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:35.023Z,1516657175.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:35.143Z,1516657175.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:35.403Z,1516657175.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:35.547Z,1516657175.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:35.800Z,1516657175.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:36.187Z,1516657176.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:36.343Z,1516657176.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:36.589Z,1516657176.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:36.989Z,1516657176.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:37.139Z,1516657177.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:37.400Z,1516657177.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:37.543Z,1516657177.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:37.804Z,1516657177.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:38.202Z,1516657178.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:38.339Z,1516657178.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:38.600Z,1516657178.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:38.990Z,1516657178.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:39.135Z,1516657179.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:39.398Z,1516657179.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:39.539Z,1516657179.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:39.810Z,1516657179.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:40.205Z,1516657180.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:40.335Z,1516657180.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:40.597Z,1516657180.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:40.992Z,1516657180.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:41.131Z,1516657181.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:41.415Z,1516657181.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:41.535Z,1516657181.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:41.802Z,1516657181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:42.206Z,1516657182.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:42.331Z,1516657182.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:42.596Z,1516657182.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:42.993Z,1516657182.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:43.127Z,1516657183.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:43.398Z,1516657183.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:43.531Z,1516657183.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:43.807Z,1516657183.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:44.203Z,1516657184.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:44.327Z,1516657184.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:44.604Z,1516657184.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:45.005Z,1516657185.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:45.126Z,1516657185.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:45.410Z,1516657185.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:45.555Z,1516657185.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:45.804Z,1516657185.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:46.213Z,1516657186.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:46.351Z,1516657186.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:46.604Z,1516657186.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:46.986Z,1516657186.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:47.148Z,1516657187.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:47.420Z,1516657187.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:47.555Z,1516657187.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:47.810Z,1516657187.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:48.205Z,1516657188.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:48.351Z,1516657188.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:48.606Z,1516657188.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:48.992Z,1516657188.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:49.147Z,1516657189.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:49.396Z,1516657189.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:49.553Z,1516657189.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:49.797Z,1516657189.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:50.194Z,1516657190.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:50.347Z,1516657190.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:50.591Z,1516657190.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:50.997Z,1516657190.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:51.143Z,1516657191.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:51.404Z,1516657191.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:51.547Z,1516657191.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:51.800Z,1516657191.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:52.204Z,1516657192.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:52.343Z,1516657192.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:52.608Z,1516657192.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:52.991Z,1516657192.991 [PNI_TCM](ERROR): CRC does not match. Expected:0x14266 got:0x19330
2018-01-22T21:39:53.026Z,1516657193.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:53.139Z,1516657193.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:53.403Z,1516657193.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:53.543Z,1516657193.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:53.796Z,1516657193.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:54.201Z,1516657194.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:54.339Z,1516657194.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:54.607Z,1516657194.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:55.006Z,1516657195.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:55.135Z,1516657195.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:55.405Z,1516657195.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:55.539Z,1516657195.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:55.805Z,1516657195.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:56.205Z,1516657196.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:56.335Z,1516657196.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:56.594Z,1516657196.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:56.594Z,1516657196.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-01-22T21:39:56.594Z,1516657196.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:39:56.600Z,1516657196.600 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:56.600Z,1516657196.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-01-22T21:39:56.600Z,1516657196.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:39:56.602Z,1516657196.602 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:56.607Z,1516657196.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-01-22T21:39:56.607Z,1516657196.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:39:56.633Z,1516657196.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:39:56.633Z,1516657196.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:39:56.633Z,1516657196.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:39:57.012Z,1516657197.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:39:57.012Z,1516657197.012 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-01-22T21:39:57.013Z,1516657197.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:39:57.013Z,1516657197.013 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-01-22T21:39:57.013Z,1516657197.013 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:39:57.013Z,1516657197.013 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-01-22T21:39:57.131Z,1516657197.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:57.405Z,1516657197.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:39:57.406Z,1516657197.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:39:57.406Z,1516657197.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:39:57.407Z,1516657197.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:39:57.407Z,1516657197.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:39:57.408Z,1516657197.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:39:57.408Z,1516657197.408 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:39:57.408Z,1516657197.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:39:57.409Z,1516657197.409 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:39:57.535Z,1516657197.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:57.816Z,1516657197.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:58.211Z,1516657198.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:58.331Z,1516657198.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:58.592Z,1516657198.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:59.004Z,1516657199.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:59.130Z,1516657199.130 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:59.411Z,1516657199.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:39:59.575Z,1516657199.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:39:59.816Z,1516657199.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:00.212Z,1516657200.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:00.371Z,1516657200.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:00.616Z,1516657200.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:00.990Z,1516657200.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:01.169Z,1516657201.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:01.401Z,1516657201.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:01.591Z,1516657201.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:01.808Z,1516657201.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:02.209Z,1516657202.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:02.388Z,1516657202.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:02.603Z,1516657202.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:03.003Z,1516657203.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:03.183Z,1516657203.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:03.408Z,1516657203.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:03.587Z,1516657203.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:03.820Z,1516657203.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:04.200Z,1516657204.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x54108 got:0x59928
2018-01-22T21:40:04.217Z,1516657204.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:04.383Z,1516657204.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:04.599Z,1516657204.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:05.000Z,1516657205.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:05.179Z,1516657205.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:05.416Z,1516657205.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:05.583Z,1516657205.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:05.807Z,1516657205.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:06.215Z,1516657206.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:06.379Z,1516657206.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:06.598Z,1516657206.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:06.992Z,1516657206.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:07.178Z,1516657207.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:07.412Z,1516657207.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:07.583Z,1516657207.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:07.809Z,1516657207.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:08.207Z,1516657208.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:08.379Z,1516657208.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:08.596Z,1516657208.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:09.006Z,1516657209.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:09.175Z,1516657209.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:09.404Z,1516657209.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:09.579Z,1516657209.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:09.808Z,1516657209.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:10.220Z,1516657210.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:10.375Z,1516657210.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:10.615Z,1516657210.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:11.004Z,1516657211.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:11.171Z,1516657211.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:11.399Z,1516657211.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:11.575Z,1516657211.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:11.818Z,1516657211.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:12.188Z,1516657212.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:12.371Z,1516657212.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:12.613Z,1516657212.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:12.999Z,1516657212.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:13.169Z,1516657213.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:13.422Z,1516657213.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:13.595Z,1516657213.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:13.796Z,1516657213.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:14.187Z,1516657214.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:14.391Z,1516657214.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:14.592Z,1516657214.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:14.996Z,1516657214.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:15.189Z,1516657215.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:15.386Z,1516657215.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:15.599Z,1516657215.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:15.800Z,1516657215.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:16.200Z,1516657216.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:16.395Z,1516657216.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:16.616Z,1516657216.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:16.985Z,1516657216.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:17.191Z,1516657217.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:17.402Z,1516657217.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:17.595Z,1516657217.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:17.797Z,1516657217.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:18.186Z,1516657218.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:18.391Z,1516657218.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:18.594Z,1516657218.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:18.994Z,1516657218.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:19.187Z,1516657219.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:19.400Z,1516657219.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:19.591Z,1516657219.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:19.790Z,1516657219.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:20.187Z,1516657220.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:20.387Z,1516657220.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:20.595Z,1516657220.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:20.999Z,1516657220.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:21.183Z,1516657221.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:21.396Z,1516657221.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:21.587Z,1516657221.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:21.798Z,1516657221.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:22.194Z,1516657222.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:22.383Z,1516657222.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:22.600Z,1516657222.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:22.992Z,1516657222.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:23.179Z,1516657223.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:23.401Z,1516657223.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:23.583Z,1516657223.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:23.791Z,1516657223.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:24.205Z,1516657224.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:24.379Z,1516657224.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:24.604Z,1516657224.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:25.035Z,1516657225.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:25.175Z,1516657225.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:25.428Z,1516657225.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:25.579Z,1516657225.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:25.800Z,1516657225.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:26.200Z,1516657226.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:26.375Z,1516657226.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:26.597Z,1516657226.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:27.002Z,1516657227.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:27.173Z,1516657227.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:27.398Z,1516657227.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:27.615Z,1516657227.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:27.805Z,1516657227.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:28.207Z,1516657228.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:28.411Z,1516657228.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:28.604Z,1516657228.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:28.998Z,1516657228.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:29.209Z,1516657229.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:29.400Z,1516657229.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:29.619Z,1516657229.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:29.792Z,1516657229.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:30.180Z,1516657230.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:30.415Z,1516657230.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:30.611Z,1516657230.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:31.020Z,1516657231.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:31.211Z,1516657231.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:31.411Z,1516657231.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:31.615Z,1516657231.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:32.411Z,1516657232.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:33.207Z,1516657233.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:33.611Z,1516657233.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:34.407Z,1516657234.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:34.668Z,1516657234.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:34.804Z,1516657234.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:35.157Z,1516657235.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:35.203Z,1516657235.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:35.572Z,1516657235.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:35.607Z,1516657235.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:35.955Z,1516657235.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:36.360Z,1516657236.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:36.404Z,1516657236.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:36.734Z,1516657236.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:37.146Z,1516657237.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:37.199Z,1516657237.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:37.548Z,1516657237.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:37.603Z,1516657237.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:37.944Z,1516657237.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:38.368Z,1516657238.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:38.399Z,1516657238.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:38.748Z,1516657238.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:39.148Z,1516657239.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:39.195Z,1516657239.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:39.549Z,1516657239.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:39.599Z,1516657239.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:39.936Z,1516657239.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:40.338Z,1516657240.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:40.395Z,1516657240.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:40.760Z,1516657240.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:41.149Z,1516657241.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:41.193Z,1516657241.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:41.564Z,1516657241.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:41.651Z,1516657241.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:41.945Z,1516657241.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:42.328Z,1516657242.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:42.447Z,1516657242.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:42.729Z,1516657242.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:43.156Z,1516657243.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:43.243Z,1516657243.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:43.558Z,1516657243.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:43.663Z,1516657243.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:43.952Z,1516657243.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:44.343Z,1516657244.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:44.459Z,1516657244.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:44.740Z,1516657244.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:45.140Z,1516657245.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:45.255Z,1516657245.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:45.540Z,1516657245.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:45.659Z,1516657245.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:45.937Z,1516657245.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:46.340Z,1516657246.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:46.457Z,1516657246.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:46.748Z,1516657246.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:47.148Z,1516657247.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:47.251Z,1516657247.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:47.552Z,1516657247.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:47.655Z,1516657247.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:47.944Z,1516657247.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:48.340Z,1516657248.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:48.451Z,1516657248.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:48.733Z,1516657248.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:49.143Z,1516657249.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:49.247Z,1516657249.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:49.557Z,1516657249.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:49.651Z,1516657249.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:49.951Z,1516657249.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:50.359Z,1516657250.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:50.447Z,1516657250.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:50.740Z,1516657250.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:51.144Z,1516657251.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:51.243Z,1516657251.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:51.528Z,1516657251.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:51.647Z,1516657251.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:51.929Z,1516657251.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:52.354Z,1516657252.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:52.443Z,1516657252.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:52.758Z,1516657252.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:53.168Z,1516657253.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:53.239Z,1516657253.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:53.562Z,1516657253.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:53.643Z,1516657253.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:53.930Z,1516657253.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:54.354Z,1516657254.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:54.439Z,1516657254.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:54.753Z,1516657254.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:55.128Z,1516657255.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:55.237Z,1516657255.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:55.564Z,1516657255.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:55.663Z,1516657255.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:55.958Z,1516657255.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:56.355Z,1516657256.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:56.459Z,1516657256.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:56.736Z,1516657256.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:57.136Z,1516657257.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:57.257Z,1516657257.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:57.533Z,1516657257.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:57.663Z,1516657257.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:57.936Z,1516657257.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:58.332Z,1516657258.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:58.459Z,1516657258.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:58.757Z,1516657258.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:59.160Z,1516657259.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:59.255Z,1516657259.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:59.551Z,1516657259.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:40:59.659Z,1516657259.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:40:59.936Z,1516657259.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:00.332Z,1516657260.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:00.455Z,1516657260.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:00.764Z,1516657260.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:01.136Z,1516657261.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:01.251Z,1516657261.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:01.555Z,1516657261.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:01.655Z,1516657261.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:01.955Z,1516657261.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:02.351Z,1516657262.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:02.451Z,1516657262.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:02.742Z,1516657262.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:03.144Z,1516657263.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:03.247Z,1516657263.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:03.542Z,1516657263.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:03.651Z,1516657263.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:03.942Z,1516657263.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:04.348Z,1516657264.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:04.447Z,1516657264.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:04.754Z,1516657264.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:05.150Z,1516657265.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:05.243Z,1516657265.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:05.563Z,1516657265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:05.647Z,1516657265.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:05.945Z,1516657265.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:06.347Z,1516657266.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:06.443Z,1516657266.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:06.730Z,1516657266.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:07.136Z,1516657267.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:07.241Z,1516657267.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:07.564Z,1516657267.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:07.647Z,1516657267.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:07.964Z,1516657267.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:08.368Z,1516657268.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:08.443Z,1516657268.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:08.728Z,1516657268.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:09.129Z,1516657269.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:09.241Z,1516657269.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:09.560Z,1516657269.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:09.683Z,1516657269.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:09.936Z,1516657269.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:10.333Z,1516657270.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:10.479Z,1516657270.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:10.759Z,1516657270.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:11.162Z,1516657271.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:11.277Z,1516657271.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:11.568Z,1516657271.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:11.683Z,1516657271.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:11.936Z,1516657271.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:12.344Z,1516657272.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:12.479Z,1516657272.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:12.744Z,1516657272.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:13.148Z,1516657273.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:13.275Z,1516657273.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:13.553Z,1516657273.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:13.679Z,1516657273.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:13.954Z,1516657273.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:14.354Z,1516657274.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:14.475Z,1516657274.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:14.745Z,1516657274.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:15.142Z,1516657275.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:15.271Z,1516657275.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:15.557Z,1516657275.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:15.675Z,1516657275.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:15.953Z,1516657275.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:16.356Z,1516657276.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:16.471Z,1516657276.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:16.746Z,1516657276.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:17.140Z,1516657277.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:17.269Z,1516657277.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:17.558Z,1516657277.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:17.675Z,1516657277.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:17.960Z,1516657277.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:18.359Z,1516657278.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:18.471Z,1516657278.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:18.746Z,1516657278.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:19.143Z,1516657279.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:19.267Z,1516657279.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:19.568Z,1516657279.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:19.671Z,1516657279.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:19.964Z,1516657279.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:20.364Z,1516657280.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:20.467Z,1516657280.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:20.754Z,1516657280.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:21.157Z,1516657281.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:21.263Z,1516657281.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:21.555Z,1516657281.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:21.667Z,1516657281.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:21.954Z,1516657281.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:22.360Z,1516657282.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:22.463Z,1516657282.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:22.752Z,1516657282.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:23.175Z,1516657283.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:23.261Z,1516657283.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:23.562Z,1516657283.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:23.719Z,1516657283.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:23.963Z,1516657283.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:24.361Z,1516657284.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:24.515Z,1516657284.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:24.756Z,1516657284.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:25.138Z,1516657285.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:25.311Z,1516657285.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:25.561Z,1516657285.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:25.715Z,1516657285.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:25.959Z,1516657285.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:26.359Z,1516657286.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:26.511Z,1516657286.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:26.760Z,1516657286.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:27.152Z,1516657287.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:27.307Z,1516657287.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:27.560Z,1516657287.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:27.711Z,1516657287.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:27.960Z,1516657287.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:28.366Z,1516657288.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:28.507Z,1516657288.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:28.742Z,1516657288.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:29.145Z,1516657289.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:29.303Z,1516657289.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:29.544Z,1516657289.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:29.707Z,1516657289.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:29.968Z,1516657289.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:30.348Z,1516657290.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:30.503Z,1516657290.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:30.748Z,1516657290.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:31.146Z,1516657291.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:31.299Z,1516657291.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:31.547Z,1516657291.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:31.706Z,1516657291.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:32.505Z,1516657292.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:33.299Z,1516657293.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:33.705Z,1516657293.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:34.500Z,1516657294.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:34.832Z,1516657294.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:35.050Z,1516657295.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:35.290Z,1516657295.290 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:41:35.291Z,1516657295.291 [BPC1] Communications Fault, FailCount= 8
2018-01-22T21:41:35.291Z,1516657295.291 [BPC1](ERROR): Communications Fault
2018-01-22T21:41:35.295Z,1516657295.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:35.301Z,1516657295.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:35.351Z,1516657295.351 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:41:35.699Z,1516657295.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:35.701Z,1516657295.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:36.096Z,1516657296.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:36.493Z,1516657296.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:36.496Z,1516657296.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:36.508Z,1516657296.508 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:41:36.508Z,1516657296.508 [BPC1] No Fault, FailCount= 8
2018-01-22T21:41:36.966Z,1516657296.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:37.293Z,1516657297.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:37.347Z,1516657297.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:37.710Z,1516657297.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:37.783Z,1516657297.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:38.103Z,1516657298.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:38.495Z,1516657298.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:38.580Z,1516657298.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:38.900Z,1516657298.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:39.365Z,1516657299.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:39.375Z,1516657299.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:39.719Z,1516657299.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:39.779Z,1516657299.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:40.116Z,1516657300.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:40.512Z,1516657300.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:40.575Z,1516657300.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:40.887Z,1516657300.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:41.315Z,1516657301.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:41.372Z,1516657301.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:41.712Z,1516657301.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:41.775Z,1516657301.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:42.096Z,1516657302.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:42.496Z,1516657302.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:42.571Z,1516657302.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:42.919Z,1516657302.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:43.297Z,1516657303.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:43.367Z,1516657303.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:43.705Z,1516657303.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:43.771Z,1516657303.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:44.100Z,1516657304.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:44.500Z,1516657304.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:44.567Z,1516657304.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:44.894Z,1516657304.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:45.306Z,1516657305.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:45.363Z,1516657305.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:45.712Z,1516657305.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:45.767Z,1516657305.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:46.120Z,1516657306.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:46.510Z,1516657306.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:46.563Z,1516657306.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:46.899Z,1516657306.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:47.301Z,1516657307.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:47.359Z,1516657307.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:47.694Z,1516657307.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:47.763Z,1516657307.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:48.094Z,1516657308.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:48.494Z,1516657308.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:48.559Z,1516657308.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:48.912Z,1516657308.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:49.312Z,1516657309.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:49.355Z,1516657309.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:49.708Z,1516657309.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:49.759Z,1516657309.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:50.102Z,1516657310.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:50.497Z,1516657310.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:50.555Z,1516657310.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:50.896Z,1516657310.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:51.351Z,1516657311.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:51.353Z,1516657311.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:51.702Z,1516657311.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:51.779Z,1516657311.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:52.131Z,1516657312.131 [BPC1](INFO): Initialized
2018-01-22T21:41:52.140Z,1516657312.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:52.500Z,1516657312.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:52.575Z,1516657312.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:52.896Z,1516657312.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:53.366Z,1516657313.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:53.371Z,1516657313.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:53.701Z,1516657313.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:53.791Z,1516657313.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:54.105Z,1516657314.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:54.495Z,1516657314.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:54.587Z,1516657314.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:54.904Z,1516657314.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:55.310Z,1516657315.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:55.384Z,1516657315.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:55.718Z,1516657315.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:55.787Z,1516657315.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:56.108Z,1516657316.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:56.538Z,1516657316.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:56.583Z,1516657316.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:56.893Z,1516657316.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:57.316Z,1516657317.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:57.379Z,1516657317.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:57.726Z,1516657317.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:57.783Z,1516657317.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:58.120Z,1516657318.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:58.528Z,1516657318.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:58.579Z,1516657318.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:58.909Z,1516657318.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:59.292Z,1516657319.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:59.375Z,1516657319.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:41:59.712Z,1516657319.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:41:59.779Z,1516657319.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:00.092Z,1516657320.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:00.490Z,1516657320.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:00.575Z,1516657320.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:00.917Z,1516657320.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:01.346Z,1516657321.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:01.371Z,1516657321.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:01.729Z,1516657321.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:01.775Z,1516657321.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:02.127Z,1516657322.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:02.540Z,1516657322.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:02.579Z,1516657322.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:02.901Z,1516657322.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:03.308Z,1516657323.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:03.375Z,1516657323.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:03.720Z,1516657323.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:03.779Z,1516657323.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:04.121Z,1516657324.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:04.559Z,1516657324.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:04.575Z,1516657324.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:04.920Z,1516657324.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:05.360Z,1516657325.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:05.371Z,1516657325.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:05.708Z,1516657325.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:05.815Z,1516657325.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:06.102Z,1516657326.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:06.501Z,1516657326.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:06.612Z,1516657326.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:06.937Z,1516657326.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:07.372Z,1516657327.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:07.407Z,1516657327.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:07.773Z,1516657327.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:07.883Z,1516657327.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:08.132Z,1516657328.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:08.496Z,1516657328.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:08.679Z,1516657328.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:08.898Z,1516657328.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:09.304Z,1516657329.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:09.435Z,1516657329.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:09.709Z,1516657329.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:10.113Z,1516657330.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:10.231Z,1516657330.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:10.511Z,1516657330.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:10.903Z,1516657330.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:11.032Z,1516657331.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:11.304Z,1516657331.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:11.439Z,1516657331.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:11.707Z,1516657331.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:12.107Z,1516657332.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:12.235Z,1516657332.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:12.503Z,1516657332.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:12.910Z,1516657332.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:13.034Z,1516657333.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:13.309Z,1516657333.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:13.455Z,1516657333.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:13.719Z,1516657333.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:14.104Z,1516657334.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:14.251Z,1516657334.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:14.484Z,1516657334.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:14.896Z,1516657334.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:15.047Z,1516657335.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:15.292Z,1516657335.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:15.451Z,1516657335.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:15.702Z,1516657335.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:16.101Z,1516657336.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:16.247Z,1516657336.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:16.501Z,1516657336.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:16.888Z,1516657336.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:17.051Z,1516657337.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:17.292Z,1516657337.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:17.495Z,1516657337.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:17.706Z,1516657337.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:18.088Z,1516657338.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:18.291Z,1516657338.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:18.496Z,1516657338.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:18.901Z,1516657338.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:19.087Z,1516657339.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:19.305Z,1516657339.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:19.701Z,1516657339.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:19.883Z,1516657339.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:20.091Z,1516657340.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:20.488Z,1516657340.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:20.679Z,1516657340.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:20.896Z,1516657340.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:21.292Z,1516657341.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:21.475Z,1516657341.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:21.708Z,1516657341.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:21.887Z,1516657341.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:22.112Z,1516657342.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:22.291Z,1516657342.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:22.512Z,1516657342.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:22.904Z,1516657342.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:23.087Z,1516657343.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:23.294Z,1516657343.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:23.491Z,1516657343.491 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:23.702Z,1516657343.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:24.104Z,1516657344.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:24.287Z,1516657344.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:24.495Z,1516657344.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:24.909Z,1516657344.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:25.083Z,1516657345.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:25.316Z,1516657345.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:25.487Z,1516657345.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:25.712Z,1516657345.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:26.106Z,1516657346.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:26.283Z,1516657346.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:26.500Z,1516657346.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:26.896Z,1516657346.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:27.081Z,1516657347.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:27.304Z,1516657347.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:27.487Z,1516657347.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:27.701Z,1516657347.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:28.109Z,1516657348.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:28.283Z,1516657348.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:28.504Z,1516657348.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:28.896Z,1516657348.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:29.082Z,1516657349.082 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:29.303Z,1516657349.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:29.487Z,1516657349.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:29.704Z,1516657349.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:30.100Z,1516657350.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:30.284Z,1516657350.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:30.496Z,1516657350.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:30.909Z,1516657350.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:30.912Z,1516657350.912 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-22T21:37:30.8Z
2018-01-22T21:42:30.913Z,1516657350.913 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:42:30.913Z,1516657350.913 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-01-22T21:42:31.081Z,1516657351.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:31.309Z,1516657351.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:31.523Z,1516657351.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:31.820Z,1516657351.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:32.319Z,1516657352.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:33.115Z,1516657353.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:33.835Z,1516657353.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:34.632Z,1516657354.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:34.993Z,1516657354.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:35.097Z,1516657355.097 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180122T180533/Courier0080.lzma
2018-01-22T21:42:35.150Z,1516657355.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:35.444Z,1516657355.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:35.506Z,1516657355.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:35.840Z,1516657355.840 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Courier0080.lzma.bak
2018-01-22T21:42:35.840Z,1516657355.840 [DataOverHttps](INFO): SBD MOMSN=7751995
2018-01-22T21:42:35.847Z,1516657355.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:35.912Z,1516657355.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:36.509Z,1516657356.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:36.643Z,1516657356.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:36.694Z,1516657356.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:37.440Z,1516657357.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:37.843Z,1516657357.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:38.640Z,1516657358.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:39.435Z,1516657359.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:39.839Z,1516657359.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:39.977Z,1516657359.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:40.099Z,1516657360.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:40.482Z,1516657360.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:40.636Z,1516657360.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:40.885Z,1516657360.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:41.284Z,1516657361.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:41.431Z,1516657361.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:41.681Z,1516657361.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:41.835Z,1516657361.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:42.631Z,1516657362.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:43.427Z,1516657363.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:43.831Z,1516657363.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:44.627Z,1516657364.627 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:44.912Z,1516657364.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:44.975Z,1516657364.975 [DataOverHttps](INFO): Sending 128 bytes from file Logs/20180122T180533/Express0081.lzma
2018-01-22T21:42:45.038Z,1516657365.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:45.421Z,1516657365.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:45.423Z,1516657365.423 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:45.757Z,1516657365.757 [DataOverHttps](INFO): Moved sent file to Logs/20180122T180533/Express0081.lzma.bak
2018-01-22T21:42:45.757Z,1516657365.757 [DataOverHttps](INFO): SBD MOMSN=7751997
2018-01-22T21:42:45.822Z,1516657365.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:45.827Z,1516657365.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:46.402Z,1516657366.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:46.405Z,1516657366.405 [Default:CheckIn:Read_Iridium] Stopped
2018-01-22T21:42:46.405Z,1516657366.405 [Default:CheckIn:C.Wait] Running Loop=1
2018-01-22T21:42:46.405Z,1516657366.405 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-01-22T21:42:46.589Z,1516657366.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:46.623Z,1516657366.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:47.421Z,1516657367.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:47.847Z,1516657367.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:48.643Z,1516657368.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:49.439Z,1516657369.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:49.869Z,1516657369.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:49.892Z,1516657369.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:50.032Z,1516657370.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:50.382Z,1516657370.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:50.663Z,1516657370.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:50.789Z,1516657370.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:51.180Z,1516657371.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:51.461Z,1516657371.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:51.572Z,1516657371.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:51.869Z,1516657371.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:51.958Z,1516657371.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:52.360Z,1516657372.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:52.663Z,1516657372.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:52.786Z,1516657372.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:53.165Z,1516657373.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:53.459Z,1516657373.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:53.582Z,1516657373.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:53.863Z,1516657373.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:53.960Z,1516657373.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:54.360Z,1516657374.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:54.659Z,1516657374.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:54.760Z,1516657374.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:55.160Z,1516657375.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:55.455Z,1516657375.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:55.557Z,1516657375.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:55.859Z,1516657375.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:56.003Z,1516657376.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:56.385Z,1516657376.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:56.655Z,1516657376.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:56.766Z,1516657376.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:57.157Z,1516657377.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:57.451Z,1516657377.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:57.564Z,1516657377.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:57.564Z,1516657377.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-01-22T21:42:57.564Z,1516657377.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:42:57.565Z,1516657377.565 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:57.566Z,1516657377.566 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-01-22T21:42:57.566Z,1516657377.566 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:42:57.568Z,1516657377.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:57.568Z,1516657377.568 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-01-22T21:42:57.568Z,1516657377.568 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:42:57.595Z,1516657377.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:42:57.596Z,1516657377.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:42:57.596Z,1516657377.596 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:42:57.855Z,1516657377.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:57.978Z,1516657377.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:42:57.978Z,1516657377.978 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-01-22T21:42:57.978Z,1516657377.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:42:57.978Z,1516657377.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-01-22T21:42:57.979Z,1516657377.979 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:42:57.979Z,1516657377.979 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-01-22T21:42:58.360Z,1516657378.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:42:58.360Z,1516657378.360 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:42:58.361Z,1516657378.361 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:42:58.361Z,1516657378.361 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:42:58.361Z,1516657378.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:42:58.362Z,1516657378.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:42:58.362Z,1516657378.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:42:58.363Z,1516657378.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:42:58.363Z,1516657378.363 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:42:58.651Z,1516657378.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:58.776Z,1516657378.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:59.214Z,1516657379.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:59.447Z,1516657379.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:59.609Z,1516657379.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:42:59.851Z,1516657379.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:42:59.971Z,1516657379.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:00.364Z,1516657380.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:00.647Z,1516657380.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:00.761Z,1516657380.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:01.169Z,1516657381.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:01.445Z,1516657381.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:01.572Z,1516657381.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:01.863Z,1516657381.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:01.974Z,1516657381.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:02.373Z,1516657382.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:02.659Z,1516657382.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:02.785Z,1516657382.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:03.168Z,1516657383.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:03.456Z,1516657383.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:03.568Z,1516657383.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:03.863Z,1516657383.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:03.965Z,1516657383.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:04.372Z,1516657384.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:04.662Z,1516657384.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:04.776Z,1516657384.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:05.181Z,1516657385.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:05.455Z,1516657385.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:05.582Z,1516657385.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:05.859Z,1516657385.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:05.951Z,1516657385.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:06.356Z,1516657386.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:06.656Z,1516657386.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:06.752Z,1516657386.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:07.187Z,1516657387.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:07.451Z,1516657387.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:07.560Z,1516657387.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:07.855Z,1516657387.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:07.986Z,1516657387.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:08.369Z,1516657388.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:08.651Z,1516657388.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:08.772Z,1516657388.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:09.194Z,1516657389.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:09.447Z,1516657389.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:09.568Z,1516657389.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:09.851Z,1516657389.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:09.965Z,1516657389.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:10.369Z,1516657390.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:10.647Z,1516657390.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:10.772Z,1516657390.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:11.195Z,1516657391.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:11.443Z,1516657391.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:11.572Z,1516657391.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:11.847Z,1516657391.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:11.961Z,1516657391.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:12.368Z,1516657392.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:12.643Z,1516657392.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:12.765Z,1516657392.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:13.231Z,1516657393.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:13.439Z,1516657393.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:13.588Z,1516657393.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:13.843Z,1516657393.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:13.976Z,1516657393.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:14.377Z,1516657394.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:14.639Z,1516657394.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:14.788Z,1516657394.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:15.150Z,1516657395.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:15.437Z,1516657395.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:15.568Z,1516657395.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:15.883Z,1516657395.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:15.981Z,1516657395.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:16.356Z,1516657396.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:16.679Z,1516657396.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:16.776Z,1516657396.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:17.184Z,1516657397.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:17.477Z,1516657397.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:17.596Z,1516657397.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:17.887Z,1516657397.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:17.984Z,1516657397.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:18.360Z,1516657398.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:18.683Z,1516657398.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:18.755Z,1516657398.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:19.197Z,1516657399.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:19.479Z,1516657399.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:19.568Z,1516657399.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:19.885Z,1516657399.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:19.974Z,1516657399.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:20.373Z,1516657400.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:20.679Z,1516657400.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:20.782Z,1516657400.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:21.184Z,1516657401.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:21.475Z,1516657401.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:21.572Z,1516657401.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:21.879Z,1516657401.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:21.966Z,1516657401.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:22.370Z,1516657402.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:22.675Z,1516657402.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:22.777Z,1516657402.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:23.200Z,1516657403.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:23.471Z,1516657403.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:23.570Z,1516657403.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:23.875Z,1516657403.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:23.972Z,1516657403.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:24.352Z,1516657404.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:24.671Z,1516657404.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:24.752Z,1516657404.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:25.203Z,1516657405.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:25.467Z,1516657405.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:25.565Z,1516657405.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:25.871Z,1516657405.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:25.974Z,1516657405.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:26.383Z,1516657406.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:26.669Z,1516657406.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:26.766Z,1516657406.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:27.227Z,1516657407.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:27.463Z,1516657407.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:27.563Z,1516657407.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:27.867Z,1516657407.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:27.972Z,1516657407.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:28.359Z,1516657408.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:28.663Z,1516657408.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:28.772Z,1516657408.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:29.173Z,1516657409.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:29.461Z,1516657409.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:29.574Z,1516657409.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:29.903Z,1516657409.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:29.968Z,1516657409.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:30.368Z,1516657410.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:30.701Z,1516657410.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:30.785Z,1516657410.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:31.174Z,1516657411.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:31.497Z,1516657411.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:31.580Z,1516657411.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:31.911Z,1516657411.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:31.968Z,1516657411.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:32.377Z,1516657412.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:32.707Z,1516657412.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:32.768Z,1516657412.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:33.223Z,1516657413.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:33.505Z,1516657413.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:33.576Z,1516657413.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:33.915Z,1516657413.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:33.984Z,1516657413.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:34.376Z,1516657414.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:34.720Z,1516657414.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:34.788Z,1516657414.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:35.210Z,1516657415.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:35.515Z,1516657415.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:35.576Z,1516657415.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:35.919Z,1516657415.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:35.963Z,1516657415.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:36.365Z,1516657416.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:36.715Z,1516657416.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:36.767Z,1516657416.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:37.219Z,1516657417.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:37.511Z,1516657417.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:37.577Z,1516657417.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:37.915Z,1516657417.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:37.963Z,1516657417.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:38.358Z,1516657418.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:38.724Z,1516657418.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:38.775Z,1516657418.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:39.223Z,1516657419.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:39.519Z,1516657419.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:39.588Z,1516657419.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:39.923Z,1516657419.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:40.008Z,1516657420.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:40.370Z,1516657420.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:40.719Z,1516657420.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:40.780Z,1516657420.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:41.241Z,1516657421.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:41.515Z,1516657421.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:41.588Z,1516657421.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:41.919Z,1516657421.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:41.953Z,1516657421.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:42.353Z,1516657422.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:42.715Z,1516657422.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:42.768Z,1516657422.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:43.165Z,1516657423.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:43.519Z,1516657423.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:43.585Z,1516657423.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:43.935Z,1516657423.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:43.964Z,1516657423.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:44.367Z,1516657424.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:44.731Z,1516657424.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:44.769Z,1516657424.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:45.166Z,1516657425.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:45.533Z,1516657425.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:45.570Z,1516657425.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:45.939Z,1516657425.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:45.965Z,1516657425.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:46.360Z,1516657426.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:46.735Z,1516657426.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:46.774Z,1516657426.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:47.236Z,1516657427.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:47.531Z,1516657427.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:47.935Z,1516657427.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:48.731Z,1516657428.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:49.527Z,1516657429.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:49.931Z,1516657429.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:50.484Z,1516657430.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:50.600Z,1516657430.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:50.727Z,1516657430.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:50.964Z,1516657430.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:51.381Z,1516657431.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:51.523Z,1516657431.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:51.751Z,1516657431.751 [PNI_TCM](ERROR): CRC does not match. Expected:0x16025 got:0x19513
2018-01-22T21:43:51.778Z,1516657431.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:51.927Z,1516657431.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:52.160Z,1516657432.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:52.575Z,1516657432.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:52.726Z,1516657432.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:52.968Z,1516657432.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:53.368Z,1516657433.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:53.527Z,1516657433.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:53.765Z,1516657433.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:53.931Z,1516657433.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:54.172Z,1516657434.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:54.570Z,1516657434.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:54.730Z,1516657434.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:54.960Z,1516657434.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:55.358Z,1516657435.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:55.524Z,1516657435.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:55.771Z,1516657435.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:55.927Z,1516657435.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:56.172Z,1516657436.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:56.568Z,1516657436.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:56.724Z,1516657436.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:56.964Z,1516657436.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:57.359Z,1516657437.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:57.521Z,1516657437.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:57.777Z,1516657437.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:57.939Z,1516657437.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:58.171Z,1516657438.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:58.580Z,1516657438.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:58.735Z,1516657438.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:58.961Z,1516657438.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:59.371Z,1516657439.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:59.533Z,1516657439.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:43:59.785Z,1516657439.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:43:59.943Z,1516657439.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:00.176Z,1516657440.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:00.583Z,1516657440.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:00.739Z,1516657440.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:00.977Z,1516657440.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:01.350Z,1516657441.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:01.535Z,1516657441.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:01.763Z,1516657441.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:01.939Z,1516657441.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:02.184Z,1516657442.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:02.584Z,1516657442.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:02.735Z,1516657442.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:02.969Z,1516657442.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:03.357Z,1516657443.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:03.531Z,1516657443.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:03.769Z,1516657443.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:03.935Z,1516657443.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:04.186Z,1516657444.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:04.567Z,1516657444.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:04.731Z,1516657444.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:04.962Z,1516657444.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:05.358Z,1516657445.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:05.529Z,1516657445.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:05.773Z,1516657445.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:05.935Z,1516657445.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:06.170Z,1516657446.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:06.577Z,1516657446.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:06.733Z,1516657446.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:06.973Z,1516657446.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:07.381Z,1516657447.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:07.527Z,1516657447.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:07.753Z,1516657447.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:07.933Z,1516657447.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:08.166Z,1516657448.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:08.582Z,1516657448.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:08.727Z,1516657448.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:08.970Z,1516657448.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:09.383Z,1516657449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:09.524Z,1516657449.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:09.783Z,1516657449.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:09.927Z,1516657449.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:10.171Z,1516657450.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:10.544Z,1516657450.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:10.724Z,1516657450.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:10.948Z,1516657450.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:11.348Z,1516657451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:11.521Z,1516657451.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:11.780Z,1516657451.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:11.959Z,1516657451.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:12.158Z,1516657452.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:12.564Z,1516657452.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:12.755Z,1516657452.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:12.964Z,1516657452.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:13.370Z,1516657453.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:13.553Z,1516657453.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:13.764Z,1516657453.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:13.963Z,1516657453.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:14.159Z,1516657454.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:14.553Z,1516657454.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:14.759Z,1516657454.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:14.976Z,1516657454.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:15.398Z,1516657455.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:15.555Z,1516657455.555 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:15.762Z,1516657455.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:15.959Z,1516657455.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:16.153Z,1516657456.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:16.568Z,1516657456.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:16.755Z,1516657456.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:16.953Z,1516657456.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:17.360Z,1516657457.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:17.551Z,1516657457.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:17.760Z,1516657457.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:17.955Z,1516657457.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:18.171Z,1516657458.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:18.565Z,1516657458.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:18.751Z,1516657458.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:18.965Z,1516657458.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:19.374Z,1516657459.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:19.549Z,1516657459.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:19.766Z,1516657459.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:19.955Z,1516657459.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:20.145Z,1516657460.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:20.548Z,1516657460.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:20.751Z,1516657460.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:20.958Z,1516657460.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:21.385Z,1516657461.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:21.547Z,1516657461.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:21.784Z,1516657461.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:21.951Z,1516657461.951 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:22.156Z,1516657462.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:22.556Z,1516657462.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:22.747Z,1516657462.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:22.952Z,1516657462.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:23.356Z,1516657463.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:23.543Z,1516657463.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:23.760Z,1516657463.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:23.947Z,1516657463.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:24.164Z,1516657464.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:24.583Z,1516657464.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:24.743Z,1516657464.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:24.965Z,1516657464.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:25.352Z,1516657465.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:25.541Z,1516657465.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:25.764Z,1516657465.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:25.979Z,1516657465.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:26.160Z,1516657466.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:26.553Z,1516657466.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:26.775Z,1516657466.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:26.964Z,1516657466.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:27.365Z,1516657467.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:27.573Z,1516657467.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:27.761Z,1516657467.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:27.991Z,1516657467.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:28.156Z,1516657468.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:28.560Z,1516657468.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:28.787Z,1516657468.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:28.952Z,1516657468.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:29.356Z,1516657469.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:29.585Z,1516657469.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:29.760Z,1516657469.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:29.991Z,1516657469.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:30.167Z,1516657470.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:30.564Z,1516657470.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:30.787Z,1516657470.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:30.966Z,1516657470.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:31.360Z,1516657471.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:31.583Z,1516657471.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:31.757Z,1516657471.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:31.987Z,1516657471.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:32.164Z,1516657472.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:32.559Z,1516657472.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:32.783Z,1516657472.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:32.962Z,1516657472.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:33.369Z,1516657473.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:33.579Z,1516657473.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:33.774Z,1516657473.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:33.983Z,1516657473.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:34.168Z,1516657474.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:34.544Z,1516657474.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:34.779Z,1516657474.779 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:34.948Z,1516657474.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:35.356Z,1516657475.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:35.575Z,1516657475.575 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:35.755Z,1516657475.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:35.979Z,1516657475.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:36.158Z,1516657476.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:36.557Z,1516657476.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:36.776Z,1516657476.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:36.958Z,1516657476.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:37.361Z,1516657477.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:37.574Z,1516657477.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:37.758Z,1516657477.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:37.979Z,1516657477.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:38.157Z,1516657478.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:38.552Z,1516657478.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:38.775Z,1516657478.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:38.960Z,1516657478.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:39.368Z,1516657479.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:39.573Z,1516657479.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:39.760Z,1516657479.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:40.007Z,1516657480.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:40.160Z,1516657480.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:40.555Z,1516657480.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:40.803Z,1516657480.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:40.974Z,1516657480.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:41.356Z,1516657481.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:41.600Z,1516657481.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:41.748Z,1516657481.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:42.166Z,1516657482.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:42.395Z,1516657482.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:42.566Z,1516657482.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:42.799Z,1516657482.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:42.977Z,1516657482.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:43.357Z,1516657483.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:43.595Z,1516657483.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:43.759Z,1516657483.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:43.999Z,1516657483.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:44.165Z,1516657484.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:44.559Z,1516657484.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:44.795Z,1516657484.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:44.965Z,1516657484.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:45.312Z,1516657485.312 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-01-22T21:44:45.312Z,1516657485.312 [NAL9602] Data Fault, FailCount= 5
2018-01-22T21:44:45.312Z,1516657485.312 [NAL9602](ERROR): Data Fault
2018-01-22T21:44:45.365Z,1516657485.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:45.386Z,1516657485.386 [CBIT](ERROR): Data Fault in component: NAL9602
2018-01-22T21:44:45.386Z,1516657485.386 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-01-22T21:44:45.591Z,1516657485.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:45.712Z,1516657485.712 [NAL9602](INFO): Powering down
2018-01-22T21:44:45.769Z,1516657485.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:45.793Z,1516657485.793 [CBIT](INFO): Critical error at 20180122T214445
2018-01-22T21:44:45.995Z,1516657485.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:46.148Z,1516657486.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:46.548Z,1516657486.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:46.791Z,1516657486.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:46.953Z,1516657486.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:47.360Z,1516657487.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:47.587Z,1516657487.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:47.991Z,1516657487.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:48.787Z,1516657488.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:49.583Z,1516657489.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:49.987Z,1516657489.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:50.747Z,1516657490.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:50.783Z,1516657490.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:50.880Z,1516657490.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:51.209Z,1516657491.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:51.580Z,1516657491.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:51.628Z,1516657491.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:51.984Z,1516657491.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:52.014Z,1516657492.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:52.410Z,1516657492.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:52.780Z,1516657492.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:52.824Z,1516657492.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:53.211Z,1516657493.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:53.576Z,1516657493.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:53.657Z,1516657493.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:54.019Z,1516657494.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:54.071Z,1516657494.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:54.411Z,1516657494.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:54.811Z,1516657494.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:54.867Z,1516657494.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:55.219Z,1516657495.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:55.663Z,1516657495.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:55.664Z,1516657495.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:56.012Z,1516657496.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:56.087Z,1516657496.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:56.418Z,1516657496.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:56.811Z,1516657496.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:56.883Z,1516657496.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:57.211Z,1516657497.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:57.617Z,1516657497.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:57.679Z,1516657497.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:58.037Z,1516657498.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:58.083Z,1516657498.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:58.412Z,1516657498.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:58.807Z,1516657498.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:58.879Z,1516657498.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:44:59.212Z,1516657499.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:59.613Z,1516657499.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:44:59.675Z,1516657499.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:00.019Z,1516657500.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:00.079Z,1516657500.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:00.409Z,1516657500.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:00.810Z,1516657500.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:00.875Z,1516657500.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:01.216Z,1516657501.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:01.621Z,1516657501.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:01.671Z,1516657501.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:02.021Z,1516657502.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:02.075Z,1516657502.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:02.422Z,1516657502.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:02.821Z,1516657502.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:02.871Z,1516657502.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:03.221Z,1516657503.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:03.607Z,1516657503.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:03.667Z,1516657503.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:04.028Z,1516657504.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:04.071Z,1516657504.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:04.424Z,1516657504.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:04.807Z,1516657504.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:04.867Z,1516657504.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:05.227Z,1516657505.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:05.623Z,1516657505.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:05.663Z,1516657505.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:06.009Z,1516657506.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:06.068Z,1516657506.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:06.408Z,1516657506.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:06.808Z,1516657506.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:06.863Z,1516657506.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:07.208Z,1516657507.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:07.659Z,1516657507.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:07.676Z,1516657507.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:08.016Z,1516657508.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:08.095Z,1516657508.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:08.416Z,1516657508.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:08.808Z,1516657508.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:08.891Z,1516657508.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:09.216Z,1516657509.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:09.687Z,1516657509.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:09.689Z,1516657509.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:10.016Z,1516657510.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:10.103Z,1516657510.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:10.408Z,1516657510.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:10.816Z,1516657510.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:10.899Z,1516657510.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:11.219Z,1516657511.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:11.619Z,1516657511.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:11.695Z,1516657511.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:12.019Z,1516657512.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:12.099Z,1516657512.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:12.412Z,1516657512.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:12.820Z,1516657512.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:12.897Z,1516657512.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:13.214Z,1516657513.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:13.620Z,1516657513.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:13.691Z,1516657513.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:14.023Z,1516657514.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:14.095Z,1516657514.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:14.424Z,1516657514.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:14.816Z,1516657514.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:14.891Z,1516657514.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:15.204Z,1516657515.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:15.616Z,1516657515.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:15.687Z,1516657515.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:16.012Z,1516657516.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:16.091Z,1516657516.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:16.408Z,1516657516.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:16.808Z,1516657516.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:16.887Z,1516657516.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:17.216Z,1516657517.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:17.621Z,1516657517.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:17.683Z,1516657517.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:18.029Z,1516657518.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:18.087Z,1516657518.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:18.424Z,1516657518.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:18.808Z,1516657518.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:18.883Z,1516657518.883 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:19.207Z,1516657519.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:19.632Z,1516657519.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:19.679Z,1516657519.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:20.008Z,1516657520.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:20.083Z,1516657520.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:20.408Z,1516657520.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:20.808Z,1516657520.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:20.880Z,1516657520.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:21.207Z,1516657521.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:21.670Z,1516657521.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:21.675Z,1516657521.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:22.011Z,1516657522.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:22.099Z,1516657522.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:22.410Z,1516657522.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:22.819Z,1516657522.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:22.895Z,1516657522.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:23.216Z,1516657523.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:23.691Z,1516657523.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:23.712Z,1516657523.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:24.022Z,1516657524.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:24.124Z,1516657524.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:24.407Z,1516657524.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:24.810Z,1516657524.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:24.920Z,1516657524.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:25.216Z,1516657525.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:25.619Z,1516657525.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:25.715Z,1516657525.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:26.019Z,1516657526.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:26.119Z,1516657526.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:26.419Z,1516657526.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:26.817Z,1516657526.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:26.915Z,1516657526.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:27.216Z,1516657527.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:27.620Z,1516657527.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:27.711Z,1516657527.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:28.023Z,1516657528.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:28.115Z,1516657528.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:28.421Z,1516657528.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:28.822Z,1516657528.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:28.911Z,1516657528.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:29.221Z,1516657529.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:29.625Z,1516657529.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:29.709Z,1516657529.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:30.024Z,1516657530.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:30.115Z,1516657530.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:30.408Z,1516657530.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:30.812Z,1516657530.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:30.911Z,1516657530.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:31.207Z,1516657531.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:31.612Z,1516657531.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:31.707Z,1516657531.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:32.008Z,1516657532.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:32.111Z,1516657532.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:32.408Z,1516657532.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:32.807Z,1516657532.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:32.907Z,1516657532.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:33.206Z,1516657533.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:33.612Z,1516657533.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:33.703Z,1516657533.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:34.028Z,1516657534.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:34.107Z,1516657534.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:34.412Z,1516657534.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:34.807Z,1516657534.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:34.903Z,1516657534.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:35.206Z,1516657535.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:35.606Z,1516657535.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:35.699Z,1516657535.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:36.020Z,1516657536.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:36.119Z,1516657536.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:36.409Z,1516657536.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:36.810Z,1516657536.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:36.915Z,1516657536.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:37.218Z,1516657537.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:37.609Z,1516657537.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:37.711Z,1516657537.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:38.019Z,1516657538.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:38.115Z,1516657538.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:38.413Z,1516657538.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:38.819Z,1516657538.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:38.911Z,1516657538.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:39.211Z,1516657539.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:39.609Z,1516657539.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:39.707Z,1516657539.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:40.019Z,1516657540.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:40.111Z,1516657540.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:40.411Z,1516657540.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:40.821Z,1516657540.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:40.907Z,1516657540.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:41.212Z,1516657541.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:41.609Z,1516657541.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:41.703Z,1516657541.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:42.028Z,1516657542.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:42.107Z,1516657542.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:42.411Z,1516657542.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:42.819Z,1516657542.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:42.903Z,1516657542.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:43.220Z,1516657543.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:43.617Z,1516657543.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:43.699Z,1516657543.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:44.021Z,1516657544.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:44.103Z,1516657544.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:44.419Z,1516657544.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:44.811Z,1516657544.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:44.899Z,1516657544.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:45.210Z,1516657545.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:45.618Z,1516657545.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:45.696Z,1516657545.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:46.019Z,1516657546.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:46.099Z,1516657546.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:46.410Z,1516657546.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:46.820Z,1516657546.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:46.895Z,1516657546.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:47.220Z,1516657547.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:47.691Z,1516657547.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:47.748Z,1516657547.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:48.095Z,1516657548.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:48.891Z,1516657548.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:49.689Z,1516657549.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:50.131Z,1516657550.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:50.874Z,1516657550.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:50.887Z,1516657550.887 [CBIT](DEBUG): EFC running - data check-sum false
2018-01-22T21:45:50.927Z,1516657550.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:51.015Z,1516657551.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:51.337Z,1516657551.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:51.724Z,1516657551.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:51.782Z,1516657551.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:52.146Z,1516657552.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:52.155Z,1516657552.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:52.546Z,1516657552.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:52.947Z,1516657552.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:52.952Z,1516657552.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:53.401Z,1516657553.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:53.747Z,1516657553.747 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:53.756Z,1516657553.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:54.136Z,1516657554.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:54.151Z,1516657554.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:54.536Z,1516657554.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:54.936Z,1516657554.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:54.947Z,1516657554.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:55.412Z,1516657555.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:55.738Z,1516657555.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:55.743Z,1516657555.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:56.134Z,1516657556.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:56.147Z,1516657556.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:56.539Z,1516657556.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:56.934Z,1516657556.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:56.943Z,1516657556.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:57.408Z,1516657557.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:57.739Z,1516657557.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:57.760Z,1516657557.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:58.137Z,1516657558.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:58.143Z,1516657558.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:58.540Z,1516657558.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:58.541Z,1516657558.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-01-22T21:45:58.541Z,1516657558.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:45:58.542Z,1516657558.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:58.543Z,1516657558.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-01-22T21:45:58.543Z,1516657558.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:45:58.545Z,1516657558.545 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:45:58.545Z,1516657558.545 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-01-22T21:45:58.545Z,1516657558.545 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:45:58.556Z,1516657558.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:45:58.556Z,1516657558.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:45:58.557Z,1516657558.557 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:45:58.939Z,1516657558.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:58.962Z,1516657558.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:45:58.962Z,1516657558.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-01-22T21:45:58.967Z,1516657558.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:45:58.967Z,1516657558.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-01-22T21:45:58.967Z,1516657558.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:45:58.968Z,1516657558.968 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-01-22T21:45:59.396Z,1516657559.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:45:59.397Z,1516657559.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:45:59.397Z,1516657559.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:45:59.397Z,1516657559.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:45:59.398Z,1516657559.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:45:59.398Z,1516657559.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:45:59.399Z,1516657559.399 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:45:59.399Z,1516657559.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:45:59.399Z,1516657559.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:45:59.735Z,1516657559.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:45:59.764Z,1516657559.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:00.139Z,1516657560.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:00.156Z,1516657560.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:00.536Z,1516657560.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:00.935Z,1516657560.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:00.937Z,1516657560.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:01.364Z,1516657561.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:01.731Z,1516657561.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:01.740Z,1516657561.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:02.135Z,1516657562.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:02.138Z,1516657562.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:02.536Z,1516657562.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:02.931Z,1516657562.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:02.938Z,1516657562.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:03.344Z,1516657563.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:03.728Z,1516657563.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:03.795Z,1516657563.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:04.141Z,1516657564.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:04.171Z,1516657564.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:04.548Z,1516657564.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:04.939Z,1516657564.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:04.967Z,1516657564.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:05.348Z,1516657565.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:05.763Z,1516657565.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:05.800Z,1516657565.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:06.142Z,1516657566.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:06.183Z,1516657566.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:06.548Z,1516657566.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:06.942Z,1516657566.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:06.979Z,1516657566.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:07.403Z,1516657567.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:07.739Z,1516657567.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:07.775Z,1516657567.775 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:08.152Z,1516657568.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:08.179Z,1516657568.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:08.532Z,1516657568.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:08.936Z,1516657568.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:08.976Z,1516657568.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:09.415Z,1516657569.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:09.737Z,1516657569.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:09.771Z,1516657569.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:10.139Z,1516657570.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:10.175Z,1516657570.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:10.540Z,1516657570.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:10.940Z,1516657570.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:10.971Z,1516657570.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:11.384Z,1516657571.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:11.750Z,1516657571.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:11.767Z,1516657571.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:12.152Z,1516657572.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:12.171Z,1516657572.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:12.549Z,1516657572.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:12.948Z,1516657572.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:12.967Z,1516657572.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:13.403Z,1516657573.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:13.734Z,1516657573.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:13.763Z,1516657573.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:14.148Z,1516657574.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:14.167Z,1516657574.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:14.540Z,1516657574.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:14.938Z,1516657574.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:14.963Z,1516657574.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:15.338Z,1516657575.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:15.745Z,1516657575.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:15.759Z,1516657575.759 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:16.139Z,1516657576.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:16.163Z,1516657576.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:16.538Z,1516657576.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:16.946Z,1516657576.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:16.960Z,1516657576.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:17.338Z,1516657577.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:17.756Z,1516657577.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:17.795Z,1516657577.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:18.150Z,1516657578.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:18.219Z,1516657578.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:18.549Z,1516657578.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:18.949Z,1516657578.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:19.015Z,1516657579.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:19.350Z,1516657579.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:19.803Z,1516657579.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:19.811Z,1516657579.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:20.136Z,1516657580.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:20.215Z,1516657580.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:20.540Z,1516657580.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:20.934Z,1516657580.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:21.011Z,1516657581.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:21.334Z,1516657581.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:21.742Z,1516657581.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:21.808Z,1516657581.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:22.142Z,1516657582.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:22.211Z,1516657582.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:22.538Z,1516657582.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:22.940Z,1516657582.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:23.007Z,1516657583.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:23.339Z,1516657583.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:23.738Z,1516657583.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:23.803Z,1516657583.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:24.150Z,1516657584.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:24.207Z,1516657584.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:24.539Z,1516657584.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:24.938Z,1516657584.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:25.003Z,1516657585.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:25.348Z,1516657585.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:25.745Z,1516657585.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:25.799Z,1516657585.799 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:26.145Z,1516657586.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:26.203Z,1516657586.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:26.550Z,1516657586.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:26.949Z,1516657586.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:26.999Z,1516657586.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:27.348Z,1516657587.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:27.738Z,1516657587.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:27.795Z,1516657587.795 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:28.159Z,1516657588.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:28.199Z,1516657588.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:28.534Z,1516657588.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:28.934Z,1516657588.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:28.996Z,1516657588.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:29.334Z,1516657589.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:29.740Z,1516657589.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:29.791Z,1516657589.791 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:30.134Z,1516657590.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:30.196Z,1516657590.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:30.534Z,1516657590.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:30.933Z,1516657590.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:30.991Z,1516657590.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:31.336Z,1516657591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:31.781Z,1516657591.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:31.788Z,1516657591.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:32.138Z,1516657592.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:32.231Z,1516657592.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:32.534Z,1516657592.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:32.938Z,1516657592.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:33.027Z,1516657593.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:33.334Z,1516657593.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:33.797Z,1516657593.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:33.823Z,1516657593.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:34.152Z,1516657594.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:34.231Z,1516657594.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:34.540Z,1516657594.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:34.946Z,1516657594.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:35.027Z,1516657595.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:35.339Z,1516657595.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:35.745Z,1516657595.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:35.823Z,1516657595.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:36.149Z,1516657596.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:36.227Z,1516657596.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:36.544Z,1516657596.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:36.947Z,1516657596.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:37.023Z,1516657597.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:37.341Z,1516657597.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:37.747Z,1516657597.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:37.819Z,1516657597.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:38.145Z,1516657598.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:38.223Z,1516657598.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:38.547Z,1516657598.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:38.945Z,1516657598.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:39.019Z,1516657599.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:39.345Z,1516657599.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:39.754Z,1516657599.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:39.815Z,1516657599.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:40.145Z,1516657600.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:40.219Z,1516657600.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:40.549Z,1516657600.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:40.951Z,1516657600.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:41.015Z,1516657601.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:41.332Z,1516657601.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:41.746Z,1516657601.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:41.811Z,1516657601.811 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:42.155Z,1516657602.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:42.215Z,1516657602.215 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:42.540Z,1516657602.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:42.985Z,1516657602.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:43.012Z,1516657603.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:43.347Z,1516657603.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:43.744Z,1516657603.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:43.807Z,1516657603.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:44.152Z,1516657604.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:44.211Z,1516657604.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:44.548Z,1516657604.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:44.943Z,1516657604.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:45.007Z,1516657605.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:45.345Z,1516657605.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:45.358Z,1516657605.358 [CBIT](INFO): Clearing failed state for component NAL9602
2018-01-22T21:46:45.358Z,1516657605.358 [NAL9602] No Fault, FailCount= 5
2018-01-22T21:46:45.700Z,1516657605.700 [NAL9602](INFO): Powering up NAL9602
2018-01-22T21:46:45.803Z,1516657605.803 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:45.808Z,1516657605.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:46.156Z,1516657606.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:46.251Z,1516657606.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:46.562Z,1516657606.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:46.932Z,1516657606.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:47.047Z,1516657607.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:47.337Z,1516657607.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:47.781Z,1516657607.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:47.843Z,1516657607.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:48.247Z,1516657608.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:49.043Z,1516657609.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:49.839Z,1516657609.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:50.243Z,1516657610.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:51.036Z,1516657611.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:51.039Z,1516657611.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:51.172Z,1516657611.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:51.531Z,1516657611.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:51.835Z,1516657611.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:51.936Z,1516657611.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:52.239Z,1516657612.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:52.305Z,1516657612.305 [BPC1](ERROR): Failed to receive battery data
2018-01-22T21:46:52.305Z,1516657612.305 [BPC1] Communications Fault, FailCount= 9
2018-01-22T21:46:52.305Z,1516657612.305 [BPC1](ERROR): Communications Fault
2018-01-22T21:46:52.312Z,1516657612.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:52.350Z,1516657612.350 [CBIT](ERROR): Communications Fault in component: BPC1
2018-01-22T21:46:52.716Z,1516657612.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:53.035Z,1516657613.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:53.132Z,1516657613.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:53.541Z,1516657613.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:53.554Z,1516657613.554 [CBIT](INFO): Clearing failed state for component BPC1
2018-01-22T21:46:53.554Z,1516657613.554 [BPC1] No Fault, FailCount= 9
2018-01-22T21:46:53.831Z,1516657613.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:53.980Z,1516657613.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:54.235Z,1516657614.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:54.317Z,1516657614.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:54.728Z,1516657614.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:55.031Z,1516657615.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:55.128Z,1516657615.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:55.531Z,1516657615.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:55.827Z,1516657615.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:55.929Z,1516657615.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:56.231Z,1516657616.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:56.338Z,1516657616.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:56.681Z,1516657616.681 [NAL9602](INFO): NAL9602 initialized
2018-01-22T21:46:56.736Z,1516657616.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:57.027Z,1516657617.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:57.132Z,1516657617.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:57.603Z,1516657617.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:57.823Z,1516657617.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:57.941Z,1516657617.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:58.227Z,1516657618.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:58.345Z,1516657618.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:58.735Z,1516657618.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:59.024Z,1516657619.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:59.148Z,1516657619.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:59.554Z,1516657619.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:46:59.820Z,1516657619.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:46:59.972Z,1516657619.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:00.247Z,1516657620.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:00.375Z,1516657620.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:00.733Z,1516657620.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:01.043Z,1516657621.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:01.172Z,1516657621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:01.525Z,1516657621.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:01.839Z,1516657621.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:01.937Z,1516657621.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:02.243Z,1516657622.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:02.341Z,1516657622.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:02.742Z,1516657622.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:03.039Z,1516657623.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:03.156Z,1516657623.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:03.553Z,1516657623.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:03.835Z,1516657623.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:03.998Z,1516657623.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:04.239Z,1516657624.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:04.340Z,1516657624.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:04.733Z,1516657624.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:05.035Z,1516657625.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:05.126Z,1516657625.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:05.572Z,1516657625.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:05.831Z,1516657625.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:05.972Z,1516657625.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:06.235Z,1516657626.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:06.344Z,1516657626.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:06.747Z,1516657626.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:07.032Z,1516657627.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:07.144Z,1516657627.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:07.556Z,1516657627.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:07.827Z,1516657627.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:07.933Z,1516657627.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:08.231Z,1516657628.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:08.344Z,1516657628.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:08.743Z,1516657628.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:09.027Z,1516657629.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:09.169Z,1516657629.169 [BPC1](INFO): Initialized
2018-01-22T21:47:09.193Z,1516657629.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:09.537Z,1516657629.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:09.823Z,1516657629.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:09.929Z,1516657629.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:10.227Z,1516657630.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:10.325Z,1516657630.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:10.721Z,1516657630.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:11.023Z,1516657631.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:11.128Z,1516657631.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:11.578Z,1516657631.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:11.819Z,1516657631.819 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:11.929Z,1516657631.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:12.223Z,1516657632.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:12.337Z,1516657632.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:12.708Z,1516657632.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:13.019Z,1516657633.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:13.112Z,1516657633.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:13.516Z,1516657633.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:13.817Z,1516657633.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:13.937Z,1516657633.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:14.247Z,1516657634.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:14.336Z,1516657634.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:14.737Z,1516657634.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:15.043Z,1516657635.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:15.137Z,1516657635.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:15.516Z,1516657635.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:15.841Z,1516657635.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:15.940Z,1516657635.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:16.247Z,1516657636.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:16.329Z,1516657636.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:16.719Z,1516657636.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:17.043Z,1516657637.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:17.128Z,1516657637.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:17.561Z,1516657637.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:17.841Z,1516657637.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:17.930Z,1516657637.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:18.249Z,1516657638.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:18.333Z,1516657638.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:18.721Z,1516657638.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:19.043Z,1516657639.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:19.120Z,1516657639.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:19.570Z,1516657639.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:19.839Z,1516657639.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:19.926Z,1516657639.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:20.243Z,1516657640.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:20.340Z,1516657640.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:20.740Z,1516657640.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:21.039Z,1516657641.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:21.134Z,1516657641.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:21.561Z,1516657641.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:21.837Z,1516657641.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:21.928Z,1516657641.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:22.243Z,1516657642.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:22.328Z,1516657642.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:22.731Z,1516657642.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:23.040Z,1516657643.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:23.132Z,1516657643.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:23.582Z,1516657643.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:23.835Z,1516657643.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:23.940Z,1516657643.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:24.239Z,1516657644.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:24.340Z,1516657644.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:24.724Z,1516657644.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:25.035Z,1516657645.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:25.111Z,1516657645.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:25.567Z,1516657645.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:25.831Z,1516657645.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:25.933Z,1516657645.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:26.235Z,1516657646.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:26.327Z,1516657646.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:26.727Z,1516657646.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:27.031Z,1516657647.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:27.129Z,1516657647.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:27.518Z,1516657647.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:27.829Z,1516657647.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:27.926Z,1516657647.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:28.290Z,1516657648.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:28.320Z,1516657648.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:28.720Z,1516657648.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:29.111Z,1516657649.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:29.151Z,1516657649.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:29.207Z,1516657649.207 [CommandLine](IMPORTANT): got command configSet list
2018-01-22T21:47:29.208Z,1516657649.208 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-01-22T21:47:29.211Z,1516657649.211 [CommandLine](IMPORTANT): Depth_Keller.loadAtStartup=0 bool;

2018-01-22T21:47:29.527Z,1516657649.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:29.907Z,1516657649.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:29.929Z,1516657649.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:30.311Z,1516657650.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:30.327Z,1516657650.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:30.715Z,1516657650.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:31.107Z,1516657651.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:31.124Z,1516657651.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:31.578Z,1516657651.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:31.903Z,1516657651.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:31.921Z,1516657651.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:32.307Z,1516657652.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:32.328Z,1516657652.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:32.727Z,1516657652.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:33.105Z,1516657653.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:33.127Z,1516657653.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:33.579Z,1516657653.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:33.902Z,1516657653.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:33.931Z,1516657653.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:34.307Z,1516657654.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:34.320Z,1516657654.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:34.721Z,1516657654.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:35.104Z,1516657655.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:35.124Z,1516657655.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:35.574Z,1516657655.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:35.899Z,1516657655.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:35.929Z,1516657655.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:36.303Z,1516657656.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:36.336Z,1516657656.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:36.718Z,1516657656.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:37.100Z,1516657657.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:37.127Z,1516657657.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:37.589Z,1516657657.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:37.895Z,1516657657.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:37.936Z,1516657657.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:38.299Z,1516657658.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:38.337Z,1516657658.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:38.740Z,1516657658.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:39.095Z,1516657659.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:39.148Z,1516657659.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:39.568Z,1516657659.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:39.892Z,1516657659.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:39.944Z,1516657659.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:40.295Z,1516657660.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:40.313Z,1516657660.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:40.720Z,1516657660.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:41.093Z,1516657661.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:41.116Z,1516657661.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:41.523Z,1516657661.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:41.887Z,1516657661.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:41.958Z,1516657661.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:42.307Z,1516657662.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:42.352Z,1516657662.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:42.720Z,1516657662.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:43.103Z,1516657663.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:43.118Z,1516657663.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:43.520Z,1516657663.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:43.900Z,1516657663.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:43.930Z,1516657663.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:44.327Z,1516657664.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:44.339Z,1516657664.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:44.784Z,1516657664.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:45.127Z,1516657665.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:45.135Z,1516657665.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:45.579Z,1516657665.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:45.928Z,1516657665.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:45.931Z,1516657665.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:46.327Z,1516657666.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:46.335Z,1516657666.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:46.726Z,1516657666.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:46.730Z,1516657666.730 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-01-22T21:47:46.730Z,1516657666.730 [Default:CheckIn:C.Wait] Stopped
2018-01-22T21:47:46.730Z,1516657666.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-01-22T21:47:46.731Z,1516657666.731 [Default:CheckIn:D] Running Loop=1
2018-01-22T21:47:47.132Z,1516657667.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:47.133Z,1516657667.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:47.136Z,1516657667.136 [Default:CheckIn:D] Stopped
2018-01-22T21:47:47.136Z,1516657667.136 [Default:CheckIn:E] Running Loop=1
2018-01-22T21:47:47.591Z,1516657667.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:47.603Z,1516657667.603 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.374137 min 
2018-01-22T21:47:47.603Z,1516657667.603 [Default:CheckIn:E] Stopped
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn] Stopped
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn](INFO): Running loop #21
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn] Running Loop=21
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-01-22T21:47:47.604Z,1516657667.604 [Default:CheckIn:Read_GPS] Running Loop=1
2018-01-22T21:47:47.927Z,1516657667.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:47.960Z,1516657667.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:48.331Z,1516657668.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:49.127Z,1516657669.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:49.923Z,1516657669.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:50.327Z,1516657670.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:51.124Z,1516657671.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:51.210Z,1516657671.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:51.329Z,1516657671.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:51.703Z,1516657671.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:51.919Z,1516657671.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:52.084Z,1516657672.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:52.323Z,1516657672.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:52.477Z,1516657672.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:52.883Z,1516657672.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:53.120Z,1516657673.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:53.283Z,1516657673.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:53.684Z,1516657673.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:53.915Z,1516657673.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:54.083Z,1516657674.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:54.319Z,1516657674.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:54.488Z,1516657674.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:54.877Z,1516657674.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:55.115Z,1516657675.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:55.289Z,1516657675.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:55.696Z,1516657675.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:55.911Z,1516657675.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:56.105Z,1516657676.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:56.315Z,1516657676.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:56.487Z,1516657676.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:56.884Z,1516657676.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:57.111Z,1516657677.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:57.283Z,1516657677.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:57.688Z,1516657677.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:57.911Z,1516657677.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:58.093Z,1516657678.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:58.315Z,1516657678.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:58.478Z,1516657678.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:58.882Z,1516657678.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:59.111Z,1516657679.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:47:59.296Z,1516657679.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:59.689Z,1516657679.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:47:59.909Z,1516657679.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:00.096Z,1516657680.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:00.315Z,1516657680.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:00.488Z,1516657680.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:00.883Z,1516657680.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:01.111Z,1516657681.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:01.291Z,1516657681.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:01.704Z,1516657681.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:01.907Z,1516657681.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:02.096Z,1516657682.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:02.311Z,1516657682.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:02.488Z,1516657682.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:02.872Z,1516657682.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:03.107Z,1516657683.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:03.294Z,1516657683.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:03.697Z,1516657683.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:03.903Z,1516657683.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:04.094Z,1516657684.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:04.307Z,1516657684.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:04.476Z,1516657684.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:04.876Z,1516657684.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:05.103Z,1516657685.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:05.286Z,1516657685.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:05.705Z,1516657685.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:05.899Z,1516657685.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:06.085Z,1516657686.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:06.303Z,1516657686.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:06.481Z,1516657686.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:06.874Z,1516657686.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:07.099Z,1516657687.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:07.290Z,1516657687.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:07.687Z,1516657687.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:07.895Z,1516657687.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:08.084Z,1516657688.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:08.299Z,1516657688.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:08.474Z,1516657688.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:08.887Z,1516657688.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:09.095Z,1516657689.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:09.288Z,1516657689.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:09.689Z,1516657689.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:09.893Z,1516657689.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:10.088Z,1516657690.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:10.335Z,1516657690.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:10.477Z,1516657690.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:10.884Z,1516657690.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:11.131Z,1516657691.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:11.288Z,1516657691.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:11.688Z,1516657691.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:11.929Z,1516657691.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:12.084Z,1516657692.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:12.339Z,1516657692.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:12.479Z,1516657692.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:12.884Z,1516657692.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:13.135Z,1516657693.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:13.289Z,1516657693.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:13.696Z,1516657693.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:13.931Z,1516657693.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:14.096Z,1516657694.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:14.335Z,1516657694.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:14.475Z,1516657694.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:14.884Z,1516657694.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:15.131Z,1516657695.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:15.288Z,1516657695.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:15.692Z,1516657695.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:15.927Z,1516657695.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:16.089Z,1516657696.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:16.331Z,1516657696.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:16.484Z,1516657696.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:16.875Z,1516657696.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:17.127Z,1516657697.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:17.289Z,1516657697.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:17.692Z,1516657697.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:17.924Z,1516657697.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:18.088Z,1516657698.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:18.327Z,1516657698.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:18.488Z,1516657698.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:18.876Z,1516657698.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:19.125Z,1516657699.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:19.290Z,1516657699.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:19.690Z,1516657699.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:19.919Z,1516657699.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:20.096Z,1516657700.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:20.323Z,1516657700.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:20.480Z,1516657700.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:20.880Z,1516657700.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:21.121Z,1516657701.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:21.290Z,1516657701.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:21.698Z,1516657701.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:21.915Z,1516657701.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:22.104Z,1516657702.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:22.319Z,1516657702.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:22.476Z,1516657702.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:22.876Z,1516657702.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:23.115Z,1516657703.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:23.298Z,1516657703.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:23.697Z,1516657703.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:23.913Z,1516657703.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:24.077Z,1516657704.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:24.351Z,1516657704.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:24.472Z,1516657704.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:24.872Z,1516657704.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:25.147Z,1516657705.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:25.297Z,1516657705.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:25.690Z,1516657705.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:25.945Z,1516657705.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:26.078Z,1516657706.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:26.355Z,1516657706.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:26.480Z,1516657706.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:26.873Z,1516657706.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:27.151Z,1516657707.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:27.272Z,1516657707.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:27.701Z,1516657707.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:27.947Z,1516657707.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:28.098Z,1516657708.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:28.351Z,1516657708.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:28.486Z,1516657708.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:28.874Z,1516657708.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:29.147Z,1516657709.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:29.276Z,1516657709.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:29.675Z,1516657709.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:29.943Z,1516657709.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:30.079Z,1516657710.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:30.349Z,1516657710.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:30.485Z,1516657710.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:30.884Z,1516657710.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:31.143Z,1516657711.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:31.296Z,1516657711.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:31.677Z,1516657711.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:31.939Z,1516657711.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:32.087Z,1516657712.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:32.343Z,1516657712.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:32.485Z,1516657712.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:32.889Z,1516657712.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:33.139Z,1516657713.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:33.280Z,1516657713.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:33.693Z,1516657713.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:33.935Z,1516657713.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:34.102Z,1516657714.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:34.339Z,1516657714.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:34.489Z,1516657714.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:34.905Z,1516657714.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:35.135Z,1516657715.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:35.276Z,1516657715.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:35.718Z,1516657715.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:35.931Z,1516657715.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:36.101Z,1516657716.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:36.337Z,1516657716.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:36.510Z,1516657716.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:36.882Z,1516657716.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:37.131Z,1516657717.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:37.282Z,1516657717.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:37.680Z,1516657717.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:37.929Z,1516657717.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:38.074Z,1516657718.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:38.371Z,1516657718.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:38.479Z,1516657718.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:38.880Z,1516657718.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:39.167Z,1516657719.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:39.274Z,1516657719.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:39.682Z,1516657719.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:39.965Z,1516657719.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:40.094Z,1516657720.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:40.379Z,1516657720.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:40.485Z,1516657720.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:40.931Z,1516657720.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:41.175Z,1516657721.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:41.280Z,1516657721.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:41.677Z,1516657721.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:41.971Z,1516657721.971 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:42.084Z,1516657722.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:42.375Z,1516657722.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:42.492Z,1516657722.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:42.892Z,1516657722.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:43.171Z,1516657723.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:43.294Z,1516657723.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:43.686Z,1516657723.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:43.967Z,1516657723.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:44.076Z,1516657724.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:44.371Z,1516657724.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:44.476Z,1516657724.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:44.887Z,1516657724.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:45.167Z,1516657725.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:45.275Z,1516657725.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:45.696Z,1516657725.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:45.963Z,1516657725.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:46.089Z,1516657726.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:46.367Z,1516657726.367 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:46.492Z,1516657726.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:46.876Z,1516657726.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:47.163Z,1516657727.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:47.286Z,1516657727.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:47.690Z,1516657727.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:47.959Z,1516657727.959 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:48.078Z,1516657728.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:48.363Z,1516657728.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:49.159Z,1516657729.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:49.957Z,1516657729.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:50.363Z,1516657730.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:51.159Z,1516657731.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:51.321Z,1516657731.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:51.473Z,1516657731.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:51.817Z,1516657731.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:51.961Z,1516657731.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:52.201Z,1516657732.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:52.391Z,1516657732.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:52.604Z,1516657732.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:52.996Z,1516657732.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:53.187Z,1516657733.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:53.405Z,1516657733.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:53.801Z,1516657733.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:53.985Z,1516657733.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:54.218Z,1516657734.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:54.395Z,1516657734.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:54.592Z,1516657734.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:54.986Z,1516657734.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:55.191Z,1516657735.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:55.397Z,1516657735.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:55.787Z,1516657735.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:55.987Z,1516657735.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:56.196Z,1516657736.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:56.391Z,1516657736.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:56.609Z,1516657736.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:57.011Z,1516657737.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:57.187Z,1516657737.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:57.435Z,1516657737.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:57.858Z,1516657737.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:57.983Z,1516657737.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:58.196Z,1516657738.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:58.387Z,1516657738.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:58.591Z,1516657738.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:58.987Z,1516657738.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:59.183Z,1516657739.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:48:59.404Z,1516657739.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:59.404Z,1516657739.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-01-22T21:48:59.404Z,1516657739.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-01-22T21:48:59.406Z,1516657739.406 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:59.406Z,1516657739.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-01-22T21:48:59.406Z,1516657739.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-01-22T21:48:59.408Z,1516657739.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:48:59.408Z,1516657739.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-01-22T21:48:59.408Z,1516657739.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-01-22T21:48:59.479Z,1516657739.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-01-22T21:48:59.479Z,1516657739.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-01-22T21:48:59.479Z,1516657739.479 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-01-22T21:48:59.817Z,1516657739.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-01-22T21:48:59.817Z,1516657739.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-01-22T21:48:59.817Z,1516657739.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-01-22T21:48:59.817Z,1516657739.817 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-01-22T21:48:59.818Z,1516657739.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-01-22T21:48:59.818Z,1516657739.818 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-01-22T21:48:59.982Z,1516657739.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:00.215Z,1516657740.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-01-22T21:49:00.215Z,1516657740.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:49:00.215Z,1516657740.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:49:00.216Z,1516657740.216 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-01-22T21:49:00.216Z,1516657740.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:49:00.216Z,1516657740.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:49:00.217Z,1516657740.217 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-01-22T21:49:00.217Z,1516657740.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-01-22T21:49:00.218Z,1516657740.218 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-01-22T21:49:00.387Z,1516657740.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:00.600Z,1516657740.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:00.980Z,1516657740.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:01.183Z,1516657741.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:01.380Z,1516657741.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:01.799Z,1516657741.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:01.980Z,1516657741.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:02.195Z,1516657742.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:02.383Z,1516657742.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:02.601Z,1516657742.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:03.007Z,1516657743.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:03.179Z,1516657743.179 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:03.409Z,1516657743.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:03.786Z,1516657743.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:03.975Z,1516657743.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:04.200Z,1516657744.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:04.379Z,1516657744.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:04.592Z,1516657744.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:05.007Z,1516657745.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:05.175Z,1516657745.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:05.405Z,1516657745.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:05.803Z,1516657745.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:05.973Z,1516657745.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:06.205Z,1516657746.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:06.415Z,1516657746.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:06.584Z,1516657746.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:06.988Z,1516657746.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:07.211Z,1516657747.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:07.397Z,1516657747.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:07.793Z,1516657747.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:08.008Z,1516657748.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:08.201Z,1516657748.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:08.415Z,1516657748.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:08.586Z,1516657748.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:08.992Z,1516657748.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:09.211Z,1516657749.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:09.394Z,1516657749.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:09.804Z,1516657749.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:10.007Z,1516657750.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:10.219Z,1516657750.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:10.411Z,1516657750.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:10.587Z,1516657750.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:10.996Z,1516657750.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:11.207Z,1516657751.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:11.406Z,1516657751.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:11.812Z,1516657751.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:12.003Z,1516657752.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:12.201Z,1516657752.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:12.407Z,1516657752.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:12.591Z,1516657752.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:12.992Z,1516657752.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:13.203Z,1516657753.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:13.401Z,1516657753.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:13.801Z,1516657753.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:13.999Z,1516657753.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:14.198Z,1516657754.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:14.403Z,1516657754.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:14.592Z,1516657754.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:14.990Z,1516657754.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:15.199Z,1516657755.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:15.427Z,1516657755.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:15.796Z,1516657755.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:15.996Z,1516657755.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:16.218Z,1516657756.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:16.399Z,1516657756.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:16.612Z,1516657756.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:17.038Z,1516657757.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:17.198Z,1516657757.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:17.463Z,1516657757.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:17.877Z,1516657757.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:17.992Z,1516657757.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:18.236Z,1516657758.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:18.395Z,1516657758.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:18.616Z,1516657758.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:19.063Z,1516657759.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:19.192Z,1516657759.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:19.405Z,1516657759.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:19.812Z,1516657759.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:19.989Z,1516657759.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:20.214Z,1516657760.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:20.479Z,1516657760.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:20.590Z,1516657760.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:20.992Z,1516657760.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:21.275Z,1516657761.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:21.426Z,1516657761.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:21.819Z,1516657761.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:22.071Z,1516657762.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:22.216Z,1516657762.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:22.475Z,1516657762.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:22.679Z,1516657762.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:23.029Z,1516657763.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:23.272Z,1516657763.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:23.416Z,1516657763.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:23.811Z,1516657763.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:24.067Z,1516657764.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:24.225Z,1516657764.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:24.471Z,1516657764.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:24.616Z,1516657764.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:25.046Z,1516657765.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:25.268Z,1516657765.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:25.438Z,1516657765.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:25.842Z,1516657765.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:26.064Z,1516657766.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:26.201Z,1516657766.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:26.467Z,1516657766.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:26.612Z,1516657766.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:26.990Z,1516657766.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:27.263Z,1516657767.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:27.401Z,1516657767.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:27.946Z,1516657767.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:28.059Z,1516657768.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:28.216Z,1516657768.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:28.463Z,1516657768.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:28.597Z,1516657768.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:29.004Z,1516657769.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:29.259Z,1516657769.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:29.412Z,1516657769.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:29.804Z,1516657769.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:30.056Z,1516657770.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:30.207Z,1516657770.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:30.459Z,1516657770.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:30.600Z,1516657770.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:30.992Z,1516657770.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:31.256Z,1516657771.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:31.417Z,1516657771.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:31.820Z,1516657771.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:32.051Z,1516657772.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:32.208Z,1516657772.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:32.455Z,1516657772.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:32.584Z,1516657772.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:32.987Z,1516657772.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:33.251Z,1516657773.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:33.413Z,1516657773.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:33.813Z,1516657773.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:34.049Z,1516657774.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:34.211Z,1516657774.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:34.459Z,1516657774.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:34.588Z,1516657774.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:34.983Z,1516657774.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:35.256Z,1516657775.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:35.414Z,1516657775.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:35.794Z,1516657775.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:36.057Z,1516657776.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:36.190Z,1516657776.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:36.463Z,1516657776.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:36.596Z,1516657776.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:36.988Z,1516657776.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:37.259Z,1516657777.259 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:37.394Z,1516657777.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:37.794Z,1516657777.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:38.055Z,1516657778.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:38.194Z,1516657778.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:38.459Z,1516657778.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:38.594Z,1516657778.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:39.000Z,1516657779.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:39.255Z,1516657779.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:39.482Z,1516657779.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:39.792Z,1516657779.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:40.051Z,1516657780.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:40.195Z,1516657780.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:40.455Z,1516657780.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:40.599Z,1516657780.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:41.002Z,1516657781.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:41.251Z,1516657781.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:41.404Z,1516657781.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:41.792Z,1516657781.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:42.047Z,1516657782.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:42.196Z,1516657782.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:42.451Z,1516657782.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:42.615Z,1516657782.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:43.004Z,1516657783.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:43.248Z,1516657783.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:43.398Z,1516657783.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:43.816Z,1516657783.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:44.043Z,1516657784.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:44.216Z,1516657784.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:44.447Z,1516657784.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:44.637Z,1516657784.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:45.071Z,1516657785.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:45.247Z,1516657785.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:45.414Z,1516657785.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:45.853Z,1516657785.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:46.044Z,1516657786.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:46.224Z,1516657786.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:46.447Z,1516657786.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:46.600Z,1516657786.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:46.000Z,1516657787.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:47.243Z,1516657787.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:47.400Z,1516657787.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:47.797Z,1516657787.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:48.041Z,1516657788.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:48.198Z,1516657788.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:48.487Z,1516657788.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:49.283Z,1516657789.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:49.511Z,1516657789.511 [CommandLine](IMPORTANT): got command restart application
2018-01-22T21:49:50.083Z,1516657790.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:50.507Z,1516657790.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-01-22T21:49:50.518Z,1516657790.518 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:50.518Z,1516657790.518 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:50.631Z,1516657790.631 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-01-22T21:49:50.631Z,1516657790.631 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:50.632Z,1516657790.632 [CommandLine](INFO): Join timeout helper Thread ID is 1512
2018-01-22T21:49:50.639Z,1516657790.639 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-01-22T21:49:50.639Z,1516657790.639 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:50.639Z,1516657790.639 [NavChartDb](INFO): Join timeout helper Thread ID is 1513
2018-01-22T21:49:50.723Z,1516657790.723 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:50.723Z,1516657790.723 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:50.727Z,1516657790.727 [ComponentRegistry](INFO): Shutting down Rowe_600LCM ThreadHandler
2018-01-22T21:49:50.727Z,1516657790.727 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:50.727Z,1516657790.727 [Rowe_600LCM](INFO): Join timeout helper Thread ID is 1514
2018-01-22T21:49:51.303Z,1516657791.303 [Rowe_600LCM ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:51.303Z,1516657791.303 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-01-22T21:49:51.499Z,1516657791.499 [Rowe_600LCM](INFO): Powering down
2018-01-22T21:49:51.501Z,1516657791.501 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:51.515Z,1516657791.515 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-01-22T21:49:51.515Z,1516657791.515 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:51.515Z,1516657791.515 [Radio_Surface](INFO): Join timeout helper Thread ID is 1516
2018-01-22T21:49:51.695Z,1516657791.695 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:51.695Z,1516657791.695 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:51.703Z,1516657791.703 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-01-22T21:49:51.703Z,1516657791.703 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:51.703Z,1516657791.703 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1517
2018-01-22T21:49:51.717Z,1516657791.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:51.864Z,1516657791.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:52.095Z,1516657792.095 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:52.095Z,1516657792.095 [WetLabsBB2FL](INFO): Powering down
2018-01-22T21:49:52.096Z,1516657792.096 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.100Z,1516657792.100 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-01-22T21:49:52.100Z,1516657792.100 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.100Z,1516657792.100 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1518
2018-01-22T21:49:52.219Z,1516657792.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:52.471Z,1516657792.471 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:52.560Z,1516657792.560 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-01-22T21:49:52.560Z,1516657792.560 [CTD_Seabird](INFO): Powering down
2018-01-22T21:49:52.561Z,1516657792.561 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.564Z,1516657792.564 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-01-22T21:49:52.564Z,1516657792.564 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.564Z,1516657792.564 [logger](INFO): Join timeout helper Thread ID is 1520
2018-01-22T21:49:52.579Z,1516657792.579 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:52.579Z,1516657792.579 [logger ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.584Z,1516657792.584 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-01-22T21:49:52.584Z,1516657792.584 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.585Z,1516657792.585 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-01-22T21:49:52.585Z,1516657792.585 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.585Z,1516657792.585 [controlThread](INFO): Join timeout helper Thread ID is 1521
2018-01-22T21:49:52.632Z,1516657792.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-01-22T21:49:52.649Z,1516657792.649 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-01-22T21:49:52.649Z,1516657792.649 [controlThread](DEBUG): Uninitializing ControlThread
2018-01-22T21:49:52.649Z,1516657792.649 [Aanderaa_O2](INFO): Powering down
2018-01-22T21:49:52.652Z,1516657792.652 [NAL9602](INFO): Powering down
2018-01-22T21:49:52.653Z,1516657792.653 [DAT](INFO): Powering down
2018-01-22T21:49:52.771Z,1516657792.771 [PNI_TCM](INFO): Powering down
2018-01-22T21:49:52.860Z,1516657792.860 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-01-22T21:49:52.862Z,1516657792.862 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-01-22T21:49:52.862Z,1516657792.862 [MissionManager](INFO): Uninitializing Mission Default
2018-01-22T21:49:52.862Z,1516657792.862 [Default] Stopped
2018-01-22T21:49:52.863Z,1516657792.863 [Default](DEBUG): Aggregate::uninitialize Default
2018-01-22T21:49:52.863Z,1516657792.863 [Default:B.GoToSurface] Stopped
2018-01-22T21:49:52.863Z,1516657792.863 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-01-22T21:49:52.863Z,1516657792.863 [Default:CheckIn] Stopped
2018-01-22T21:49:52.863Z,1516657792.863 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-01-22T21:49:52.863Z,1516657792.863 [Default:CheckIn:Read_GPS] Stopped
2018-01-22T21:49:52.866Z,1516657792.866 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-01-22T21:49:52.867Z,1516657792.867 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-01-22T21:49:52.867Z,1516657792.867 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-01-22T21:49:52.867Z,1516657792.867 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-01-22T21:49:52.867Z,1516657792.867 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-01-22T21:49:52.868Z,1516657792.868 [BuoyancyServo](INFO): Powering down
2018-01-22T21:49:52.883Z,1516657792.883 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-01-22T21:49:52.883Z,1516657792.883 [ElevatorServo](INFO): Powering down
2018-01-22T21:49:52.884Z,1516657792.884 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-01-22T21:49:52.884Z,1516657792.884 [MassServo](INFO): Powering down
2018-01-22T21:49:52.885Z,1516657792.885 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-01-22T21:49:52.885Z,1516657792.885 [RudderServo](INFO): Powering down
2018-01-22T21:49:52.886Z,1516657792.886 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-01-22T21:49:52.886Z,1516657792.886 [ThrusterServo](INFO): Powering down
2018-01-22T21:49:52.887Z,1516657792.887 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-01-22T21:49:52.887Z,1516657792.887 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-01-22T21:49:52.887Z,1516657792.887 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-01-22T21:49:52.888Z,1516657792.888 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.972Z,1516657792.972 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:52.978Z,1516657792.978 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:53.038Z,1516657793.038 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:53.046Z,1516657793.046 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:53.091Z,1516657793.091 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-01-22T21:49:53.148Z,1516657793.148 [logger ThreadHandler](INFO): Thread cancelled.