2016-11-09T00:39:36.484Z,1478651976.484 [Supervisor](DEBUG): Initializing supervisor.
2016-11-09T00:39:36.486Z,1478651976.487 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2016-11-09T00:39:36.487Z,1478651976.487 [SyncHandler](INFO): Protected caller Thread ID is 1365
2016-11-09T00:39:36.488Z,1478651976.488 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2016-11-09T00:39:36.489Z,1478651976.489 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2016-11-09T00:39:36.489Z,1478651976.489 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 1366
2016-11-09T00:39:36.492Z,1478651976.492 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2016-11-09T00:39:36.504Z,1478651976.504 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2016-11-09T00:39:36.506Z,1478651976.506 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2016-11-09T00:39:36.506Z,1478651976.506 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 1367
2016-11-09T00:39:36.507Z,1478651976.507 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2016-11-09T00:39:36.508Z,1478651976.508 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2016-11-09T00:39:36.508Z,1478651976.508 [logger ThreadHandler](INFO): Protected caller Thread ID is 1368
2016-11-09T00:39:36.510Z,1478651976.510 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2016-11-09T00:39:36.511Z,1478651976.511 [Supervisor](INFO): Looking for Config files in directory: Config/
2016-11-09T00:39:36.512Z,1478651976.512 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2016-11-09T00:39:36.717Z,1478651976.717 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2016-11-09T00:39:36.718Z,1478651976.718 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2016-11-09T00:39:36.849Z,1478651976.849 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2016-11-09T00:39:36.849Z,1478651976.849 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2016-11-09T00:39:37.219Z,1478651977.218 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2016-11-09T00:39:37.219Z,1478651977.219 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2016-11-09T00:39:37.358Z,1478651977.358 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2016-11-09T00:39:37.358Z,1478651977.358 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2016-11-09T00:39:37.445Z,1478651977.445 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2016-11-09T00:39:37.662Z,1478651977.662 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2016-11-09T00:39:37.662Z,1478651977.662 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2016-11-09T00:39:37.751Z,1478651977.751 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2016-11-09T00:39:37.752Z,1478651977.752 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2016-11-09T00:39:38.053Z,1478651978.053 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2016-11-09T00:39:38.053Z,1478651978.053 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2016-11-09T00:39:38.446Z,1478651978.446 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2016-11-09T00:39:38.447Z,1478651978.447 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2016-11-09T00:39:38.791Z,1478651978.791 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2016-11-09T00:39:38.791Z,1478651978.792 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2016-11-09T00:39:39.357Z,1478651979.357 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2016-11-09T00:39:39.357Z,1478651979.358 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2016-11-09T00:39:39.576Z,1478651979.576 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2016-11-09T00:39:39.577Z,1478651979.577 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2016-11-09T00:39:39.706Z,1478651979.706 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2016-11-09T00:39:39.706Z,1478651979.707 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2016-11-09T00:39:40.200Z,1478651980.200 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2016-11-09T00:39:40.200Z,1478651980.200 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2016-11-09T00:39:40.318Z,1478651980.318 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2016-11-09T00:39:40.320Z,1478651980.320 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2016-11-09T00:39:40.321Z,1478651980.321 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2016-11-09T00:39:40.609Z,1478651980.609 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2016-11-09T00:39:40.609Z,1478651980.609 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2016-11-09T00:39:40.716Z,1478651980.717 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2016-11-09T00:39:40.829Z,1478651980.829 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2016-11-09T00:39:40.934Z,1478651980.934 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2016-11-09T00:39:41.027Z,1478651981.027 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2016-11-09T00:39:41.185Z,1478651981.185 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2016-11-09T00:39:41.386Z,1478651981.386 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2016-11-09T00:39:41.503Z,1478651981.503 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2016-11-09T00:39:41.607Z,1478651981.607 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2016-11-09T00:39:41.697Z,1478651981.697 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2016-11-09T00:39:41.882Z,1478651981.882 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2016-11-09T00:39:41.888Z,1478651981.888 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2016-11-09T00:39:42.022Z,1478651982.022 [SBIT](DEBUG): Construct Startup Built In Test.
2016-11-09T00:39:42.057Z,1478651982.057 [SBIT] Loaded
2016-11-09T00:39:42.057Z,1478651982.057 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2016-11-09T00:39:42.058Z,1478651982.058 [IBIT](DEBUG): Construct Initiated Built In Test.
2016-11-09T00:39:42.089Z,1478651982.089 [IBIT] Loaded
2016-11-09T00:39:42.090Z,1478651982.090 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2016-11-09T00:39:42.094Z,1478651982.093 [CBIT](DEBUG): Construct Continuous Built In Test.
2016-11-09T00:39:42.307Z,1478651982.307 [CBIT] Loaded
2016-11-09T00:39:42.307Z,1478651982.307 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2016-11-09T00:39:42.308Z,1478651982.307 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2016-11-09T00:39:42.308Z,1478651982.308 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2016-11-09T00:39:42.360Z,1478651982.360 [VerticalControl](DEBUG): Construct VerticalControl.
2016-11-09T00:39:42.474Z,1478651982.474 [VerticalControl] Loaded
2016-11-09T00:39:42.474Z,1478651982.474 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2016-11-09T00:39:42.475Z,1478651982.474 [HorizontalControl](DEBUG): Construct HorizontalControl.
2016-11-09T00:39:42.544Z,1478651982.543 [HorizontalControl] Loaded
2016-11-09T00:39:42.544Z,1478651982.544 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2016-11-09T00:39:42.544Z,1478651982.544 [SpeedControl](DEBUG): Construct SpeedControl.
2016-11-09T00:39:42.551Z,1478651982.551 [SpeedControl] Loaded
2016-11-09T00:39:42.551Z,1478651982.551 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2016-11-09T00:39:42.552Z,1478651982.552 [LoopControl](DEBUG): Construct LoopControl.
2016-11-09T00:39:42.552Z,1478651982.552 [LoopControl] Loaded
2016-11-09T00:39:42.553Z,1478651982.553 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2016-11-09T00:39:42.553Z,1478651982.553 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2016-11-09T00:39:42.554Z,1478651982.554 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2016-11-09T00:39:42.578Z,1478651982.579 [DepthRateCalculator] Loaded
2016-11-09T00:39:42.579Z,1478651982.579 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2016-11-09T00:39:42.585Z,1478651982.585 [PitchRateCalculator] Loaded
2016-11-09T00:39:42.585Z,1478651982.585 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2016-11-09T00:39:42.597Z,1478651982.597 [SpeedCalculator] Loaded
2016-11-09T00:39:42.598Z,1478651982.598 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2016-11-09T00:39:42.616Z,1478651982.616 [TempGradientCalculator] Loaded
2016-11-09T00:39:42.616Z,1478651982.616 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2016-11-09T00:39:42.634Z,1478651982.634 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2016-11-09T00:39:42.635Z,1478651982.635 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2016-11-09T00:39:42.640Z,1478651982.640 [YawRateCalculator] Loaded
2016-11-09T00:39:42.641Z,1478651982.641 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2016-11-09T00:39:42.641Z,1478651982.641 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2016-11-09T00:39:42.642Z,1478651982.642 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2016-11-09T00:39:42.722Z,1478651982.722 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2016-11-09T00:39:42.722Z,1478651982.722 [StratificationFrontDetector](DEBUG): (re)initializing
2016-11-09T00:39:42.723Z,1478651982.723 [StratificationFrontDetector] Loaded
2016-11-09T00:39:42.723Z,1478651982.723 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2016-11-09T00:39:42.724Z,1478651982.724 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2016-11-09T00:39:42.724Z,1478651982.724 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2016-11-09T00:39:42.970Z,1478651982.970 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2016-11-09T00:39:42.971Z,1478651982.971 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2016-11-09T00:39:43.089Z,1478651983.089 [DeadReckonUsingMultipleVelocitySources] Loaded
2016-11-09T00:39:43.089Z,1478651983.089 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2016-11-09T00:39:43.176Z,1478651983.176 [DeadReckonUsingSpeedCalculator] Loaded
2016-11-09T00:39:43.176Z,1478651983.176 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2016-11-09T00:39:43.262Z,1478651983.262 [DeadReckonWithRespectToWater] Loaded
2016-11-09T00:39:43.262Z,1478651983.262 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2016-11-09T00:39:43.344Z,1478651983.344 [DeadReckonWithRespectToSeafloor] Loaded
2016-11-09T00:39:43.345Z,1478651983.345 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2016-11-09T00:39:43.411Z,1478651983.411 [DeadReckonUsingDVLWaterTrack] Loaded
2016-11-09T00:39:43.411Z,1478651983.411 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2016-11-09T00:39:43.430Z,1478651983.430 [NavChart] Loaded
2016-11-09T00:39:43.430Z,1478651983.430 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2016-11-09T00:39:43.435Z,1478651983.435 [UniversalFixResidualReporter] Loaded
2016-11-09T00:39:43.435Z,1478651983.435 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2016-11-09T00:39:43.436Z,1478651983.436 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2016-11-09T00:39:43.436Z,1478651983.436 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2016-11-09T00:39:43.443Z,1478651983.443 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2016-11-09T00:39:43.443Z,1478651983.443 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2016-11-09T00:39:43.549Z,1478651983.549 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2016-11-09T00:39:43.550Z,1478651983.550 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2016-11-09T00:39:43.831Z,1478651983.831 [DataOverHttps] Loaded
2016-11-09T00:39:43.831Z,1478651983.832 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2016-11-09T00:39:43.860Z,1478651983.860 [Depth_Keller] Loaded
2016-11-09T00:39:43.860Z,1478651983.860 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2016-11-09T00:39:43.866Z,1478651983.866 [DropWeight] Loaded
2016-11-09T00:39:43.866Z,1478651983.866 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2016-11-09T00:39:43.970Z,1478651983.970 [NAL9602] Loaded
2016-11-09T00:39:43.971Z,1478651983.971 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2016-11-09T00:39:43.981Z,1478651983.981 [Onboard] Loaded
2016-11-09T00:39:43.981Z,1478651983.981 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2016-11-09T00:39:43.989Z,1478651983.989 [Radio_Surface] Loaded
2016-11-09T00:39:43.990Z,1478651983.990 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2016-11-09T00:39:43.991Z,1478651983.991 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4098A4E0
2016-11-09T00:39:43.991Z,1478651983.991 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1447
2016-11-09T00:39:44.045Z,1478651984.045 [PNI_TCM] Loaded
2016-11-09T00:39:44.045Z,1478651984.045 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2016-11-09T00:39:44.121Z,1478651984.121 [Rowe_600LCM] Loaded
2016-11-09T00:39:44.121Z,1478651984.121 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2016-11-09T00:39:44.122Z,1478651984.122 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 409BA4E0
2016-11-09T00:39:44.123Z,1478651984.122 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 1448
2016-11-09T00:39:46.276Z,1478651986.276 [BPC1] Loaded
2016-11-09T00:39:46.276Z,1478651986.276 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2016-11-09T00:39:46.277Z,1478651986.277 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2016-11-09T00:39:46.277Z,1478651986.277 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2016-11-09T00:39:46.384Z,1478651986.384 [BuoyancyServo] Loaded
2016-11-09T00:39:46.385Z,1478651986.385 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2016-11-09T00:39:46.399Z,1478651986.399 [ElevatorServo] Loaded
2016-11-09T00:39:46.399Z,1478651986.399 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2016-11-09T00:39:46.412Z,1478651986.412 [MassServo] Loaded
2016-11-09T00:39:46.412Z,1478651986.412 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2016-11-09T00:39:46.426Z,1478651986.426 [RudderServo] Loaded
2016-11-09T00:39:46.426Z,1478651986.426 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2016-11-09T00:39:46.438Z,1478651986.438 [ThrusterServo] Loaded
2016-11-09T00:39:46.439Z,1478651986.439 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2016-11-09T00:39:46.439Z,1478651986.439 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2016-11-09T00:39:46.440Z,1478651986.440 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2016-11-09T00:39:46.590Z,1478651986.590 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2016-11-09T00:39:46.591Z,1478651986.591 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2016-11-09T00:39:46.617Z,1478651986.617 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2016-11-09T00:39:46.621Z,1478651986.621 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2016-11-09T00:39:46.622Z,1478651986.622 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2016-11-09T00:39:46.629Z,1478651986.629 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2016-11-09T00:39:46.630Z,1478651986.630 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A684E0
2016-11-09T00:39:46.630Z,1478651986.630 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1449
2016-11-09T00:39:46.635Z,1478651986.635 [Supervisor](INFO): Main Thread ID is 762
2016-11-09T00:39:46.636Z,1478651986.635 [Supervisor](DEBUG): Running supervisor.
2016-11-09T00:39:46.636Z,1478651986.636 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1450
2016-11-09T00:39:46.639Z,1478651986.639 [controlThread ThreadHandler](INFO): Handler Thread ID is 1451
2016-11-09T00:39:46.640Z,1478651986.639 [controlThread](DEBUG): Initializing ControlThread
2016-11-09T00:39:46.641Z,1478651986.641 [SBIT](INFO): Initialize SBIT Component.
2016-11-09T00:39:46.641Z,1478651986.641 [SBIT](IMPORTANT): git: 2016-06-23-49-g7a7cb15
2016-11-09T00:39:46.641Z,1478651986.641 [SBIT](INFO): git hash: 7a7cb1535d617db5219abc778a5c7c082fdfbef2
2016-11-09T00:39:46.643Z,1478651986.643 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2016-11-09T00:39:46.643Z,1478651986.644 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2016-11-09T00:39:46.645Z,1478651986.645 [SBIT](INFO): Beginning SBIT in 49.000000 seconds.
2016-11-09T00:39:46.645Z,1478651986.645 [IBIT](INFO): Initialize IBIT Component.
2016-11-09T00:39:46.646Z,1478651986.646 [CBIT](DEBUG): Initialize CBIT Component.
2016-11-09T00:39:46.646Z,1478651986.646 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2016-11-09T00:39:46.647Z,1478651986.647 [logger ThreadHandler](INFO): Handler Thread ID is 1452
2016-11-09T00:39:46.676Z,1478651986.676 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1453
2016-11-09T00:39:46.683Z,1478651986.683 [Radio_Surface](INFO): Powering up
2016-11-09T00:39:46.688Z,1478651986.688 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 1454
2016-11-09T00:39:46.688Z,1478651986.688 [Rowe_600LCM](INFO): Initializing
2016-11-09T00:39:46.689Z,1478651986.689 [Rowe_600LCM](INFO): Checking LCM
2016-11-09T00:39:46.689Z,1478651986.689 [Rowe_600LCM](INFO): LCM OK
2016-11-09T00:39:46.689Z,1478651986.690 [Rowe_600LCM](INFO): Powering up
2016-11-09T00:39:46.696Z,1478651986.696 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1455
2016-11-09T00:39:46.699Z,1478651986.699 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2016-11-09T00:39:46.699Z,1478651986.699 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2016-11-09T00:39:46.700Z,1478651986.700 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2016-11-09T00:39:46.700Z,1478651986.700 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2016-11-09T00:39:46.700Z,1478651986.700 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2016-11-09T00:39:46.700Z,1478651986.700 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2016-11-09T00:39:46.700Z,1478651986.700 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2016-11-09T00:39:46.701Z,1478651986.701 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2016-11-09T00:39:46.702Z,1478651986.702 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2016-11-09T00:39:46.702Z,1478651986.702 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2016-11-09T00:39:46.702Z,1478651986.702 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2016-11-09T00:39:46.728Z,1478651986.727 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2016-11-09T00:39:46.729Z,1478651986.729 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2016-11-09T00:39:46.730Z,1478651986.730 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2016-11-09T00:39:46.731Z,1478651986.731 [LoopControl](DEBUG): Initialize LoopControlComponent.
2016-11-09T00:39:46.731Z,1478651986.731 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2016-11-09T00:39:46.731Z,1478651986.731 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2016-11-09T00:39:46.732Z,1478651986.732 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2016-11-09T00:39:46.732Z,1478651986.732 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2016-11-09T00:39:46.733Z,1478651986.733 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2016-11-09T00:39:46.733Z,1478651986.733 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2016-11-09T00:39:46.734Z,1478651986.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-09T00:39:46.735Z,1478651986.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:39:46.735Z,1478651986.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:39:46.736Z,1478651986.736 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-09T00:39:46.736Z,1478651986.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:39:46.737Z,1478651986.737 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:39:46.737Z,1478651986.737 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-09T00:39:46.738Z,1478651986.737 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:39:46.738Z,1478651986.738 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:39:46.738Z,1478651986.738 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:39:46.739Z,1478651986.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:39:46.739Z,1478651986.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:39:46.739Z,1478651986.740 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:39:46.740Z,1478651986.740 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:39:46.740Z,1478651986.740 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:39:46.741Z,1478651986.741 [NavChart](DEBUG): Initialize NavChart Navigation.
2016-11-09T00:39:46.741Z,1478651986.741 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2016-11-09T00:39:46.748Z,1478651986.748 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2016-11-09T00:39:46.763Z,1478651986.763 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2016-11-09T00:39:46.802Z,1478651986.802 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2016-11-09T00:39:46.803Z,1478651986.803 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2016-11-09T00:39:46.880Z,1478651986.880 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2016-11-09T00:39:46.881Z,1478651986.881 [Default:A.Wait](DEBUG): Construct Wait.
2016-11-09T00:39:46.883Z,1478651986.883 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2016-11-09T00:39:46.925Z,1478651986.925 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2016-11-09T00:39:46.928Z,1478651986.928 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2016-11-09T00:39:46.946Z,1478651986.946 [Default:E.Execute](DEBUG): Construct Execute.
2016-11-09T00:39:46.950Z,1478651986.950 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2016-11-09T00:39:46.960Z,1478651986.960 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2016-11-09T00:39:47.281Z,1478651987.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.281Z,1478651987.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:47.284Z,1478651987.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:47.310Z,1478651987.310 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.333Z,1478651987.333 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.378Z,1478651987.378 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.400Z,1478651987.399 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.512Z,1478651987.512 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:47.520Z,1478651987.520 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-11-09T00:39:47.526Z,1478651987.526 [ElevatorServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:47.532Z,1478651987.532 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2016-11-09T00:39:47.538Z,1478651987.538 [MassServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:47.544Z,1478651987.544 [MassServo](DEBUG): Initializing MassServo.
2016-11-09T00:39:47.549Z,1478651987.549 [RudderServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:47.556Z,1478651987.556 [RudderServo](DEBUG): Initializing RudderServo.
2016-11-09T00:39:47.561Z,1478651987.561 [ThrusterServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:47.568Z,1478651987.568 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2016-11-09T00:39:47.893Z,1478651987.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.893Z,1478651987.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:47.894Z,1478651987.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:47.895Z,1478651987.895 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.904Z,1478651987.904 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.905Z,1478651987.905 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:47.906Z,1478651987.906 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.077Z,1478651988.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.077Z,1478651988.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:48.078Z,1478651988.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:48.079Z,1478651988.079 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.091Z,1478651988.092 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.092Z,1478651988.092 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.093Z,1478651988.093 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.431Z,1478651988.431 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2016-11-09T00:39:48.432Z,1478651988.432 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2016-11-09T00:39:48.432Z,1478651988.432 [BuoyancyServo] Communications Fault, FailCount= 1
2016-11-09T00:39:48.432Z,1478651988.432 [BuoyancyServo](ERROR): Communications Fault
2016-11-09T00:39:48.643Z,1478651988.643 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2016-11-09T00:39:48.691Z,1478651988.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.691Z,1478651988.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:48.692Z,1478651988.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:48.700Z,1478651988.700 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.701Z,1478651988.701 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.702Z,1478651988.702 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.703Z,1478651988.703 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:48.725Z,1478651988.725 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2016-11-09T00:39:48.726Z,1478651988.726 [BuoyancyServo](INFO): Powering down
2016-11-09T00:39:49.057Z,1478651989.057 [NAL9602](INFO): Powering up NAL9602
2016-11-09T00:39:49.096Z,1478651989.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.096Z,1478651989.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:49.097Z,1478651989.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:49.098Z,1478651989.098 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.099Z,1478651989.099 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.100Z,1478651989.100 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.102Z,1478651989.102 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.483Z,1478651989.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.483Z,1478651989.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:49.484Z,1478651989.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:49.485Z,1478651989.485 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.486Z,1478651989.486 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.487Z,1478651989.487 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.496Z,1478651989.496 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.879Z,1478651989.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.879Z,1478651989.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:49.880Z,1478651989.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:49.881Z,1478651989.881 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.882Z,1478651989.882 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.883Z,1478651989.883 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:49.884Z,1478651989.884 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.294Z,1478651990.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.294Z,1478651990.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:50.295Z,1478651990.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:50.296Z,1478651990.296 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.297Z,1478651990.297 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.298Z,1478651990.297 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.298Z,1478651990.298 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2016-11-09T00:39:50.716Z,1478651990.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:50.717Z,1478651990.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:50.818Z,1478651990.818 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2016-11-09T00:39:50.818Z,1478651990.818 [BuoyancyServo] No Fault, FailCount= 1
2016-11-09T00:39:50.972Z,1478651990.972 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-09T00:39:51.098Z,1478651991.098 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-09T00:39:51.130Z,1478651991.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:51.131Z,1478651991.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:51.166Z,1478651991.166 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-09T00:39:51.167Z,1478651991.167 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-09T00:39:51.184Z,1478651991.184 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-09T00:39:51.208Z,1478651991.208 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2016-11-09T00:39:51.209Z,1478651991.209 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2016-11-09T00:39:51.549Z,1478651991.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2016-11-09T00:39:51.551Z,1478651991.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:51.906Z,1478651991.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:52.305Z,1478651992.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:52.747Z,1478651992.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:53.105Z,1478651993.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:53.505Z,1478651993.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:53.906Z,1478651993.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:54.298Z,1478651994.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:54.705Z,1478651994.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:55.110Z,1478651995.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:55.510Z,1478651995.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:55.933Z,1478651995.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:56.290Z,1478651996.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:56.706Z,1478651996.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:57.106Z,1478651997.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:57.511Z,1478651997.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:57.968Z,1478651997.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:58.329Z,1478651998.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:58.720Z,1478651998.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:59.109Z,1478651999.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:39:59.502Z,1478651999.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:00.002Z,1478652000.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:00.261Z,1478652000.261 [NAL9602](INFO): NAL9602 initialized
2016-11-09T00:40:00.318Z,1478652000.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:00.733Z,1478652000.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:01.118Z,1478652001.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:01.534Z,1478652001.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:01.953Z,1478652001.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:02.319Z,1478652002.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:02.701Z,1478652002.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:03.124Z,1478652003.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:03.526Z,1478652003.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:03.922Z,1478652003.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:04.309Z,1478652004.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:04.728Z,1478652004.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:05.114Z,1478652005.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:05.527Z,1478652005.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:05.896Z,1478652005.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:06.306Z,1478652006.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:06.719Z,1478652006.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:07.108Z,1478652007.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:07.499Z,1478652007.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:07.916Z,1478652007.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:08.345Z,1478652008.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:08.743Z,1478652008.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:09.137Z,1478652009.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:09.498Z,1478652009.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:09.923Z,1478652009.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:10.363Z,1478652010.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:10.728Z,1478652010.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:11.128Z,1478652011.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:11.504Z,1478652011.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:11.915Z,1478652011.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:12.349Z,1478652012.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:12.793Z,1478652012.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:13.133Z,1478652013.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:13.549Z,1478652013.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:13.957Z,1478652013.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:14.308Z,1478652014.308 [PNI_TCM](ERROR): CRC does not match. Expected:0x45917 got:0x16824
2016-11-09T00:40:14.361Z,1478652014.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:14.746Z,1478652014.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:15.170Z,1478652015.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:15.529Z,1478652015.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:15.909Z,1478652015.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:16.329Z,1478652016.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:16.783Z,1478652016.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:17.122Z,1478652017.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:17.504Z,1478652017.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:17.953Z,1478652017.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:18.307Z,1478652018.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:18.784Z,1478652018.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:19.106Z,1478652019.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:19.518Z,1478652019.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:19.921Z,1478652019.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:20.323Z,1478652020.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:20.741Z,1478652020.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:21.141Z,1478652021.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:21.532Z,1478652021.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:21.933Z,1478652021.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:22.327Z,1478652022.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:22.758Z,1478652022.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:23.117Z,1478652023.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:23.521Z,1478652023.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:23.929Z,1478652023.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:24.333Z,1478652024.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:24.748Z,1478652024.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:25.118Z,1478652025.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:25.523Z,1478652025.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:25.931Z,1478652025.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:26.328Z,1478652026.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:26.756Z,1478652026.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:27.119Z,1478652027.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:27.510Z,1478652027.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:27.920Z,1478652027.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:28.314Z,1478652028.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:28.810Z,1478652028.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:29.118Z,1478652029.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:29.541Z,1478652029.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:29.940Z,1478652029.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:30.369Z,1478652030.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:30.770Z,1478652030.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:31.120Z,1478652031.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:31.526Z,1478652031.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:31.936Z,1478652031.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:32.325Z,1478652032.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:32.705Z,1478652032.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:33.139Z,1478652033.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:33.530Z,1478652033.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:33.928Z,1478652033.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:34.326Z,1478652034.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:34.746Z,1478652034.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:35.109Z,1478652035.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:35.534Z,1478652035.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:35.909Z,1478652035.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:36.302Z,1478652036.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:36.351Z,1478652036.351 [SBIT](IMPORTANT): Beginning Startup BIT
2016-11-09T00:40:36.364Z,1478652036.364 [CBIT](IMPORTANT): Beginning ground fault scan
2016-11-09T00:40:36.725Z,1478652036.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:37.116Z,1478652037.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:37.513Z,1478652037.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:37.915Z,1478652037.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:38.298Z,1478652038.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:38.893Z,1478652038.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:39.266Z,1478652039.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:39.665Z,1478652039.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:40.065Z,1478652040.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:40.468Z,1478652040.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:40.869Z,1478652040.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:41.254Z,1478652041.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:41.646Z,1478652041.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:42.059Z,1478652042.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:42.453Z,1478652042.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:42.934Z,1478652042.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:43.317Z,1478652043.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:43.725Z,1478652043.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:44.111Z,1478652044.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:44.530Z,1478652044.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:44.968Z,1478652044.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:45.317Z,1478652045.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:45.692Z,1478652045.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:46.101Z,1478652046.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:46.509Z,1478652046.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:46.898Z,1478652046.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:47.068Z,1478652047.068 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.001258
CHAN A1 (24V): -0.000430
CHAN A2 (12V): 0.005191
CHAN A3 (5V): 0.001933
CHAN B0 (3.3V): 0.000441
CHAN B1 (3.15aV): 0.000899
CHAN B2 (3.15bV): -0.000666
CHAN B3 (GND): -0.002396
OPEN: 0.006116
Full Scale Calc: 4.765 mA, -1.589 mA
2016-11-09T00:40:47.282Z,1478652047.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:47.682Z,1478652047.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:48.090Z,1478652048.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:48.489Z,1478652048.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:48.894Z,1478652048.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:49.332Z,1478652049.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:49.725Z,1478652049.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:50.125Z,1478652050.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:50.504Z,1478652050.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:50.933Z,1478652050.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:51.297Z,1478652051.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:51.878Z,1478652051.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:52.266Z,1478652052.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:52.722Z,1478652052.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:53.065Z,1478652053.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:53.428Z,1478652053.428 [PNI_TCM](ERROR): CRC does not match. Expected:0x53535 got:0x60184
2016-11-09T00:40:53.469Z,1478652053.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:53.862Z,1478652053.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:54.257Z,1478652054.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:54.697Z,1478652054.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:55.069Z,1478652055.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:55.493Z,1478652055.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:55.869Z,1478652055.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:56.270Z,1478652056.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:56.768Z,1478652056.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:57.072Z,1478652057.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:57.474Z,1478652057.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:57.854Z,1478652057.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:58.253Z,1478652058.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:58.694Z,1478652058.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:59.045Z,1478652059.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:59.445Z,1478652059.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:40:59.851Z,1478652059.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:00.254Z,1478652060.254 [BPC1](ERROR): Failed to receive battery data
2016-11-09T00:41:00.254Z,1478652060.254 [BPC1] Communications Fault, FailCount= 1
2016-11-09T00:41:00.254Z,1478652060.254 [BPC1](ERROR): Communications Fault
2016-11-09T00:41:00.262Z,1478652060.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:00.318Z,1478652060.318 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T00:41:00.704Z,1478652060.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:01.059Z,1478652061.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:01.449Z,1478652061.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:01.525Z,1478652061.525 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:41:01.525Z,1478652061.525 [BPC1] No Fault, FailCount= 1
2016-11-09T00:41:01.917Z,1478652061.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:02.249Z,1478652062.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:02.682Z,1478652062.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:03.042Z,1478652063.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:03.445Z,1478652063.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:03.846Z,1478652063.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:04.244Z,1478652064.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:04.677Z,1478652064.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:05.061Z,1478652065.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:05.486Z,1478652065.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:05.856Z,1478652065.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:06.257Z,1478652066.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:06.686Z,1478652066.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:07.052Z,1478652067.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:07.446Z,1478652067.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:07.845Z,1478652067.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:08.244Z,1478652068.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:08.695Z,1478652068.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:09.043Z,1478652069.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:09.442Z,1478652069.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:09.846Z,1478652069.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:10.259Z,1478652070.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:10.660Z,1478652070.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:11.060Z,1478652071.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:11.456Z,1478652071.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:11.851Z,1478652071.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:12.249Z,1478652072.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:12.662Z,1478652072.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:13.049Z,1478652073.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:13.453Z,1478652073.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:13.847Z,1478652073.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:14.251Z,1478652074.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:14.655Z,1478652074.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:15.047Z,1478652075.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:15.458Z,1478652075.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:15.857Z,1478652075.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:16.243Z,1478652076.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:16.703Z,1478652076.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:17.045Z,1478652077.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:17.488Z,1478652077.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:17.848Z,1478652077.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:18.270Z,1478652078.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:18.865Z,1478652078.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:19.218Z,1478652079.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:19.622Z,1478652079.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:20.025Z,1478652080.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:20.426Z,1478652080.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:20.825Z,1478652080.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:21.220Z,1478652081.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:21.625Z,1478652081.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:22.021Z,1478652082.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:22.425Z,1478652082.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:22.825Z,1478652082.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:23.229Z,1478652083.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:23.628Z,1478652083.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:24.025Z,1478652084.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:24.431Z,1478652084.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:24.836Z,1478652084.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:25.223Z,1478652085.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:25.637Z,1478652085.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:26.026Z,1478652086.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:26.421Z,1478652086.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:26.831Z,1478652086.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:27.227Z,1478652087.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:27.625Z,1478652087.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:28.033Z,1478652088.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:28.430Z,1478652088.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:28.844Z,1478652088.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:29.238Z,1478652089.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:29.658Z,1478652089.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:30.034Z,1478652090.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:30.047Z,1478652090.047 [SBIT](IMPORTANT): SBIT PASSED
2016-11-09T00:41:30.426Z,1478652090.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:30.431Z,1478652090.431 [MissionManager](IMPORTANT): Started mission Startup
2016-11-09T00:41:30.432Z,1478652090.432 [Startup] Running Loop=1
2016-11-09T00:41:30.432Z,1478652090.432 [Startup](DEBUG): Aggregate::initialize Startup
2016-11-09T00:41:30.432Z,1478652090.432 [Startup:A.GoToSurface] Running Loop=1
2016-11-09T00:41:30.432Z,1478652090.432 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-11-09T00:41:30.433Z,1478652090.433 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-11-09T00:41:30.433Z,1478652090.433 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-11-09T00:41:30.433Z,1478652090.433 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-11-09T00:41:30.434Z,1478652090.434 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-11-09T00:41:30.434Z,1478652090.434 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-11-09T00:41:30.452Z,1478652090.452 [Startup:StartupSatComms] Running Loop=1
2016-11-09T00:41:30.453Z,1478652090.453 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2016-11-09T00:41:30.453Z,1478652090.453 [Startup:StartupSatComms:A] Running Loop=1
2016-11-09T00:41:30.870Z,1478652090.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:30.892Z,1478652090.892 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2016-11-09T00:41:31.242Z,1478652091.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:31.643Z,1478652091.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:32.062Z,1478652092.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:32.417Z,1478652092.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:32.870Z,1478652092.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:33.265Z,1478652093.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:33.646Z,1478652093.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:34.027Z,1478652094.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:34.428Z,1478652094.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:34.830Z,1478652094.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:35.225Z,1478652095.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:35.624Z,1478652095.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:36.023Z,1478652096.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:36.422Z,1478652096.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:36.830Z,1478652096.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:37.231Z,1478652097.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:37.629Z,1478652097.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:38.037Z,1478652098.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:38.435Z,1478652098.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:38.836Z,1478652098.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:39.237Z,1478652099.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:39.629Z,1478652099.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:40.033Z,1478652100.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:40.430Z,1478652100.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:40.829Z,1478652100.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:41.241Z,1478652101.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:41.623Z,1478652101.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:42.026Z,1478652102.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:42.434Z,1478652102.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:42.836Z,1478652102.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:43.237Z,1478652103.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:43.641Z,1478652103.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:44.078Z,1478652104.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:44.438Z,1478652104.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:44.833Z,1478652104.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:45.262Z,1478652105.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:45.614Z,1478652105.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:46.049Z,1478652106.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:46.414Z,1478652106.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:46.850Z,1478652106.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:47.237Z,1478652107.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:47.658Z,1478652107.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:48.025Z,1478652108.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:48.432Z,1478652108.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:48.836Z,1478652108.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:49.236Z,1478652109.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:49.636Z,1478652109.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:50.024Z,1478652110.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:50.431Z,1478652110.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:50.834Z,1478652110.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:51.224Z,1478652111.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:51.633Z,1478652111.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:52.034Z,1478652112.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:52.423Z,1478652112.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:52.830Z,1478652112.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:53.230Z,1478652113.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:53.638Z,1478652113.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:54.037Z,1478652114.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:54.453Z,1478652114.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:54.850Z,1478652114.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:55.245Z,1478652115.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:55.621Z,1478652115.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:56.021Z,1478652116.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:56.425Z,1478652116.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:56.829Z,1478652116.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:57.222Z,1478652117.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:57.629Z,1478652117.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:58.029Z,1478652118.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:58.454Z,1478652118.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:58.843Z,1478652118.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:59.238Z,1478652119.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:41:59.690Z,1478652119.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:00.040Z,1478652120.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:00.438Z,1478652120.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:00.865Z,1478652120.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:01.225Z,1478652121.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:01.652Z,1478652121.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:02.055Z,1478652122.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:02.425Z,1478652122.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:02.832Z,1478652122.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:03.222Z,1478652123.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:03.622Z,1478652123.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:04.041Z,1478652124.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:04.436Z,1478652124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:04.845Z,1478652124.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:05.246Z,1478652125.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:05.614Z,1478652125.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:06.021Z,1478652126.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:06.421Z,1478652126.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:06.835Z,1478652126.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:07.226Z,1478652127.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:07.621Z,1478652127.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:08.018Z,1478652128.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:08.432Z,1478652128.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:08.845Z,1478652128.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:09.246Z,1478652129.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:09.638Z,1478652129.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:10.048Z,1478652130.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:10.438Z,1478652130.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:10.830Z,1478652130.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:11.228Z,1478652131.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:11.623Z,1478652131.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:12.022Z,1478652132.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:12.449Z,1478652132.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:12.814Z,1478652132.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:13.239Z,1478652133.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:13.629Z,1478652133.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:14.034Z,1478652134.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:14.484Z,1478652134.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:14.854Z,1478652134.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:15.250Z,1478652135.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:15.665Z,1478652135.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:16.020Z,1478652136.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:16.450Z,1478652136.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:16.858Z,1478652136.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:17.221Z,1478652137.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:17.626Z,1478652137.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:18.033Z,1478652138.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:18.433Z,1478652138.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:18.832Z,1478652138.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:19.214Z,1478652139.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:19.642Z,1478652139.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:20.037Z,1478652140.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:20.446Z,1478652140.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:20.854Z,1478652140.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:21.221Z,1478652141.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:21.626Z,1478652141.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:22.021Z,1478652142.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:22.428Z,1478652142.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:22.846Z,1478652142.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:23.235Z,1478652143.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:23.632Z,1478652143.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:24.033Z,1478652144.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:24.433Z,1478652144.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:24.848Z,1478652144.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:25.250Z,1478652145.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:25.627Z,1478652145.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:26.034Z,1478652146.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:26.423Z,1478652146.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:26.841Z,1478652146.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:27.254Z,1478652147.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:27.621Z,1478652147.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:28.060Z,1478652148.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:28.425Z,1478652148.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:28.858Z,1478652148.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:29.234Z,1478652149.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:29.637Z,1478652149.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:29.988Z,1478652149.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:30.079Z,1478652150.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:30.496Z,1478652150.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:30.517Z,1478652150.517 [Startup:StartupSatComms:A](INFO): Timed out from 2016-11-09T00:41:30.5Z
2016-11-09T00:42:30.517Z,1478652150.517 [Startup:StartupSatComms:A] Stopped
2016-11-09T00:42:30.517Z,1478652150.517 [Startup:StartupSatComms:B] Running Loop=1
2016-11-09T00:42:30.784Z,1478652150.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:30.875Z,1478652150.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:30.889Z,1478652150.889 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-11-09T00:42:31.188Z,1478652151.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:31.232Z,1478652151.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:31.663Z,1478652151.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:31.984Z,1478652151.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:32.026Z,1478652152.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:32.429Z,1478652152.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:32.780Z,1478652152.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:32.838Z,1478652152.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:33.184Z,1478652153.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:33.227Z,1478652153.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:33.639Z,1478652153.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:33.980Z,1478652153.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:34.040Z,1478652154.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:34.414Z,1478652154.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:34.776Z,1478652154.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:34.826Z,1478652154.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:35.180Z,1478652155.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:35.241Z,1478652155.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:35.638Z,1478652155.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:35.976Z,1478652155.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:36.041Z,1478652156.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:36.495Z,1478652156.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:36.784Z,1478652156.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:36.828Z,1478652156.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:37.192Z,1478652157.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:37.214Z,1478652157.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:37.617Z,1478652157.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:37.990Z,1478652157.990 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:38.018Z,1478652158.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:38.420Z,1478652158.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:38.784Z,1478652158.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:38.838Z,1478652158.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:39.189Z,1478652159.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:39.235Z,1478652159.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:39.635Z,1478652159.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:39.984Z,1478652159.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:40.032Z,1478652160.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:40.496Z,1478652160.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:40.780Z,1478652160.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:40.843Z,1478652160.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:41.184Z,1478652161.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:41.250Z,1478652161.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:41.628Z,1478652161.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:41.980Z,1478652161.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:42.026Z,1478652162.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:42.483Z,1478652162.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:42.776Z,1478652162.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:42.826Z,1478652162.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:43.180Z,1478652163.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:43.218Z,1478652163.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:43.655Z,1478652163.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:43.976Z,1478652163.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:44.024Z,1478652164.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:44.476Z,1478652164.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:44.784Z,1478652164.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:44.837Z,1478652164.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:45.216Z,1478652165.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:45.252Z,1478652165.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:45.679Z,1478652165.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.013Z,1478652166.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:46.043Z,1478652166.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.495Z,1478652166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.808Z,1478652166.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:46.888Z,1478652166.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.888Z,1478652166.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2016-11-09T00:42:46.888Z,1478652166.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2016-11-09T00:42:46.890Z,1478652166.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.891Z,1478652166.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2016-11-09T00:42:46.891Z,1478652166.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2016-11-09T00:42:46.897Z,1478652166.897 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.897Z,1478652166.897 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2016-11-09T00:42:46.897Z,1478652166.897 [DeadReckonWithRespectToWater](ERROR): Software Fault
2016-11-09T00:42:46.904Z,1478652166.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.904Z,1478652166.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2016-11-09T00:42:46.904Z,1478652166.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:42:46.906Z,1478652166.906 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:46.906Z,1478652166.906 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-09T00:42:46.906Z,1478652166.906 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:42:46.936Z,1478652166.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2016-11-09T00:42:46.937Z,1478652166.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2016-11-09T00:42:46.937Z,1478652166.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2016-11-09T00:42:46.937Z,1478652166.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:42:46.937Z,1478652166.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:42:47.212Z,1478652167.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:47.266Z,1478652167.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2016-11-09T00:42:47.266Z,1478652167.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2016-11-09T00:42:47.269Z,1478652167.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2016-11-09T00:42:47.269Z,1478652167.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2016-11-09T00:42:47.271Z,1478652167.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2016-11-09T00:42:47.271Z,1478652167.271 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2016-11-09T00:42:47.273Z,1478652167.273 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:42:47.273Z,1478652167.273 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2016-11-09T00:42:47.275Z,1478652167.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:42:47.275Z,1478652167.275 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-09T00:42:47.624Z,1478652167.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2016-11-09T00:42:47.625Z,1478652167.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:42:47.625Z,1478652167.625 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:42:47.625Z,1478652167.625 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2016-11-09T00:42:47.626Z,1478652167.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:42:47.626Z,1478652167.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:42:47.627Z,1478652167.626 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2016-11-09T00:42:47.627Z,1478652167.627 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:42:47.631Z,1478652167.631 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:42:47.632Z,1478652167.632 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:42:47.632Z,1478652167.632 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:42:47.633Z,1478652167.633 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:42:47.633Z,1478652167.633 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:42:47.633Z,1478652167.634 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:42:47.634Z,1478652167.634 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:42:48.008Z,1478652168.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:48.021Z,1478652168.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:48.472Z,1478652168.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:48.804Z,1478652168.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:48.837Z,1478652168.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:49.208Z,1478652169.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:49.225Z,1478652169.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:49.631Z,1478652169.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:50.004Z,1478652170.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:50.042Z,1478652170.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:50.472Z,1478652170.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:50.800Z,1478652170.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:50.876Z,1478652170.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:51.204Z,1478652171.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:51.254Z,1478652171.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:51.657Z,1478652171.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:52.001Z,1478652172.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:52.032Z,1478652172.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:52.486Z,1478652172.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:52.797Z,1478652172.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:52.851Z,1478652172.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:53.200Z,1478652173.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:53.245Z,1478652173.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:53.630Z,1478652173.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:53.996Z,1478652173.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:54.014Z,1478652174.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:54.483Z,1478652174.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:54.792Z,1478652174.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:54.845Z,1478652174.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:55.197Z,1478652175.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:55.215Z,1478652175.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:55.622Z,1478652175.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:55.992Z,1478652175.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:56.062Z,1478652176.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:56.470Z,1478652176.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:56.792Z,1478652176.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:56.844Z,1478652176.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:57.196Z,1478652177.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:57.233Z,1478652177.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:57.625Z,1478652177.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:57.993Z,1478652177.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:58.078Z,1478652178.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:58.479Z,1478652178.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:58.788Z,1478652178.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:58.853Z,1478652178.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:59.194Z,1478652179.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:42:59.222Z,1478652179.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:59.648Z,1478652179.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:42:59.989Z,1478652179.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:00.061Z,1478652180.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:00.477Z,1478652180.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:00.784Z,1478652180.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:00.838Z,1478652180.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:01.188Z,1478652181.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:01.244Z,1478652181.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:01.668Z,1478652181.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:01.984Z,1478652181.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:02.045Z,1478652182.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:02.490Z,1478652182.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:02.780Z,1478652182.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:02.845Z,1478652182.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:03.184Z,1478652183.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:03.215Z,1478652183.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:03.621Z,1478652183.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:03.980Z,1478652183.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:04.039Z,1478652184.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:04.470Z,1478652184.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:04.776Z,1478652184.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:04.851Z,1478652184.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:05.180Z,1478652185.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:05.237Z,1478652185.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:05.635Z,1478652185.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:05.976Z,1478652185.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:06.054Z,1478652186.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:06.486Z,1478652186.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:06.785Z,1478652186.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:06.854Z,1478652186.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:07.192Z,1478652187.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:07.243Z,1478652187.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:07.640Z,1478652187.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:07.989Z,1478652187.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:08.047Z,1478652188.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:08.488Z,1478652188.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:08.784Z,1478652188.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:08.854Z,1478652188.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:09.188Z,1478652189.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:09.254Z,1478652189.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:09.650Z,1478652189.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:09.984Z,1478652189.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:10.015Z,1478652190.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:10.514Z,1478652190.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:10.780Z,1478652190.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:10.844Z,1478652190.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:11.184Z,1478652191.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:11.249Z,1478652191.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:11.633Z,1478652191.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:11.980Z,1478652191.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:12.045Z,1478652192.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:12.513Z,1478652192.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:12.776Z,1478652192.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:12.844Z,1478652192.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:13.180Z,1478652193.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:13.266Z,1478652193.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:13.630Z,1478652193.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:13.976Z,1478652193.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:14.066Z,1478652194.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:14.516Z,1478652194.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:14.780Z,1478652194.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:14.850Z,1478652194.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:15.184Z,1478652195.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:15.245Z,1478652195.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:15.626Z,1478652195.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:15.980Z,1478652195.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:16.035Z,1478652196.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:16.477Z,1478652196.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:16.776Z,1478652196.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:16.844Z,1478652196.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:17.180Z,1478652197.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:17.240Z,1478652197.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:17.635Z,1478652197.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:17.976Z,1478652197.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:18.024Z,1478652198.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:18.479Z,1478652198.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:18.784Z,1478652198.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:18.862Z,1478652198.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:19.192Z,1478652199.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:19.245Z,1478652199.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:19.638Z,1478652199.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:19.988Z,1478652199.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:20.045Z,1478652200.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:20.469Z,1478652200.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:20.785Z,1478652200.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:20.854Z,1478652200.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:21.192Z,1478652201.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:21.226Z,1478652201.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:21.629Z,1478652201.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:21.989Z,1478652201.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:22.037Z,1478652202.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:22.467Z,1478652202.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:22.784Z,1478652202.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:22.841Z,1478652202.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:23.190Z,1478652203.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:23.233Z,1478652203.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:23.628Z,1478652203.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:23.984Z,1478652203.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:24.049Z,1478652204.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:24.485Z,1478652204.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:24.780Z,1478652204.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:24.859Z,1478652204.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:25.185Z,1478652205.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:25.294Z,1478652205.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:25.637Z,1478652205.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:25.980Z,1478652205.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:26.036Z,1478652206.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:26.511Z,1478652206.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:26.777Z,1478652206.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:26.834Z,1478652206.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:27.192Z,1478652207.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:27.244Z,1478652207.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:27.662Z,1478652207.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:27.991Z,1478652207.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:28.030Z,1478652208.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:28.472Z,1478652208.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:28.789Z,1478652208.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:28.864Z,1478652208.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:29.194Z,1478652209.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:29.245Z,1478652209.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:29.636Z,1478652209.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:29.988Z,1478652209.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:30.044Z,1478652210.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:30.473Z,1478652210.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:30.784Z,1478652210.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:30.844Z,1478652210.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:30.854Z,1478652210.854 [Startup:StartupSatComms:B](INFO): Timed out from 2016-11-09T00:42:30.5Z
2016-11-09T00:43:30.854Z,1478652210.854 [Startup:StartupSatComms:B] Stopped
2016-11-09T00:43:30.854Z,1478652210.854 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2016-11-09T00:43:30.854Z,1478652210.854 [Startup:StartupSatComms] Stopped
2016-11-09T00:43:30.854Z,1478652210.855 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2016-11-09T00:43:30.860Z,1478652210.860 [Startup](INFO): Completed Startup
2016-11-09T00:43:30.860Z,1478652210.860 [Startup] Stopped
2016-11-09T00:43:30.860Z,1478652210.860 [Startup](DEBUG): Aggregate::uninitialize Startup
2016-11-09T00:43:30.860Z,1478652210.860 [Startup:A.GoToSurface] Stopped
2016-11-09T00:43:30.860Z,1478652210.860 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2016-11-09T00:43:31.188Z,1478652211.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:31.236Z,1478652211.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:31.246Z,1478652211.246 [MissionManager](IMPORTANT): Started mission Default
2016-11-09T00:43:31.246Z,1478652211.246 [Default] Running Loop=1
2016-11-09T00:43:31.246Z,1478652211.246 [Default](DEBUG): Aggregate::initialize Default
2016-11-09T00:43:31.246Z,1478652211.246 [Default:B.GoToSurface] Running Loop=1
2016-11-09T00:43:31.246Z,1478652211.246 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2016-11-09T00:43:31.247Z,1478652211.247 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2016-11-09T00:43:31.247Z,1478652211.247 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2016-11-09T00:43:31.251Z,1478652211.251 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2016-11-09T00:43:31.252Z,1478652211.252 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2016-11-09T00:43:31.252Z,1478652211.252 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2016-11-09T00:43:31.252Z,1478652211.252 [Default:A.Wait] Running Loop=1
2016-11-09T00:43:31.252Z,1478652211.252 [Default:A.Wait](DEBUG): Initialize Wait Component.
2016-11-09T00:43:31.629Z,1478652211.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:31.984Z,1478652211.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:32.041Z,1478652212.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:32.451Z,1478652212.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:32.782Z,1478652212.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:32.838Z,1478652212.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:33.189Z,1478652213.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:33.234Z,1478652213.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:33.630Z,1478652213.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:33.988Z,1478652213.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:34.040Z,1478652214.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:34.486Z,1478652214.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:34.784Z,1478652214.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:34.856Z,1478652214.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:35.188Z,1478652215.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:35.245Z,1478652215.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:35.639Z,1478652215.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:35.984Z,1478652215.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:36.042Z,1478652216.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:36.447Z,1478652216.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:36.780Z,1478652216.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:36.833Z,1478652216.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:37.185Z,1478652217.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:37.230Z,1478652217.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:37.625Z,1478652217.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:37.980Z,1478652217.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:38.028Z,1478652218.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:38.441Z,1478652218.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:38.777Z,1478652218.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:38.838Z,1478652218.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:39.190Z,1478652219.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:39.226Z,1478652219.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:39.638Z,1478652219.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:39.985Z,1478652219.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:40.038Z,1478652220.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:40.446Z,1478652220.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:40.780Z,1478652220.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:40.874Z,1478652220.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:41.184Z,1478652221.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:41.237Z,1478652221.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:41.634Z,1478652221.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:41.980Z,1478652221.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:42.075Z,1478652222.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:42.438Z,1478652222.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:42.776Z,1478652222.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:42.850Z,1478652222.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:43.181Z,1478652223.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:43.262Z,1478652223.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:43.622Z,1478652223.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:43.976Z,1478652223.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:44.022Z,1478652224.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:44.432Z,1478652224.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:44.438Z,1478652224.438 [Default:A.Wait](INFO): Done Waiting.
2016-11-09T00:43:44.438Z,1478652224.438 [Default:A.Wait] Stopped
2016-11-09T00:43:44.438Z,1478652224.438 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2016-11-09T00:43:44.781Z,1478652224.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:44.850Z,1478652224.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:44.864Z,1478652224.864 [Default:CheckIn] Running Loop=1
2016-11-09T00:43:44.864Z,1478652224.865 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-09T00:43:44.865Z,1478652224.865 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-09T00:43:45.188Z,1478652225.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:45.245Z,1478652225.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:45.272Z,1478652225.272 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2016-11-09T00:43:45.641Z,1478652225.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:45.984Z,1478652225.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:46.038Z,1478652226.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:46.437Z,1478652226.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:46.780Z,1478652226.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:46.845Z,1478652226.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:47.184Z,1478652227.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:47.237Z,1478652227.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:47.632Z,1478652227.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:47.981Z,1478652227.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:48.038Z,1478652228.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:48.441Z,1478652228.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:48.776Z,1478652228.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:48.838Z,1478652228.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:49.180Z,1478652229.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:49.230Z,1478652229.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:49.645Z,1478652229.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:49.976Z,1478652229.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:50.040Z,1478652230.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:50.441Z,1478652230.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:50.776Z,1478652230.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:50.818Z,1478652230.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:51.180Z,1478652231.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:51.218Z,1478652231.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:51.621Z,1478652231.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:51.976Z,1478652231.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:52.052Z,1478652232.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:52.450Z,1478652232.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:52.784Z,1478652232.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:52.848Z,1478652232.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:53.192Z,1478652233.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:53.228Z,1478652233.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:53.629Z,1478652233.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:53.989Z,1478652233.989 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:54.025Z,1478652234.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:54.435Z,1478652234.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:54.772Z,1478652234.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:54.827Z,1478652234.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:55.266Z,1478652235.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:55.568Z,1478652235.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:55.623Z,1478652235.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:56.028Z,1478652236.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:56.364Z,1478652236.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:56.466Z,1478652236.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:56.789Z,1478652236.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:56.826Z,1478652236.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:57.268Z,1478652237.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:57.584Z,1478652237.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:57.661Z,1478652237.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:58.041Z,1478652238.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:58.380Z,1478652238.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:58.447Z,1478652238.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:58.784Z,1478652238.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:58.828Z,1478652238.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:59.224Z,1478652239.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:43:59.580Z,1478652239.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:43:59.631Z,1478652239.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:00.030Z,1478652240.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:00.376Z,1478652240.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:00.449Z,1478652240.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:00.780Z,1478652240.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:00.838Z,1478652240.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:01.236Z,1478652241.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:01.576Z,1478652241.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:01.641Z,1478652241.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:02.014Z,1478652242.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:02.387Z,1478652242.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:02.458Z,1478652242.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:02.792Z,1478652242.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:02.848Z,1478652242.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:03.238Z,1478652243.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:03.588Z,1478652243.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:03.648Z,1478652243.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:04.017Z,1478652244.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:04.384Z,1478652244.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:04.434Z,1478652244.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:04.788Z,1478652244.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:04.835Z,1478652244.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:05.226Z,1478652245.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:05.584Z,1478652245.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:05.629Z,1478652245.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:06.022Z,1478652246.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:06.380Z,1478652246.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:06.461Z,1478652246.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:06.784Z,1478652246.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:06.835Z,1478652246.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:07.232Z,1478652247.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:07.580Z,1478652247.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:07.649Z,1478652247.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:08.038Z,1478652248.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:08.376Z,1478652248.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:08.456Z,1478652248.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:08.780Z,1478652248.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:08.839Z,1478652248.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:09.226Z,1478652249.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:09.576Z,1478652249.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:09.638Z,1478652249.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:10.053Z,1478652250.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:10.385Z,1478652250.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:10.430Z,1478652250.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:10.822Z,1478652250.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:10.828Z,1478652250.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:11.263Z,1478652251.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:11.622Z,1478652251.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:11.624Z,1478652251.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:12.056Z,1478652252.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:12.420Z,1478652252.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:12.470Z,1478652252.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:12.824Z,1478652252.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:12.844Z,1478652252.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:13.244Z,1478652253.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:13.620Z,1478652253.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:13.649Z,1478652253.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:14.038Z,1478652254.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:14.432Z,1478652254.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:14.442Z,1478652254.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:14.836Z,1478652254.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:14.847Z,1478652254.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:15.218Z,1478652255.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:15.622Z,1478652255.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:15.632Z,1478652255.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:16.021Z,1478652256.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:16.418Z,1478652256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:16.436Z,1478652256.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:16.840Z,1478652256.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:16.864Z,1478652256.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:17.233Z,1478652257.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:17.632Z,1478652257.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:17.636Z,1478652257.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:18.037Z,1478652258.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:18.432Z,1478652258.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:18.439Z,1478652258.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:18.830Z,1478652258.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:18.836Z,1478652258.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:19.226Z,1478652259.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:19.632Z,1478652259.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:19.638Z,1478652259.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:20.018Z,1478652260.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:20.414Z,1478652260.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:20.444Z,1478652260.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:20.822Z,1478652260.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:20.848Z,1478652260.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:21.222Z,1478652261.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:21.621Z,1478652261.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:21.644Z,1478652261.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:22.041Z,1478652262.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:22.435Z,1478652262.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:22.440Z,1478652262.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:22.826Z,1478652262.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:22.844Z,1478652262.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:23.226Z,1478652263.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:23.622Z,1478652263.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:23.640Z,1478652263.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:24.022Z,1478652264.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:24.436Z,1478652264.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:24.454Z,1478652264.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:24.840Z,1478652264.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:24.854Z,1478652264.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:25.239Z,1478652265.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:25.636Z,1478652265.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:25.638Z,1478652265.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:26.050Z,1478652266.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:26.432Z,1478652266.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:26.442Z,1478652266.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:26.836Z,1478652266.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:26.850Z,1478652266.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:27.245Z,1478652267.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:27.616Z,1478652267.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:27.632Z,1478652267.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:28.021Z,1478652268.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:28.428Z,1478652268.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:28.449Z,1478652268.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:28.825Z,1478652268.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:28.832Z,1478652268.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:29.229Z,1478652269.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:29.622Z,1478652269.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:29.628Z,1478652269.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:30.025Z,1478652270.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:30.421Z,1478652270.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:30.424Z,1478652270.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:30.828Z,1478652270.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:30.837Z,1478652270.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:31.234Z,1478652271.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:31.624Z,1478652271.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:31.636Z,1478652271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:32.022Z,1478652272.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:32.420Z,1478652272.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:32.437Z,1478652272.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:32.824Z,1478652272.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:32.840Z,1478652272.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:33.222Z,1478652273.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:33.620Z,1478652273.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:33.626Z,1478652273.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:34.033Z,1478652274.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:34.416Z,1478652274.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:34.426Z,1478652274.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:34.820Z,1478652274.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:34.832Z,1478652274.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:35.238Z,1478652275.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:35.616Z,1478652275.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:35.649Z,1478652275.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:36.025Z,1478652276.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:36.412Z,1478652276.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:36.441Z,1478652276.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:36.816Z,1478652276.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:36.818Z,1478652276.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:37.217Z,1478652277.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:37.612Z,1478652277.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:37.623Z,1478652277.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:38.026Z,1478652278.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:38.408Z,1478652278.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:38.424Z,1478652278.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:38.812Z,1478652278.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:38.823Z,1478652278.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:39.282Z,1478652279.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:39.608Z,1478652279.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:39.633Z,1478652279.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:40.051Z,1478652280.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:40.404Z,1478652280.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:40.460Z,1478652280.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:40.808Z,1478652280.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:40.850Z,1478652280.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:41.255Z,1478652281.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:41.604Z,1478652281.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:41.618Z,1478652281.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:42.065Z,1478652282.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:42.401Z,1478652282.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:42.434Z,1478652282.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:42.804Z,1478652282.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:42.836Z,1478652282.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:43.223Z,1478652283.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:43.601Z,1478652283.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:43.661Z,1478652283.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:44.019Z,1478652284.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:44.396Z,1478652284.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:44.460Z,1478652284.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:44.800Z,1478652284.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:44.849Z,1478652284.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:45.249Z,1478652285.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:45.597Z,1478652285.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:45.636Z,1478652285.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:46.038Z,1478652286.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:46.392Z,1478652286.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:46.450Z,1478652286.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:46.796Z,1478652286.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:46.860Z,1478652286.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:47.222Z,1478652287.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:47.593Z,1478652287.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:47.642Z,1478652287.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:48.030Z,1478652288.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:48.388Z,1478652288.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:48.454Z,1478652288.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:48.792Z,1478652288.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:48.838Z,1478652288.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:49.588Z,1478652289.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:50.384Z,1478652290.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:50.792Z,1478652290.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:51.588Z,1478652291.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:52.324Z,1478652292.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:52.384Z,1478652292.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:52.462Z,1478652292.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:52.792Z,1478652292.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:52.816Z,1478652292.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:53.164Z,1478652293.164 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003900
2016-11-09T00:44:53.258Z,1478652293.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:53.588Z,1478652293.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:53.646Z,1478652293.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:54.009Z,1478652294.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:54.387Z,1478652294.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:54.417Z,1478652294.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:54.793Z,1478652294.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:54.853Z,1478652294.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:55.219Z,1478652295.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:55.588Z,1478652295.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:55.640Z,1478652295.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:56.016Z,1478652296.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:56.384Z,1478652296.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:56.449Z,1478652296.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:56.788Z,1478652296.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:56.851Z,1478652296.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:57.251Z,1478652297.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:57.585Z,1478652297.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:57.637Z,1478652297.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:58.018Z,1478652298.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:58.380Z,1478652298.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:58.425Z,1478652298.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:58.788Z,1478652298.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:58.834Z,1478652298.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:59.218Z,1478652299.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:44:59.584Z,1478652299.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:44:59.611Z,1478652299.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:00.015Z,1478652300.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:00.380Z,1478652300.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:00.414Z,1478652300.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:00.788Z,1478652300.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:00.799Z,1478652300.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:01.201Z,1478652301.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:01.584Z,1478652301.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:01.670Z,1478652301.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:02.001Z,1478652302.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:02.381Z,1478652302.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:02.436Z,1478652302.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:02.789Z,1478652302.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:02.821Z,1478652302.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:03.177Z,1478652303.177 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-09T00:45:03.218Z,1478652303.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:03.584Z,1478652303.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:03.613Z,1478652303.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:04.020Z,1478652304.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:04.390Z,1478652304.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:04.428Z,1478652304.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:04.819Z,1478652304.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:04.824Z,1478652304.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:05.213Z,1478652305.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:05.613Z,1478652305.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:05.620Z,1478652305.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:05.997Z,1478652305.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:06.416Z,1478652306.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:06.430Z,1478652306.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:06.820Z,1478652306.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:06.823Z,1478652306.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:07.225Z,1478652307.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:07.616Z,1478652307.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:07.623Z,1478652307.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:08.022Z,1478652308.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:08.412Z,1478652308.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:08.442Z,1478652308.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:08.805Z,1478652308.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:08.816Z,1478652308.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:09.238Z,1478652309.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:09.612Z,1478652309.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:09.617Z,1478652309.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:10.036Z,1478652310.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:10.408Z,1478652310.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:10.458Z,1478652310.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:10.812Z,1478652310.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:10.894Z,1478652310.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:11.217Z,1478652311.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:11.608Z,1478652311.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:11.615Z,1478652311.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:12.014Z,1478652312.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:12.404Z,1478652312.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:12.470Z,1478652312.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:12.809Z,1478652312.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:12.916Z,1478652312.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:13.281Z,1478652313.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:13.612Z,1478652313.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:13.632Z,1478652313.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:14.039Z,1478652314.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:14.408Z,1478652314.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:14.435Z,1478652314.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:14.812Z,1478652314.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:14.838Z,1478652314.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:15.210Z,1478652315.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:15.608Z,1478652315.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:15.615Z,1478652315.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:16.047Z,1478652316.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:16.404Z,1478652316.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:16.426Z,1478652316.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:16.808Z,1478652316.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:16.831Z,1478652316.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:17.207Z,1478652317.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:17.604Z,1478652317.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:17.612Z,1478652317.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:18.017Z,1478652318.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:18.400Z,1478652318.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:18.421Z,1478652318.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:18.804Z,1478652318.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:18.824Z,1478652318.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:19.225Z,1478652319.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:19.600Z,1478652319.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:19.610Z,1478652319.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:20.014Z,1478652320.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:20.396Z,1478652320.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:20.421Z,1478652320.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:20.800Z,1478652320.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:20.821Z,1478652320.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:21.198Z,1478652321.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:21.596Z,1478652321.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:21.633Z,1478652321.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:22.029Z,1478652322.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:22.394Z,1478652322.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:22.502Z,1478652322.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:22.800Z,1478652322.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:22.807Z,1478652322.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:23.204Z,1478652323.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:23.596Z,1478652323.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:23.646Z,1478652323.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:24.006Z,1478652324.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:24.392Z,1478652324.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:24.454Z,1478652324.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:24.797Z,1478652324.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:24.857Z,1478652324.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:25.229Z,1478652325.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:25.592Z,1478652325.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:25.612Z,1478652325.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:26.010Z,1478652326.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:26.389Z,1478652326.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:26.432Z,1478652326.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:26.792Z,1478652326.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:26.825Z,1478652326.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:27.210Z,1478652327.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:27.588Z,1478652327.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:27.633Z,1478652327.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:28.025Z,1478652328.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:28.384Z,1478652328.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:28.428Z,1478652328.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:28.818Z,1478652328.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:29.180Z,1478652329.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:29.220Z,1478652329.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:29.611Z,1478652329.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:29.976Z,1478652329.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:30.016Z,1478652330.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:30.419Z,1478652330.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:30.772Z,1478652330.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:30.822Z,1478652330.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:31.261Z,1478652331.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:31.568Z,1478652331.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:31.620Z,1478652331.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:32.002Z,1478652332.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:32.364Z,1478652332.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:32.399Z,1478652332.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:32.808Z,1478652332.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:33.160Z,1478652333.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:33.209Z,1478652333.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:33.616Z,1478652333.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:33.964Z,1478652333.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:34.021Z,1478652334.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:34.417Z,1478652334.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:34.760Z,1478652334.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:34.810Z,1478652334.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:35.221Z,1478652335.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:35.564Z,1478652335.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:35.615Z,1478652335.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:36.002Z,1478652336.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:36.360Z,1478652336.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:36.442Z,1478652336.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:36.774Z,1478652336.774 [NAL9602](INFO): GPS fix at 20161109T004407: (36.802657, -121.788033)
2016-11-09T00:45:36.857Z,1478652336.857 [Default:CheckIn:Read_GPS] Stopped
2016-11-09T00:45:36.857Z,1478652336.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-09T00:45:37.180Z,1478652337.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:37.346Z,1478652337.346 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2016-11-09T00:45:37.976Z,1478652337.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:38.772Z,1478652338.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:39.568Z,1478652339.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:40.364Z,1478652340.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:41.160Z,1478652341.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:41.956Z,1478652341.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:42.752Z,1478652342.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:45:42.808Z,1478652342.808 [CommandLine](IMPORTANT): got command failComponent hardware Rowe_600LCM
2016-11-09T00:45:42.808Z,1478652342.808 [Rowe_600LCM] Hardware Fault, FailCount= 1
2016-11-09T00:45:42.808Z,1478652342.808 [Rowe_600LCM](ERROR): Hardware Fault
2016-11-09T00:45:42.809Z,1478652342.809 [CommandLine](IMPORTANT): Rowe_600LCM failureMode is Hardware Fault
2016-11-09T00:45:43.952Z,1478652343.952 [Rowe_600LCM](INFO): Powering down
2016-11-09T00:45:44.445Z,1478652344.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-09T00:45:44.491Z,1478652344.491 [CBIT](ERROR): Hardware Fault in component: Rowe_600LCM
2016-11-09T00:45:44.516Z,1478652344.516 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20161109T002347/Courier0012.lzma
2016-11-09T00:45:44.641Z,1478652344.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2016-11-09T00:45:44.760Z,1478652344.760 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2016-11-09T00:45:45.013Z,1478652345.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2016-11-09T00:45:45.301Z,1478652345.301 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Courier0012.lzma.bak
2016-11-09T00:45:45.301Z,1478652345.301 [DataOverHttps](INFO): SBD MOMSN=4552875
2016-11-09T00:45:45.425Z,1478652345.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2016-11-09T00:45:45.472Z,1478652345.472 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-09T00:45:45.472Z,1478652345.472 [Rowe_600LCM] No Fault, FailCount= 1
2016-11-09T00:45:45.567Z,1478652345.567 [Rowe_600LCM](INFO): Initializing
2016-11-09T00:45:45.568Z,1478652345.568 [Rowe_600LCM](INFO): Checking LCM
2016-11-09T00:45:45.568Z,1478652345.568 [Rowe_600LCM](INFO): LCM OK
2016-11-09T00:45:45.568Z,1478652345.568 [Rowe_600LCM](INFO): Powering up
2016-11-09T00:45:46.212Z,1478652346.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2016-11-09T00:45:46.353Z,1478652346.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2016-11-09T00:45:49.795Z,1478652349.795 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-09T00:45:49.906Z,1478652349.906 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-09T00:45:49.907Z,1478652349.907 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-09T00:45:49.908Z,1478652349.908 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-09T00:45:49.909Z,1478652349.909 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-09T00:45:50.633Z,1478652350.634 [NAL9602](INFO): Powering down
2016-11-09T00:45:50.728Z,1478652350.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:50.728Z,1478652350.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2016-11-09T00:45:50.728Z,1478652350.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:45:50.730Z,1478652350.730 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:45:50.731Z,1478652350.731 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2016-11-09T00:45:50.731Z,1478652350.731 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:45:50.747Z,1478652350.747 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:45:50.747Z,1478652350.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:45:51.015Z,1478652351.015 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:45:51.015Z,1478652351.016 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2016-11-09T00:45:51.016Z,1478652351.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:45:51.016Z,1478652351.016 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2016-11-09T00:45:51.208Z,1478652351.208 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:45:51.208Z,1478652351.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:45:51.209Z,1478652351.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:45:51.210Z,1478652351.210 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:45:51.210Z,1478652351.210 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:45:51.211Z,1478652351.211 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:45:55.982Z,1478652355.982 [CommandLine](IMPORTANT): got command report touch Rowe_600LCM.height_above_sea_floor
2016-11-09T00:45:57.545Z,1478652357.545 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20161109T002347/Courier0016.lzma
2016-11-09T00:45:58.337Z,1478652358.337 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Courier0016.lzma.bak
2016-11-09T00:45:58.337Z,1478652358.337 [DataOverHttps](INFO): SBD MOMSN=4552877
2016-11-09T00:45:59.875Z,1478652359.875 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:03.668Z,1478652363.668 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:04.196Z,1478652364.196 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:09.003Z,1478652369.003 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:09.025Z,1478652369.025 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20161109T003936/Courier0004.lzma
2016-11-09T00:46:09.813Z,1478652369.813 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Courier0004.lzma.bak
2016-11-09T00:46:09.813Z,1478652369.813 [DataOverHttps](INFO): SBD MOMSN=4552879
2016-11-09T00:46:09.928Z,1478652369.928 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:15.658Z,1478652375.658 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 78.875999 m
2016-11-09T00:46:16.204Z,1478652376.204 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 75.799004 m
2016-11-09T00:46:20.934Z,1478652380.934 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 77.117996 m
2016-11-09T00:46:20.968Z,1478652380.968 [DataOverHttps](INFO): Sending 663 bytes from file Logs/20161109T002347/Express0001.lzma
2016-11-09T00:46:21.741Z,1478652381.741 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Express0001.lzma.bak
2016-11-09T00:46:21.741Z,1478652381.741 [DataOverHttps](INFO): SBD MOMSN=4552883
2016-11-09T00:46:24.670Z,1478652384.670 [CommandLine](IMPORTANT): got command show variable rowe_600lcm
2016-11-09T00:46:24.714Z,1478652384.714 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup (bool)
2016-11-09T00:46:24.714Z,1478652384.714 [CommandLine](IMPORTANT): Rowe_600LCM.simulateHardware (bool)
2016-11-09T00:46:24.714Z,1478652384.714 [CommandLine](IMPORTANT): Rowe_600LCM.bottomTrackVelocityAccuracy (meter_per_second)
2016-11-09T00:46:24.715Z,1478652384.715 [CommandLine](IMPORTANT): Rowe_600LCM.waterTrackVelocityAccuracy (meter_per_second)
2016-11-09T00:46:24.715Z,1478652384.715 [CommandLine](IMPORTANT): Rowe_600LCM.altitudeAccuracy (meter)
2016-11-09T00:46:24.735Z,1478652384.735 [CommandLine](IMPORTANT): Rowe_600LCM.loadControl (none)
2016-11-09T00:46:24.736Z,1478652384.736 [CommandLine](IMPORTANT): Rowe_600LCM.uart (none)
2016-11-09T00:46:24.736Z,1478652384.736 [CommandLine](IMPORTANT): Rowe_600LCM.baud (bit_per_second)
2016-11-09T00:46:24.737Z,1478652384.737 [CommandLine](IMPORTANT): Rowe_600LCM.maxSpeed (meter_per_second)
2016-11-09T00:46:24.737Z,1478652384.737 [CommandLine](IMPORTANT): Rowe_600LCM.lcmChannelBottom (none)
2016-11-09T00:46:24.737Z,1478652384.737 [CommandLine](IMPORTANT): Rowe_600LCM.lcmChannelWater (none)
2016-11-09T00:46:24.738Z,1478652384.738 [CommandLine](IMPORTANT): Rowe_600LCM.lcmChannelDVL (none)
2016-11-09T00:46:24.738Z,1478652384.738 [CommandLine](IMPORTANT): Rowe_600LCM.lcmApplication (none)
2016-11-09T00:46:24.762Z,1478652384.763 [CommandLine](IMPORTANT): Rowe_600LCM.height_above_sea_floor (meter)
2016-11-09T00:46:24.763Z,1478652384.763 [CommandLine](IMPORTANT): Rowe_600LCM.platform_x_velocity_wrt_ground (meter_per_second)
2016-11-09T00:46:24.763Z,1478652384.763 [CommandLine](IMPORTANT): Rowe_600LCM.platform_y_velocity_wrt_ground (meter_per_second)
2016-11-09T00:46:24.764Z,1478652384.764 [CommandLine](IMPORTANT): Rowe_600LCM.platform_z_velocity_wrt_ground (meter_per_second)
2016-11-09T00:46:24.764Z,1478652384.764 [CommandLine](IMPORTANT): Rowe_600LCM.platform_x_velocity_wrt_sea_water (meter_per_second)
2016-11-09T00:46:24.765Z,1478652384.765 [CommandLine](IMPORTANT): Rowe_600LCM.platform_y_velocity_wrt_sea_water (meter_per_second)
2016-11-09T00:46:24.765Z,1478652384.765 [CommandLine](IMPORTANT): Rowe_600LCM.platform_z_velocity_wrt_sea_water (meter_per_second)
2016-11-09T00:46:24.766Z,1478652384.766 [CommandLine](IMPORTANT): Rowe_600LCM.platform_velocity_wrt_ground (meter_per_second)
2016-11-09T00:46:24.766Z,1478652384.766 [CommandLine](IMPORTANT): Rowe_600LCM.platform_velocity_wrt_sea_water (meter_per_second)
2016-11-09T00:46:24.766Z,1478652384.766 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude1 (meter)
2016-11-09T00:46:24.767Z,1478652384.767 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude2 (meter)
2016-11-09T00:46:24.767Z,1478652384.767 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude3 (meter)
2016-11-09T00:46:24.767Z,1478652384.767 [CommandLine](IMPORTANT): Rowe_600LCM.Altitude4 (meter)
2016-11-09T00:46:24.784Z,1478652384.784 [CommandLine](IMPORTANT): Rowe_600LCM.durationOfLastRun (second)
2016-11-09T00:46:24.789Z,1478652384.789 [CommandLine](IMPORTANT): Rowe_600LCM.component_voltage (volt)
2016-11-09T00:46:24.789Z,1478652384.789 [CommandLine](IMPORTANT): Rowe_600LCM.component_avgVoltage (volt)
2016-11-09T00:46:24.790Z,1478652384.790 [CommandLine](IMPORTANT): Rowe_600LCM.component_current (milliampere)
2016-11-09T00:46:24.790Z,1478652384.790 [CommandLine](IMPORTANT): Rowe_600LCM.component_avgCurrent (milliampere)
2016-11-09T00:46:37.803Z,1478652397.803 [BPC1](ERROR): Failed to receive battery data
2016-11-09T00:46:37.803Z,1478652397.803 [BPC1] Communications Fault, FailCount= 1
2016-11-09T00:46:37.803Z,1478652397.803 [BPC1](ERROR): Communications Fault
2016-11-09T00:46:37.840Z,1478652397.840 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T00:46:37.841Z,1478652397.841 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 77.008003 m
2016-11-09T00:46:38.150Z,1478652398.150 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 76.678001 m
2016-11-09T00:46:41.969Z,1478652401.969 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 82.612000 m
2016-11-09T00:46:42.133Z,1478652402.133 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:46:42.133Z,1478652402.133 [BPC1] No Fault, FailCount= 1
2016-11-09T00:46:42.140Z,1478652402.140 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 83.271004 m
2016-11-09T00:46:47.285Z,1478652407.285 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 81.513000 m
2016-11-09T00:46:47.303Z,1478652407.303 [DataOverHttps](INFO): Sending 315 bytes from file Logs/20161109T002347/Express0005.lzma
2016-11-09T00:46:48.093Z,1478652408.093 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Express0005.lzma.bak
2016-11-09T00:46:48.093Z,1478652408.093 [DataOverHttps](INFO): SBD MOMSN=4552893
2016-11-09T00:46:48.208Z,1478652408.208 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:46:53.096Z,1478652413.096 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 77.008003 m
2016-11-09T00:46:54.392Z,1478652414.392 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 82.831001 m
2016-11-09T00:46:58.597Z,1478652418.597 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 79.315002 m
2016-11-09T00:46:58.621Z,1478652418.621 [DataOverHttps](INFO): Sending 1098 bytes from file Logs/20161109T002347/Express0009.lzma
2016-11-09T00:46:59.405Z,1478652419.405 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Express0009.lzma.bak
2016-11-09T00:46:59.405Z,1478652419.405 [DataOverHttps](INFO): SBD MOMSN=4552897
2016-11-09T00:47:01.311Z,1478652421.311 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:01.408Z,1478652421.408 [CommandLine](IMPORTANT): got command report touch Rowe_600LCM.platform_x_velocity_wrt_sea_water
2016-11-09T00:47:05.140Z,1478652425.140 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:05.141Z,1478652425.141 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.054000 m/s
2016-11-09T00:47:06.443Z,1478652426.443 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:06.448Z,1478652426.448 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.054000 m/s
2016-11-09T00:47:12.409Z,1478652432.409 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 81.513000 m
2016-11-09T00:47:12.410Z,1478652432.409 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:12.778Z,1478652432.778 [CommandLine](IMPORTANT): got command report touch Rowe_600LCM.platform_x_velocity_wrt_ground
2016-11-09T00:47:14.407Z,1478652434.407 [DataOverHttps](INFO): Sending 173 bytes from file Logs/20161109T002347/Express0013.lzma
2016-11-09T00:47:14.511Z,1478652434.511 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 78.986000 m
2016-11-09T00:47:14.512Z,1478652434.512 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:14.513Z,1478652434.513 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground -0.041000 m/s
2016-11-09T00:47:15.222Z,1478652435.222 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Express0013.lzma.bak
2016-11-09T00:47:15.222Z,1478652435.222 [DataOverHttps](INFO): SBD MOMSN=4552986
2016-11-09T00:47:16.364Z,1478652436.364 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 79.974998 m
2016-11-09T00:47:16.365Z,1478652436.365 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:16.365Z,1478652436.365 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground 0.065000 m/s
2016-11-09T00:47:20.131Z,1478652440.131 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:20.132Z,1478652440.132 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.054000 m/s
2016-11-09T00:47:20.132Z,1478652440.132 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground nan m/s
2016-11-09T00:47:20.304Z,1478652440.304 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:20.305Z,1478652440.305 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.054000 m/s
2016-11-09T00:47:20.306Z,1478652440.306 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground nan m/s
2016-11-09T00:47:25.343Z,1478652445.343 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 82.941002 m
2016-11-09T00:47:25.344Z,1478652445.344 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:25.345Z,1478652445.345 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground 0.060000 m/s
2016-11-09T00:47:25.363Z,1478652445.363 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20161109T002347/Express0017.lzma
2016-11-09T00:47:26.153Z,1478652446.153 [DataOverHttps](INFO): Moved sent file to Logs/20161109T002347/Express0017.lzma.bak
2016-11-09T00:47:26.153Z,1478652446.153 [DataOverHttps](INFO): SBD MOMSN=4552990
2016-11-09T00:47:26.263Z,1478652446.263 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 80.194000 m
2016-11-09T00:47:26.268Z,1478652446.268 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:26.268Z,1478652446.268 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground 0.018000 m/s
2016-11-09T00:47:31.049Z,1478652451.049 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 76.678001 m
2016-11-09T00:47:31.049Z,1478652451.049 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:31.050Z,1478652451.050 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground 0.045000 m/s
2016-11-09T00:47:32.396Z,1478652452.396 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 82.281998 m
2016-11-09T00:47:32.396Z,1478652452.397 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:32.397Z,1478652452.397 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground -0.057000 m/s
2016-11-09T00:47:36.392Z,1478652456.392 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 78.435997 m
2016-11-09T00:47:36.393Z,1478652456.393 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:36.394Z,1478652456.394 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground 0.001000 m/s
2016-11-09T00:47:36.623Z,1478652456.623 [DataOverHttps](INFO): Sending 900 bytes from file Logs/20161109T003936/Express0001.lzma
2016-11-09T00:47:37.201Z,1478652457.201 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Express0001.lzma.bak
2016-11-09T00:47:37.201Z,1478652457.201 [DataOverHttps](INFO): SBD MOMSN=4552992
2016-11-09T00:47:38.562Z,1478652458.562 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor nan m
2016-11-09T00:47:38.562Z,1478652458.562 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.054000 m/s
2016-11-09T00:47:38.583Z,1478652458.583 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground nan m/s
2016-11-09T00:47:42.269Z,1478652462.270 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 78.435997 m
2016-11-09T00:47:42.270Z,1478652462.270 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:42.271Z,1478652462.271 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground -0.063000 m/s
2016-11-09T00:47:47.351Z,1478652467.351 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 83.271004 m
2016-11-09T00:47:47.352Z,1478652467.352 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.050000 m/s
2016-11-09T00:47:47.352Z,1478652467.352 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground -0.090000 m/s
2016-11-09T00:47:47.400Z,1478652467.400 [DataOverHttps](INFO): Sending 600 bytes from file Logs/20161109T003936/Express0005.lzma
2016-11-09T00:47:48.177Z,1478652468.177 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Express0005.lzma.bak
2016-11-09T00:47:48.177Z,1478652468.177 [DataOverHttps](INFO): SBD MOMSN=4553002
2016-11-09T00:47:48.312Z,1478652468.312 [Reporter](INFO): Rowe_600LCM.height_above_sea_floor 81.292999 m
2016-11-09T00:47:48.313Z,1478652468.313 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_sea_water -2.010000 m/s
2016-11-09T00:47:48.313Z,1478652468.313 [Reporter](INFO): Rowe_600LCM.platform_x_velocity_wrt_ground -0.025000 m/s
2016-11-09T00:47:48.676Z,1478652468.676 [CommandLine](IMPORTANT): got command report clear
2016-11-09T00:47:49.923Z,1478652469.923 [Default:CheckIn:Read_Iridium] Stopped
2016-11-09T00:47:49.923Z,1478652469.923 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-09T00:47:49.923Z,1478652469.923 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-09T00:48:53.967Z,1478652533.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:48:53.967Z,1478652533.967 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2016-11-09T00:48:53.967Z,1478652533.967 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:48:53.969Z,1478652533.969 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:48:53.970Z,1478652533.970 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2016-11-09T00:48:53.970Z,1478652533.970 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:48:53.995Z,1478652533.995 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:48:53.995Z,1478652533.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:48:54.134Z,1478652534.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:48:54.134Z,1478652534.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2016-11-09T00:48:54.134Z,1478652534.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:48:54.134Z,1478652534.135 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2016-11-09T00:48:54.497Z,1478652534.497 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:48:54.497Z,1478652534.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:48:54.498Z,1478652534.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:48:54.498Z,1478652534.498 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:48:54.498Z,1478652534.498 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:48:54.499Z,1478652534.499 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:49:32.996Z,1478652572.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:33.792Z,1478652573.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:34.196Z,1478652574.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:34.992Z,1478652574.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:35.788Z,1478652575.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:36.192Z,1478652576.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:36.988Z,1478652576.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:37.784Z,1478652577.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:38.194Z,1478652578.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:38.988Z,1478652578.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:39.784Z,1478652579.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:40.188Z,1478652580.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:40.984Z,1478652580.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:41.780Z,1478652581.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:42.188Z,1478652582.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:42.984Z,1478652582.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:43.780Z,1478652583.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:44.184Z,1478652584.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:44.980Z,1478652584.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:45.777Z,1478652585.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:46.180Z,1478652586.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:46.885Z,1478652586.885 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-09T00:49:46.976Z,1478652586.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:47.772Z,1478652587.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:48.176Z,1478652588.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:48.972Z,1478652588.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:49.768Z,1478652589.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:50.176Z,1478652590.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:50.972Z,1478652590.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:51.768Z,1478652591.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:52.176Z,1478652592.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:52.972Z,1478652592.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:53.768Z,1478652593.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:54.172Z,1478652594.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:54.968Z,1478652594.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:55.764Z,1478652595.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:56.168Z,1478652596.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:56.964Z,1478652596.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:57.760Z,1478652597.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:58.164Z,1478652598.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:58.961Z,1478652598.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:49:59.756Z,1478652599.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:00.160Z,1478652600.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:00.956Z,1478652600.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:01.752Z,1478652601.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:02.156Z,1478652602.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:02.952Z,1478652602.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:03.748Z,1478652603.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:04.152Z,1478652604.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:04.948Z,1478652604.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:05.744Z,1478652605.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:06.148Z,1478652606.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:06.944Z,1478652606.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:07.740Z,1478652607.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:08.144Z,1478652608.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:08.940Z,1478652608.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:09.736Z,1478652609.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:10.140Z,1478652610.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:10.936Z,1478652610.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:11.732Z,1478652611.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:12.388Z,1478652612.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:13.184Z,1478652613.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:13.980Z,1478652613.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:14.384Z,1478652614.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:15.180Z,1478652615.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:15.976Z,1478652615.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:16.380Z,1478652616.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:17.176Z,1478652617.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:17.972Z,1478652617.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:18.376Z,1478652618.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:19.172Z,1478652619.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:19.968Z,1478652619.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:20.372Z,1478652620.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:21.168Z,1478652621.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:21.964Z,1478652621.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:22.368Z,1478652622.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:23.164Z,1478652623.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:23.960Z,1478652623.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:24.364Z,1478652624.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:25.160Z,1478652625.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:25.957Z,1478652625.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:26.360Z,1478652626.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:27.157Z,1478652627.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:27.955Z,1478652627.955 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:28.361Z,1478652628.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:29.157Z,1478652629.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:29.954Z,1478652629.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:30.362Z,1478652630.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:31.156Z,1478652631.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:31.954Z,1478652631.954 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:32.361Z,1478652632.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:33.157Z,1478652633.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:33.956Z,1478652633.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:34.362Z,1478652634.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:34.766Z,1478652634.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:35.159Z,1478652635.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:35.170Z,1478652635.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:35.565Z,1478652635.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:35.952Z,1478652635.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:35.964Z,1478652635.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:36.357Z,1478652636.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:36.358Z,1478652636.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:36.757Z,1478652636.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:37.154Z,1478652637.154 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:37.158Z,1478652637.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:37.561Z,1478652637.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:37.948Z,1478652637.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:37.961Z,1478652637.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:38.353Z,1478652638.353 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:38.359Z,1478652638.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:38.758Z,1478652638.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:39.148Z,1478652639.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:39.159Z,1478652639.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:39.566Z,1478652639.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:39.947Z,1478652639.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:39.964Z,1478652639.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:40.352Z,1478652640.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:40.362Z,1478652640.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:40.757Z,1478652640.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:41.148Z,1478652641.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:41.163Z,1478652641.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:41.564Z,1478652641.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:41.945Z,1478652641.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:41.963Z,1478652641.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:42.354Z,1478652642.354 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:42.367Z,1478652642.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:42.757Z,1478652642.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:43.150Z,1478652643.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:43.158Z,1478652643.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:43.561Z,1478652643.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:43.944Z,1478652643.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:43.965Z,1478652643.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:44.348Z,1478652644.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:44.358Z,1478652644.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:44.761Z,1478652644.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:45.144Z,1478652645.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:45.162Z,1478652645.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:45.940Z,1478652645.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:46.348Z,1478652646.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:47.147Z,1478652647.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:47.940Z,1478652647.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:48.345Z,1478652648.345 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:49.140Z,1478652649.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:49.159Z,1478652649.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:49.569Z,1478652649.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:49.936Z,1478652649.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:49.975Z,1478652649.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:50.340Z,1478652650.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:50.371Z,1478652650.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:50.757Z,1478652650.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:51.136Z,1478652651.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:51.171Z,1478652651.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:51.932Z,1478652651.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:52.336Z,1478652652.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:53.132Z,1478652653.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:53.928Z,1478652653.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:54.332Z,1478652654.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:54.736Z,1478652654.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:54.886Z,1478652654.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:55.128Z,1478652655.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:55.239Z,1478652655.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:55.659Z,1478652655.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:55.926Z,1478652655.926 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:56.041Z,1478652656.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:56.332Z,1478652656.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:56.441Z,1478652656.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:56.837Z,1478652656.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:57.128Z,1478652657.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:57.244Z,1478652657.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:57.646Z,1478652657.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:57.924Z,1478652657.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:58.044Z,1478652658.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:58.328Z,1478652658.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:58.441Z,1478652658.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:58.840Z,1478652658.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:59.126Z,1478652659.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:59.241Z,1478652659.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:59.654Z,1478652659.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:50:59.920Z,1478652659.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:00.038Z,1478652660.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:00.324Z,1478652660.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:00.444Z,1478652660.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:00.835Z,1478652660.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:01.120Z,1478652661.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:01.236Z,1478652661.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:01.653Z,1478652661.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:01.916Z,1478652661.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:02.033Z,1478652662.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:02.320Z,1478652662.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:02.436Z,1478652662.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:02.836Z,1478652662.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:03.116Z,1478652663.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:03.237Z,1478652663.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:03.644Z,1478652663.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:03.912Z,1478652663.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:04.047Z,1478652664.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:04.328Z,1478652664.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:04.446Z,1478652664.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:04.843Z,1478652664.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:05.124Z,1478652665.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:05.233Z,1478652665.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:05.646Z,1478652665.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:05.920Z,1478652665.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:06.034Z,1478652666.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:06.324Z,1478652666.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:06.437Z,1478652666.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:06.833Z,1478652666.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:07.120Z,1478652667.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:07.235Z,1478652667.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:07.639Z,1478652667.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:07.916Z,1478652667.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:08.033Z,1478652668.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:08.324Z,1478652668.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:08.433Z,1478652668.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:08.835Z,1478652668.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:09.120Z,1478652669.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:09.233Z,1478652669.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:09.642Z,1478652669.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:09.916Z,1478652669.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:10.033Z,1478652670.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:10.320Z,1478652670.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:10.436Z,1478652670.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:10.841Z,1478652670.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:11.116Z,1478652671.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:11.239Z,1478652671.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:11.642Z,1478652671.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:11.912Z,1478652671.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:12.036Z,1478652672.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:12.316Z,1478652672.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:12.445Z,1478652672.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:12.833Z,1478652672.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:13.112Z,1478652673.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:13.233Z,1478652673.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:13.634Z,1478652673.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:13.908Z,1478652673.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:14.033Z,1478652674.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:14.312Z,1478652674.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:14.433Z,1478652674.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:14.833Z,1478652674.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:15.108Z,1478652675.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:15.238Z,1478652675.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:15.633Z,1478652675.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:15.904Z,1478652675.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:16.041Z,1478652676.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:16.308Z,1478652676.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:16.437Z,1478652676.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:16.837Z,1478652676.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:17.104Z,1478652677.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:17.234Z,1478652677.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:17.640Z,1478652677.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:17.900Z,1478652677.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:18.048Z,1478652678.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:18.304Z,1478652678.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:18.444Z,1478652678.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:18.849Z,1478652678.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:19.100Z,1478652679.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:19.233Z,1478652679.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:19.633Z,1478652679.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:19.896Z,1478652679.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:20.033Z,1478652680.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:20.300Z,1478652680.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:20.446Z,1478652680.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:20.837Z,1478652680.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:21.096Z,1478652681.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:21.250Z,1478652681.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:21.633Z,1478652681.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:21.894Z,1478652681.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:22.048Z,1478652682.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:22.302Z,1478652682.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:22.437Z,1478652682.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:22.833Z,1478652682.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:23.096Z,1478652683.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:23.233Z,1478652683.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:23.633Z,1478652683.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:23.892Z,1478652683.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:24.033Z,1478652684.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:24.296Z,1478652684.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:24.438Z,1478652684.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:24.838Z,1478652684.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:25.092Z,1478652685.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:25.241Z,1478652685.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:25.640Z,1478652685.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:25.888Z,1478652685.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:26.050Z,1478652686.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:26.292Z,1478652686.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:26.446Z,1478652686.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:26.833Z,1478652686.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:27.090Z,1478652687.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:27.233Z,1478652687.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:27.649Z,1478652687.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:27.884Z,1478652687.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:28.037Z,1478652688.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:28.288Z,1478652688.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:28.433Z,1478652688.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:28.833Z,1478652688.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:29.084Z,1478652689.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:29.233Z,1478652689.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:29.633Z,1478652689.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:29.880Z,1478652689.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:30.045Z,1478652690.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:30.288Z,1478652690.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:30.437Z,1478652690.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:30.840Z,1478652690.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:31.084Z,1478652691.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:31.240Z,1478652691.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:31.639Z,1478652691.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:31.880Z,1478652691.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:32.048Z,1478652692.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:32.290Z,1478652692.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:32.449Z,1478652692.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:32.833Z,1478652692.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:33.084Z,1478652693.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:33.233Z,1478652693.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:33.633Z,1478652693.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:33.880Z,1478652693.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:34.041Z,1478652694.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:34.288Z,1478652694.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:34.437Z,1478652694.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:34.833Z,1478652694.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:35.084Z,1478652695.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:35.237Z,1478652695.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:35.643Z,1478652695.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:35.880Z,1478652695.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:36.041Z,1478652696.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:36.284Z,1478652696.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:36.440Z,1478652696.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:36.833Z,1478652696.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:37.080Z,1478652697.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:37.233Z,1478652697.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:37.633Z,1478652697.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:37.876Z,1478652697.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:38.044Z,1478652698.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:38.280Z,1478652698.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:38.448Z,1478652698.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:38.833Z,1478652698.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:39.076Z,1478652699.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:39.233Z,1478652699.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:39.641Z,1478652699.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:39.872Z,1478652699.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:40.041Z,1478652700.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:40.276Z,1478652700.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:40.433Z,1478652700.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:40.833Z,1478652700.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:41.072Z,1478652701.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:41.233Z,1478652701.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:41.633Z,1478652701.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:41.868Z,1478652701.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:42.033Z,1478652702.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:42.272Z,1478652702.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:42.439Z,1478652702.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:42.840Z,1478652702.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:43.068Z,1478652703.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:43.239Z,1478652703.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:43.640Z,1478652703.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:43.864Z,1478652703.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:44.048Z,1478652704.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:44.268Z,1478652704.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:44.436Z,1478652704.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:44.833Z,1478652704.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:45.064Z,1478652705.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:45.233Z,1478652705.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:45.641Z,1478652705.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:45.860Z,1478652705.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:46.041Z,1478652706.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:46.264Z,1478652706.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:46.433Z,1478652706.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:46.833Z,1478652706.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:47.060Z,1478652707.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:47.233Z,1478652707.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:47.633Z,1478652707.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:47.856Z,1478652707.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:48.041Z,1478652708.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:48.264Z,1478652708.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:48.437Z,1478652708.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:48.833Z,1478652708.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:49.062Z,1478652709.062 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:49.237Z,1478652709.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:49.638Z,1478652709.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:49.856Z,1478652709.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:50.045Z,1478652710.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:50.264Z,1478652710.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:50.443Z,1478652710.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:50.840Z,1478652710.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:51.060Z,1478652711.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:51.233Z,1478652711.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:51.856Z,1478652711.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:52.260Z,1478652712.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:53.056Z,1478652713.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:53.852Z,1478652713.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:54.256Z,1478652714.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:54.804Z,1478652714.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:54.869Z,1478652714.869 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:51:54.869Z,1478652714.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2016-11-09T00:51:54.869Z,1478652714.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:51:54.871Z,1478652714.871 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:51:54.871Z,1478652714.871 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2016-11-09T00:51:54.872Z,1478652714.872 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:51:54.897Z,1478652714.897 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:51:54.897Z,1478652714.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:51:54.963Z,1478652714.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:55.052Z,1478652715.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:55.065Z,1478652715.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:51:55.066Z,1478652715.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2016-11-09T00:51:55.066Z,1478652715.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:51:55.066Z,1478652715.066 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2016-11-09T00:51:55.337Z,1478652715.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:55.394Z,1478652715.394 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:51:55.395Z,1478652715.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:51:55.395Z,1478652715.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:51:55.396Z,1478652715.396 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:51:55.396Z,1478652715.396 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:51:55.396Z,1478652715.396 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:51:55.737Z,1478652715.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:55.848Z,1478652715.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:56.137Z,1478652716.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:56.252Z,1478652716.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:56.537Z,1478652716.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:56.938Z,1478652716.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:57.048Z,1478652717.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:57.343Z,1478652717.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:57.749Z,1478652717.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:57.844Z,1478652717.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:58.137Z,1478652718.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:58.252Z,1478652718.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:58.537Z,1478652718.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:58.937Z,1478652718.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:59.048Z,1478652719.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:59.343Z,1478652719.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:59.742Z,1478652719.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:51:59.844Z,1478652719.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:00.149Z,1478652720.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:00.248Z,1478652720.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:00.544Z,1478652720.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:00.944Z,1478652720.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:01.044Z,1478652721.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:01.343Z,1478652721.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:01.744Z,1478652721.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:01.840Z,1478652721.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:02.148Z,1478652722.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:02.244Z,1478652722.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:02.541Z,1478652722.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:02.938Z,1478652722.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:03.040Z,1478652723.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:03.341Z,1478652723.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:03.745Z,1478652723.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:03.836Z,1478652723.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:04.137Z,1478652724.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:04.240Z,1478652724.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:04.537Z,1478652724.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:04.941Z,1478652724.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:05.036Z,1478652725.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:05.344Z,1478652725.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:05.744Z,1478652725.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:05.832Z,1478652725.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:06.152Z,1478652726.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:06.236Z,1478652726.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:06.537Z,1478652726.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:06.937Z,1478652726.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:07.032Z,1478652727.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:07.341Z,1478652727.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:07.737Z,1478652727.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:07.828Z,1478652727.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:08.144Z,1478652728.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:08.232Z,1478652728.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:08.545Z,1478652728.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:08.945Z,1478652728.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:09.028Z,1478652729.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:09.345Z,1478652729.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:09.752Z,1478652729.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:09.824Z,1478652729.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:10.137Z,1478652730.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:10.228Z,1478652730.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:10.537Z,1478652730.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:10.941Z,1478652730.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:11.024Z,1478652731.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:11.337Z,1478652731.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:11.737Z,1478652731.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:11.820Z,1478652731.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:12.145Z,1478652732.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:12.224Z,1478652732.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:12.537Z,1478652732.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:12.937Z,1478652732.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:13.020Z,1478652733.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:13.345Z,1478652733.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:13.737Z,1478652733.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:13.825Z,1478652733.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:14.141Z,1478652734.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:14.232Z,1478652734.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:14.538Z,1478652734.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:14.946Z,1478652734.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:15.028Z,1478652735.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:15.347Z,1478652735.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:15.745Z,1478652735.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:15.824Z,1478652735.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:16.144Z,1478652736.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:16.228Z,1478652736.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:16.545Z,1478652736.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:16.938Z,1478652736.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:17.024Z,1478652737.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:17.341Z,1478652737.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:17.737Z,1478652737.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:17.820Z,1478652737.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:18.137Z,1478652738.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:18.224Z,1478652738.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:18.540Z,1478652738.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:18.945Z,1478652738.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:19.020Z,1478652739.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:19.344Z,1478652739.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:19.744Z,1478652739.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:19.818Z,1478652739.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:20.144Z,1478652740.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:20.224Z,1478652740.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:20.544Z,1478652740.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:20.944Z,1478652740.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:21.020Z,1478652741.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:21.337Z,1478652741.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:21.742Z,1478652741.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:21.818Z,1478652741.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:22.149Z,1478652742.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:22.224Z,1478652742.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:22.543Z,1478652742.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:22.944Z,1478652742.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:23.020Z,1478652743.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:23.344Z,1478652743.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:23.737Z,1478652743.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:23.818Z,1478652743.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:24.137Z,1478652744.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:24.224Z,1478652744.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:24.537Z,1478652744.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:24.937Z,1478652744.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:25.020Z,1478652745.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:25.337Z,1478652745.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:25.743Z,1478652745.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:25.853Z,1478652745.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:26.148Z,1478652746.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:26.256Z,1478652746.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:26.544Z,1478652746.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:26.944Z,1478652746.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:27.052Z,1478652747.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:27.337Z,1478652747.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:27.737Z,1478652747.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:27.848Z,1478652747.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:28.145Z,1478652748.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:28.252Z,1478652748.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:28.537Z,1478652748.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:28.940Z,1478652748.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:29.048Z,1478652749.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:29.337Z,1478652749.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:29.737Z,1478652749.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:29.844Z,1478652749.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:30.149Z,1478652750.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:30.252Z,1478652750.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:30.544Z,1478652750.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:30.944Z,1478652750.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:31.048Z,1478652751.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:31.345Z,1478652751.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:31.756Z,1478652751.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:31.844Z,1478652751.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:32.137Z,1478652752.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:32.252Z,1478652752.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:32.537Z,1478652752.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:32.937Z,1478652752.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:33.048Z,1478652753.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:33.337Z,1478652753.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:33.737Z,1478652753.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:33.844Z,1478652753.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:34.149Z,1478652754.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:34.248Z,1478652754.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:34.543Z,1478652754.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:34.945Z,1478652754.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:35.044Z,1478652755.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:35.350Z,1478652755.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:35.737Z,1478652755.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:35.840Z,1478652755.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:36.137Z,1478652756.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:36.244Z,1478652756.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:36.537Z,1478652756.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:36.937Z,1478652756.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:37.040Z,1478652757.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:37.337Z,1478652757.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:37.749Z,1478652757.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:37.836Z,1478652757.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:38.144Z,1478652758.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:38.240Z,1478652758.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:38.555Z,1478652758.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:38.943Z,1478652758.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:39.036Z,1478652759.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:39.344Z,1478652759.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:39.737Z,1478652759.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:39.832Z,1478652759.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:40.141Z,1478652760.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:40.236Z,1478652760.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:40.537Z,1478652760.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:40.937Z,1478652760.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:41.032Z,1478652761.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:41.341Z,1478652761.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:41.737Z,1478652761.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:41.828Z,1478652761.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:42.137Z,1478652762.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:42.232Z,1478652762.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:42.549Z,1478652762.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:42.937Z,1478652762.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:43.028Z,1478652763.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:43.337Z,1478652763.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:43.824Z,1478652763.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:44.228Z,1478652764.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:44.938Z,1478652764.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:45.024Z,1478652765.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:45.337Z,1478652765.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:45.745Z,1478652765.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:45.820Z,1478652765.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:46.224Z,1478652766.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:47.020Z,1478652767.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:47.341Z,1478652767.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:47.737Z,1478652767.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:47.824Z,1478652767.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:48.141Z,1478652768.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:48.228Z,1478652768.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:48.541Z,1478652768.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:48.941Z,1478652768.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:49.024Z,1478652769.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:49.342Z,1478652769.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:49.737Z,1478652769.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:49.820Z,1478652769.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:50.137Z,1478652770.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:50.183Z,1478652770.183 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-09T00:52:50.188Z,1478652770.188 [Default:CheckIn:C.Wait] Stopped
2016-11-09T00:52:50.188Z,1478652770.188 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-09T00:52:50.188Z,1478652770.188 [Default:CheckIn:D] Running Loop=1
2016-11-09T00:52:50.224Z,1478652770.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:50.541Z,1478652770.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:50.589Z,1478652770.589 [Default:CheckIn:D] Stopped
2016-11-09T00:52:50.589Z,1478652770.589 [Default:CheckIn:E] Running Loop=1
2016-11-09T00:52:50.937Z,1478652770.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:51.008Z,1478652771.008 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 9.322345 min 
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn:E] Stopped
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn] Stopped
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn](INFO): Running loop #2
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn] Running Loop=2
2016-11-09T00:52:51.010Z,1478652771.010 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-09T00:52:51.011Z,1478652771.011 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-09T00:52:51.020Z,1478652771.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:51.341Z,1478652771.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:51.818Z,1478652771.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:52.224Z,1478652772.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:53.020Z,1478652773.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:53.818Z,1478652773.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:54.059Z,1478652774.059 [CommandLine](IMPORTANT): got command failComponent
2016-11-09T00:52:54.059Z,1478652774.059 [CommandLine](IMPORTANT): Failed components:
2016-11-09T00:52:54.059Z,1478652774.059 [CommandLine](IMPORTANT): No failed Components.
2016-11-09T00:52:54.224Z,1478652774.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:54.742Z,1478652774.741 [NAL9602](INFO): Powering up
2016-11-09T00:52:54.758Z,1478652774.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:54.912Z,1478652774.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:55.020Z,1478652775.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:55.293Z,1478652775.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:55.693Z,1478652775.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:55.820Z,1478652775.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:56.101Z,1478652776.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:56.224Z,1478652776.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:56.496Z,1478652776.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:56.906Z,1478652776.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:57.021Z,1478652777.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:57.299Z,1478652777.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:57.693Z,1478652777.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:57.818Z,1478652777.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:58.224Z,1478652778.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:59.020Z,1478652779.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:52:59.816Z,1478652779.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:00.221Z,1478652780.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:01.016Z,1478652781.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:01.813Z,1478652781.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:02.220Z,1478652782.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:03.016Z,1478652783.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:03.813Z,1478652783.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:04.220Z,1478652784.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:05.016Z,1478652785.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:05.677Z,1478652785.677 [NAL9602](INFO): NAL9602 initialized
2016-11-09T00:53:05.812Z,1478652785.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:06.216Z,1478652786.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:07.012Z,1478652787.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:07.808Z,1478652787.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:08.212Z,1478652788.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:09.008Z,1478652789.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:09.805Z,1478652789.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:10.212Z,1478652790.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:11.009Z,1478652791.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:11.804Z,1478652791.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:12.212Z,1478652792.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:13.008Z,1478652793.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:13.805Z,1478652793.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:14.212Z,1478652794.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:15.008Z,1478652795.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:15.805Z,1478652795.805 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:16.212Z,1478652796.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:17.009Z,1478652797.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:17.804Z,1478652797.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:18.208Z,1478652798.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:19.004Z,1478652799.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:19.800Z,1478652799.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:20.204Z,1478652800.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:21.000Z,1478652801.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:21.710Z,1478652801.710 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-09T00:53:21.710Z,1478652801.710 [BPC1] Data Fault, FailCount= 1
2016-11-09T00:53:21.710Z,1478652801.710 [BPC1](ERROR): Data Fault
2016-11-09T00:53:21.772Z,1478652801.772 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T00:53:21.796Z,1478652801.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:22.200Z,1478652802.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:22.957Z,1478652802.957 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:53:22.957Z,1478652802.957 [BPC1] No Fault, FailCount= 1
2016-11-09T00:53:22.996Z,1478652802.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:23.793Z,1478652803.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:24.200Z,1478652804.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:24.997Z,1478652804.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:25.792Z,1478652805.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:26.196Z,1478652806.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:26.992Z,1478652806.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:27.788Z,1478652807.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:28.193Z,1478652808.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:28.988Z,1478652808.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:29.784Z,1478652809.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:30.188Z,1478652810.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:30.984Z,1478652810.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:31.781Z,1478652811.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:32.188Z,1478652812.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:32.985Z,1478652812.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:33.780Z,1478652813.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:34.184Z,1478652814.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:34.980Z,1478652814.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:35.776Z,1478652815.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:36.181Z,1478652816.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:36.977Z,1478652816.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:37.677Z,1478652817.677 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2016-11-09T00:53:37.751Z,1478652817.751 [NAL9602](FAULT): received: 
+CSQ:0

OK
2016-11-09T00:53:37.752Z,1478652817.751 [NAL9602] Data Fault, FailCount= 1
2016-11-09T00:53:37.752Z,1478652817.751 [NAL9602](ERROR): Data Fault
2016-11-09T00:53:37.774Z,1478652817.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:37.871Z,1478652817.871 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-09T00:53:38.077Z,1478652818.077 [NAL9602](INFO): Powering down
2016-11-09T00:53:38.180Z,1478652818.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:38.976Z,1478652818.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:38.981Z,1478652818.981 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-09T00:53:38.982Z,1478652818.981 [NAL9602] No Fault, FailCount= 1
2016-11-09T00:53:39.772Z,1478652819.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:40.180Z,1478652820.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:40.977Z,1478652820.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:41.772Z,1478652821.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:42.176Z,1478652822.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:42.972Z,1478652822.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:43.277Z,1478652823.277 [NAL9602](INFO): Powering up NAL9602
2016-11-09T00:53:43.768Z,1478652823.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:44.173Z,1478652824.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:44.968Z,1478652824.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:45.765Z,1478652825.765 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:46.172Z,1478652826.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:46.968Z,1478652826.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:47.764Z,1478652827.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:48.168Z,1478652828.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:48.964Z,1478652828.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:49.760Z,1478652829.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:50.164Z,1478652830.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:50.960Z,1478652830.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:51.756Z,1478652831.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:52.161Z,1478652832.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:52.956Z,1478652832.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:53.755Z,1478652833.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:54.164Z,1478652834.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:54.961Z,1478652834.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:55.566Z,1478652835.566 [NAL9602](INFO): NAL9602 initialized
2016-11-09T00:53:55.756Z,1478652835.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:56.160Z,1478652836.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:56.956Z,1478652836.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:57.752Z,1478652837.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:58.549Z,1478652838.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:59.344Z,1478652839.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:53:59.748Z,1478652839.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:00.544Z,1478652840.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:01.340Z,1478652841.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:01.744Z,1478652841.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:02.540Z,1478652842.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:03.337Z,1478652843.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:03.744Z,1478652843.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:04.540Z,1478652844.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:05.336Z,1478652845.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:05.740Z,1478652845.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:06.539Z,1478652846.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:07.332Z,1478652847.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:07.736Z,1478652847.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:08.532Z,1478652848.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:09.328Z,1478652849.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:09.733Z,1478652849.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:10.531Z,1478652850.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:11.329Z,1478652851.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:11.736Z,1478652851.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:12.533Z,1478652852.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:13.328Z,1478652853.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:13.732Z,1478652853.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:14.528Z,1478652854.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:15.324Z,1478652855.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:15.729Z,1478652855.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:16.524Z,1478652856.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:17.320Z,1478652857.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:17.728Z,1478652857.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:18.524Z,1478652858.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:19.320Z,1478652859.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:19.732Z,1478652859.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:20.528Z,1478652860.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:21.324Z,1478652861.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:21.728Z,1478652861.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:22.524Z,1478652862.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:23.320Z,1478652863.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:23.730Z,1478652863.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:24.524Z,1478652864.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:25.324Z,1478652865.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:25.732Z,1478652865.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:26.528Z,1478652866.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:27.324Z,1478652867.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:27.728Z,1478652867.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:28.524Z,1478652868.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:29.320Z,1478652869.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:29.724Z,1478652869.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:30.520Z,1478652870.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:31.316Z,1478652871.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:31.720Z,1478652871.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:32.516Z,1478652872.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:33.312Z,1478652873.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:33.720Z,1478652873.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:34.516Z,1478652874.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:34.785Z,1478652874.785 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-09T00:54:34.785Z,1478652874.785 [BPC1] Data Fault, FailCount= 1
2016-11-09T00:54:34.785Z,1478652874.786 [BPC1](ERROR): Data Fault
2016-11-09T00:54:34.908Z,1478652874.908 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T00:54:35.312Z,1478652875.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:35.716Z,1478652875.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:36.047Z,1478652876.046 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:54:36.047Z,1478652876.047 [BPC1] No Fault, FailCount= 1
2016-11-09T00:54:36.512Z,1478652876.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:37.308Z,1478652877.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:37.712Z,1478652877.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:38.508Z,1478652878.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:39.304Z,1478652879.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:39.708Z,1478652879.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:40.504Z,1478652880.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:41.300Z,1478652881.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:41.708Z,1478652881.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:42.504Z,1478652882.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:43.301Z,1478652883.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:43.704Z,1478652883.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:44.500Z,1478652884.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:45.297Z,1478652885.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:45.700Z,1478652885.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:46.496Z,1478652886.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:47.293Z,1478652887.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:47.704Z,1478652887.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:48.501Z,1478652888.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:49.296Z,1478652889.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:49.720Z,1478652889.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:50.517Z,1478652890.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:51.312Z,1478652891.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:51.716Z,1478652891.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:52.512Z,1478652892.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:53.308Z,1478652893.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:53.716Z,1478652893.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:54.512Z,1478652894.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:55.308Z,1478652895.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:55.554Z,1478652895.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:54:55.554Z,1478652895.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2016-11-09T00:54:55.554Z,1478652895.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:54:55.556Z,1478652895.556 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:54:55.556Z,1478652895.556 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2016-11-09T00:54:55.556Z,1478652895.556 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:54:55.570Z,1478652895.570 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:54:55.571Z,1478652895.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:54:55.716Z,1478652895.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:55.738Z,1478652895.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:54:55.738Z,1478652895.738 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2016-11-09T00:54:55.738Z,1478652895.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:54:55.739Z,1478652895.739 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2016-11-09T00:54:56.072Z,1478652896.072 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:54:56.073Z,1478652896.073 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:54:56.073Z,1478652896.073 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:54:56.073Z,1478652896.073 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:54:56.074Z,1478652896.074 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:54:56.074Z,1478652896.074 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:54:56.512Z,1478652896.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:57.308Z,1478652897.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:57.717Z,1478652897.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:58.512Z,1478652898.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:59.308Z,1478652899.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:54:59.716Z,1478652899.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:00.512Z,1478652900.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:01.308Z,1478652901.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:01.712Z,1478652901.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:02.508Z,1478652902.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:03.304Z,1478652903.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:03.724Z,1478652903.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:04.520Z,1478652904.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:05.316Z,1478652905.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:05.720Z,1478652905.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:06.516Z,1478652906.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:07.312Z,1478652907.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:07.716Z,1478652907.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:08.512Z,1478652908.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:09.308Z,1478652909.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:09.712Z,1478652909.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:10.508Z,1478652910.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:11.304Z,1478652911.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:11.708Z,1478652911.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:12.504Z,1478652912.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:13.300Z,1478652913.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:13.704Z,1478652913.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:14.500Z,1478652914.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:15.296Z,1478652915.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:15.700Z,1478652915.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:16.019Z,1478652916.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x25849 got:0x6591
2016-11-09T00:55:16.496Z,1478652916.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:17.300Z,1478652917.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:17.704Z,1478652917.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:18.500Z,1478652918.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:19.296Z,1478652919.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:19.700Z,1478652919.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:20.496Z,1478652920.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:21.292Z,1478652921.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:21.696Z,1478652921.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:22.492Z,1478652922.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:23.288Z,1478652923.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:23.712Z,1478652923.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:24.508Z,1478652924.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:25.304Z,1478652925.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:25.708Z,1478652925.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:26.504Z,1478652926.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:27.301Z,1478652927.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:27.704Z,1478652927.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:28.500Z,1478652928.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:29.297Z,1478652929.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:29.700Z,1478652929.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:30.496Z,1478652930.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:31.219Z,1478652931.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x19843 got:0x61981
2016-11-09T00:55:31.292Z,1478652931.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:31.696Z,1478652931.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:32.492Z,1478652932.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:33.288Z,1478652933.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:33.692Z,1478652933.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:34.488Z,1478652934.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:35.284Z,1478652935.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:35.688Z,1478652935.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:36.484Z,1478652936.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:37.280Z,1478652937.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:37.684Z,1478652937.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:38.480Z,1478652938.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:39.276Z,1478652939.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:39.700Z,1478652939.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:40.496Z,1478652940.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:41.292Z,1478652941.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:41.696Z,1478652941.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:42.492Z,1478652942.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:43.288Z,1478652943.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:43.692Z,1478652943.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:44.488Z,1478652944.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:45.284Z,1478652945.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:45.692Z,1478652945.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:46.488Z,1478652946.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:47.284Z,1478652947.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:47.692Z,1478652947.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:48.488Z,1478652948.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:49.284Z,1478652949.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:49.692Z,1478652949.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:50.488Z,1478652950.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:51.284Z,1478652951.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:51.692Z,1478652951.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:52.488Z,1478652952.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:53.284Z,1478652953.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:53.688Z,1478652953.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:54.484Z,1478652954.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:55.280Z,1478652955.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:55.684Z,1478652955.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:56.480Z,1478652956.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:57.276Z,1478652957.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:57.684Z,1478652957.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:58.480Z,1478652958.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:59.276Z,1478652959.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:55:59.684Z,1478652959.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:00.480Z,1478652960.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:01.276Z,1478652961.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:01.680Z,1478652961.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:02.476Z,1478652962.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:03.272Z,1478652963.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:03.676Z,1478652963.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:04.476Z,1478652964.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:05.272Z,1478652965.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:05.676Z,1478652965.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:06.472Z,1478652966.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:07.268Z,1478652967.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:07.672Z,1478652967.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:56:17.358Z,1478652977.358 [BPC1](ERROR): Failed to receive battery data
2016-11-09T00:56:17.358Z,1478652977.358 [BPC1] Communications Fault, FailCount= 1
2016-11-09T00:56:17.358Z,1478652977.358 [BPC1](ERROR): Communications Fault
2016-11-09T00:56:17.432Z,1478652977.432 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T00:56:18.618Z,1478652978.618 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:56:18.618Z,1478652978.618 [BPC1] No Fault, FailCount= 1
2016-11-09T00:57:51.321Z,1478653071.321 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-09T00:52:51.0Z
2016-11-09T00:57:51.322Z,1478653071.322 [Default:CheckIn:Read_GPS] Stopped
2016-11-09T00:57:51.322Z,1478653071.322 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-09T00:57:56.641Z,1478653076.641 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:57:56.641Z,1478653076.641 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2016-11-09T00:57:56.641Z,1478653076.641 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T00:57:56.652Z,1478653076.652 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T00:57:56.652Z,1478653076.652 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2016-11-09T00:57:56.652Z,1478653076.652 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T00:57:56.688Z,1478653076.688 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T00:57:56.688Z,1478653076.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T00:57:56.706Z,1478653076.706 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20161109T003936/Courier0008.lzma
2016-11-09T00:57:56.814Z,1478653076.814 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T00:57:56.814Z,1478653076.814 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2016-11-09T00:57:56.814Z,1478653076.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T00:57:56.815Z,1478653076.815 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2016-11-09T00:57:57.172Z,1478653077.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T00:57:57.172Z,1478653077.172 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:57:57.172Z,1478653077.172 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:57:57.173Z,1478653077.173 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T00:57:57.173Z,1478653077.173 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T00:57:57.174Z,1478653077.174 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T00:57:57.497Z,1478653077.497 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Courier0008.lzma.bak
2016-11-09T00:57:57.497Z,1478653077.497 [DataOverHttps](INFO): SBD MOMSN=4553006
2016-11-09T00:58:09.745Z,1478653089.745 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-09T00:58:10.251Z,1478653090.251 [DataOverHttps](INFO): Sending 1839 bytes from file Logs/20161109T003936/Express0009.lzma
2016-11-09T00:58:26.995Z,1478653106.995 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Express0009.lzma.bak
2016-11-09T00:58:26.995Z,1478653106.995 [DataOverHttps](INFO): SBD MOMSN=4553008
2016-11-09T00:58:27.005Z,1478653107.005 [NAL9602](INFO): Powering down
2016-11-09T00:58:27.036Z,1478653107.036 [BPC1](ERROR): Failed to receive battery data
2016-11-09T00:58:27.036Z,1478653107.036 [BPC1] Communications Fault, FailCount= 1
2016-11-09T00:58:27.036Z,1478653107.036 [BPC1](ERROR): Communications Fault
2016-11-09T00:58:27.068Z,1478653107.068 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T00:58:30.106Z,1478653110.106 [Default:CheckIn:Read_Iridium] Stopped
2016-11-09T00:58:30.106Z,1478653110.106 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-09T00:58:30.106Z,1478653110.106 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-09T00:58:33.701Z,1478653113.701 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T00:58:33.701Z,1478653113.701 [BPC1] No Fault, FailCount= 1
2016-11-09T00:59:47.154Z,1478653187.154 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-09T00:59:48.864Z,1478653188.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T00:59:49.660Z,1478653189.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:00:34.063Z,1478653234.063 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:00:34.063Z,1478653234.063 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:00:34.064Z,1478653234.063 [BPC1](ERROR): Communications Fault
2016-11-09T01:00:34.155Z,1478653234.155 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:00:35.031Z,1478653235.031 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:00:35.031Z,1478653235.031 [BPC1] No Fault, FailCount= 1
2016-11-09T01:00:57.421Z,1478653257.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:00:57.421Z,1478653257.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2016-11-09T01:00:57.421Z,1478653257.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T01:00:57.424Z,1478653257.424 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:00:57.424Z,1478653257.424 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2016-11-09T01:00:57.424Z,1478653257.424 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T01:00:57.459Z,1478653257.459 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T01:00:57.459Z,1478653257.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T01:00:57.828Z,1478653257.828 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T01:00:57.828Z,1478653257.828 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2016-11-09T01:00:57.828Z,1478653257.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T01:00:57.828Z,1478653257.829 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2016-11-09T01:00:58.221Z,1478653258.221 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T01:00:58.222Z,1478653258.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:00:58.222Z,1478653258.222 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:00:58.223Z,1478653258.223 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T01:00:58.223Z,1478653258.223 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:00:58.224Z,1478653258.224 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:01:48.107Z,1478653308.107 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-09T01:01:48.108Z,1478653308.108 [Rowe_600LCM] Communications Fault, FailCount= 2
2016-11-09T01:01:48.108Z,1478653308.108 [Rowe_600LCM](ERROR): Communications Fault
2016-11-09T01:01:48.173Z,1478653308.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-09T01:01:48.221Z,1478653308.221 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-09T01:01:48.511Z,1478653308.511 [Rowe_600LCM](INFO): Powering down
2016-11-09T01:01:48.580Z,1478653308.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-09T01:01:48.960Z,1478653308.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-09T01:01:49.385Z,1478653309.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-09T01:01:49.751Z,1478653309.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-09T01:01:49.799Z,1478653309.799 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-09T01:01:49.799Z,1478653309.799 [Rowe_600LCM] No Fault, FailCount= 2
2016-11-09T01:01:50.127Z,1478653310.127 [Rowe_600LCM](INFO): Initializing
2016-11-09T01:01:50.128Z,1478653310.128 [Rowe_600LCM](INFO): Checking LCM
2016-11-09T01:01:50.128Z,1478653310.128 [Rowe_600LCM](INFO): LCM OK
2016-11-09T01:01:50.128Z,1478653310.128 [Rowe_600LCM](INFO): Powering up
2016-11-09T01:01:50.195Z,1478653310.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-09T01:01:50.563Z,1478653310.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-09T01:01:50.977Z,1478653310.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-09T01:01:51.377Z,1478653311.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-09T01:01:51.767Z,1478653311.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-09T01:01:52.173Z,1478653312.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-09T01:01:52.544Z,1478653312.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-09T01:01:52.977Z,1478653312.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-09T01:01:53.370Z,1478653313.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-09T01:01:53.748Z,1478653313.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-09T01:01:54.161Z,1478653314.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-09T01:01:54.331Z,1478653314.331 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-09T01:01:54.399Z,1478653314.399 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-09T01:01:54.400Z,1478653314.400 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-09T01:01:54.401Z,1478653314.401 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-09T01:01:54.402Z,1478653314.402 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-09T01:01:54.558Z,1478653314.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-09T01:02:15.543Z,1478653335.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:02:16.338Z,1478653336.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:02:25.342Z,1478653345.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x26883 got:0x47936
2016-11-09T01:02:26.553Z,1478653346.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x9002 got:0x16961
2016-11-09T01:02:30.143Z,1478653350.143 [PNI_TCM](ERROR): CRC does not match. Expected:0x58026 got:0x10011
2016-11-09T01:03:13.240Z,1478653393.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:14.036Z,1478653394.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:21.200Z,1478653401.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:21.996Z,1478653401.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:29.176Z,1478653409.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:29.972Z,1478653409.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:30.389Z,1478653410.389 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-09T01:03:30.390Z,1478653410.390 [Default:CheckIn:C.Wait] Stopped
2016-11-09T01:03:30.390Z,1478653410.390 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-09T01:03:30.390Z,1478653410.390 [Default:CheckIn:D] Running Loop=1
2016-11-09T01:03:30.826Z,1478653410.826 [Default:CheckIn:D] Stopped
2016-11-09T01:03:30.826Z,1478653410.826 [Default:CheckIn:E] Running Loop=1
2016-11-09T01:03:31.315Z,1478653411.315 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 19.992997 min 
2016-11-09T01:03:31.315Z,1478653411.315 [Default:CheckIn:E] Stopped
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn] Stopped
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn](INFO): Running loop #3
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn] Running Loop=3
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-09T01:03:31.316Z,1478653411.316 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-09T01:03:36.700Z,1478653416.700 [NAL9602](INFO): Powering up
2016-11-09T01:03:37.180Z,1478653417.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:37.976Z,1478653417.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:45.160Z,1478653425.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:45.956Z,1478653425.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:47.601Z,1478653427.601 [NAL9602](INFO): NAL9602 initialized
2016-11-09T01:03:48.422Z,1478653428.422 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-09T01:03:48.423Z,1478653428.422 [NAL9602] Data Fault, FailCount= 2
2016-11-09T01:03:48.423Z,1478653428.423 [NAL9602](ERROR): Data Fault
2016-11-09T01:03:48.594Z,1478653428.594 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-09T01:03:48.809Z,1478653428.809 [NAL9602](INFO): Powering down
2016-11-09T01:03:49.681Z,1478653429.681 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-09T01:03:49.681Z,1478653429.681 [NAL9602] No Fault, FailCount= 2
2016-11-09T01:03:53.120Z,1478653433.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:53.916Z,1478653433.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:03:54.001Z,1478653434.001 [NAL9602](INFO): Powering up NAL9602
2016-11-09T01:03:58.456Z,1478653438.456 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:03:58.456Z,1478653438.456 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2016-11-09T01:03:58.456Z,1478653438.456 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T01:03:58.458Z,1478653438.458 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:03:58.458Z,1478653438.458 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2016-11-09T01:03:58.458Z,1478653438.458 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T01:03:58.485Z,1478653438.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T01:03:58.485Z,1478653438.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T01:03:58.883Z,1478653438.884 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T01:03:58.884Z,1478653438.884 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2016-11-09T01:03:58.884Z,1478653438.884 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T01:03:58.884Z,1478653438.884 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2016-11-09T01:03:59.262Z,1478653439.261 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T01:03:59.262Z,1478653439.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:03:59.262Z,1478653439.262 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:03:59.263Z,1478653439.263 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T01:03:59.263Z,1478653439.263 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:03:59.264Z,1478653439.264 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:04:01.080Z,1478653441.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:04:01.876Z,1478653441.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:04:05.213Z,1478653445.213 [NAL9602](INFO): NAL9602 initialized
2016-11-09T01:05:02.815Z,1478653502.815 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2016-11-09T01:05:02.815Z,1478653502.815 [Rowe_600LCM] Communications Fault, FailCount= 3
2016-11-09T01:05:02.815Z,1478653502.815 [Rowe_600LCM](ERROR): Communications Fault
2016-11-09T01:05:02.891Z,1478653502.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2016-11-09T01:05:02.938Z,1478653502.938 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2016-11-09T01:05:03.219Z,1478653503.219 [Rowe_600LCM](INFO): Powering down
2016-11-09T01:05:03.293Z,1478653503.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2016-11-09T01:05:03.705Z,1478653503.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2016-11-09T01:05:04.061Z,1478653504.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2016-11-09T01:05:04.493Z,1478653504.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2016-11-09T01:05:04.514Z,1478653504.514 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2016-11-09T01:05:04.514Z,1478653504.514 [Rowe_600LCM] No Fault, FailCount= 3
2016-11-09T01:05:04.835Z,1478653504.835 [Rowe_600LCM](INFO): Initializing
2016-11-09T01:05:04.836Z,1478653504.836 [Rowe_600LCM](INFO): Checking LCM
2016-11-09T01:05:04.836Z,1478653504.836 [Rowe_600LCM](INFO): LCM OK
2016-11-09T01:05:04.836Z,1478653504.836 [Rowe_600LCM](INFO): Powering up
2016-11-09T01:05:04.864Z,1478653504.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2016-11-09T01:05:05.297Z,1478653505.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2016-11-09T01:05:05.664Z,1478653505.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2016-11-09T01:05:06.099Z,1478653506.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2016-11-09T01:05:06.470Z,1478653506.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2016-11-09T01:05:06.873Z,1478653506.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2016-11-09T01:05:07.265Z,1478653507.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2016-11-09T01:05:07.675Z,1478653507.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2016-11-09T01:05:08.073Z,1478653508.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2016-11-09T01:05:08.475Z,1478653508.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2016-11-09T01:05:08.874Z,1478653508.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2016-11-09T01:05:09.043Z,1478653509.043 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2016-11-09T01:05:09.103Z,1478653509.103 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2016-11-09T01:05:09.104Z,1478653509.104 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2016-11-09T01:05:09.105Z,1478653509.105 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2016-11-09T01:05:09.106Z,1478653509.106 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.rowe_dvl
2016-11-09T01:05:09.297Z,1478653509.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2016-11-09T01:05:51.938Z,1478653551.938 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:05:51.938Z,1478653551.938 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:05:51.938Z,1478653551.938 [BPC1](ERROR): Communications Fault
2016-11-09T01:05:52.008Z,1478653552.008 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:05:53.244Z,1478653553.244 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:05:53.244Z,1478653553.244 [BPC1] No Fault, FailCount= 1
2016-11-09T01:05:56.448Z,1478653556.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:05:57.244Z,1478653557.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:05:57.656Z,1478653557.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:05:58.452Z,1478653558.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:05:59.248Z,1478653559.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:05:59.652Z,1478653559.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:00.448Z,1478653560.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:01.244Z,1478653561.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:01.664Z,1478653561.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:02.460Z,1478653562.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:03.256Z,1478653563.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:03.660Z,1478653563.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:05.114Z,1478653565.114 [NAL9602](INFO): SBD MO Status=2, MOMSN=293, MT Status=2, MTMSN=0
2016-11-09T01:06:05.115Z,1478653565.115 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2016-11-09T01:06:10.444Z,1478653570.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:11.240Z,1478653571.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:11.648Z,1478653571.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:12.346Z,1478653572.346 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:06:12.346Z,1478653572.346 [BPC1] Communications Fault, FailCount= 2
2016-11-09T01:06:12.346Z,1478653572.346 [BPC1](ERROR): Communications Fault
2016-11-09T01:06:12.376Z,1478653572.376 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:06:12.444Z,1478653572.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:13.240Z,1478653573.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:13.602Z,1478653573.602 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:06:13.603Z,1478653573.602 [BPC1] No Fault, FailCount= 2
2016-11-09T01:06:13.648Z,1478653573.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:14.444Z,1478653574.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:15.240Z,1478653575.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:15.648Z,1478653575.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:16.444Z,1478653576.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:17.240Z,1478653577.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:17.644Z,1478653577.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:18.440Z,1478653578.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:19.236Z,1478653579.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:19.640Z,1478653579.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:20.436Z,1478653580.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:21.240Z,1478653581.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:21.644Z,1478653581.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:22.440Z,1478653582.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:23.236Z,1478653583.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:23.640Z,1478653583.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:24.436Z,1478653584.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:25.232Z,1478653585.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:25.636Z,1478653585.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:26.432Z,1478653586.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:27.228Z,1478653587.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:27.632Z,1478653587.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:06:59.609Z,1478653619.609 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:06:59.610Z,1478653619.610 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2016-11-09T01:06:59.610Z,1478653619.610 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T01:06:59.616Z,1478653619.616 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:06:59.616Z,1478653619.616 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 8
2016-11-09T01:06:59.616Z,1478653619.616 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T01:06:59.643Z,1478653619.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T01:06:59.651Z,1478653619.651 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T01:07:00.038Z,1478653620.039 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T01:07:00.039Z,1478653620.039 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2016-11-09T01:07:00.043Z,1478653620.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T01:07:00.044Z,1478653620.044 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 8
2016-11-09T01:07:00.406Z,1478653620.406 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T01:07:00.406Z,1478653620.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:07:00.406Z,1478653620.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:07:00.407Z,1478653620.407 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T01:07:00.407Z,1478653620.407 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:07:00.408Z,1478653620.408 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:08:13.721Z,1478653693.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:14.516Z,1478653694.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:14.920Z,1478653694.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:15.716Z,1478653695.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:16.512Z,1478653696.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:16.917Z,1478653696.917 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:17.715Z,1478653697.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:18.508Z,1478653698.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:19.052Z,1478653699.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:19.848Z,1478653699.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:20.644Z,1478653700.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:21.440Z,1478653701.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:21.844Z,1478653701.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:22.640Z,1478653702.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:23.436Z,1478653703.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:23.840Z,1478653703.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:24.137Z,1478653704.136 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:08:24.137Z,1478653704.137 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:08:24.137Z,1478653704.137 [BPC1](ERROR): Communications Fault
2016-11-09T01:08:24.203Z,1478653704.203 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:08:24.636Z,1478653704.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:25.040Z,1478653705.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:25.402Z,1478653705.402 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:08:25.402Z,1478653705.402 [BPC1] No Fault, FailCount= 1
2016-11-09T01:08:25.836Z,1478653705.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:26.632Z,1478653706.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:27.036Z,1478653707.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:27.833Z,1478653707.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:28.628Z,1478653708.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:29.032Z,1478653709.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:29.828Z,1478653709.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:30.624Z,1478653710.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:31.028Z,1478653711.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:31.361Z,1478653711.361 [Default:CheckIn:Read_GPS](INFO): Timed out from 2016-11-09T01:03:31.3Z
2016-11-09T01:08:31.361Z,1478653711.361 [Default:CheckIn:Read_GPS] Stopped
2016-11-09T01:08:31.361Z,1478653711.361 [Default:CheckIn:Read_Iridium] Running Loop=1
2016-11-09T01:08:31.824Z,1478653711.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:32.620Z,1478653712.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:33.060Z,1478653713.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:33.856Z,1478653713.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:34.652Z,1478653714.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:35.416Z,1478653715.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:35.880Z,1478653715.880 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20161109T003936/Courier0012.lzma
2016-11-09T01:08:36.212Z,1478653716.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:36.681Z,1478653716.681 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Courier0012.lzma.bak
2016-11-09T01:08:36.681Z,1478653716.681 [DataOverHttps](INFO): SBD MOMSN=4553054
2016-11-09T01:08:37.008Z,1478653717.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:37.412Z,1478653717.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:38.208Z,1478653718.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:38.912Z,1478653718.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:39.708Z,1478653719.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:40.504Z,1478653720.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:41.052Z,1478653721.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:41.848Z,1478653721.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:42.644Z,1478653722.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:43.048Z,1478653723.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:43.844Z,1478653723.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:44.640Z,1478653724.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:45.044Z,1478653725.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:45.840Z,1478653725.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:46.636Z,1478653726.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:47.040Z,1478653727.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:47.506Z,1478653727.506 [DataOverHttps](INFO): Sending 755 bytes from file Logs/20161109T003936/Express0013.lzma
2016-11-09T01:08:47.836Z,1478653727.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:48.297Z,1478653728.297 [DataOverHttps](INFO): Moved sent file to Logs/20161109T003936/Express0013.lzma.bak
2016-11-09T01:08:48.297Z,1478653728.297 [DataOverHttps](INFO): SBD MOMSN=4553056
2016-11-09T01:08:48.632Z,1478653728.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:49.388Z,1478653729.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:50.184Z,1478653730.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:50.980Z,1478653730.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:51.384Z,1478653731.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:52.180Z,1478653732.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:52.808Z,1478653732.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:52.927Z,1478653732.927 [Default:CheckIn:Read_Iridium] Stopped
2016-11-09T01:08:52.928Z,1478653732.928 [Default:CheckIn:C.Wait] Running Loop=1
2016-11-09T01:08:52.928Z,1478653732.928 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2016-11-09T01:08:53.604Z,1478653733.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:54.402Z,1478653734.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:54.820Z,1478653734.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:55.616Z,1478653735.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:56.412Z,1478653736.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:56.816Z,1478653736.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:57.612Z,1478653737.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:58.409Z,1478653738.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:58.900Z,1478653738.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:08:59.696Z,1478653739.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:00.492Z,1478653740.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:00.980Z,1478653740.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:01.777Z,1478653741.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:02.572Z,1478653742.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:03.368Z,1478653743.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:03.772Z,1478653743.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:04.569Z,1478653744.569 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:05.364Z,1478653745.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:05.768Z,1478653745.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:06.564Z,1478653746.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:06.968Z,1478653746.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:07.764Z,1478653747.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:08.041Z,1478653748.041 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2016-11-09T01:09:08.560Z,1478653748.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:08.964Z,1478653748.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:09.760Z,1478653749.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:10.556Z,1478653750.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:10.960Z,1478653750.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:11.756Z,1478653751.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:12.552Z,1478653752.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:12.956Z,1478653752.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:13.641Z,1478653753.641 [NAL9602](INFO): Powering down
2016-11-09T01:09:13.752Z,1478653753.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:14.548Z,1478653754.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:14.952Z,1478653754.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:15.748Z,1478653755.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:16.544Z,1478653756.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:17.340Z,1478653757.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:17.744Z,1478653757.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:18.540Z,1478653758.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:19.328Z,1478653759.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:20.124Z,1478653760.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:20.756Z,1478653760.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:21.552Z,1478653761.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:22.348Z,1478653762.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:22.756Z,1478653762.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:23.552Z,1478653763.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:24.348Z,1478653764.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:24.752Z,1478653764.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:25.548Z,1478653765.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:26.355Z,1478653766.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:26.784Z,1478653766.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:27.592Z,1478653767.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:28.388Z,1478653768.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:28.936Z,1478653768.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:29.732Z,1478653769.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:30.528Z,1478653770.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:31.324Z,1478653771.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:31.728Z,1478653771.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:32.524Z,1478653772.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:33.320Z,1478653773.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:33.724Z,1478653773.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:34.520Z,1478653774.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:34.924Z,1478653774.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:35.721Z,1478653775.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:36.516Z,1478653776.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:36.920Z,1478653776.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:37.716Z,1478653777.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:38.512Z,1478653778.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:38.916Z,1478653778.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:39.712Z,1478653779.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:40.508Z,1478653780.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:40.912Z,1478653780.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:41.708Z,1478653781.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:42.504Z,1478653782.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:42.928Z,1478653782.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:43.724Z,1478653783.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:44.520Z,1478653784.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:45.316Z,1478653785.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:45.720Z,1478653785.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:46.516Z,1478653786.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:47.312Z,1478653787.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:47.333Z,1478653787.333 [CBIT](DEBUG): EFC running - data check-sum false
2016-11-09T01:09:47.716Z,1478653787.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:48.512Z,1478653788.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:48.916Z,1478653788.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:49.712Z,1478653789.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:50.508Z,1478653790.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:50.912Z,1478653790.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:51.708Z,1478653791.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:52.504Z,1478653792.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:52.908Z,1478653792.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:53.704Z,1478653793.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:54.500Z,1478653794.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:54.904Z,1478653794.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:55.700Z,1478653795.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:56.496Z,1478653796.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:56.900Z,1478653796.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:57.696Z,1478653797.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:58.492Z,1478653798.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:59.288Z,1478653799.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:09:59.692Z,1478653799.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:00.476Z,1478653800.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:10:00.476Z,1478653800.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2016-11-09T01:10:00.477Z,1478653800.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T01:10:00.479Z,1478653800.479 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:10:00.479Z,1478653800.479 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 9
2016-11-09T01:10:00.479Z,1478653800.479 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T01:10:00.488Z,1478653800.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:00.514Z,1478653800.514 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T01:10:00.514Z,1478653800.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T01:10:00.942Z,1478653800.942 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T01:10:00.942Z,1478653800.943 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2016-11-09T01:10:00.947Z,1478653800.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T01:10:00.947Z,1478653800.947 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 9
2016-11-09T01:10:01.274Z,1478653801.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T01:10:01.275Z,1478653801.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:10:01.275Z,1478653801.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:10:01.275Z,1478653801.276 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T01:10:01.276Z,1478653801.276 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:10:01.276Z,1478653801.276 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:10:01.284Z,1478653801.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:01.688Z,1478653801.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:02.484Z,1478653802.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:02.888Z,1478653802.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:03.684Z,1478653803.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:04.480Z,1478653804.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:04.884Z,1478653804.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:05.680Z,1478653805.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:06.476Z,1478653806.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:06.880Z,1478653806.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:07.676Z,1478653807.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:08.472Z,1478653808.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:08.876Z,1478653808.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:09.672Z,1478653809.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:10.468Z,1478653810.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:10.916Z,1478653810.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:11.712Z,1478653811.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:12.508Z,1478653812.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:13.276Z,1478653813.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:14.072Z,1478653814.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:14.453Z,1478653814.453 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:10:14.453Z,1478653814.453 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:10:14.453Z,1478653814.453 [BPC1](ERROR): Communications Fault
2016-11-09T01:10:14.486Z,1478653814.486 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:10:14.868Z,1478653814.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:15.292Z,1478653815.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:15.725Z,1478653815.725 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:10:15.725Z,1478653815.725 [BPC1] No Fault, FailCount= 1
2016-11-09T01:10:16.088Z,1478653816.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:16.674Z,1478653816.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:17.468Z,1478653817.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:18.264Z,1478653818.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:18.668Z,1478653818.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:19.464Z,1478653819.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:20.260Z,1478653820.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:20.668Z,1478653820.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:21.464Z,1478653821.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:22.261Z,1478653822.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:22.696Z,1478653822.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:23.492Z,1478653823.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:24.288Z,1478653824.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:24.876Z,1478653824.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:25.672Z,1478653825.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:26.468Z,1478653826.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:27.245Z,1478653827.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:28.041Z,1478653828.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:28.836Z,1478653828.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:29.252Z,1478653829.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:30.048Z,1478653830.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:30.652Z,1478653830.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:31.448Z,1478653831.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:32.244Z,1478653832.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:32.668Z,1478653832.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:33.464Z,1478653833.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:34.260Z,1478653834.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:34.461Z,1478653834.461 [BPC1](ERROR): Failed to parse message.
2016-11-09T01:10:34.461Z,1478653834.461 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-09T01:10:34.461Z,1478653834.461 [BPC1] Data Fault, FailCount= 1
2016-11-09T01:10:34.461Z,1478653834.461 [BPC1](ERROR): Data Fault
2016-11-09T01:10:34.511Z,1478653834.511 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T01:10:34.664Z,1478653834.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:35.460Z,1478653835.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:35.725Z,1478653835.726 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:10:35.725Z,1478653835.726 [BPC1] No Fault, FailCount= 1
2016-11-09T01:10:36.257Z,1478653836.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:36.672Z,1478653836.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:37.468Z,1478653837.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:38.264Z,1478653838.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:38.808Z,1478653838.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:39.604Z,1478653839.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:40.400Z,1478653840.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:41.196Z,1478653841.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:41.600Z,1478653841.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:42.396Z,1478653842.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:43.192Z,1478653843.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:43.596Z,1478653843.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:44.392Z,1478653844.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:44.796Z,1478653844.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:45.592Z,1478653845.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:46.388Z,1478653846.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:46.792Z,1478653846.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:47.588Z,1478653847.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:48.384Z,1478653848.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:48.788Z,1478653848.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:49.584Z,1478653849.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:50.382Z,1478653850.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:50.788Z,1478653850.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:51.584Z,1478653851.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:52.381Z,1478653852.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:52.788Z,1478653852.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:53.584Z,1478653853.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:54.382Z,1478653854.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:55.176Z,1478653855.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:55.580Z,1478653855.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:56.376Z,1478653856.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:57.172Z,1478653857.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:57.576Z,1478653857.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:58.372Z,1478653858.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:58.776Z,1478653858.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:10:59.572Z,1478653859.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:00.368Z,1478653860.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:00.772Z,1478653860.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:01.568Z,1478653861.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:02.364Z,1478653862.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:02.768Z,1478653862.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:03.564Z,1478653863.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:04.360Z,1478653864.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:04.764Z,1478653864.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:05.560Z,1478653865.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:06.356Z,1478653866.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:06.840Z,1478653866.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:07.636Z,1478653867.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:08.432Z,1478653868.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:09.212Z,1478653869.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:10.008Z,1478653870.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:10.804Z,1478653870.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:11.208Z,1478653871.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:12.004Z,1478653872.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:12.584Z,1478653872.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:13.380Z,1478653873.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:14.176Z,1478653874.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:14.584Z,1478653874.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:15.380Z,1478653875.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:16.176Z,1478653876.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:16.580Z,1478653876.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:17.376Z,1478653877.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:18.173Z,1478653878.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:18.612Z,1478653878.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:19.410Z,1478653879.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:20.204Z,1478653880.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:20.792Z,1478653880.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:21.588Z,1478653881.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:22.384Z,1478653882.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:23.176Z,1478653883.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:23.972Z,1478653883.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:24.768Z,1478653884.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:25.172Z,1478653885.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:25.968Z,1478653885.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:26.564Z,1478653886.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:27.360Z,1478653887.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:28.156Z,1478653888.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:28.564Z,1478653888.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:29.360Z,1478653889.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:30.156Z,1478653890.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:30.560Z,1478653890.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:31.153Z,1478653891.153 [BPC1](ERROR): Failed to parse bank A battery data
2016-11-09T01:11:31.153Z,1478653891.153 [BPC1] Data Fault, FailCount= 1
2016-11-09T01:11:31.153Z,1478653891.153 [BPC1](ERROR): Data Fault
2016-11-09T01:11:31.231Z,1478653891.231 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T01:11:31.356Z,1478653891.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:32.153Z,1478653892.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:32.431Z,1478653892.431 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:11:32.431Z,1478653892.431 [BPC1] No Fault, FailCount= 1
2016-11-09T01:11:32.592Z,1478653892.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:33.388Z,1478653893.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:34.186Z,1478653894.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:34.728Z,1478653894.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:35.524Z,1478653895.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:36.340Z,1478653896.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:36.745Z,1478653896.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:37.112Z,1478653897.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:37.145Z,1478653897.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:37.545Z,1478653897.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:37.908Z,1478653897.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:37.952Z,1478653897.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:38.342Z,1478653898.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:38.704Z,1478653898.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:38.762Z,1478653898.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:39.112Z,1478653899.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:39.145Z,1478653899.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:39.545Z,1478653899.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:39.908Z,1478653899.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:39.949Z,1478653899.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:40.353Z,1478653900.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:40.544Z,1478653900.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:40.745Z,1478653900.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:41.149Z,1478653901.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:41.340Z,1478653901.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:41.549Z,1478653901.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:41.953Z,1478653901.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:42.136Z,1478653902.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:42.359Z,1478653902.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:42.552Z,1478653902.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:42.745Z,1478653902.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:43.153Z,1478653903.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:43.348Z,1478653903.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:43.549Z,1478653903.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:43.945Z,1478653903.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:44.144Z,1478653904.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:44.353Z,1478653904.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:44.548Z,1478653904.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:44.745Z,1478653904.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:45.151Z,1478653905.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:45.344Z,1478653905.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:45.545Z,1478653905.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:45.953Z,1478653905.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:46.141Z,1478653906.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:46.351Z,1478653906.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:46.568Z,1478653906.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:46.754Z,1478653906.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:47.158Z,1478653907.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:47.364Z,1478653907.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:47.553Z,1478653907.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:47.945Z,1478653907.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:48.160Z,1478653908.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:48.345Z,1478653908.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:48.704Z,1478653908.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:48.745Z,1478653908.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:49.145Z,1478653909.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:49.500Z,1478653909.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:49.549Z,1478653909.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:49.952Z,1478653909.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:50.296Z,1478653910.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:50.353Z,1478653910.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:50.759Z,1478653910.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:51.092Z,1478653911.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:51.148Z,1478653911.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:51.552Z,1478653911.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:51.888Z,1478653911.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:51.952Z,1478653911.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:52.353Z,1478653912.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:52.684Z,1478653912.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:52.756Z,1478653912.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:53.092Z,1478653913.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:53.145Z,1478653913.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:53.545Z,1478653913.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:53.888Z,1478653913.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:53.953Z,1478653913.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:54.345Z,1478653914.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:54.560Z,1478653914.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:55.356Z,1478653915.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:56.152Z,1478653916.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:56.556Z,1478653916.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:57.352Z,1478653917.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:57.775Z,1478653917.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:57.886Z,1478653917.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:58.148Z,1478653918.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:58.293Z,1478653918.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:58.552Z,1478653918.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:58.689Z,1478653918.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:59.081Z,1478653919.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:59.348Z,1478653919.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:59.496Z,1478653919.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:11:59.881Z,1478653919.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:00.144Z,1478653920.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:00.289Z,1478653920.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:00.548Z,1478653920.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:00.685Z,1478653920.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:01.085Z,1478653921.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:01.344Z,1478653921.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:01.485Z,1478653921.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:01.889Z,1478653921.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:02.140Z,1478653922.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:02.286Z,1478653922.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:02.688Z,1478653922.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:02.724Z,1478653922.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:03.096Z,1478653923.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:03.488Z,1478653923.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:03.520Z,1478653923.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:03.890Z,1478653923.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:04.288Z,1478653924.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:04.316Z,1478653924.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:04.683Z,1478653924.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:05.081Z,1478653925.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:05.112Z,1478653925.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:05.485Z,1478653925.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:05.516Z,1478653925.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:05.881Z,1478653925.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:06.281Z,1478653926.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:06.312Z,1478653926.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:06.694Z,1478653926.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:07.081Z,1478653927.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:07.108Z,1478653927.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:07.481Z,1478653927.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:07.512Z,1478653927.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:07.889Z,1478653927.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:08.286Z,1478653928.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:08.308Z,1478653928.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:08.688Z,1478653928.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:08.712Z,1478653928.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:09.093Z,1478653929.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:09.493Z,1478653929.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:09.508Z,1478653929.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:09.889Z,1478653929.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:10.298Z,1478653930.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:10.304Z,1478653930.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:10.681Z,1478653930.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:10.708Z,1478653930.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:11.089Z,1478653931.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:11.489Z,1478653931.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:11.504Z,1478653931.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:11.887Z,1478653931.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:12.288Z,1478653932.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:12.300Z,1478653932.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:12.692Z,1478653932.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:12.704Z,1478653932.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:13.089Z,1478653933.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:13.481Z,1478653933.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:13.500Z,1478653933.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:13.881Z,1478653933.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:14.281Z,1478653934.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:14.296Z,1478653934.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:14.681Z,1478653934.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:14.700Z,1478653934.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:15.088Z,1478653935.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:15.485Z,1478653935.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:15.496Z,1478653935.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:15.890Z,1478653935.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:16.288Z,1478653936.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:16.292Z,1478653936.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:16.688Z,1478653936.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:16.696Z,1478653936.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:17.090Z,1478653937.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:17.492Z,1478653937.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:17.497Z,1478653937.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:17.884Z,1478653937.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:18.288Z,1478653938.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:18.289Z,1478653938.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:18.686Z,1478653938.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:19.048Z,1478653939.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:19.081Z,1478653939.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:19.482Z,1478653939.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:19.844Z,1478653939.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:19.882Z,1478653939.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:20.282Z,1478653940.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:20.640Z,1478653940.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:20.687Z,1478653940.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:21.048Z,1478653941.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:21.086Z,1478653941.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:21.487Z,1478653941.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:21.844Z,1478653941.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:21.890Z,1478653941.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:22.288Z,1478653942.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:22.480Z,1478653942.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:22.691Z,1478653942.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:23.088Z,1478653943.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:23.276Z,1478653943.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:23.488Z,1478653943.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:23.881Z,1478653943.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:24.072Z,1478653944.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:24.281Z,1478653944.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:24.476Z,1478653944.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:24.681Z,1478653944.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:25.081Z,1478653945.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:25.272Z,1478653945.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:25.488Z,1478653945.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:25.885Z,1478653945.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:26.068Z,1478653946.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:26.293Z,1478653946.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:26.472Z,1478653946.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:26.681Z,1478653946.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:27.081Z,1478653947.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:27.268Z,1478653947.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:27.485Z,1478653947.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:27.889Z,1478653947.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:28.076Z,1478653948.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:28.287Z,1478653948.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:28.504Z,1478653948.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:28.681Z,1478653948.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:29.081Z,1478653949.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:29.300Z,1478653949.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:29.481Z,1478653949.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:29.881Z,1478653949.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:30.096Z,1478653950.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:30.293Z,1478653950.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:30.624Z,1478653950.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:30.681Z,1478653950.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:31.081Z,1478653951.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:31.420Z,1478653951.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:31.490Z,1478653951.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:31.886Z,1478653951.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:32.216Z,1478653952.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:32.285Z,1478653952.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:32.688Z,1478653952.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:33.012Z,1478653953.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:33.089Z,1478653953.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:33.416Z,1478653953.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:33.488Z,1478653953.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:33.889Z,1478653953.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:34.212Z,1478653954.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:34.289Z,1478653954.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:34.681Z,1478653954.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:35.008Z,1478653955.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:35.092Z,1478653955.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:35.412Z,1478653955.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:35.481Z,1478653955.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:35.881Z,1478653955.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:36.208Z,1478653956.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:36.281Z,1478653956.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:36.612Z,1478653956.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:36.681Z,1478653956.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:37.089Z,1478653957.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:37.408Z,1478653957.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:37.481Z,1478653957.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:37.881Z,1478653957.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:38.204Z,1478653958.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:38.287Z,1478653958.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:38.608Z,1478653958.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:38.689Z,1478653958.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:39.087Z,1478653959.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:39.404Z,1478653959.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:39.493Z,1478653959.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:39.889Z,1478653959.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:40.200Z,1478653960.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:40.281Z,1478653960.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:40.604Z,1478653960.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:40.681Z,1478653960.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:41.081Z,1478653961.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:41.400Z,1478653961.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:41.481Z,1478653961.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:41.881Z,1478653961.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:42.196Z,1478653962.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:42.292Z,1478653962.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:42.600Z,1478653962.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:42.681Z,1478653962.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:43.094Z,1478653963.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:43.396Z,1478653963.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:43.487Z,1478653963.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:43.888Z,1478653963.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:44.193Z,1478653964.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:44.296Z,1478653964.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:44.604Z,1478653964.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:44.689Z,1478653964.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:45.081Z,1478653965.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:45.400Z,1478653965.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:45.486Z,1478653965.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:45.504Z,1478653965.504 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:12:45.504Z,1478653965.504 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:12:45.504Z,1478653965.504 [BPC1](ERROR): Communications Fault
2016-11-09T01:12:45.535Z,1478653965.535 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:12:45.881Z,1478653965.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:46.199Z,1478653966.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:46.281Z,1478653966.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:46.689Z,1478653966.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:46.742Z,1478653966.742 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:12:46.743Z,1478653966.743 [BPC1] No Fault, FailCount= 1
2016-11-09T01:12:46.996Z,1478653966.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:47.081Z,1478653967.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:47.400Z,1478653967.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:47.481Z,1478653967.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:47.889Z,1478653967.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:48.196Z,1478653968.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:48.288Z,1478653968.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:48.688Z,1478653968.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:48.993Z,1478653968.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:49.095Z,1478653969.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:49.400Z,1478653969.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:49.488Z,1478653969.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:49.881Z,1478653969.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:50.196Z,1478653970.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:50.289Z,1478653970.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:50.600Z,1478653970.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:50.681Z,1478653970.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:51.081Z,1478653971.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:51.396Z,1478653971.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:51.486Z,1478653971.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:51.888Z,1478653971.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:52.192Z,1478653972.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:52.281Z,1478653972.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:52.596Z,1478653972.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:52.681Z,1478653972.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:53.087Z,1478653973.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:53.392Z,1478653973.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:53.486Z,1478653973.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:53.889Z,1478653973.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:54.190Z,1478653974.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:54.292Z,1478653974.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:54.596Z,1478653974.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:54.681Z,1478653974.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:55.393Z,1478653975.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:56.188Z,1478653976.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:56.593Z,1478653976.593 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:57.388Z,1478653977.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.050Z,1478653978.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.184Z,1478653978.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.196Z,1478653978.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.530Z,1478653978.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.632Z,1478653978.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:58.917Z,1478653978.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:59.317Z,1478653979.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:59.428Z,1478653979.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:12:59.717Z,1478653979.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:00.117Z,1478653980.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:00.224Z,1478653980.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:00.517Z,1478653980.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:00.917Z,1478653980.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:01.008Z,1478653981.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:01.325Z,1478653981.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:01.374Z,1478653981.374 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:13:01.374Z,1478653981.374 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2016-11-09T01:13:01.374Z,1478653981.374 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2016-11-09T01:13:01.376Z,1478653981.376 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2016-11-09T01:13:01.376Z,1478653981.376 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 10
2016-11-09T01:13:01.376Z,1478653981.376 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2016-11-09T01:13:01.390Z,1478653981.390 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2016-11-09T01:13:01.391Z,1478653981.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2016-11-09T01:13:01.724Z,1478653981.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:01.804Z,1478653981.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:01.806Z,1478653981.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2016-11-09T01:13:01.806Z,1478653981.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2016-11-09T01:13:01.807Z,1478653981.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2016-11-09T01:13:01.807Z,1478653981.807 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 10
2016-11-09T01:13:02.125Z,1478653982.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:02.150Z,1478653982.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2016-11-09T01:13:02.151Z,1478653982.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:13:02.151Z,1478653982.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:13:02.152Z,1478653982.152 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2016-11-09T01:13:02.152Z,1478653982.152 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2016-11-09T01:13:02.153Z,1478653982.152 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2016-11-09T01:13:02.557Z,1478653982.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:02.600Z,1478653982.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:02.925Z,1478653982.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:03.004Z,1478653983.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:03.324Z,1478653983.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:03.724Z,1478653983.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:03.800Z,1478653983.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:04.117Z,1478653984.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:04.432Z,1478653984.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:04.517Z,1478653984.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:04.921Z,1478653984.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:05.228Z,1478653985.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:05.317Z,1478653985.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:05.717Z,1478653985.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:06.026Z,1478653986.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:06.128Z,1478653986.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:06.432Z,1478653986.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:06.517Z,1478653986.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:06.917Z,1478653986.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:07.228Z,1478653987.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:07.317Z,1478653987.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:07.717Z,1478653987.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:08.028Z,1478653988.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:08.117Z,1478653988.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:08.432Z,1478653988.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:08.533Z,1478653988.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:08.917Z,1478653988.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:09.231Z,1478653989.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:09.317Z,1478653989.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:09.717Z,1478653989.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:10.028Z,1478653990.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:10.125Z,1478653990.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:10.432Z,1478653990.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:10.517Z,1478653990.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:10.917Z,1478653990.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:11.228Z,1478653991.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:11.317Z,1478653991.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:11.721Z,1478653991.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.025Z,1478653992.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.127Z,1478653992.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.521Z,1478653992.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.628Z,1478653992.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.917Z,1478653992.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:12.926Z,1478653992.926 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-09T01:13:12.926Z,1478653992.926 [BPC1] Data Fault, FailCount= 1
2016-11-09T01:13:12.926Z,1478653992.926 [BPC1](ERROR): Data Fault
2016-11-09T01:13:12.980Z,1478653992.980 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T01:13:13.325Z,1478653993.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:13.424Z,1478653993.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:13.720Z,1478653993.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:14.120Z,1478653994.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:14.193Z,1478653994.193 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:13:14.193Z,1478653994.193 [BPC1] No Fault, FailCount= 1
2016-11-09T01:13:14.220Z,1478653994.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:14.564Z,1478653994.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:14.924Z,1478653994.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:14.996Z,1478653994.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:15.336Z,1478653995.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:15.737Z,1478653995.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:15.792Z,1478653995.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:16.117Z,1478653996.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:16.563Z,1478653996.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:16.588Z,1478653996.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:16.921Z,1478653996.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:17.004Z,1478653997.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:17.317Z,1478653997.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:17.717Z,1478653997.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:17.800Z,1478653997.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:18.116Z,1478653998.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:18.396Z,1478653998.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:18.517Z,1478653998.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:18.921Z,1478653998.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:19.192Z,1478653999.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:19.321Z,1478653999.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:19.725Z,1478653999.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:19.988Z,1478653999.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:20.130Z,1478654000.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:20.392Z,1478654000.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:20.525Z,1478654000.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:20.925Z,1478654000.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:21.188Z,1478654001.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:21.325Z,1478654001.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:21.725Z,1478654001.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:21.984Z,1478654001.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:22.133Z,1478654002.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:22.388Z,1478654002.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:22.517Z,1478654002.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:22.917Z,1478654002.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:23.184Z,1478654003.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:23.317Z,1478654003.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:23.717Z,1478654003.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:23.984Z,1478654003.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:24.125Z,1478654004.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:24.412Z,1478654004.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:24.517Z,1478654004.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:24.917Z,1478654004.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:25.208Z,1478654005.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:25.317Z,1478654005.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:25.717Z,1478654005.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:26.004Z,1478654006.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:26.130Z,1478654006.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:26.524Z,1478654006.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:26.580Z,1478654006.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:26.923Z,1478654006.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:27.328Z,1478654007.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:27.376Z,1478654007.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:27.723Z,1478654007.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:28.123Z,1478654008.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:28.172Z,1478654008.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:28.530Z,1478654008.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:28.919Z,1478654008.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:28.968Z,1478654008.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:29.321Z,1478654009.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:29.372Z,1478654009.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:29.717Z,1478654009.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:30.117Z,1478654010.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:30.168Z,1478654010.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:30.541Z,1478654010.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:30.917Z,1478654010.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:30.964Z,1478654010.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:31.317Z,1478654011.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:31.368Z,1478654011.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:31.722Z,1478654011.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:32.122Z,1478654012.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:32.164Z,1478654012.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:32.525Z,1478654012.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:32.568Z,1478654012.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:32.925Z,1478654012.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:33.324Z,1478654013.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:33.364Z,1478654013.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:33.725Z,1478654013.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:34.125Z,1478654014.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:34.160Z,1478654014.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:34.517Z,1478654014.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:34.564Z,1478654014.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:34.917Z,1478654014.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:35.317Z,1478654015.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:35.360Z,1478654015.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:35.717Z,1478654015.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:36.117Z,1478654016.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:36.156Z,1478654016.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:36.517Z,1478654016.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:36.560Z,1478654016.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:36.925Z,1478654016.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:37.317Z,1478654017.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:37.356Z,1478654017.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:37.725Z,1478654017.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:38.129Z,1478654018.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:38.164Z,1478654018.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:38.524Z,1478654018.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:38.568Z,1478654018.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:38.927Z,1478654018.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:39.324Z,1478654019.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:39.376Z,1478654019.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:39.728Z,1478654019.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:40.132Z,1478654020.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:40.172Z,1478654020.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:40.517Z,1478654020.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:40.576Z,1478654020.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:40.917Z,1478654020.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:41.321Z,1478654021.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:41.372Z,1478654021.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:41.725Z,1478654021.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:42.123Z,1478654022.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:42.168Z,1478654022.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:42.528Z,1478654022.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:42.925Z,1478654022.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:42.952Z,1478654022.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:43.317Z,1478654023.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:43.717Z,1478654023.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:43.748Z,1478654023.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:44.117Z,1478654024.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:44.519Z,1478654024.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:44.544Z,1478654024.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:44.917Z,1478654024.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:44.976Z,1478654024.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:45.317Z,1478654025.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:45.717Z,1478654025.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:45.772Z,1478654025.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:46.125Z,1478654026.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:46.340Z,1478654026.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:46.525Z,1478654026.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:46.917Z,1478654026.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:47.136Z,1478654027.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:47.330Z,1478654027.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:47.717Z,1478654027.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:47.932Z,1478654027.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:48.117Z,1478654028.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:48.344Z,1478654028.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:48.523Z,1478654028.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:48.924Z,1478654028.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:49.140Z,1478654029.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:49.325Z,1478654029.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:49.725Z,1478654029.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:49.936Z,1478654029.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:50.128Z,1478654030.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:50.340Z,1478654030.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:50.517Z,1478654030.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:50.932Z,1478654030.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:51.136Z,1478654031.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:51.317Z,1478654031.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:51.717Z,1478654031.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:51.935Z,1478654031.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:52.125Z,1478654032.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:52.364Z,1478654032.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:52.517Z,1478654032.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:52.917Z,1478654032.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:53.160Z,1478654033.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:53.321Z,1478654033.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:53.375Z,1478654033.375 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2016-11-09T01:13:53.380Z,1478654033.379 [Default:CheckIn:C.Wait] Stopped
2016-11-09T01:13:53.380Z,1478654033.380 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2016-11-09T01:13:53.380Z,1478654033.380 [Default:CheckIn:D] Running Loop=1
2016-11-09T01:13:53.722Z,1478654033.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:53.784Z,1478654033.784 [Default:CheckIn:D] Stopped
2016-11-09T01:13:53.785Z,1478654033.784 [Default:CheckIn:E] Running Loop=1
2016-11-09T01:13:53.956Z,1478654033.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:54.137Z,1478654034.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:54.176Z,1478654034.176 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 30.375637 min 
2016-11-09T01:13:54.176Z,1478654034.176 [Default:CheckIn:E] Stopped
2016-11-09T01:13:54.176Z,1478654034.176 [Default:CheckIn](INFO): Completed Default:CheckIn
2016-11-09T01:13:54.176Z,1478654034.176 [Default:CheckIn] Stopped
2016-11-09T01:13:54.176Z,1478654034.177 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-09T01:13:54.177Z,1478654034.177 [Default:CheckIn](INFO): Running loop #4
2016-11-09T01:13:54.177Z,1478654034.177 [Default:CheckIn] Running Loop=4
2016-11-09T01:13:54.177Z,1478654034.177 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2016-11-09T01:13:54.177Z,1478654034.177 [Default:CheckIn:Read_GPS] Running Loop=1
2016-11-09T01:13:54.508Z,1478654034.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:54.520Z,1478654034.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:54.901Z,1478654034.901 [NAL9602](INFO): Powering up
2016-11-09T01:13:54.918Z,1478654034.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:55.304Z,1478654035.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:56.101Z,1478654036.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:56.896Z,1478654036.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:57.692Z,1478654037.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:58.258Z,1478654038.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:58.488Z,1478654038.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:58.493Z,1478654038.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:58.824Z,1478654038.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:58.936Z,1478654038.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:59.222Z,1478654039.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:59.621Z,1478654039.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:13:59.732Z,1478654039.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:00.021Z,1478654040.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:00.320Z,1478654040.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:01.116Z,1478654041.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:01.913Z,1478654041.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:02.322Z,1478654042.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:03.116Z,1478654043.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:03.912Z,1478654043.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:04.316Z,1478654044.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:05.114Z,1478654045.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:05.909Z,1478654045.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:06.005Z,1478654046.005 [NAL9602](INFO): NAL9602 initialized
2016-11-09T01:14:06.344Z,1478654046.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:06.797Z,1478654046.797 [NAL9602](FAULT): GPS failed to acquire within timeout.
2016-11-09T01:14:06.797Z,1478654046.797 [NAL9602] Data Fault, FailCount= 3
2016-11-09T01:14:06.797Z,1478654046.797 [NAL9602](ERROR): Data Fault
2016-11-09T01:14:06.894Z,1478654046.894 [CBIT](ERROR): Data Fault in component: NAL9602
2016-11-09T01:14:07.140Z,1478654047.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:07.205Z,1478654047.205 [NAL9602](INFO): Powering down
2016-11-09T01:14:07.936Z,1478654047.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:08.126Z,1478654048.126 [CBIT](INFO): Clearing failed state for component NAL9602
2016-11-09T01:14:08.126Z,1478654048.126 [NAL9602] No Fault, FailCount= 3
2016-11-09T01:14:08.504Z,1478654048.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:09.300Z,1478654049.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:10.096Z,1478654050.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:10.892Z,1478654050.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:11.296Z,1478654051.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:12.092Z,1478654052.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:12.397Z,1478654052.397 [NAL9602](INFO): Powering up NAL9602
2016-11-09T01:14:12.888Z,1478654052.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:13.292Z,1478654053.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:14.104Z,1478654054.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:14.508Z,1478654054.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:15.304Z,1478654055.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:16.100Z,1478654056.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:16.504Z,1478654056.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:17.300Z,1478654057.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:18.096Z,1478654058.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:18.500Z,1478654058.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:19.296Z,1478654059.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:20.092Z,1478654060.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:20.496Z,1478654060.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:21.292Z,1478654061.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:22.088Z,1478654062.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:22.492Z,1478654062.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:23.288Z,1478654063.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:23.605Z,1478654063.605 [NAL9602](INFO): NAL9602 initialized
2016-11-09T01:14:24.084Z,1478654064.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:24.880Z,1478654064.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:25.244Z,1478654065.244 [BPC1](ERROR): Failed to parse bank B battery data
2016-11-09T01:14:25.244Z,1478654065.244 [BPC1] Data Fault, FailCount= 1
2016-11-09T01:14:25.244Z,1478654065.244 [BPC1](ERROR): Data Fault
2016-11-09T01:14:25.278Z,1478654065.278 [CBIT](ERROR): Data Fault in component: BPC1
2016-11-09T01:14:25.284Z,1478654065.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:26.080Z,1478654066.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:26.533Z,1478654066.533 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:14:26.533Z,1478654066.533 [BPC1] No Fault, FailCount= 1
2016-11-09T01:14:26.852Z,1478654066.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:27.648Z,1478654067.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:28.280Z,1478654068.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:29.076Z,1478654069.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:29.872Z,1478654069.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:30.276Z,1478654070.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:31.072Z,1478654071.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:31.868Z,1478654071.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:32.272Z,1478654072.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:33.068Z,1478654073.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:33.865Z,1478654073.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:34.300Z,1478654074.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:35.096Z,1478654075.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:35.892Z,1478654075.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:36.500Z,1478654076.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:37.296Z,1478654077.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:38.093Z,1478654078.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:38.888Z,1478654078.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:39.292Z,1478654079.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:40.088Z,1478654080.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:40.884Z,1478654080.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:41.288Z,1478654081.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:42.084Z,1478654082.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:42.449Z,1478654082.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:42.488Z,1478654082.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:42.831Z,1478654082.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:43.237Z,1478654083.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:43.284Z,1478654083.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:43.624Z,1478654083.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:44.013Z,1478654084.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:44.080Z,1478654084.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:44.414Z,1478654084.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:44.484Z,1478654084.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:44.817Z,1478654084.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:45.221Z,1478654085.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:45.280Z,1478654085.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:45.622Z,1478654085.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:46.020Z,1478654086.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:46.076Z,1478654086.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:46.413Z,1478654086.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:46.480Z,1478654086.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:46.814Z,1478654086.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:47.213Z,1478654087.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:47.276Z,1478654087.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:47.628Z,1478654087.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:48.028Z,1478654088.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:48.072Z,1478654088.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:48.428Z,1478654088.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:48.476Z,1478654088.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:48.824Z,1478654088.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:49.222Z,1478654089.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:49.272Z,1478654089.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:49.621Z,1478654089.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:50.022Z,1478654090.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:50.068Z,1478654090.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:50.422Z,1478654090.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:50.472Z,1478654090.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:50.813Z,1478654090.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:51.213Z,1478654091.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:51.268Z,1478654091.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:51.618Z,1478654091.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:52.014Z,1478654092.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:52.064Z,1478654092.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:52.451Z,1478654092.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:52.820Z,1478654092.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:52.837Z,1478654092.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:53.226Z,1478654093.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:53.616Z,1478654093.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:53.634Z,1478654093.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:54.051Z,1478654094.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:54.412Z,1478654094.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:54.421Z,1478654094.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:54.820Z,1478654094.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:54.856Z,1478654094.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:55.217Z,1478654095.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:55.652Z,1478654095.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:56.236Z,1478654096.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:56.839Z,1478654096.839 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:14:56.839Z,1478654096.839 [BPC1] Communications Fault, FailCount= 1
2016-11-09T01:14:56.839Z,1478654096.839 [BPC1](ERROR): Communications Fault
2016-11-09T01:14:56.890Z,1478654096.889 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:14:57.032Z,1478654097.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:57.828Z,1478654097.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:58.093Z,1478654098.093 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:14:58.093Z,1478654098.093 [BPC1] No Fault, FailCount= 1
2016-11-09T01:14:58.236Z,1478654098.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:59.032Z,1478654099.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:14:59.828Z,1478654099.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:00.232Z,1478654100.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:01.028Z,1478654101.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:01.617Z,1478654101.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:01.825Z,1478654101.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:02.031Z,1478654102.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:02.256Z,1478654102.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:02.414Z,1478654102.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:02.813Z,1478654102.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:03.052Z,1478654103.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:03.213Z,1478654103.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:03.622Z,1478654103.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:03.848Z,1478654103.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:04.022Z,1478654104.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:04.416Z,1478654104.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:04.421Z,1478654104.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:04.820Z,1478654104.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:05.213Z,1478654105.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:05.215Z,1478654105.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:05.613Z,1478654105.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:06.008Z,1478654106.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:06.015Z,1478654106.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:06.414Z,1478654106.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:06.788Z,1478654106.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:06.826Z,1478654106.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:07.218Z,1478654107.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:07.584Z,1478654107.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:07.637Z,1478654107.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:08.032Z,1478654108.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:08.382Z,1478654108.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:08.427Z,1478654108.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:08.796Z,1478654108.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:08.819Z,1478654108.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:09.221Z,1478654109.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:09.592Z,1478654109.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:09.624Z,1478654109.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:10.030Z,1478654110.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:10.212Z,1478654110.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:10.429Z,1478654110.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:10.839Z,1478654110.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:11.008Z,1478654111.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:11.217Z,1478654111.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:11.628Z,1478654111.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:11.804Z,1478654111.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:12.024Z,1478654112.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:12.224Z,1478654112.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:12.417Z,1478654112.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:12.818Z,1478654112.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:13.020Z,1478654113.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:13.221Z,1478654113.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:13.616Z,1478654113.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:13.816Z,1478654113.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:14.030Z,1478654114.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:14.220Z,1478654114.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:14.432Z,1478654114.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:14.440Z,1478654114.441 [BPC1](ERROR): Failed to receive battery data
2016-11-09T01:15:14.441Z,1478654114.441 [BPC1] Communications Fault, FailCount= 2
2016-11-09T01:15:14.441Z,1478654114.441 [BPC1](ERROR): Communications Fault
2016-11-09T01:15:14.524Z,1478654114.523 [CBIT](ERROR): Communications Fault in component: BPC1
2016-11-09T01:15:14.813Z,1478654114.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:15.016Z,1478654115.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:15.215Z,1478654115.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:15.618Z,1478654115.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:15.670Z,1478654115.670 [CBIT](INFO): Clearing failed state for component BPC1
2016-11-09T01:15:15.670Z,1478654115.670 [BPC1] No Fault, FailCount= 2
2016-11-09T01:15:15.818Z,1478654115.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:16.045Z,1478654116.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:16.236Z,1478654116.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:16.414Z,1478654116.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:16.814Z,1478654116.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:17.032Z,1478654117.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:17.218Z,1478654117.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:17.621Z,1478654117.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:17.828Z,1478654117.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:18.036Z,1478654118.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:18.368Z,1478654118.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:18.416Z,1478654118.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:18.813Z,1478654118.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:19.164Z,1478654119.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:19.213Z,1478654119.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:19.614Z,1478654119.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:19.960Z,1478654119.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:20.024Z,1478654120.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:20.424Z,1478654120.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:20.756Z,1478654120.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:20.819Z,1478654120.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:21.160Z,1478654121.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:21.219Z,1478654121.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:21.614Z,1478654121.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:21.962Z,1478654121.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:22.018Z,1478654122.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:22.417Z,1478654122.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:22.756Z,1478654122.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:22.823Z,1478654122.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:23.160Z,1478654123.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:23.216Z,1478654123.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:23.621Z,1478654123.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:23.956Z,1478654123.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:24.022Z,1478654124.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:24.360Z,1478654124.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:24.435Z,1478654124.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:24.792Z,1478654124.792 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2016-11-09T01:15:24.839Z,1478654124.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:25.156Z,1478654125.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:25.214Z,1478654125.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:25.618Z,1478654125.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:25.952Z,1478654125.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:26.033Z,1478654126.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:26.356Z,1478654126.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:26.381Z,1478654126.381 [CommandLine](IMPORTANT): got command quit
2016-11-09T01:15:26.416Z,1478654126.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:26.822Z,1478654126.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:27.152Z,1478654127.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:27.237Z,1478654127.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:27.407Z,1478654127.407 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:27.415Z,1478654127.415 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.447Z,1478654127.447 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2016-11-09T01:15:27.447Z,1478654127.447 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.448Z,1478654127.448 [CommandLine](INFO): Join timeout helper Thread ID is 1579
2016-11-09T01:15:27.455Z,1478654127.455 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2016-11-09T01:15:27.456Z,1478654127.455 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.456Z,1478654127.456 [NavChartDb](INFO): Join timeout helper Thread ID is 1580
2016-11-09T01:15:27.510Z,1478654127.510 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:27.510Z,1478654127.510 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.523Z,1478654127.523 [ComponentRegistry](INFO): Shutting down Rowe_600LCM ThreadHandler
2016-11-09T01:15:27.523Z,1478654127.523 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.524Z,1478654127.524 [Rowe_600LCM](INFO): Join timeout helper Thread ID is 1581
2016-11-09T01:15:27.621Z,1478654127.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:27.948Z,1478654127.948 [Rowe_600LCM ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:27.948Z,1478654127.948 [Rowe_600LCM](INFO): Powering down
2016-11-09T01:15:27.949Z,1478654127.949 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.972Z,1478654127.972 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2016-11-09T01:15:27.972Z,1478654127.972 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:27.972Z,1478654127.972 [Radio_Surface](INFO): Join timeout helper Thread ID is 1582
2016-11-09T01:15:28.034Z,1478654128.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2016-11-09T01:15:28.240Z,1478654128.240 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:28.240Z,1478654128.240 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.243Z,1478654128.243 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2016-11-09T01:15:28.243Z,1478654128.243 [logger ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.244Z,1478654128.244 [logger](INFO): Join timeout helper Thread ID is 1583
2016-11-09T01:15:28.267Z,1478654128.267 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:28.268Z,1478654128.268 [logger ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.284Z,1478654128.284 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2016-11-09T01:15:28.284Z,1478654128.284 [CommandLine ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.285Z,1478654128.285 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2016-11-09T01:15:28.285Z,1478654128.285 [controlThread ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.285Z,1478654128.285 [controlThread](INFO): Join timeout helper Thread ID is 1584
2016-11-09T01:15:28.387Z,1478654128.387 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2016-11-09T01:15:28.388Z,1478654128.388 [controlThread](DEBUG): Uninitializing ControlThread
2016-11-09T01:15:28.389Z,1478654128.389 [NAL9602](INFO): Powering down
2016-11-09T01:15:28.390Z,1478654128.390 [PNI_TCM](INFO): Powering down
2016-11-09T01:15:28.391Z,1478654128.391 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2016-11-09T01:15:28.393Z,1478654128.393 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2016-11-09T01:15:28.393Z,1478654128.393 [Default] Stopped
2016-11-09T01:15:28.393Z,1478654128.393 [Default](DEBUG): Aggregate::uninitialize Default
2016-11-09T01:15:28.394Z,1478654128.394 [Default:B.GoToSurface] Stopped
2016-11-09T01:15:28.394Z,1478654128.394 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2016-11-09T01:15:28.394Z,1478654128.394 [Default:CheckIn] Stopped
2016-11-09T01:15:28.394Z,1478654128.394 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2016-11-09T01:15:28.394Z,1478654128.394 [Default:CheckIn:Read_GPS] Stopped
2016-11-09T01:15:28.397Z,1478654128.397 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2016-11-09T01:15:28.397Z,1478654128.397 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2016-11-09T01:15:28.397Z,1478654128.397 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2016-11-09T01:15:28.398Z,1478654128.398 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2016-11-09T01:15:28.398Z,1478654128.398 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2016-11-09T01:15:28.398Z,1478654128.398 [BuoyancyServo](INFO): Powering down
2016-11-09T01:15:28.412Z,1478654128.411 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2016-11-09T01:15:28.412Z,1478654128.412 [ElevatorServo](INFO): Powering down
2016-11-09T01:15:28.412Z,1478654128.412 [MassServo](DEBUG): Uninitialize Mass Servo.
2016-11-09T01:15:28.413Z,1478654128.413 [MassServo](INFO): Powering down
2016-11-09T01:15:28.414Z,1478654128.414 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2016-11-09T01:15:28.414Z,1478654128.414 [RudderServo](INFO): Powering down
2016-11-09T01:15:28.414Z,1478654128.414 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2016-11-09T01:15:28.414Z,1478654128.414 [ThrusterServo](INFO): Powering down
2016-11-09T01:15:28.415Z,1478654128.415 [SBIT](DEBUG): Uninitialize SBIT Component.
2016-11-09T01:15:28.416Z,1478654128.416 [IBIT](DEBUG): Uninitialize IBIT Component.
2016-11-09T01:15:28.416Z,1478654128.416 [CBIT](DEBUG): Uninitialize CBIT Component.
2016-11-09T01:15:28.417Z,1478654128.417 [controlThread ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.540Z,1478654128.540 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.570Z,1478654128.570 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.614Z,1478654128.614 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2016-11-09T01:15:28.679Z,1478654128.679 [logger ThreadHandler](INFO): Thread cancelled.