2017-12-13T22:58:30.655Z,1513205910.655 [Supervisor](DEBUG): Initializing supervisor.
2017-12-13T22:58:30.658Z,1513205910.658 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2017-12-13T22:58:30.659Z,1513205910.659 [SyncHandler](INFO): Protected caller Thread ID is 802
2017-12-13T22:58:30.659Z,1513205910.659 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-12-13T22:58:30.660Z,1513205910.660 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2017-12-13T22:58:30.660Z,1513205910.660 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 803
2017-12-13T22:58:30.663Z,1513205910.663 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-12-13T22:58:30.674Z,1513205910.674 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-12-13T22:58:30.675Z,1513205910.675 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2017-12-13T22:58:30.675Z,1513205910.675 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 804
2017-12-13T22:58:30.676Z,1513205910.676 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-12-13T22:58:30.677Z,1513205910.677 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2017-12-13T22:58:30.677Z,1513205910.677 [logger ThreadHandler](INFO): Protected caller Thread ID is 805
2017-12-13T22:58:30.679Z,1513205910.679 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-12-13T22:58:30.679Z,1513205910.679 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-12-13T22:58:30.684Z,1513205910.684 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-12-13T22:58:30.857Z,1513205910.857 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-12-13T22:58:30.858Z,1513205910.858 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-12-13T22:58:30.989Z,1513205910.989 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-12-13T22:58:30.990Z,1513205910.990 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-12-13T22:58:31.289Z,1513205911.289 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-12-13T22:58:31.290Z,1513205911.290 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-12-13T22:58:31.418Z,1513205911.418 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-12-13T22:58:31.419Z,1513205911.419 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-12-13T22:58:31.499Z,1513205911.499 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-12-13T22:58:31.683Z,1513205911.683 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-12-13T22:58:31.683Z,1513205911.683 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-12-13T22:58:31.779Z,1513205911.779 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-12-13T22:58:31.779Z,1513205911.779 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-12-13T22:58:32.081Z,1513205912.081 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-12-13T22:58:32.083Z,1513205912.083 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-12-13T22:58:32.403Z,1513205912.403 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-12-13T22:58:32.403Z,1513205912.403 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-12-13T22:58:32.675Z,1513205912.675 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-12-13T22:58:32.676Z,1513205912.676 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-12-13T22:58:33.141Z,1513205913.141 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-12-13T22:58:33.142Z,1513205913.142 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-12-13T22:58:33.321Z,1513205913.321 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-12-13T22:58:33.322Z,1513205913.322 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-12-13T22:58:33.417Z,1513205913.417 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-12-13T22:58:33.418Z,1513205913.418 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-12-13T22:58:33.837Z,1513205913.837 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-12-13T22:58:33.838Z,1513205913.838 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-12-13T22:58:33.941Z,1513205913.941 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-12-13T22:58:33.943Z,1513205913.943 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2017-12-13T22:58:33.945Z,1513205913.945 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2017-12-13T22:58:34.258Z,1513205914.258 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-12-13T22:58:34.259Z,1513205914.259 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2017-12-13T22:58:38.087Z,1513205918.087 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2017-12-13T22:58:38.190Z,1513205918.190 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2017-12-13T22:58:38.285Z,1513205918.285 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2017-12-13T22:58:38.370Z,1513205918.370 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2017-12-13T22:58:38.518Z,1513205918.518 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2017-12-13T22:58:38.680Z,1513205918.680 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2017-12-13T22:58:38.785Z,1513205918.785 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2017-12-13T22:58:38.879Z,1513205918.879 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2017-12-13T22:58:38.965Z,1513205918.965 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2017-12-13T22:58:39.126Z,1513205919.126 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2017-12-13T22:58:39.129Z,1513205919.129 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-12-13T22:58:39.277Z,1513205919.277 [SBIT](DEBUG): Construct Startup Built In Test.
2017-12-13T22:58:39.305Z,1513205919.305 [SBIT] Loaded
2017-12-13T22:58:39.306Z,1513205919.306 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-12-13T22:58:39.306Z,1513205919.306 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-12-13T22:58:39.332Z,1513205919.332 [IBIT] Loaded
2017-12-13T22:58:39.333Z,1513205919.333 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-12-13T22:58:39.336Z,1513205919.336 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-12-13T22:58:39.482Z,1513205919.482 [CBIT] Loaded
2017-12-13T22:58:39.482Z,1513205919.482 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-12-13T22:58:39.483Z,1513205919.483 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-12-13T22:58:39.484Z,1513205919.484 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-12-13T22:58:41.566Z,1513205921.566 [VerticalControl](DEBUG): Construct VerticalControl.
2017-12-13T22:58:41.661Z,1513205921.661 [VerticalControl] Loaded
2017-12-13T22:58:41.662Z,1513205921.662 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-12-13T22:58:41.662Z,1513205921.662 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-12-13T22:58:41.720Z,1513205921.720 [HorizontalControl] Loaded
2017-12-13T22:58:41.720Z,1513205921.720 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-12-13T22:58:41.721Z,1513205921.721 [SpeedControl](DEBUG): Construct SpeedControl.
2017-12-13T22:58:41.726Z,1513205921.726 [SpeedControl] Loaded
2017-12-13T22:58:41.726Z,1513205921.726 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-12-13T22:58:41.727Z,1513205921.727 [LoopControl](DEBUG): Construct LoopControl.
2017-12-13T22:58:41.727Z,1513205921.727 [LoopControl] Loaded
2017-12-13T22:58:41.727Z,1513205921.727 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-12-13T22:58:41.728Z,1513205921.728 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-12-13T22:58:41.729Z,1513205921.729 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-12-13T22:58:41.781Z,1513205921.781 [DepthRateCalculator] Loaded
2017-12-13T22:58:41.782Z,1513205921.782 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-12-13T22:58:41.787Z,1513205921.787 [PitchRateCalculator] Loaded
2017-12-13T22:58:41.787Z,1513205921.787 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-12-13T22:58:41.802Z,1513205921.802 [SpeedCalculator] Loaded
2017-12-13T22:58:41.802Z,1513205921.802 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-12-13T22:58:41.823Z,1513205921.823 [TempGradientCalculator] Loaded
2017-12-13T22:58:41.823Z,1513205921.823 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-12-13T22:58:41.838Z,1513205921.838 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-12-13T22:58:41.838Z,1513205921.838 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-12-13T22:58:41.843Z,1513205921.843 [YawRateCalculator] Loaded
2017-12-13T22:58:41.843Z,1513205921.843 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-12-13T22:58:41.844Z,1513205921.844 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-12-13T22:58:41.844Z,1513205921.844 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-12-13T22:58:41.961Z,1513205921.961 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-12-13T22:58:41.961Z,1513205921.961 [StratificationFrontDetector](DEBUG): (re)initializing
2017-12-13T22:58:41.961Z,1513205921.961 [StratificationFrontDetector] Loaded
2017-12-13T22:58:41.962Z,1513205921.962 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-12-13T22:58:41.962Z,1513205921.962 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-12-13T22:58:41.963Z,1513205921.963 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-12-13T22:58:42.222Z,1513205922.222 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-12-13T22:58:42.223Z,1513205922.223 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-12-13T22:58:42.332Z,1513205922.332 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-12-13T22:58:42.333Z,1513205922.333 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-12-13T22:58:42.384Z,1513205922.384 [DeadReckonUsingSpeedCalculator] Loaded
2017-12-13T22:58:42.384Z,1513205922.384 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-12-13T22:58:42.436Z,1513205922.436 [DeadReckonWithRespectToSeafloor] Loaded
2017-12-13T22:58:42.436Z,1513205922.436 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-12-13T22:58:42.452Z,1513205922.452 [NavChart] Loaded
2017-12-13T22:58:42.452Z,1513205922.452 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-12-13T22:58:42.456Z,1513205922.456 [UniversalFixResidualReporter] Loaded
2017-12-13T22:58:42.456Z,1513205922.456 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-12-13T22:58:42.457Z,1513205922.457 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-12-13T22:58:42.457Z,1513205922.457 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-12-13T22:58:42.482Z,1513205922.482 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-12-13T22:58:42.484Z,1513205922.484 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-12-13T22:58:42.675Z,1513205922.675 [Aanderaa_O2] Loaded
2017-12-13T22:58:42.675Z,1513205922.675 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-12-13T22:58:42.708Z,1513205922.708 [CTD_Seabird] Loaded
2017-12-13T22:58:42.709Z,1513205922.709 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-12-13T22:58:42.710Z,1513205922.710 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406CF4E0
2017-12-13T22:58:42.710Z,1513205922.710 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 884
2017-12-13T22:58:42.726Z,1513205922.726 [ESPComponent] Loaded
2017-12-13T22:58:42.726Z,1513205922.726 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-12-13T22:58:42.740Z,1513205922.740 [PAR_Licor] Loaded
2017-12-13T22:58:42.740Z,1513205922.740 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-12-13T22:58:42.787Z,1513205922.787 [WetLabsBB2FL] Loaded
2017-12-13T22:58:42.787Z,1513205922.787 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-12-13T22:58:42.788Z,1513205922.788 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 406FF4E0
2017-12-13T22:58:42.789Z,1513205922.789 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 885
2017-12-13T22:58:42.830Z,1513205922.830 [WetLabsSeaOWL_UV_A] Loaded
2017-12-13T22:58:42.831Z,1513205922.831 [ComponentRegistry](DEBUG): Component "WetLabsSeaOWL_UV_A" handled in its own thread.
2017-12-13T22:58:42.832Z,1513205922.832 [WetLabsSeaOWL_UV_A ThreadHandler](DEBUG): Created PCaller Thread at 4072F4E0
2017-12-13T22:58:42.832Z,1513205922.832 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Protected caller Thread ID is 886
2017-12-13T22:58:42.833Z,1513205922.833 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-12-13T22:58:42.833Z,1513205922.833 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-12-13T22:58:43.354Z,1513205923.354 [DataOverHttps] Loaded
2017-12-13T22:58:43.354Z,1513205923.354 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-12-13T22:58:43.366Z,1513205923.366 [Depth_Keller] Loaded
2017-12-13T22:58:43.367Z,1513205923.367 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-12-13T22:58:43.371Z,1513205923.371 [DropWeight] Loaded
2017-12-13T22:58:43.372Z,1513205923.372 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-12-13T22:58:43.458Z,1513205923.458 [NAL9602] Loaded
2017-12-13T22:58:43.458Z,1513205923.458 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-12-13T22:58:43.463Z,1513205923.463 [Onboard] Loaded
2017-12-13T22:58:43.463Z,1513205923.463 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-12-13T22:58:43.470Z,1513205923.470 [Radio_Surface] Loaded
2017-12-13T22:58:43.470Z,1513205923.470 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-12-13T22:58:43.471Z,1513205923.471 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409734E0
2017-12-13T22:58:43.472Z,1513205923.472 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 887
2017-12-13T22:58:43.622Z,1513205923.622 [PNI_TCM] Loaded
2017-12-13T22:58:43.622Z,1513205923.622 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-12-13T22:58:43.679Z,1513205923.679 [Rowe_600LCM] Loaded
2017-12-13T22:58:43.680Z,1513205923.680 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-12-13T22:58:43.681Z,1513205923.681 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409A34E0
2017-12-13T22:58:43.681Z,1513205923.681 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 888
2017-12-13T22:58:45.403Z,1513205925.403 [BPC1] Loaded
2017-12-13T22:58:45.403Z,1513205925.403 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-12-13T22:58:45.403Z,1513205925.403 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-12-13T22:58:45.404Z,1513205925.404 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-12-13T22:58:45.517Z,1513205925.517 [BuoyancyServo] Loaded
2017-12-13T22:58:45.517Z,1513205925.517 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-12-13T22:58:45.528Z,1513205925.528 [ElevatorServo] Loaded
2017-12-13T22:58:45.529Z,1513205925.529 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-12-13T22:58:45.539Z,1513205925.539 [MassServo] Loaded
2017-12-13T22:58:45.540Z,1513205925.540 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-12-13T22:58:45.550Z,1513205925.550 [RudderServo] Loaded
2017-12-13T22:58:45.551Z,1513205925.551 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-12-13T22:58:45.561Z,1513205925.561 [ThrusterServo] Loaded
2017-12-13T22:58:45.561Z,1513205925.561 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-12-13T22:58:45.562Z,1513205925.562 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-12-13T22:58:45.562Z,1513205925.562 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-12-13T22:58:45.682Z,1513205925.682 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-12-13T22:58:45.683Z,1513205925.683 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-12-13T22:58:45.719Z,1513205925.719 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-12-13T22:58:45.723Z,1513205925.723 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-12-13T22:58:45.723Z,1513205925.723 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-12-13T22:58:45.730Z,1513205925.730 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-12-13T22:58:45.731Z,1513205925.731 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A4A4E0
2017-12-13T22:58:45.732Z,1513205925.732 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 889
2017-12-13T22:58:45.736Z,1513205925.736 [Supervisor](INFO): Main Thread ID is 796
2017-12-13T22:58:45.736Z,1513205925.736 [Supervisor](DEBUG): Running supervisor.
2017-12-13T22:58:45.737Z,1513205925.737 [CommandLine ThreadHandler](INFO): Handler Thread ID is 890
2017-12-13T22:58:45.739Z,1513205925.739 [controlThread ThreadHandler](INFO): Handler Thread ID is 891
2017-12-13T22:58:45.740Z,1513205925.740 [controlThread](DEBUG): Initializing ControlThread
2017-12-13T22:58:45.741Z,1513205925.741 [SBIT](INFO): Initialize SBIT Component.
2017-12-13T22:58:45.741Z,1513205925.741 [SBIT](IMPORTANT): git: 2017-11-20-3-gb0389ee
2017-12-13T22:58:45.741Z,1513205925.741 [SBIT](INFO): git hash: b0389eed17bddc8251b1231910f9148d930dbf7d
2017-12-13T22:58:45.742Z,1513205925.742 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2017-12-13T22:58:45.743Z,1513205925.743 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #1 PREEMPT Wed Nov 29 17:23:09 PST 2017
2017-12-13T22:58:45.744Z,1513205925.744 [SBIT](INFO): Beginning SBIT in 79.000000 seconds.
2017-12-13T22:58:45.745Z,1513205925.745 [IBIT](INFO): Initialize IBIT Component.
2017-12-13T22:58:45.745Z,1513205925.745 [CBIT](DEBUG): Initialize CBIT Component.
2017-12-13T22:58:45.746Z,1513205925.746 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2017-12-13T22:58:45.746Z,1513205925.746 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-12-13T22:58:45.746Z,1513205925.746 [logger ThreadHandler](INFO): Handler Thread ID is 892
2017-12-13T22:58:45.773Z,1513205925.773 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 893
2017-12-13T22:58:45.774Z,1513205925.774 [CTD_Seabird](INFO): Initializing
2017-12-13T22:58:45.809Z,1513205925.809 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 895
2017-12-13T22:58:45.811Z,1513205925.811 [WetLabsBB2FL](INFO): Powering down
2017-12-13T22:58:45.829Z,1513205925.829 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-12-13T22:58:45.831Z,1513205925.831 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-12-13T22:58:45.832Z,1513205925.832 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-12-13T22:58:45.833Z,1513205925.833 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-12-13T22:58:45.833Z,1513205925.833 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-12-13T22:58:45.833Z,1513205925.833 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-12-13T22:58:45.834Z,1513205925.834 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-12-13T22:58:45.834Z,1513205925.834 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-12-13T22:58:45.835Z,1513205925.835 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-12-13T22:58:45.835Z,1513205925.835 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-12-13T22:58:45.836Z,1513205925.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T22:58:45.837Z,1513205925.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T22:58:45.837Z,1513205925.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T22:58:45.838Z,1513205925.838 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T22:58:45.838Z,1513205925.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T22:58:45.839Z,1513205925.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T22:58:45.839Z,1513205925.839 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T22:58:45.840Z,1513205925.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T22:58:45.840Z,1513205925.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T22:58:45.840Z,1513205925.840 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-12-13T22:58:45.841Z,1513205925.841 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-12-13T22:58:45.854Z,1513205925.854 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-12-13T22:58:45.870Z,1513205925.870 [WetLabsSeaOWL_UV_A ThreadHandler](INFO): Handler Thread ID is 896
2017-12-13T22:58:45.889Z,1513205925.889 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 897
2017-12-13T22:58:45.895Z,1513205925.895 [Radio_Surface](INFO): Powering up
2017-12-13T22:58:45.909Z,1513205925.909 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 898
2017-12-13T22:58:45.910Z,1513205925.910 [Rowe_600LCM](INFO): Initializing
2017-12-13T22:58:45.911Z,1513205925.911 [Rowe_600LCM](INFO): Checking LCM
2017-12-13T22:58:46.061Z,1513205926.061 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-12-13T22:58:46.066Z,1513205926.066 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 899
2017-12-13T22:58:46.073Z,1513205926.073 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-12-13T22:58:46.073Z,1513205926.073 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-12-13T22:58:46.073Z,1513205926.073 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-12-13T22:58:46.073Z,1513205926.073 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-12-13T22:58:46.074Z,1513205926.074 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-12-13T22:58:46.075Z,1513205926.075 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-12-13T22:58:46.075Z,1513205926.075 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-12-13T22:58:46.075Z,1513205926.075 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-12-13T22:58:46.075Z,1513205926.075 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-12-13T22:58:46.075Z,1513205926.075 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-12-13T22:58:46.076Z,1513205926.076 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-12-13T22:58:46.114Z,1513205926.114 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-12-13T22:58:46.114Z,1513205926.114 [CTD_Seabird](INFO): Powering down
2017-12-13T22:58:46.139Z,1513205926.139 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-12-13T22:58:46.229Z,1513205926.229 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-12-13T22:58:46.332Z,1513205926.332 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-12-13T22:58:46.355Z,1513205926.355 [Default:A.Wait](DEBUG): Construct Wait.
2017-12-13T22:58:46.356Z,1513205926.356 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-12-13T22:58:46.406Z,1513205926.406 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-12-13T22:58:46.408Z,1513205926.408 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-12-13T22:58:46.450Z,1513205926.450 [Rowe_600LCM](INFO): LCM OK
2017-12-13T22:58:46.450Z,1513205926.450 [Rowe_600LCM](INFO): Powering up
2017-12-13T22:58:46.454Z,1513205926.454 [Default:E.Execute](DEBUG): Construct Execute.
2017-12-13T22:58:46.462Z,1513205926.462 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-12-13T22:58:46.467Z,1513205926.467 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-12-13T22:58:46.519Z,1513205926.519 [ESPComponent](INFO): powering down ESP
2017-12-13T22:58:46.860Z,1513205926.860 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-12-13T22:58:47.221Z,1513205927.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.221Z,1513205927.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:47.302Z,1513205927.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:47.315Z,1513205927.315 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.342Z,1513205927.342 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.447Z,1513205927.447 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:47.453Z,1513205927.453 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-12-13T22:58:47.459Z,1513205927.459 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:47.465Z,1513205927.465 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-12-13T22:58:47.475Z,1513205927.475 [MassServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:47.481Z,1513205927.481 [MassServo](DEBUG): Initializing MassServo.
2017-12-13T22:58:47.499Z,1513205927.499 [RudderServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:47.505Z,1513205927.505 [RudderServo](DEBUG): Initializing RudderServo.
2017-12-13T22:58:47.526Z,1513205927.526 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:47.533Z,1513205927.533 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-12-13T22:58:47.870Z,1513205927.870 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-12-13T22:58:47.870Z,1513205927.870 [DropWeight] Hardware Fault, FailCount= 1
2017-12-13T22:58:47.870Z,1513205927.870 [DropWeight](ERROR): Hardware Fault
2017-12-13T22:58:47.928Z,1513205927.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.929Z,1513205927.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:47.930Z,1513205927.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:47.941Z,1513205927.941 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.942Z,1513205927.942 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:47.967Z,1513205927.967 [CommandLine](FAULT): Scheduling is paused
2017-12-13T22:58:47.967Z,1513205927.967 [CBIT](INFO): Critical error at 20171213T225847
2017-12-13T22:58:47.967Z,1513205927.967 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-12-13T22:58:47.969Z,1513205927.969 [CBIT](ERROR): Hardware Fault in component: DropWeight
2017-12-13T22:58:47.970Z,1513205927.970 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-12-13T22:58:48.068Z,1513205928.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.068Z,1513205928.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:48.077Z,1513205928.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:48.078Z,1513205928.078 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.078Z,1513205928.078 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.417Z,1513205928.417 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-12-13T22:58:48.417Z,1513205928.417 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-12-13T22:58:48.417Z,1513205928.417 [BuoyancyServo] Communications Fault, FailCount= 1
2017-12-13T22:58:48.417Z,1513205928.417 [BuoyancyServo](ERROR): Communications Fault
2017-12-13T22:58:48.622Z,1513205928.622 [CBIT](INFO): Critical error at 20171213T225847
2017-12-13T22:58:48.625Z,1513205928.625 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-12-13T22:58:48.696Z,1513205928.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.696Z,1513205928.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:48.697Z,1513205928.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:48.702Z,1513205928.702 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.703Z,1513205928.703 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:48.723Z,1513205928.723 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-12-13T22:58:48.723Z,1513205928.723 [BuoyancyServo](INFO): Powering down
2017-12-13T22:58:49.088Z,1513205929.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.088Z,1513205929.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:49.090Z,1513205929.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:49.091Z,1513205929.091 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.091Z,1513205929.091 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.468Z,1513205929.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.468Z,1513205929.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:49.469Z,1513205929.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:49.477Z,1513205929.477 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.478Z,1513205929.478 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:49.953Z,1513205929.953 [Aanderaa_O2](INFO): Powering down
2017-12-13T22:58:50.076Z,1513205930.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.076Z,1513205930.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:50.077Z,1513205930.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:50.085Z,1513205930.085 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.086Z,1513205930.086 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.338Z,1513205930.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.338Z,1513205930.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:50.340Z,1513205930.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:50.340Z,1513205930.340 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.358Z,1513205930.358 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-12-13T22:58:50.498Z,1513205930.498 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-12-13T22:58:50.581Z,1513205930.581 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-12-13T22:58:50.752Z,1513205930.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:50.767Z,1513205930.767 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-12-13T22:58:50.768Z,1513205930.768 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-12-13T22:58:50.773Z,1513205930.773 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-12-13T22:58:50.773Z,1513205930.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:50.846Z,1513205930.846 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-12-13T22:58:50.846Z,1513205930.846 [BuoyancyServo] No Fault, FailCount= 1
2017-12-13T22:58:51.124Z,1513205931.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:51.125Z,1513205931.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:51.155Z,1513205931.155 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-12-13T22:58:51.156Z,1513205931.156 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-12-13T22:58:51.506Z,1513205931.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-12-13T22:58:51.507Z,1513205931.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:51.884Z,1513205931.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:52.306Z,1513205932.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:52.712Z,1513205932.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:53.099Z,1513205933.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:53.494Z,1513205933.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:53.891Z,1513205933.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:54.291Z,1513205934.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:54.686Z,1513205934.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:55.103Z,1513205935.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:55.522Z,1513205935.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:55.902Z,1513205935.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:56.319Z,1513205936.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:56.690Z,1513205936.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:57.087Z,1513205937.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:57.495Z,1513205937.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:58.026Z,1513205938.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:58.290Z,1513205938.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:58.694Z,1513205938.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:59.087Z,1513205939.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:59.491Z,1513205939.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:58:59.884Z,1513205939.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:00.287Z,1513205940.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:00.687Z,1513205940.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:01.102Z,1513205941.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:01.511Z,1513205941.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:01.903Z,1513205941.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:02.292Z,1513205942.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:02.694Z,1513205942.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:03.087Z,1513205943.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:03.491Z,1513205943.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:03.926Z,1513205943.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:04.291Z,1513205944.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:04.691Z,1513205944.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:05.083Z,1513205945.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:05.516Z,1513205945.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:05.919Z,1513205945.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:06.287Z,1513205946.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:06.698Z,1513205946.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:07.088Z,1513205947.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:07.523Z,1513205947.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:07.910Z,1513205947.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:08.295Z,1513205948.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:08.674Z,1513205948.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:09.131Z,1513205949.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:09.506Z,1513205949.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:09.910Z,1513205949.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:10.303Z,1513205950.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:10.782Z,1513205950.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:11.094Z,1513205951.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:11.502Z,1513205951.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:11.906Z,1513205951.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:12.301Z,1513205952.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:12.702Z,1513205952.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:13.123Z,1513205953.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:13.504Z,1513205953.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:13.762Z,1513205953.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T22:59:13.862Z,1513205953.862 [NAL9602](INFO): Powering up NAL9602
2017-12-13T22:59:13.943Z,1513205953.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:14.318Z,1513205954.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:14.557Z,1513205954.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T22:59:14.687Z,1513205954.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:15.118Z,1513205955.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:15.502Z,1513205955.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:15.891Z,1513205955.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:16.300Z,1513205956.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:16.682Z,1513205956.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:17.087Z,1513205957.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:17.510Z,1513205957.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:17.903Z,1513205957.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:18.297Z,1513205958.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:18.700Z,1513205958.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:19.099Z,1513205959.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:19.545Z,1513205959.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:19.914Z,1513205959.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:20.311Z,1513205960.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:20.675Z,1513205960.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:21.112Z,1513205961.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:21.511Z,1513205961.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:21.887Z,1513205961.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:22.295Z,1513205962.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:22.703Z,1513205962.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:23.095Z,1513205963.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:23.527Z,1513205963.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:23.924Z,1513205963.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:24.302Z,1513205964.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:24.699Z,1513205964.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:25.042Z,1513205965.042 [NAL9602](INFO): NAL9602 initialized
2017-12-13T22:59:25.107Z,1513205965.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:25.530Z,1513205965.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:25.918Z,1513205965.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:26.324Z,1513205966.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:26.738Z,1513205966.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:27.087Z,1513205967.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:27.488Z,1513205967.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:27.907Z,1513205967.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:28.338Z,1513205968.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:28.741Z,1513205968.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:29.093Z,1513205969.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:29.592Z,1513205969.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:29.928Z,1513205969.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:30.324Z,1513205970.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:30.726Z,1513205970.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:31.151Z,1513205971.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:31.495Z,1513205971.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:31.888Z,1513205971.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:32.300Z,1513205972.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:32.699Z,1513205972.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:33.107Z,1513205973.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:33.511Z,1513205973.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:33.962Z,1513205973.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:34.312Z,1513205974.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:34.714Z,1513205974.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:35.094Z,1513205975.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:35.499Z,1513205975.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:36.007Z,1513205976.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:36.319Z,1513205976.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:36.688Z,1513205976.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:37.095Z,1513205977.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:37.512Z,1513205977.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:37.895Z,1513205977.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:38.315Z,1513205978.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:38.703Z,1513205978.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:39.114Z,1513205979.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:39.531Z,1513205979.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:39.908Z,1513205979.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:40.310Z,1513205980.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:40.727Z,1513205980.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:41.088Z,1513205981.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:41.488Z,1513205981.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:41.884Z,1513205981.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:42.293Z,1513205982.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:42.699Z,1513205982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:43.136Z,1513205983.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:43.503Z,1513205983.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:43.911Z,1513205983.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:44.367Z,1513205984.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:44.709Z,1513205984.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:45.100Z,1513205985.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:45.478Z,1513205985.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:45.875Z,1513205985.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:46.291Z,1513205986.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:46.696Z,1513205986.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:47.095Z,1513205987.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:47.495Z,1513205987.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:47.903Z,1513205987.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:48.307Z,1513205988.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:48.754Z,1513205988.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:49.111Z,1513205989.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:49.502Z,1513205989.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:49.900Z,1513205989.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:50.320Z,1513205990.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:50.707Z,1513205990.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:51.107Z,1513205991.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:51.563Z,1513205991.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:51.907Z,1513205991.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:52.316Z,1513205992.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:52.752Z,1513205992.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:53.092Z,1513205993.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:53.571Z,1513205993.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:53.896Z,1513205993.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:54.303Z,1513205994.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:54.693Z,1513205994.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:55.084Z,1513205995.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:55.500Z,1513205995.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:55.891Z,1513205995.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:56.290Z,1513205996.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:56.716Z,1513205996.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:57.091Z,1513205997.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:57.503Z,1513205997.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:57.895Z,1513205997.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:58.279Z,1513205998.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:58.707Z,1513205998.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:59.092Z,1513205999.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:59.506Z,1513205999.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T22:59:59.924Z,1513205999.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:00.280Z,1513206000.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:00.680Z,1513206000.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:01.083Z,1513206001.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:01.480Z,1513206001.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:01.915Z,1513206001.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:02.290Z,1513206002.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:02.684Z,1513206002.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:03.166Z,1513206003.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:03.495Z,1513206003.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:03.883Z,1513206003.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:04.295Z,1513206004.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:04.694Z,1513206004.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:05.088Z,1513206005.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:05.491Z,1513206005.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:05.500Z,1513206005.500 [SBIT](IMPORTANT): Beginning Startup BIT
2017-12-13T23:00:05.513Z,1513206005.513 [CBIT](IMPORTANT): Beginning ground fault scan
2017-12-13T23:00:05.882Z,1513206005.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:06.339Z,1513206006.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:06.687Z,1513206006.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:07.091Z,1513206007.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:07.491Z,1513206007.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:08.023Z,1513206008.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:08.439Z,1513206008.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:08.502Z,1513206008.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:08.833Z,1513206008.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:09.236Z,1513206009.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:09.299Z,1513206009.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:09.644Z,1513206009.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:09.761Z,1513206009.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:10.048Z,1513206010.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:10.447Z,1513206010.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:10.558Z,1513206010.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:10.823Z,1513206010.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:11.215Z,1513206011.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:11.353Z,1513206011.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:11.631Z,1513206011.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:11.757Z,1513206011.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:12.021Z,1513206012.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:12.422Z,1513206012.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:12.554Z,1513206012.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:12.820Z,1513206012.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:13.224Z,1513206013.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:13.349Z,1513206013.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:13.667Z,1513206013.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:13.753Z,1513206013.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:14.071Z,1513206014.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:14.428Z,1513206014.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:14.553Z,1513206014.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:14.865Z,1513206014.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:15.350Z,1513206015.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:15.352Z,1513206015.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:15.667Z,1513206015.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:15.754Z,1513206015.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:16.034Z,1513206016.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:16.436Z,1513206016.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:16.549Z,1513206016.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:16.815Z,1513206016.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:16.859Z,1513206016.859 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.004591
CHAN A1 (24V): 0.126324
CHAN A2 (12V): 0.000407
CHAN A3 (5V): 0.000885
CHAN B0 (3.3V): -0.000864
CHAN B1 (3.15aV): -0.001628
CHAN B2 (3.15bV): -0.003344
CHAN B3 (GND): -0.001390
OPEN: 0.003590
Full Scale Calc: 4.765 mA, -1.589 mA
2017-12-13T23:00:17.218Z,1513206017.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:17.345Z,1513206017.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:17.615Z,1513206017.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:17.749Z,1513206017.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:18.019Z,1513206018.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:18.417Z,1513206018.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:18.545Z,1513206018.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:18.811Z,1513206018.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:19.216Z,1513206019.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:19.342Z,1513206019.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:19.653Z,1513206019.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:19.745Z,1513206019.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:20.024Z,1513206020.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:20.449Z,1513206020.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:20.541Z,1513206020.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:20.822Z,1513206020.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:21.337Z,1513206021.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:21.469Z,1513206021.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:21.741Z,1513206021.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:21.860Z,1513206021.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:22.266Z,1513206022.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:22.540Z,1513206022.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:22.656Z,1513206022.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:23.064Z,1513206023.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:23.334Z,1513206023.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:23.466Z,1513206023.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:23.737Z,1513206023.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:23.887Z,1513206023.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:24.263Z,1513206024.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:24.534Z,1513206024.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:24.666Z,1513206024.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:25.070Z,1513206025.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:25.330Z,1513206025.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:25.475Z,1513206025.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:25.748Z,1513206025.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:25.879Z,1513206025.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:26.269Z,1513206026.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:26.542Z,1513206026.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:26.664Z,1513206026.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:27.067Z,1513206027.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:27.337Z,1513206027.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:27.458Z,1513206027.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:27.741Z,1513206027.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:27.870Z,1513206027.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:28.267Z,1513206028.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:28.537Z,1513206028.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:28.667Z,1513206028.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:29.069Z,1513206029.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:29.334Z,1513206029.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:29.468Z,1513206029.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:29.737Z,1513206029.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:29.868Z,1513206029.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:30.268Z,1513206030.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:30.534Z,1513206030.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:30.669Z,1513206030.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:31.195Z,1513206031.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:31.329Z,1513206031.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:31.479Z,1513206031.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:31.734Z,1513206031.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:31.877Z,1513206031.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:32.267Z,1513206032.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:32.529Z,1513206032.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:32.656Z,1513206032.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:33.059Z,1513206033.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:33.325Z,1513206033.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:33.463Z,1513206033.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:33.729Z,1513206033.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:33.859Z,1513206033.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:34.254Z,1513206034.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:34.525Z,1513206034.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:34.658Z,1513206034.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:35.091Z,1513206035.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:35.321Z,1513206035.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:35.474Z,1513206035.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:35.725Z,1513206035.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:35.935Z,1513206035.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:36.267Z,1513206036.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:36.521Z,1513206036.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:36.701Z,1513206036.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:37.067Z,1513206037.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:37.318Z,1513206037.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:37.495Z,1513206037.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:37.721Z,1513206037.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:37.898Z,1513206037.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:38.261Z,1513206038.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:38.517Z,1513206038.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:38.661Z,1513206038.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:39.058Z,1513206039.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:39.314Z,1513206039.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:39.471Z,1513206039.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:39.717Z,1513206039.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:39.861Z,1513206039.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:40.262Z,1513206040.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:40.514Z,1513206040.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:40.675Z,1513206040.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:41.120Z,1513206041.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:41.309Z,1513206041.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:41.472Z,1513206041.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:41.713Z,1513206041.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:41.875Z,1513206041.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:42.267Z,1513206042.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:42.509Z,1513206042.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:42.662Z,1513206042.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:43.051Z,1513206043.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:43.305Z,1513206043.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:43.450Z,1513206043.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:43.709Z,1513206043.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:43.851Z,1513206043.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:44.255Z,1513206044.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:44.505Z,1513206044.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:44.655Z,1513206044.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:45.051Z,1513206045.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:45.301Z,1513206045.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:45.456Z,1513206045.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:45.705Z,1513206045.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:45.899Z,1513206045.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:46.259Z,1513206046.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:46.502Z,1513206046.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:46.668Z,1513206046.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:47.098Z,1513206047.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:47.297Z,1513206047.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:47.491Z,1513206047.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:47.701Z,1513206047.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:47.857Z,1513206047.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:48.408Z,1513206048.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:48.497Z,1513206048.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:48.811Z,1513206048.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:49.209Z,1513206049.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:49.294Z,1513206049.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:49.609Z,1513206049.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:49.697Z,1513206049.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:50.011Z,1513206050.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:50.408Z,1513206050.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:50.494Z,1513206050.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:50.832Z,1513206050.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:51.218Z,1513206051.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:51.291Z,1513206051.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:51.604Z,1513206051.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:51.749Z,1513206051.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:52.012Z,1513206052.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:52.509Z,1513206052.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:52.545Z,1513206052.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:52.801Z,1513206052.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:53.204Z,1513206053.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:53.341Z,1513206053.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:53.613Z,1513206053.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:53.745Z,1513206053.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:54.002Z,1513206054.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:54.402Z,1513206054.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:54.541Z,1513206054.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:54.815Z,1513206054.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:55.206Z,1513206055.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:55.337Z,1513206055.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:55.611Z,1513206055.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:55.741Z,1513206055.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:56.002Z,1513206056.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:56.411Z,1513206056.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:56.537Z,1513206056.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:56.823Z,1513206056.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:57.208Z,1513206057.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:57.337Z,1513206057.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:57.654Z,1513206057.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:57.741Z,1513206057.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:58.007Z,1513206058.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:58.446Z,1513206058.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:58.537Z,1513206058.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:58.800Z,1513206058.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:59.247Z,1513206059.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:59.334Z,1513206059.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:00:59.614Z,1513206059.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:00:59.623Z,1513206059.623 [SBIT](IMPORTANT): SBIT PASSED
2017-12-13T23:00:59.737Z,1513206059.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:00.008Z,1513206060.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:00.011Z,1513206060.011 [MissionManager](IMPORTANT): Started mission Startup
2017-12-13T23:01:00.011Z,1513206060.011 [Startup] Running Loop=1
2017-12-13T23:01:00.011Z,1513206060.011 [Startup](DEBUG): Aggregate::initialize Startup
2017-12-13T23:01:00.011Z,1513206060.011 [Startup:A.GoToSurface] Running Loop=1
2017-12-13T23:01:00.011Z,1513206060.011 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-12-13T23:01:00.012Z,1513206060.012 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-12-13T23:01:00.013Z,1513206060.013 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-12-13T23:01:00.013Z,1513206060.013 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-12-13T23:01:00.013Z,1513206060.013 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-12-13T23:01:00.014Z,1513206060.014 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-12-13T23:01:00.019Z,1513206060.019 [Startup:StartupSatComms] Running Loop=1
2017-12-13T23:01:00.019Z,1513206060.019 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-12-13T23:01:00.019Z,1513206060.019 [Startup:StartupSatComms:A] Running Loop=1
2017-12-13T23:01:00.414Z,1513206060.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:00.417Z,1513206060.417 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-12-13T23:01:00.534Z,1513206060.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:00.804Z,1513206060.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:01.206Z,1513206061.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:01.331Z,1513206061.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:01.623Z,1513206061.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:01.733Z,1513206061.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:02.009Z,1513206062.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:02.408Z,1513206062.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:02.532Z,1513206062.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:02.823Z,1513206062.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:03.248Z,1513206063.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:03.327Z,1513206063.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:03.614Z,1513206063.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:03.729Z,1513206063.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:04.002Z,1513206064.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:04.403Z,1513206064.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:04.525Z,1513206064.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:04.806Z,1513206064.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:05.205Z,1513206065.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:05.322Z,1513206065.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:05.612Z,1513206065.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:05.734Z,1513206065.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:06.011Z,1513206066.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:06.463Z,1513206066.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:06.530Z,1513206066.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:06.812Z,1513206066.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:07.326Z,1513206067.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:07.339Z,1513206067.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:07.608Z,1513206067.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:07.757Z,1513206067.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:08.039Z,1513206068.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:08.553Z,1513206068.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:09.349Z,1513206069.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:09.753Z,1513206069.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:10.549Z,1513206070.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:11.346Z,1513206071.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:11.646Z,1513206071.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:11.749Z,1513206071.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:11.795Z,1513206071.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:12.139Z,1513206072.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:12.482Z,1513206072.482 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003492
2017-12-13T23:01:12.540Z,1513206072.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:12.545Z,1513206072.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:12.994Z,1513206072.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:13.323Z,1513206073.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:13.341Z,1513206073.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:13.720Z,1513206073.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:13.745Z,1513206073.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:14.119Z,1513206074.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:14.519Z,1513206074.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:14.541Z,1513206074.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:15.065Z,1513206075.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:15.323Z,1513206075.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:15.337Z,1513206075.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:15.736Z,1513206075.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:15.741Z,1513206075.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:16.127Z,1513206076.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:16.536Z,1513206076.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:16.537Z,1513206076.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:16.926Z,1513206076.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:17.325Z,1513206077.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:17.335Z,1513206077.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:17.737Z,1513206077.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:17.778Z,1513206077.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:18.127Z,1513206078.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:18.534Z,1513206078.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:18.537Z,1513206078.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:18.975Z,1513206078.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:19.330Z,1513206079.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:19.427Z,1513206079.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:19.726Z,1513206079.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:19.773Z,1513206079.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:20.135Z,1513206080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:20.542Z,1513206080.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:20.569Z,1513206080.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:20.923Z,1513206080.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:21.365Z,1513206081.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:21.392Z,1513206081.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:21.725Z,1513206081.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:21.769Z,1513206081.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:22.153Z,1513206082.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:22.538Z,1513206082.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:22.565Z,1513206082.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:23.005Z,1513206083.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:23.331Z,1513206083.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:23.362Z,1513206083.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:23.728Z,1513206083.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:23.765Z,1513206083.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:24.123Z,1513206084.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:24.531Z,1513206084.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:24.561Z,1513206084.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:25.009Z,1513206085.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:25.357Z,1513206085.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:25.385Z,1513206085.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:25.720Z,1513206085.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:25.761Z,1513206085.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:26.167Z,1513206086.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:26.521Z,1513206086.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:26.557Z,1513206086.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:26.989Z,1513206086.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:27.331Z,1513206087.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:27.354Z,1513206087.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:27.739Z,1513206087.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:27.757Z,1513206087.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:28.139Z,1513206088.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:28.554Z,1513206088.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:28.556Z,1513206088.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:29.007Z,1513206089.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:29.322Z,1513206089.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:29.349Z,1513206089.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:29.753Z,1513206089.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:29.759Z,1513206089.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:30.122Z,1513206090.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:30.522Z,1513206090.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:30.549Z,1513206090.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:30.931Z,1513206090.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:31.326Z,1513206091.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:31.345Z,1513206091.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:31.749Z,1513206091.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:31.759Z,1513206091.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:32.138Z,1513206092.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:32.518Z,1513206092.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:32.546Z,1513206092.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:32.951Z,1513206092.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:33.342Z,1513206093.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:33.393Z,1513206093.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:33.721Z,1513206093.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:33.745Z,1513206093.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:34.120Z,1513206094.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:34.517Z,1513206094.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:34.541Z,1513206094.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:34.998Z,1513206094.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:35.338Z,1513206095.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:35.376Z,1513206095.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:35.719Z,1513206095.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:35.741Z,1513206095.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:36.116Z,1513206096.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:36.527Z,1513206096.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:36.537Z,1513206096.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:37.007Z,1513206097.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:37.322Z,1513206097.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:37.334Z,1513206097.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:37.719Z,1513206097.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:37.737Z,1513206097.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:38.182Z,1513206098.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:38.528Z,1513206098.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:38.535Z,1513206098.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:38.978Z,1513206098.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:39.324Z,1513206099.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:39.329Z,1513206099.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:39.714Z,1513206099.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:40.112Z,1513206100.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:40.125Z,1513206100.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:40.551Z,1513206100.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:40.833Z,1513206100.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:40.976Z,1513206100.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:41.399Z,1513206101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:41.417Z,1513206101.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:41.739Z,1513206101.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:42.164Z,1513206102.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:42.213Z,1513206102.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:42.513Z,1513206102.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:42.987Z,1513206102.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:43.010Z,1513206103.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:43.348Z,1513206103.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:43.421Z,1513206103.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:43.759Z,1513206103.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:44.147Z,1513206104.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:44.217Z,1513206104.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:44.574Z,1513206104.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:44.918Z,1513206104.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:45.015Z,1513206105.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:45.327Z,1513206105.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:45.449Z,1513206105.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:45.728Z,1513206105.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:46.122Z,1513206106.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:46.122Z,1513206106.122 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-12-13T23:01:46.122Z,1513206106.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:01:46.124Z,1513206106.124 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:46.124Z,1513206106.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-12-13T23:01:46.124Z,1513206106.124 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:01:46.126Z,1513206106.126 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:46.126Z,1513206106.126 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-12-13T23:01:46.126Z,1513206106.126 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:01:46.138Z,1513206106.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:01:46.138Z,1513206106.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:01:46.138Z,1513206106.138 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:01:46.245Z,1513206106.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:46.558Z,1513206106.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:01:46.558Z,1513206106.558 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-12-13T23:01:46.559Z,1513206106.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:01:46.559Z,1513206106.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-12-13T23:01:46.559Z,1513206106.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:01:46.559Z,1513206106.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-12-13T23:01:46.921Z,1513206106.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:01:46.922Z,1513206106.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:01:46.922Z,1513206106.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:01:46.923Z,1513206106.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:01:46.923Z,1513206106.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:01:46.923Z,1513206106.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:01:46.924Z,1513206106.924 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:01:46.924Z,1513206106.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:01:46.924Z,1513206106.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:01:47.041Z,1513206107.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:47.395Z,1513206107.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:47.746Z,1513206107.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:47.760Z,1513206107.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:48.132Z,1513206108.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:48.515Z,1513206108.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:48.541Z,1513206108.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:48.937Z,1513206108.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:49.338Z,1513206109.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:49.403Z,1513206109.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:49.744Z,1513206109.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:49.805Z,1513206109.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:50.119Z,1513206110.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:50.543Z,1513206110.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:50.601Z,1513206110.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:51.063Z,1513206111.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:51.323Z,1513206111.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:51.397Z,1513206111.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:51.725Z,1513206111.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:51.804Z,1513206111.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:52.148Z,1513206112.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:52.520Z,1513206112.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:52.597Z,1513206112.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:52.974Z,1513206112.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:53.332Z,1513206113.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:53.393Z,1513206113.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:53.739Z,1513206113.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:53.797Z,1513206113.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:54.138Z,1513206114.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:54.536Z,1513206114.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:54.593Z,1513206114.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:55.019Z,1513206115.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:55.328Z,1513206115.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:55.389Z,1513206115.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:55.708Z,1513206115.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:55.793Z,1513206115.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:56.132Z,1513206116.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:56.535Z,1513206116.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:56.590Z,1513206116.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:57.013Z,1513206117.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:57.370Z,1513206117.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:57.385Z,1513206117.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:57.716Z,1513206117.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:57.789Z,1513206117.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:58.118Z,1513206118.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:58.522Z,1513206118.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:58.587Z,1513206118.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:58.928Z,1513206118.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:59.335Z,1513206119.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:59.381Z,1513206119.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:01:59.731Z,1513206119.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:01:59.785Z,1513206119.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:00.135Z,1513206120.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:00.139Z,1513206120.139 [Startup:StartupSatComms:A](INFO): Timed out from 2017-12-13T23:01:00.0Z
2017-12-13T23:02:00.139Z,1513206120.139 [Startup:StartupSatComms:A] Stopped
2017-12-13T23:02:00.139Z,1513206120.139 [Startup:StartupSatComms:B] Running Loop=1
2017-12-13T23:02:00.548Z,1513206120.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:00.552Z,1513206120.552 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-12-13T23:02:00.581Z,1513206120.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:01.378Z,1513206121.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:01.781Z,1513206121.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:02.010Z,1513206122.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:02.139Z,1513206122.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:02.577Z,1513206122.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:03.376Z,1513206123.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:03.781Z,1513206123.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:04.577Z,1513206124.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:05.376Z,1513206125.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:05.671Z,1513206125.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:05.781Z,1513206125.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:05.793Z,1513206125.793 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171213T224518/Courier0008.lzma
2017-12-13T23:02:05.956Z,1513206125.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:06.241Z,1513206126.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:06.520Z,1513206126.520 [DataOverHttps](INFO): Moved sent file to Logs/20171213T224518/Courier0008.lzma.bak
2017-12-13T23:02:06.520Z,1513206126.520 [DataOverHttps](INFO): SBD MOMSN=5436851
2017-12-13T23:02:06.574Z,1513206126.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:06.578Z,1513206126.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:07.373Z,1513206127.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:07.535Z,1513206127.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:07.662Z,1513206127.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:07.777Z,1513206127.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:08.573Z,1513206128.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:09.369Z,1513206129.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:09.773Z,1513206129.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:10.569Z,1513206130.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:11.143Z,1513206131.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:11.283Z,1513206131.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:11.366Z,1513206131.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:11.675Z,1513206131.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:11.769Z,1513206131.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:12.071Z,1513206132.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:12.444Z,1513206132.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:12.565Z,1513206132.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:12.855Z,1513206132.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:13.361Z,1513206133.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:13.765Z,1513206133.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:14.561Z,1513206134.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:15.357Z,1513206135.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:15.761Z,1513206135.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:16.265Z,1513206136.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:16.341Z,1513206136.341 [DataOverHttps](INFO): Sending 132 bytes from file Logs/20171213T225830/Courier0000.lzma
2017-12-13T23:02:16.404Z,1513206136.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:16.557Z,1513206136.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:16.792Z,1513206136.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:17.123Z,1513206137.123 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Courier0000.lzma.bak
2017-12-13T23:02:17.123Z,1513206137.123 [DataOverHttps](INFO): SBD MOMSN=5436853
2017-12-13T23:02:17.205Z,1513206137.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:17.353Z,1513206137.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:17.757Z,1513206137.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:18.489Z,1513206138.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:18.553Z,1513206138.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:18.626Z,1513206138.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:19.349Z,1513206139.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:19.753Z,1513206139.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:20.549Z,1513206140.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:21.346Z,1513206141.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:21.749Z,1513206141.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:22.083Z,1513206142.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:22.227Z,1513206142.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:22.549Z,1513206142.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:22.580Z,1513206142.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:23.146Z,1513206143.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:23.345Z,1513206143.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:23.398Z,1513206143.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:23.750Z,1513206143.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:23.787Z,1513206143.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:24.545Z,1513206144.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:25.341Z,1513206145.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:25.745Z,1513206145.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:26.541Z,1513206146.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:27.270Z,1513206147.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:27.339Z,1513206147.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:27.345Z,1513206147.345 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20171213T224518/Express0009.lzma
2017-12-13T23:02:27.431Z,1513206147.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:27.749Z,1513206147.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:27.781Z,1513206147.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:28.123Z,1513206148.123 [DataOverHttps](INFO): Moved sent file to Logs/20171213T224518/Express0009.lzma.bak
2017-12-13T23:02:28.123Z,1513206148.123 [DataOverHttps](INFO): SBD MOMSN=5436858
2017-12-13T23:02:28.214Z,1513206148.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:28.545Z,1513206148.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:29.331Z,1513206149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:29.342Z,1513206149.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:29.467Z,1513206149.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:29.745Z,1513206149.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:30.543Z,1513206150.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:31.338Z,1513206151.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:31.741Z,1513206151.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:32.537Z,1513206152.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:32.876Z,1513206152.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:33.092Z,1513206153.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:33.334Z,1513206153.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:33.415Z,1513206153.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:33.738Z,1513206153.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:33.777Z,1513206153.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:34.194Z,1513206154.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:34.534Z,1513206154.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:34.548Z,1513206154.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:35.329Z,1513206155.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:35.734Z,1513206155.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:36.530Z,1513206156.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:37.326Z,1513206157.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:37.729Z,1513206157.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:38.071Z,1513206158.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:38.154Z,1513206158.154 [DataOverHttps](INFO): Sending 646 bytes from file Logs/20171213T225830/Express0001.lzma
2017-12-13T23:02:38.242Z,1513206158.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:38.525Z,1513206158.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:38.636Z,1513206158.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:38.960Z,1513206158.960 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Express0001.lzma.bak
2017-12-13T23:02:38.977Z,1513206158.977 [DataOverHttps](INFO): SBD MOMSN=5436860
2017-12-13T23:02:39.051Z,1513206159.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:39.321Z,1513206159.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:39.725Z,1513206159.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:40.179Z,1513206160.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:40.183Z,1513206160.183 [Startup:StartupSatComms:B] Stopped
2017-12-13T23:02:40.183Z,1513206160.183 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-12-13T23:02:40.183Z,1513206160.183 [Startup:StartupSatComms] Stopped
2017-12-13T23:02:40.183Z,1513206160.183 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-12-13T23:02:40.184Z,1513206160.184 [Startup](INFO): Completed Startup
2017-12-13T23:02:40.184Z,1513206160.184 [MissionManager](INFO): Startup is completed.
2017-12-13T23:02:40.184Z,1513206160.184 [MissionManager](INFO): Uninitializing Mission Startup
2017-12-13T23:02:40.201Z,1513206160.201 [Startup] Stopped
2017-12-13T23:02:40.201Z,1513206160.201 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-12-13T23:02:40.201Z,1513206160.201 [Startup:A.GoToSurface] Stopped
2017-12-13T23:02:40.201Z,1513206160.201 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-12-13T23:02:40.330Z,1513206160.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:40.337Z,1513206160.337 [MissionManager](IMPORTANT): Started mission Default
2017-12-13T23:02:40.338Z,1513206160.338 [Default] Running Loop=1
2017-12-13T23:02:40.338Z,1513206160.338 [Default](DEBUG): Aggregate::initialize Default
2017-12-13T23:02:40.338Z,1513206160.338 [Default:B.GoToSurface] Running Loop=1
2017-12-13T23:02:40.338Z,1513206160.338 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-12-13T23:02:40.338Z,1513206160.338 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-12-13T23:02:40.338Z,1513206160.338 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-12-13T23:02:40.339Z,1513206160.339 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-12-13T23:02:40.339Z,1513206160.339 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-12-13T23:02:40.339Z,1513206160.339 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-12-13T23:02:40.339Z,1513206160.339 [Default:A.Wait] Running Loop=1
2017-12-13T23:02:40.340Z,1513206160.340 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-12-13T23:02:40.521Z,1513206160.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:41.317Z,1513206161.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:41.721Z,1513206161.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:42.517Z,1513206162.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:43.314Z,1513206163.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:43.741Z,1513206163.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:43.783Z,1513206163.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:43.943Z,1513206163.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:44.302Z,1513206164.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:44.537Z,1513206164.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:44.703Z,1513206164.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:45.081Z,1513206165.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:45.334Z,1513206165.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:45.491Z,1513206165.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:45.737Z,1513206165.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:45.903Z,1513206165.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:46.289Z,1513206166.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:46.534Z,1513206166.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:46.728Z,1513206166.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:47.092Z,1513206167.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:47.329Z,1513206167.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:47.489Z,1513206167.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:47.734Z,1513206167.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:47.894Z,1513206167.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:48.294Z,1513206168.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:48.529Z,1513206168.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:48.697Z,1513206168.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:49.150Z,1513206169.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:49.325Z,1513206169.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:49.502Z,1513206169.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:49.729Z,1513206169.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:49.902Z,1513206169.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:50.302Z,1513206170.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:50.525Z,1513206170.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:50.686Z,1513206170.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:51.087Z,1513206171.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:51.321Z,1513206171.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:51.491Z,1513206171.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:51.725Z,1513206171.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:51.886Z,1513206171.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:52.329Z,1513206172.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:52.521Z,1513206172.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:52.692Z,1513206172.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:53.099Z,1513206173.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:53.318Z,1513206173.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:53.494Z,1513206173.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:53.498Z,1513206173.498 [Default:A.Wait](INFO): Done Waiting.
2017-12-13T23:02:53.498Z,1513206173.498 [Default:A.Wait] Stopped
2017-12-13T23:02:53.498Z,1513206173.498 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-12-13T23:02:53.721Z,1513206173.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:53.896Z,1513206173.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:53.899Z,1513206173.899 [Default:CheckIn] Running Loop=1
2017-12-13T23:02:53.900Z,1513206173.900 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-13T23:02:53.900Z,1513206173.900 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-13T23:02:54.303Z,1513206174.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:54.306Z,1513206174.306 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-12-13T23:02:54.517Z,1513206174.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:54.695Z,1513206174.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:55.092Z,1513206175.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:55.316Z,1513206175.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:55.500Z,1513206175.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:55.721Z,1513206175.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:55.889Z,1513206175.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:56.292Z,1513206176.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:56.517Z,1513206176.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:56.691Z,1513206176.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:57.100Z,1513206177.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:57.314Z,1513206177.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:57.515Z,1513206177.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:57.725Z,1513206177.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:57.878Z,1513206177.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:58.282Z,1513206178.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:58.521Z,1513206178.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:58.772Z,1513206178.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:59.087Z,1513206179.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:59.318Z,1513206179.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:59.569Z,1513206179.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:02:59.721Z,1513206179.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:02:59.885Z,1513206179.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:00.363Z,1513206180.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:00.517Z,1513206180.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:00.687Z,1513206180.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:01.083Z,1513206181.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:01.313Z,1513206181.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:01.495Z,1513206181.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:01.717Z,1513206181.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:01.925Z,1513206181.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:02.315Z,1513206182.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:02.513Z,1513206182.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:02.679Z,1513206182.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:03.087Z,1513206183.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:03.309Z,1513206183.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:03.490Z,1513206183.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:03.713Z,1513206183.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:03.888Z,1513206183.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:04.303Z,1513206184.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:04.509Z,1513206184.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:04.695Z,1513206184.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:05.136Z,1513206185.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:05.306Z,1513206185.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:05.498Z,1513206185.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:05.709Z,1513206185.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:05.932Z,1513206185.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:06.283Z,1513206186.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:06.505Z,1513206186.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:06.688Z,1513206186.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:07.090Z,1513206187.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:07.301Z,1513206187.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:07.492Z,1513206187.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:07.705Z,1513206187.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:07.883Z,1513206187.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:08.330Z,1513206188.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:08.501Z,1513206188.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:08.704Z,1513206188.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:09.090Z,1513206189.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:09.297Z,1513206189.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:09.510Z,1513206189.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:09.701Z,1513206189.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:09.896Z,1513206189.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:10.300Z,1513206190.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:10.497Z,1513206190.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:10.714Z,1513206190.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:11.097Z,1513206191.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:11.295Z,1513206191.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:11.578Z,1513206191.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:11.821Z,1513206191.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:11.883Z,1513206191.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:12.319Z,1513206192.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:12.617Z,1513206192.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:12.688Z,1513206192.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:13.082Z,1513206193.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:13.415Z,1513206193.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:13.522Z,1513206193.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:13.817Z,1513206193.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:13.893Z,1513206193.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:14.294Z,1513206194.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:14.613Z,1513206194.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:14.770Z,1513206194.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:15.088Z,1513206195.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:15.409Z,1513206195.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:15.503Z,1513206195.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:15.939Z,1513206195.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:16.205Z,1513206196.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:16.292Z,1513206196.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:16.698Z,1513206196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:17.001Z,1513206197.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:17.099Z,1513206197.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:17.405Z,1513206197.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:17.482Z,1513206197.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:17.908Z,1513206197.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:18.201Z,1513206198.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:18.284Z,1513206198.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:18.682Z,1513206198.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:19.001Z,1513206199.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:19.099Z,1513206199.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:19.405Z,1513206199.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:19.485Z,1513206199.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:19.892Z,1513206199.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:20.201Z,1513206200.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:20.292Z,1513206200.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:20.782Z,1513206200.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:20.997Z,1513206200.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:21.113Z,1513206201.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:21.401Z,1513206201.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:21.522Z,1513206201.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:21.883Z,1513206201.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:22.197Z,1513206202.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:22.322Z,1513206202.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:22.690Z,1513206202.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:22.995Z,1513206202.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:23.100Z,1513206203.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:23.429Z,1513206203.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:23.492Z,1513206203.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:23.884Z,1513206203.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:24.225Z,1513206204.225 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:24.328Z,1513206204.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:24.689Z,1513206204.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:25.023Z,1513206205.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:25.099Z,1513206205.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:25.509Z,1513206205.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:25.713Z,1513206205.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:25.899Z,1513206205.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:26.304Z,1513206206.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:26.509Z,1513206206.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:26.695Z,1513206206.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:27.091Z,1513206207.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:27.306Z,1513206207.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:27.550Z,1513206207.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:27.713Z,1513206207.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:27.907Z,1513206207.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:28.276Z,1513206208.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:28.509Z,1513206208.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:28.703Z,1513206208.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:29.078Z,1513206209.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:29.305Z,1513206209.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:29.487Z,1513206209.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:29.709Z,1513206209.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:29.884Z,1513206209.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:30.370Z,1513206210.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:30.506Z,1513206210.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:30.719Z,1513206210.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:31.084Z,1513206211.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:31.301Z,1513206211.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:31.492Z,1513206211.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:31.705Z,1513206211.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:31.888Z,1513206211.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:32.286Z,1513206212.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:32.504Z,1513206212.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:32.682Z,1513206212.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:33.083Z,1513206213.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:33.297Z,1513206213.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:33.491Z,1513206213.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:33.701Z,1513206213.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:33.942Z,1513206213.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:34.296Z,1513206214.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:34.497Z,1513206214.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:34.699Z,1513206214.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:35.081Z,1513206215.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:35.293Z,1513206215.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:35.500Z,1513206215.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:35.697Z,1513206215.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:35.888Z,1513206215.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:36.311Z,1513206216.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:36.493Z,1513206216.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:36.692Z,1513206216.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:37.153Z,1513206217.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:37.289Z,1513206217.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:37.495Z,1513206217.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:37.693Z,1513206217.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:37.895Z,1513206217.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:38.299Z,1513206218.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:38.489Z,1513206218.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:38.673Z,1513206218.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:39.099Z,1513206219.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:39.291Z,1513206219.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:39.503Z,1513206219.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:39.717Z,1513206219.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:39.879Z,1513206219.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:40.329Z,1513206220.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:40.513Z,1513206220.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:40.711Z,1513206220.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:41.309Z,1513206221.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:41.801Z,1513206221.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:42.597Z,1513206222.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:43.381Z,1513206223.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:44.178Z,1513206224.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:44.260Z,1513206224.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:44.407Z,1513206224.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:44.790Z,1513206224.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:44.974Z,1513206224.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:45.161Z,1513206225.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:45.377Z,1513206225.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:45.583Z,1513206225.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:45.943Z,1513206225.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:46.173Z,1513206226.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:46.330Z,1513206226.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:46.780Z,1513206226.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:46.970Z,1513206226.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:47.179Z,1513206227.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:47.447Z,1513206227.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:47.567Z,1513206227.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:47.963Z,1513206227.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:48.241Z,1513206228.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:48.344Z,1513206228.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:48.741Z,1513206228.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:49.037Z,1513206229.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:49.178Z,1513206229.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:49.441Z,1513206229.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:49.570Z,1513206229.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:50.011Z,1513206230.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:50.237Z,1513206230.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:50.368Z,1513206230.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:50.747Z,1513206230.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:51.033Z,1513206231.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:51.143Z,1513206231.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:51.437Z,1513206231.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:51.555Z,1513206231.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:51.950Z,1513206231.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:52.233Z,1513206232.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:52.368Z,1513206232.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:52.758Z,1513206232.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:53.032Z,1513206233.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:53.203Z,1513206233.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:53.558Z,1513206233.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:53.749Z,1513206233.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:53.987Z,1513206233.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:54.370Z,1513206234.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:54.545Z,1513206234.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:54.763Z,1513206234.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:55.163Z,1513206235.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:55.344Z,1513206235.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:55.574Z,1513206235.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:55.749Z,1513206235.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:55.963Z,1513206235.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:56.360Z,1513206236.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:56.545Z,1513206236.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:56.756Z,1513206236.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:57.165Z,1513206237.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:57.345Z,1513206237.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:57.539Z,1513206237.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:57.749Z,1513206237.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:57.963Z,1513206237.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:58.367Z,1513206238.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:58.548Z,1513206238.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:58.771Z,1513206238.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:59.143Z,1513206239.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:59.341Z,1513206239.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:59.587Z,1513206239.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:03:59.745Z,1513206239.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:03:59.967Z,1513206239.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:00.370Z,1513206240.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:00.541Z,1513206240.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:00.766Z,1513206240.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:01.151Z,1513206241.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:01.338Z,1513206241.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:01.549Z,1513206241.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:01.741Z,1513206241.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:01.974Z,1513206241.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:02.373Z,1513206242.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:02.538Z,1513206242.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:02.785Z,1513206242.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:03.154Z,1513206243.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:03.334Z,1513206243.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:03.572Z,1513206243.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:03.737Z,1513206243.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:03.958Z,1513206243.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:04.491Z,1513206244.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:04.553Z,1513206244.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:04.762Z,1513206244.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:05.197Z,1513206245.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:05.349Z,1513206245.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:05.568Z,1513206245.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:05.753Z,1513206245.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:06.054Z,1513206246.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:06.357Z,1513206246.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:06.549Z,1513206246.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:06.779Z,1513206246.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:07.155Z,1513206247.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:07.345Z,1513206247.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:07.579Z,1513206247.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:07.749Z,1513206247.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:07.949Z,1513206247.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:08.376Z,1513206248.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:08.545Z,1513206248.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:08.743Z,1513206248.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:09.153Z,1513206249.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:09.342Z,1513206249.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:09.567Z,1513206249.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:09.745Z,1513206249.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:09.979Z,1513206249.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:10.397Z,1513206250.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:10.541Z,1513206250.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:10.760Z,1513206250.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:11.167Z,1513206251.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:11.337Z,1513206251.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:11.551Z,1513206251.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:11.741Z,1513206251.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:11.955Z,1513206251.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:12.352Z,1513206252.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:12.537Z,1513206252.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:12.757Z,1513206252.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:13.149Z,1513206253.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:13.334Z,1513206253.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:13.556Z,1513206253.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:13.737Z,1513206253.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:13.950Z,1513206253.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:14.355Z,1513206254.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:14.534Z,1513206254.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:14.759Z,1513206254.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:15.166Z,1513206255.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:15.332Z,1513206255.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:15.627Z,1513206255.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:15.737Z,1513206255.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:15.959Z,1513206255.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:16.373Z,1513206256.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:16.534Z,1513206256.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:16.740Z,1513206256.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:17.164Z,1513206257.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:17.329Z,1513206257.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:17.569Z,1513206257.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:17.734Z,1513206257.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:17.978Z,1513206257.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:18.342Z,1513206258.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:18.529Z,1513206258.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:18.788Z,1513206258.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:19.147Z,1513206259.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:19.325Z,1513206259.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:19.559Z,1513206259.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:19.729Z,1513206259.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:19.945Z,1513206259.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:20.357Z,1513206260.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:20.526Z,1513206260.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:20.752Z,1513206260.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:21.177Z,1513206261.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:21.322Z,1513206261.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:21.555Z,1513206261.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:21.725Z,1513206261.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:21.992Z,1513206261.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:22.348Z,1513206262.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:22.521Z,1513206262.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:22.778Z,1513206262.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:23.141Z,1513206263.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:23.318Z,1513206263.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:23.655Z,1513206263.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:23.721Z,1513206263.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:23.948Z,1513206263.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:24.374Z,1513206264.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:24.517Z,1513206264.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:24.747Z,1513206264.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:25.184Z,1513206265.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:25.313Z,1513206265.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:25.561Z,1513206265.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:25.717Z,1513206265.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:25.987Z,1513206265.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:26.365Z,1513206266.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:26.513Z,1513206266.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:26.760Z,1513206266.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:27.162Z,1513206267.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:27.309Z,1513206267.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:27.635Z,1513206267.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:27.713Z,1513206267.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:27.906Z,1513206267.906 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-12-13T23:04:27.960Z,1513206267.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:28.398Z,1513206268.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:28.509Z,1513206268.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:28.763Z,1513206268.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:29.183Z,1513206269.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:29.305Z,1513206269.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:29.558Z,1513206269.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:29.709Z,1513206269.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:29.931Z,1513206269.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:30.363Z,1513206270.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:30.505Z,1513206270.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:30.766Z,1513206270.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:31.161Z,1513206271.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:31.301Z,1513206271.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:31.614Z,1513206271.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:31.706Z,1513206271.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:31.966Z,1513206271.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:32.368Z,1513206272.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:32.501Z,1513206272.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:32.768Z,1513206272.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:33.166Z,1513206273.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:33.297Z,1513206273.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:33.563Z,1513206273.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:33.701Z,1513206273.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:33.975Z,1513206273.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:34.341Z,1513206274.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:34.497Z,1513206274.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:34.770Z,1513206274.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:35.147Z,1513206275.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:35.295Z,1513206275.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:35.571Z,1513206275.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:35.721Z,1513206275.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:35.954Z,1513206275.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:36.358Z,1513206276.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:36.517Z,1513206276.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:36.754Z,1513206276.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:37.176Z,1513206277.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:37.315Z,1513206277.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:37.579Z,1513206277.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:37.717Z,1513206277.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:37.981Z,1513206277.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:38.354Z,1513206278.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:38.514Z,1513206278.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:38.768Z,1513206278.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:39.163Z,1513206279.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:39.309Z,1513206279.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:39.564Z,1513206279.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:39.713Z,1513206279.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:39.987Z,1513206279.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:40.368Z,1513206280.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:40.509Z,1513206280.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:40.740Z,1513206280.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:41.305Z,1513206281.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:41.709Z,1513206281.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:42.505Z,1513206282.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:43.301Z,1513206283.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:43.705Z,1513206283.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:44.164Z,1513206284.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:44.295Z,1513206284.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:44.501Z,1513206284.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:44.671Z,1513206284.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:45.078Z,1513206285.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:45.297Z,1513206285.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:45.472Z,1513206285.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:45.701Z,1513206285.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:45.876Z,1513206285.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:46.257Z,1513206286.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:46.497Z,1513206286.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:46.666Z,1513206286.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:47.089Z,1513206287.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:47.089Z,1513206287.089 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-12-13T23:04:47.089Z,1513206287.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:04:47.091Z,1513206287.091 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:47.091Z,1513206287.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2017-12-13T23:04:47.091Z,1513206287.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:04:47.093Z,1513206287.093 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:47.093Z,1513206287.093 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-12-13T23:04:47.093Z,1513206287.093 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:04:47.106Z,1513206287.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:04:47.106Z,1513206287.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:04:47.106Z,1513206287.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:04:47.293Z,1513206287.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:47.521Z,1513206287.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:04:47.521Z,1513206287.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-12-13T23:04:47.521Z,1513206287.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:04:47.521Z,1513206287.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2017-12-13T23:04:47.522Z,1513206287.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:04:47.522Z,1513206287.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-12-13T23:04:47.697Z,1513206287.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:47.889Z,1513206287.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:04:47.890Z,1513206287.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:04:47.890Z,1513206287.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:04:47.891Z,1513206287.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:04:47.891Z,1513206287.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:04:47.891Z,1513206287.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:04:47.892Z,1513206287.892 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:04:47.892Z,1513206287.892 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:04:47.892Z,1513206287.892 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:04:48.262Z,1513206288.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:48.493Z,1513206288.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:48.667Z,1513206288.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:49.077Z,1513206289.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:49.290Z,1513206289.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:49.558Z,1513206289.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:49.713Z,1513206289.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:49.924Z,1513206289.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:50.270Z,1513206290.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:50.509Z,1513206290.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:50.730Z,1513206290.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:51.117Z,1513206291.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:51.306Z,1513206291.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:51.511Z,1513206291.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:51.717Z,1513206291.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:51.877Z,1513206291.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:52.276Z,1513206292.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:52.513Z,1513206292.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:52.671Z,1513206292.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:53.070Z,1513206293.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:53.309Z,1513206293.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:53.477Z,1513206293.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:53.713Z,1513206293.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:53.896Z,1513206293.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:54.282Z,1513206294.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:54.509Z,1513206294.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:54.682Z,1513206294.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:55.072Z,1513206295.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:55.308Z,1513206295.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:55.472Z,1513206295.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:55.713Z,1513206295.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:55.875Z,1513206295.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:56.279Z,1513206296.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:56.509Z,1513206296.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:56.683Z,1513206296.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:57.134Z,1513206297.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:57.305Z,1513206297.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:57.462Z,1513206297.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:57.709Z,1513206297.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:57.863Z,1513206297.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:58.258Z,1513206298.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:58.505Z,1513206298.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:58.663Z,1513206298.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:59.086Z,1513206299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:59.301Z,1513206299.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:59.483Z,1513206299.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:04:59.705Z,1513206299.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:04:59.903Z,1513206299.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:00.346Z,1513206300.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:00.501Z,1513206300.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:00.659Z,1513206300.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:01.085Z,1513206301.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:01.297Z,1513206301.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:01.490Z,1513206301.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:01.701Z,1513206301.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:01.886Z,1513206301.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:02.262Z,1513206302.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:02.497Z,1513206302.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:02.659Z,1513206302.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:03.063Z,1513206303.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:03.295Z,1513206303.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:03.501Z,1513206303.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:03.713Z,1513206303.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:03.864Z,1513206303.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:04.268Z,1513206304.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:04.509Z,1513206304.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:04.664Z,1513206304.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:05.063Z,1513206305.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:05.306Z,1513206305.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:05.463Z,1513206305.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:05.717Z,1513206305.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:05.864Z,1513206305.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:06.291Z,1513206306.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:06.513Z,1513206306.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:06.691Z,1513206306.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:07.071Z,1513206307.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:07.309Z,1513206307.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:07.461Z,1513206307.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:07.713Z,1513206307.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:07.868Z,1513206307.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:08.272Z,1513206308.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:08.509Z,1513206308.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:08.668Z,1513206308.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:09.082Z,1513206309.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:09.305Z,1513206309.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:09.470Z,1513206309.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:09.709Z,1513206309.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:09.907Z,1513206309.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:10.283Z,1513206310.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:10.505Z,1513206310.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:10.673Z,1513206310.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:11.075Z,1513206311.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:11.302Z,1513206311.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:11.467Z,1513206311.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:11.705Z,1513206311.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:11.922Z,1513206311.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:12.300Z,1513206312.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:12.501Z,1513206312.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:12.683Z,1513206312.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:13.121Z,1513206313.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:13.297Z,1513206313.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:13.474Z,1513206313.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:13.701Z,1513206313.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:13.997Z,1513206313.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:14.276Z,1513206314.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:14.497Z,1513206314.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:14.672Z,1513206314.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:15.086Z,1513206315.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:15.293Z,1513206315.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:15.475Z,1513206315.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:15.697Z,1513206315.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:15.874Z,1513206315.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:16.299Z,1513206316.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:16.493Z,1513206316.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:16.676Z,1513206316.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:17.083Z,1513206317.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:17.291Z,1513206317.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:17.483Z,1513206317.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:17.721Z,1513206317.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:17.878Z,1513206317.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:18.259Z,1513206318.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:18.517Z,1513206318.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:18.664Z,1513206318.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:19.094Z,1513206319.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:19.314Z,1513206319.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:19.507Z,1513206319.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:19.717Z,1513206319.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:19.871Z,1513206319.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:20.266Z,1513206320.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:20.513Z,1513206320.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:20.663Z,1513206320.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:21.063Z,1513206321.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:21.309Z,1513206321.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:21.470Z,1513206321.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:21.713Z,1513206321.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:21.863Z,1513206321.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:22.308Z,1513206322.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:22.510Z,1513206322.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:22.710Z,1513206322.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:23.082Z,1513206323.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:23.305Z,1513206323.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:23.465Z,1513206323.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:23.709Z,1513206323.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:23.867Z,1513206323.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:24.267Z,1513206324.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:24.505Z,1513206324.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:24.666Z,1513206324.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:25.072Z,1513206325.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:25.301Z,1513206325.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:25.519Z,1513206325.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:25.874Z,1513206325.874 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:25.900Z,1513206325.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:26.262Z,1513206326.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:26.663Z,1513206326.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:26.677Z,1513206326.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:27.060Z,1513206327.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:27.377Z,1513206327.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:27.481Z,1513206327.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:27.892Z,1513206327.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:28.177Z,1513206328.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:28.293Z,1513206328.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:28.668Z,1513206328.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:28.975Z,1513206328.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:29.127Z,1513206329.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:29.470Z,1513206329.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:29.509Z,1513206329.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:29.875Z,1513206329.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:30.276Z,1513206330.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:30.306Z,1513206330.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:30.674Z,1513206330.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:31.066Z,1513206331.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:31.101Z,1513206331.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:31.471Z,1513206331.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:31.717Z,1513206331.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:31.876Z,1513206331.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:32.315Z,1513206332.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:32.513Z,1513206332.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:32.672Z,1513206332.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:33.071Z,1513206333.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:33.310Z,1513206333.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:33.461Z,1513206333.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:33.717Z,1513206333.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:33.926Z,1513206333.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:34.296Z,1513206334.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:34.513Z,1513206334.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:34.682Z,1513206334.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:35.090Z,1513206335.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:35.309Z,1513206335.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:35.510Z,1513206335.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:35.713Z,1513206335.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:35.898Z,1513206335.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:36.278Z,1513206336.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:36.509Z,1513206336.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:36.681Z,1513206336.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:37.082Z,1513206337.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:37.305Z,1513206337.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:37.472Z,1513206337.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:37.709Z,1513206337.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:37.883Z,1513206337.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:38.275Z,1513206338.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:38.505Z,1513206338.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:38.691Z,1513206338.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:39.091Z,1513206339.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:39.301Z,1513206339.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:39.490Z,1513206339.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:39.705Z,1513206339.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:39.868Z,1513206339.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:40.262Z,1513206340.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:40.502Z,1513206340.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:40.659Z,1513206340.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:41.060Z,1513206341.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:41.297Z,1513206341.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:41.701Z,1513206341.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:42.497Z,1513206342.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:43.294Z,1513206343.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:43.697Z,1513206343.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:44.493Z,1513206344.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:44.593Z,1513206344.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:44.739Z,1513206344.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:45.098Z,1513206345.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:45.295Z,1513206345.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:45.489Z,1513206345.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:45.717Z,1513206345.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:45.863Z,1513206345.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:46.261Z,1513206346.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:46.513Z,1513206346.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:46.670Z,1513206346.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:47.089Z,1513206347.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:47.310Z,1513206347.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:47.485Z,1513206347.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:47.745Z,1513206347.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:47.876Z,1513206347.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:48.305Z,1513206348.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:48.541Z,1513206348.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:48.666Z,1513206348.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:49.073Z,1513206349.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:49.338Z,1513206349.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:49.460Z,1513206349.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:49.741Z,1513206349.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:49.875Z,1513206349.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:50.275Z,1513206350.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:50.537Z,1513206350.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:50.672Z,1513206350.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:51.067Z,1513206351.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:51.334Z,1513206351.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:51.507Z,1513206351.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:51.737Z,1513206351.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:51.891Z,1513206351.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:52.279Z,1513206352.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:52.534Z,1513206352.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:52.687Z,1513206352.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:53.123Z,1513206353.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:53.329Z,1513206353.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:53.481Z,1513206353.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:53.734Z,1513206353.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:53.882Z,1513206353.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:54.283Z,1513206354.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:54.529Z,1513206354.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:54.687Z,1513206354.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:55.063Z,1513206355.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:55.325Z,1513206355.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:55.467Z,1513206355.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:55.729Z,1513206355.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:55.868Z,1513206355.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:56.282Z,1513206356.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:56.527Z,1513206356.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:56.715Z,1513206356.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:57.116Z,1513206357.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:57.321Z,1513206357.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:57.471Z,1513206357.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:57.725Z,1513206357.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:57.963Z,1513206357.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:58.285Z,1513206358.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:58.521Z,1513206358.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:58.719Z,1513206358.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:59.128Z,1513206359.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:59.318Z,1513206359.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:59.467Z,1513206359.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:05:59.721Z,1513206359.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:05:59.864Z,1513206359.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:00.277Z,1513206360.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:00.517Z,1513206360.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:00.678Z,1513206360.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:01.107Z,1513206361.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:01.314Z,1513206361.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:01.472Z,1513206361.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:01.717Z,1513206361.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:01.873Z,1513206361.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:02.270Z,1513206362.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:02.513Z,1513206362.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:02.675Z,1513206362.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:03.082Z,1513206363.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:03.309Z,1513206363.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:03.493Z,1513206363.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:03.713Z,1513206363.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:03.894Z,1513206363.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:04.349Z,1513206364.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:04.509Z,1513206364.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:04.662Z,1513206364.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:05.063Z,1513206365.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:05.329Z,1513206365.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:05.467Z,1513206365.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:05.734Z,1513206365.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:05.868Z,1513206365.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:06.272Z,1513206366.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:06.532Z,1513206366.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:06.674Z,1513206366.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:07.103Z,1513206367.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:07.325Z,1513206367.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:07.504Z,1513206367.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:07.729Z,1513206367.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:07.872Z,1513206367.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:08.275Z,1513206368.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:08.525Z,1513206368.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:08.679Z,1513206368.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:09.073Z,1513206369.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:09.321Z,1513206369.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:09.478Z,1513206369.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:09.725Z,1513206369.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:09.877Z,1513206369.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:10.275Z,1513206370.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:10.521Z,1513206370.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:10.715Z,1513206370.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:11.168Z,1513206371.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:11.317Z,1513206371.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:11.495Z,1513206371.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:11.721Z,1513206371.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:11.876Z,1513206371.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:12.280Z,1513206372.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:12.517Z,1513206372.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:12.673Z,1513206372.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:13.075Z,1513206373.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:13.314Z,1513206373.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:13.480Z,1513206373.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:13.717Z,1513206373.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:13.894Z,1513206373.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:14.290Z,1513206374.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:14.513Z,1513206374.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:14.683Z,1513206374.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:15.054Z,1513206375.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:15.310Z,1513206375.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:15.453Z,1513206375.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:15.734Z,1513206375.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:15.883Z,1513206375.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:16.291Z,1513206376.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:16.529Z,1513206376.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:16.681Z,1513206376.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:17.084Z,1513206377.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:17.325Z,1513206377.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:17.459Z,1513206377.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:17.729Z,1513206377.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:17.891Z,1513206377.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:18.282Z,1513206378.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:18.525Z,1513206378.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:18.683Z,1513206378.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:19.134Z,1513206379.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:19.322Z,1513206379.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:19.460Z,1513206379.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:19.725Z,1513206379.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:19.903Z,1513206379.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:20.288Z,1513206380.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:20.521Z,1513206380.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:20.725Z,1513206380.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:21.064Z,1513206381.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:21.317Z,1513206381.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:21.467Z,1513206381.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:21.721Z,1513206381.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:21.868Z,1513206381.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:22.290Z,1513206382.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:22.517Z,1513206382.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:22.670Z,1513206382.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:23.062Z,1513206383.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:23.313Z,1513206383.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:23.510Z,1513206383.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:23.717Z,1513206383.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:23.867Z,1513206383.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:24.268Z,1513206384.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:24.513Z,1513206384.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:24.688Z,1513206384.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:25.089Z,1513206385.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:25.309Z,1513206385.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:25.465Z,1513206385.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:25.713Z,1513206385.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:25.890Z,1513206385.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:26.264Z,1513206386.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:26.509Z,1513206386.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:26.695Z,1513206386.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:27.078Z,1513206387.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:27.306Z,1513206387.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:27.472Z,1513206387.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:27.717Z,1513206387.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:27.898Z,1513206387.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:28.279Z,1513206388.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:28.513Z,1513206388.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:28.672Z,1513206388.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:29.107Z,1513206389.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:29.310Z,1513206389.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:29.468Z,1513206389.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:29.717Z,1513206389.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:29.920Z,1513206389.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:30.280Z,1513206390.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:30.513Z,1513206390.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:30.679Z,1513206390.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:31.076Z,1513206391.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:31.309Z,1513206391.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:31.463Z,1513206391.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:31.713Z,1513206391.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:31.882Z,1513206391.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:32.307Z,1513206392.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:32.509Z,1513206392.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:32.677Z,1513206392.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:33.091Z,1513206393.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:33.305Z,1513206393.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:33.478Z,1513206393.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:33.709Z,1513206393.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:33.876Z,1513206393.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:34.280Z,1513206394.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:34.505Z,1513206394.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:34.674Z,1513206394.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:35.070Z,1513206395.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:35.301Z,1513206395.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:35.480Z,1513206395.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:35.705Z,1513206395.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:35.873Z,1513206395.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:36.278Z,1513206396.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:36.501Z,1513206396.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:36.687Z,1513206396.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:37.074Z,1513206397.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:37.300Z,1513206397.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:37.471Z,1513206397.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:37.705Z,1513206397.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:37.872Z,1513206397.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:38.295Z,1513206398.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:38.502Z,1513206398.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:38.678Z,1513206398.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:39.089Z,1513206399.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:39.297Z,1513206399.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:39.525Z,1513206399.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:39.701Z,1513206399.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:39.887Z,1513206399.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:40.282Z,1513206400.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:40.497Z,1513206400.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:40.687Z,1513206400.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:41.079Z,1513206401.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:41.295Z,1513206401.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:41.510Z,1513206401.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:41.713Z,1513206401.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:42.510Z,1513206402.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:43.306Z,1513206403.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:43.737Z,1513206403.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:44.534Z,1513206404.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:45.143Z,1513206405.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:45.255Z,1513206405.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:45.329Z,1513206405.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:45.685Z,1513206405.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:45.734Z,1513206405.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:46.044Z,1513206406.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:46.451Z,1513206406.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:46.529Z,1513206406.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:46.813Z,1513206406.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:47.236Z,1513206407.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:47.325Z,1513206407.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:47.628Z,1513206407.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:47.729Z,1513206407.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:48.044Z,1513206408.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:48.447Z,1513206408.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:48.525Z,1513206408.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:48.836Z,1513206408.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:49.255Z,1513206409.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:49.322Z,1513206409.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:49.620Z,1513206409.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:49.725Z,1513206409.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:50.019Z,1513206410.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:50.416Z,1513206410.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:50.521Z,1513206410.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:50.815Z,1513206410.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:51.247Z,1513206411.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:51.317Z,1513206411.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:51.639Z,1513206411.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:51.721Z,1513206411.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:52.033Z,1513206412.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:52.428Z,1513206412.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:52.518Z,1513206412.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:52.827Z,1513206412.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:53.220Z,1513206413.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:53.313Z,1513206413.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:53.625Z,1513206413.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:53.717Z,1513206413.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:54.033Z,1513206414.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:54.433Z,1513206414.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:54.513Z,1513206414.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:54.863Z,1513206414.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:55.226Z,1513206415.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:55.310Z,1513206415.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:55.635Z,1513206415.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:55.734Z,1513206415.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:56.021Z,1513206416.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:56.418Z,1513206416.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:56.530Z,1513206416.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:56.819Z,1513206416.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:57.230Z,1513206417.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:57.326Z,1513206417.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:57.636Z,1513206417.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:57.741Z,1513206417.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:58.041Z,1513206418.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:58.430Z,1513206418.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:58.537Z,1513206418.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:58.833Z,1513206418.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:59.219Z,1513206419.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:59.334Z,1513206419.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:06:59.619Z,1513206419.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:06:59.737Z,1513206419.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:00.027Z,1513206420.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:00.467Z,1513206420.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:00.534Z,1513206420.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:00.846Z,1513206420.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:01.219Z,1513206421.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:01.331Z,1513206421.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:01.615Z,1513206421.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:01.733Z,1513206421.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:02.017Z,1513206422.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:02.422Z,1513206422.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:02.529Z,1513206422.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:02.817Z,1513206422.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:03.227Z,1513206423.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:03.325Z,1513206423.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:03.624Z,1513206423.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:03.729Z,1513206423.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:04.023Z,1513206424.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:04.420Z,1513206424.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:04.525Z,1513206424.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:04.819Z,1513206424.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:05.280Z,1513206425.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:05.321Z,1513206425.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:05.617Z,1513206425.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:05.725Z,1513206425.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:06.028Z,1513206426.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:06.434Z,1513206426.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:06.521Z,1513206426.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:06.882Z,1513206426.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:07.318Z,1513206427.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:07.367Z,1513206427.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:07.655Z,1513206427.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:07.721Z,1513206427.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:08.022Z,1513206428.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:08.482Z,1513206428.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:08.517Z,1513206428.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:08.827Z,1513206428.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:09.234Z,1513206429.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:09.314Z,1513206429.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:09.635Z,1513206429.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:09.741Z,1513206429.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:10.041Z,1513206430.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:10.435Z,1513206430.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:10.537Z,1513206430.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:10.812Z,1513206430.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:11.240Z,1513206431.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:11.334Z,1513206431.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:11.658Z,1513206431.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:11.746Z,1513206431.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:12.048Z,1513206432.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:12.468Z,1513206432.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:12.541Z,1513206432.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:12.824Z,1513206432.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:13.222Z,1513206433.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:13.337Z,1513206433.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:13.625Z,1513206433.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:13.741Z,1513206433.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:14.023Z,1513206434.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:14.418Z,1513206434.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:14.537Z,1513206434.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:14.874Z,1513206434.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:15.247Z,1513206435.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:15.334Z,1513206435.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:15.642Z,1513206435.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:15.737Z,1513206435.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:16.046Z,1513206436.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:16.423Z,1513206436.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:16.534Z,1513206436.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:16.852Z,1513206436.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:17.219Z,1513206437.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:17.331Z,1513206437.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:17.622Z,1513206437.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:17.737Z,1513206437.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:18.048Z,1513206438.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:18.434Z,1513206438.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:18.534Z,1513206438.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:18.835Z,1513206438.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:19.216Z,1513206439.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:19.329Z,1513206439.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:19.618Z,1513206439.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:19.734Z,1513206439.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:20.023Z,1513206440.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:20.423Z,1513206440.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:20.530Z,1513206440.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:20.823Z,1513206440.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:21.267Z,1513206441.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:21.326Z,1513206441.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:21.636Z,1513206441.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:21.729Z,1513206441.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:22.028Z,1513206442.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:22.431Z,1513206442.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:22.525Z,1513206442.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:22.823Z,1513206442.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:23.220Z,1513206443.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:23.322Z,1513206443.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:23.644Z,1513206443.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:23.757Z,1513206443.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:24.036Z,1513206444.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:24.488Z,1513206444.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:24.553Z,1513206444.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:24.834Z,1513206444.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:25.231Z,1513206445.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:25.350Z,1513206445.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:25.619Z,1513206445.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:25.753Z,1513206445.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:26.018Z,1513206446.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:26.416Z,1513206446.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:26.550Z,1513206446.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:26.826Z,1513206446.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:27.232Z,1513206447.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:27.345Z,1513206447.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:27.687Z,1513206447.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:27.749Z,1513206447.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:28.034Z,1513206448.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:28.419Z,1513206448.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:28.545Z,1513206448.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:28.855Z,1513206448.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:29.226Z,1513206449.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:29.342Z,1513206449.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:29.626Z,1513206449.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:29.745Z,1513206449.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:30.071Z,1513206450.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:30.432Z,1513206450.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:30.541Z,1513206450.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:30.870Z,1513206450.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:31.219Z,1513206451.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:31.337Z,1513206451.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:31.622Z,1513206451.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:31.741Z,1513206451.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:32.018Z,1513206452.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:32.417Z,1513206452.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:32.537Z,1513206452.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:32.819Z,1513206452.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:33.246Z,1513206453.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:33.334Z,1513206453.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:33.648Z,1513206453.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:33.737Z,1513206453.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:34.048Z,1513206454.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:34.424Z,1513206454.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:34.534Z,1513206454.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:34.820Z,1513206454.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:35.218Z,1513206455.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:35.329Z,1513206455.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:35.620Z,1513206455.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:35.734Z,1513206455.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:36.028Z,1513206456.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:36.431Z,1513206456.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:36.529Z,1513206456.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:36.827Z,1513206456.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:37.284Z,1513206457.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:37.325Z,1513206457.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:37.637Z,1513206457.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:37.773Z,1513206457.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:38.008Z,1513206458.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:38.435Z,1513206458.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:38.569Z,1513206458.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:38.817Z,1513206458.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:39.318Z,1513206459.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:39.366Z,1513206459.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:39.642Z,1513206459.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:39.769Z,1513206459.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:40.043Z,1513206460.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:40.423Z,1513206460.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:40.566Z,1513206460.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:40.843Z,1513206460.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:41.222Z,1513206461.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:41.361Z,1513206461.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:41.620Z,1513206461.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:41.765Z,1513206461.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:42.561Z,1513206462.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:43.358Z,1513206463.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:43.761Z,1513206463.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:44.557Z,1513206464.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:45.210Z,1513206465.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:45.351Z,1513206465.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:45.354Z,1513206465.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:45.711Z,1513206465.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:45.757Z,1513206465.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:46.102Z,1513206466.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:46.495Z,1513206466.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:46.553Z,1513206466.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:46.974Z,1513206466.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:47.282Z,1513206467.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:47.349Z,1513206467.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:47.685Z,1513206467.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:47.753Z,1513206467.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:48.088Z,1513206468.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:48.088Z,1513206468.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-12-13T23:07:48.088Z,1513206468.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:07:48.090Z,1513206468.090 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:48.090Z,1513206468.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2017-12-13T23:07:48.090Z,1513206468.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:07:48.092Z,1513206468.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:48.092Z,1513206468.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-12-13T23:07:48.092Z,1513206468.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:07:48.126Z,1513206468.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:07:48.126Z,1513206468.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:07:48.126Z,1513206468.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:07:48.503Z,1513206468.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:07:48.504Z,1513206468.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-12-13T23:07:48.504Z,1513206468.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:07:48.504Z,1513206468.504 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2017-12-13T23:07:48.521Z,1513206468.521 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:07:48.521Z,1513206468.521 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-12-13T23:07:48.550Z,1513206468.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:48.891Z,1513206468.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:07:48.891Z,1513206468.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:07:48.891Z,1513206468.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:07:48.892Z,1513206468.892 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:07:48.892Z,1513206468.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:07:48.897Z,1513206468.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:07:48.897Z,1513206468.897 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:07:48.898Z,1513206468.898 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:07:48.898Z,1513206468.898 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:07:49.286Z,1513206469.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:49.345Z,1513206469.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:49.718Z,1513206469.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:49.750Z,1513206469.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:50.126Z,1513206470.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:50.490Z,1513206470.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:50.545Z,1513206470.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:50.902Z,1513206470.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:51.341Z,1513206471.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:51.388Z,1513206471.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:51.703Z,1513206471.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:51.745Z,1513206471.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:52.108Z,1513206472.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:52.492Z,1513206472.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:52.541Z,1513206472.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:52.939Z,1513206472.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:53.338Z,1513206473.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:53.407Z,1513206473.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:53.698Z,1513206473.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:53.773Z,1513206473.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:54.079Z,1513206474.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:54.083Z,1513206474.083 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-13T23:02:53.9Z
2017-12-13T23:07:54.083Z,1513206474.083 [Default:CheckIn:Read_GPS] Stopped
2017-12-13T23:07:54.083Z,1513206474.083 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-13T23:07:54.482Z,1513206474.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:54.485Z,1513206474.485 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-12-13T23:07:54.569Z,1513206474.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:55.365Z,1513206475.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:55.489Z,1513206475.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:55.648Z,1513206475.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:55.769Z,1513206475.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:56.565Z,1513206476.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:57.361Z,1513206477.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:57.765Z,1513206477.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:58.561Z,1513206478.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:59.180Z,1513206479.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:59.257Z,1513206479.257 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20171213T225830/Courier0004.lzma
2017-12-13T23:07:59.318Z,1513206479.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:59.357Z,1513206479.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:07:59.647Z,1513206479.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:07:59.761Z,1513206479.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:00.007Z,1513206480.007 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Courier0004.lzma.bak
2017-12-13T23:08:00.007Z,1513206480.007 [DataOverHttps](INFO): SBD MOMSN=5436902
2017-12-13T23:08:00.072Z,1513206480.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:00.557Z,1513206480.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:01.291Z,1513206481.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:01.353Z,1513206481.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:01.424Z,1513206481.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:01.757Z,1513206481.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:02.558Z,1513206482.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:03.355Z,1513206483.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:03.761Z,1513206483.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:04.557Z,1513206484.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:04.939Z,1513206484.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:05.099Z,1513206485.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:05.355Z,1513206485.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:05.476Z,1513206485.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:05.761Z,1513206485.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:05.843Z,1513206485.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:06.278Z,1513206486.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:06.560Z,1513206486.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:06.642Z,1513206486.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:07.361Z,1513206487.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:07.765Z,1513206487.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:08.561Z,1513206488.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:09.360Z,1513206489.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:09.765Z,1513206489.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:10.546Z,1513206490.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:10.561Z,1513206490.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:10.621Z,1513206490.621 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20171213T225830/Express0005.lzma
2017-12-13T23:08:10.730Z,1513206490.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:11.048Z,1513206491.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:11.357Z,1513206491.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:11.761Z,1513206491.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:12.557Z,1513206492.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:13.353Z,1513206493.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:14.149Z,1513206494.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:14.947Z,1513206494.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:15.741Z,1513206495.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:16.537Z,1513206496.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:17.334Z,1513206497.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:18.129Z,1513206498.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:18.925Z,1513206498.925 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:19.721Z,1513206499.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:20.517Z,1513206500.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:21.313Z,1513206501.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:22.110Z,1513206502.110 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:22.907Z,1513206502.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:23.702Z,1513206503.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:24.497Z,1513206504.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:25.293Z,1513206505.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:26.089Z,1513206506.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:26.885Z,1513206506.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:27.681Z,1513206507.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:28.477Z,1513206508.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:29.273Z,1513206509.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:30.069Z,1513206510.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:30.865Z,1513206510.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:31.662Z,1513206511.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:32.457Z,1513206512.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:33.255Z,1513206513.255 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:33.905Z,1513206513.905 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Express0005.lzma.bak
2017-12-13T23:08:33.905Z,1513206513.905 [DataOverHttps](INFO): SBD MOMSN=5436904
2017-12-13T23:08:33.984Z,1513206513.984 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:08:33.984Z,1513206513.984 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:08:33.984Z,1513206513.984 [BPC1](ERROR): Communications Fault
2017-12-13T23:08:34.031Z,1513206514.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:34.050Z,1513206514.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:34.074Z,1513206514.074 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:08:34.453Z,1513206514.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:34.857Z,1513206514.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:35.263Z,1513206515.263 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:35.673Z,1513206515.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:35.704Z,1513206515.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:35.708Z,1513206515.708 [Default:CheckIn:Read_Iridium] Stopped
2017-12-13T23:08:35.708Z,1513206515.708 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-13T23:08:35.708Z,1513206515.708 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-13T23:08:35.858Z,1513206515.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:36.077Z,1513206516.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:36.481Z,1513206516.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:36.885Z,1513206516.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:37.289Z,1513206517.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:37.693Z,1513206517.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:38.097Z,1513206518.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:38.501Z,1513206518.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:38.907Z,1513206518.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:39.313Z,1513206519.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:39.462Z,1513206519.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:39.475Z,1513206519.475 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:08:39.475Z,1513206519.475 [BPC1] No Fault, FailCount= 1
2017-12-13T23:08:39.655Z,1513206519.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:39.717Z,1513206519.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:39.960Z,1513206519.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:40.376Z,1513206520.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:40.513Z,1513206520.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:40.736Z,1513206520.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:41.151Z,1513206521.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:41.309Z,1513206521.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:41.550Z,1513206521.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:41.713Z,1513206521.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:41.968Z,1513206521.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:42.334Z,1513206522.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:42.509Z,1513206522.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:42.745Z,1513206522.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:43.142Z,1513206523.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:43.308Z,1513206523.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:43.552Z,1513206523.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:43.713Z,1513206523.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:43.958Z,1513206523.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:44.357Z,1513206524.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:44.509Z,1513206524.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:44.757Z,1513206524.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:45.147Z,1513206525.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:45.305Z,1513206525.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:45.534Z,1513206525.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:45.709Z,1513206525.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:45.931Z,1513206525.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:45.978Z,1513206525.978 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-13T23:08:46.337Z,1513206526.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:46.505Z,1513206526.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:46.764Z,1513206526.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:47.142Z,1513206527.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:47.302Z,1513206527.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:47.551Z,1513206527.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:47.713Z,1513206527.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:47.987Z,1513206527.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:48.343Z,1513206528.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:48.509Z,1513206528.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:48.738Z,1513206528.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:49.146Z,1513206529.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:49.307Z,1513206529.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:49.540Z,1513206529.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:49.713Z,1513206529.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:49.986Z,1513206529.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:50.349Z,1513206530.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:50.512Z,1513206530.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:50.773Z,1513206530.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:51.146Z,1513206531.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:51.311Z,1513206531.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:51.551Z,1513206531.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:51.717Z,1513206531.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:51.936Z,1513206531.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:52.345Z,1513206532.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:52.513Z,1513206532.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:52.743Z,1513206532.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:53.199Z,1513206533.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:53.310Z,1513206533.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:53.573Z,1513206533.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:53.713Z,1513206533.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:53.943Z,1513206533.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-12-13T23:08:53.982Z,1513206533.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:54.351Z,1513206534.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:54.513Z,1513206534.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:54.773Z,1513206534.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:55.150Z,1513206535.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:55.309Z,1513206535.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:55.531Z,1513206535.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:55.713Z,1513206535.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:55.966Z,1513206535.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:56.383Z,1513206536.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:56.510Z,1513206536.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:56.756Z,1513206536.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:57.154Z,1513206537.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:57.305Z,1513206537.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:57.553Z,1513206537.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:57.710Z,1513206537.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:57.961Z,1513206537.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:58.326Z,1513206538.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:58.505Z,1513206538.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:58.807Z,1513206538.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:59.167Z,1513206539.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:59.301Z,1513206539.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:59.575Z,1513206539.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:08:59.706Z,1513206539.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:08:59.967Z,1513206539.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:00.374Z,1513206540.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:00.503Z,1513206540.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:00.741Z,1513206540.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:01.167Z,1513206541.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:01.298Z,1513206541.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:01.572Z,1513206541.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:01.713Z,1513206541.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:01.966Z,1513206541.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:02.379Z,1513206542.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:02.510Z,1513206542.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:02.786Z,1513206542.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:03.146Z,1513206543.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:03.306Z,1513206543.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:03.542Z,1513206543.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:03.709Z,1513206543.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:03.944Z,1513206543.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:04.342Z,1513206544.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:04.505Z,1513206544.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:04.752Z,1513206544.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:05.151Z,1513206545.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:05.301Z,1513206545.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:05.555Z,1513206545.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:05.705Z,1513206545.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:06.006Z,1513206546.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:06.353Z,1513206546.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:06.501Z,1513206546.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:06.757Z,1513206546.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:07.148Z,1513206547.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:07.297Z,1513206547.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:07.531Z,1513206547.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:07.701Z,1513206547.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:07.967Z,1513206547.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:08.371Z,1513206548.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:08.497Z,1513206548.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:08.753Z,1513206548.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:09.196Z,1513206549.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:09.293Z,1513206549.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:09.614Z,1513206549.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:09.947Z,1513206549.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:10.089Z,1513206550.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:10.335Z,1513206550.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:10.762Z,1513206550.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:10.885Z,1513206550.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:11.140Z,1513206551.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:11.681Z,1513206551.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:11.741Z,1513206551.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:11.963Z,1513206551.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:12.161Z,1513206552.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:12.365Z,1513206552.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:12.565Z,1513206552.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:12.734Z,1513206552.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:13.162Z,1513206553.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:13.361Z,1513206553.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:13.538Z,1513206553.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:13.765Z,1513206553.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:13.937Z,1513206553.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:14.342Z,1513206554.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:14.561Z,1513206554.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:14.746Z,1513206554.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:15.145Z,1513206555.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:15.357Z,1513206555.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:15.571Z,1513206555.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:15.761Z,1513206555.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:15.981Z,1513206555.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:16.348Z,1513206556.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:16.557Z,1513206556.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:16.787Z,1513206556.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:17.170Z,1513206557.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:17.354Z,1513206557.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:17.556Z,1513206557.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:17.757Z,1513206557.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:17.955Z,1513206557.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:18.341Z,1513206558.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:18.553Z,1513206558.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:18.751Z,1513206558.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:19.156Z,1513206559.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:19.350Z,1513206559.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:19.545Z,1513206559.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:19.753Z,1513206559.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:19.976Z,1513206559.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:20.388Z,1513206560.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:20.549Z,1513206560.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:20.758Z,1513206560.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:21.144Z,1513206561.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:21.345Z,1513206561.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:21.559Z,1513206561.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:21.749Z,1513206561.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:21.967Z,1513206561.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:22.383Z,1513206562.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:22.545Z,1513206562.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:22.753Z,1513206562.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:23.199Z,1513206563.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:23.341Z,1513206563.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:23.580Z,1513206563.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:23.745Z,1513206563.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:23.936Z,1513206563.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:24.362Z,1513206564.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:24.544Z,1513206564.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:24.736Z,1513206564.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:25.135Z,1513206565.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:25.338Z,1513206565.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:25.573Z,1513206565.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:25.741Z,1513206565.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:25.894Z,1513206565.894 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-13T23:09:25.894Z,1513206565.894 [NAL9602] Data Fault, FailCount= 1
2017-12-13T23:09:25.894Z,1513206565.894 [NAL9602](ERROR): Data Fault
2017-12-13T23:09:25.959Z,1513206565.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:25.974Z,1513206565.974 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-13T23:09:26.294Z,1513206566.294 [NAL9602](INFO): Powering down
2017-12-13T23:09:26.359Z,1513206566.359 [PNI_TCM](ERROR): CRC does not match. Expected:0x55857 got:0x29023
2017-12-13T23:09:26.425Z,1513206566.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:26.538Z,1513206566.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:26.752Z,1513206566.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:27.125Z,1513206567.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:27.170Z,1513206567.170 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-13T23:09:27.170Z,1513206567.170 [NAL9602] No Fault, FailCount= 1
2017-12-13T23:09:27.334Z,1513206567.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:27.558Z,1513206567.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:27.737Z,1513206567.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:27.936Z,1513206567.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:28.330Z,1513206568.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:28.534Z,1513206568.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:28.735Z,1513206568.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:29.177Z,1513206569.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:29.329Z,1513206569.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:29.543Z,1513206569.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:29.734Z,1513206569.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:29.964Z,1513206569.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:30.330Z,1513206570.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:30.529Z,1513206570.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:30.730Z,1513206570.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:31.143Z,1513206571.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:31.325Z,1513206571.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:31.535Z,1513206571.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:31.729Z,1513206571.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:31.958Z,1513206571.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:32.339Z,1513206572.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:32.525Z,1513206572.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:32.790Z,1513206572.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:33.144Z,1513206573.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:33.321Z,1513206573.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:33.550Z,1513206573.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:33.725Z,1513206573.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:33.945Z,1513206573.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:34.344Z,1513206574.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:34.521Z,1513206574.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:34.755Z,1513206574.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:35.135Z,1513206575.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:35.317Z,1513206575.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:35.544Z,1513206575.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:35.721Z,1513206575.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:35.944Z,1513206575.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:36.351Z,1513206576.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:36.517Z,1513206576.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:37.313Z,1513206577.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:37.717Z,1513206577.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:38.513Z,1513206578.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:39.311Z,1513206579.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:39.717Z,1513206579.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:39.826Z,1513206579.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:39.978Z,1513206579.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:40.309Z,1513206580.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:40.517Z,1513206580.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:40.707Z,1513206580.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:41.097Z,1513206581.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:41.313Z,1513206581.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:41.499Z,1513206581.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:41.717Z,1513206581.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:41.903Z,1513206581.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:42.303Z,1513206582.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:42.513Z,1513206582.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:42.709Z,1513206582.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:43.105Z,1513206583.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:43.310Z,1513206583.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:43.516Z,1513206583.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:43.713Z,1513206583.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:43.888Z,1513206583.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:44.315Z,1513206584.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:44.509Z,1513206584.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:44.731Z,1513206584.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:45.142Z,1513206585.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:45.306Z,1513206585.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:45.542Z,1513206585.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:45.709Z,1513206585.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:45.903Z,1513206585.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:46.329Z,1513206586.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:46.505Z,1513206586.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:46.707Z,1513206586.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:47.151Z,1513206587.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:47.301Z,1513206587.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:47.508Z,1513206587.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:47.705Z,1513206587.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:47.903Z,1513206587.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:48.298Z,1513206588.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:48.501Z,1513206588.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:48.786Z,1513206588.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:49.123Z,1513206589.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:49.297Z,1513206589.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:49.519Z,1513206589.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:49.701Z,1513206589.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:49.895Z,1513206589.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:50.299Z,1513206590.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:50.497Z,1513206590.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:50.695Z,1513206590.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:51.098Z,1513206591.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:51.293Z,1513206591.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:51.498Z,1513206591.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:51.697Z,1513206591.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:51.948Z,1513206591.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:52.307Z,1513206592.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:52.493Z,1513206592.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:52.696Z,1513206592.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:53.097Z,1513206593.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:53.289Z,1513206593.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:53.519Z,1513206593.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:53.693Z,1513206593.693 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:53.896Z,1513206593.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:54.297Z,1513206594.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:54.489Z,1513206594.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:54.696Z,1513206594.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:55.187Z,1513206595.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:55.286Z,1513206595.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:55.520Z,1513206595.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:55.689Z,1513206595.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:55.899Z,1513206595.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:56.299Z,1513206596.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:56.485Z,1513206596.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:56.667Z,1513206596.667 [NAL9602](INFO): Powering up NAL9602
2017-12-13T23:09:56.700Z,1513206596.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:57.098Z,1513206597.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:57.283Z,1513206597.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:57.498Z,1513206597.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:57.797Z,1513206597.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:57.900Z,1513206597.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:58.343Z,1513206598.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:58.593Z,1513206598.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:58.715Z,1513206598.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:59.101Z,1513206599.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:59.389Z,1513206599.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:59.507Z,1513206599.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:09:59.793Z,1513206599.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:09:59.904Z,1513206599.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:00.305Z,1513206600.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:00.589Z,1513206600.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:00.708Z,1513206600.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:01.110Z,1513206601.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:01.369Z,1513206601.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:01.557Z,1513206601.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:01.914Z,1513206601.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:02.165Z,1513206602.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:02.418Z,1513206602.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:02.691Z,1513206602.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:02.962Z,1513206602.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:03.095Z,1513206603.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:03.373Z,1513206603.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:03.496Z,1513206603.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:03.899Z,1513206603.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:04.169Z,1513206604.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:04.293Z,1513206604.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:04.782Z,1513206604.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:04.966Z,1513206604.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:05.121Z,1513206605.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:05.373Z,1513206605.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:05.502Z,1513206605.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:05.897Z,1513206605.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:06.169Z,1513206606.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:06.295Z,1513206606.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:06.702Z,1513206606.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:06.966Z,1513206606.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:07.156Z,1513206607.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:07.373Z,1513206607.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:07.500Z,1513206607.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:07.859Z,1513206607.859 [NAL9602](INFO): NAL9602 initialized
2017-12-13T23:10:07.975Z,1513206607.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:08.170Z,1513206608.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:08.326Z,1513206608.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:08.735Z,1513206608.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:08.967Z,1513206608.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:09.109Z,1513206609.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:09.510Z,1513206609.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:09.745Z,1513206609.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:09.900Z,1513206609.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:10.299Z,1513206610.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:10.542Z,1513206610.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:10.701Z,1513206610.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:11.101Z,1513206611.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:11.338Z,1513206611.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:11.507Z,1513206611.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:11.741Z,1513206611.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:11.912Z,1513206611.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:12.299Z,1513206612.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:12.537Z,1513206612.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:12.706Z,1513206612.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:13.102Z,1513206613.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:13.334Z,1513206613.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:13.556Z,1513206613.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:13.797Z,1513206613.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:13.891Z,1513206613.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:14.303Z,1513206614.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:14.593Z,1513206614.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:14.712Z,1513206614.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:15.108Z,1513206615.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:15.369Z,1513206615.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:15.511Z,1513206615.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:15.903Z,1513206615.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:16.165Z,1513206616.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:16.299Z,1513206616.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:16.696Z,1513206616.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:16.962Z,1513206616.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:17.152Z,1513206617.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:17.373Z,1513206617.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:17.513Z,1513206617.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:17.909Z,1513206617.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:18.170Z,1513206618.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:18.312Z,1513206618.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:18.703Z,1513206618.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:18.966Z,1513206618.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:19.100Z,1513206619.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:19.373Z,1513206619.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:19.526Z,1513206619.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:19.900Z,1513206619.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:20.170Z,1513206620.170 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:20.319Z,1513206620.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:20.750Z,1513206620.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:20.966Z,1513206620.966 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:21.119Z,1513206621.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:21.373Z,1513206621.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:21.499Z,1513206621.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:21.900Z,1513206621.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:22.169Z,1513206622.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:22.336Z,1513206622.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:22.687Z,1513206622.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:22.967Z,1513206622.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:23.107Z,1513206623.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:23.425Z,1513206623.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:23.522Z,1513206623.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:23.953Z,1513206623.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:24.221Z,1513206624.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:24.323Z,1513206624.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:24.697Z,1513206624.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:25.017Z,1513206625.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:25.103Z,1513206625.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:25.498Z,1513206625.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:25.709Z,1513206625.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:25.895Z,1513206625.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:26.301Z,1513206626.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:26.505Z,1513206626.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:26.704Z,1513206626.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:27.148Z,1513206627.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:27.303Z,1513206627.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:27.506Z,1513206627.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:27.729Z,1513206627.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:27.902Z,1513206627.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:28.303Z,1513206628.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:28.525Z,1513206628.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:28.702Z,1513206628.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:29.169Z,1513206629.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:29.322Z,1513206629.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:29.516Z,1513206629.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:29.725Z,1513206629.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:29.951Z,1513206629.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:30.302Z,1513206630.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:30.521Z,1513206630.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:30.724Z,1513206630.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:31.110Z,1513206631.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:31.317Z,1513206631.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:31.510Z,1513206631.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:31.721Z,1513206631.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:31.906Z,1513206631.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:32.316Z,1513206632.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:32.517Z,1513206632.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:32.710Z,1513206632.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:33.115Z,1513206633.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:33.313Z,1513206633.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:33.577Z,1513206633.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:33.717Z,1513206633.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:33.907Z,1513206633.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:34.303Z,1513206634.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:34.513Z,1513206634.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:34.710Z,1513206634.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:35.113Z,1513206635.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:35.310Z,1513206635.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:35.511Z,1513206635.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:35.713Z,1513206635.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:35.920Z,1513206635.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:36.311Z,1513206636.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:36.509Z,1513206636.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:36.716Z,1513206636.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:37.305Z,1513206637.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:37.709Z,1513206637.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:38.505Z,1513206638.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:39.302Z,1513206639.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:39.729Z,1513206639.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:40.170Z,1513206640.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:40.300Z,1513206640.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:40.525Z,1513206640.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:40.662Z,1513206640.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:41.070Z,1513206641.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:41.322Z,1513206641.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:41.456Z,1513206641.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:41.725Z,1513206641.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:41.835Z,1513206641.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:42.238Z,1513206642.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:42.521Z,1513206642.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:42.635Z,1513206642.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:43.044Z,1513206643.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:43.317Z,1513206643.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:43.455Z,1513206643.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:43.721Z,1513206643.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:43.855Z,1513206643.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:44.244Z,1513206644.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:44.517Z,1513206644.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:44.638Z,1513206644.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:45.046Z,1513206645.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:45.313Z,1513206645.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:45.431Z,1513206645.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:45.717Z,1513206645.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:45.860Z,1513206645.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:46.275Z,1513206646.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:46.513Z,1513206646.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:46.658Z,1513206646.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:47.063Z,1513206647.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:47.309Z,1513206647.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:47.435Z,1513206647.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:47.713Z,1513206647.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:47.834Z,1513206647.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:48.230Z,1513206648.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:48.509Z,1513206648.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:48.644Z,1513206648.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:49.052Z,1513206649.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:49.052Z,1513206649.052 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-12-13T23:10:49.052Z,1513206649.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:10:49.054Z,1513206649.054 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:49.054Z,1513206649.054 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2017-12-13T23:10:49.054Z,1513206649.054 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:10:49.056Z,1513206649.056 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:49.056Z,1513206649.056 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-12-13T23:10:49.056Z,1513206649.056 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:10:49.068Z,1513206649.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:10:49.068Z,1513206649.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:10:49.068Z,1513206649.068 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:10:49.306Z,1513206649.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:49.550Z,1513206649.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:10:49.550Z,1513206649.550 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-12-13T23:10:49.550Z,1513206649.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:10:49.551Z,1513206649.551 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2017-12-13T23:10:49.551Z,1513206649.551 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:10:49.551Z,1513206649.551 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-12-13T23:10:49.709Z,1513206649.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:49.866Z,1513206649.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:10:49.867Z,1513206649.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:10:49.867Z,1513206649.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:10:49.868Z,1513206649.868 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:10:49.868Z,1513206649.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:10:49.868Z,1513206649.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:10:49.869Z,1513206649.869 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:10:49.869Z,1513206649.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:10:49.869Z,1513206649.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:10:50.239Z,1513206650.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:50.508Z,1513206650.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:50.642Z,1513206650.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:51.104Z,1513206651.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:51.301Z,1513206651.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:51.440Z,1513206651.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:51.705Z,1513206651.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:51.860Z,1513206651.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:52.249Z,1513206652.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:52.501Z,1513206652.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:52.747Z,1513206652.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:53.051Z,1513206653.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:53.299Z,1513206653.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:53.486Z,1513206653.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:53.713Z,1513206653.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:53.839Z,1513206653.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:54.241Z,1513206654.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:54.509Z,1513206654.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:54.643Z,1513206654.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:55.047Z,1513206655.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:55.306Z,1513206655.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:55.453Z,1513206655.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:55.716Z,1513206655.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:55.891Z,1513206655.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:56.238Z,1513206656.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:56.509Z,1513206656.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:56.647Z,1513206656.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:57.051Z,1513206657.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:57.305Z,1513206657.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:57.451Z,1513206657.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:57.709Z,1513206657.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:57.846Z,1513206657.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:58.252Z,1513206658.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:58.505Z,1513206658.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:58.651Z,1513206658.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:59.100Z,1513206659.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:59.334Z,1513206659.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:59.443Z,1513206659.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:10:59.737Z,1513206659.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:10:59.859Z,1513206659.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:00.252Z,1513206660.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:00.536Z,1513206660.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:00.656Z,1513206660.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:01.072Z,1513206661.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:01.329Z,1513206661.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:01.510Z,1513206661.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:01.734Z,1513206661.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:01.848Z,1513206661.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:02.277Z,1513206662.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:02.529Z,1513206662.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:02.647Z,1513206662.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:03.043Z,1513206663.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:03.325Z,1513206663.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:03.445Z,1513206663.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:03.729Z,1513206663.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:03.843Z,1513206663.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:04.245Z,1513206664.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:04.525Z,1513206664.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:04.650Z,1513206664.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:05.076Z,1513206665.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:05.321Z,1513206665.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:05.454Z,1513206665.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:05.725Z,1513206665.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:05.839Z,1513206665.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:06.241Z,1513206666.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:06.521Z,1513206666.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:06.636Z,1513206666.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:07.053Z,1513206667.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:07.319Z,1513206667.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:07.463Z,1513206667.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:07.727Z,1513206667.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:07.847Z,1513206667.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:08.245Z,1513206668.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:08.521Z,1513206668.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:08.690Z,1513206668.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:09.046Z,1513206669.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:09.318Z,1513206669.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:09.447Z,1513206669.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:09.721Z,1513206669.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:09.845Z,1513206669.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:10.252Z,1513206670.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:10.517Z,1513206670.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:10.656Z,1513206670.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:11.065Z,1513206671.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:11.313Z,1513206671.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:11.442Z,1513206671.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:11.717Z,1513206671.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:11.865Z,1513206671.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:12.283Z,1513206672.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:12.513Z,1513206672.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:12.638Z,1513206672.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:13.044Z,1513206673.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:13.309Z,1513206673.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:13.482Z,1513206673.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:13.713Z,1513206673.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:13.855Z,1513206673.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:14.240Z,1513206674.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:14.509Z,1513206674.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:14.675Z,1513206674.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:15.038Z,1513206675.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:15.305Z,1513206675.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:15.499Z,1513206675.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:15.709Z,1513206675.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:15.844Z,1513206675.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:16.256Z,1513206676.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:16.505Z,1513206676.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:16.652Z,1513206676.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:17.050Z,1513206677.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:17.301Z,1513206677.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:17.444Z,1513206677.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:17.705Z,1513206677.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:17.852Z,1513206677.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:18.288Z,1513206678.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:18.501Z,1513206678.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:18.652Z,1513206678.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:19.094Z,1513206679.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:19.297Z,1513206679.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:19.461Z,1513206679.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:19.701Z,1513206679.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:19.866Z,1513206679.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:20.244Z,1513206680.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:20.499Z,1513206680.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:20.675Z,1513206680.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:21.067Z,1513206681.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:21.295Z,1513206681.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:21.486Z,1513206681.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:21.734Z,1513206681.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:21.843Z,1513206681.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:22.255Z,1513206682.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:22.529Z,1513206682.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:22.653Z,1513206682.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:23.096Z,1513206683.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:23.326Z,1513206683.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:23.448Z,1513206683.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:23.773Z,1513206683.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:23.883Z,1513206683.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:24.242Z,1513206684.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:24.571Z,1513206684.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:24.641Z,1513206684.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:25.063Z,1513206685.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:25.365Z,1513206685.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:25.474Z,1513206685.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:25.769Z,1513206685.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:25.859Z,1513206685.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:26.251Z,1513206686.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:26.565Z,1513206686.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:26.659Z,1513206686.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:27.100Z,1513206687.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:27.362Z,1513206687.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:27.454Z,1513206687.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:27.765Z,1513206687.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:27.922Z,1513206687.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:28.240Z,1513206688.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:28.561Z,1513206688.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:28.669Z,1513206688.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:29.040Z,1513206689.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:29.357Z,1513206689.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:29.450Z,1513206689.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:29.761Z,1513206689.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:29.851Z,1513206689.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:30.238Z,1513206690.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:30.574Z,1513206690.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:30.674Z,1513206690.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:31.080Z,1513206691.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:31.369Z,1513206691.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:31.474Z,1513206691.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:31.773Z,1513206691.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:31.855Z,1513206691.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:32.244Z,1513206692.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:32.573Z,1513206692.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:32.649Z,1513206692.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:33.091Z,1513206693.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:33.369Z,1513206693.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:33.456Z,1513206693.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:33.773Z,1513206693.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:33.859Z,1513206693.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:34.280Z,1513206694.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:34.573Z,1513206694.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:34.679Z,1513206694.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:35.097Z,1513206695.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:35.372Z,1513206695.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:35.516Z,1513206695.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:35.782Z,1513206695.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:35.988Z,1513206695.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:36.300Z,1513206696.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:36.577Z,1513206696.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:36.706Z,1513206696.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:37.078Z,1513206697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:37.374Z,1513206697.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:37.777Z,1513206697.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:38.573Z,1513206698.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:39.369Z,1513206699.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:39.773Z,1513206699.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:40.569Z,1513206700.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:41.366Z,1513206701.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:41.769Z,1513206701.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:42.566Z,1513206702.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:42.808Z,1513206702.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:43.092Z,1513206703.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:43.358Z,1513206703.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:43.362Z,1513206703.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:43.761Z,1513206703.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:43.765Z,1513206703.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:44.162Z,1513206704.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:44.559Z,1513206704.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:44.561Z,1513206704.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:45.029Z,1513206705.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:45.358Z,1513206705.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:45.369Z,1513206705.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:45.732Z,1513206705.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:45.761Z,1513206705.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:46.135Z,1513206706.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:46.547Z,1513206706.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:46.557Z,1513206706.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:46.941Z,1513206706.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:47.353Z,1513206707.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:47.411Z,1513206707.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:47.739Z,1513206707.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:47.757Z,1513206707.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:48.131Z,1513206708.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:48.549Z,1513206708.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:48.561Z,1513206708.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:48.951Z,1513206708.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:49.357Z,1513206709.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:49.391Z,1513206709.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:49.783Z,1513206709.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:49.785Z,1513206709.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:50.143Z,1513206710.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:50.582Z,1513206710.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:50.624Z,1513206710.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:51.011Z,1513206711.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:51.378Z,1513206711.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:51.408Z,1513206711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:51.744Z,1513206711.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:51.781Z,1513206711.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:52.182Z,1513206712.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:52.542Z,1513206712.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:52.578Z,1513206712.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:53.012Z,1513206713.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:53.373Z,1513206713.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:53.409Z,1513206713.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:53.751Z,1513206713.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:53.777Z,1513206713.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:54.160Z,1513206714.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:54.574Z,1513206714.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:54.577Z,1513206714.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:55.016Z,1513206715.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:55.368Z,1513206715.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:55.369Z,1513206715.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:55.766Z,1513206715.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:55.774Z,1513206715.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:56.157Z,1513206716.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:56.540Z,1513206716.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:56.569Z,1513206716.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:57.015Z,1513206717.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:57.361Z,1513206717.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:57.365Z,1513206717.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:57.758Z,1513206717.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:57.769Z,1513206717.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:58.168Z,1513206718.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:58.565Z,1513206718.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:58.569Z,1513206718.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:59.011Z,1513206719.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:59.361Z,1513206719.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:59.375Z,1513206719.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:11:59.765Z,1513206719.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:11:59.775Z,1513206719.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:00.151Z,1513206720.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:00.551Z,1513206720.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:00.561Z,1513206720.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:00.940Z,1513206720.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:01.358Z,1513206721.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:01.374Z,1513206721.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:01.761Z,1513206721.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:01.831Z,1513206721.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:02.161Z,1513206722.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:02.543Z,1513206722.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:02.557Z,1513206722.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:03.011Z,1513206723.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:03.354Z,1513206723.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:03.392Z,1513206723.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:03.772Z,1513206723.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:03.790Z,1513206723.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:04.172Z,1513206724.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:04.535Z,1513206724.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:04.585Z,1513206724.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:04.979Z,1513206724.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:05.374Z,1513206725.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:05.382Z,1513206725.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:05.749Z,1513206725.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:05.786Z,1513206725.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:06.137Z,1513206726.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:06.540Z,1513206726.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:06.581Z,1513206726.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:07.035Z,1513206727.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:07.362Z,1513206727.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:07.377Z,1513206727.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:07.737Z,1513206727.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:07.781Z,1513206727.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:08.130Z,1513206728.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:08.531Z,1513206728.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:08.577Z,1513206728.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:08.996Z,1513206728.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:09.337Z,1513206729.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:09.373Z,1513206729.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:09.777Z,1513206729.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:09.785Z,1513206729.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:10.126Z,1513206730.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:10.528Z,1513206730.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:10.573Z,1513206730.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:11.003Z,1513206731.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:11.341Z,1513206731.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:11.369Z,1513206731.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:11.773Z,1513206731.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:11.776Z,1513206731.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:12.129Z,1513206732.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:12.531Z,1513206732.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:12.569Z,1513206732.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:13.023Z,1513206733.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:13.365Z,1513206733.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:13.387Z,1513206733.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:13.792Z,1513206733.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:14.137Z,1513206734.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:14.161Z,1513206734.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:14.538Z,1513206734.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:14.945Z,1513206734.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:14.958Z,1513206734.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:15.391Z,1513206735.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:15.744Z,1513206735.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:15.753Z,1513206735.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:16.138Z,1513206736.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:16.543Z,1513206736.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:16.550Z,1513206736.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:16.944Z,1513206736.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:17.346Z,1513206737.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:17.361Z,1513206737.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:17.757Z,1513206737.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:18.131Z,1513206738.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:18.141Z,1513206738.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:18.535Z,1513206738.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:18.937Z,1513206738.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:18.950Z,1513206738.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:19.361Z,1513206739.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:19.734Z,1513206739.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:19.822Z,1513206739.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:20.131Z,1513206740.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:20.529Z,1513206740.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:20.540Z,1513206740.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:20.990Z,1513206740.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:21.325Z,1513206741.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:21.339Z,1513206741.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:21.746Z,1513206741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:22.123Z,1513206742.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:22.218Z,1513206742.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:22.545Z,1513206742.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:22.919Z,1513206742.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:22.991Z,1513206742.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:23.349Z,1513206743.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:23.714Z,1513206743.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:23.775Z,1513206743.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:24.128Z,1513206744.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:24.510Z,1513206744.510 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:24.528Z,1513206744.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:24.974Z,1513206744.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:25.007Z,1513206745.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:25.377Z,1513206745.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:25.435Z,1513206745.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:25.782Z,1513206745.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:25.799Z,1513206745.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:26.184Z,1513206746.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:26.185Z,1513206746.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:26.551Z,1513206746.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:26.589Z,1513206746.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:26.993Z,1513206746.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:27.010Z,1513206747.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:27.392Z,1513206747.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:27.397Z,1513206747.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:27.743Z,1513206747.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:27.801Z,1513206747.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:28.124Z,1513206748.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:28.539Z,1513206748.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:28.598Z,1513206748.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:29.025Z,1513206749.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:29.347Z,1513206749.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:29.393Z,1513206749.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:29.766Z,1513206749.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:29.797Z,1513206749.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:30.146Z,1513206750.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:30.551Z,1513206750.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:30.593Z,1513206750.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:30.959Z,1513206750.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:31.389Z,1513206751.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:31.395Z,1513206751.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:31.763Z,1513206751.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:31.793Z,1513206751.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:32.138Z,1513206752.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:32.534Z,1513206752.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:32.589Z,1513206752.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:32.939Z,1513206752.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:33.360Z,1513206753.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:33.386Z,1513206753.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:33.739Z,1513206753.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:33.789Z,1513206753.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:34.136Z,1513206754.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:34.556Z,1513206754.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:34.585Z,1513206754.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:35.034Z,1513206755.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:35.380Z,1513206755.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:35.381Z,1513206755.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:35.785Z,1513206755.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:35.792Z,1513206755.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:36.143Z,1513206756.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:36.555Z,1513206756.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:36.582Z,1513206756.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:37.025Z,1513206757.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:37.377Z,1513206757.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:37.402Z,1513206757.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:37.781Z,1513206757.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:38.577Z,1513206758.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:39.374Z,1513206759.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:39.777Z,1513206759.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:40.573Z,1513206760.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:41.371Z,1513206761.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:41.777Z,1513206761.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:42.574Z,1513206762.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:43.371Z,1513206763.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:43.777Z,1513206763.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:43.984Z,1513206763.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:44.136Z,1513206764.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:44.487Z,1513206764.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:44.573Z,1513206764.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:44.894Z,1513206764.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:45.351Z,1513206765.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:45.370Z,1513206765.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:45.686Z,1513206765.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:45.773Z,1513206765.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:46.109Z,1513206766.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:46.495Z,1513206766.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:46.569Z,1513206766.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:46.898Z,1513206766.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:47.328Z,1513206767.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:47.366Z,1513206767.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:47.689Z,1513206767.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:47.769Z,1513206767.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:48.109Z,1513206768.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:48.470Z,1513206768.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:48.566Z,1513206768.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:48.871Z,1513206768.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:49.291Z,1513206769.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:49.362Z,1513206769.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:49.698Z,1513206769.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:49.766Z,1513206769.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:50.101Z,1513206770.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:50.470Z,1513206770.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:50.561Z,1513206770.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:50.851Z,1513206770.851 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:12:50.851Z,1513206770.851 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:12:50.851Z,1513206770.851 [BPC1](ERROR): Communications Fault
2017-12-13T23:12:50.863Z,1513206770.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:50.957Z,1513206770.957 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:12:51.271Z,1513206771.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:51.358Z,1513206771.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:51.683Z,1513206771.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:51.762Z,1513206771.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:52.118Z,1513206772.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:52.151Z,1513206772.151 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:12:52.151Z,1513206772.151 [BPC1] No Fault, FailCount= 1
2017-12-13T23:12:52.558Z,1513206772.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:52.575Z,1513206772.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:52.888Z,1513206772.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:53.280Z,1513206773.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:53.354Z,1513206773.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:53.672Z,1513206773.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:53.758Z,1513206773.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:54.075Z,1513206774.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:54.474Z,1513206774.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:54.553Z,1513206774.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:54.958Z,1513206774.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:55.288Z,1513206775.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:55.352Z,1513206775.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:55.692Z,1513206775.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:55.757Z,1513206775.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:56.115Z,1513206776.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:56.490Z,1513206776.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:56.561Z,1513206776.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:56.876Z,1513206776.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:57.279Z,1513206777.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:57.357Z,1513206777.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:57.674Z,1513206777.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:57.762Z,1513206777.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:58.091Z,1513206778.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:58.494Z,1513206778.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:58.558Z,1513206778.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:58.900Z,1513206778.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:59.354Z,1513206779.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:12:59.360Z,1513206779.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:59.671Z,1513206779.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:12:59.829Z,1513206779.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:00.084Z,1513206780.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:00.498Z,1513206780.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:00.625Z,1513206780.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:00.886Z,1513206780.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:01.353Z,1513206781.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:01.421Z,1513206781.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:01.699Z,1513206781.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:01.826Z,1513206781.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:02.071Z,1513206782.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:02.463Z,1513206782.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:02.622Z,1513206782.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:02.884Z,1513206782.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:03.288Z,1513206783.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:03.420Z,1513206783.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:03.667Z,1513206783.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:03.826Z,1513206783.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:04.077Z,1513206784.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:04.498Z,1513206784.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:04.621Z,1513206784.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:04.987Z,1513206784.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:05.251Z,1513206785.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:05.420Z,1513206785.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:05.674Z,1513206785.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:05.828Z,1513206785.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:06.088Z,1513206786.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:06.492Z,1513206786.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:06.621Z,1513206786.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:06.857Z,1513206786.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:07.303Z,1513206787.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:07.382Z,1513206787.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:07.710Z,1513206787.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:08.079Z,1513206788.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:08.178Z,1513206788.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:08.487Z,1513206788.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:08.941Z,1513206788.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:08.974Z,1513206788.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:09.307Z,1513206789.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:09.410Z,1513206789.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:09.690Z,1513206789.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:10.095Z,1513206790.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:10.205Z,1513206790.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:10.463Z,1513206790.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:10.890Z,1513206790.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:11.005Z,1513206791.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:11.267Z,1513206791.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:11.453Z,1513206791.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:11.706Z,1513206791.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:12.075Z,1513206792.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:12.250Z,1513206792.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:12.505Z,1513206792.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:12.864Z,1513206792.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:13.047Z,1513206793.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:13.403Z,1513206793.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:13.696Z,1513206793.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:13.761Z,1513206793.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:14.126Z,1513206794.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:14.483Z,1513206794.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:14.558Z,1513206794.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:14.903Z,1513206794.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:15.349Z,1513206795.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:15.353Z,1513206795.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:15.685Z,1513206795.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:15.758Z,1513206795.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:16.118Z,1513206796.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:16.499Z,1513206796.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:16.554Z,1513206796.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:16.981Z,1513206796.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:17.293Z,1513206797.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:17.350Z,1513206797.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:17.697Z,1513206797.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:17.753Z,1513206797.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:18.092Z,1513206798.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:18.482Z,1513206798.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:18.549Z,1513206798.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:18.855Z,1513206798.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:19.291Z,1513206799.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:19.347Z,1513206799.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:19.734Z,1513206799.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:19.749Z,1513206799.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:20.078Z,1513206800.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:20.484Z,1513206800.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:20.546Z,1513206800.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:20.957Z,1513206800.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:21.264Z,1513206801.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:21.342Z,1513206801.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:21.663Z,1513206801.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:21.746Z,1513206801.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:22.103Z,1513206802.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:22.523Z,1513206802.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:22.541Z,1513206802.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:22.981Z,1513206802.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:23.276Z,1513206803.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:23.337Z,1513206803.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:23.651Z,1513206803.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:23.741Z,1513206803.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:24.052Z,1513206804.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:24.500Z,1513206804.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:24.537Z,1513206804.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:24.894Z,1513206804.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:25.307Z,1513206805.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:25.335Z,1513206805.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:25.694Z,1513206805.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:25.741Z,1513206805.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:26.078Z,1513206806.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:26.493Z,1513206806.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:26.538Z,1513206806.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:26.891Z,1513206806.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:27.334Z,1513206807.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:27.376Z,1513206807.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:27.652Z,1513206807.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:27.753Z,1513206807.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:28.098Z,1513206808.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:28.478Z,1513206808.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:28.550Z,1513206808.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:28.900Z,1513206808.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:29.327Z,1513206809.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:29.345Z,1513206809.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:29.696Z,1513206809.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:29.762Z,1513206809.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:30.089Z,1513206810.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:30.467Z,1513206810.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:30.557Z,1513206810.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:30.860Z,1513206810.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:31.256Z,1513206811.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:31.353Z,1513206811.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:31.714Z,1513206811.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:31.981Z,1513206811.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:32.111Z,1513206812.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:32.487Z,1513206812.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:32.778Z,1513206812.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:32.927Z,1513206812.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:33.273Z,1513206813.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:33.406Z,1513206813.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:33.679Z,1513206813.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:34.068Z,1513206814.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:34.201Z,1513206814.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:34.487Z,1513206814.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:34.876Z,1513206814.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:34.997Z,1513206814.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:35.322Z,1513206815.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:35.430Z,1513206815.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:35.739Z,1513206815.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:36.114Z,1513206816.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:36.122Z,1513206816.122 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-13T23:13:36.122Z,1513206816.122 [Default:CheckIn:C.Wait] Stopped
2017-12-13T23:13:36.122Z,1513206816.122 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-13T23:13:36.122Z,1513206816.122 [Default:CheckIn:D] Running Loop=1
2017-12-13T23:13:36.226Z,1513206816.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:36.485Z,1513206816.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:36.490Z,1513206816.490 [Default:CheckIn:D] Stopped
2017-12-13T23:13:36.490Z,1513206816.490 [Default:CheckIn:E] Running Loop=1
2017-12-13T23:13:36.887Z,1513206816.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:36.923Z,1513206816.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.935843 min 
2017-12-13T23:13:36.948Z,1513206816.948 [Default:CheckIn:E] Stopped
2017-12-13T23:13:36.948Z,1513206816.948 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn] Stopped
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn](INFO): Running loop #2
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn] Running Loop=2
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-13T23:13:36.957Z,1513206816.957 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-13T23:13:37.022Z,1513206817.022 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:37.257Z,1513206817.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:37.425Z,1513206817.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:37.691Z,1513206817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:38.221Z,1513206818.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:39.019Z,1513206819.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:39.457Z,1513206819.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:40.253Z,1513206820.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:41.049Z,1513206821.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:41.745Z,1513206821.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:42.542Z,1513206822.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:43.337Z,1513206823.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:43.746Z,1513206823.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:44.264Z,1513206824.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:44.445Z,1513206824.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:44.544Z,1513206824.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:44.799Z,1513206824.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:45.203Z,1513206825.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:45.339Z,1513206825.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:45.625Z,1513206825.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:45.746Z,1513206825.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:46.033Z,1513206826.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:46.427Z,1513206826.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:46.542Z,1513206826.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:46.794Z,1513206826.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:47.186Z,1513206827.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:47.338Z,1513206827.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:47.587Z,1513206827.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:47.743Z,1513206827.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:48.037Z,1513206828.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:48.063Z,1513206828.063 [CBIT](INFO): Clearing failed state for component DropWeight
2017-12-13T23:13:48.063Z,1513206828.063 [DropWeight] No Fault, FailCount= 1
2017-12-13T23:13:48.412Z,1513206828.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:48.538Z,1513206828.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:48.850Z,1513206828.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:49.228Z,1513206829.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:49.334Z,1513206829.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:49.622Z,1513206829.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:49.737Z,1513206829.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:50.035Z,1513206830.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:50.035Z,1513206830.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2017-12-13T23:13:50.035Z,1513206830.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:13:50.041Z,1513206830.041 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:50.041Z,1513206830.041 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2017-12-13T23:13:50.042Z,1513206830.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:13:50.043Z,1513206830.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:50.043Z,1513206830.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-12-13T23:13:50.044Z,1513206830.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:13:50.116Z,1513206830.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:13:50.116Z,1513206830.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:13:50.116Z,1513206830.116 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:13:50.466Z,1513206830.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:13:50.466Z,1513206830.466 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2017-12-13T23:13:50.467Z,1513206830.467 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:13:50.467Z,1513206830.467 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2017-12-13T23:13:50.467Z,1513206830.467 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:13:50.467Z,1513206830.467 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-12-13T23:13:50.534Z,1513206830.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:50.797Z,1513206830.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:13:50.798Z,1513206830.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:13:50.798Z,1513206830.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:13:50.798Z,1513206830.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:13:50.799Z,1513206830.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:13:50.799Z,1513206830.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:13:50.799Z,1513206830.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:13:50.800Z,1513206830.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:13:50.800Z,1513206830.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:13:51.187Z,1513206831.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:51.330Z,1513206831.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:51.625Z,1513206831.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:51.734Z,1513206831.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:51.998Z,1513206831.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:52.481Z,1513206832.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:52.530Z,1513206832.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:52.803Z,1513206832.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:53.232Z,1513206833.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:53.326Z,1513206833.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:53.595Z,1513206833.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:53.730Z,1513206833.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:53.991Z,1513206833.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:54.409Z,1513206834.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:54.525Z,1513206834.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:54.794Z,1513206834.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:55.210Z,1513206835.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:55.322Z,1513206835.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:55.651Z,1513206835.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:55.757Z,1513206835.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:55.998Z,1513206835.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:56.402Z,1513206836.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:56.554Z,1513206836.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:56.801Z,1513206836.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:57.297Z,1513206837.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:57.350Z,1513206837.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:57.612Z,1513206837.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:57.753Z,1513206837.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:58.060Z,1513206838.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:58.455Z,1513206838.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:58.549Z,1513206838.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:58.850Z,1513206838.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:59.236Z,1513206839.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:59.346Z,1513206839.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:13:59.622Z,1513206839.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:13:59.749Z,1513206839.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:00.028Z,1513206840.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:00.426Z,1513206840.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:00.545Z,1513206840.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:00.788Z,1513206840.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:01.221Z,1513206841.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:01.342Z,1513206841.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:01.603Z,1513206841.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:01.745Z,1513206841.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:02.008Z,1513206842.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:02.435Z,1513206842.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:02.541Z,1513206842.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:02.782Z,1513206842.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:03.179Z,1513206843.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:03.339Z,1513206843.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:03.599Z,1513206843.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:03.741Z,1513206843.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:04.014Z,1513206844.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:04.391Z,1513206844.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:04.538Z,1513206844.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:04.814Z,1513206844.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:05.213Z,1513206845.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:05.334Z,1513206845.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:05.687Z,1513206845.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:05.738Z,1513206845.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:06.011Z,1513206846.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:06.425Z,1513206846.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:06.534Z,1513206846.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:06.821Z,1513206846.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:07.191Z,1513206847.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:07.329Z,1513206847.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:07.623Z,1513206847.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:07.734Z,1513206847.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:08.000Z,1513206848.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:08.417Z,1513206848.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:08.529Z,1513206848.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:08.827Z,1513206848.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:09.181Z,1513206849.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:09.326Z,1513206849.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:09.583Z,1513206849.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:09.729Z,1513206849.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:10.008Z,1513206850.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:10.406Z,1513206850.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:10.526Z,1513206850.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:10.846Z,1513206850.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:11.195Z,1513206851.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:11.322Z,1513206851.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:11.599Z,1513206851.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:11.742Z,1513206851.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:12.077Z,1513206852.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:12.412Z,1513206852.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:12.537Z,1513206852.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:12.817Z,1513206852.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:13.209Z,1513206853.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:13.334Z,1513206853.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:13.595Z,1513206853.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:13.737Z,1513206853.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:13.990Z,1513206853.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:14.378Z,1513206854.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:14.536Z,1513206854.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:14.797Z,1513206854.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:15.284Z,1513206855.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:15.335Z,1513206855.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:15.583Z,1513206855.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:15.738Z,1513206855.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:16.007Z,1513206856.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:16.399Z,1513206856.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:16.534Z,1513206856.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:16.859Z,1513206856.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:17.221Z,1513206857.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:17.330Z,1513206857.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:17.630Z,1513206857.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:17.734Z,1513206857.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:18.038Z,1513206858.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:18.393Z,1513206858.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:18.529Z,1513206858.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:18.786Z,1513206858.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:19.203Z,1513206859.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:19.326Z,1513206859.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:19.611Z,1513206859.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:19.729Z,1513206859.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:19.999Z,1513206859.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:20.431Z,1513206860.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:20.525Z,1513206860.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:20.898Z,1513206860.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:21.205Z,1513206861.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:21.322Z,1513206861.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:21.635Z,1513206861.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:21.725Z,1513206861.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:22.071Z,1513206862.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:22.434Z,1513206862.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:22.522Z,1513206862.522 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:22.836Z,1513206862.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:23.231Z,1513206863.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:23.317Z,1513206863.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:23.604Z,1513206863.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:23.757Z,1513206863.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:24.050Z,1513206864.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:24.404Z,1513206864.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:24.554Z,1513206864.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:24.795Z,1513206864.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:25.334Z,1513206865.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:25.350Z,1513206865.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:25.614Z,1513206865.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:25.802Z,1513206865.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:26.009Z,1513206866.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:26.407Z,1513206866.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:26.597Z,1513206866.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:26.822Z,1513206866.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:27.191Z,1513206867.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:27.394Z,1513206867.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:27.592Z,1513206867.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:28.040Z,1513206868.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:28.190Z,1513206868.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:28.394Z,1513206868.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:28.834Z,1513206868.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:28.985Z,1513206868.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:29.247Z,1513206869.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:29.421Z,1513206869.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:29.604Z,1513206869.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:30.005Z,1513206870.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:30.217Z,1513206870.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:30.450Z,1513206870.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:30.807Z,1513206870.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:31.013Z,1513206871.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:31.202Z,1513206871.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:31.418Z,1513206871.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:31.616Z,1513206871.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:32.012Z,1513206872.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:32.214Z,1513206872.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:32.455Z,1513206872.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:32.854Z,1513206872.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:33.010Z,1513206873.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:33.192Z,1513206873.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:33.414Z,1513206873.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:33.595Z,1513206873.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:33.992Z,1513206873.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:34.212Z,1513206874.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:34.436Z,1513206874.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:34.806Z,1513206874.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:35.010Z,1513206875.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:35.215Z,1513206875.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:35.446Z,1513206875.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:35.620Z,1513206875.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:36.023Z,1513206876.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:36.241Z,1513206876.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:36.391Z,1513206876.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:36.786Z,1513206876.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:37.038Z,1513206877.038 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:37.220Z,1513206877.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:37.606Z,1513206877.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:37.753Z,1513206877.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:38.027Z,1513206878.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:38.549Z,1513206878.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:39.345Z,1513206879.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:39.750Z,1513206879.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:40.545Z,1513206880.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:41.342Z,1513206881.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:41.745Z,1513206881.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:42.541Z,1513206882.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:43.338Z,1513206883.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:43.741Z,1513206883.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:44.537Z,1513206884.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:45.335Z,1513206885.335 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:45.507Z,1513206885.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:45.697Z,1513206885.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:45.742Z,1513206885.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:46.096Z,1513206886.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:46.494Z,1513206886.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:46.537Z,1513206886.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:46.958Z,1513206886.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:47.289Z,1513206887.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:47.334Z,1513206887.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:47.648Z,1513206887.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:47.738Z,1513206887.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:48.044Z,1513206888.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:48.455Z,1513206888.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:48.534Z,1513206888.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:48.852Z,1513206888.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:49.256Z,1513206889.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:49.330Z,1513206889.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:49.664Z,1513206889.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:49.734Z,1513206889.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:50.076Z,1513206890.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:50.456Z,1513206890.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:50.530Z,1513206890.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:50.877Z,1513206890.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:51.325Z,1513206891.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:51.355Z,1513206891.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:51.642Z,1513206891.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:51.769Z,1513206891.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:52.060Z,1513206892.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:52.472Z,1513206892.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:52.565Z,1513206892.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:52.866Z,1513206892.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:53.307Z,1513206893.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:53.362Z,1513206893.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:53.647Z,1513206893.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:53.782Z,1513206893.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:54.053Z,1513206894.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:54.483Z,1513206894.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:54.577Z,1513206894.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:54.867Z,1513206894.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:55.258Z,1513206895.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:55.374Z,1513206895.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:55.752Z,1513206895.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:55.777Z,1513206895.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:56.068Z,1513206896.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:56.444Z,1513206896.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:56.574Z,1513206896.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:56.886Z,1513206896.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:57.252Z,1513206897.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:57.370Z,1513206897.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:57.655Z,1513206897.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:57.774Z,1513206897.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:58.119Z,1513206898.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:58.448Z,1513206898.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:58.570Z,1513206898.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:58.845Z,1513206898.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:59.250Z,1513206899.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:59.366Z,1513206899.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:14:59.648Z,1513206899.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:14:59.769Z,1513206899.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:00.069Z,1513206900.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:00.471Z,1513206900.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:00.565Z,1513206900.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:00.850Z,1513206900.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:01.267Z,1513206901.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:01.362Z,1513206901.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:01.671Z,1513206901.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:01.765Z,1513206901.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:02.081Z,1513206902.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:02.453Z,1513206902.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:02.562Z,1513206902.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:02.847Z,1513206902.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:03.255Z,1513206903.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:03.357Z,1513206903.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:03.664Z,1513206903.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:03.761Z,1513206903.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:04.039Z,1513206904.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:04.451Z,1513206904.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:04.557Z,1513206904.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:04.847Z,1513206904.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:05.324Z,1513206905.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:05.353Z,1513206905.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:05.645Z,1513206905.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:05.757Z,1513206905.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:06.051Z,1513206906.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:06.482Z,1513206906.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:06.553Z,1513206906.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:06.851Z,1513206906.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:07.336Z,1513206907.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:07.350Z,1513206907.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:07.720Z,1513206907.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:07.770Z,1513206907.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:08.091Z,1513206908.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:08.469Z,1513206908.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:08.566Z,1513206908.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:08.850Z,1513206908.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:09.283Z,1513206909.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:09.361Z,1513206909.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:09.656Z,1513206909.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:09.766Z,1513206909.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:10.096Z,1513206910.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:10.459Z,1513206910.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:10.562Z,1513206910.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:10.860Z,1513206910.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:11.270Z,1513206911.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:11.358Z,1513206911.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:11.699Z,1513206911.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:11.761Z,1513206911.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:12.052Z,1513206912.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:12.435Z,1513206912.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:12.558Z,1513206912.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:12.848Z,1513206912.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:13.291Z,1513206913.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:13.353Z,1513206913.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:13.663Z,1513206913.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:13.757Z,1513206913.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:14.040Z,1513206914.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:14.440Z,1513206914.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:14.554Z,1513206914.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:14.843Z,1513206914.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:15.311Z,1513206915.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:15.354Z,1513206915.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:15.665Z,1513206915.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:15.758Z,1513206915.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:16.051Z,1513206916.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:16.498Z,1513206916.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:16.553Z,1513206916.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:16.859Z,1513206916.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:17.264Z,1513206917.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:17.350Z,1513206917.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:17.690Z,1513206917.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:17.753Z,1513206917.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:18.060Z,1513206918.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:18.472Z,1513206918.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:18.549Z,1513206918.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:18.899Z,1513206918.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:19.345Z,1513206919.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:19.398Z,1513206919.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:19.679Z,1513206919.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:19.842Z,1513206919.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:20.065Z,1513206920.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:20.468Z,1513206920.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:20.638Z,1513206920.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:20.863Z,1513206920.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:21.309Z,1513206921.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:21.434Z,1513206921.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:21.634Z,1513206921.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:21.837Z,1513206921.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:22.071Z,1513206922.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:22.464Z,1513206922.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:22.634Z,1513206922.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:22.866Z,1513206922.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:23.282Z,1513206923.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:23.426Z,1513206923.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:23.682Z,1513206923.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:24.052Z,1513206924.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:24.222Z,1513206924.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:24.485Z,1513206924.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:24.836Z,1513206924.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:25.017Z,1513206925.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:25.258Z,1513206925.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:25.421Z,1513206925.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:25.668Z,1513206925.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:26.067Z,1513206926.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:26.217Z,1513206926.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:26.471Z,1513206926.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:26.861Z,1513206926.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:27.014Z,1513206927.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:27.269Z,1513206927.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:27.418Z,1513206927.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:27.653Z,1513206927.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:28.066Z,1513206928.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:28.213Z,1513206928.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:28.486Z,1513206928.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:28.888Z,1513206928.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:29.010Z,1513206929.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:29.256Z,1513206929.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:29.426Z,1513206929.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:29.667Z,1513206929.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:30.102Z,1513206930.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:30.221Z,1513206930.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:30.467Z,1513206930.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:30.839Z,1513206930.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:31.018Z,1513206931.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:31.259Z,1513206931.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:31.462Z,1513206931.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:31.699Z,1513206931.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:32.065Z,1513206932.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:32.258Z,1513206932.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:32.464Z,1513206932.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:32.864Z,1513206932.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:33.054Z,1513206933.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:33.299Z,1513206933.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:33.676Z,1513206933.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:33.753Z,1513206933.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:34.072Z,1513206934.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:34.482Z,1513206934.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:34.550Z,1513206934.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:34.870Z,1513206934.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:35.325Z,1513206935.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:35.345Z,1513206935.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:35.686Z,1513206935.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:35.754Z,1513206935.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:36.146Z,1513206936.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:36.504Z,1513206936.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:36.549Z,1513206936.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:36.880Z,1513206936.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:37.263Z,1513206937.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:37.346Z,1513206937.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:37.663Z,1513206937.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:37.750Z,1513206937.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:38.074Z,1513206938.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:38.546Z,1513206938.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:39.342Z,1513206939.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:39.745Z,1513206939.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:40.542Z,1513206940.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:41.341Z,1513206941.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:41.745Z,1513206941.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:42.541Z,1513206942.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:43.338Z,1513206943.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:43.741Z,1513206943.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:44.538Z,1513206944.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:45.334Z,1513206945.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:45.451Z,1513206945.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:45.621Z,1513206945.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:45.738Z,1513206945.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:45.996Z,1513206945.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:46.406Z,1513206946.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:46.534Z,1513206946.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:46.778Z,1513206946.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:47.223Z,1513206947.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:47.329Z,1513206947.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:47.584Z,1513206947.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:47.758Z,1513206947.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:47.991Z,1513206947.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:48.393Z,1513206948.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:48.553Z,1513206948.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:48.810Z,1513206948.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:49.218Z,1513206949.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:49.349Z,1513206949.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:49.646Z,1513206949.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:49.757Z,1513206949.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:49.973Z,1513206949.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:50.406Z,1513206950.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:50.554Z,1513206950.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:50.806Z,1513206950.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:51.203Z,1513206951.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:51.350Z,1513206951.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:51.609Z,1513206951.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:51.754Z,1513206951.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:52.003Z,1513206952.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:52.402Z,1513206952.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:52.550Z,1513206952.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:52.797Z,1513206952.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:53.196Z,1513206953.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:53.346Z,1513206953.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:53.591Z,1513206953.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:53.750Z,1513206953.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:53.994Z,1513206953.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:54.431Z,1513206954.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:54.546Z,1513206954.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:54.787Z,1513206954.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:55.197Z,1513206955.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:55.342Z,1513206955.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:55.610Z,1513206955.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:55.745Z,1513206955.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:55.988Z,1513206955.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:56.406Z,1513206956.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:56.541Z,1513206956.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:56.790Z,1513206956.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:57.176Z,1513206957.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:57.337Z,1513206957.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:57.691Z,1513206957.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:57.741Z,1513206957.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:58.001Z,1513206958.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:58.383Z,1513206958.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:58.538Z,1513206958.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:58.825Z,1513206958.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:59.222Z,1513206959.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:59.336Z,1513206959.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:59.654Z,1513206959.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:15:59.742Z,1513206959.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:15:59.999Z,1513206959.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:00.390Z,1513206960.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:00.537Z,1513206960.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:00.796Z,1513206960.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:01.202Z,1513206961.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:01.334Z,1513206961.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:01.574Z,1513206961.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:01.769Z,1513206961.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:01.992Z,1513206961.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:02.416Z,1513206962.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:02.566Z,1513206962.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:02.795Z,1513206962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:03.187Z,1513206963.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:03.362Z,1513206963.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:03.612Z,1513206963.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:03.785Z,1513206963.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:03.988Z,1513206963.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:04.424Z,1513206964.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:04.582Z,1513206964.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:04.827Z,1513206964.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:05.188Z,1513206965.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:05.378Z,1513206965.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:05.587Z,1513206965.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:05.782Z,1513206965.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:06.050Z,1513206966.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:06.388Z,1513206966.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:06.578Z,1513206966.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:06.800Z,1513206966.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:07.207Z,1513206967.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:07.374Z,1513206967.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:07.655Z,1513206967.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:07.777Z,1513206967.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:07.996Z,1513206967.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:08.414Z,1513206968.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:08.576Z,1513206968.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:08.791Z,1513206968.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:09.171Z,1513206969.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:09.370Z,1513206969.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:09.567Z,1513206969.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:10.018Z,1513206970.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:10.165Z,1513206970.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:10.410Z,1513206970.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:10.791Z,1513206970.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:10.962Z,1513206970.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:11.190Z,1513206971.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:11.397Z,1513206971.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:11.583Z,1513206971.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:12.037Z,1513206972.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:12.193Z,1513206972.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:12.392Z,1513206972.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:12.795Z,1513206972.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:13.007Z,1513206973.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:13.237Z,1513206973.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:13.481Z,1513206973.481 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:13.595Z,1513206973.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:13.971Z,1513206973.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:14.278Z,1513206974.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:14.374Z,1513206974.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:14.816Z,1513206974.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:15.073Z,1513206975.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:15.204Z,1513206975.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:15.588Z,1513206975.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:15.734Z,1513206975.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:16.030Z,1513206976.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:16.441Z,1513206976.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:16.530Z,1513206976.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:16.787Z,1513206976.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:17.184Z,1513206977.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:17.326Z,1513206977.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:17.567Z,1513206977.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:17.750Z,1513206977.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:18.012Z,1513206978.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:18.408Z,1513206978.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:18.545Z,1513206978.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:18.798Z,1513206978.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:19.224Z,1513206979.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:19.342Z,1513206979.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:19.659Z,1513206979.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:19.746Z,1513206979.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:20.001Z,1513206980.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:20.415Z,1513206980.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:20.541Z,1513206980.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:20.823Z,1513206980.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:21.211Z,1513206981.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:21.338Z,1513206981.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:21.596Z,1513206981.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:21.741Z,1513206981.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:22.015Z,1513206982.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:22.406Z,1513206982.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:22.539Z,1513206982.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:22.808Z,1513206982.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:23.202Z,1513206983.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:23.334Z,1513206983.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:23.613Z,1513206983.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:23.738Z,1513206983.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:23.981Z,1513206983.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:24.387Z,1513206984.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:24.534Z,1513206984.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:24.791Z,1513206984.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:25.191Z,1513206985.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:25.329Z,1513206985.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:25.640Z,1513206985.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:25.734Z,1513206985.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:25.990Z,1513206985.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:26.422Z,1513206986.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:26.530Z,1513206986.530 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:26.791Z,1513206986.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:27.185Z,1513206987.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:27.326Z,1513206987.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:27.587Z,1513206987.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:27.729Z,1513206987.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:28.032Z,1513206988.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:28.384Z,1513206988.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:28.525Z,1513206988.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:28.783Z,1513206988.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:29.179Z,1513206989.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:29.322Z,1513206989.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:29.627Z,1513206989.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:29.750Z,1513206989.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:30.048Z,1513206990.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:30.413Z,1513206990.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:30.545Z,1513206990.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:30.783Z,1513206990.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:31.222Z,1513206991.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:31.342Z,1513206991.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:31.631Z,1513206991.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:31.757Z,1513206991.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:31.991Z,1513206991.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:32.410Z,1513206992.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:32.554Z,1513206992.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:32.808Z,1513206992.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:33.213Z,1513206993.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:33.350Z,1513206993.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:33.610Z,1513206993.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:33.754Z,1513206993.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:34.010Z,1513206994.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:34.443Z,1513206994.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:34.550Z,1513206994.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:34.840Z,1513206994.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:35.230Z,1513206995.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:35.347Z,1513206995.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:35.623Z,1513206995.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:35.753Z,1513206995.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:35.992Z,1513206995.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:36.431Z,1513206996.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:36.549Z,1513206996.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:36.788Z,1513206996.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:37.199Z,1513206997.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:37.346Z,1513206997.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:37.595Z,1513206997.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:37.750Z,1513206997.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:37.987Z,1513206997.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:38.385Z,1513206998.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:38.546Z,1513206998.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:39.342Z,1513206999.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:39.745Z,1513206999.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:40.541Z,1513207000.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:41.338Z,1513207001.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:41.741Z,1513207001.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:42.538Z,1513207002.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:43.334Z,1513207003.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:43.781Z,1513207003.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:44.578Z,1513207004.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:45.088Z,1513207005.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:45.300Z,1513207005.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:45.373Z,1513207005.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:45.652Z,1513207005.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:45.778Z,1513207005.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:46.058Z,1513207006.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:46.495Z,1513207006.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:46.574Z,1513207006.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:46.808Z,1513207006.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:47.254Z,1513207007.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:47.369Z,1513207007.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:47.619Z,1513207007.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:47.774Z,1513207007.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:48.019Z,1513207008.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:48.460Z,1513207008.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:48.569Z,1513207008.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:48.817Z,1513207008.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:49.245Z,1513207009.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:49.365Z,1513207009.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:49.658Z,1513207009.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:49.769Z,1513207009.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:50.042Z,1513207010.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:50.407Z,1513207010.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:50.565Z,1513207010.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:50.808Z,1513207010.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:50.808Z,1513207010.808 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2017-12-13T23:16:50.808Z,1513207010.808 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:16:50.820Z,1513207010.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:50.820Z,1513207010.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2017-12-13T23:16:50.820Z,1513207010.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:16:50.853Z,1513207010.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:50.853Z,1513207010.853 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-12-13T23:16:50.853Z,1513207010.853 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:16:50.944Z,1513207010.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:16:50.973Z,1513207010.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:16:50.973Z,1513207010.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:16:51.281Z,1513207011.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:16:51.281Z,1513207011.281 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2017-12-13T23:16:51.282Z,1513207011.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:16:51.282Z,1513207011.282 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2017-12-13T23:16:51.282Z,1513207011.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:16:51.282Z,1513207011.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-12-13T23:16:51.362Z,1513207011.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:51.643Z,1513207011.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:16:51.644Z,1513207011.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:16:51.644Z,1513207011.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:16:51.665Z,1513207011.665 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:16:51.665Z,1513207011.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:16:51.665Z,1513207011.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:16:51.666Z,1513207011.666 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:16:51.666Z,1513207011.666 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:16:51.667Z,1513207011.667 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:16:51.766Z,1513207011.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:52.055Z,1513207012.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:52.403Z,1513207012.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:52.564Z,1513207012.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:52.866Z,1513207012.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:53.246Z,1513207013.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:53.361Z,1513207013.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:53.619Z,1513207013.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:53.766Z,1513207013.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:54.019Z,1513207014.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:54.471Z,1513207014.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:54.562Z,1513207014.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:54.824Z,1513207014.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:55.224Z,1513207015.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:55.358Z,1513207015.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:55.659Z,1513207015.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:55.762Z,1513207015.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:56.062Z,1513207016.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:56.431Z,1513207016.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:56.558Z,1513207016.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:56.822Z,1513207016.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:57.225Z,1513207017.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:57.354Z,1513207017.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:57.616Z,1513207017.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:57.762Z,1513207017.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:58.026Z,1513207018.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:58.407Z,1513207018.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:58.558Z,1513207018.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:58.822Z,1513207018.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:59.226Z,1513207019.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:59.354Z,1513207019.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:16:59.634Z,1513207019.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:16:59.776Z,1513207019.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:00.014Z,1513207020.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:00.431Z,1513207020.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:00.569Z,1513207020.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:00.817Z,1513207020.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:01.227Z,1513207021.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:01.366Z,1513207021.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:01.668Z,1513207021.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:01.769Z,1513207021.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:01.999Z,1513207021.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:02.403Z,1513207022.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:02.567Z,1513207022.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:02.800Z,1513207022.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:03.237Z,1513207023.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:03.362Z,1513207023.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:03.615Z,1513207023.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:03.766Z,1513207023.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:04.067Z,1513207024.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:04.411Z,1513207024.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:04.562Z,1513207024.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:04.822Z,1513207024.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:05.223Z,1513207025.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:05.358Z,1513207025.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:05.615Z,1513207025.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:05.762Z,1513207025.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:06.111Z,1513207026.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:06.458Z,1513207026.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:06.557Z,1513207026.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:06.815Z,1513207026.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:07.244Z,1513207027.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:07.354Z,1513207027.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:07.643Z,1513207027.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:07.757Z,1513207027.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:08.067Z,1513207028.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:08.412Z,1513207028.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:08.553Z,1513207028.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:08.820Z,1513207028.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:09.223Z,1513207029.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:09.350Z,1513207029.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:09.678Z,1513207029.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:09.753Z,1513207029.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:10.041Z,1513207030.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:10.412Z,1513207030.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:10.550Z,1513207030.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:10.820Z,1513207030.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:11.274Z,1513207031.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:11.346Z,1513207031.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:11.625Z,1513207031.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:11.754Z,1513207031.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:12.003Z,1513207032.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:12.441Z,1513207032.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:12.550Z,1513207032.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:12.863Z,1513207032.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:13.200Z,1513207033.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:13.345Z,1513207033.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:13.647Z,1513207033.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:13.749Z,1513207033.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:14.018Z,1513207034.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:14.407Z,1513207034.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:14.545Z,1513207034.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:14.803Z,1513207034.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:15.211Z,1513207035.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:15.344Z,1513207035.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:15.619Z,1513207035.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:15.858Z,1513207035.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:16.031Z,1513207036.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:16.422Z,1513207036.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:16.654Z,1513207036.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:16.810Z,1513207036.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:17.233Z,1513207037.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:17.393Z,1513207037.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:17.631Z,1513207037.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:18.051Z,1513207038.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:18.190Z,1513207038.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:18.411Z,1513207038.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:18.812Z,1513207038.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:18.986Z,1513207038.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:19.223Z,1513207039.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:19.392Z,1513207039.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:19.670Z,1513207039.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:20.021Z,1513207040.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:20.185Z,1513207040.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:20.399Z,1513207040.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:20.799Z,1513207040.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:20.981Z,1513207040.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:21.227Z,1513207041.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:21.454Z,1513207041.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:21.627Z,1513207041.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:22.027Z,1513207042.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:22.250Z,1513207042.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:22.431Z,1513207042.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:22.824Z,1513207042.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:23.046Z,1513207043.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:23.229Z,1513207043.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:23.453Z,1513207043.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:23.628Z,1513207043.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:24.012Z,1513207044.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:24.249Z,1513207044.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:24.450Z,1513207044.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:24.820Z,1513207044.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:25.046Z,1513207045.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:25.207Z,1513207045.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:25.624Z,1513207045.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:25.737Z,1513207045.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:26.024Z,1513207046.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:26.431Z,1513207046.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:26.534Z,1513207046.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:26.836Z,1513207046.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:27.330Z,1513207047.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:27.378Z,1513207047.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:27.635Z,1513207047.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:27.751Z,1513207047.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:28.027Z,1513207048.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:28.428Z,1513207048.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:28.547Z,1513207048.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:28.957Z,1513207048.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:29.245Z,1513207049.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:29.342Z,1513207049.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:29.667Z,1513207049.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:29.746Z,1513207049.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:30.023Z,1513207050.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:30.415Z,1513207050.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:30.541Z,1513207050.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:30.844Z,1513207050.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:31.211Z,1513207051.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:31.338Z,1513207051.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:31.649Z,1513207051.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:31.741Z,1513207051.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:32.034Z,1513207052.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:32.437Z,1513207052.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:32.538Z,1513207052.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:32.852Z,1513207052.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:33.211Z,1513207053.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:33.334Z,1513207053.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:33.642Z,1513207053.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:33.738Z,1513207053.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:34.034Z,1513207054.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:34.414Z,1513207054.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:34.534Z,1513207054.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:34.819Z,1513207054.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:35.216Z,1513207055.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:35.331Z,1513207055.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:35.612Z,1513207055.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:35.746Z,1513207055.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:36.034Z,1513207056.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:36.456Z,1513207056.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:36.543Z,1513207056.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:36.814Z,1513207056.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:37.223Z,1513207057.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:37.338Z,1513207057.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:37.667Z,1513207057.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:37.742Z,1513207057.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:38.015Z,1513207058.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:38.434Z,1513207058.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:38.538Z,1513207058.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:39.334Z,1513207059.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:39.757Z,1513207059.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:40.553Z,1513207060.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:41.350Z,1513207061.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:41.753Z,1513207061.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:42.549Z,1513207062.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:43.346Z,1513207063.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:43.749Z,1513207063.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:44.546Z,1513207064.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:44.803Z,1513207064.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:45.039Z,1513207065.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:45.323Z,1513207065.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:45.342Z,1513207065.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:45.745Z,1513207065.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:45.758Z,1513207065.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:46.180Z,1513207066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:46.520Z,1513207066.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:46.545Z,1513207066.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:46.995Z,1513207066.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:47.335Z,1513207067.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:47.341Z,1513207067.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:47.736Z,1513207067.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:47.745Z,1513207067.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:48.110Z,1513207068.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:48.542Z,1513207068.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:48.547Z,1513207068.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:49.010Z,1513207069.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:49.337Z,1513207069.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:49.395Z,1513207069.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:49.741Z,1513207069.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:49.744Z,1513207069.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:50.136Z,1513207070.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:50.536Z,1513207070.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:50.537Z,1513207070.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:51.006Z,1513207071.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:51.342Z,1513207071.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:51.376Z,1513207071.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:51.735Z,1513207071.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:51.745Z,1513207071.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:52.122Z,1513207072.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:52.536Z,1513207072.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:52.542Z,1513207072.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:52.965Z,1513207072.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:53.338Z,1513207073.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:53.380Z,1513207073.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:53.729Z,1513207073.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:53.777Z,1513207073.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:54.136Z,1513207074.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:54.538Z,1513207074.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:54.573Z,1513207074.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:54.935Z,1513207074.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:55.369Z,1513207075.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:55.382Z,1513207075.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:55.745Z,1513207075.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:55.789Z,1513207075.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:56.175Z,1513207076.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:56.585Z,1513207076.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:56.588Z,1513207076.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:57.008Z,1513207077.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:57.322Z,1513207077.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:57.389Z,1513207077.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:57.762Z,1513207077.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:57.793Z,1513207077.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:58.122Z,1513207078.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:58.561Z,1513207078.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:58.605Z,1513207078.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:59.042Z,1513207079.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:59.382Z,1513207079.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:59.402Z,1513207079.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:17:59.753Z,1513207079.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:17:59.805Z,1513207079.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:00.128Z,1513207080.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:00.531Z,1513207080.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:00.602Z,1513207080.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:00.988Z,1513207080.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:01.331Z,1513207081.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:01.398Z,1513207081.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:01.772Z,1513207081.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:01.802Z,1513207081.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:02.128Z,1513207082.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:02.551Z,1513207082.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:02.597Z,1513207082.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:03.000Z,1513207083.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:03.336Z,1513207083.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:03.393Z,1513207083.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:03.779Z,1513207083.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:03.797Z,1513207083.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:04.159Z,1513207084.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:04.542Z,1513207084.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:04.595Z,1513207084.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:05.016Z,1513207085.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:05.339Z,1513207085.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:05.389Z,1513207085.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:05.758Z,1513207085.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:05.793Z,1513207085.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:06.135Z,1513207086.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:06.539Z,1513207086.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:06.597Z,1513207086.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:06.939Z,1513207086.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:07.376Z,1513207087.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:07.393Z,1513207087.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:07.737Z,1513207087.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:07.798Z,1513207087.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:08.161Z,1513207088.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:08.558Z,1513207088.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:08.601Z,1513207088.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:08.918Z,1513207088.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:09.385Z,1513207089.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:09.414Z,1513207089.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:09.761Z,1513207089.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:09.817Z,1513207089.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:10.152Z,1513207090.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:10.547Z,1513207090.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:10.613Z,1513207090.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:11.025Z,1513207091.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:11.353Z,1513207091.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:11.410Z,1513207091.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:11.735Z,1513207091.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:11.813Z,1513207091.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:12.158Z,1513207092.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:12.574Z,1513207092.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:12.610Z,1513207092.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:13.003Z,1513207093.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:13.335Z,1513207093.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:13.393Z,1513207093.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:13.739Z,1513207093.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:14.136Z,1513207094.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:14.190Z,1513207094.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:14.559Z,1513207094.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:14.986Z,1513207094.986 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:14.994Z,1513207094.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:15.347Z,1513207095.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:15.426Z,1513207095.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:15.747Z,1513207095.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:16.127Z,1513207096.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:16.222Z,1513207096.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:16.540Z,1513207096.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:17.006Z,1513207097.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:17.019Z,1513207097.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:17.326Z,1513207097.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:17.439Z,1513207097.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:17.783Z,1513207097.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:18.137Z,1513207098.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:18.233Z,1513207098.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:18.536Z,1513207098.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:18.970Z,1513207098.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:19.029Z,1513207099.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:19.355Z,1513207099.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:19.454Z,1513207099.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:19.735Z,1513207099.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:20.190Z,1513207100.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:20.250Z,1513207100.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:20.524Z,1513207100.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:20.974Z,1513207100.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:21.046Z,1513207101.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:21.378Z,1513207101.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:21.749Z,1513207101.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:21.777Z,1513207101.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:22.136Z,1513207102.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:22.563Z,1513207102.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:22.574Z,1513207102.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:22.959Z,1513207102.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:23.370Z,1513207103.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:23.425Z,1513207103.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:23.713Z,1513207103.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:23.857Z,1513207103.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:24.116Z,1513207104.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:24.518Z,1513207104.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:24.653Z,1513207104.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:24.970Z,1513207104.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:25.339Z,1513207105.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:25.418Z,1513207105.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:25.760Z,1513207105.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:26.124Z,1513207106.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:26.214Z,1513207106.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:26.523Z,1513207106.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:27.009Z,1513207107.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:27.026Z,1513207107.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:27.343Z,1513207107.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:27.413Z,1513207107.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:27.735Z,1513207107.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:28.143Z,1513207108.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:28.210Z,1513207108.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:28.540Z,1513207108.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:29.010Z,1513207109.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:29.015Z,1513207109.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:29.374Z,1513207109.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:29.413Z,1513207109.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:29.719Z,1513207109.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:30.116Z,1513207110.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:30.209Z,1513207110.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:30.517Z,1513207110.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:30.993Z,1513207110.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:31.005Z,1513207111.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:31.342Z,1513207111.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:31.413Z,1513207111.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:31.723Z,1513207111.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:32.157Z,1513207112.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:32.209Z,1513207112.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:32.518Z,1513207112.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:32.936Z,1513207112.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:33.006Z,1513207113.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:33.360Z,1513207113.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:33.466Z,1513207113.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:33.728Z,1513207113.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:34.159Z,1513207114.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:34.262Z,1513207114.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:34.530Z,1513207114.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:34.921Z,1513207114.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:35.057Z,1513207115.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:35.398Z,1513207115.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:35.777Z,1513207115.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:35.786Z,1513207115.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:36.153Z,1513207116.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:36.549Z,1513207116.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:36.574Z,1513207116.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:36.956Z,1513207116.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:36.964Z,1513207116.964 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-13T23:13:36.0Z
2017-12-13T23:18:36.969Z,1513207116.969 [Default:CheckIn:Read_GPS] Stopped
2017-12-13T23:18:36.969Z,1513207116.969 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-13T23:18:37.369Z,1513207117.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:37.376Z,1513207117.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:37.790Z,1513207117.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:38.585Z,1513207118.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:39.029Z,1513207119.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:39.233Z,1513207119.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:39.382Z,1513207119.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:39.786Z,1513207119.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:40.581Z,1513207120.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:41.377Z,1513207121.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:42.197Z,1513207122.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:42.994Z,1513207122.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:43.398Z,1513207123.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:44.193Z,1513207124.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:44.990Z,1513207124.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:45.393Z,1513207125.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:46.049Z,1513207126.049 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:18:46.049Z,1513207126.049 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:18:46.049Z,1513207126.049 [BPC1](ERROR): Communications Fault
2017-12-13T23:18:46.099Z,1513207126.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:46.136Z,1513207126.136 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:18:46.136Z,1513207126.136 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-13T23:18:46.162Z,1513207126.162 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171213T225830/Courier0008.lzma
2017-12-13T23:18:46.189Z,1513207126.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:46.254Z,1513207126.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:46.634Z,1513207126.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:46.987Z,1513207126.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:46.996Z,1513207126.996 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Courier0008.lzma.bak
2017-12-13T23:18:46.996Z,1513207126.996 [DataOverHttps](INFO): SBD MOMSN=5436911
2017-12-13T23:18:47.112Z,1513207127.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:47.170Z,1513207127.170 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:18:47.170Z,1513207127.170 [BPC1] No Fault, FailCount= 1
2017-12-13T23:18:47.456Z,1513207127.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:48.250Z,1513207128.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:49.045Z,1513207129.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:49.221Z,1513207129.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:49.454Z,1513207129.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:49.793Z,1513207129.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:50.590Z,1513207130.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:51.385Z,1513207131.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:51.790Z,1513207131.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:52.585Z,1513207132.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:53.382Z,1513207133.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:53.785Z,1513207133.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:54.581Z,1513207134.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:55.380Z,1513207135.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:55.785Z,1513207135.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:56.581Z,1513207136.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:56.771Z,1513207136.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:57.006Z,1513207137.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:57.315Z,1513207137.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:57.378Z,1513207137.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:57.720Z,1513207137.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:57.781Z,1513207137.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:58.105Z,1513207138.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:58.486Z,1513207138.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:18:58.578Z,1513207138.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:59.374Z,1513207139.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:18:59.778Z,1513207139.778 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:00.573Z,1513207140.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:01.370Z,1513207141.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:01.773Z,1513207141.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:02.569Z,1513207142.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:03.366Z,1513207143.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:03.769Z,1513207143.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:04.316Z,1513207144.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:04.401Z,1513207144.401 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20171213T225830/Express0009.lzma
2017-12-13T23:19:04.456Z,1513207144.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:04.565Z,1513207144.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:04.832Z,1513207144.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:05.175Z,1513207145.175 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Express0009.lzma.bak
2017-12-13T23:19:05.175Z,1513207145.175 [DataOverHttps](INFO): SBD MOMSN=5436913
2017-12-13T23:19:05.362Z,1513207145.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:05.399Z,1513207145.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:05.765Z,1513207145.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:06.561Z,1513207146.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:07.358Z,1513207147.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:07.761Z,1513207147.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:08.557Z,1513207148.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:09.354Z,1513207149.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:09.757Z,1513207149.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:10.553Z,1513207150.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:11.349Z,1513207151.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:11.753Z,1513207151.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:12.549Z,1513207152.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:13.345Z,1513207153.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:13.749Z,1513207153.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:14.545Z,1513207154.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:15.341Z,1513207155.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:15.745Z,1513207155.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:16.541Z,1513207156.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:17.337Z,1513207157.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:17.741Z,1513207157.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:18.537Z,1513207158.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:19.334Z,1513207159.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:19.737Z,1513207159.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:20.534Z,1513207160.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:21.334Z,1513207161.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:21.737Z,1513207161.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:22.534Z,1513207162.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:23.329Z,1513207163.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:23.734Z,1513207163.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:24.529Z,1513207164.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:25.325Z,1513207165.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:25.729Z,1513207165.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:26.525Z,1513207166.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:27.321Z,1513207167.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:27.725Z,1513207167.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:28.521Z,1513207168.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:29.317Z,1513207169.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:29.721Z,1513207169.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:30.517Z,1513207170.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:30.887Z,1513207170.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:30.908Z,1513207170.908 [Default:CheckIn:Read_Iridium] Stopped
2017-12-13T23:19:30.908Z,1513207170.908 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-13T23:19:30.908Z,1513207170.908 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-13T23:19:31.031Z,1513207171.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:31.314Z,1513207171.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:31.717Z,1513207171.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:32.514Z,1513207172.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:33.309Z,1513207173.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:33.754Z,1513207173.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:34.549Z,1513207174.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:35.345Z,1513207175.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:35.749Z,1513207175.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:36.546Z,1513207176.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:37.342Z,1513207177.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:37.745Z,1513207177.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:37.882Z,1513207177.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:38.035Z,1513207178.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:38.411Z,1513207178.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:38.542Z,1513207178.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:38.795Z,1513207178.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:39.337Z,1513207179.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:39.346Z,1513207179.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:39.601Z,1513207179.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:39.741Z,1513207179.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:40.008Z,1513207180.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:40.399Z,1513207180.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:40.537Z,1513207180.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:40.822Z,1513207180.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:41.191Z,1513207181.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:41.334Z,1513207181.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:41.591Z,1513207181.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:42.007Z,1513207182.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:42.089Z,1513207182.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:42.431Z,1513207182.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:42.810Z,1513207182.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:42.886Z,1513207182.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:43.207Z,1513207183.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:43.434Z,1513207183.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:43.601Z,1513207183.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:44.019Z,1513207184.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:44.232Z,1513207184.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:44.461Z,1513207184.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:44.819Z,1513207184.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:45.026Z,1513207185.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:45.204Z,1513207185.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:45.623Z,1513207185.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:45.750Z,1513207185.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:46.041Z,1513207186.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:46.400Z,1513207186.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:46.545Z,1513207186.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:46.790Z,1513207186.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:47.198Z,1513207187.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:47.341Z,1513207187.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:47.608Z,1513207187.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:47.745Z,1513207187.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:48.032Z,1513207188.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:48.432Z,1513207188.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:48.541Z,1513207188.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:48.801Z,1513207188.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:49.207Z,1513207189.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:49.338Z,1513207189.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:49.603Z,1513207189.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:49.741Z,1513207189.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:50.061Z,1513207190.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:50.413Z,1513207190.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:50.537Z,1513207190.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:50.838Z,1513207190.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:51.204Z,1513207191.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:51.334Z,1513207191.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:51.599Z,1513207191.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:51.738Z,1513207191.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:52.004Z,1513207192.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:52.004Z,1513207192.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2017-12-13T23:19:52.004Z,1513207192.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:19:52.006Z,1513207192.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:52.006Z,1513207192.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2017-12-13T23:19:52.006Z,1513207192.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:19:52.008Z,1513207192.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:52.008Z,1513207192.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-12-13T23:19:52.008Z,1513207192.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:19:52.056Z,1513207192.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:19:52.057Z,1513207192.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:19:52.057Z,1513207192.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:19:52.443Z,1513207192.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:19:52.443Z,1513207192.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2017-12-13T23:19:52.443Z,1513207192.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:19:52.443Z,1513207192.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2017-12-13T23:19:52.444Z,1513207192.444 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:19:52.444Z,1513207192.444 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-12-13T23:19:52.534Z,1513207192.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:52.794Z,1513207192.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:19:52.795Z,1513207192.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:19:52.795Z,1513207192.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:19:52.795Z,1513207192.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:19:52.796Z,1513207192.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:19:52.796Z,1513207192.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:19:52.796Z,1513207192.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:19:52.797Z,1513207192.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:19:52.797Z,1513207192.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:19:53.280Z,1513207193.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:53.329Z,1513207193.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:53.636Z,1513207193.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:53.734Z,1513207193.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:54.016Z,1513207194.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:54.435Z,1513207194.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:54.529Z,1513207194.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:54.814Z,1513207194.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:55.208Z,1513207195.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:55.327Z,1513207195.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:55.624Z,1513207195.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:55.729Z,1513207195.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:56.019Z,1513207196.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:56.416Z,1513207196.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:56.525Z,1513207196.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:56.824Z,1513207196.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:57.271Z,1513207197.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:57.322Z,1513207197.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:57.600Z,1513207197.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:57.725Z,1513207197.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:57.991Z,1513207197.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:58.457Z,1513207198.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:58.521Z,1513207198.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:58.803Z,1513207198.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:59.295Z,1513207199.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:59.318Z,1513207199.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:19:59.624Z,1513207199.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:19:59.770Z,1513207199.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:00.042Z,1513207200.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:00.418Z,1513207200.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:00.565Z,1513207200.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:00.809Z,1513207200.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:01.212Z,1513207201.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:01.362Z,1513207201.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:01.611Z,1513207201.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:01.765Z,1513207201.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:02.022Z,1513207202.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:02.407Z,1513207202.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:02.561Z,1513207202.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:02.802Z,1513207202.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:03.194Z,1513207203.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:03.357Z,1513207203.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:03.631Z,1513207203.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:03.761Z,1513207203.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:04.015Z,1513207204.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:04.414Z,1513207204.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:04.557Z,1513207204.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:04.788Z,1513207204.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:05.212Z,1513207205.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:05.354Z,1513207205.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:05.640Z,1513207205.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:05.757Z,1513207205.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:05.997Z,1513207205.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:06.395Z,1513207206.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:06.554Z,1513207206.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:06.803Z,1513207206.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:07.198Z,1513207207.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:07.350Z,1513207207.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:07.599Z,1513207207.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:07.753Z,1513207207.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:08.012Z,1513207208.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:08.469Z,1513207208.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:08.549Z,1513207208.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:08.859Z,1513207208.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:09.183Z,1513207209.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:09.346Z,1513207209.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:09.610Z,1513207209.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:09.749Z,1513207209.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:10.008Z,1513207210.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:10.407Z,1513207210.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:10.545Z,1513207210.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:10.785Z,1513207210.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:11.146Z,1513207211.146 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-13T23:20:11.147Z,1513207211.147 [NAL9602] Data Fault, FailCount= 2
2017-12-13T23:20:11.147Z,1513207211.147 [NAL9602](ERROR): Data Fault
2017-12-13T23:20:11.200Z,1513207211.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:11.230Z,1513207211.230 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-13T23:20:11.341Z,1513207211.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:11.573Z,1513207211.573 [NAL9602](INFO): Powering down
2017-12-13T23:20:11.632Z,1513207211.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:11.745Z,1513207211.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:11.995Z,1513207211.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:12.389Z,1513207212.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:12.402Z,1513207212.402 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-13T23:20:12.402Z,1513207212.402 [NAL9602] No Fault, FailCount= 2
2017-12-13T23:20:12.541Z,1513207212.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:12.785Z,1513207212.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:13.186Z,1513207213.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:13.337Z,1513207213.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:13.590Z,1513207213.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:13.741Z,1513207213.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:13.987Z,1513207213.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:14.435Z,1513207214.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:14.537Z,1513207214.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:14.850Z,1513207214.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:15.292Z,1513207215.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:15.334Z,1513207215.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:15.590Z,1513207215.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:15.994Z,1513207215.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:16.129Z,1513207216.129 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:16.393Z,1513207216.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:16.790Z,1513207216.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:16.927Z,1513207216.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:17.203Z,1513207217.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:17.587Z,1513207217.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:17.721Z,1513207217.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:17.991Z,1513207217.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:18.394Z,1513207218.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:18.519Z,1513207218.519 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:18.808Z,1513207218.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:19.189Z,1513207219.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:19.313Z,1513207219.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:19.611Z,1513207219.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:19.987Z,1513207219.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:20.109Z,1513207220.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:20.429Z,1513207220.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:20.796Z,1513207220.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:20.909Z,1513207220.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:21.239Z,1513207221.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:21.426Z,1513207221.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:21.611Z,1513207221.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:21.831Z,1513207221.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:22.007Z,1513207222.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:22.233Z,1513207222.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:22.377Z,1513207222.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:22.637Z,1513207222.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:22.853Z,1513207222.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:23.186Z,1513207223.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:23.397Z,1513207223.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:23.590Z,1513207223.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:23.990Z,1513207223.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:24.193Z,1513207224.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:24.398Z,1513207224.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:24.831Z,1513207224.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:24.991Z,1513207224.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:25.198Z,1513207225.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:25.417Z,1513207225.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:25.589Z,1513207225.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:25.999Z,1513207225.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:26.213Z,1513207226.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:26.401Z,1513207226.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:26.779Z,1513207226.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:27.009Z,1513207227.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:27.301Z,1513207227.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:27.599Z,1513207227.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:27.753Z,1513207227.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:27.986Z,1513207227.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:28.447Z,1513207228.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:28.550Z,1513207228.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:28.846Z,1513207228.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:29.191Z,1513207229.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:29.345Z,1513207229.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:29.599Z,1513207229.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:29.761Z,1513207229.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:29.995Z,1513207229.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:30.409Z,1513207230.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:30.557Z,1513207230.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:30.790Z,1513207230.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:31.195Z,1513207231.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:31.353Z,1513207231.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:31.594Z,1513207231.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:31.757Z,1513207231.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:32.553Z,1513207232.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:33.349Z,1513207233.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:33.753Z,1513207233.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:34.550Z,1513207234.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:35.345Z,1513207235.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:35.749Z,1513207235.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:36.545Z,1513207236.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:36.758Z,1513207236.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:36.967Z,1513207236.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:37.303Z,1513207237.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:37.341Z,1513207237.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:37.714Z,1513207237.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:37.746Z,1513207237.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:38.133Z,1513207238.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:38.478Z,1513207238.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:38.541Z,1513207238.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:38.875Z,1513207238.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:39.326Z,1513207239.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:39.345Z,1513207239.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:39.712Z,1513207239.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:39.749Z,1513207239.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:40.112Z,1513207240.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:40.512Z,1513207240.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:40.545Z,1513207240.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:40.891Z,1513207240.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:41.341Z,1513207241.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:41.450Z,1513207241.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:41.659Z,1513207241.659 [NAL9602](INFO): Powering up NAL9602
2017-12-13T23:20:41.719Z,1513207241.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:41.745Z,1513207241.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:42.111Z,1513207242.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:42.528Z,1513207242.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:42.541Z,1513207242.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:42.917Z,1513207242.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:43.338Z,1513207243.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:43.367Z,1513207243.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:43.698Z,1513207243.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:43.777Z,1513207243.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:44.111Z,1513207244.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:44.486Z,1513207244.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:44.573Z,1513207244.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:44.871Z,1513207244.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:45.291Z,1513207245.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:45.369Z,1513207245.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:45.682Z,1513207245.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:45.773Z,1513207245.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:46.076Z,1513207246.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:46.486Z,1513207246.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:46.569Z,1513207246.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:46.881Z,1513207246.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:47.315Z,1513207247.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:47.365Z,1513207247.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:47.704Z,1513207247.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:47.769Z,1513207247.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:48.126Z,1513207248.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:48.483Z,1513207248.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:48.566Z,1513207248.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:48.887Z,1513207248.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:49.298Z,1513207249.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:49.361Z,1513207249.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:49.685Z,1513207249.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:49.765Z,1513207249.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:50.087Z,1513207250.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:50.480Z,1513207250.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:50.561Z,1513207250.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:50.878Z,1513207250.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:51.287Z,1513207251.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:51.358Z,1513207251.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:51.683Z,1513207251.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:51.761Z,1513207251.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:52.091Z,1513207252.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:52.548Z,1513207252.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:52.557Z,1513207252.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:52.838Z,1513207252.838 [NAL9602](INFO): NAL9602 initialized
2017-12-13T23:20:52.902Z,1513207252.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:53.280Z,1513207253.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:53.354Z,1513207253.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:53.704Z,1513207253.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:53.757Z,1513207253.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:54.134Z,1513207254.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:54.497Z,1513207254.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:54.553Z,1513207254.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:54.885Z,1513207254.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:55.349Z,1513207255.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:55.395Z,1513207255.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:55.710Z,1513207255.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:55.790Z,1513207255.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:56.114Z,1513207256.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:56.507Z,1513207256.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:56.585Z,1513207256.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:56.888Z,1513207256.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:57.370Z,1513207257.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:57.382Z,1513207257.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:57.719Z,1513207257.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:57.786Z,1513207257.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:58.090Z,1513207258.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:58.498Z,1513207258.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:58.582Z,1513207258.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:58.965Z,1513207258.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:59.311Z,1513207259.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:59.377Z,1513207259.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:20:59.704Z,1513207259.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:20:59.781Z,1513207259.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:00.153Z,1513207260.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:00.510Z,1513207260.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:00.578Z,1513207260.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:00.978Z,1513207260.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:01.308Z,1513207261.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:01.374Z,1513207261.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:01.707Z,1513207261.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:01.777Z,1513207261.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:02.111Z,1513207262.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:02.519Z,1513207262.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:02.573Z,1513207262.573 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:03.025Z,1513207263.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:03.331Z,1513207263.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:03.369Z,1513207263.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:03.714Z,1513207263.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:03.773Z,1513207263.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:04.083Z,1513207264.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:04.547Z,1513207264.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:04.569Z,1513207264.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:04.960Z,1513207264.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:05.314Z,1513207265.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:05.381Z,1513207265.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:05.735Z,1513207265.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:05.785Z,1513207265.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:06.147Z,1513207266.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:06.520Z,1513207266.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:06.582Z,1513207266.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:07.004Z,1513207267.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:07.310Z,1513207267.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:07.379Z,1513207267.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:07.702Z,1513207267.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:07.782Z,1513207267.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:08.103Z,1513207268.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:08.504Z,1513207268.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:08.577Z,1513207268.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:08.906Z,1513207268.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:09.348Z,1513207269.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:09.373Z,1513207269.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:09.690Z,1513207269.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:09.805Z,1513207269.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:10.069Z,1513207270.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:10.560Z,1513207270.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:10.601Z,1513207270.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:10.909Z,1513207270.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:11.352Z,1513207271.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:11.398Z,1513207271.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:11.714Z,1513207271.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:11.802Z,1513207271.802 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:12.123Z,1513207272.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:12.508Z,1513207272.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:12.598Z,1513207272.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:12.962Z,1513207272.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:13.311Z,1513207273.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:13.394Z,1513207273.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:13.699Z,1513207273.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:13.798Z,1513207273.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:14.114Z,1513207274.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:14.528Z,1513207274.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:14.593Z,1513207274.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:14.987Z,1513207274.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:15.308Z,1513207275.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:15.390Z,1513207275.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:15.675Z,1513207275.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:15.793Z,1513207275.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:16.132Z,1513207276.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:16.493Z,1513207276.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:16.592Z,1513207276.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:16.978Z,1513207276.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:17.366Z,1513207277.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:17.385Z,1513207277.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:17.718Z,1513207277.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:17.790Z,1513207277.790 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:18.110Z,1513207278.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:18.510Z,1513207278.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:18.586Z,1513207278.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:18.888Z,1513207278.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:19.301Z,1513207279.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:19.382Z,1513207279.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:19.709Z,1513207279.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:19.785Z,1513207279.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:20.099Z,1513207280.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:20.562Z,1513207280.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:20.581Z,1513207280.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:20.903Z,1513207280.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:21.377Z,1513207281.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:21.434Z,1513207281.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:21.770Z,1513207281.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:21.781Z,1513207281.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:22.168Z,1513207282.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:22.578Z,1513207282.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:22.579Z,1513207282.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:22.940Z,1513207282.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:23.373Z,1513207283.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:23.377Z,1513207283.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:23.713Z,1513207283.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:23.785Z,1513207283.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:24.122Z,1513207284.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:24.506Z,1513207284.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:24.582Z,1513207284.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:24.892Z,1513207284.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:25.377Z,1513207285.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:25.435Z,1513207285.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:25.711Z,1513207285.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:25.781Z,1513207285.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:26.119Z,1513207286.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:26.561Z,1513207286.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:26.578Z,1513207286.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:26.879Z,1513207286.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:27.315Z,1513207287.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:27.373Z,1513207287.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:27.715Z,1513207287.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:27.777Z,1513207287.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:28.116Z,1513207288.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:28.547Z,1513207288.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:28.574Z,1513207288.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:29.027Z,1513207289.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:29.299Z,1513207289.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:29.369Z,1513207289.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:29.690Z,1513207289.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:29.774Z,1513207289.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:30.091Z,1513207290.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:30.491Z,1513207290.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:30.570Z,1513207290.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:30.955Z,1513207290.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:31.335Z,1513207291.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:31.366Z,1513207291.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:31.720Z,1513207291.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:31.769Z,1513207291.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:32.566Z,1513207292.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:33.361Z,1513207293.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:33.765Z,1513207293.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:34.561Z,1513207294.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:35.361Z,1513207295.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:35.766Z,1513207295.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:36.562Z,1513207296.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:37.144Z,1513207297.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:37.357Z,1513207297.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:37.367Z,1513207297.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:37.676Z,1513207297.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:37.774Z,1513207297.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:38.071Z,1513207298.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:38.443Z,1513207298.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:38.569Z,1513207298.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:38.845Z,1513207298.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:39.351Z,1513207299.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:39.365Z,1513207299.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:39.684Z,1513207299.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:39.770Z,1513207299.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:40.089Z,1513207300.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:40.462Z,1513207300.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:40.566Z,1513207300.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:40.864Z,1513207300.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:41.269Z,1513207301.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:41.363Z,1513207301.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:41.669Z,1513207301.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:41.765Z,1513207301.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:42.080Z,1513207302.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:42.482Z,1513207302.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:42.561Z,1513207302.561 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:42.868Z,1513207302.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:43.256Z,1513207303.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:43.358Z,1513207303.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:43.642Z,1513207303.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:44.075Z,1513207304.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:44.154Z,1513207304.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:44.486Z,1513207304.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:44.558Z,1513207304.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:44.971Z,1513207304.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:45.280Z,1513207305.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:45.354Z,1513207305.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:45.695Z,1513207305.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:45.758Z,1513207305.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:46.084Z,1513207306.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:46.481Z,1513207306.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:46.554Z,1513207306.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:46.859Z,1513207306.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:47.276Z,1513207307.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:47.350Z,1513207307.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:47.685Z,1513207307.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:47.754Z,1513207307.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:48.108Z,1513207308.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:48.501Z,1513207308.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:48.549Z,1513207308.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:48.861Z,1513207308.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:49.319Z,1513207309.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:49.345Z,1513207309.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:49.652Z,1513207309.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:49.750Z,1513207309.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:50.131Z,1513207310.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:50.486Z,1513207310.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:50.546Z,1513207310.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:50.895Z,1513207310.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:51.334Z,1513207311.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:51.341Z,1513207311.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:51.680Z,1513207311.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:51.786Z,1513207311.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:52.121Z,1513207312.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:52.479Z,1513207312.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:52.582Z,1513207312.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:52.884Z,1513207312.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:53.379Z,1513207313.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:53.391Z,1513207313.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:53.664Z,1513207313.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:53.781Z,1513207313.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:54.066Z,1513207314.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:54.482Z,1513207314.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:54.577Z,1513207314.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:54.953Z,1513207314.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:55.292Z,1513207315.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:55.374Z,1513207315.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:55.712Z,1513207315.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:55.777Z,1513207315.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:56.098Z,1513207316.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:56.508Z,1513207316.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:56.574Z,1513207316.574 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:56.867Z,1513207316.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:57.283Z,1513207317.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:57.370Z,1513207317.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:57.719Z,1513207317.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:57.773Z,1513207317.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:58.094Z,1513207318.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:58.504Z,1513207318.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:58.569Z,1513207318.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:58.858Z,1513207318.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:59.291Z,1513207319.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:59.365Z,1513207319.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:21:59.653Z,1513207319.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:21:59.769Z,1513207319.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:00.074Z,1513207320.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:00.504Z,1513207320.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:00.876Z,1513207320.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:01.347Z,1513207321.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:01.706Z,1513207321.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:02.068Z,1513207322.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:02.479Z,1513207322.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:02.882Z,1513207322.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:03.279Z,1513207323.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:03.697Z,1513207323.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:04.084Z,1513207324.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:04.468Z,1513207324.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:04.850Z,1513207324.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:05.328Z,1513207325.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:05.651Z,1513207325.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:06.089Z,1513207326.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:06.513Z,1513207326.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:06.905Z,1513207326.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:07.335Z,1513207327.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:07.698Z,1513207327.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:08.091Z,1513207328.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:08.488Z,1513207328.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:08.921Z,1513207328.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:09.275Z,1513207329.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:09.675Z,1513207329.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:10.139Z,1513207330.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:10.463Z,1513207330.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:10.547Z,1513207330.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:10.983Z,1513207330.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:11.316Z,1513207331.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:11.341Z,1513207331.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:11.656Z,1513207331.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:11.745Z,1513207331.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:12.072Z,1513207332.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:12.515Z,1513207332.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:12.541Z,1513207332.541 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:12.866Z,1513207332.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:13.280Z,1513207333.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:13.339Z,1513207333.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:13.681Z,1513207333.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:13.742Z,1513207333.742 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:14.050Z,1513207334.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:14.504Z,1513207334.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:14.537Z,1513207334.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:14.859Z,1513207334.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:15.303Z,1513207335.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:15.334Z,1513207335.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:15.660Z,1513207335.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:15.738Z,1513207335.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:16.094Z,1513207336.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:16.460Z,1513207336.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:16.890Z,1513207336.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:17.278Z,1513207337.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:17.677Z,1513207337.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:18.069Z,1513207338.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:18.471Z,1513207338.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:18.868Z,1513207338.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:19.317Z,1513207339.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:19.670Z,1513207339.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:20.047Z,1513207340.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:20.486Z,1513207340.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:20.845Z,1513207340.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:21.344Z,1513207341.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:21.679Z,1513207341.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:22.113Z,1513207342.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:22.475Z,1513207342.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:22.876Z,1513207342.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:23.269Z,1513207343.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:23.711Z,1513207343.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:24.068Z,1513207344.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:24.510Z,1513207344.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:24.863Z,1513207344.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:25.281Z,1513207345.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:25.683Z,1513207345.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:26.073Z,1513207346.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:26.536Z,1513207346.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:26.871Z,1513207346.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:27.385Z,1513207347.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:27.726Z,1513207347.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:28.102Z,1513207348.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:28.491Z,1513207348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:28.961Z,1513207348.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:29.250Z,1513207349.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:29.669Z,1513207349.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:30.111Z,1513207350.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:30.504Z,1513207350.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:30.873Z,1513207350.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:31.278Z,1513207351.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:31.690Z,1513207351.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:32.083Z,1513207352.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:38.538Z,1513207358.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:38.878Z,1513207358.878 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:22:38.878Z,1513207358.878 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:22:38.878Z,1513207358.878 [BPC1](ERROR): Communications Fault
2017-12-13T23:22:38.974Z,1513207358.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:38.987Z,1513207358.987 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:22:39.092Z,1513207359.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:39.334Z,1513207359.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:39.488Z,1513207359.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:39.737Z,1513207359.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:39.888Z,1513207359.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:39.919Z,1513207359.919 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:22:39.919Z,1513207359.919 [BPC1] No Fault, FailCount= 1
2017-12-13T23:22:40.367Z,1513207360.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:40.534Z,1513207360.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:40.682Z,1513207360.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:41.091Z,1513207361.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:41.330Z,1513207361.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:41.479Z,1513207361.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:41.734Z,1513207361.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:41.897Z,1513207361.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:42.310Z,1513207362.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:42.529Z,1513207362.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:42.688Z,1513207362.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:43.102Z,1513207363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:43.326Z,1513207363.326 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:43.502Z,1513207363.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:43.729Z,1513207363.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:43.871Z,1513207363.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:44.356Z,1513207364.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:44.702Z,1513207364.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:45.073Z,1513207365.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:45.477Z,1513207365.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:45.872Z,1513207365.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:46.248Z,1513207366.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:46.680Z,1513207366.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:47.108Z,1513207367.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:47.497Z,1513207367.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:47.875Z,1513207367.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:48.310Z,1513207368.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:48.723Z,1513207368.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:49.083Z,1513207369.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:49.472Z,1513207369.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:49.871Z,1513207369.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:50.279Z,1513207370.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:50.712Z,1513207370.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:51.078Z,1513207371.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:51.499Z,1513207371.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:51.899Z,1513207371.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:52.291Z,1513207372.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:52.671Z,1513207372.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:53.101Z,1513207373.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:53.101Z,1513207373.101 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2017-12-13T23:22:53.101Z,1513207373.101 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:22:53.103Z,1513207373.103 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:53.103Z,1513207373.103 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2017-12-13T23:22:53.103Z,1513207373.103 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:22:53.112Z,1513207373.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:53.112Z,1513207373.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-12-13T23:22:53.112Z,1513207373.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:22:53.173Z,1513207373.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:22:53.174Z,1513207373.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:22:53.174Z,1513207373.174 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:22:53.548Z,1513207373.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:22:53.548Z,1513207373.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2017-12-13T23:22:53.548Z,1513207373.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:22:53.548Z,1513207373.548 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2017-12-13T23:22:53.569Z,1513207373.569 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:22:53.569Z,1513207373.569 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-12-13T23:22:53.872Z,1513207373.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:22:53.873Z,1513207373.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:22:53.873Z,1513207373.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:22:53.874Z,1513207373.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:22:53.874Z,1513207373.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:22:53.874Z,1513207373.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:22:53.875Z,1513207373.875 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:22:53.875Z,1513207373.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:22:53.875Z,1513207373.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:22:54.296Z,1513207374.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:54.505Z,1513207374.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:54.680Z,1513207374.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:55.095Z,1513207375.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:55.301Z,1513207375.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:55.503Z,1513207375.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:55.705Z,1513207375.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:55.895Z,1513207375.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:56.301Z,1513207376.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:56.502Z,1513207376.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:56.717Z,1513207376.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:57.116Z,1513207377.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:57.301Z,1513207377.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:57.496Z,1513207377.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:57.706Z,1513207377.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:57.928Z,1513207377.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:58.287Z,1513207378.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:58.502Z,1513207378.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:58.700Z,1513207378.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:59.105Z,1513207379.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:59.298Z,1513207379.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:59.487Z,1513207379.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:22:59.702Z,1513207379.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:22:59.888Z,1513207379.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:00.314Z,1513207380.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:00.778Z,1513207380.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:01.098Z,1513207381.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:01.509Z,1513207381.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:01.912Z,1513207381.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:02.291Z,1513207382.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:02.691Z,1513207382.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:03.085Z,1513207383.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:03.491Z,1513207383.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:03.906Z,1513207383.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:04.269Z,1513207384.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:04.733Z,1513207384.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:05.140Z,1513207385.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:05.491Z,1513207385.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:05.876Z,1513207385.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:06.306Z,1513207386.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:06.712Z,1513207386.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:07.103Z,1513207387.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:07.493Z,1513207387.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:07.871Z,1513207387.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:08.307Z,1513207388.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:08.724Z,1513207388.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:09.088Z,1513207389.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:09.485Z,1513207389.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:09.919Z,1513207389.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:10.286Z,1513207390.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:10.723Z,1513207390.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:11.110Z,1513207391.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:11.498Z,1513207391.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:11.911Z,1513207391.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:12.304Z,1513207392.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:12.684Z,1513207392.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:13.106Z,1513207393.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:13.472Z,1513207393.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:13.915Z,1513207393.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:14.283Z,1513207394.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:14.674Z,1513207394.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:15.079Z,1513207395.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:15.475Z,1513207395.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:15.883Z,1513207395.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:16.270Z,1513207396.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:16.684Z,1513207396.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:17.080Z,1513207397.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:17.486Z,1513207397.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:17.878Z,1513207397.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:18.294Z,1513207398.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:18.689Z,1513207398.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:19.098Z,1513207399.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:19.463Z,1513207399.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:19.938Z,1513207399.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:20.359Z,1513207400.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:20.671Z,1513207400.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:21.088Z,1513207401.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:21.487Z,1513207401.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:21.909Z,1513207401.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:22.275Z,1513207402.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:22.780Z,1513207402.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:23.105Z,1513207403.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:23.489Z,1513207403.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:23.962Z,1513207403.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:24.291Z,1513207404.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:24.711Z,1513207404.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:25.078Z,1513207405.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:25.512Z,1513207405.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:25.880Z,1513207405.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:26.289Z,1513207406.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:26.695Z,1513207406.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:27.154Z,1513207407.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:27.498Z,1513207407.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:27.914Z,1513207407.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:28.267Z,1513207408.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:28.695Z,1513207408.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:29.112Z,1513207409.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:29.468Z,1513207409.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:29.904Z,1513207409.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:30.275Z,1513207410.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:30.682Z,1513207410.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:31.089Z,1513207411.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:31.499Z,1513207411.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:31.892Z,1513207411.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:32.314Z,1513207412.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:39.678Z,1513207419.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:39.862Z,1513207419.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:40.270Z,1513207420.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:40.654Z,1513207420.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:41.055Z,1513207421.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:41.434Z,1513207421.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:41.839Z,1513207421.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:42.235Z,1513207422.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:42.655Z,1513207422.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:43.008Z,1513207423.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:43.416Z,1513207423.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:43.854Z,1513207423.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:44.246Z,1513207424.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:44.615Z,1513207424.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:45.024Z,1513207425.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:45.439Z,1513207425.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:45.826Z,1513207425.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:46.227Z,1513207426.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:46.636Z,1513207426.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:47.046Z,1513207427.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:47.439Z,1513207427.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:47.807Z,1513207427.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:48.224Z,1513207428.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:48.627Z,1513207428.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:49.024Z,1513207429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:49.419Z,1513207429.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:49.828Z,1513207429.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:50.328Z,1513207430.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:50.617Z,1513207430.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:51.061Z,1513207431.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:51.455Z,1513207431.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:51.926Z,1513207431.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:52.238Z,1513207432.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:52.635Z,1513207432.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:53.055Z,1513207433.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:53.439Z,1513207433.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:53.826Z,1513207433.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:54.218Z,1513207434.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:54.619Z,1513207434.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:55.046Z,1513207435.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:55.483Z,1513207435.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:55.811Z,1513207435.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:56.231Z,1513207436.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:56.629Z,1513207436.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:57.030Z,1513207437.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:57.481Z,1513207437.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:57.836Z,1513207437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:58.233Z,1513207438.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:58.634Z,1513207438.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:59.030Z,1513207439.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:59.444Z,1513207439.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:23:59.805Z,1513207439.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:00.230Z,1513207440.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:00.649Z,1513207440.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:01.027Z,1513207441.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:01.424Z,1513207441.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:01.820Z,1513207441.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:02.278Z,1513207442.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:02.624Z,1513207442.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:03.078Z,1513207443.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:03.505Z,1513207443.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:03.835Z,1513207443.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:04.236Z,1513207444.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:04.676Z,1513207444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:05.028Z,1513207445.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:05.413Z,1513207445.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:05.842Z,1513207445.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:06.204Z,1513207446.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:06.608Z,1513207446.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:07.114Z,1513207447.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:07.434Z,1513207447.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:07.804Z,1513207447.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:08.251Z,1513207448.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:08.603Z,1513207448.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:09.071Z,1513207449.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:09.440Z,1513207449.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:09.832Z,1513207449.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:10.207Z,1513207450.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:10.629Z,1513207450.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:11.021Z,1513207451.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:11.471Z,1513207451.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:11.853Z,1513207451.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:12.244Z,1513207452.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:12.644Z,1513207452.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:13.010Z,1513207453.010 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-13T23:24:13.010Z,1513207453.010 [BPC1] Data Fault, FailCount= 1
2017-12-13T23:24:13.010Z,1513207453.010 [BPC1](ERROR): Data Fault
2017-12-13T23:24:13.065Z,1513207453.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:13.142Z,1513207453.142 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-13T23:24:13.462Z,1513207453.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:13.816Z,1513207453.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:14.231Z,1513207454.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:14.254Z,1513207454.254 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:24:14.254Z,1513207454.254 [BPC1] No Fault, FailCount= 1
2017-12-13T23:24:14.710Z,1513207454.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:15.042Z,1513207455.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:15.444Z,1513207455.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:15.836Z,1513207455.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:16.212Z,1513207456.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:16.607Z,1513207456.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:17.025Z,1513207457.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:17.453Z,1513207457.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:17.816Z,1513207457.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:18.227Z,1513207458.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:18.624Z,1513207458.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:19.034Z,1513207459.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:19.410Z,1513207459.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:19.816Z,1513207459.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:20.241Z,1513207460.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:20.628Z,1513207460.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:21.098Z,1513207461.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:21.440Z,1513207461.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:21.825Z,1513207461.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:22.206Z,1513207462.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:22.601Z,1513207462.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:23.083Z,1513207463.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:23.422Z,1513207463.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:23.846Z,1513207463.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:24.254Z,1513207464.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:24.664Z,1513207464.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:25.062Z,1513207465.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:25.448Z,1513207465.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:25.862Z,1513207465.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:26.238Z,1513207466.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:26.611Z,1513207466.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:27.016Z,1513207467.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:27.434Z,1513207467.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:27.806Z,1513207467.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:28.202Z,1513207468.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:28.618Z,1513207468.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:29.059Z,1513207469.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:29.439Z,1513207469.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:29.838Z,1513207469.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:30.235Z,1513207470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:30.650Z,1513207470.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:31.073Z,1513207471.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:31.076Z,1513207471.076 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-12-13T23:24:31.076Z,1513207471.076 [Default:CheckIn:C.Wait] Stopped
2017-12-13T23:24:31.076Z,1513207471.076 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-12-13T23:24:31.076Z,1513207471.076 [Default:CheckIn:D] Running Loop=1
2017-12-13T23:24:31.440Z,1513207471.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:31.448Z,1513207471.448 [Default:CheckIn:D] Stopped
2017-12-13T23:24:31.448Z,1513207471.448 [Default:CheckIn:E] Running Loop=1
2017-12-13T23:24:31.841Z,1513207471.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:31.849Z,1513207471.849 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.851831 min 
2017-12-13T23:24:31.849Z,1513207471.849 [Default:CheckIn:E] Stopped
2017-12-13T23:24:31.849Z,1513207471.849 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-12-13T23:24:31.849Z,1513207471.849 [Default:CheckIn] Stopped
2017-12-13T23:24:31.850Z,1513207471.850 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-12-13T23:24:31.850Z,1513207471.850 [Default:CheckIn](INFO): Running loop #3
2017-12-13T23:24:31.850Z,1513207471.850 [Default:CheckIn] Running Loop=3
2017-12-13T23:24:31.850Z,1513207471.850 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-12-13T23:24:31.850Z,1513207471.850 [Default:CheckIn:Read_GPS] Running Loop=1
2017-12-13T23:24:32.220Z,1513207472.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:32.608Z,1513207472.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:38.889Z,1513207478.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:39.039Z,1513207479.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:39.403Z,1513207479.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:39.825Z,1513207479.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:40.182Z,1513207480.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:40.628Z,1513207480.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:41.044Z,1513207481.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:41.401Z,1513207481.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:41.795Z,1513207481.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:42.188Z,1513207482.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:42.567Z,1513207482.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:43.043Z,1513207483.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:43.401Z,1513207483.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:43.786Z,1513207483.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:44.173Z,1513207484.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:44.578Z,1513207484.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:45.011Z,1513207485.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:45.367Z,1513207485.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:45.783Z,1513207485.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:46.174Z,1513207486.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:46.570Z,1513207486.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:47.018Z,1513207487.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:47.386Z,1513207487.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:47.826Z,1513207487.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:48.206Z,1513207488.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:48.567Z,1513207488.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:49.075Z,1513207489.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:49.417Z,1513207489.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:49.784Z,1513207489.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:50.199Z,1513207490.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:50.604Z,1513207490.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:51.042Z,1513207491.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:51.443Z,1513207491.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:51.823Z,1513207491.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:52.183Z,1513207492.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:52.567Z,1513207492.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:52.974Z,1513207492.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:53.372Z,1513207493.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:53.787Z,1513207493.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:53.794Z,1513207493.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:24:54.190Z,1513207494.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:54.591Z,1513207494.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:24:54.610Z,1513207494.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:55.003Z,1513207495.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:55.417Z,1513207495.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:55.780Z,1513207495.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:56.167Z,1513207496.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:56.576Z,1513207496.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:57.036Z,1513207497.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:57.393Z,1513207497.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:57.850Z,1513207497.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:58.199Z,1513207498.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:58.612Z,1513207498.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:59.001Z,1513207499.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:59.429Z,1513207499.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:24:59.799Z,1513207499.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:00.224Z,1513207500.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:00.608Z,1513207500.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:01.064Z,1513207501.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:01.459Z,1513207501.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:01.795Z,1513207501.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:02.195Z,1513207502.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:02.593Z,1513207502.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:02.000Z,1513207503.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:03.422Z,1513207503.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:03.804Z,1513207503.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:04.189Z,1513207504.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:04.595Z,1513207504.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:05.065Z,1513207505.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:05.395Z,1513207505.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:05.764Z,1513207505.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:06.197Z,1513207506.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:06.588Z,1513207506.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:07.047Z,1513207507.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:07.391Z,1513207507.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:07.758Z,1513207507.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:08.163Z,1513207508.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:08.566Z,1513207508.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:09.007Z,1513207509.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:09.415Z,1513207509.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:09.783Z,1513207509.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:10.175Z,1513207510.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:10.576Z,1513207510.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:11.099Z,1513207511.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:11.407Z,1513207511.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:11.848Z,1513207511.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:12.194Z,1513207512.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:12.601Z,1513207512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:13.034Z,1513207513.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:13.363Z,1513207513.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:13.765Z,1513207513.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:14.234Z,1513207514.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:14.611Z,1513207514.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:15.011Z,1513207515.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:15.395Z,1513207515.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:15.800Z,1513207515.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:16.167Z,1513207516.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:16.590Z,1513207516.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:17.016Z,1513207517.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:17.397Z,1513207517.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:17.819Z,1513207517.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:18.193Z,1513207518.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:18.587Z,1513207518.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:19.044Z,1513207519.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:19.387Z,1513207519.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:19.779Z,1513207519.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:20.184Z,1513207520.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:20.585Z,1513207520.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:21.043Z,1513207521.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:21.406Z,1513207521.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:21.775Z,1513207521.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:22.185Z,1513207522.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:22.608Z,1513207522.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:22.988Z,1513207522.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:23.407Z,1513207523.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:23.835Z,1513207523.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:24.247Z,1513207524.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:24.582Z,1513207524.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:25.027Z,1513207525.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:25.408Z,1513207525.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:25.796Z,1513207525.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:26.210Z,1513207526.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:26.600Z,1513207526.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:27.011Z,1513207527.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:27.372Z,1513207527.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:27.782Z,1513207527.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:28.187Z,1513207528.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:28.599Z,1513207528.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:29.028Z,1513207529.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:29.387Z,1513207529.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:29.780Z,1513207529.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:30.191Z,1513207530.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:30.559Z,1513207530.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:31.024Z,1513207531.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:31.367Z,1513207531.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:31.772Z,1513207531.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:32.164Z,1513207532.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:32.595Z,1513207532.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:33.054Z,1513207533.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:39.243Z,1513207539.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:39.395Z,1513207539.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:39.780Z,1513207539.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:40.218Z,1513207540.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:40.574Z,1513207540.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:40.983Z,1513207540.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:41.402Z,1513207541.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:41.773Z,1513207541.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:42.170Z,1513207542.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:42.574Z,1513207542.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:42.987Z,1513207542.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:43.350Z,1513207543.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:43.773Z,1513207543.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:44.177Z,1513207544.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:44.575Z,1513207544.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:45.038Z,1513207545.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:45.383Z,1513207545.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:45.822Z,1513207545.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:46.167Z,1513207546.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:46.556Z,1513207546.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:47.058Z,1513207547.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:47.404Z,1513207547.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:47.832Z,1513207547.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:48.166Z,1513207548.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:48.561Z,1513207548.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:49.003Z,1513207549.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:49.412Z,1513207549.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:49.760Z,1513207549.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:49.794Z,1513207549.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:25:50.177Z,1513207550.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:50.586Z,1513207550.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:50.601Z,1513207550.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:25:51.056Z,1513207551.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:51.404Z,1513207551.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:51.780Z,1513207551.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:52.238Z,1513207552.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:52.585Z,1513207552.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:53.063Z,1513207553.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:53.383Z,1513207553.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:53.766Z,1513207553.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:54.220Z,1513207554.220 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:54.220Z,1513207554.220 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2017-12-13T23:25:54.220Z,1513207554.220 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:25:54.222Z,1513207554.222 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:54.222Z,1513207554.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2017-12-13T23:25:54.222Z,1513207554.222 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:25:54.224Z,1513207554.224 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:54.224Z,1513207554.224 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-12-13T23:25:54.224Z,1513207554.224 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:25:54.284Z,1513207554.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:25:54.284Z,1513207554.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:25:54.284Z,1513207554.284 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:25:54.613Z,1513207554.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:25:54.613Z,1513207554.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2017-12-13T23:25:54.614Z,1513207554.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:25:54.614Z,1513207554.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2017-12-13T23:25:54.614Z,1513207554.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:25:54.614Z,1513207554.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-12-13T23:25:55.010Z,1513207555.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:25:55.010Z,1513207555.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:25:55.011Z,1513207555.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:25:55.011Z,1513207555.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:25:55.011Z,1513207555.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:25:55.012Z,1513207555.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:25:55.012Z,1513207555.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:25:55.025Z,1513207555.025 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:25:55.025Z,1513207555.025 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:25:55.408Z,1513207555.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:55.784Z,1513207555.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:56.176Z,1513207556.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:56.579Z,1513207556.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:57.041Z,1513207557.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:57.379Z,1513207557.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:57.780Z,1513207557.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:58.187Z,1513207558.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:58.559Z,1513207558.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:58.995Z,1513207558.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:59.394Z,1513207559.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:25:59.797Z,1513207559.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:00.167Z,1513207560.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:00.564Z,1513207560.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:01.068Z,1513207561.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:01.390Z,1513207561.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:01.786Z,1513207561.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:02.188Z,1513207562.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:02.591Z,1513207562.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:02.988Z,1513207562.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:03.434Z,1513207563.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:03.784Z,1513207563.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:04.154Z,1513207564.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:04.584Z,1513207564.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:04.991Z,1513207564.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:05.405Z,1513207565.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:05.858Z,1513207565.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:06.189Z,1513207566.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:06.601Z,1513207566.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:07.017Z,1513207567.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:07.383Z,1513207567.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:07.788Z,1513207567.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:08.178Z,1513207568.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:08.580Z,1513207568.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:09.012Z,1513207569.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:09.490Z,1513207569.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:09.797Z,1513207569.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:10.158Z,1513207570.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:10.617Z,1513207570.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:11.029Z,1513207571.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:11.376Z,1513207571.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:11.799Z,1513207571.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:12.163Z,1513207572.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:12.585Z,1513207572.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:13.067Z,1513207573.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:13.375Z,1513207573.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:13.828Z,1513207573.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:14.187Z,1513207574.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:14.607Z,1513207574.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:15.041Z,1513207575.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:15.359Z,1513207575.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:15.761Z,1513207575.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:16.171Z,1513207576.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:16.568Z,1513207576.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:17.023Z,1513207577.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:17.356Z,1513207577.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:17.792Z,1513207577.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:18.188Z,1513207578.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:18.592Z,1513207578.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:18.994Z,1513207578.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:19.395Z,1513207579.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:19.767Z,1513207579.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:20.207Z,1513207580.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:20.599Z,1513207580.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:21.005Z,1513207581.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:21.423Z,1513207581.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:21.784Z,1513207581.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:22.205Z,1513207582.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:22.566Z,1513207582.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:23.055Z,1513207583.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:23.417Z,1513207583.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:23.791Z,1513207583.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:24.181Z,1513207584.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:24.589Z,1513207584.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:25.030Z,1513207585.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:25.403Z,1513207585.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:25.784Z,1513207585.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:26.194Z,1513207586.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:26.554Z,1513207586.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:27.051Z,1513207587.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:27.411Z,1513207587.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:27.789Z,1513207587.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:28.174Z,1513207588.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:28.580Z,1513207588.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:29.023Z,1513207589.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:29.395Z,1513207589.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:29.799Z,1513207589.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:30.187Z,1513207590.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:30.598Z,1513207590.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:30.962Z,1513207590.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:31.414Z,1513207591.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:31.778Z,1513207591.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:32.177Z,1513207592.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:32.584Z,1513207592.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:32.982Z,1513207592.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:33.375Z,1513207593.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:41.014Z,1513207601.014 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:26:41.014Z,1513207601.014 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:26:41.014Z,1513207601.014 [BPC1](ERROR): Communications Fault
2017-12-13T23:26:41.081Z,1513207601.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:41.105Z,1513207601.105 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:26:41.236Z,1513207601.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:41.659Z,1513207601.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:42.059Z,1513207602.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:42.110Z,1513207602.110 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:26:42.110Z,1513207602.110 [BPC1] No Fault, FailCount= 1
2017-12-13T23:26:42.532Z,1513207602.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:42.859Z,1513207602.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:43.255Z,1513207603.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:43.660Z,1513207603.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:44.062Z,1513207604.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:44.434Z,1513207604.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:44.853Z,1513207604.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:45.315Z,1513207605.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:45.632Z,1513207605.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:46.024Z,1513207606.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:46.439Z,1513207606.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:46.848Z,1513207606.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:47.326Z,1513207607.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:47.645Z,1513207607.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:48.071Z,1513207608.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:48.436Z,1513207608.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:48.838Z,1513207608.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:49.235Z,1513207609.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:49.626Z,1513207609.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:50.029Z,1513207610.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:50.456Z,1513207610.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:50.855Z,1513207610.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:51.269Z,1513207611.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:51.640Z,1513207611.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:52.024Z,1513207612.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:52.435Z,1513207612.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:52.854Z,1513207612.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:53.239Z,1513207613.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:53.646Z,1513207613.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:54.041Z,1513207614.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:54.422Z,1513207614.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:54.835Z,1513207614.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:55.231Z,1513207615.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:55.623Z,1513207615.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:56.062Z,1513207616.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:56.435Z,1513207616.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:56.887Z,1513207616.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:57.224Z,1513207617.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:57.624Z,1513207617.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:58.041Z,1513207618.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:58.423Z,1513207618.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:58.828Z,1513207618.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:59.375Z,1513207619.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:26:59.639Z,1513207619.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:00.031Z,1513207620.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:00.435Z,1513207620.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:00.834Z,1513207620.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:01.325Z,1513207621.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:01.622Z,1513207621.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:02.111Z,1513207622.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:02.443Z,1513207622.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:02.853Z,1513207622.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:03.280Z,1513207623.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:03.625Z,1513207623.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:04.027Z,1513207624.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:04.468Z,1513207624.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:04.832Z,1513207624.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:05.259Z,1513207625.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:05.624Z,1513207625.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:06.057Z,1513207626.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:06.452Z,1513207626.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:06.872Z,1513207626.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:07.251Z,1513207627.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:07.654Z,1513207627.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:08.072Z,1513207628.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:08.456Z,1513207628.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:08.856Z,1513207628.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:09.280Z,1513207629.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:09.646Z,1513207629.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:10.038Z,1513207630.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:10.450Z,1513207630.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:10.811Z,1513207630.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:11.303Z,1513207631.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:11.663Z,1513207631.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:12.061Z,1513207632.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:12.424Z,1513207632.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:12.835Z,1513207632.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:13.302Z,1513207633.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:13.735Z,1513207633.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:14.074Z,1513207634.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:14.482Z,1513207634.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:14.846Z,1513207634.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:15.295Z,1513207635.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:15.633Z,1513207635.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:16.047Z,1513207636.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:16.469Z,1513207636.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:16.842Z,1513207636.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:17.273Z,1513207637.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:17.640Z,1513207637.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:18.069Z,1513207638.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:18.423Z,1513207638.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:18.851Z,1513207638.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:19.243Z,1513207639.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:19.651Z,1513207639.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:20.051Z,1513207640.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:20.444Z,1513207640.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:20.823Z,1513207640.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:21.232Z,1513207641.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:21.627Z,1513207641.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:22.041Z,1513207642.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:22.439Z,1513207642.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:22.827Z,1513207642.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:23.274Z,1513207643.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:23.655Z,1513207643.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:24.066Z,1513207644.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:24.503Z,1513207644.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:24.825Z,1513207644.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:25.238Z,1513207645.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:25.670Z,1513207645.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:26.091Z,1513207646.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:26.452Z,1513207646.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:26.873Z,1513207646.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:27.291Z,1513207647.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:27.643Z,1513207647.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:28.066Z,1513207648.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:28.438Z,1513207648.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:28.871Z,1513207648.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:29.323Z,1513207649.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:29.654Z,1513207649.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:30.044Z,1513207650.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:30.472Z,1513207650.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:30.840Z,1513207650.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:31.256Z,1513207651.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:31.612Z,1513207651.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:32.085Z,1513207652.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:32.444Z,1513207652.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:32.843Z,1513207652.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:33.236Z,1513207653.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:33.686Z,1513207653.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:38.407Z,1513207658.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:38.579Z,1513207658.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:39.014Z,1513207659.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:39.347Z,1513207659.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:39.749Z,1513207659.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:40.153Z,1513207660.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:40.575Z,1513207660.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:40.973Z,1513207660.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:41.375Z,1513207661.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:41.756Z,1513207661.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:42.165Z,1513207662.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:42.536Z,1513207662.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:42.946Z,1513207662.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:43.378Z,1513207663.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:43.776Z,1513207663.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:44.131Z,1513207664.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:44.548Z,1513207664.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:45.057Z,1513207665.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:45.364Z,1513207665.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:45.777Z,1513207665.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:46.131Z,1513207666.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:46.551Z,1513207666.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:47.066Z,1513207667.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:47.378Z,1513207667.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:47.757Z,1513207667.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:48.138Z,1513207668.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:48.578Z,1513207668.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:49.015Z,1513207669.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:49.332Z,1513207669.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:49.778Z,1513207669.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:50.115Z,1513207670.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:50.606Z,1513207670.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:51.031Z,1513207671.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:51.379Z,1513207671.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:51.757Z,1513207671.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:52.155Z,1513207672.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:52.543Z,1513207672.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:53.059Z,1513207673.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:53.342Z,1513207673.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:53.751Z,1513207673.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:54.128Z,1513207674.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:54.528Z,1513207674.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:54.947Z,1513207674.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:55.378Z,1513207675.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:55.740Z,1513207675.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:56.127Z,1513207676.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:56.535Z,1513207676.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:57.012Z,1513207677.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:57.360Z,1513207677.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:57.739Z,1513207677.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:58.147Z,1513207678.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:58.542Z,1513207678.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:58.000Z,1513207679.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:59.343Z,1513207679.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:27:59.763Z,1513207679.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:00.131Z,1513207680.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:00.583Z,1513207680.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:00.999Z,1513207680.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:01.366Z,1513207681.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:01.740Z,1513207681.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:02.135Z,1513207682.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:02.534Z,1513207682.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:03.077Z,1513207683.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:03.385Z,1513207683.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:03.818Z,1513207683.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:04.172Z,1513207684.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:04.562Z,1513207684.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:05.047Z,1513207685.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:05.362Z,1513207685.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:05.731Z,1513207685.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:06.164Z,1513207686.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:06.562Z,1513207686.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:07.071Z,1513207687.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:07.400Z,1513207687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:07.747Z,1513207687.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:08.123Z,1513207688.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:08.549Z,1513207688.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:08.947Z,1513207688.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:09.369Z,1513207689.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:09.747Z,1513207689.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:10.160Z,1513207690.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:10.482Z,1513207690.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:10.559Z,1513207690.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:11.004Z,1513207691.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:11.279Z,1513207691.279 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:11.416Z,1513207691.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:11.731Z,1513207691.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:11.741Z,1513207691.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:12.202Z,1513207692.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:12.538Z,1513207692.538 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:12.544Z,1513207692.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:13.039Z,1513207693.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:13.334Z,1513207693.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:13.366Z,1513207693.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:13.738Z,1513207693.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:13.786Z,1513207693.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:14.143Z,1513207694.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:14.556Z,1513207694.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:15.009Z,1513207695.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:15.371Z,1513207695.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:15.731Z,1513207695.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:16.148Z,1513207696.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:16.578Z,1513207696.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:17.026Z,1513207697.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:17.344Z,1513207697.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:17.739Z,1513207697.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:18.155Z,1513207698.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:18.531Z,1513207698.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:19.030Z,1513207699.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:19.344Z,1513207699.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:19.751Z,1513207699.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:20.150Z,1513207700.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:20.524Z,1513207700.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:21.012Z,1513207701.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:21.332Z,1513207701.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:21.750Z,1513207701.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:22.191Z,1513207702.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:22.557Z,1513207702.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:22.937Z,1513207702.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:23.368Z,1513207703.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:23.771Z,1513207703.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:24.160Z,1513207704.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:24.554Z,1513207704.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:24.922Z,1513207704.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:25.392Z,1513207705.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:25.747Z,1513207705.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:26.152Z,1513207706.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:26.567Z,1513207706.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:27.060Z,1513207707.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:27.363Z,1513207707.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:27.764Z,1513207707.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:28.180Z,1513207708.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:28.566Z,1513207708.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:29.004Z,1513207709.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:29.359Z,1513207709.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:29.747Z,1513207709.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:30.131Z,1513207710.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:30.547Z,1513207710.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:30.986Z,1513207710.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:31.382Z,1513207711.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:31.756Z,1513207711.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:32.155Z,1513207712.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:32.535Z,1513207712.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:32.995Z,1513207712.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:33.342Z,1513207713.342 [BPC1](ERROR): Failed to parse bank A battery data
2017-12-13T23:28:33.342Z,1513207713.342 [BPC1] Data Fault, FailCount= 1
2017-12-13T23:28:33.342Z,1513207713.342 [BPC1](ERROR): Data Fault
2017-12-13T23:28:33.367Z,1513207713.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:33.415Z,1513207713.415 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-13T23:28:33.737Z,1513207713.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:38.502Z,1513207718.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:39.298Z,1513207719.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:39.701Z,1513207719.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:41.249Z,1513207721.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:41.439Z,1513207721.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:41.485Z,1513207721.485 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:28:41.485Z,1513207721.485 [BPC1] No Fault, FailCount= 1
2017-12-13T23:28:41.880Z,1513207721.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:42.163Z,1513207722.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:42.588Z,1513207722.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:43.033Z,1513207723.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:43.380Z,1513207723.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:43.784Z,1513207723.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:44.221Z,1513207724.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:44.591Z,1513207724.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:45.005Z,1513207725.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:45.366Z,1513207725.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:45.772Z,1513207725.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:46.189Z,1513207726.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:46.232Z,1513207726.232 [CBIT](DEBUG): EFC running - data check-sum false
2017-12-13T23:28:46.606Z,1513207726.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:47.036Z,1513207727.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:47.404Z,1513207727.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:47.789Z,1513207727.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:48.173Z,1513207728.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:48.576Z,1513207728.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:49.035Z,1513207729.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:49.411Z,1513207729.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:49.780Z,1513207729.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:50.228Z,1513207730.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:50.591Z,1513207730.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:50.963Z,1513207730.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:51.416Z,1513207731.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:51.794Z,1513207731.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:52.192Z,1513207732.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:52.494Z,1513207732.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:52.602Z,1513207732.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:53.018Z,1513207733.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:53.290Z,1513207733.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:53.414Z,1513207733.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:53.694Z,1513207733.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-12-13T23:28:53.815Z,1513207733.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:54.203Z,1513207734.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:54.570Z,1513207734.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:55.004Z,1513207735.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:55.018Z,1513207735.018 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:55.018Z,1513207735.018 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2017-12-13T23:28:55.018Z,1513207735.018 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:28:55.020Z,1513207735.020 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:55.020Z,1513207735.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-12-13T23:28:55.020Z,1513207735.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:28:55.087Z,1513207735.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:28:55.087Z,1513207735.087 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:28:55.401Z,1513207735.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:55.401Z,1513207735.401 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2017-12-13T23:28:55.401Z,1513207735.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:28:55.442Z,1513207735.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:28:55.442Z,1513207735.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:28:55.442Z,1513207735.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2017-12-13T23:28:55.442Z,1513207735.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:28:55.443Z,1513207735.443 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-12-13T23:28:55.799Z,1513207735.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:28:55.800Z,1513207735.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:28:55.800Z,1513207735.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:28:55.805Z,1513207735.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:28:55.805Z,1513207735.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:28:55.806Z,1513207735.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:28:55.870Z,1513207735.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:28:55.870Z,1513207735.870 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2017-12-13T23:28:56.201Z,1513207736.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:28:56.201Z,1513207736.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:28:56.202Z,1513207736.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:28:56.568Z,1513207736.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:57.004Z,1513207737.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:57.427Z,1513207737.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:57.789Z,1513207737.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:58.211Z,1513207738.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:58.589Z,1513207738.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:59.007Z,1513207739.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:59.414Z,1513207739.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:28:59.767Z,1513207739.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:00.168Z,1513207740.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:00.571Z,1513207740.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:01.064Z,1513207741.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:01.387Z,1513207741.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:01.855Z,1513207741.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:02.298Z,1513207742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:02.579Z,1513207742.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:03.075Z,1513207743.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:03.425Z,1513207743.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:03.832Z,1513207743.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:04.210Z,1513207744.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:04.630Z,1513207744.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:05.007Z,1513207745.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:05.416Z,1513207745.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:05.787Z,1513207745.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:06.176Z,1513207746.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:06.580Z,1513207746.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:06.988Z,1513207746.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:07.391Z,1513207747.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:07.775Z,1513207747.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:08.180Z,1513207748.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:08.586Z,1513207748.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:09.001Z,1513207749.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:09.370Z,1513207749.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:09.776Z,1513207749.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:10.214Z,1513207750.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:10.581Z,1513207750.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:11.038Z,1513207751.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:11.395Z,1513207751.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:11.806Z,1513207751.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:12.202Z,1513207752.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:12.602Z,1513207752.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:13.016Z,1513207753.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:13.393Z,1513207753.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:13.794Z,1513207753.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:14.191Z,1513207754.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:14.592Z,1513207754.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:15.061Z,1513207755.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:15.368Z,1513207755.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:15.811Z,1513207755.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:16.221Z,1513207756.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:16.619Z,1513207756.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:17.057Z,1513207757.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:17.400Z,1513207757.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:17.787Z,1513207757.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:18.186Z,1513207758.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:18.565Z,1513207758.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:18.999Z,1513207758.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:19.407Z,1513207759.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:19.806Z,1513207759.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:20.182Z,1513207760.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:20.588Z,1513207760.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:20.971Z,1513207760.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:21.461Z,1513207761.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:21.783Z,1513207761.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:22.180Z,1513207762.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:22.618Z,1513207762.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:23.011Z,1513207763.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:23.426Z,1513207763.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:23.796Z,1513207763.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:24.175Z,1513207764.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:24.608Z,1513207764.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:25.013Z,1513207765.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:25.382Z,1513207765.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:25.795Z,1513207765.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:26.186Z,1513207766.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:26.556Z,1513207766.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:27.056Z,1513207767.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:27.362Z,1513207767.362 [BPC1](ERROR): Failed to receive battery data
2017-12-13T23:29:27.362Z,1513207767.362 [BPC1] Communications Fault, FailCount= 1
2017-12-13T23:29:27.362Z,1513207767.362 [BPC1](ERROR): Communications Fault
2017-12-13T23:29:27.370Z,1513207767.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:27.421Z,1513207767.421 [CBIT](ERROR): Communications Fault in component: BPC1
2017-12-13T23:29:27.797Z,1513207767.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:28.200Z,1513207768.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:28.650Z,1513207768.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:28.712Z,1513207768.712 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:29:28.712Z,1513207768.712 [BPC1] No Fault, FailCount= 1
2017-12-13T23:29:29.119Z,1513207769.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:29.369Z,1513207769.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:29.765Z,1513207769.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:30.187Z,1513207770.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:30.592Z,1513207770.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:31.059Z,1513207771.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:31.416Z,1513207771.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:31.808Z,1513207771.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:32.198Z,1513207772.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:32.214Z,1513207772.214 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-12-13T23:24:31.8Z
2017-12-13T23:29:32.214Z,1513207772.214 [Default:CheckIn:Read_GPS] Stopped
2017-12-13T23:29:32.214Z,1513207772.214 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-12-13T23:29:32.615Z,1513207772.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:41.680Z,1513207781.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:41.851Z,1513207781.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:49.556Z,1513207789.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:49.618Z,1513207789.618 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171213T225830/Courier0012.lzma
2017-12-13T23:29:49.696Z,1513207789.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:50.123Z,1513207790.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:50.419Z,1513207790.419 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Courier0012.lzma.bak
2017-12-13T23:29:50.419Z,1513207790.419 [DataOverHttps](INFO): SBD MOMSN=5436936
2017-12-13T23:29:50.563Z,1513207790.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:52.807Z,1513207792.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:53.035Z,1513207793.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:29:59.923Z,1513207799.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:00.048Z,1513207800.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:00.438Z,1513207800.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:00.797Z,1513207800.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:01.196Z,1513207801.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:01.603Z,1513207801.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:05.312Z,1513207805.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:05.389Z,1513207805.389 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20171213T225830/Express0013.lzma
2017-12-13T23:30:05.463Z,1513207805.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:05.840Z,1513207805.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:06.189Z,1513207806.189 [DataOverHttps](INFO): Moved sent file to Logs/20171213T225830/Express0013.lzma.bak
2017-12-13T23:30:06.189Z,1513207806.189 [DataOverHttps](INFO): SBD MOMSN=5436938
2017-12-13T23:30:06.248Z,1513207806.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:07.598Z,1513207807.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:07.601Z,1513207807.601 [Default:CheckIn:Read_Iridium] Stopped
2017-12-13T23:30:07.601Z,1513207807.601 [Default:CheckIn:C.Wait] Running Loop=1
2017-12-13T23:30:07.601Z,1513207807.601 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-12-13T23:30:07.738Z,1513207807.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:11.193Z,1513207811.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:11.339Z,1513207811.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:11.667Z,1513207811.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:12.073Z,1513207812.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:12.473Z,1513207812.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:12.871Z,1513207812.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:13.310Z,1513207813.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:13.683Z,1513207813.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:14.095Z,1513207814.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:14.558Z,1513207814.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:14.856Z,1513207814.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:15.355Z,1513207815.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:15.666Z,1513207815.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:16.069Z,1513207816.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:16.472Z,1513207816.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:16.879Z,1513207816.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:17.347Z,1513207817.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:17.675Z,1513207817.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:18.078Z,1513207818.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:18.477Z,1513207818.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:18.878Z,1513207818.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:19.304Z,1513207819.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:19.692Z,1513207819.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:20.079Z,1513207820.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:20.478Z,1513207820.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:20.949Z,1513207820.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:21.304Z,1513207821.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:21.676Z,1513207821.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:22.120Z,1513207822.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:22.480Z,1513207822.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:22.960Z,1513207822.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:23.314Z,1513207823.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:23.669Z,1513207823.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:24.091Z,1513207824.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:24.471Z,1513207824.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:24.951Z,1513207824.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:25.284Z,1513207825.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:25.729Z,1513207825.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:26.081Z,1513207826.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:26.478Z,1513207826.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:26.864Z,1513207826.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:27.286Z,1513207827.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:27.696Z,1513207827.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:28.064Z,1513207828.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:28.490Z,1513207828.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:28.895Z,1513207828.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:29.424Z,1513207829.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:29.668Z,1513207829.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:30.064Z,1513207830.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:30.465Z,1513207830.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:30.878Z,1513207830.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:31.358Z,1513207831.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:31.691Z,1513207831.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:32.075Z,1513207832.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:32.478Z,1513207832.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:32.874Z,1513207832.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:33.299Z,1513207833.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:33.680Z,1513207833.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:34.080Z,1513207834.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:34.480Z,1513207834.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:34.975Z,1513207834.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:35.278Z,1513207835.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:35.783Z,1513207835.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:36.080Z,1513207836.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:36.477Z,1513207836.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:36.876Z,1513207836.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:37.290Z,1513207837.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:37.690Z,1513207837.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:38.090Z,1513207838.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:38.491Z,1513207838.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:38.862Z,1513207838.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:39.270Z,1513207839.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:39.668Z,1513207839.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:40.072Z,1513207840.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:40.471Z,1513207840.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:40.872Z,1513207840.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:41.271Z,1513207841.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:41.666Z,1513207841.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:42.069Z,1513207842.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:42.471Z,1513207842.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:42.869Z,1513207842.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:43.362Z,1513207843.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:43.736Z,1513207843.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:44.080Z,1513207844.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:44.467Z,1513207844.467 [BPC1](ERROR): Failed to parse bank B battery data
2017-12-13T23:30:44.467Z,1513207844.467 [BPC1] Data Fault, FailCount= 1
2017-12-13T23:30:44.467Z,1513207844.467 [BPC1](ERROR): Data Fault
2017-12-13T23:30:44.475Z,1513207844.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:44.488Z,1513207844.488 [CBIT](ERROR): Data Fault in component: BPC1
2017-12-13T23:30:44.874Z,1513207844.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:45.379Z,1513207845.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:45.664Z,1513207845.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:45.697Z,1513207845.697 [CBIT](INFO): Clearing failed state for component BPC1
2017-12-13T23:30:45.697Z,1513207845.697 [BPC1] No Fault, FailCount= 1
2017-12-13T23:30:46.156Z,1513207846.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:46.487Z,1513207846.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:46.964Z,1513207846.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:47.275Z,1513207847.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:47.675Z,1513207847.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:48.117Z,1513207848.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:48.456Z,1513207848.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:48.879Z,1513207848.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:49.293Z,1513207849.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:49.672Z,1513207849.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:50.069Z,1513207850.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:50.477Z,1513207850.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:50.871Z,1513207850.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:51.271Z,1513207851.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:51.723Z,1513207851.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:52.079Z,1513207852.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:52.487Z,1513207852.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:52.948Z,1513207852.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:53.273Z,1513207853.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:53.682Z,1513207853.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:54.081Z,1513207854.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:54.494Z,1513207854.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:55.005Z,1513207855.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:55.232Z,1513207855.232 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-12-13T23:30:55.232Z,1513207855.232 [NAL9602] Data Fault, FailCount= 3
2017-12-13T23:30:55.233Z,1513207855.233 [NAL9602](ERROR): Data Fault
2017-12-13T23:30:55.285Z,1513207855.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:55.311Z,1513207855.311 [CBIT](ERROR): Data Fault in component: NAL9602
2017-12-13T23:30:55.631Z,1513207855.631 [NAL9602](INFO): Powering down
2017-12-13T23:30:55.680Z,1513207855.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:56.067Z,1513207856.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:56.466Z,1513207856.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:56.492Z,1513207856.492 [CBIT](INFO): Clearing failed state for component NAL9602
2017-12-13T23:30:56.492Z,1513207856.492 [NAL9602] No Fault, FailCount= 3
2017-12-13T23:30:56.865Z,1513207856.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:57.335Z,1513207857.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:57.673Z,1513207857.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:58.077Z,1513207858.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:58.481Z,1513207858.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:58.858Z,1513207858.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:59.354Z,1513207859.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:30:59.691Z,1513207859.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:00.057Z,1513207860.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:00.465Z,1513207860.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:00.865Z,1513207860.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:01.322Z,1513207861.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:01.674Z,1513207861.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:02.074Z,1513207862.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:02.477Z,1513207862.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:02.966Z,1513207862.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:03.265Z,1513207863.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:03.672Z,1513207863.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:04.080Z,1513207864.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:04.525Z,1513207864.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:04.943Z,1513207864.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:05.324Z,1513207865.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:05.719Z,1513207865.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:06.074Z,1513207866.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:06.499Z,1513207866.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:06.925Z,1513207866.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:07.267Z,1513207867.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:07.699Z,1513207867.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:08.074Z,1513207868.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:11.807Z,1513207871.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:11.947Z,1513207871.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:12.298Z,1513207872.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:12.674Z,1513207872.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:13.068Z,1513207873.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:13.480Z,1513207873.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:13.906Z,1513207873.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:14.274Z,1513207874.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:14.675Z,1513207874.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:15.077Z,1513207875.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:15.480Z,1513207875.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:15.878Z,1513207875.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:16.278Z,1513207876.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:16.677Z,1513207876.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:17.077Z,1513207877.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:17.483Z,1513207877.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:17.879Z,1513207877.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:18.337Z,1513207878.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:18.692Z,1513207878.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:19.090Z,1513207879.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:19.535Z,1513207879.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:19.918Z,1513207879.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:20.315Z,1513207880.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:20.715Z,1513207880.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:21.105Z,1513207881.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:21.480Z,1513207881.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:21.918Z,1513207881.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:22.339Z,1513207882.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:22.678Z,1513207882.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:23.091Z,1513207883.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:23.495Z,1513207883.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:23.880Z,1513207883.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:24.286Z,1513207884.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:24.684Z,1513207884.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:25.069Z,1513207885.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:25.479Z,1513207885.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:25.939Z,1513207885.939 [NAL9602](INFO): Powering up NAL9602
2017-12-13T23:31:26.007Z,1513207886.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:26.306Z,1513207886.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:26.724Z,1513207886.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:27.088Z,1513207887.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:27.490Z,1513207887.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:27.907Z,1513207887.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:28.301Z,1513207888.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:28.772Z,1513207888.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:29.079Z,1513207889.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:29.480Z,1513207889.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:29.875Z,1513207889.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:30.319Z,1513207890.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:30.687Z,1513207890.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:31.070Z,1513207891.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:31.485Z,1513207891.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:31.946Z,1513207891.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:32.298Z,1513207892.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:32.729Z,1513207892.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:33.091Z,1513207893.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:33.520Z,1513207893.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:33.877Z,1513207893.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:34.300Z,1513207894.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:34.676Z,1513207894.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:35.100Z,1513207895.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:35.511Z,1513207895.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:35.885Z,1513207895.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:36.298Z,1513207896.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:36.716Z,1513207896.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:37.044Z,1513207897.044 [NAL9602](INFO): NAL9602 initialized
2017-12-13T23:31:37.091Z,1513207897.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:37.515Z,1513207897.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:37.915Z,1513207897.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:38.299Z,1513207898.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:38.747Z,1513207898.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:39.108Z,1513207899.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:39.502Z,1513207899.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:39.966Z,1513207899.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:40.316Z,1513207900.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:40.707Z,1513207900.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:41.107Z,1513207901.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:41.480Z,1513207901.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:41.911Z,1513207901.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:42.277Z,1513207902.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:42.680Z,1513207902.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:43.112Z,1513207903.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:43.495Z,1513207903.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:43.896Z,1513207903.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:44.293Z,1513207904.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:44.686Z,1513207904.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:45.095Z,1513207905.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:45.485Z,1513207905.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:45.890Z,1513207905.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:46.327Z,1513207906.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:46.695Z,1513207906.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:47.095Z,1513207907.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:47.487Z,1513207907.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:47.892Z,1513207907.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:48.290Z,1513207908.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:48.691Z,1513207908.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:49.096Z,1513207909.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:49.547Z,1513207909.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:49.907Z,1513207909.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:50.286Z,1513207910.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:50.686Z,1513207910.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:51.079Z,1513207911.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:51.487Z,1513207911.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:51.883Z,1513207911.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:52.332Z,1513207912.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:52.787Z,1513207912.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:53.095Z,1513207913.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:53.492Z,1513207913.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:53.915Z,1513207913.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:54.284Z,1513207914.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:54.684Z,1513207914.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.134Z,1513207915.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.498Z,1513207915.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.959Z,1513207915.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.960Z,1513207915.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.977Z,1513207915.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2017-12-13T23:31:55.977Z,1513207915.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-12-13T23:31:55.979Z,1513207915.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:55.979Z,1513207915.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-12-13T23:31:55.979Z,1513207915.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-12-13T23:31:56.023Z,1513207916.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-12-13T23:31:56.024Z,1513207916.024 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-12-13T23:31:56.303Z,1513207916.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:56.303Z,1513207916.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2017-12-13T23:31:56.303Z,1513207916.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-12-13T23:31:56.316Z,1513207916.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-12-13T23:31:56.316Z,1513207916.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-12-13T23:31:56.316Z,1513207916.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2017-12-13T23:31:56.317Z,1513207916.317 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-12-13T23:31:56.317Z,1513207916.317 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-12-13T23:31:56.680Z,1513207916.680 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-12-13T23:31:56.680Z,1513207916.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:31:56.681Z,1513207916.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:31:56.681Z,1513207916.681 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-12-13T23:31:56.681Z,1513207916.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:31:56.682Z,1513207916.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:31:56.736Z,1513207916.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-12-13T23:31:56.737Z,1513207916.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2017-12-13T23:31:57.077Z,1513207917.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-12-13T23:31:57.077Z,1513207917.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-12-13T23:31:57.077Z,1513207917.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-12-13T23:31:57.479Z,1513207917.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:57.887Z,1513207917.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:58.288Z,1513207918.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:58.687Z,1513207918.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:59.086Z,1513207919.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:59.507Z,1513207919.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:31:59.879Z,1513207919.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:00.291Z,1513207920.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:00.679Z,1513207920.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:01.083Z,1513207921.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:01.494Z,1513207921.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:01.903Z,1513207921.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:02.321Z,1513207922.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:02.687Z,1513207922.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:03.080Z,1513207923.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:03.487Z,1513207923.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:03.895Z,1513207923.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:04.332Z,1513207924.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:04.699Z,1513207924.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:05.102Z,1513207925.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:05.511Z,1513207925.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:05.885Z,1513207925.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:06.290Z,1513207926.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:06.691Z,1513207926.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:07.090Z,1513207927.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:07.502Z,1513207927.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:07.907Z,1513207927.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:08.306Z,1513207928.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:11.955Z,1513207931.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:12.074Z,1513207932.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:12.484Z,1513207932.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:12.954Z,1513207932.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:13.291Z,1513207933.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:13.674Z,1513207933.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:14.078Z,1513207934.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:14.478Z,1513207934.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:14.888Z,1513207934.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:15.302Z,1513207935.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:15.741Z,1513207935.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:16.103Z,1513207936.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:16.479Z,1513207936.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:16.860Z,1513207936.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:17.304Z,1513207937.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:17.677Z,1513207937.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:18.114Z,1513207938.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:18.509Z,1513207938.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:18.874Z,1513207938.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:19.271Z,1513207939.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:19.671Z,1513207939.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:20.061Z,1513207940.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:20.467Z,1513207940.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:20.861Z,1513207940.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:21.319Z,1513207941.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:21.691Z,1513207941.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:22.074Z,1513207942.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:22.459Z,1513207942.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:22.868Z,1513207942.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:23.338Z,1513207943.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:23.658Z,1513207943.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:24.063Z,1513207944.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:24.484Z,1513207944.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:24.987Z,1513207944.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:25.275Z,1513207945.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:25.671Z,1513207945.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:26.124Z,1513207946.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:26.460Z,1513207946.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:26.862Z,1513207946.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:27.275Z,1513207947.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:27.681Z,1513207947.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:28.083Z,1513207948.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:28.462Z,1513207948.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:28.912Z,1513207948.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:29.267Z,1513207949.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:29.672Z,1513207949.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:30.068Z,1513207950.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:30.482Z,1513207950.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:30.949Z,1513207950.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:31.338Z,1513207951.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:31.660Z,1513207951.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:32.057Z,1513207952.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:32.462Z,1513207952.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:32.861Z,1513207952.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:33.283Z,1513207953.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:33.681Z,1513207953.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:34.069Z,1513207954.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:34.503Z,1513207954.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:34.864Z,1513207954.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:35.326Z,1513207955.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:35.656Z,1513207955.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:36.063Z,1513207956.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:36.485Z,1513207956.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:36.891Z,1513207956.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:37.325Z,1513207957.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:37.759Z,1513207957.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:38.095Z,1513207958.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:38.469Z,1513207958.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:38.940Z,1513207958.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:39.275Z,1513207959.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:39.726Z,1513207959.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:40.079Z,1513207960.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:40.479Z,1513207960.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:40.852Z,1513207960.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:41.267Z,1513207961.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:41.663Z,1513207961.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:42.067Z,1513207962.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:42.475Z,1513207962.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:42.954Z,1513207962.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:43.288Z,1513207963.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:43.668Z,1513207963.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:44.079Z,1513207964.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:44.489Z,1513207964.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:44.870Z,1513207964.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:45.262Z,1513207965.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:45.664Z,1513207965.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:46.091Z,1513207966.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:46.458Z,1513207966.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:46.863Z,1513207966.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:47.316Z,1513207967.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:47.666Z,1513207967.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:48.098Z,1513207968.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:48.471Z,1513207968.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:48.878Z,1513207968.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:49.363Z,1513207969.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:49.695Z,1513207969.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:50.119Z,1513207970.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:50.553Z,1513207970.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:50.868Z,1513207970.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:51.372Z,1513207971.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:51.672Z,1513207971.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:52.072Z,1513207972.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:52.465Z,1513207972.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:52.864Z,1513207972.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:53.270Z,1513207973.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:53.670Z,1513207973.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:54.058Z,1513207974.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:54.502Z,1513207974.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:54.863Z,1513207974.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:55.271Z,1513207975.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:55.659Z,1513207975.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:56.067Z,1513207976.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:56.460Z,1513207976.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:56.962Z,1513207976.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:57.287Z,1513207977.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:57.675Z,1513207977.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:58.087Z,1513207978.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:58.466Z,1513207978.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:58.864Z,1513207978.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:59.279Z,1513207979.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:32:59.673Z,1513207979.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:00.111Z,1513207980.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:00.490Z,1513207980.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:00.911Z,1513207980.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:01.280Z,1513207981.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:01.707Z,1513207981.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:02.066Z,1513207982.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:02.464Z,1513207982.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:02.866Z,1513207982.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:03.366Z,1513207983.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:03.686Z,1513207983.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:04.073Z,1513207984.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:04.466Z,1513207984.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:04.864Z,1513207984.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:05.356Z,1513207985.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:05.667Z,1513207985.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:06.062Z,1513207986.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:06.478Z,1513207986.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:06.919Z,1513207986.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:07.257Z,1513207987.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:07.658Z,1513207987.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:08.059Z,1513207988.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:08.463Z,1513207988.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:12.090Z,1513207992.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:12.235Z,1513207992.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:12.590Z,1513207992.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:13.037Z,1513207993.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:13.371Z,1513207993.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:13.771Z,1513207993.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:14.163Z,1513207994.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:14.568Z,1513207994.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:15.063Z,1513207995.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:15.396Z,1513207995.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:15.765Z,1513207995.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:16.212Z,1513207996.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:16.571Z,1513207996.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:16.960Z,1513207996.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:17.391Z,1513207997.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:17.771Z,1513207997.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:18.175Z,1513207998.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:18.568Z,1513207998.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:18.966Z,1513207998.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:19.447Z,1513207999.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:19.779Z,1513207999.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:20.175Z,1513208000.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:20.583Z,1513208000.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:21.010Z,1513208001.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:21.370Z,1513208001.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:21.769Z,1513208001.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:22.174Z,1513208002.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:22.628Z,1513208002.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:23.012Z,1513208003.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:23.372Z,1513208003.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:23.771Z,1513208003.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:24.211Z,1513208004.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:24.591Z,1513208004.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:25.014Z,1513208005.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:25.387Z,1513208005.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:25.803Z,1513208005.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:26.227Z,1513208006.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:26.579Z,1513208006.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:27.060Z,1513208007.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:27.379Z,1513208007.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:27.787Z,1513208007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:28.166Z,1513208008.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:28.592Z,1513208008.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:29.087Z,1513208009.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:29.403Z,1513208009.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:29.759Z,1513208009.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:30.163Z,1513208010.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:30.560Z,1513208010.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:30.963Z,1513208010.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:31.399Z,1513208011.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:31.790Z,1513208011.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:32.263Z,1513208012.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:32.561Z,1513208012.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:32.000Z,1513208013.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:33.390Z,1513208013.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:33.771Z,1513208013.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:34.167Z,1513208014.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:34.575Z,1513208014.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:35.015Z,1513208015.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:35.471Z,1513208015.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:35.770Z,1513208015.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:36.248Z,1513208016.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:36.570Z,1513208016.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:37.004Z,1513208017.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:37.391Z,1513208017.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:37.768Z,1513208017.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:38.286Z,1513208018.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:38.586Z,1513208018.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:39.008Z,1513208019.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:39.367Z,1513208019.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:39.770Z,1513208019.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:40.175Z,1513208020.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:40.577Z,1513208020.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:41.015Z,1513208021.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:41.382Z,1513208021.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:41.804Z,1513208021.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:42.170Z,1513208022.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:42.567Z,1513208022.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:43.018Z,1513208023.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:43.387Z,1513208023.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:43.791Z,1513208023.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:44.195Z,1513208024.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:44.561Z,1513208024.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:44.959Z,1513208024.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:45.363Z,1513208025.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:45.766Z,1513208025.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:46.172Z,1513208026.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:46.580Z,1513208026.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:46.975Z,1513208026.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:47.472Z,1513208027.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:47.764Z,1513208027.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:48.208Z,1513208028.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:48.607Z,1513208028.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:49.001Z,1513208029.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:49.407Z,1513208029.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:49.783Z,1513208029.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:50.177Z,1513208030.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:50.569Z,1513208030.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:51.004Z,1513208031.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:51.366Z,1513208031.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:51.771Z,1513208031.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:52.166Z,1513208032.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:52.582Z,1513208032.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:53.019Z,1513208033.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:53.379Z,1513208033.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:53.768Z,1513208033.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:54.175Z,1513208034.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:54.567Z,1513208034.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:55.019Z,1513208035.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:55.376Z,1513208035.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:55.777Z,1513208035.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:56.178Z,1513208036.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:56.564Z,1513208036.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:57.027Z,1513208037.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:57.379Z,1513208037.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:57.831Z,1513208037.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:58.159Z,1513208038.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:58.583Z,1513208038.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:58.999Z,1513208038.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:59.388Z,1513208039.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:33:59.833Z,1513208039.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:00.168Z,1513208040.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:00.574Z,1513208040.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:01.028Z,1513208041.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:01.403Z,1513208041.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:01.773Z,1513208041.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:02.179Z,1513208042.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:02.570Z,1513208042.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:03.016Z,1513208043.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:03.379Z,1513208043.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-12-13T23:34:03.770Z,1513208043.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan,